Spectrumxli catalog

2015 CATALOG

The Evolution of Non-Intrusive External Line Inspection

1

04 What Is Spectrum XLI?

1.1

President’s Message

1.2

The History

1.3

The Evolution

12 What Does It Do?

2.1

Field Solutions 2.1.1 Survey Options

2.2

Software Solutions 2.2.1 XLI Field 2.2.2 XLI Mouse

2.3

Raw Log

2.4

Configurations

24 What Are Its Advantages?

3.1

Single GIS Data Collection

3.2

All in ONE

3.3

Intuitive Design

30 Products & Equipment

70 Training Courses

80 Support & Warranty

XLI Software Credits & Subscriptions

5.1

XLI Falcon

6.1

Calibration

5.2

4.2

XLI Field Mouse

XLI Data Logger

6.2

Warranty

5.3

4.3

Theory

XLI Controllers

5.4

4.4

Certification

XLI Survey Pack

5.5

4.5

XLI & GPS

4.6

GPS Recievers

4.7

DRM™

4.8

Laser Rangefinder

4.9

Pipe & Cable Locators

4.10

Line Illuminators

4.11

ACVG Coating Survey

4.12

CP & DCVG

4.13

Gas Detector

4.14

Sonar Equipment

4.15

Sewer & Drain Cameras

4.16

Accessories & Supplies

4.1

5.5.1 Field Technician 5.5.2 XLI Specialist

3

1.0

What Is Spectrum XLI? 1.1

President’s Message

1.2

The History

1.3

The Evolution

1.1 President’s Message Making pipelines safer.

We began the development of the Spectrum XLI system to address the shortcomings of legacy survey and inspection systems that existed at that time. We essentially wanted to make pipelines safer by developing better inspection equipment – and that is exactly what we did.

When it comes to mapping the location and performing above­ground inspections of buried pipelines, there is nothing Spectrum XLI cannot do better than any of the legacy technologies. Not only did we improve on every mapping and inspection technique we integrated, but we also designed the system so that they could all be conducted concurrently, mostly in one pass, resulting in the most efficient and complete inspection possible.

Not only is Spectrum XLI non-intrusive to the environment, but it has the greatest and most complete data compilation available.

We are very proud of our product and offer training on the theory, technology and operation of the Spectrum XLI system. We can’t wait to show you everything this system has to offer. Best of all, it’s extremely cost-­effective: combining surveys means fewer mobilizations and fewer crews to get the job done – and the analysis and reporting is both customized and automated so that your results are immediately available through the easiest­to­use software in the industry.

Can you really afford not to utilize the most user-friendly, comprehensive system available on your pipeline? Let us show you how Spectrum XLI is the solution you’re

What Is Spectrum XLI

looking for. Call today and get your inspections working for you.

6

Best Regards,

Shamus McDonnell President

What is Spectrum XLI

SPECTRUM XLI is the most comprehensive system for collecting GPS/GIS & utility integrity data.

7

8

What is Spectrum XLI

1.2 The History In the year

2000, we began the development the Spectrum XLI system. By 2003 we

had successfully developed and integrated a locating and GPS/ GIS mapping system that immediately surpassed everything else on the market. The original system also allowed SONAR to be connected to the system to allow dynamic pipe and cable mapping on fast moving rivers and deep water crossings.

We didn’t stop there; by 2004 we had an AC coating inspection system that was easier to use and more reliable than anything the industry had seen before.

In 2005 we added gas leak detection to the system, allowing a single survey to: locate, map, measure depth of cover, conduct leak detection and a coating survey at the same

time, in one pass over a pipeline. By 2008 we had successfully developed the world’s

most advanced and comprehensive cathodic protection inspection system, and by 2010 we integrated DCVG as well. Since then we have added inertial mapping for locations where GPS is not available, a laser range finder for mapping distant and non-accessible features, integrated photography and voice recording into our data collector, and made numerous other enhancements. Our work has resulted in nearly a dozen patents filed in numerous countries.

The development didn’t stop there. By 2014 we were able to add several new types of surveys, such as soil resistivity and environmental assessment. We have continued testing to develop new ways to take the XLI products to the next level with convenience,

What Is Spectrum XLI

capabilities, and safety.

9

1.3 The Evolution Note: Dates are approximate

1975 1910 Steel pipelines for oil and gas transportation become increasingly popular

What Is Spectrum XLI

1900

10

1978

Cathodic Protection Close Interval Potential Survey becomes commercial.

1930 Cathodic Protection applied to pipelines to reduce corrosion

DCVG is invented and becomes commercial as Mulvany Technique

1962 Gas Leak Detection Surveys become Commercial with Flame Ionization technique

1983 1967 1948 Hydro-testing becomes primary test method for inspection of pipelines

ACVG is invented and becomes commercial as Pearson Survey using 10,000Hz.

AC Current Attenuation technique becomes commercial as C-Scan Technique

1972 Inline Inspection with magnetic flux leakage becomes commercially available

2005 1st commercial Spectrum XLI System includes GPS, DOC, Water Depth, ACVG & ACCA

R&D on Spectrum XLI begins

1997

NACE publishes ECDA Recommended Practice RP0502-2002

2008 Spectrum XLI combines ALL above ground inspection techniques into ONE

CVG is updated with A-Frame technique using 4/8 H

In-line Inspection

2015

2002

Hydro-test

Spectrum XLI

Other

What Is Spectrum XLI

2000

Generation 2 Spectrum XLI System includes GPS, DOC, Water Depth, CP CIPS, DCVG, ACVG, ACCA, Gas Leak Detection, & MORE!

11

2.0

What Does It Do? 2.1

Field Solutions 2.1.1 Survey Options 2.1.2 Utility Locates

2.2

Software Solutions 2.2.1 Field Mouse 2.2.2 Falcon

2.3

Raw Log

2.4

Configurations

2.1 Field Solutions Inspections are all about the data. XLI not only gives you reams of continuous, and accurate data, but it helps you to interpret it. Have a challenging project? This is our specialty, and the data will prove it.

Is there potential to effectively build on your current inspections and get more for your manpower? XLI gives you options with equipment flexibility and extensive inspection capability.

An economic, efficient and reliable system that gives you the power of choice – and the data you need.

14

2.1.1 Survey Options Line Location & GPS/GIS Mapping GPS centerline survey - Latitude, Longitude, Elevation.

Scalable from sub-meter to sub-centimeter accuracy.

Right of way Inventory Indexed listing of test stations, pipeline marker signs, crossings, roads, water bodies, structures, etc. Optional laser rangefinder can tie-in facilities off the ROW.

Land Status Indexed list of: ROW Surface – Arable Crop, Pasture, Landscaped, Bush, etc.

Land Uses – Crop, Stock, Recreation, Unused, etc.

Accessibility – Easy to Impassable. Terrain – Flat, Slope, Undulating, etc.

Terrain – Flat, Slope, Undulating, etc.

Photographs Digital photographs are integrated into spatial data for report generation.

Depth of Cover Depth of cover corrected for diameter.

Depth of Water Sonar or otherwise measured for calculation of depth of cover under water.

Leak Detection Leak detection readings from leak surveys.

Coating Condition Overall condition of coating over longer lengths via AC Current Attenuation.

Specific coating fault indications via DCVG &/or ACVG.

Structure to soil potential measurements for assessment of CP systems.

Close Interval Survey (CIS) data correlation and analysis.

Pipeline Alias Universal indexing of pipeline features and anomalies.

What DoesIt Do

Cathodic Protection

15

2.1.2 Utility Locates Utility location is the process of identifying and labeling public utility mains which are underground. These mains may include lines for telephones, electricity distribution, natural gas, cable television, fiber optics, traffic lights, street lights, storm drains, water mains, and wastewater pipes. In some locations, major oil and gas pipelines, national defense communication lines, mass transit, rail and road tunnels also compete for space underground.

Location by these means is necessary because maps often lack the pinpoint precision needed to ensure proper clearance. In older cities, it is especially a problem since maps may be very inaccurate, or may be missing entirely.

“Call before you dig”, “Digger’s Hotline”, “One-call”, “Miss Utility”, or “Underground Service Alert” are services that allow construction workers to contact utility companies, who will then denote where underground utilities are located via color-coding those locations. As required by law and assigned by the U.S. Federal Communications Commission (FCC), the 8-1-1 telephone number will soon be used for this purpose across the United States.

Failure to call such a number ahead of time may result in a fine or even a criminal charge against the person or company, particularly if such negligence causes a major utility outage or serious accident, or an evacuation due to a gas leak. Hitting a water

What DoesIt Do

main may also trigger a boil-water advisory and local flooding.

16

Telephone, Cable TV, Communication, Alarm & Signal Lines

Oil & Gas Gathering, Transmission & Delivery Lines

Sanitary Sewers, Storm Sewers & Drain Lines

Potable Water Lines

Reclaimed Water, Irrigation & Slurry Lines

What DoesIt Do

know whats below, call before you dig

Electrical Power Lines, Cable Conduit & Lighting Cables.

17

2.2 Software Solutions 2.2.1 XLI Field Mouse XLI Mouse (Patented technology) is built for the Microsoft® Windows® Mobile 6.1™ operating system. Field Mouse displays and stores up to four NMEA compliant data streams simultaneously allowing GPS, line locator (DOC and Current Attenuation), sonar, AC and/or DC voltages and other information to be logged concurrently.

