Page 1

So-Pac

2013 m a r i n e

equipment catalogue

A COMPREHENSIVE SELECTION OF QUALITY MARINE PRODUCTS

www.sopac.co.nz


OUR BRANDS Welcome to So-Pac Marine’s catalogue for 10-20 m boats. We are pleased to release this catalogue featuring a wide range of quality marine products for boats up to 20 m. For more information about the products in this catalogue please contact us or visit our website www.sopac.co.nz This Catalogue is designed to make it easy for you to find the product you need and to make the ordering process fast and hassle free. We hope you enjoy using it and we look forward to supplying you with the best quality products and services. From the Sopac team

Happy Boating Thrusters, Stabilisers & Auxiliary Propulsion:

Steering & Control:

Deck Equipment & Hardware:

So-Pac m a r i n e Batteries, Electrical & LED Lighting:

THE HEART OF YOUR SYSTEM

Plumbing & Water Treatment:

HVAC:

SIGMAR Boat Care:

Galley:

B

Equipment Catalogue 2013 /JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


CONTENTS BOAT MAINTENANCE

1 Anodes 11 Teak Care 12 Acrylic Care 12 Bilge / holding Tank Treatment 13 Stain & Oxidation Removers 13 Hull Cleaners 14 Hull Polishes 14 Hull Waxes 15 Inflatable Boat Care 15 Metal Cleaners & Polishes 16 Greases & Lubricants 16 Tapes & Adhesives 17 Toilet Maintenance 18 Water Tank Treatment

BOAT OPERATING EQUIPMENT 25 Autopilot Pumpsets - Reversing 26 Autopilot Pumpsets - Continuous 27 Mechanical Autopilot Drives 27 Hydraulic 36 Auxiliary Propulsion Unit 37 Bow & Stern Thrusters 38 Bow & Stern Thrusters 39 So-Pac Marine, Steering Specialists 40 Heavy Duty Cylinders 57 digital input devices 66 motor starter & alarm systems 70 Heavy Duty Helm Valves 71 Heavy Duty Header Tank 72 Autopilot Interface 73 Jog Levers 74 Housings & Adapters 75 Rudder Follow-Up Unit 76 Reversing Pumpsets 80 Wagner Hydraulic Steering 84 Yacht Steering Systems 85 Autopilot Tiller Arm Adapters 86 Yacht Pedestals 88 Yacht Pedestal Accessories 89 More Info / Catalogues 89 Yacht Pedestal Hardware Kit 90 Stabilisers 91 Trim Tabs

STEERING WHEELS 95 97

Edson Pro-Series Power Wheels Leather Wheel Rim Covers

COOKING & GALLEY

99 Magma griddle / hot plates 100 Magma Round BBQs 102 Round BBQ Mounts 103 Magma Gourmet BBQs 105 Connoisseur Gas Grills 106 Gourmet & Connoisseur Mounts 109 Cartridges 109 Valves 109 BBQ Accessories 111 Magma Bait Tables 112 Bait Table Mounts 114 Magma BBQ Replacement Parts

ELECTRICAL

125 Batteries 127 Alternators 144 Underwater Lighting 145 Underwater Camera 146 Accon Pop-up Lights 147 Mounts 148 Mast-Mount Antenna Platforms

HARDWARE

149 TV Lift 150 Bolts & Catches 152 Door Hardware 152 Door Locksets 153 Panel Anchors 154 Hasps & Staples 154 Hatch Fittings 159 Lift Handles & Rings 160 Bow Rollers 161 Bimini Hinges 162 Boarding Ladders 163 Bollards 163 Chocks 164 Cleats 168 Deck Fills 169 Hand Rails 170 Hawse Pipes 170 Latches 171 Mast Steps 171 Pad Eyes 172 Rod Holders 173 scuppers 173 Vents 175 Thru Hulls 175 Edson Hardware 176 Plastic Deck Hardware 177 PLASTIC HINGES 177 PLUMBING FITTINGS

HATCHES & PORTLIGHTS 180 181 182 184 185 186 187 188

Sopac Plastic Access Hatches Stainless Steel Hatches Stainless Steel Ports 2400 Series Cast Hatches 2400 Series Hatches - Types Freeman Round Cast Hatches - Flush Freeman Oval Cast Hatches - Flush Freeman Rectangular Cast Hatches - Flush

188 Freeman Square Cast Hatches - Flush 189 Hatch Lifters 189 Hatch Stays

HVAC - HEATING & AIR CONDITIONING 191 HVAC - HEATING & AIR CONDITIONING 192 Heater Accessories 193 Hydronic Water Heaters 194 Hydronic Cabin Heaters 198 Circulation Pumps 199 Pump Chart 199 Plumbing 200 Heat Exchangers & Exhaust Accessories 201 Thermostats 202 Switches 203 Air Conditioners 207 watermakers

PLUMBING & PUMPS

209 Bathroomware 212 Exhaust Waterlocks & Syphons 214 Plumbing Fittings 221 Valves & Seacocks 234 Raw Water Strainers 249 Edson Diaphragm Pumps 250 40 GPM DIAPHRAGM PUMPS 251 18 GPM DIAPHRAGM PUMPS 252 paragon senior water pump 258 Oil Change Systems

INDEX

INDEX3

Equipment Catalogue 2013/JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

TERMS & CONDITIONS OF TRADE

C


BOAT MAINTENANCE

ANODES Why Use Anodes? The protection of the underwater metal parts on your boat or motor from corrosive electrolytic action is a very real and necessary concern. The use of an activated alloy such as an “anode” will help (anodes will attract the corrosion action to themselves and away from expensive metal parts). Fortunately anodes are relatively inexpensive and are readily available. Factors such as warm water temperatures, polluted water and stray current corrosion can cause your anodes to waste away at an accelerated rate so it is wise to check them on a regular basis. What is Electrolytic Corrosion? When two dissimilar metals are electrically connected and submerged in a solution or electrolyte a natural chemical reaction takes place. This chemical reaction forms a circuit where the least noble metal (the anode) will begin to break down leaving the most noble metal (the cathode) intact. For example, a sailboat may have many metals electronically connected in a salt-water solution. The stainless steel shaft is more active (least noble) than the bronze propeller. In this case the stainless steel shaft will naturally begin to breakdown leaving the propeller intact. Since propeller shafts are expensive to replace it is easy to protect these metals by adding a Martyr™ anode such as a CMX or Prop Nut. The Martyr™ anode is highly active and will corrode instead of the other metals it is electrically connected to. ASK FOR THE FULL MARTYR CATALOGUE

PROP SHAFT ANODES - STREAMLINED 100% Circular Inside

Streamlined football shaped Zinc anodes easily attach to the prop shaft of your boat Code

ID (Shaft Dia) mm

OD

Length

Weight

mm

mm

Kg

CMX01 CMX02 CMX03 CMX04 CMX05 CMX05A CMX06 CMX07 CMX08 CMX09 CMX10 CMX11 CMX12 CMX13 CMX15

19 (3/4”) 22 (7/8”) 25 (1”) 28 (1-1/8”) 32 (1-1/4”) 32 (1-1/4”) 35 (1-3/8”) 38 (1-1/2”) 44 (1-3/4”) 51 (2”) 57 (2-1/4”) 63 (2-1/2”) 70 (2-3/4”) 76 (3”) 89 (3-1/2”)

54 54 54 54 63 63 63 63 82 82 108 108 120 120 149

54 54 54 54 63 63 63 63 73 73 95 95 92 92 98

0.58 0.50 0.45 0.41 0.50 0.73 0.68 0.61 1.14 0.91 2.66 2.39 3.38 2.95 4.10

Interlocking Halves

Extra Alloy Around Fastener Martyr shaft and rudder anodes come with combination fasteners. Use your screw driver or allen key!

PROP SHAFT ANODES - LIMITED CLEARANCE ‘Donut’ shaped Zinc anodes for when there is limited clearance to fit a streamlined anode Code

CMC01 CMC03 CMC04 CMC05 CMC06 CMC07 CMC08 CMC09

ID (Shaft Dia) mm

OD

Height

Weight

mm

mm

Kg

19 (3/4”) 25 (1”) 28 (1-1/8”) 32 (1-1/4”) 35 (1-3/8”) 38 (1-1/2”) 44 (1-3/4”) 51 (2”)

54 63 63 63 76 76 89 89

25 32 32 32 32 32 35 35

0.30 0.31 0.55 0.50 0.45 0.70 0.68 1.05

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

1


BOAT MAINTENANCE

RUDDER & TRIM TAB ANODES Rudder and trim tab anodes simply attach to your rudder or trim tabs to prevent corrosion Code

Anode Type

Diameter mm

Thickness mm

Weight Kg

CMR01 CMR02 CMR03 CMR04 CMR05

trim tab disc trim tab disc trim tab disc trim tab disc trim tab/rudder disc

47 71 95 127 130

6 12 12 16 22

0.31 0.55 0.50 1.46 1.85

TRIM TAB ANODE Code

Length mm

Width mm

Thickness mm

Weight Kg

CMBNT1AZ

95

25

12

0.2

38mm (1-1/2”)

PENCIL ANODES - WITH PLUG Zinc engine pencil anodes complete with engine plug Sopac Code Yanmar Pencil Anodes CM272100200200 CM272100200300Z Martyr Pencil Anodes CME0 CME00 CME1 CME2 CME3 CME4

Length mm

Diameter mm

NPT

UNC

Weight Kg

19 29

20 19

1/8 3/8

8mm 8mm

0.02 0.07

45 51 51 51 51 92

10 6 13 16 19 19

1/4 1/8 3/8 1/2 3/4 3/4

5/16 1/4 3/8 7/16 1/2 1/2

0.04 0.02 0.08 0.11 0.20 0.31

UNC

PENCIL ANODES - ANODE ONLY Zinc engine pencil anodes alone without plug

2

Code

Length mm

Diameter mm

NPT

Weight Kg

CMEZ0 CMEZ00 CMEZ1 CMEZ1D CMEZ1E CMEZ1F CMEZ2 CMEZ3 CMEZ4

45 51 51 45 38 32 51 51 92

10 6 13 13 13 13 16 19 19

1/4 1/8 3/8 3/8 3/8 3/8 1/2 3/4 3/4

0.04 0.02 0.08 0.07 0.06 0.06 0.11 0.20 0.31

NPT

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT MAINTENANCE

MERCURY BRAVO III PROP NUT ANODE Internal Nyloc ring provides secure fit to shaft Uses prop nut D-replacement anode Available in magnesium and aluminium also Weight

mm

Outer Diameter mm

78

54

0.54

Code

Shaft Size mm

Thread

Length

Size

CMBRAVO3PN

25

1” 14UNS

Kg

MAX PROP NUT ANODES Propeller nut anodes for Max Prop Code

Height mm

Outer Diameter mm

Fastener Type mm

Weight Kg

CMMP63Z

45

67

20 x 5 x 0.8 / 4mm hex key

0.29

CMMP70Z

51

73

20 x 5 x 0.8 / 4mm hex key

0.54

CMMP83Z

64

84

25 x 6 x 1.0 / 5mm hex key

0.65

PROP NUT ANODES - COMPLETE All prop nut anodes are available in magnesium and aluminium also Weight

mm

Outer Diameter mm

38 54 76 78 89 89 92 102

32 41 48 54 60 65 73 83

0.21 0.34 0.63 1.00 1.14 1.36 2.00 2.39

Code

Shaft Size mm

Thread size SAE

Length

CMPNAZC13 CMPNBZC11 CMPNCZC10 CMPNDZC09 CMPNEZC08 CMPNFZC07 CMPNGZC07 CMPNHZC06

19 22 25 32 35 38 45 25

1/2 NC 13 5/8 NC 11 3/4 NC 10 7/8 NC 9 1 NC 8 1-1/8 NC 7 1-1/4 NC 7 1-1/2 NC 6

Kg

Prop Nut Anode

PROP NUT ANODES - ANODE ONLY Nylon patch is good for initial application only. We recommend using loc-tite or thread tape for extra hold when replacing anodes Code

