ProSpex® | Soft Square Trim
Soft Square 50 Trim
Soft Square 50 Trim Accent
Soft Square 70 Trim
Square miniature trimmed downlight IP44 available Allow minimum of 25mm above fixture
Square miniature trimmed adjustable downlight Allow minimum of 25mm above fixture
Square trimmed downlight IP44 available Allow minimum of 25mm above fixture
LED
LED
Adj
LED
*
30˚
*
LED35**
050-LED-TR-SQ
LED35**
053-LED-TR-SQ
*LED driver required – specify drive current and dimming protocol if required ** Specify colour temperature and beam distribution Refer to page 22 for LED module information
*LED driver required – specify drive current and dimming protocol if required ** Specify colour temperature and beam distribution Refer to page 22 for LED module information
Low Voltage
Low Voltage
12v
20-35w
MR11 (GU4)
050-MR-TR-SQ
MR11 Retro-fit LED lamp can be installed
12v
20-35w
MR11(GU4)
30˚
MR11 Retro-fit LED lamp can be installed
053-MR-TR-SQ
* *
LED50** XSM 400/700/1000/1300**
070-LED-TR-SQ 070-XSM-TR-SQ
*LED driver required – specify drive current and dimming protocol if required ** Specify colour temperature and beam distribution Refer to pages 24-27 for LED50 module information Refer to pages 34-37 for XSM module information Low Voltage 12v
20-35w
MR16 (GU5.3)
070-MR-TR-SQ
MR16 Retro-fit LED lamp can be installed Metal Halide 240v
20-35w
CMH-MR16 (GX10)
070-MH-TR-SQ
*Metal Halide-Control gear required Mains Voltage *230v
PAR 16/LED (GU10)
070-GU-TR-SQ
X
X 65 x 65
Height - X LED35 105mm • MR11 70mm Ceiling cut out = 61mm x 61mm
68 | www.lucent-lighting.com
X
GU10 Retro-fit LED lamp can be installed
65 x 65
Height - X LED35 100mm • MR11 65mm Ceiling cut out = 61mm x 61mm
90 x 90
Height - X LED50 160mm • XSM 160mm MR16 160mm • CMH MR16 160mm • GU10 160mm Ceiling cut out = 84mm x 84mm