The software also stores each survey along with the pipeline parameters to allow easy retrieval and review of previously surveyed data. One unique feature is the equipment status form which allows the user to view the current status and data stream from each connected device.

The software can also be configured to give alarms for critical survey parameters. These include shallow cover being detected over-the-line being surveyed, as well as other anomaly indicators, and high error in the GPS calculated position. This helps to ensure that the survey technician is aware of anomalies on the line or in the data stream from the survey equipment.

System Requirements

Microsoft® Windows Mobile™ 6.1 software Intel® XScale™ PXA270 Processor at 624MHz

What DoesIt Do

VGA display with 640x480 resolution

18

16MB video memory 1 GB high speed Secure Digital Card

19

2.2.2 Falcon XLI software is an external line inspection data viewer for managing field data from multiple users.

XLI Falcon has powerful tools for sorting, layering, analyzing and reporting external line inspection logs, including sophisticated and flexible tools for identifying anomalous areas.

XLI Falcon can automatically import XLI Field Data, as well as other common survey data files that have GPS coordinates. Once imported, Falcon can immediately analyze and produce reports of the survey data.

The XLI software includes an Anomaly Matrix developed to numerically prioritize intervals of the line to identify high priority areas (i.e. Coating fault with insufficient CP, and shallow cover). This greatly simplifies the analysis and prioritization of the line with an easily customizable process.

Software Features: Automated importing and processing of XLI field data, as well as other common survey data files that have geodetic coordinates.

Data editing and alignment, Sort and filter both features and anomalies, Merging and layering

of separate surveys, Identify and numerically prioritize anomalies with user criteria,

Export electronic data

Generate comprehensive inspection reports. 

Maps, charts and photos, Final summary of survey and anomalies

System Requirements

What DoesIt Do

Processor: Pentium® Class - 1.6 GHz minimum, suggested 3 GHz or higher

20

RAM: 512 MB minimum, suggested 1 GB or more Operating System: Windows 2000 SP2 or XP minimum, suggested Windows XP SP2, Windows 7 SP1, or higher Available Bandwidth: 100 Kbps minimum, suggested 10 Mbps or more Required Software: Internet Explorer v5.0 (or higher)

XLI Inspection Technologies That Revolutionize Line Mapping Surveys Data Logger Windows™ Mobile 6 Software, VGA color touch screen, high speed SD storage card, Integrated Digital camera, Bluetooth™ and serial connectivity.

GPS & Laser Range Finder XLI Field systems can work with most NMEA 0183 compliant GPS and LRF devices, ranging from handheld units up to high accuracy survey grade systems. The standard GPS receiver for the XLI Field system is a real time differentially corrected system capable of sub-meter accuracy. GPS devices are connected directly to the XLI Data Logger or through the XLI Survey controller via RS 232 serial cable or Bluetooth™ .

Survey Controller A specialized device with integrated AC/DC RMS volt meter and serial RS 232 data hub for consolidation of line locator, GPS and Sonar or other NMEA 0183 compliant survey devices into single data stream for XLI data logger. Data logger connection to survey controller via serial (RS232) cable or wireless connectivity via integrated class 1.0 Bluetooth™ .

Line Illuminator Standard 150 Watt electro-magnetic XLI Line illuminator with remote status monitoring and modular power supply. Optional RIDGID SeekTech™ inductive 10 Watt and 5 Watt Line Illuminators are also available for the standard XLI Field system, or use XLI with other commercially available electromagnetic line locating systems.

Line Locator Standard to XLI is the RIDGID SeekTech™ SR20 or SR60 Line Locator with OmniDirectional antenna and mapping display. The SeekTech™ locators connect to the XLI Survey controller to allow automatic and continuous logging of depth of cover and current readings for centerline mapping and ACCA survey.

Specially built CP CIPS survey and troubleshooting equipment including the XLI Microscribe stationary data logging software that logs true DC or AC waveform logging for 24 hours or longer. Half-cells, probes, trailing wire and all your survey equipment needs are available.

What DoesIt Do

Cathodic Protection

21

2.3 Raw Log When an XLI survey is initiated the XLI Field Mouse software immediately begins recording every reading from all attached instruments to the SD card, and a continuous waveform from the XLI Controller integrated volt meters. This raw log can later be opened and evaluated in the XLI Falcon software, allowing the surveyors path (recorded by GPS), position over the pipeline (recorded from pipe locator) and all other sensor readings to be reviewed. Where erroneous or suspect readings are encountered, the raw log can be used to ascertain the source of the error, allowing reliable discrimination between instrument anomalies and survey anomalies.

The XLI Raw Log Records “One Call” locates, leak surveys & other GIS inspections step for step, including continuous line locator readings when using the RIDGID SeekTech™ SR20 or SR60 locators!

Industry’s only automatic verification system!

22

Required Equipment

Optional

GPS Receiver XLI Data Logger

Digital Camera XLI Controller Laser Range Finder SeekTech™ Locator & Transmitter

Required Equipment

Optional

GPS Receiver XLI Data Logger XLI Controller Sensit OMD

Digital Camera Laser Range Finder SeekTech™ Locator & Transmitter

Required Equipment

Optional

GPS Receiver XLI Data Logger XLI Controller SeekTech™ Locator & Transmitter XLI Line Illuminator XLI ACVG Cleats and/or Pins

Digital Camera Laser Range Finder

Required Equipment

Optional

GPS Receiver XLI Data Logger XLI Controller XLI Half-cell Probe XLI Trailing Wire Spool Pack XLI Trailing Wire

SeekTech™ Locator & Transmitter XLI Half-cell Probe Digital Camera Laser Range Finder

What DoesIt Do

CP CLOSE INTERVAL

COATING SURVEY

LEAK SURVEY

ROW MAPPING

2.4 Configurations

23

01

3.0

What Are Its Advantages?

3.1

Single GIS Data Collection

3.2

All in ONE

3.3

Intuitive Design

3.1 Single GIS Data Collection Because time is money and because people do make mistakes; The XLI Survey Controller was built to combine and record survey data directly and simultaneously from multiple electronic survey instruments to save data acquisition time and increase data accuracy and reliability.

Simple over-足the足-line surveys for the purpose of logging right-足of-足way inventory and geodetic coordinates can be completed with the XLI system using a single GPS connection directly to the XLI Data Logger. When advanced survey data is being acquired from numerous sources, however, the XLI Survey Controller eloquently simplifies the process. The Survey Controller gives the advantage with an integrated volt meter, power regulator, multiplexer and data controller with BluetoothTM or serial output to the data logger. All mapping and inspection modes use the same software and same easy user interface, with all the same data fields available for logging. The choice is one of purpose for the user.

The Advantages

DATA TYPE

26

XLI INPUT

GPS - Line Location

Serial

Photographs

Serial

Right-Of-Way Inventory

Manual

Land Status

Manual

Depth Of Cover

Serial

Depth Of Water

Serial

Coating Condition

Serial

Cathodic Protection

Serial

Leak Detection

Serial

Comments / Notes Soil Resistivity Environmental Assessments

Manual Serial Manual

Manual Input XLI Field Mouse allows all data to be recorded through user text input, or software indexed pick lists, with risk of error.

XLI SURVEY CONTROLLER Serial Input allows instrument readings to be electronically processed and logged, continuously, instantly and perfectly!

3.2 All in ONE ONE System more than TEN Surveys Uses include ILI Wall Loss, Cracks & Dents, USDA Soil Data Collection, Previous Repairs, Flow & Pressure Profiles, Internal Corrosion & Much More

Buy. Rent. Contract.

An affordable technology that increases your budget options.

Choose to employ the full system, or only the components you need & get the training you and your team need to use it.

27

3.3 Intuitive Design Spectrum XLI Field Mouse Real time Waveform of digital volt meter channel; selectable for the DC PSP, ACG or DCVG. Real time display of all connected devices: GPS, locator, gas detector, SONAR, Geonics Soil Conductivity, etc.

Warning and alarm thresholds are selectable to alert user of critical measurements.

Continuous Raw Log recorded includes voltage waveforms at 10-40Hz, continuous GPS position and satellite stats & user inputs.

All Data recorded to removable SD card to ensure data security and ease of access.

Integrated camera, voice note recorder and touch screen sketch creator, all tagged to GPS point!

6 Easy to use touch screen with QWERTY keyboard and simple software wizards to set

1

up surveys & inspections for data collection or staking out

4

The Advantages

locations.

28

3

2

5

Spectrum XLI G2 Controller Multiplexor for up to 3 external devices and up to 4 internally measured voltages Bluetooth wireless connectivity between controller and Field Mouse Software platform.

Military grade connectors and cables result in zero failures during extreme rigors of service.

Integrated filters for surveys in the most challenging environments.

Power distribution to peripheral devices.

Rugged, lightweight and low power design allows G2 Controller in pack with battery weight <10lbs (4.5Kg).

Spectrum XLI Falcon Software PC-based software to allow comprehensive combination, processing and analysis of inspection and survey data.

View GIS Mapping and over-line Inspection data combined.

Quick and easy sorting, spatial correction, analysis and prioritization of data with intuitive & easy to use wizard.

Easily import external GIS, ILI or other integrity data to integrate into view and analysis.

Customizable for units, display of charts, and organization of data on PC screen, with ability to save user profiles.