CMPNZA CMPNZB CMPNZC CMPNZD CMPNZE CMPNZF CMPNZG CMPNZH

Weight

mm

Outer Diameter mm

38 54 76 78 89 89 92 102

32 41 48 54 60 65 73 83

0.09 0.09 0.45 0.68 0.80 0.91 1.32 1.48

Shaft Size mm

Length

19 22 25 32 35 38 45 25

Kg

Replacement Prop Nut Anode

STREAMLINED PLATE ANODES Code CMZPMW CMZPNW CMZPOW CMZPPW

Description

Length mm

Width mm

Thick mm

Weight Kg

Small ‘M’ Plate Small ‘N’ Plate Med. ‘O’ Plate Med. ‘P’ Plate

114 152 152 229

64 76 102 127

235 19 19 21

0.91 1.48 1.99 4.20

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

3


BOAT MAINTENANCE

STREAMLINED BOLT ON ANODES

DIVERS DREAM

DIVER MINI

CMM24

CMZ404

CMM25

CMM30

CMZHC 2,3,5

Code

Description

Length mm

Width mm

Thickness mm

Between Centres mm

Hole Diameter mm

Weight Kg

CMDIVER CMDIVERMINI CMM24 CMM25 CMM30 CMZ404 CMZHC2AZ CMZHC3AZ CMZHC5AZ

Divers Dream Mini Divers Dream Small Small Medium Medium Medium Medium Large

305 152 121 235 159 235 146 159 203

152 102 51 86 70 86 64 70 102

13 13 19 19 16 19 19 19 19

51 - 229 32 - 108 32 98 121 73 57 111

13 13 6 6 6 13 13 - 19 13 - 19 13 - 19

3.77 1.02 0.24 1.78 0.86 1.55 0.94 0.91 2.05

Hole Diameter mm

Weight

13 7 7 -

4.8 10.3 0.15 4.60 5.10 2.70 1.00 0.60 0.95

TEAR DROP SHAPED ANODES Code

CMT20 CMT21

Hole Diameter mm

Weight

mm

Between Centres mm

35 25

32 41

6 8

0.17 0.45

Length

Width

Thickness

mm

mm

89 133

45 51

Kg

COMMERCIAL ANODES Weld on and bolt on anodes for bottom plates, keels, rudders, shaft tunnels, ballast tanks, bilges, cargo tanks, equipment and structures. Commercial teardrop, streamlined & plate anodes

CMZ01

CMZ22 Code

CMZ01 CMZ12 CMZ13 CMZ19 CMZ22 CMZ03 CMZ04 CMZ06 CMZTSZ

4

CMZ03, CMZ04, CMZ06, CMZ19 Mounting

Bolt-on Bolt-on Bolt-on Weld-on Weld-on Weld-on Weld-on Weld-on Weld-on

CMZTSZ

Length

Width

Thickness

mm

mm

mm

Between Centres mm

305 101 152 635 356 305 152 127 228

152 31 44 79 165 76 89 64 76

32 19 25 32 38 32 25 25 34

152 46 86 -

Equipment Catalogue 2013 /JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

Kg


BOAT MAINTENANCE

HONDA ANODES Code

Weight Kg

CM826134Z

0.25

MERCURY & MERCRUISER ANODES Code

Weight Kg

CM31640 CM34127 CM34762 CM43396 CM439942 CM43994 CM46399 CM55989 CM762145 CM806105 CM806188 CM806189 CM806190 CM818298 CM821629 CM821630 CM826134

CM34762

CM46399

CM806105

0.45 0.73 0.27 0.66 1.52 0.91 0.36 0.11 0.31 0.23 0.18 0.10 0.32 0.64 0.75 1.00 0.25

CM43994

CM821629

CM806188

CM55989

CM31640

CM821630

CM43396

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

CM34127

CM806189

CM818298

CM762145

CM806190

CM826134

5


BOAT MAINTENANCE

YAMAHA ANODES Code

Weight Kg

CM6644537101Z CM6884525101Z CM6884537102Z CM6E04525111Z CM6E54537101Z CM6G5425101Z CM6H14525102Z CM6J94537100Z CM6K14537100Z

CM6644537101Z

0.27 0.03 0.48 0.10 0.42 0.91 0.47 0.50 0.42

CM6884537102Z

CM6E54537101Z

CM6G5425101Z

CM6E04525111Z

CM6K14537100Z

CM6J94537100Z

CM6H14525102Z

CM6G5425101Z

YANMAR ANODES Code

Weight Kg

CM19642002652Z

0.51

PENCIL ANODES - ANODE ONLY Zinc engine pencil anodes alone without plug Code

CMEZ0 CMEZ00 CMEZ1 CMEZ1D CMEZ1E CMEZ1F CMEZ2 CMEZ3 CMEZ4

6

Length

Diameter

mm

mm

45 51 51 45 38 32 51 51 92

10 6 13 13 13 13 16 19 19

UNC

Weight Kg

5/16 1/4 3/8 3/8 3/8 3/8 7/16 1/2 1/2

0.04 0.02 0.08 0.07 0.06 0.06 0.11 0.20 0.31

UNC

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT MAINTENANCE

VOLVO ANODES Code

Weight

CM823661Z CM832598Z CM838929Z CM852835Z CM872139Z CM872793Z CM875812Z CM875821Z CMV18

0.15 0.91 0.04 0.79 0.66 0.11 0.92 0.61 0.69

Kg

CM875812Z

CM823661Z

CM875821Z

CM872793Z

CM852835Z

CM838929Z

CMV18

CM872139Z

CM832598Z

OMC / JOHNSON ANODES Code

Weight Kg

CM392123Z CM393023Z CM398331Z CM431708Z CM984513Z

0.76 0.22 0.32 0.27 0.94

CM984547Z

0.91

CM393023Z

CM984513Z

CM392123Z

CM431708Z

CM398331Z

CM984547Z

ANODE KITS These all in one kits include 1 Cavitation Plate, 2 Trim Cylinder Anodes, 1 Trim Tab Anode and all the required fasteners. Code

Description

CMBRAVO23KITA CMVERADO6KITA

Aluminium Anode kit for Bravo 2 & 3 Aluminium Anode kit for Verado

Equipment Catalogue 2013/JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

7


BOAT MAINTENANCE

8

Equipment Catalogue 2013 /JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT MAINTENANCE

Equipment Catalogue 2013/JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

9


BOAT MAINTENANCE

10

Equipment Catalogue 2013 /JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT MAINTENANCE

TEAK CARE TEAK CLEANERS & BRIGHTENERS The unique biodegradable cleaning system that works like harshly formulated competitors but is gentle to hands, wood, gel coat, marine hardware and finishes. Code

Description

Size

TW-CB-01 TW-CB-02 TW-CB-04 TW-CB-06

Cleaner & Brightener Combo Pack Cleaner & Brightener Combo Pack Cleaner Only Brightener Only

0.95 litres 3.8 litres 3.8 litres 3.8 litres

TEAK DRESSING & SEALER The Original and unique formula that lasts longer and looks brighter and cleaner than “teak oils” Teak Wonder is the easiest of sealers to maintain and renew. Top Rated in independent testing and preferred by professionals for the maintenance of fine vessels Code

Description

Size

TW-DS-01 TW-DS-02

Teak Wonder Dressing and Sealer - Small Teak Wonder Dressing and Sealer - Large

0.95 litres 3.8 litres

TEAK OIL - GOLDEN CLASSIC Code

Size

Y02.0737

500 mL

Products Features • • • • •

Premium oil and sealer for long lasting protection and improving appearance. Gives teak a warm golden colour. Provides a superior golden, long lasting finish which is highly UV resistant. Penetrates deeply into teak and other hard-wood. Easy to use and fast drying & water resistant.

TEAK OIL - CLEAR Code

Size

Y02.0738

500 mL

Products Features • • • • •

Premium oil and sealer for long lasting protection and improving appearance. Gives teak and other boating woods its natural colour back. UV and water resistant. Penetrates deeply into teak and other hard-wood. Easy to use and fast drying.

INTERIOR TEAK OIL Code

Size

Y02.1185

250 mL

Product Features • • • •

This one part interior teak oil cleans, protects and restores colour to all kinds of interior teak, mahogany, dark oak, rosewood, and other dark wood. Great for regular maintenance, protects and improves its appearance. Repels water, prevents warping and gives a new looking shine. Removes scratches, spots, abrasions and water spots.

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

11


BOAT MAINTENANCE

ACRYLIC CARE ACRYLIC CARE - CLEANER & POLISHER Code

Size

Y02.1180

500 mL

Product Features • • • • • •

Restores shine and clarity to acrylic, polycarbonate, and most plastics. Removes dirt, dust and other grime. Leaves protective coating against new dust and dirt. Anti-static agent against dust. Spray on / wipe off application. Prevents stress cracking.

ACRYLIC SCRATCH REMOVER Code

Size

Y02.1181

500 ml

Product Features • • • •

Removes fine scratches from acrylic, polycarbonate and most other plastics. Cleans off stains, salt deposits and surface discolourations. Easy to use - just rub scratches at a right angle and buff off. Removes hazing from windshields, hatches, ports etc.

BILGE / HOLDING TANK TREATMENT TEAK WONDER - BILGE CLEANER CONCENTRATE Code

Size

TW-BC-01

0.95 L

Product Features • • • •

Will emulsify and destroy oil, related scum and bilges odour from your bilge. Strong and effective. Fast and easy to use. Can be used as a scum and grime preventative also.

OIL SORBENT SHEETS Code

Sheet Size

Pack Size

Y02.0104 Y02.1418

41 x 51 cm 43 x 48 cm

2 sheets 1 sheet

Product Features • • • •

The best solution for removing oil, fuel and other chemicals. Soaks up oil, but repels water. Absorbs up to 25 times it’s own weight. Great for bilges, engine rooms, petrol chemical spills or fill-ups.

