NEO Hand Held Computer Quick Start Guide - English

Contents of the box:

Features: Alphanumeric Keyboard

Features: Back Battery compartment Stylus

Scan key

Microphone

Getting Started [FN/BLUE] key

1

Unlatch and open the battery compartment.

2

Insert the battery.

3

Close and latch the battery compartment.

Hand-He

ld Com pute

r

September

NEO Hand-Held Computer

PN: 8100 158.A

EULA documents

Scanner window

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

Q

R

S

T

UVW

XYZ

P

Features: Battery Compartment

Features: Front Receiver

Features: Numeric Keyboard

Battery cover Display

[ENTER]/ Power key

Expansion-port cover

This Guide

Lanyard

LED indicator

[FN/ORANGE] key

ISO 9001 Certified Quality Manage ďż˝ ment System

Wrist strap Battery

30, 2008

Battery cover latch

Beeper

[ENTER]/Power key Keyboard

MicroSD Card holder

Accessory attachment point Microphone Accessory attachment point

Docking port Beeper

Battery contacts

Accessory attachment point

Microphone

Scan key [FN/BLUE] key

[FN/ORANGE] key [ENTER]/ Power key

Battery-detection magnet (inside battery cover) Serial number label

$

Over

4

Charge the battery.

Insert the NEO into a Docking Station or connect a charger.

To suspend the NEO, do either of the following:

Hand-Held Computer

Note: During charge, the LED indicator on the NEO is YELLOW until charging reaches 75%.

Between 75% and 95% the indicator flashes GREEN slowly, and, above 95%, the indicator is GREEN continuously.

The LED indicator on the Docking Station behaves the same when a spare battery is being charged.

Resetting the NEO

Allow the NEO to charge for three hours before first use.

41 - 104 °F

5

3h

Quick Start Guide

Important: Resetting the unit may result in data loss.

Note: Use only the universal AC power supply approved

by Psion Teklogix for use with the Docking Station.

5 - 40 °C

™

• Press and release the [FN/BLUE] key, then press the [ENTER] key.

• Select Shutdown, then select Suspend from the Start menu.

September 30, 2008

To warm-reset the NEO: • Press the [BLUE] and [ENTER] keys simultaneously for six seconds, or • Select Shutdown, then select Warm Reset from the Start menu.

Note: Full battery performance is only reached after the first few charge/discharge cycles.

Turn the unit on.

Press the [ENTER]/Power key for two seconds.

[ENTER]/ Power key

[ENTER]/ Power key

Psion Teklogix and NEO are trademarks of Psion Teklogix Inc. Other product names mentioned in this document are trademarks or registered trademarks of other hardware, software, or service providers and are used herein for identification purposes only.

*8100158* 8100158 Rev. A

ISO 9001 Certified Quality Management System

PN: 8100158.A