Displays raw GPS log and allows survey to be played back as animation over display.

Open and view raw logs to confirm quality and validity of inspection data.

Export data to display on Google Earth â&#x201E;˘ .

Export data to .csv file to allow import into MS Excel, GIS or other applications.

Print reports to PDF to allow easy sharing and viewing with universal Adobe Acrobat viewers.

The Advantages

XLI Anomaly Matrix prioritizes & ranks areas of concern to integrity based on user selectable parameters.

29

4.0

Products & Equipment 4.1

XLI Software Credits & Subscriptions

4.2

XLI Data Logger

4.3

XLI Controllers

4.4

XLI Survey Pack

4.5

XLI Field GPS

4.6

XLI & GPS

4.7

GPS Recievers

4.8

DRMâ&#x201E;˘

4.9

Laser Rangefinder

4.10 Pipe & Cable Locators 4.11 Line Illuminators 4.12 ACVG Coating Survey 4.13 CP & DCVG 4.14 Gas Detector 4.15 Sonar Equipment 4.16 Sewer & Drain Cameras 4.17 Accessories & Supplies

32

4.1 XLI Software Credits & Subscriptions

The Spectrum XLI Software – XLI Field Mouse – collects GIS and inspection data in a proprietary format that must be processed with the Spectrum XLI Falcon PC Software. The Spectrum XLI Falcon Software can automate your processing, analysis and reporting of GIS and inspection data, saving you time and money. With XLI Falcon you can view, process, analyze, print and export survey data files from as many PCs as you need. There are three ways to pay for the Field Mouse and Falcon software, Pay as you go with XLI credits using XLI Basic, unlimited GPS/GIS data with XLI Pro subscription or unlimited GPS/GIS & inspection data with XLI Enterprise subscription.

Use of Non-XLI Data in XLI Falcon Software Other popular data collection file formats can also be imported into the XLI Falcon software for processing. Data imported into the XLI Falcon software requires the use of XLI Credits to unlock data for advanced processing, analysis, report generation and data export in a universal format.

Pay As You Go

Subscribe

Using XLI Basic

XLI Pro or XLI Enterprise

Collect whatever data you want, when you want…

Collect whatever data you want, when you want…

Add credit and use it when you need it.

Add credit and use it when you need it.

Unlock and process all your data.

Analyze, report & export your data.

Unlock and process all your data.

Analyze, report & export your data.

Your credit never expires so there’s plenty of time to use it.

Your credit never expires so there’s plenty of time to use it.

No contracts and no subscriptions!

No contracts and no subscriptions!

Products & Equipment

Pay with XLI Credit or get even better rates with a subscription.

33

How XLI Credit Works Once you have purchased some XLI Credit you can start to use the advanced import and processing features that are only available with XLI Falcon. Simply sign in to your XLI Account and from there you can check your existing balance or buy more XLI Credit online through e-commerce using PayPal or over the phone using any accepted major credit card.

One XLI Credit will unlock 20meters of line with one or more survey points from Gen 1.x XLI Survey Controller or non-XLI data collectors; 2 credits are required for 20 meters of XLI Gen II Survey Controller data. The 20 meter length is measured downstream of the first point (one credit unlocks all the points in that length when there is more than one survey point per twenty meters in the data file). Where there are no points in a twenty meter length of line there are no credits required.

The three ways to pay for XLI Falcon software data processing features: XLI Basic - Pay-As-You-Go with XLI Credits, incurring no annual fee. With the use of XLI credits the XLI Basic option allows full use of all the Spectrum XLI Falcon Software functionality to process, analyze and export inspection data. Use XLI credits to unlock inspection data one time, after which you can share the XLI Falcon software and your survey data with as many users as you want.

XLI Pro allows GIS data (excludes inspection data) to be processed and exported from the Falcon software without XLI credit by simply registering your XLI Field Controller and Field Mouse Software. All the same features of XLI Basic are available with the use of XLI credits to unlock XLI inspection data for use in the Spectrum XLI Falcon Software.

Products & Equipment

XLI Enterprise allows unlimited GIS & inspection data to be processed and exported from

34

the Falcon software without XLI credit by simply registering your XLI Field Controller and Field Mouse Software.

XLI Software Pricing XLI credit and subscription prices are subject to change after 30 days of printed prices.

XLI Basic - Credits are available in denominations of 100, 1000, or 10,000. Denomination pricing is per transaction. XLI credit sales are final, & cannot be returned.

XLI credits do not expire.

100 credits $35 USD 1000 credits $333 USD 10,000 credits $3,000 USD Usage: Gen 1.5 x & non-XLI Data 1 credit / 20m of data ($15/Km) Gen 2 - 2 credits / 20m of data ($30/Km) Enterprise Subscription costs the same as ~128Km of data / controller.

XLI Pro Allows unlimited GPS/GIS mapping data to be processed, analyzed and exported for one annual price (requires XLI credit for inspection data).

$750 USD/year/XLI Controller.

XLI Enterprise - Allows unlimited GPS/GIS and Inspection data to be processed,

Gen 1.5 Unlimited data

One XLI Controller

One Year

Gen 2

Unlimited data One XLI Controller One Year

$4,500 USD

$2,650 USD

Products & Equipment

analyzed and exported for one annual price. Non XLI data still requires credits.

35

4.2 XLI Data Logger QWERTY Keyboard

# 20120

Portable and rugged. Windows Mobile 6.5 Professional, VGA color touch screen, high speed SD storage card, integrated 3 MP digital camera, Bluetooth connectivity all contained in a weather-proof case.

OMNII RT15 ™

Platform Processor: Texas Instruments® OMAP 3 Processor 800MHz Memory: 256MB RAM, 1GB Flash ROM

Operating System Microsoft® Windows Embedded Handheld 6.5

Wireless Communication 802.11a/b/g/n radio Bluetooth® v2.0 + EDR

Camera Color 3 Megapixel with auto-focus and 4x digital zoom

User Interface 3.7” VGA Display

External Connectors USB On-the-Go (OTG) Functionality DC Jack

Power Management 5000 mAh high capacity Lithium Ion smart battery

Products & Equipment

User Environment

36

Operating Temperature: -4F to +122F (-20C to +50C) Storage Temperature: -40F to +140F (-40C to +60C) 5% to 95% RH non-condensing Rain & Dust Protection: IP65 Drop: Withstands multiple drops from 6 ft. (1.8 m) Shock and Vibe: 5-400Hz PSD (random) and 30g (3 axis) ESD: +/- 8kVdc air discharge, +/- 4kVdc contacts

Regulatory Approvals CSA, CE, FCC, ETSIWEEE

Physical Dimensions 222 mm x 100 mm x 45 mm (8.74” x 3.94” x 1.77”) 610 grams (1.3 lbs) with battery pack

37

Products & Equipment

4.3 XLI Field Survey Controllers # 21101

Gen 1.5 Single channel AC/DC RMS volt meter

# 21111

Gen 2 Dual channel AC/DC RMS volt meter

The XLI Survey controller was designed to bring several technologies like GPS, voltages, line location, depth of cover and water depths, together into one data stream.

With patent-pending technologies for data management, power management / distribution for peripheral devices and built-in support for class 1.0 Bluetooth, the Survey Controller is dear to the heart of the XLI field system.

Input Signals 3 Channels of NMEA or ASCII Compliant device data streams at 2400-115,200 baud and analog voltage sampling.

Output Voltage 12VDC on connector pins for GPS, Sonar and Locator.

Input Power Voltage Range 10.0 to 14 VDC with reverse polarity and over voltage protection.

Low Voltage cut off at 9.8 Volts, reset above 10.7 volts.

Power Consumption <1.0 W

Current Consumption <100 mA @ 12 VDC

Enclosure Aluminum

Display 6 indicator LEDs for Power, Bluetooth, Transmit / Receive for Port 1, 2, & 3

Physical Dimensions

Operating Temperature

Products & Equipment

-40°C to +70°C (-20°C for Bluetooth)

38

30mm x 105mm x 130mm (1.25” x 5.00” x 4.00”)

Storage Temperature -40°C to +85°C

Humidity 95% non-condensing

Communications RS232 & Bluetooth (operates in the unlicensed ISM band at 2.4 to 2.485 GHz)

0.35 kg (0.77 lb) with cables

VOLTAGE MEASUREMENTS DC Voltage Specs Input Impedance

10 MΩ

Range

+/- 9.5 Volts

Analog Noise

200 nanoVolts - AC rejection >100db.

Effective Resolution

4 decimals at 24.0 bits with Reading taken 880 times/second

Accuracy

0.03% of DC range (+/-1 mV @ 9.58 Volts)

Input Impedance

10 MΩ (scalable external option for 100+ MΩ)

Range

+/- 1 Volt

Accuracy

+/- 1%

Products & Equipment

AC Voltage Via AC to DC RMS Converter

39

4.4 XLI Field Survey Pack # 22100

With standard accessories

The XLI Field Survey Pack was custom designed for ergonomics and function during line mapping and inspection surveys. Adjustable GPS antenna pole, equipment tethers, specialty attachments and wiring integration make this pack the first true ECDA survey pack in the industry. Fully adjustable harness ensures a comfortable and reliable fit.

Standard Accessories Included with XLI Survey Pack Water bottle holster.

Side pocket for accessories, tools, and batteries.