PURYCLEAN - HOLDING TANK CLEANER / DISINFECTION

12

Code

Size

Y06.1033

500 grams

Product Features • • • • •

For cleaning and disinfecting of waste water tanks and systems. Eliminates unpleasant odour by disinfecting. Removes most kinds of deposits. Self acting, easy to use powder concentrate. 500 grams treats tanks up to 500 litres

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT MAINTENANCE

STAIN & OXIDATION REMOVERS MEDIUM DUTY RUBBING OXIDATION REMOVER Code

Size

Y02.0734

500mL

Product Features •

Removes stains, medium oxidation, scratches from fibreglass, gel coat and painted surfaces. Restores your gel coat lustre with fast-cutting formula. Easy to use, due to liquid formula. Hand or buffer application. Removes all stains without scratching. Protects surface with brilliant shine.

• • • •

COLOUR RESTORER, OXIDATION REMOVER Code

Size

Y02.2142

500 mL

Product Features • • • • • •

Brings back original colour and lustre. Removes medium oxidation, chalking and fading. Seals surface to protect against future fading due to weathering. Excellent for all coloured boats. Easy to use. Hand or buffer application.

HULL CLEANERS HEAVY DUTY BOAT WASH Code

Size

Y02.0007

500mL

Product Features • • • • •

Heavy duty and concentrated boat cleaner. Cleans all kind of materials. Removes all kind of dirt and leaves protective coating. More than 98% biologically degradable (OECD) method. Use with fresh or salt-water

YELLOW STAIN REMOVER GEL Code

Size

Y02.0102

500mL

Product Features • • • •

Removes organic discolouring from fibreglass, gelcoat and paint. Designed to remove the “yellow wave” in the bow, water line and exhaust. Removes algae and rust. Easy to use gel-liquid, wipe-on rinse-off. No scrubbing or rubbing.

LIGHT DUTY WASH & CARNUBA WAX FINISH Code

Size

Y02.1024

500mL

Product Features • • • • •

Quick and easy gloss every time you wash your boat. For everyday care. Cleans and leaves a high gloss finish. No hard rubbing or buffing needed. For use on fibreglass, metal and painted surfaces. Biodegradable (OECD method).

MEDIUM DUTY HULL AND GELCOAT CLEANER Code

Size

Y02.2175

500mL

Product Features • • • •

Cleans fibreglass and gel coat surfaces on decks and hulls Not for use on metal surfaces. Removes stains from grassy marine growth, scum lines, rust stains and organic discolouring. No hard buffing required, just wipe on, let the product work and rinse off.

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

13


BOAT MAINTENANCE

HULL POLISHES MEDIUM DUTY MARINE POLISH - SILICONE FREE Code

Size

Y02.0009

500mL

Product Features • • • • • •

Premium polish for all types of fibreglass, gelcoat and painted surfaces. Outstanding protection against fading and oxidation. Removes all kinds of dirt, stains and salt. Great for hulls and under-water. Hand or buffer application. Leaves a dazzling factory shine. No hard rubbing required. Super slick finish.

PREMIUM POLISH - WITH TEFLON Code

Size

Y02.0135

500mL

Product Features • • • • • •

Premium polish for all types of fibreglass, gelcoat and painted surfaces. Outstanding protection against fading and oxidation. Removes all kinds of dirt, stains and salt. Great for hulls and under-water. Hand or buffer application. Leaves a dazzling factory shine. No hard rubbing required. Super slick finish.

HULL WAXES PREMIUM HARD WAX - WITH TEFLON Code

Size

Y02.0469

500mL

Product Features • • • • •

Outstanding protection for all fibreglass, gel coat and painted surfaces. Lasts much longer than conventional waxes. Long lasting high-gloss protection against fading and oxidation. Repels dirt, stains and salt. Contains UV inhibitors. Super slick finish, no hard rubbing required. Water repellent.

MARINE WAX Code

Size

Y02.0735

300 grams paste

Product Features • • •

High-grade Carnuba wax blended with artificial waxes for long lasting protection for all kinds of fibreglass, gel coat and painted surfaces. Easy to handle. Non abrasive. For hand and buffer application. Outstanding shine. Contains UV inhibitors

CARNUBA BOAT WAX Code

Size

Y02.1191

500 mL

Product Features • • • •

Designed to provide high gloss and protect fibreglass / gelcoat, topside paint, painted aluminium, and metal surfaces. Liquid formulation combines carnuba wax and special blend of waxes which will restore shine and protects in one application. Easy to handle, gives outstanding shine. Non abrasive. Hand or buffer application. Contains UV inhibitors.

CLEANER & WAX - SILICONE FREE Code

Size

Y02.2172

500 mL

Product Features • • •

14

Designed to remove light to medium oxidation, clean, polish and protect fibreglass gelcoat and painted surfaces. Easy to use. Does not contain silicone. For hand and buffer application. Liquid formulation combine a compound with a special blend of waxes which restore shine and protect in one application. Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT MAINTENANCE

INFLATABLE BOAT CARE INFLATABLE BOAT CLEANER Code

Size

Product Features

Y02.1177

500 mL

• • •

Cleans colour on all kind of rubber, PVC and Hypalon inflatable boats. Cleans dirt, grime, scuff marks, oxidation waterline dirt and stains. Easy to use.

INFLATABLE BOAT REPAIR KIT Code

Size

Product Features & Specs

Y02.2217

Standard

• • • • •

Ideal for lightweight dinghies, towables, pool toys and swimming pools Contains Patches: 2x 35mm Dia, 1x 45mm Dia, 1x 73 x 78 mm 1x 6 gram tube of glue Emery paper & instructions

METAL CLEANERS & POLISHES MEDIUM DUTY METAL POLISH - WITH WAX Code

Size

Y02.0470

500 mL

Product Features • • • • •

Cleans polishes and protects stainless steel, chrome, copper and brass One - Step application, Gives new shine to all old surfaces Removes surface rust, light to medium oxidation, tarnishing and stains Special wax formula gives outstanding protection that lasts for months Will not leave ugly water spots or scratches

HEAVY DUTY STAINLESS & BRASS POLISH - WITH WAX Code

Size

Y02.2128

500 mL

Product Features • • • • •

Cleans polishes and protects stainless steel and brass One - Step application, Gives new shine to all old surfaces Removes surface rust, light to medium oxidation, tarnishing and stains Special wax formula gives outstanding protection that lasts for months Will not leave ugly water spots or scratches

MEDIUM DUTY RUST CONVERTER Code

Size

Y02.2147

250 mL

Product Features • • • •

Chemically designed to remove rust and corrosion without harming the metal Converts rust and corrosion to a stable, solid form Protects against new rust and corrosion Will give extra strong bond strength to future base coats and painting

SEA SOAP Code

Size

Y03.0018

300 mL

Compelling Benefits • • • •

Shampoo and shower gel for salt and fresh water Special components counteracting the drying effects of wind, sun & salt Very mild pH 5.5 with mountain herbs, Super concentrated formula Does not contain formaldehyde or dioxan, Perfect for sailors, surfers, campers, and swimmers

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

15


BOAT MAINTENANCE

SEA DISH WASH - CONCENTRATE Code

Size

Y03.0740

250 mL

Compelling Benefits • • • •

For dish washing in salt and fresh water Works great in salt water Very mild, Ssper concentrated formula Dries without leaving stripes, no need to wipe dry

GREASES & LUBRICANTS MULTI PURPOSE GREASE Code

Size

Y02.1183

250 grams

Compelling Benefits • • • • •

Lubricates, preserves & protects anything that slides, swivels, rotates, rolls or squeaks Highly resistant against extreme temperatures, salt water and corrosion Stays where you put it, prevents seizing and won’t wash away It retains its viscosity and consistency in all weather conditions Impervious against dirt, dust and grime

WINCH GREASE Code

Size

Y02.1184

250 grams

Compelling Benefits • • • • • •

Lubricates, preserves and protects each part of the winch Will seal all parts with a waterproof film Highly resistant against extreme temperatures, salt water and weather Will prolong the life of your winch Prevents seizing and will not wash away It retains its viscosity and consistency in all weather conditions

WINCH GREASE SPRAY Code

Size

Y02.1700

200 mL Aerosol

Product Features • • • • • •

Lubricates, preserves and protects all winches Easy to grease all parts, and reach those hard to get places Reduce friction and abrasion Will not wash away, stays where you put it and lasts a long time Comes with spray pipe for accurate spraying Without FCKW, High temperature resistance -30 to 130+ degrees C

TAPES & ADHESIVES ANTI SKID TAPE Code

Size

Colour

Y13.2915.01 Y13.2915.02

18 m x 50 mm 18 m x 50 mm

Black Yellow

Product Features • • • •

Anti slip tape for safety around your boat Water Resistant Extra durable For indoor and outdoor use

CAPTAIN TOLLY’S CREEPING CRACK CURE Code

Size

Y11.1192

60 mL

Product Features • • •

16

This penetrating copolymer sealant is formulated to be so thin that by using capillary action it can find its way inside fine cracks and set to a clear flexible seal Use on wood, rubber, glass, metals, fibreglass, lexan, ceramic & concrete Seals leaking windows and other hidden leaks Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT MAINTENANCE

X-TREME TAPE MARINE - SELF BONDING RIGGING TAPE Code

Colour

PS-59061 PS-59063

White Black

Product Features • • • • • •

X-Treme Tape® Marine is the essential, protective & repair wrap for all boaters, sailors & fishermen. X-Treme Tape® Marine can wrap rigging hardware, insulate & waterproof electrical wiring and whip ends of ropes. Forms a permanent air & water tight seal & prevents corrosion Stretches to 3 times its length & conforms to irregular shapes Tensile Strength of 600 psi, Remains Flexible to (-54°C) Insulates to 8000 V (for a single wrap), won’t melt up to +260°C 1” Wide x 10’ Long

TOILET MAINTENANCE PURYTECH HEAD TREATMENT DEODORISER SYSTEM Code

Size

Products Features & Specs •

Y06.0534

• • • •

Cleans & deodorizes bowl, lines, and helps to breakdown solid waste material with every flush For clean and fresh scent Easy to mount, Fits all 1/2” and 3/4” lines Lasts up to 400 flushes No formaldehyde, the best solution for your head!

TOILET LUBRICATING AND CLEANING OIL Code

Size

Y06.1031

100 mL

Products Features • • • • •

Keep your marine head working smoothly, condition / preserve pump leathers Removes salt deposits and keeps drain valves lubricated Gets deep inside the pump mechanism to clean & lubricate all parts Environmentally safe, as it is based on a natural oil Also for slide valves in camping toilets

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

17


BOAT MAINTENANCE

WATER TANK TREATMENT AQUA CLEAN - NO CHLORINE Code

Size

Amount of water treated

Y01.0001 Y01.0002 Y01.0004 Y01.0129 Y01.0705

100 mL 100 tablets 100 grams 50 mL 100 tablets

1000 litres 1 tablet per litre 10,000 litres 500 litres 1 tablet per 20 litres

Y01.0001

Y01.0129

Compelling Benefits • • • • •

Kills bacteria (like cholera, salmonella etc.) Conserves drinking water and potable water for up to 6 months Neutral in odour and taste Contact time: 2 hours Conserves drinking water on silver base

Y01.0004

Y01.0002

Y01.0705

CLEAN-A-TANK Code

Size

Y01.1032

500 grams

Products Features • • • • •

Removes calcareous deposits in water systems, improves taste & odour Non toxic as it works only with natural citric acid Should be used whenever calcareous and other deposits plug your system Easy to use. Use with AQUA CLEAN for purification & long storage After successful use you should disinfect your whole drinking system with PURA TANK, to kill algae and germs

PURA-TANK - NO CHLORINE WATER TANK CLEANER Code Y01.0005

18

Size 500 mL • Treats 160 L • • • •

Products Features For cleaning and disinfection of water tanks, pipes, pumps & outlets Active By Oxygen, Kills algae and bacteria Good for all kinds of materials, Easy to use and neutral in taste and odour A clean disinfected water tank is essential for safe drinking water We recommend to disinfect your water tank once or twice a year and use AQUA CLEAN to keep your water purified

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT OPERATING EQUIPMENT

THE NEW CHOICE IN MANEUVERING Advantages: ✓ Quiet operation ✓ No cavitation ✓ No large tunnels which are difficult to fit and cause more resistance ✓ No vulnerable propellers ✓ Outlet opening Ø 2 inch ✓ Flexible installation A complete Jet Thruster system includes: • Pump unit & pump outlet • Valve(s) • Installation kit • Nozzles available for all types of hull plating.

