Servo motor’s maintenance and check

Servo motor’s maintenance and check Servo motor is a common industrial motor that often appears in various fields such as automated production lines, machining centers, medical equipment, and semiconductor equipment. This kind of motor has the advantages of high precision, high speed, high anti-interference and so on, so it is loved by the majority of users. In order to ensure the normal operation of this servo motor, its maintenance and upkeep work is particularly important.

1. Regularly check the contact and appearance of the motor cable, especially at the interface where the wire enters the servo motor, because interruptions or disconnections may occur during movement.

2. Regularly check the contact of the motor torque cable and maintain good contact. You can insist on checking once every three months.

3. Regularly check the interface between the motor and the power module and ensure that the connection is firm.

4. Check the servo motor system regularly and keep it clean. In order to prevent dust, oil, liquid and other debris from entering the inside of the motor and causing motor failure, we need to clean the air outlet and radiator of the servo motor regularly and ensure good ventilation.

5. Regularly check the indicator lights and fault codes on the servo motor control board and determine any existing faults.

6. Back up the operating program and parameters before and after the normal operation of the servo motor. Backup programs and parameters can help us quickly restore the normal operation of the motor when necessary.

Maintenance details: 1. For regular maintenance, we need to refuel. Video heads, reflective surfaces, gears, etc. need to be refueled regularly. Here, we need to understand the type of grease required by different parts and the frequency of use.

2. During regular maintenance, we need to check the missing and missing parts and repair or replace them in time. We cannot assume that problematic parts will continue to be used in the future. If the problem part is not repaired or replaced, further damage to other parts of the motor may result.

2. During regular maintenance, we need to conduct a thorough cleaning of the servo motor system. The cables of the servo motor need to be moved and cleaned, usually using a pneumatic electrostatic blower for efficient cleaning.

4. For servo motors that have not been used for a long time, we need to clean, vacuum and inspect them before restarting. This ensures that the motor is in optimal condition before restarting, avoiding any problems when starting to use it.