Leatherman Wave multi tool.

Radio holster for hand held 2 way radio.

Optional Accessories for the XLI Survey Pack 4 liter pocket â&#x20AC;&#x201C; for extra gear or first aid kit.

CP Trailing wire spooler.

Holster for spare CP Wire spool.

Line Locator Tether.

Sensit PMD gas detector carrier.

Products & Equipment

Survey lathe and tool carrier.

40

41

Products & Equipment

4.5 XLI & GPS Sub-meter distances are required for CIS surveys and coating attenuation calculations; therefore real time differential GPS systems are required for CIS and coating condition surveys.

While the XLI system can be custom configured to work with most popular GPS receivers on the market, ease of use has made the Hemisphere Crescent Differential GPS® receivers the default receiver of choice for the XLI system.

XLI COMPATIBLE GPS DEVICES: Any NMEA 0183 compliant GPS Receiver with minimum 1 Hz GGA output on a RS 232 port at a baud rate of 4800.

The XLI Field System works with any GPS receiver that can have the data output configured to deliver the needed NMEA 0183 sentences via a RS232 (DB9 connector / serial port) or Bluetooth™ .

XLI Field-tested Compatible GPS units:

Products & Equipment

Hemisphere GPS® Crescent A100, A200 & R100 Series, CSI Wireless DGPS Max, Garmin® eTrex , Topcon® HiPer® +, Trimble® Pathfinder™ ProXRS and ProXR, Trimble® Site Surveyor 5800

42

No guarantee of GPS accuracy or performance is implied.

4.6 GPS Receivers The Hemisphere GPS® Crescent® R100 & R200 Series of Differential Correction Capable GPS Receivers offer a high-accuracy GPS solution for XLI surveys.

Using Space Based Augmentation Systems (SBAS), WAAS / EGNOS, or the worldwide OmniSTAR service (R120 & R220 Only), the Crescent GPS receivers are capable of horizontal accuracies better than <0.6m (<2’) at 95% confidence* in single frequency, and <0.1m (<4”) dual frequency (R200 series).

When using differential correction services these units provide sub-meter position updates at up to 20 times per second (20 Hz). The Hemisphere receivers also feature advanced COAST™ technology that enables them to use differential correction data during temporary corrections signal outages for half an hour or longer without significant degradation of accuracy.

# 23105

A101

Mechanical dimensions 4.1”H x 5.7”D Weight : 20 Ounces Temperature Range: -40° to +85° C Power: <3 watts

GPS Sensor Specifications (Single Frequency)

Channels Differential Options Update Rate Horizontal Accuracy

L1, C/A code, with carrier phase smoothing (patented COAST™ technology during differential signal outage) 12-channel, parallel tracking (10-channel when tracking SBAS) SBAS (WAAS, EGNOS, MSAS), e-Dif, L-Dif Up to 20 Hz position < 0.6m (< 2’) 95% confidence (DGPS) < 2.5m (< 8’) 95% confidence (autonomous)* * Dependent upon ionospheric activity and multipath

Products & Equipment

Receiver Type

43

# 23110

S320

GNSS Survey Receiver Specifications (Dual Frequency)

Receiver Type Channels Position Modes

Dual frequency GNSS All in view, L1CA GPS, L1P GPS, L2P GPS, L2C GPS, L1 GLONASS, L2 GLONASS, 3 SBAS or 3 additional L1CA GPS, 1 L-band

Update Rate

RTK, ROX, SBAS, External RTCM, Autonomous, L-band DGPS service, L-band high precision services, L-band high precision service with GLONASS

RTK Formats

CMR, CMR+1, RTCM3

Update rate/recording Cold Start Rate

Selectable from 1, 2, 4, 5, 10 Hz (20 Hz available) < 60 s typical (no almanac or RTC)

Horizontal accuracy specifications

RTK

2,3

L-band high precision services

Environmental specifications

RMS (67%)

2DRMS (95%)

10 mm + 1 ppm

20 mm + 2 ppm

0.1 m

0.2 m

2,4

SBAS (WAAS)

0.3 m

0.6 m

Autonomous, no SA

1.2 m

2.5 m

2

Humidity: Up to 100% condensing Enclosure: IP67 Shock: EP455, 2 m (6.56 ft) pole drop Power specifications

Bluetooth: Dual port

Battery: 2 x lithium ion, 2.6 Ah each, 5.2 Ah total, 7.2 V

1 x GSM/GPRS, 1 x SS (900 MHz or UHF

Products & Equipment

Storage temperature: -40°C to +85°C (-40°F to +185°F)

Communications Specifications

Radio GSM options: Integrated

44

Operating temperature: -30°C to +65°C (-22°F to +149°F)

range: 400 MHz), CDMA capable Baud rates: 4800 - 115200 Serial ports: 1 x RS-232 (9-pin circular, multi

External voltage: 9 to 20 VDC Internal radio power: 1 Watt Mechanical specifications

use) 1 x RS-232 (9-pin DSUB)

Dimensions: 114 H x 197 D mm (4.49 H x 7.76 D in)

Power port: 1 x Power input (2-pin circular)

Weight: 1.51 kg (3.33 lb)

USB:1 USB Host 1 USB Device (9-pin circular)

Material: Plastic

# 23120

R330

The R330™ GNSS receiver is a full solution product in a small box. The R330 utilizes Hemisphere GNSS’ Eclipse™ platform, and our latest GNSS patented technology. The R330 provides accurate positioning using several differential correction methods such as RTK, L-band DGNSS (VBS/HP/XP/G2) and Beacon.

GNSS Sensor Specifications

Communications Specifications

Receiver Type: GNSS L1 & L2, RTK with carrier phase

Communications Serial Ports: 2 full-duplex RS232

Signals Received: GPS, GLONASS and BeiDou 4 Channels: 270

Baud Rates: 4800 - 115200

SBAS Tracking: 3-channel, parallel tracking

Correction I/O Protocol: Hemisphere GPS proprietary, RTCM v2.3 (DGPS), RTK v3, CMR, CMR+1

Update Rate: 10 Hz standard, 20 Hz optional Accuracy: 20 ns Cold Start Time: < 60s typical (no almanac or RTC) Warm Start Time: < 30s typical (almanac & RTC) Hot Start Time: < 10s typical (almanac, RTC & position)

Data I/O Protocol: NMEA 0183, Hemisphere GPS binary Timing Output: 1 PPS (CMOS, active high, rising edge sync, 10 kΩ, 10 pF load)

Maximum Speed: 1,850 kph (999 kts)

Event Marker Input: CMOS, active low, falling edge sync, 10 kΩ

Maximum Altitude: 18,288 m (60,000 ft)

USB Ports: 1 USB Host, 1 USB Device

Differential Options: SBAS, Autonomous, External

Environmental specifications

Mechanical specifications

Operating Temperature: -40°C to +70°C (-40°F to +158°F)

Dimensions: 17.8 x 12.0 x 4.6 (cm) 7.0 L x 4.7 W x 1.8 H (in)

Storage Temperature: -40°C to +85°C

Weight: 645 g (1.42 lbs)

(-40°F to +185°F) Shock and Vibration: Mechanical Shock: EP455 Section 5.14.1 Operational Vibration: EP455 Section 5.15.1

Products & Equipment

RTCM, RTK, L-band (VBS/HP/XP/G2)3

45

4.7 DRM™ - Dead Reckoning Module # 50180

XLI Field DRM®

Specifications

Horizontal Position Accuracy

1% to 2% of distance traveled from last fix

Compass Azimuth Accuracy

1° RMS, 0.1° resolution

Vertical Position Accuracy Mechanical Dimensions Weight Temperature Range Power

1.5 meters RMS 3.4” x 2” x 0.6” 1.5 Ounces* -40° to +85° C <1 watt

The XLI DRM® allows the surveyor to continue collecting spatial data when GPS is temporarily unavailable. The DRM is an inertial mapping unit capable of sub meter accuracy for up to 45 minutes without GPS correction (ideal conditions).

The Dead Reckoning Module (DRM®) is a miniature, self-contained, electronic navigation unit that provides the user’s position relative to an initialization point. Dead reckoning (DR) and GPS data are blended by an internal Kalman filter. When GPS is

Products & Equipment

available, the DR functions are automatically calibrated continuously. When GPS is

46

unavailable, dead reckoning takes over. Unlike strapdown inertial systems, the DRM® error characteristics are independent of time, and depend primarily on distance traveled. Advanced motion classification algorithms or SmartPedometry™ analyze movement and compensate when the user is moving backwards, sideways, running, crawling, or just “fidgeting” in place. An automatic compass orientation algorithm provides accurate azimuth information when the user is upright or prone. MEMS gyros compensate for transient magnetic disturbances. A barometric altimeter provides vertical position accurate enough to identify the floor of a building.