Jet Thruster Single casted SS316 3-way valve

water intake protected by a grid

SS316 flange threaded nozzle

Installation kit contains: Water intake combination (2x JT-90) - 1x Water inlet SS316 3” BSP - 1x 900 elbow SS316 F/F (Optional 2 x 450) - 1x Reducer 3” BSP/2½” BSP SS316 - 1x Ball valve 2½” BSP - 1x Hose connector 3”/76mm - 1x Hose 3”/76mm 3.3 ft - 2x Hose clamp 77-94mm

Pressure hose combination - 1x Flexible pressure hose - 6x Hose clamp - 2x Hose connector SS316 - 2x Elbow 450 SS316 M/F - 2x Ball valve - 1x Control panel with Joystick

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

19


BOAT OPERATING EQUIPMENT

Jet Thruster Combi

ximum for ma y rabilit v u e n ma

flanged threaded nozzle

pump unit

Installation kit contains: Water intake combination (2x JT-90S) - 1x Water inlet SS316 3” BSP - 1x 900 elbow SS316 F/F (Optional 2 x 450) - 1x Reducer 3” BSP/2½” BSP SS316 - 1x Ball valve 2½” BSP - 1x Hose connector 2½” BSP SS316 - 1x Hose 2½” BSP (3 ft) - 2x Hose clamp 77-94mm

Pressure hose combination ( 2” BSP JT-30/JT- 50, 2.5” BSP JT-90) - 1x Flexible pressure hose - 12x Hose clamp - 4x Hose connector SS316 - 4x Elbow 450 SS316 M/F - 4x Ball valve 2” BSP - 1x Control panel with Joystick

JT-50 110 thrust LBS 24V

JT-50 110 thrust LBS 12V Voltage DC E-motor capacity kW Current Master fuse Recommended battery capacity 12V Battery cable +/Max. operating time Water inlet Water outlet Pressure hose diameter Weight pump Pump unit 3-Way valve

12V 6kW 850A 1000A 1 x 165Ah 3ft -> 2/0 AWG 4 min. 1 x Ø/3⅟₂” Nozzle/1.26” 2” 80 LB LxWxH: 19⅟₂x16.73x13-14.17 inch LxWxH: 9.44x6.29x7.44 inch

JT-70 154 thrust LBS 24V Voltage DC E-motor capacity kW Current Master fuse Recommended battery capacity 12V Battery cable +/Max. operating time Water inlet Water outlet Pressure hose diameter Weight pump Pump unit 3-Way valve

20

24V 10kW 550A 600A 2 x 120Ah 3ft -> 2/0 AWG 4 min. 1x 4” BSP Nozzle Ø 1.81” 3” 95 LB LxWxH: 21.25x15.95x14 inch LxWxH: 11x9.25x9 inch

Voltage DC E-motor capacity kW Current Master fuse Recommended battery capacity 12V Battery cable +/Max. operating time Water inlet Water outlet Pressure hose diameter Weight pump Pump unit 3-Way valve

24V 6kW 380A 425A 2 x 105Ah 3ft -> 1/0 AWG 4 min. 1 x Ø 3⅟₂” Nozzle Ø 1.26” 2” 75 LB LxWxH: 19⅟₂x16.73x13-14.17 inch LxWxH: 9.44x6,29x7.44 inch

JT-90 198 thrust LBS 24V Voltage DC E-motor capacity kW Current Master fuse Recommended battery capacity 12V Battery cable +/Max. operating time Water inlet Water outlet Pressure hose diameter Weight pump Pump unit 3-Way valve

24V 14kW 770A 850A 2 x 165Ah 3ft -> 2/0 AWG 4 min. 1x 4” BSP Nozzle 1.81” 3” 130 LB LxWxH: 26.57x15x14.37 inch LxWxH: 11x9.25x9 inch

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


JET THRUSTER VERTICAL Pump unit placed in Vertical position, water intake direct on hull.

SINGLE

COMBI

425

50

250

350 35°

25°

15°

360,5

150

Water intake side

Project & Description Part No.

STD I-160-00 - Verticale Inlaat gelast configuraties

: STD I-160-00

Drawn

: JvH

Customer :

Date

: 20-12-2011

Reference :

Modified :

0.03

0.03

0.2

Do

:

Date

Material

:

Weight : 1.55 Kg

: 20-12-2011

NOT Scale

A4

0.2

0.2

Ra 3.2

Scale 1:5 Sheet 1 of 1

575

Note

22,63”

DIMENSIONS IN MILLIMETERS, ANGLES IN DEGREES TOLERANCES±0.2mm, ±1º UNLESS OTHERWISE SPECIFIED

7,2”

15

6

183

597,25

For installation of the vertical pump unit 5 different angled flanges are available to accommondate most hul angles.

©copyrights HMP

0

BOAT OPERATING EQUIPMENT

ø4”

9⅟₂”

240

101,6 190

IP cover available for installation of pump unit in Gasoline engine areas.

ø7,5”

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz Project & Description

:

DIMENSIONS IN MILLIMETERS, ANGLES IN DEGREES TOLERANCES±0.2mm, ±1º UNLESS OTHERWISE SPECIFIED

STD . - JT-50Pomp Gr1_6kW explosiekap V3

0.03

Drawn

: JvH

Customer :

Date

: 29-9-2011

Reference :

Modified :

Note

:

Date

Material

:

Weight : Kg

: 2-10-2011

0.03

0.2

Do

NOT Scale

A2

0.2

0.2

Ra 3.2

©copyrights HMP

Part No.

Scale 1:5 Sheet 1 of 1

21


BOAT OPERATING EQUIPMENT

Jet Thruster Single

Ø 60 mm.

JTS-30-00 / JTS-50-00

I-113-00

V-100-00

I-331-00 (2x)

I-114-00 (6x) I-307-00

I-318-00 (2x)

I-113-00

I-312-00

I-310-00

I-113-00

I-309-00

I-115-00 (2x)

I-308-00

I-316-00 (2x) I-317-00 (2x)

I-304-00 I-303-00 I-306-00 I-302-00

Jet Thruster Combi

V-201-00

I-213-00 V-200-00

* JT-90; 2x water intake. I-308-00

P-155-00 I-215-00 (2x)

I-318-00 (2x)

I-318-00

I-316-00 V-201-00 I-114-00

I-331-00

I-309-00 I-310-00 I-331-00 I-312-00

JTC-30-00 / JTC-50-00

Option 1:

Option 2a:

+

Option 2b:

+

I-113-00

Pump unit JT-30 / JT-50

JTS-30-00 / JTS-50-00

3-Way valve

V-101-00

Water inlet Ring 3” BSP Nut 3” BSP Seal Rubber Elbow 900

I-302-00 I-303-00 I-304-00 I-306-00 I-307-00

22

900 transome nozzl

I-317-00

I-114-00

I-115-00

I-307-00 I-304-00 I-307-00 I-306-00 I-302-00

I-316-00 (2x) I-317-00 (2x)

Reducer 3” BSP/2,5” BSP Ball valve 2,5” BSP Hose connector 2,5” BSP Hose clamp 77-94mm Hose 3” BSP/ L=3.3 ft Pressure hose 2” (L=33ft Flexible )

I-308-00 I-309-00 I-310-00 I-331-00 I-312-00 I-113-00

Hose clamp 48-60mm Elbow 450 2” BSP M/F Hose connector Ball valve 2” BSP Nozzles

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

I-114-00 I-316-00 I-115-00 I-317-00 I-318-00


rubber I-329-00 ring I-327-00

BOAT OPERATING EQUIPMENT

10 reasons to choose for a Jet Thruster

nut I-326-00

1 Silent operation In contradiction to a conventional tunnel thruster the Jet Thruster operation is quite. The are no sounds from a cavitating propeller producing the annoying loud sound that are common with conventional tunnel thrusters.

2 No tunnel The nozzles or outlet are flanged thru hulls with a very small diameter. There is no need to drill large holes for installation of a tunnel with no Fiberglassing. The Jet Thruster can be installed in vessels that cannot fit a conventional bow, stern or retractable thruster with ease.

3 One system for maximum control Besides the Jet Thruster Single for bow and stern thrusting a dual(combi) system is available. The combi for bow and stern enables you maximum control for your boat. With the combi you will have full directional control for perfect docking in all weather conditions.

4 Stern-Jet Install a stern Thruster in conjuction with your existing bow thruster for addional docking control.

nozzle to be installed on stern e.g. below swimming platform. Holland Marine Parts

C-200-01

5 Draft If you have a shallow draft boat or little room to install then the Jet Thruster is your solution. The nozzles can be places only a few inches below the waterline.

6 Flexible installation The components of the system allow for many installation options making this system adaptable to fit in most any boat of any size.

7 Quality, simplicity and reliability With no vulnerable electronic parts and standard electrical installation techniques it can be serviced all over the world without any special tools or equipment. Components that contact (sea) water are made of a corrosion resistant material.

8 Applicability The Jet Thruster can be applied in many Motorboats, Sailboats, Barges, Workboats, Catermarans constisting of polyesther, wood, steel and aluminium construction.

9 Reduce drag Saving fuel while increasing speed Large tunnels cause resistance costing fuel and decreased speed. The Jet Thruster however works with very small outlet openings in bow and stern. Great for the sailboater looking for every knot out of there boat.

10 Installation The installation is easy and does not require special or special tools. Due to the ease of installion it can be installed in a fraction of the time of a conventional thruster. Reducing installation cost for the OEM, Marina or even the do-it-yourselfers Equipment Catalogue 2013/JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

23


BOAT OPERATING EQUIPMENT

Maximum control!