4.8 XLI Laser Rangefinder Allows collection of geodetic coordinates without having to occupy the location with GPS receiver. This allows accurate and efficient XLI survey of distant features (buildings, etc.) or locations where GPS blockages exist (i.e. under tree canopy or near buildings) and during other times of GPS outage. This compact and lightweight laser provides “thru-the-lens” viewing, eliminating parallax issues so you know the laser energy is traveling directly along your line of sight. Offering crystal clear optics with the data shown in a heads up display so you don’t have to take your eye off the target. Utilizing the integrated tilt sensor, you can measure horizontal or vertical distance and instantly calculate the height of any object with the built-in height routine! Data communication is via a wired RS232 serial (360 standard), or Optional Bluetooth (360B) wireless connection to the XLI data logger TruePulse 360B – Bluetooth Laser Rangefinder

# 23140

TruePulse 360Laser Rangefinder

Specifications

Measurement Range:

Dimensions: 5” x 2” x 3.5” (12 cm x 5 cm x 9 cm)

Distance: 0 to 3280 ft (1000 m) typical, 6560 ft (2000 m) max to reflective target

Weight: 8 ounces (220 g)

Inclination: +/- 90 degrees

Power: 3.0 volts DC nominal; (2) AA or (1) CRV3

Azimuth: 0 - 359.9 degrees

Eye Safety: FDA Class 1 (CFR 21) Environmental: Water & Dust Resistant, NEMA 3, IP 54 Temperature: -4°F to +140°F (-20°C to +60°C) Optics: 7X Magnification (Field-of-view: 330 ft @ 1000yds)

Accuracy: Distance: +/- 1 ft (+/- 30 cm) in precision mode +/- 1 yd (+/-1m) in non-precision mode Inclination: +/- 0.25 degrees Azimuth: +/- 1 Degree; Typical

Display: In-scope LCD

Operating Modes: Horizontal Distance, Vertical Distance, Slope Distance and Inclination

Units: Feet, Yards, Meters, Degrees and Percent Slope

3-point flexible height routine with auto sequencing Advanced target acquisition: Closest, Farthest, Continuous and Filter (reflector only)

Products & Equipment

# 23150

47

4.9 Pipe & Cable Locators # 25100

SeekTech™ SR-20 Locator XLI Kit

The RIDGID SeekTech™ locators utilize OmniSeek™ technology: a combination of multi-directional antennas and frequencies, a revolutionary mapping display and state-of-theart processing to provide more information to efficiently locate underground utilities.

Easy-to-read mapping display that shows: Real time line, direction and depth Directional changes as they occur Shows directional arrows that guide the user to the target line Signal strength readings to confirm the locate of the target line Proximity number reading that increases as distance to the target decreases Specifications Active Line Trace Frequencies

128Hz, 1kHz, 8kHz, 33kHz

Sonde Frequencies

16Hz, 512Hz, 33kHz

Passive Power Trace

50Hz, 60Hz

Passive Radio Trace

<4kHz, 4kHz-15kHz, 15kHz38kHz

Weight Power Source

3.9 lbs.

4 C-Size Batteries

Features

Products & Equipment

Proximity Signal - Minimizes depth over target and maximizes relative signal strength to guide you closer to the target independent of the current flow

48

Mapping Display - Virtually maps the utility to help guide you down the line.

Shows signal distortion and line turns in real time Guidance Arrows - Guides the operator to target line by minimizing signal gradient Current - Identifies current on target line for faster diagnosis of complex locates Signal Strength - Allows the operator to maximize signal strength over the target Continual Depth - Shows depth changes in real time

# 25110

SeekTech™ SR-60 Locator

SeekTech™ Receivers with their large display give you the information you need when you need it to locate more with greater certainty.

The RIDGID® SeekTech™ SR-60 utility locator is the only utility locator with the capability to receive the full range of locatable frequencies; allowing it to be used with any pre-set frequency transmitter. The SR60 has all the same features as the SR20, plus a larger LCD display.

With the SR-60, users can locate at the broad frequency range of 10 Hz to 490 kHz, and can tune the frequency 1 Hz at a time, allowing the SR-60 to be used with any pre-set frequency transmitter. The unique passive search mode can be used to search all broadband passive frequencies at once, allowing for easy identification of unknown metallic lines in the target area. These features provide the necessary data for the professional locator to develop a comprehensive and accurate understanding of the underground infrastructure.

The SR-60 is for users wanting the fastest, easiest, most versatile receiver available. Choose the SR-60 for fast confident locates even under tough locate conditions (poor conductors, poor soil conditions, poor grounding, etc.)

Can trace any frequency from 10 Hz to 490,000 Hz. Features

Can trace energized lines and sondes (beacons) simultaneously Has all the ease of use and accuracy of the SR-20 but with ALL locatable frequencies.

# 25037

SeekTech™ SR-60 Tilt Sensor Kit

# 25032

Bluetooth Cable Replacement for SeekTech Locator

The XLI Bluetooth cable replacement for Seektech SR-20 and SR-60 locators uses internal power at the controller and 2 AA batteries in the transmitter for the locator.

Products & Equipment

Tilt sensor for the SR60; allows the true spatial coordinate for the line to be correctly calculated when surveying slopes or offsets!

ALTERNATE RECEIVERS FOR XLI: Radiodetection RD400PXL-2, RD4000 RD8000 & PCM+(Bluetooth)Vivax

49

# 25140

SeekTech™ ST-33Q 5-10 Watt

Revolutionary New Locator making the toughest locates easy.

Distance: Induce over 8 times more current than the competition onto a target line. More current means that you can walk and trace further than ever before. Locate lines deeper then any other inductive transmitter.

Versatility: Induces at 8 kHz and 33 kHz for low distortion locates. In direct connect mode, the SeekTech™ ST-33Q can transmit at any frequency between 10 Hz and 490,000 Hz making the RIDGID SeekTech™ ST-33Q one transmitter that can be used with all receivers.

Speed: More signal equals less retracing of your steps to pick up and move the transmitter. Cut your inductive trace steps in half, by only having to set up the ST-33Q once. In direct connect mode, the LCD display gives instant feedback on current flow and line resistance Accuracy: Induce more current at lower frequencies. Lower frequencies are less prone to jump onto other lines in congested areas reducing distortion and increasing accuracy.

Confidence: More current on your line means more signal to locate. Combine your experience with the information provided by RIDGID Locators and you have the tools that allow you to work through difficult traces with confidence. .

Specifications

Products & Equipment

Output Frequencies:

50

Direct Connect (Factory Set): 128 Hz, 1kHz, 8kHz, 33kHz, 93kHz

Direct Connect (User Defined): Any Frequency 10 Hz - 490kHz

Induction: 8kHz, 33kHz

Power Source: 6 Alkaline or rechargeable batteries (D-Cells) or 12V external power supply Power Settings: 5 mA to 400 mA on internal batteries; High Power option to 1000 mA on external power Weight: 12.15 lb. (5.5 kg) w/batteries

4.10 Line Illuminators # 25120

Frequencies Output Power

Frequencies

1kHz, 8kHz, 33kHz

Output Power

5 Watts, Nominal

Output

Any 2 Frequencies

Weight

2.4 lbs.

Maximum Open Circuit Voltage

240VAC 50/60Hz

Power Source

6-C Size Batteries

ST-510 10 Watt Line Illuminator

128Hz, 1kHz, 8kHz, 33kHz 10 Watt, Variable

Display

LCD

Weight

8.9 lbs.

Maximum Open Circuit Voltage

240VAC 50/60Hz

Power Source

8-D Size Batteries or 12V external

# 25140

ST-305 5 Watt Line Illuminator

Frequencies

128 Hz, 1kHz, 8kHz, 33kHz, User Defined - Any Frequency 10 Hz ~ 490kHz

Weight

12.15 lb. (5.5 Kg) w/batteries

Power Source

6 D size or 12V external

Power Settings

5 mA to 400 mA on internal batteries;

High Power option to 1000 mA on external

Products & Equipment

# 25130

ST-305 5 Watt Line Illuminator

51

Power Supply for Line Illuminator

# 26120

Field Power Standard

Products & Equipment

Integrated LCD for confirming battery charge status Overnight charging (8hrs)

52

33 Ah valve-regulated “non-spillable” batteries for transportation as per US DOT, ICAO, IATA and IMDG. (MSDS’ available upon request.)

Per unit weight within OH&S tolerances (32lbs) 24 volt capable with two Bluejuice boxes and a crossover cable

# 26130

Field Power Plus

Further to the foundational priorities of Field Power, the Plus box was built to include 2-way communications for remotely monitoring and controlling the XLI Line Illuminator.

10 Amp/Hr AC charger / Power supply capable of running XLI Line Illuminator from 110Volt AC 60Hz or 50Hz. Integrated Motorola CM200 radio works with HT1250 portable radio for voice and DTMF transmission for remote status and control changes to the XLI Line Illuminator.

Products & Equipment

Integrated 2-way communications for XLI transmitter operations or technicians

53

4.11 ACVG Coating Survey XLI Field Electromagnetic Line Illuminator Up to 20 miles of line can be illuminated with the standard 150 Watt electromagnetic XLI Line Illuminator with remote status monitoring and modular field power supply. The XLI Line Illuminator was designed to provide a stable current to the line being surveyed to make AC Attenuation and AC Voltage Gradient Surveys more accurate and more reliable. The XLI Line Illuminator system includes the XLI Line Illuminator and the Field Power Plus 12 Volt power supply with integrated communication system to remotely check and change the status of the line Illuminator from up to 10 miles away. Other applications include leakage monitoring of methane piping systems in offshore gas platforms, industrial and petrochemical facilities.

A

# 26100

Audio Alert

Voice synthesizer to produce vocal status messages both through a built-in speaker & through the Field Power Plus radio

Enclosure

Pelican™ Protector Case™ Ultra High Impact structural copolymer.

Display

Physical Dimensions

XLI 150 Watt Line Illuminator

LCD, with TX Status signal on Electromagnetic frequency.

Power Input

External 12 Volt DC, 0.5 Ah min., Rec. min. 7.5 Ah battery – input connector is military-style

Power Output

0.25 to 3.00 Amp. at up to 50 volts. 4 Way post or military Connectors for output leads.

339.7 mm x 295.3 mm x 152.4 mm 4.54 Kg (10.0 lbs.)

Products & Equipment

Frequency

54

B

AC 100 Hz, 1KHz, 10KHz, 512 Hz Preset Frequencies

Integrated LCD for confirming battery charge status # 26120

XLI Field Power Standard

Overnight charging (8hrs) 33 Ah valve-regulated “non-spillable” batteries for transportation as per US DOT, ICAO, IATA and IMDG. (MSDS’ available upon request.)

Per unit weight within OH&S tolerances (32lbs) 24 volt capable with two Bluejuice boxes and a crossover cable

C

A C1

C2

B

C3

# 26130

XLI Field Power Plus

c1

The Motorola CM200 mobile features 4 Channels 14-Character Alphanumeric Display

Further to the foundational priorities of Field Power, the Plus box was built to Include 2-way communications for remotely monitoring and controlling the XLI Line Illuminator.

Battery Gauge 6 Programmable Buttons Adjustable Power Levels 1-Character Numeric Display 4-Watt Front-Projecting Speaker

Integrated 2-way communications for XLI transmitter operations or technicians 10 Amp/Hr AC charger / Power supply capable of running XLI Line Illuminator from 110Volt AC 60Hz or 50Hz. Integrated Motorola CM200 radio works with HT1250 portable radio for voice and Dâ&#x201E;˘ F transmission for remote status

and control changes to the XLI Line Illuminator.

2 Programmable Buttons

c2

The Motorola HT1250 portable features 128 Channels (8 Zones)

c3

Field Power Plus Antenna Collapsible from 12 ft to a 6 foot portable container, the Field Power Plus antenna is designed to extend the range of the 2-way remote control radios to as much as 20 km. A must for those long survey days.

Products & Equipment

c

55

C1

Products & Equipment

C2

56

C1

The Motorola CM200 mobile features: 4 Channels, 14-Character Alphanumeric Display, Battery Gauge, 6 Programmable Buttons, Adjustable Power Levels, 1-Character Numeric Display, 4-Watt Front-Projecting Speaker, 2 Programmable Buttons

C2

The Motorola HT1250 portable features: 128 Channels (8 Zones)

C3

Field Power Plus Antenna: Collapsible from 12 ft to a 6 foot portable container, the Field Power Plus antenna is designed to extend the range of the 2-way remote control radios to as much as 20 km. A must for those long survey days.

# 26150

XLI ACVG Survey Cleats

Constructed from titanium with extra strength stainless steel coated cables, the XLI survey cleats are intended for any outdoor environment and will ensure maximum contact with the ground.

# 26160

XLI ACVG Survey Probes

Durable steel construction ensures that the XLI ACVG survey probes work in any outdoor environment and will make maximum contact with the ground. 1 meter (39”) Long.

XLI ACVG Low Frequency AC Filter

Removes 50/60Hz and harmonics which otherwise can create “noise” or interference during the ACVG coating survey.

Operates on one alkaline 9V battery.

Products & Equipment

Products & Equipment

# 26170

57

4.12 CP & DCVG CP Half-Cells & Supplies Spectrum XLI has everything needed for Cathodic Protection and DCVG surveys. The XLI CP survey kit includes the Spectrum XLI wire spool and half-cell probe. Spectrum XLI also supplies trailing wire, halfcells, and copper sulfate to provide you with everything you need for your next CP survey.

# 30100

# 30110

XLI 3A (3”) Half-Cell Electrode

XLI 1¼” x 6” Half-Cell Electrode

# 30120

# 30150

XLI Pencil Probe Half-Cell

XLI Wood Half-Cell Tip

Products & Equipment

# 30140

58

XLI Half-cell re-build/repair kit

Includes Copper Sulfate crystals, distilled water, 2 tips, 4 O-rings, and cleaning supplies in one convenient package

# 28003

CP Close Interval Survey Trailing Wire

Standard 34 gauge, also available in other gauges by special order. Each spool contains more than 3,000 meters of wire. Spools can be refilled with wire, so return your empty spools to Spectrum XLI for refund or discount on refills.

# 28160

CP Close Interval Survey Trailing Wire Spool Holder

CP Half-Cell Probes

A B C

F

# 27100

Standard Half-cell Probe - no trigger

# 27100

Standard Half-cell Probe - w/ 9V trigger

# 27100

Standard Half-cell Probe - w/ DCVG switch

# 27100

Break-Apart Half-cell Probe - no trigger

# 27100

Break-Apart Half-cell Probe - w/ 9V trigger

# 27100

Break-Apart Half-cell Probe - w/ DCVG switch

E D

Products & Equipment

The XLI half-cell probes can be used for CP CIPS, AC PSP, DCVG or ACVG surveys. Solid metal construction with durable powder coat finish and rugged yet simple banana plug connectors make these probes the most versatile and reliable on the market. The first probe to allow any common half-cell to be simply threaded into the probe; allows quick change of damaged or contaminated half-cells. Your choice of either solid one piece design or convenient threaded joint to allow probes to be split for compact storage and transportation.

Three probe versions to choose from, standard probe with no trigger, XLI 9 volt trigger probe, or hybrid CP CIPS and DCVG switching probe for XLI Gen 1 or 1.5 controllers.

59

#25044

XLI Bluetooth Survey Point Trigger

Remote trigger for saving survey points Replaces 9V half-cell probe trigger or direct trigger on touch screen or PSION device.

# 28170

XLI CP CIS Filter (filter AC from DC potential)

Removes AC at 50/60Hz and harmonics which otherwise can create â&#x20AC;&#x153;noiseâ&#x20AC;? or interference during the DC Pipe to soil or voltage gradient coating survey. Operates on one alkaline 9V battery.

# 28180

XLI Voltage Divider

For DC pipe to Soil survey, reduces voltage range by a scale of 10; allows maximum measured voltage to be increased by 10 times.

Products & Equipment

# 28200

60

XLI Controller Voltage Tester

The XLI controller voltage tester was specially built to simulate real field survey potentials to verify correct operation of survey equipment.

The XLI controller voltage tester creates DC interruption cycles with and without AC interference, and 1KHz AC. Test modes include AC & DC test potentials, DC test potentials on an interruption cycle, and DC interruption cycle with AC interference.

Spectrum XLI Microscribe #51020

XLI Microscribe Data Logger Software

Facilitates CIS survey and trouble-shooting functions, the XLI Microscribe software logs true waveforms for 24 hours or longer. The survey log can be viewed in its entirety or parsed using XLI Office Software to produce interrupted CIS on /off (polarized) values for any interruption cycle being used, or AC PSP log waveform analysis for AC interference and AC corrosion studies.

#51030

XLI Microscribe PC Viewer Software

Products & Equipment

Facilitates CIS survey and troubleshooting functions. The software allows viewing, editing and parsing of the true waveforms logged by XLI Microscribe.

The Microscribe survey log can be viewed in its entirety or parsed to produce interrupted CIS on / off (polarized) values for any interruption cycle being used.

61

4.13 Gas Detector # 24110

Portable Methane Detector

SENSIT Technologies Portable Methane Detector (PMD) Through the use of Filtered Infrared Spectroscopy technology, the handheld PMD device offers sensitivity and cost advantages over conventional techniques employing flame ionization detectors. The technology improves the efficiency of mobile or walking leak surveys, is less costly to maintain than other technologies, and can detect leaks from low ppm to 100% methane gas; filtering out other gases at PPM range.

The handheld device supports natural gas infrastructure leak surveys using a novel infrared (IR) detection technology and leak pinpointing capability for greater user flexibility and safety.

The PMD may be used for walking and vehicle based gas leak surveys for natural gas systems.

Other applications include leakage monitoring of methane piping systems in offshore gas platforms, industrial and petrochemical facilities.

Operational Specifications

Pump Rate Response Time Detection Range

Intrinsic Safety Temperature Power

Products & Equipment

Battery Life

62

1.5 Lpm <2 Seconds 0-10,000ppm 0-100% LEL 5-100% volume Pending US and ATEX zone 2 -20 to +40°C (0° to 130°F) NiMH Rechargeable battery Pack 8 hrs / battery pack

Physical Specifications 25.4cm x 10.4cm x 14cm (10” x 4.1” x 5.5”) 2.6Kg (6.1 pounds) IP54 environmental resistance

The Spectrum XLI PMD Kit comes with carry case to attach the PMD to the Spectrum XLI survey pack & Bluetooth adapter.

Spectrum XLI also carries the hardware to connect the Sensit LMD to the Spectrum XLI controller.

63

64

4.14 Sonar Equipment

# 27100

GARMIN 300C

The Garmin 300C features high-performance sonar and high-resolution screen. Its single or dual-frequency sonar is dependable and intuitive to use. The 300C features a streamlined design with enhanced user interface and UltraScrollâ&#x201E;˘ technology for super-fast screen updates.

SeeThruâ&#x201E;˘ technology separates fish from thermoclines and structure. AutoGain technology to enhance target visibility and temperature log graphically records water temperature.