Wireless docking for your Vessel

Holland Marine Parts Jet Thrusters can be controlled with the dedicated Wireless Control Unit. Enabling you docking and maneuvering your vessel with maximum control! • Water resistant (IP65) • Industrial quality • Comfortable grip Complete kit contains: Transmitter, Receiver, Antenna + cable

Frequency 433 & 869 MHz , 1 channels Modulation type FM-Modulation Code comb. 16.777.216 Radio type PLL Synthesizer Output 7 mW (by 50 ohm) Buttons 2/4 x 1-step buttons No. of batteries 3 Batteries exchangable Type of batteries 1.5V AAA Weight ~ 120 gr / ~ 0.3 lb Dimensions ~ 66 x 113 x 35 mm / ~ 2.6 x 4.4 x 1.4 in Water resistant IP65

24

Frequency 433 & 869 MHz , 1 channels No. of function relays 4 Duplex No Power supply 12-24V DC & 230V AC & 115V AC & 24V AC Max current consumption 10-300 Dimensions ~ 133 x 120 x 45 mm / ~ 5.2 x 4.7 x 1.8 in Protection IP65 Radio type Double superheterodyne Sensitivity -100 dBm Bus system None Relay functionality Momentary, Latching, Interlocking Antenna 1 external BNC Temperature -20 to +55 C / -4 to +130 F 869 MHz: ASM= 12-24V AC, BSM= 230V AC Max. number of transmitters 40

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT OPERATING EQUIPMENT

AUTOPILOT PUMPSETS - REVERSING REVERSING PUMPSET Reversing Pumps are used when hydraulic steering is fitted on boats up to 65 feet L.O.A. (depending on rudder torque). The pumps are switched on by the automatic pilot and make a steering correction to left or right determined by the direction of rotation of the pump motor. The motors are of the permanent magnetic type and reversing direction is accomplished by reversing the motor input current. The pump has only three moving parts and requires no complicated check valves to prevent rudder movement when de-energized. Output flow is completely adjustable to 50% of rated flow allowing the pump output to be adjusted precisely to the volume of steering cylinder fitted. The pump is exceptionally reliable and delivers more than twice the hydraulic output per watt of input than gear pumps manufactured by competitors. Motors are heavy duty, a full 85 mm in diameter with long brushes and sealed ball bearings for long service life. The moulded rubber mounting foot can be rotated to allow the pump to be mounted on any surface. Supplied with three flexible hoses terminating in ¼ inch JIC swivel fittings which can be easily adapted to piping systems. A useful range of accessories can be used to enhance the pump by incorporating added valves and solid state FET switching.

Heavy Duty Ball Bearing Motor

Shut Off Valve (included)

Moulded Rubber Mounting Foot Flow Adjustment

Code

Optional Accessories: ▪▪ Solid state switch - CR-30 ▪▪ Shut off Valve - SV ▪▪ By-pass Valve - BP12V & BP24V ▪▪ Unbalanced Valve - UB

Description

OC-AF12121706

1.2 litre, 12 Volt Octopus Reversing Pump

OC-AF12241706HK

1.2 Litre, 24 Volt Octopus Reversing Pump

OC-AF20121706

2.0 Litre, 12 Volt Octopus Reversing Pumpset

OC-AF20241706

2.0 Litre, 24 Volt Octopus Reversing Pumpset

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

25


BOAT OPERATING EQUIPMENT

AUTOPILOT PUMPSETS - CONTINUOUS CONTINUOUS RUNNING PUMPSETS (MED) Octopus CRA Pumpsets are continuously running DC motor driven pumps used for autopilot drive service on larger yachts and commercial vessels. These pumpsets can be used on steering cylinders up to 60 cu.in. (1000 cc.) displacement. Hydraulic oil is cooled as it returns to the reservoir keeping the whole pump system cool during extended passages. Rudder control is achieved by energizing coils in a solenoid valve. As these coils draw only 12 watts it is possible to drive the pump directly from the autopilot with a 2.0 amp output.

Code

Description

General Description

Optional Accessories: OC-AFCRA0212 2 Litre, 12 Volt Constant Running Pumpset • PRESSURE GAUGE: A pressure gauge can be fitted OC-AFCRA0212F 2 Litre, 12 Volt Constant Running Pumpset c/w Flow Control to show steering pressures. Octopus CRA Pumpsets are continuously running D.C. motor driven pumps OC-AFCRA0224 2 Litre, 24 Volt Constant Running Pumpset • FLOW CONTROL (Model CRA02 only) which Flow Control are used for autopilot drive service on larger yachts and small commercial allows operator to adjust flow between 0.3 and 0.5 OC-AFCRA0324 3 Litre, 24 Volt Constant Running Pumpset vessels. These pumpsets can be used on steering cylinders up to 60 cu.in. (1000 gpm (1300 to 2000 cc/min) OC-AFCRA0412 4 Litre, 12 Volt Constant Running Pumpset cu.cm.) in volume. • PRESSURE RELIEF VALVE: Adjustable between 50 OC-AFCRA0424 4 Litre, 24 Volt Constant Running Pumpset to 900 psi (4 to 60 bar)

Unlike reversing pumps, which in sizes over 1/2 gallon/min (2000 cc/min) are rarely capable of delivering full steering pressure, these pumps deliver over 500 psi (35 bar) and are very economical in power consumption. Rudder control is achieved by energizing coils in a solenoid valve. As these coils CONTINUOUS RUNNING PUMPSETS (HEAVY) draw only 12 watts it is possible to drive the pump directly from the autopilot CONTINUOUS RUNNING PUMPSETS control without a power switch. This significantly reduces the cost of the Octopus CRB pumpsets are heavy duty continuous running D.C. or A.C. motor driven pumps which are used for autopilot service on larger pilot. yachts and commercial vessels. Theseautomatic pumpsets can be used on steering cylinders up to 200 cu. in. (3500 cu. cm.) in volume. All models are fitted with an adjustable pressure relief valve and pressure gauge. They can be supplied as a simple pump unit, a motor and reservoir combination to replace an engine driver pump or fitted with a direction solenoid valve. Adjustable flow control and dual speed options are also available. Electric motors are heavy duty ball bearing type. A mechanical seal is used between the motor and pump rather than the usual lip seal, this ensures a long service life without “grooving” the shaft. Reservoirs are large capacity to ensure cool running in all climates.

MODEL CRB Standard Features

Direction Control Valve

Filler Ports Vented Cover

1. LOWPressure POWER CONSUMPTION: Pumpsets typically draw under 150 Gauge Hydrolic Oil watts. Reservoir 2. WIDE VOLTAGE RANGE: 12 volt, 24 volt and 32 volt motors are Pressure Relief available. 3. WIDE Wiring FLOW RANGE: Units are available in 0.5 gpm, 0.75 gpm and 1.0 Penetration gpm (2000 cc/min, 3000 cc/min and 4000 cc/m) 4. COMPLETELY WATERPROOF CONSTRUCTION: The motor, solenoid valve, starting relay and terminal connections are all enclosed in a waterproof cover. Ample space makes wiring easy. Steering Port OFF VALVES 5. MANIFOLDED HYDRAULIC CONNECTION WITH SHUT Servicing this unit is easy as it can be disconnected from the steering Electrical system by closing three shut-off valves and removing the pump without Motor draining the steering system. 6. RUNNING INDICATOR LAMP: A running indicator lamp shows the motor is running. The lamp also indicates correct motor polarity.

Optional Accessories: • FLOW CONTROL – An adjustable flow GENERAL DESCRIPTION Code Description control can adjust flow to approx 50% of rated flow. • TWO SPEED – An adjustable second lower speed OC-AFCRB0224BST 2 Litre, 24 Volt HD running Pumpset, D.C. Singleor speed, Tank Octopus CRB pumpsets are heavy duty continuous A.C. Short motor driven pumps option can be fitted. With this option the pump runs which are usedOC-AFCRB03121 for autopilot service on larger yachts and commercial vessels. These 3 Litre, 12 Volt HD Pumpset, single speed normally in lower speed, higher speed is engaged

pumpsets can be used on steering cylinders up to 200 cu. in. (3500 cu. cm.) in volume. by energizing an auxiliary selonoid valve. This is OC-AFCRB03242 3 Litre, 24 Volt HD Constant Running Pumpset w/flow control useful for hand jog applications were fast response All models are fitted with an adjustable pressure valve Running and pressure OC-AFCRB042424B 4 Litre, 24 Volt relief HD Constant Pumpsetgauge. w/flow They controlcan is desirable. be supplied as a simple pump unit, a motor and reservoir combination to replace an engine 13 litressolenoid are available. driver pump orNote: fittedSizes withup a to direction valve. Adjustable flow control and dual speed options are also available.

26

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited

Electric motors are heavy duty bearing type. A mechanical seal/ is used between the Phone 09 ball 448 5900 / Fax 09 448 5911 / info@sopac.co.nz www.sopac.co.nz motor and pump rather than the usual lip seal, this ensures a long service life without “grooving” the shaft. Reservoirs are large capacity to ensure cool running in all climates.


BOAT OPERATING EQUIPMENT

MECHANICAL AUTOPILOT DRIVES HYDRAULIC

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

27


B O A T O P E R6/1/12 A T I 13:18 N G Page E Q 8U I P M E N T

ble Steering Brochure US imp

Type S/T mechanical dashboard drive UNIQUE AUTOPILOT DRIVES FOR CABLE STEERED BOATS PROFESSIONAL SOLUTION - Replaces manual helm with a manual helm/autopilot drive combination. TYPE S BEHIND DASH DRIVE TYPE T TILT BEHIND DASH DRIVE

totally out of sight!!!

28

4

www.octopusmarine.ca www.octopuseurope.com 8

Equipment Catalogue 2013 /JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT OPERATING EQUIPMENT

Type R mechanical remote drive - outboard systems SUITABLE FOR MOST YAMAHA, MERCURY MARINER & SUZUKI ENGINES INNOVATIVE DESIGN Fitting an autopilot to outboard engined boats used to be a major problem, but not any more. The Type R Remote Drive can be located in a convenient location away from the exposed outboard engine and the optional integrated rudder feedback unit solves the often difficult problem of attaching a feedback unit to the complicated outboard engine geometry.

EASY TO FIT The remote drive attaches to the outboard engine via a second steering cable (6ft/1.8m cable included longer cables are available as separate accessories). The installation kit supplied fixes to the steering cylinder using existing fittings - no additional holes need to be drilled.

OUTBOARD PACK ORDER CODES MDRESYS-C

Yamaha 115-220HP 1984 onwards

MDRESYS-D

Mercury Black Max 1980 onwards, Mariner 1980 onwards, Mercury/Mariner 2.4 (all models), Suzuki DT75–DT225, Suzuki DF60–DF140

REMOTE DRIVE DIMENSIONS

SECOND CABLE LENGTH CALCULATION All Type R packs are supplied with a 6ft (1.8m) steering cable. If this is not suitable then other lengths are available as separate accessories. Use a length of rope or cable to plan the steering cable route and then measure the total length required:

(‘A’ Dimension + ‘B’ Dimension) – 4in for a 90º bend Round up the result to the nearest foot. See below for cable order codes. 8in (200mm)

on

on

si en

im

‘B’

’D ‘A

nsi

e Dim

ke ro st id

M 6in (150mm) minimum radius

6in (150mm)

6in (150mm)

ACCESSORIES RUDDER FEEDBACK MODULES

OC15SUK15A Installation Kit – Yamaha 115-220 OC15SUK15B Installation Kit – Mercury-Mariner-Suzuki OC15109-6 OC15109-9 OC15109-12

Standard Steering Cable x 6ft Standard Steering Cable x 9ft Standard Steering Cable x 12ft

OPTIONAL RUDDER FEEDBACK UNIT One of the most complex and time-consuming aspects of autopilot installation is fitting the rudder feedback unit, ensuring that the geometry matches the full range of rudder movement. The Octopus rudder feedback unit solves these problems as it mounts directly to the drive unit itself.

9

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

OC15SUK27

Universal Model for all autopilots

OC15SUK27A OC15SUK27B OC15SUK27D OC15SUK27E

For Comnav & Sitex Autopilots For Raymarine Autopilots For Coursemaster & Simrad Autopilots For Garmin, Furuno, Navman & TMQ Autopilots

OC15SUK83

Simrad Resistance to Frequency Conversion Kit – Required for Simrad Autopilots

www.octopusmarine.ca www.octopuseurope.com 29


B O A T O P E R6/1/12 ATIN G E Q 12 UIPMENT 13:18 Page

ble Steering Brochure US imp

Type R mechanical remote drive - sterndrive systems UNIQUE PILOT DRIVE FOR STERNDRIVE APPLICATIONS LOW COST SOLUTION - No need to change to hydraulic steering EASY TO FIT - Simple to install kits TIME SAVING - Rudder feedback option mounts directly on drive SAFE - Manual override without disengaging the autopilot COMPATIBLE WITH ALL MAJOR AUTOPILOT BRAND ELECTRONICS

Optional Rudder Feedback Unit

STERNDRIVE ENGINE

simple solutions

for difficult installations

30

6

www.octopusmarine.ca www.octopuseurope.com 12

Equipment Catalogue 2013 /JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT OPERATING EQUIPMENT

Type R mechanical remote drive - sterndrive systems SUITABLE FOR MOST MERCRUISER AND VOLVO PENTA SYSTEMS STRAIGHTFORWARD INSTALLATION The Type R Remote Drive System makes sterndrive installations easy for both single or dual engine systems. The installation kit simply clamps to the steering cylinder with no drilling or cutting required. Two packs are available to suit the most common Mercruiser and Volvo-Penta sterndrive systems.

CURRENT MERCRUISER ENGINES, AND NORTH AMERICAN BUILT VOLVO PENTA GAS & DIESEL ENGINES SINGLE ENGINE SYSTEM A

DUAL ENGINE SYSTEM A

Order MDRESYS-A

Order MDRESYS-A plus 9ft Cable (Fits most applications)

Remote Drive Unit

Remote Drive Unit

Drive Cable

Installation Kit

Drive Cable (9ft)

Installation Kit

ALL EUROPEAN BUILT VOLVO PENTA DIESEL ENGINES SINGLE ENGINE SYSTEM B

DUAL ENGINE SYSTEM B

Order MDRESYS-B

Order MDRESYS-B

Remote Drive Unit

Remote Drive Unit

Installation Kit

Drive Cable

Installation Kit

Drive Cable

ACCESSORIES RUDDER FEEDBACK MODULES

OC15SUK12B Sterndrive Installation Kit for Mercruiser engines (from 1994) & Volvo Gas engines OC15SUK12C Sterndrive Installation Kit for Volvo Diesel engines OC15109-6 OC15109-9 OC15109-12

Standard Steering Cable x 6 foot long Standard Steering Cable x 9 foot long (recommended for System A dual engine installation) Standard Steering Cable x 12 foot long

OPTIONAL RUDDER FEEDBACK UNIT One of the most complex and time-consuming aspects of autopilot installation is fitting the rudder feedback unit, ensuring that the geometry matches the full range of rudder movement. The Octopus rudder feedback unit solves these problems as it mounts directly to the drive unit itself.

OC15SUK27

Universal Model for all autopilots

OC15SUK27A OC15SUK27B OC15SUK27D OC15SUK27E

For Comnav & Sitex Autopilots For Raymarine Autopilots For Coursemaster & Simrad Autopilots For Garmin, Furuno, Navman & TMQ Autopilots

OC15SUK83

Simrad Resistance to Frequency Conversion Kit – Required for Simrad Autopilots

NOTES • For older Mercruiser engines (pre-94) use System B (MDRESYS-B) • Normal steering cables can also be used as supplied by Teleflex, Uflex and Multiflex

7

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

www.octopusmarine.ca www.octopuseurope.com 31


10 I P M E N T B O A T O P E R6/1/12 A T I N13:18 G EPage QU

able Steering Brochure US imp

Type R mechanical remote drive - outboard systems SIMPLE SOLUTION FOR TRICKY INSTALLATIONS

Rudder Feedback Unit

EASY TO FIT - Installation kit bolts to existing steering system, no drilling required! TIME SAVING - Rudder feedback option mounts directly on drive COMPATIBLE WITH ALL MAJOR AUTOPILOT BRAND ELECTRONICS

outboard engine?

no problem!

32

8

www.octopusmarine.ca www.octopuseurope.com 10

Equipment Catalogue 2013 /JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT OPERATING EQUIPMENT

Type S/T mechanical dashboard drive specification PROFESSIONAL SOLUTIONS FOR STERNDRIVE & OUTBOARD ENGINES TYPE S BEHIND DASH DRIVE

TYPE T TILT BEHIND DASH DRIVE

The Straight shaft drive unit replaces the manual drive used on cable steered boats and is mounted directly behind the dash. The drive is directly compatible with the Morse 290 steering helm but comes with its own bezel kit and can be retrofitted in most installations using the cable and steering wheel from the manual steering helm on the boat.

This drive unit replaces a manual Tilt drive and is mounted directly behind the dash, but still allows the angle of the steering wheel to be changed. It uses the front end from Teleflex SH91800 (not supplied).

SPACE REQUIRED - TYPE S & TYPE T TOP VIEW

SIDE VIEW

DASHBOARD MIN 250mm (10in) clearance front-back (216mm / 8.5in with spacers) MIN 90mm (3.5in) clearance

MIN 150mm (10in) clearance

MIN 115mm (4.5in) clearance

ACCESSORIES OC15SUK10

OPTIONAL RUDDER FEEDBACK UNIT

90 degree Bezel Mounting Kit for Type S Straight Shaft Drive

One of the most complex and time-consuming aspects of autopilot installation is fitting the rudder feedback unit, ensuring that the geometry matches the full range of rudder movement. The Octopus rudder feedback unit solves these problems as it mounts directly to the drive unit itself.

OC15SUK09 20 degree Bezel Mounting Kit for Type S Straight Shaft Drive OC15SUK07 Steering Cable Adapter Kit for TFX SSC72, Uflex M47, Morse 304415

RUDDER FEEDBACK MODULES OC15SUK27

Universal Model for all autopilots

OC15SUK08 Steering Cable Adapter Kit for TFX SSC62, Uflex M66 OC15SUK11

Adjustable Friction Brake for Type S Straight Shaft Drive with 90º Bezel Kit

OC15SUK27A OC15SUK27B OC15SUK27D OC15SUK27E

OC15SUK16 OC15SUK17 OC15SUK18

Spacer Kit x 19mm for 90º Bezel Kit Spacer Kit x 16mm for 20º Bezel Kit Spacer Kit x 13mm for TFX Performance Tilt Mechanism (Type T)

For Comnav & Sitex Autopilots For Raymarine Autopilots For Coursemaster & Simrad Autopilots For Garmin, Furuno, Navman & TMQ Autopilots

OC15SUK83

Simrad Resistance to Frequency Conversion Kit – Required for Simrad Autopilots

5

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

www.octopusmarine.ca www.octopuseurope.com 33


B O A T O P E R6/1/12 A T I N13:18 G EPage QU IPMENT 6

able Steering Brochure US imp

Type R mechanical remote drive - inboard systems COMPACT AND CONVENIENT SOLUTION

ALSO SUITABLE FOR SAIL BOATS!

DISCREET INSTALLATION - All components mounted out of sight EASY TO FIT - Can be located in very small spaces PERFORMANCE - Responsive drive, little feedback resistance in Standby Mode IDEAL FOR INBOARD ENGINED BOATS UP TO 32ft (10m) - 13,200lbs (6,000kg)

flexible installation,

compact design

34

www.octopusmarine.ca www.octopuseurope.com 6

Equipment Catalogue 2013 /JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

10

A


BOAT OPERATING EQUIPMENT

AUTOPILOT DRIVE UNITS • A range of solutions for outboard, inboard or sterndrive boats • Makes difficult cable-steering installations simple • No need to convert the boat to hydraulic steering • Ideal for modern boats with limited below deck space • All drives are completely hidden, no electronics exposed to the elements • Compatible with all major brand autopilot systems TYPE S BEHIND DASH DRIVE The innovative Type S drive unit replaces the existing manual cable helm unit with a combined manual helm and autopilot drive unit. Because it is mounted behind the dash it is completely hidden for a professional-looking installation. SEE PAGES 4 & 5

TYPE T TILT BEHIND DASH DRIVE The Type T drive unit is for boats that require a behind-dash drive system but are currently fitted with tilt steering - this unit offers all the features of the Type S drive, while still allowing the tilt angle of the steering wheel to be adjusted. SEE PAGES 4 & 5

TYPE R REMOTE DRIVE The Type R remote drive offers a complete package solution for outboard, inboard and sterndrive engined powerboats with cable steering. The easy to fit packs contain everything you need to install the drive unit including steering cable, drive and fitting kit. SEE PAGES 6 - 10

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

3

www.octopusmarine.ca 35 www.octopuseurope.com


hydraulically driven products, which are uniquely The compact, rugged design of the APU B Oensures A T reliability O P E Rwith AT ING E Q U I P Mdesigned E N T to improve comfort and control for robust, corroboaters around the world. sion-resistent operation. And, as with all WESMAR products, the APU is built of  Operates with a helm-mounted safety key lock. the most durable materials and powder coated to ensure a long life.

AUXILIARY PROPULSION UNIT

AUXILIARY PROPULSION UNIT (APU) WESMAR’s Auxiliary Propulsion Units come in two sizes the APU Complete control fromreliable the helm Model 200 and the APU Model 300. They offer an instant, using of state-of-the-art electronics. The WESMAR alternative source power with minimal maintenance. PoweredAPU by your vessel’s generator or stand-alone engine, systems can be operated right from thethebridge APU allows fuel efficient, continuous the ability by simply turning the key operation, and usinggiving the proportional to bring thejoystick boat to port the eventand of mechanical failure, and forinforward aft propulsion. Once the the ability to quietly cruise without the use of the main engine. system is engaged with the key lock at the helm, the Simplicity and practicality are the focus of this ‘get-home’ system.

system is activated and you are immedialy in control

• Provides continuous propulsion in the event of a main engine failure. and Nomanoeuvring, need to visit engine room at all. • Low shiftunderway. RPM for trolling, and the sight-seeing. CUSTOMER REPORT • Quiet operation for late night and early morning departures resulting in minimal disturbances to guests and neighbours. ‘Get Home System’ • Quiet trolling speeds for fishing.Sea Trials At an Impressive Knots • The APU can be a dedicated 4.5 hydraulic unit, and also fits perfectly with WESMAR’s other hydraulically driven products, which are uniquely The elegant yacht was built in China by Hershine The peace of mind offered by a ‘Get Home’ system has designed andthecontrol users around the world. Marine and WESMARfor APU, along with WESMAR been well documented. Boat owners liketotoimprove know they comfort APU Automatically from the Helm Central Hydraulics and StabilizerEngages have backup should they lose their engine. WESMAR’s • Operates with aThe helm-mounted safety key lock.Systems were installed

WESMAR APU systems can be operated from the bridge byThe simplyAPU turning the key and using the joystick. No need to Automatically Engages visit the engine room at all.