Suitable for both freshwater and saltwater.

320 x 240 pixel, ultra-bright QVGA color display

Alternate XLI Water Depth Devices* Any NMEA 0183 compliant sounder or SONAR device *Must be compliant with XLI Survey Controller Parameters, check with XLI Tech Support for details.

Products & Equipment

1200 watts peak-to-peak power for depths up to 900 feet 80/200 kHz dual beam transducer operation

65

4.15 Sewer & Drain Cameras SeeSnake® Drain & Sewer Inspection Equipment Expands Service Capabilities and Profitability

Owning a RIDGID® SeeSnake system expands your service capabilities and gives you the confidence and credibility you need to win more work. In fact, more than 95% of SeeSnake System owners report increasing their sales and profits after purchasing a RIDGID SeeSnake system.

The entire RIDGID SeeSnake line of pipe inspection equipment is built to endure the toughest residential, commercial and industrial environments. In the rare case that your system needs service, our nationwide network of SeeSnake certified service centers get you back up and running quickly.

RIDGID SeeSnake video inspection systems offer unmatched reliability and performance in a ruggedized package. Each system offers: 100% hardened stainless steel camera head spring assembly of optimum durability.

Rugged, high-intensity lights for exceptional viewing and long life.

Flexible transmitters make locating easy and are compatible with RIDGID locators.

Products & Equipment

Can be used with any SeeSnake monitor or recorder.

66

# 31100

Mini-SeeSnake

11⁄2” to 6” Lines up to 200’ Ideal for where portability & maneuverability are crucial: multi-story buildings, roof-tops, confined areas, etc.

# 31110

SeeSnake

2” to 12” Lines up to 325’ Wide pipe diameter capacity range makes this system ideal for a wide range of inspection needs.

# 31120

SeeSnake Plus

Same features and specifications as the SeeSnake Plus; Includes an always upright, self-leveling camera design.

Monitor and Record: Use the power of your laptop to control your inspection camera, using the laptop as a large screen monitoring display & to record videos and image directly to your hard drive.

Camera Head Scratch-resistant, debris-shedding sapphire crystal lens.

100% stainless steel housing.

High power adjustable LEDs behind a thick polymer plastic window.

410,000 CCD pixel resolution.

Small camera diameter size (22 mm – 35 mm).

Pipe view (wide angle) technology to see the pipe wall.

Self-leveling option.

Tested water tight to 330’ in length.

Push Cable Fiberglass inner core.

Polypropylene jacket.

Integrated push cable with power/video signal.

512Hz FleXmitter® transmitter included with all systems Monitors & Recorders RIDGID SeeSnake monitors are available in various styles to meet your needs and are designed to be rugged, portable, and durable. A new line of monitors use the RIDGID 18V Lithium Ion battery so that you can take your SeeSnake monitor to work in places it has never been before. Additionally, the new line of monitors includes a line trace peg to enable you to easily locate the entire push cable with a locator and transmitter

Recording Accessories RIDGID SeeSnake modular recording capability allows you to add the latest recording capabilities to new monitors as well as any legacy monitor with a video output. The recording accessory line allows you to buy the configuration you want while maintaining the the future.

SeeSnake HQ™ SeeSnake HQ is powerful installed software for monitoring, recording and managing digital inspection data in the field. Record and document your findings, burn DVDs and export to a USB thumb drive.

Products & Equipment

option to easily upgrade your recording capabilities in

67

4.16 Accessories & Supplies # 22004

# 22007

Leatherman Multi-Tool

TAPE Measure

# 22009

# 30170

Water Bottle & Belt Holder

12V Plug for Accessory Power

# 26009

# 29150

Urethane probe tips

XLI Gear Bag

Depth of Cover Probes # 25026

# 26200

6.4mm (¼”) Light Weight

# 26210

9.5mm (3/8”) Standard

Products & Equipment

Lithium Battery for XLI Pack

68

# 29160

# 22010

XLI Stake Bag

XLI Survey Gators

Assor™ ent of ruggedized cases for all you XLI Survey equipment Protect your inves™ ent during storage and transportation.

# 30190

# 29300

27” x 18.1” x 10.9”

# 29310

9.375” x 7.25” x 4.125”

# 29320

16.9” x 10.0” x 6.5”

# 29330

13.4” x 8.9” x 5.6”

# 29340

19.9” x 14.17” x 7.79”

Pocket Weather Station

Wahl WS3000 Pocket Weather Station allows you to track weather in the palm of your hand ensuring your leak survey is effective!

Current Windspeed / Maximum Windspeed Current Temperature / Relative Humidity and Dewpoint Altitude / Current Barometric Pressure Severe Weather Audio Alarm (if the barometric pressure falls or rises 6 millibars over a 3-hour period) Relative Humidity, Barometer and Altimeter functions can be recalibrated, if required.

Temperature / Wind Chill / Heat Index

16-hour Pressure Graph 10-second Average Water Resistant to 4” / Floats Threaded for Tripod mounting Includes: replaceable 400 hour Lithium Battery Lanyard, User Manual, and Voltage Input numbers*

Products & Equipment

Replaceable Impeller

69

5.0

Training Courses 5.1

XLI Falcon

5.2

XLI Field Mouse

5.3

Master Class

5.4

Certification Programs

5.5

5.5.1 Field Technician 5.5.2 XLI Specialist

5.1 XLI Falcon SPECTRUM XLI OFFICE TRAINING â&#x20AC;&#x201C; XLI FALCON SOFTWARE

Day 1

Introduction to XLI Falcon & the XLI surveys

Advanced File Structure & Management

Data collection & file structure

Raw Log Parsing

XLI Data Files

Advanced Data Management & File Naming Conventions

XLI Survey Data Management

XLI Data Processing 201

Data Sorting

Data Sorting

The Basics Default Sort Proximity Sort

Advanced Default Sort

Spatial Correction

Sort After Anchor Sort

Search Functions Point Intervals Bends

Survey Data Analysis The Anomaly Matrix Wizards Search Functions Anomaly Flagging

Report Preparation

Training Courses

Data Recovery

XLI Data Processing 101

Offsets Manual Correction Snapping

72

Day 2

Anchor Functions ROW Feature Alignment Page Set up and Printing Data Exports

Proximity VS Reverse

Spatial Correction GPS Coordinate Evaluation DOC Wizards Temporal Spacing Interpolations Anchor Spacing

Search Functions Advanced Uses The Data Table

Survey Data Analysis Reviewing the Raw Log Reading the Waveform DOC Location Factors CP Anomalies ACVG Normalization AC Attenuation

Report Preparation Summarizing the survey Prioritizing Anomalies

5.2 XLI Field Mouse FIELD MOUSE 101 (1 Day)

XLI GPS Course (4 hours)

Introduction to XLI Field Mouse (FM) & XLI surveys Overview of data collection and file structure XLI Field Data Collection XLI Field Survey Data Management

Geodetic Coordinates Datums Latitude and Longitude U™ (10™ VS 6™ ) WGS 84 Coordinate Conversions How GPS Works Frequency – Single VS Dual Limitations for GPS Horizontal VS Vertical DOP VS RMS Multipath Masking Ephemeris Scheduling Differential GPS (DGPS) Theory Real-time VS Post Processing WAAS, EGNOS, MSAS OmniStar – Dual VS Single Freq.

GPS Offsets

Ohms’ law Electric Circuits AC VS DC Frequency Inductive vs. Conductive vs. Deductive EM field response Slopes & Bends Field Safety Field Procedures and Practice

AC Coating Survey (2 Day) Review Pipeline Locator Theory Current VS Voltage ACCA & ACVG Theory Survey Limitations Survey Procedure Field Safety ACCA ACVG ACVG Normal VS Parallel Interference Data Analysis XLI CAP

XLI Pipeline Mapping (4 hours) XLI Data Indexes XLI ROW ALIAS Pipeline ALIAS ROW State ROW Land Use ROW Terrain ROW Accessibility Positioning the GPS & Locator Road Crossings Off Pipeline Points Pipeline Photography

XLI CP Survey* (1 day) *Course Prerequisite = NACE CP Tester or min 2 yrs working experience

Ohms’ law CP Theory Review Electrochemical Corrosion How CP Works Impressed Current CP Sacrificial Anodes Half-cells CP Meters CP Criteria CP Readings The XLI Waveform Analysis Switching Spike Avoidance Correcting for Interference AC & DC Telluric

Training Courses

Pipeline Locator Theory & Use (1 Day)

73

5.3 XLI Specialist Buried pipelines are at risk of failures due to corrosion, environmental cracking, third party damage, and even geotechnical anomalies that can cause expensive and disruptive interruptions to pipeline operations.

There are a suite of inspection techniques available to the pipeline operator to minimize these risks and to prevent leaks and failures.

This is an intensive course designed to introduce the theory and application of all the above ground survey techniques available to inspect buried pipelines.

What do you gain?

A working knowledge of the NACE standard for applying ECDA to a pipeline system.