Standard System and Options    

 Hydraulic Motor Shaft Coupling Arrangement  On-Off Key Lock  Helm Control Friction Joystick for Forward60’and Aft Propulsion. Sparkman & Stephens 

at the factory. Adding the APU only involved an new APU Auxiliary Propulsion System,* popularly additional valve referred to as a on the Central ‘get home’ system Hydraulics. uses hydraulic power from the The beauty of vessel’s generator WESMAR’s new to drive the APU is that it can propeller shaft, to be operated right Helm control get you home. from the bridge The compact, by simply turning rugged design the key and using In Standby of the APU has the proportional Engaged and ready for operation caught the eye of joystick for customers around forward and aft Standardize on WESMAR the world. propulsion. Once WESMAR brings over four decades of design and manufacturing to the marine industry, providing equipment to A story reached the WESMAR’s system network is of support includes over 350 commercial, private and government operations around the world. trained service personnel, dealers and distributors who are dedicated to customer support. The APU systems join a us recently from engaged with the wide range of roll fin stabilizers, hydraulics systems and rugged bow and stern thrusters. our Technical key lock at the Team Specialist in helm the system is China, David Yen, This beautiful Queenship Passagemaker 60, built in China, will make its debut into WESMAR’s activatedalland you the US in February with a cruising package that includes a WESMAR ‘get home’ stainless who reported an are steel immediately WESMAR’s Roll APU system, WESMAR Central Hydraulics, and WESMAR Roll Fin Stabilizers. bow and stern fin stabilizers are amazing 4.5 knot Recent sea trials clocked the ‘get home’ system at 4.5 knots. in control and thrusters the choice of boatspeed during sea underway. lead the idustry ers around the world in rugged reli- as well, trials of the WESMAR APU, Central Hydraulics and Roll It is highlylooking desirable for many uses for comfort and other ability. They are control while cruising. Fin Stabilizers on a 60-foot Queenship Passagemaker such as maneuvering while sight-seeing with little cost Wesmar’s unique lightning the solution to yacht. in fuel, quiet operation for late night and early morning fast gyro samples vessel roll docking in crowded narrow slips and Yen reported that using a hydraulic pump powered by departures, quiet trolling speedsmarinas, for fishing. 1000and times per second. congested waterways. a 20KW Genset, the APU achieved a boat speed of 4.5 What has not been widely reported is that the speed knots. The boat, recently commissioned, is currently on provided is impressive as well. In addition to backMarine up WESMAR Western Electronics (425) 481-2296 -toFax: (425) 486-0909 its way to the West Coast of the U.S. and will be delivered safety, imagine the fuel savings inTelephone: using the generator E-mail: cjones@wesmar.com or bsentz@wesmar.com...www.wesmar.com to its new owner in February. propel the boat when high speed is not necessary.

APU Drives

Engage & Standby LEDs WESMAR Hydraulic Reservoir (Optional) Hydraulic Pump (Optional) In Standby

In Standby

Engaged and ready for

Engaged and ready for

Standardize on WESMAR operation

WESMAR brings over four decades of design and manufacturing to the marine industry, providi commercial, private and government operations around the world. WESMAR’s network of suppo trained service personnel, dealers and distributors who are dedicated to customer support. The AP wide range of roll fin stabilizers, hydraulics systems and rugged bow and stern thrusters.

WESMAR’s Roll fin stabilizers are the choice of boaters around the world looking for comfort and control while cruising. Wesmar’s unique lightning fast gyro samples vessel roll 1000 times per second.

PRODUCT WARRANTY Commercial warranty and consumer limited warranty, disclaimer, and remedies. Seller warrants title, materials, and workmanship on equipment, except components manufactured by others for which seller assigns, as permitted, the original manufacturer’s warranty. Seller’s warranty period for all applicable express or implied warranties shall be ninety (90) days after installation or one (1) year after date of shipment to the original buyer, whichever time period expires first. Nonconforming to seller during the applicable warranty period and APU equipment Patent #reported US6558209 returned to seller at buyer’s expense and risk shall be repaired, or replaced at seller’s option. If seller is unable or unwilling to repair or replace such reported and returned nonconforming equipment within a reasonable time, then buyer shall be entitled to a refund of the purchase price of the equipment as buyer’s sole remedy. This paragraph sets forth buyer’s exclusive remedies for nonconforming goods. This commercial warranty and consumer limited warranty is in lieu of all other warranties, express or implied, including design, course of dealing, merchantability, fitness for a particular purpose. NOTE: LIMITATION OF SELLER’S COMMERCIAL AND CONSUMER LIABILITY. Seller shall not NE 200th Street, Boxand Woodinville, 98072-4001 USAor for any other incidental or consequential damages, regardless of the basis be7201, liable on any claim for loss of WA use, revenue, or profit, for injury, for /buyer’s claim(s), including, but not limited to, the /law of contract, warranty, or tort. In no case shall seller’s liability on any claim(s) exceed / Fax: (425) 486-0909 Email: bsentz@wesmar.com Web: www.wesmar.com the amount paid to seller for the purchased goods.

WESTERN MARINE ELECTRONICS

14120 Phone: (425) 481-2296

Helm cont

Hydraulic Proportional Valve (Optional)

Queenship Passagemaker 60 has the WESMAR ‘get home’ APU system. Recent sea trials clocked the ‘get home’ system at 4.5 knots.

APU System Design

from the

WESMAR’s all stainless steel bow and stern thrusters lead the idustry in rugged reliability. They are the solution to docking in crowded marinas, narrow slips and congested waterways.

WESMAR Western Marine Elec

Telephone: (425) 481-2296 - Fax: (425) 486 E-mail: cjones@wesmar.com or bsentz@wesmar.com...

PRODUCT WARRANTY Commercial warranty and consumer limited warranty, disclaimer, and remedies. Seller warrants title, materials, ment, except components manufactured by others for which seller assigns, as permitted, the original manufactur ranty period for all applicable express or implied warranties shall be ninety (90) days after installation or one (1) y the original buyer, whichever time period expires first. Nonconforming equipment reported to seller during the ap returned to seller at buyer’s expense and risk shall be repaired, or replaced at seller’s option. If seller is unable or u such reported and returned nonconforming equipment within a reasonable time, then buyer shall be entitled to a re the equipment as buyer’s sole remedy. This paragraph sets forth buyer’s exclusive remedies for nonconforming g ranty and consumer limited warranty is in lieu of all other warranties, express or implied, including design, course and fitness for a particular purpose. NOTE: LIMITATION OF SELLER’S COMMERCIAL AND CONSUMER L be liable on any claim for loss of use, revenue, or profit, for injury, or for any other incidental or consequential dam for buyer’s claim(s), including, but not limited to, the law of contract, warranty, or tort. In no case shall seller’s liab the amount paid to seller for the purchased goods.

Two APU Models* APU Model 200 APU Model 300

36

Maximum HP Rating Maximum Propellor Shaft Diameter Maximum HP Rating Maximum Propellor Shaft Diameter

25HP/19kW 2.38 inches/60.45mm 100/75kW 3.38 inches/85.85mm

MORE INFORMATION WESMARmake PRODUCTS IS AVAILABLE ON REQUEST *For a no-obligation quote, sendABOUT transmission and model, shaft diameter, generator KW rating, PTO size, prop diameter and pitch to cjones@wesmar.com. Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

APU Patent # US6558209


s

ol

0909 om

DC Pro ThrusTer series

vessels including:

R oll F in S tabilizeRS

B OWESMAR’s A T Ocutting-edge P E R ArollT IfinN G E Q U I P M E N T stabilizers vastly improve vessel

handling and safety, save fuel, and provide exceptional comfort for passengers and crew. WESMAR’s stabilizers electronically adjust to correct up to 90% of the rolls, resulting in more efficient and relaxed traveling.

BOWWESMAR & STERN THRUSTERS Thrusters

auxiliaRy PRoPulSion unit

imPoRtant advantageS oF

Extremely efficient electric motors eliminate the possibility of early thermal shutdown

DC PRO THRUSTER SERIES

For an instant, reliable, and alternative source of power with minimal Fully proportional control for safe maintenance, WESMAR offers its and gentle docking; or full power Auxiliary Propulsion Unit (APU’s). if the conditions dictate Important Advantages of WESMAR Thrusters The APU system provides continuous propulsion when quiet slow speed travel is Durable stainless steel gearbox and desired or• inExtremely the event efficient of a mainelectric engine motors failure. eliminatepropellers resistant to electrolysis the

anchoR Wpossibility indlaSS of early thermal shutdown WESMAR’s stainless steel anchor

Counter rotating dual propellers

• Fully proportional control for safe and gentleprovides docking; up or to 40 percent more windlass is uniquely designed with thrust with the same input power electronically driven magnetic fullanpower if the conditions dictate Easy retrofit drop-in installation for chain counter that is imbedded in • Durable stainless gearboxand and propellers resistant existing thruster tunnels the housing. Low steel maintenance to electrolysis reliable operation of all stainless steel hardware High quality AGMA 9 matched are the primary objectives behind WESMAR’s • Counter rotating dual propellers provides upand to 40 lapped spiral bevel gears for anchor windlass. quiet operation. percent more thrust with the same input power FiSh detection, navigation and SecuRity SonaR Proportional motor and control • Easy retrofit wide drop-in installation for existing thruster WESMAR’s range of precision searchlight sonar, designed for upgrades available for WESMAR’s tunnels yachts and sport fishing boats, gives conventional • High 9 matched and lapped spiral bevel on/off DC Systems. 360quality degreesAGMA of detailed information beneath andgears around vessel. WESMAR’s high forthe quiet operation. tech sonar is a must for every vessel on the open • Proportional motor and control upgrades available for water for unequaled fish detection, navigation, and safe travel. WESMAR’s conventional on/off DC Systems. WESMAR PRoducES ThRuSTERS uP To 600hP

aimer, and remedies. Seller warrants title, materials, and workmanship rs for which seller assigns, as permitted, the original manufacturer’s s or implied warranties shall be ninety (90) days after installation or ichever time period expires first. Nonconforming equipment reported d to seller at buyer’s expense and risk shall be repaired, or replaced at place such reported and returned nonconforming equipment within of the purchase price of the equipment as buyer’s sole remedy. This onforming goods. This commercial warranty and consumer limited ed, including design, course of dealing, merchantability, and fitness

ONSUMER LIABILITY. Seller shall not be liable on any claim for loss ental or consequential damages, regardless of the basis for buyer’s t, warranty, or tort. In no case shall seller’s liability on any claim(s) s. 2/2009

e drop-in wer, Side

ers

WESMAR Standard DC Pro

Stainless Steel Thrusters For Vessels 30 to 60 Feet

Counter Rotating Dual Propellers with No Thermal Shutdown and Proportional Control

Proportional Systems continuouS oPeRation and PRoPoRtional contRol WESMAR’s proportional DC electric thrusters provide the advantages of continuous operation and proportional control available in hydraulic systems. This allows the operator to apply the appropriate thrust for the docking operation without the worry of thermal shutdown of conventional DC systems.