An understanding of the theory of the indirect inspection techniques including:

Line Locating, Mapping and Depth of Cover

AC Coating Surveys (ACVG and ACCA)

DC Coating Surveys (DCVG and Side Drain)

Cathodic Protection Close Interval Potential Surveys

Leak Detection Surveys

Pipeline Inspection Techniques We introduce pipelines as a transportation industry, competing with tanker ships, barges, and trucks. We look then look at the efficiencies gained by operation of pipelines VS the alternatives. We then look at the safety of pipelines, and what threats we can identify to pipelines: third party damage (accidental, theft and terrorist), Corrosion, Cracks, Operational, Geotechnical. This discussion is followed by the means of prevention and inspection, from the steel mill, through transportation and construction and right into operation. Once built and operating, we need to conduct ongoing inspections, so we

Training Courses

discuss the in-service pipeline inspection methods and the applicable standards, benefits

74

and limitations of each: Hydro re-test â&#x20AC;&#x201C; pressure testing, ILI â&#x20AC;&#x201C; Smart pigging, ECDA 4 Step Process, Also now ICDA and SCCDA for internal corrosion and stress corrosion cracking.

Throughout this discussion, we will describe the application of numerous standards: API 579, API 570, API 1163, ASME B31.4 & B31.8, ASME/ANSI B31.8S, and specifically of NACE SP0502-2010 for ECDA

ECDA Process In this discussion we cover the 4 Step Process described in NACE SP0502-2010 - Pipeline External Corrosion Direct Assessment Methodology: Pre-Assessment, Indirect Inspections, Direct Examinations, Post Assessment. We then discuss why ECDA is used, which types of pipelines it can and canâ&#x20AC;&#x2122;t be used for, and the expected costs of first time and repeat ECDA inspection programs. The final discussion is a comparison of ECDA versus the more popular ILI and Pressure Testing inspections, and how different inspections can also be complementary.

Pipeline Locator Theory & Use Accurate pipeline location is key to general pipeline operations and especially critical for above ground surveys. This discussion covers the theory and operation of electromagnetic pipe and cable locators as well as ground penetrating radar. We then discuss the limitations and the impact of those limitations on ILI and ECDA inspections.

GPS Theory and Data Most utilities are now being managed with Geographic Information Systems (GIS), which requires Geodetic Coordinates. Most companies are acquiring and mapping their systems with Global Positioning Systems (GPS) in order to efficiently and accurately map, locate and reference assets and features. There are dozens of complicating factors that are normally only understood by surveyors and scientists, and by understanding these the pipeline integrity professional can more confidently work with this modern technology to allow efficient collection and access to critical pipeline data.

Pipeline Mapping Following the discussion on GPS and GIS, the next issue we tackle is how to collect the indexing mapping and integrity data to allow reliable and repeatable use.

Training Courses

data needed in GIS for pipeline integrity purposes. This topic will cover methods of

75

Coating Survey Coatings are put on pipelines to protect them from corrosion; they are the first line of defense against corrosion and environmental cracking. The ILI technique is the most common inspection used to find corrosion damage and environmental cracking, but ILI requires that the operator waits for damage to occur to the pipeline, and when that damage is large enough to exceed the threshold for detection on the ILI tool, it will be detected and reported â&#x20AC;&#x201C; a reactive approach. There have been recent advances made in the AC and DC coating survey techniques and the most recent technologies bring a new level of reliability and confidence in the resulting data. We will describe the theory and technique and technology used for ACVG, DCVG, and ACCA, as well as the expectation for the results of these inspections.

Cathodic Protection The second line of defense for a pipeline is the cathodic protection system.

Understanding CP theory and operation are critical to understanding pipeline integrity. In this discussion we cover the theory and methodologies for applying, maintaining CP on a pipeline system, and then discuss the inspection of CP to ensure adequate protection on a pipeline.

Leak Detection Surveys Despite comprehensive pipeline integrity management plans, sometimes a pipeline still develops a leak, and locating the leak, or even ensuring no leaks exist can be a challenging problem. There are reliable and efficient methods of locating methane from natural gas pipeline leaks, liquid from water and liquid petroleum product leaks. We will discuss the latest techniques and technologies and how these can be applied to many pipeline systems.

Outcome of the Master Class By the end of this intensive two-day Master Class, you will take back to your organization an impeccable knowledge on how to implement a comprehensive Integrity Management

Training Courses

Program for pipelines, apply ECDA to a pipeline system, determine, assess and mitigate

76

the major threats of pipeline integrity and thus enhance your pipeline safety and reliability.

The focus will not only be on establishment of a program but also gives the pipeline owner/engineer/operator indirect inspection techniques such as pipeline mapping, AC/DC coating surveys, cathodic protection and leak detection surveys. The emphasis throughout is on practical, ready-to-apply techniques that yield immediate and costeffective benefits.

5.4 Certification Programs 5.4.1 XLI Field Technician Gain additional benefits from factory training on the use of your Spectrum XLI equipment and software.

Certified XLI Field Technician Training (3 Day Certification Course) XLI field certification allows priority technical support from Spectrum XLI via text, email, Skype and voice call.

In-house*

On Client Site**

$1200.00/person

$1700.00/day +

Includes 1 day of theory,

$250 per person

1 day of software,

up to 5 maximum per instructor

1 day of field experience

5.4.2 XLI Specialist Training Factory Certified XLI Specialist Training (5 Day Certification Course) Prerequisite: XLI Field Training, NACE CP1 and minimum 3 years survey experience.

Factory certified XLI Specialists can train and certify other employees of their company for $250 each.

In-house Only* $5000.00/person Includes 1 day of advanced XLI Falcon software training

*Course includes morning coffee/tea and pastries, in-house catered lunch and afternoon break coffee/tea and snacks. ***The Following requirements also apply: Travel, sub and facility expenses are on top of that.

Courses will require HDMI projector, classroom / conference seating for trainees.

Field training will also require access to an outdoor buried line for using equipment.

Field equipment training will also incur the cost for freight of equipment to training location.

No meals, beverages or other included in cost.

Training Courses

1 day of advanced equipment training.

79

6.0

Support & Warranty 6.1

Calibration

6.2

Warranty

6.1 Calibration Spectrum XLI can calibrate and issue calibration certificates as needed for the digital volt meters in all your Spectrum XLI controllers. Our quick turnaround service normally completes the calibration and ships your equipment back to you within 2 business days.

It is recommended in NACE SP0207 - Performing Close-Interval Potential Surveys and DC Surface Potential Gradient Surveys on Buried or Submerged Metallic Pipelines & NACE TM0109 - Aboveground Survey Techniques for the Evaluation of Underground Pipeline Coating Condition that voltage measuring devices used for CP CIPS and coating surveys be calibrated or checked for calibration yearly, or as per manufacturer specifications.

Join XLIâ&#x20AC;&#x2122;s annual calibration program, and before your current calibration certificate expires, we will ship a certified, tested replacement Controller that is yours to keep. You simply open the box, take out the new Controller, replace it with the old one, and call FedEx. You donâ&#x20AC;&#x2122;t even have to fill out the shipping label; it will be pre-filled when you receive it.

Reminders will be sent out via e-mail when approximately two months remain in the current Certificate of Calibration.

You will receive a calibrated Spectrum Controller with a Certificate of Calibration valid for 1 year delivered to you before you need to ship the old one back. Each replacement unit will include: Spectrum Controller in good to very good condition Certificate of Calibration Return shipping label

Support & Warranty

Box

82

Controllers not returned within 60 days will be automatically billed at present retail value.

Contact Spectrum for full details.

6.2 Warranty Shipping & Delivery All sales are FOB basis; the risk passes to customer as soon as the goods leave our premises. If the delivery is postponed for any reasons, storage of the goods in a third party warehouse shall also be at the customer’s risk and responsibility. On intimation to the Buyer concerning the readiness of the goods for shipment on FOB basis, the Buyer must ensure full insurance cover for any loss or damage.

Warranty XLI warrants to the original consumer purchaser (“you”) that new XLI products (“Products”) will be free from defects in material and workmanship for the Standard Warranty Period for the relevant Product. The start of the warranty period is the documented date of your purchase of the Product from XLI or XLI’s authorized reseller. The warranty period on replacement Products is the remainder of the warranty on the original Product or 90 days, whichever is longer.

This limited warranty applies only to the XLI products that can be identified by the original, unaltered XLI trademark, trade name or logo affixed to them. XLI does not warrant any product that is not manufactured by, for, or with permission from XLI.

This warranty does not cover any of the following conditions: Abuse, unreasonable use, mistreatment, or neglect Unusual physical or electrical stress or power fluctuations Damage caused by modification or repair not made or authorized by XLI Products whose XLI Serial Number and/or Material Number label have been removed, torn or defaced Damage caused by use of non-XLI packaging Damage caused by improper or improperly used packaging

Further, this limited warranty is void if the Product cover, or any label or seal on the Product, is removed or damaged.

IN PARTICULAR, BUT WITHOUT LIMITATION, XLI SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES OR CONDITIONS OF SATISFACTORY QUALITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS OR ANY OTHER WARRANTY ARISING FROM A COURSE OF DEALING OR USAGE OF TRADE. NO XLI DISTRIBUTOR, RESELLER, DEALER, AGENT OR EMPLOYEE IS AUTHORIZED TO MAKE ANY MODIFICATION, EXTENSION OR ADDITION TO THIS WARRANTY.

The full Warranty description is available from the XLI Sales Department.

Support & Warranty

Support & Warranty

Products that are determined to be stolen.

83

info@spectrumXLI.com (780) 436-4400 | 1-866-434-7872

www.spectrumXLI.com