V2-8 NS

V2-10-48/13 or V2-12-48/13

V2-12-48/23

24 or 48 VDC Proportional Tunnel Size: 8 in 24 VDC 6 HP Brushless 48 VDC 13 HP

Tunnel Size: 10 or 12 in 48 VDC 13 HP

Tunnel Size: 12 in 48 VDC 23 HP

For New Installation and WESMAR Standard Retrofits V2-8 NS

V2-12-48/13

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

V2-12-48/23

37


BOAT OPERATING EQUIPMENT

BOW & STERN THRUSTERS Retrofits: Designed for Easy Mount

WES

to Fit Existing Metric Sized Tunnels

Propo

eaSy RetRoFit

continu

Upgrading your vessel has never been easier. WESMAR’s two bolt design allows for a simple drop-in installation on existing metric sized tunnels. Both the V2-7 and V2-10 M Models replace Max Power, Side Power, and Vetus Thrusters.

WESMAR proportion for the do

V2-10 M

V2-7 M 24 or 48 VDC Proportional Tunnel Size: 185 mm 24 VDC 6 HP Brushless 48 VDC 13 HP

48 VDC Proportional Tunnel Size: 250 mm 48 VDC 13 HP

V2

24 or 48 V Tunne 24 VDC 6 48 V

WESMAR Stern Thruster Tunnels W WESMAR Stern Thruster TunnelsWES

Available for the V2-7 M and V2-12 M M In add In Available for the V2-7 M and V2-12

WESMAR Stern Thruster Tunnels Available for the V2-7 M and V2-12 M

thrust th WESMA

oth In of additio of vessel thrusters ve of other vessels R ollin

R

R oll F i

correct co

For Replacement of Existing Old Technology Thrusters WESMAR Quality ProductsFor Ne WESMAR Stern Thruster Tunnels Available for V2-7 the V2-7 M M and V2-12 M

efficien correct up eff efficient an auxil

a In addition to powerful and long a lasting uxiliaRy V2 V2-10 M thrusters, WESMAR offers a wide range of other rugged and reliable products for vessels including: propul propulsion Bow & Stern Thruster Controls Bow &&Stern Thruster Controls pr Bow Stern Thruster Controls

desired or desired

de Up6 toproportional 6 proportional control stations stations can Up R to control can can oll Fproportional in S tabilizeRS Up to 6 control stations a nchoR be provided. WESMAR’s cutting-edge roll anch be provided. fin a be provided.

stabilizers vastly improve vesse handling and safety, save fuel, and provide exceptional comfort fo passengers and crew. WESMAR’s reliable op arereliable the to p stabilizers electronically adjust rel anchor win the correct up to 90% of the rolls, resulting inare more are anchor FiSh dete efficient and relaxed traveling. Single Control Bow/Stern Control an

FiShF d Single Control Bow/Stern Single Control Bow/Stern Control auxiliaRy PRoPulSion unit Control

38 Bow & Stern Thruster

For an instant, reliable, and alterna an tive source of power with beneath minima tech sonar maintenance, WESMAR offers its water for u beneat Auxiliary (APU’s) be travel WESMAR Western Marine Propulsion Electronics Unit safe tech so APU system provides tec Telephone: (425)The 481-2296 Fax: (425) 486-0909continuous water fo WESMA E-mail: bsentz@wesmar.com  www.wesmar.com wa propulsion when quiet slow speed travel is Controls Equipment Catalogue 2013 /JAN Marine / © So-Pac Marine Limited safe tra WESMAR Western Electronics saf PRODUCT WARRANTY WESMAR Western Marine Electronics Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz desired or in the event of a(425) main engine Commercial warranty and consumer warranty, disclaimer, andfailure. remedies. S Telephone: (425) 481-2296  limited Fax: 486-0909

Up to 6 proportional control stations can

on equipment, except by others for whichWESM seller ass Telephone: (425)components 481-2296manufactured  Fax: (425) 486-0909 warranty. Seller’s warranty period for applicable express or implied warrantie E-mail: bsentz@wesmar.com  allwww.wesmar.com W E-mail:  www.wesmar.com one (1) yearbsentz@wesmar.com after date of shipment to the original buyer, whichever time period ex


BOAT OPERATING EQUIPMENT

SO-PAC MARINE, STEERING SPECIALISTS So-Pac Marine has supplied hydraulic and mechanical steering systems to the NZ Marine industry since the late 1980s. We’ve had input into the design/specification and provided steering solutions for super yachts, launches, yachts, ferries and production boats. We are leaders because of the range of systems and the volume we supply. We stock steering solutions for all craft up to 25 m LOA requiring rudder torque up to 1300 kgm; backed by our knowledge to ensure that your steering requirements are specifically met, even in extreme offshore conditions. In a nutshell So-Pac can be relied on because: • We usually can deliver ex stock steering packages for boats up to 25 metres LOA requiring rudder torque up to 1300 kgm. • Our range of hydraulic and mechanical steering solutions is probably the most comprehensive available from a single company in Australasia. • We have the experience, having had input into designing, specifying and supplying since the late 1980s Since 2000, we have supplied and commissioned over 30 steering systems on pleasure and commercial craft projects between 25rand 60 metres e in New Zealand. The above surely permits us to claim the title “Steering Specialists”. lind

Cy A 1 5 0 m u in e r i e s m u S Al

Note that the following four brands are a selection of our range. 09/01

ring t & Stee05/02 h c Ya raft Commercial Steering all C Sm sure Yacht & a h Steering itCommercial Ple -7 01 09/

Jastram Engineering Ltd. was established in 1989 for the sole purpose of commercially rated steering systems to the marine industry. The main office is located in North Vancouver , Canada.

Helm PumpAutopilot Interface w H60/H90/H110 API 180 ned ts

0 -15 Reliable operation of a steering system odel A desig l craf d m was tiona este e depends upon the quality and performance Th nder crea ally t The nedAPI 180 is a stand-alone solenoid of the helm pump. The Jastram "H" series Cyli ller re dividu d desigoperated ice hydraulic manifold. This allows a erv n smmade manually operated helm is a precision d. I tory an able sforsthe interface of electric steering in m controls to hydraulic steering systems. e c d a n id f in axial piston pump specifically designed tothe rov The manifold is equipped with a single epe Jastram Engineering designs and manufactures digital and hydraulic steering systems, he API4-way at rate.ng d der p h tspeed operate effectively at a very slow turning directional solenoid valve, lo ylin it at r 12/03 w o f C sels alirelief ty valve. The API 180 is suitable for an s th H60, 90manual and 110 are among the A steering controls and motor starters with alarms forThe simple steering tolargest digitally oat qu input the ves ve of up to 12 gpm and an hat flowharate t" b helm pumps made and provide excellent small type of uct tadjustable je s " output flow rate of up to 3 gpm. r 02/04 controlled twin independent with DPS interface. Systems carefully to ame prod perato ller primary orare backup steering matched for large steering ma s tram al o er s i . as ensure long life and exceptional performance in allsystems operating conditions. Cylinders ste Jare erc xpect. an be end o m t Commercial Steering Rudder Angle Indicator od r c orFeatures com e to e lindeDesign ned el r e ig t s le s m y ABS approved and Jastram will cooperate with all approval societies. e er co A C ss 3300ally d e sRAI sing• Anodized sel.body. thaluminum und inle Design Features The lled in linde• r Single eetspeed. sta rod cific e ve m r e g h a Angle y t e The Series 3300 PanoramicstRudder p o c in f s in and m le ion•s t Available lind gn Indicator provides an accurate asVDC and 110, 220 VAC. nt o in 12, 24, ltipyour w32 l cy - ali yste continuously updated indication rat ireme mu offig uand tee der • to Thecommunicate helm pump includes an external self id s rudder position. With three dial n qu further details With world wide representation and an in house ability in twenty-one ylin consult the technical manual MAN 00702. ed ss s rap eFor cplease ofaces r iz l le c e s t a three-color decal easy reading of the e e r in back mounted "lock valve."rudder This feature isolates u each helm oand d locks the rudder into ve ilita sta position is possible at many m e. torq no fac he languages, customers can be assured that any questionposition will be answered quickly. k by preventing unwanted feedback. viewing angles. An integral dimmer control 50-3 of t r to ith a stro e. enables the operator to adjust the lighting A-1 a 3”smooth ent dw nde li ie m • Thrust bearing support at both endslevel ofduring the day pump operation even anc f y heinsures to the desired orT night e v pli e c Lbs (Kg)rform Voltage operations. In conjunction with a power uirePart number mo res Description sim f th e h under a heavy load. u o t p t reqRAI ly t o supply (to be ordered separately) the a o nd ing (2.0) Fea 3300 can be used with standard RFU 300 JA-401051-11 sm greauto h e 12 VDC last4.4 180 pilot interface • Industry standard 1" diameter straight stainless steel steering wheel. ( gn for the API ishaft for g or RFU 2000 follow-up units. n is180 auto eac esJA-401051-12 24 VDC 4.4 (2.0) lon Lbs llowinterface ted at Installation cast is easy and requires only providing aDshielded llatioAPIcorrosion apilot • Pump housing is powder coated aluminum excellent le VDC a b t ls a s a JA-401051-13 API 180 auto pilot interface 32 4.4 . 3 conductor wire, 20 AWG between the wheelhouseIn and the rudder aunit. s. . (2.0) li c g follow-up e 1 e l n r s lo 0 i p d r protection. • bea JA-401051-14 API interface 110 VAC002 4.4 (2.0) ion180 auto ure are loa pilot Dis 3 frict light ens AN orts in Design Features ze lM ers Low tively leed p 6 t si nua wip For further details, please consult the technical manual MAN 00302.• r b a la o d r e m P r e • Three large and easy to read analog reading displays. ro l d a n n o li dimmer. y-in • Long-life LED backlit dial face for ease of reading, built nic 4.4 ist h C p c • Indicators functions as a “stand-alone”’ units. (RFU te ty Wagner Engineering Ltd is now owned • 300ill.or RFU 2000 2 uali f the or autopilot drive required). 10. PT hq r to • Maximum current draw (113mA / indicator). Part number Description Displ ¼ N PT Hig efe (Kg) rLbs by Jastram. Wagner Engineering is also • CE approved, IP54 protection to IEC 529 and EN 60529. e • N s ¼ in3/rev plea ion ils manufacturer of high quality Wagner eta ript • AC/DC power supply (110/220V, 50/60HZ input, DCroutput), o d esc stand-alone unit, complete with DIN rail. F D JA-301002-1 H60 helm pump (DC/DC power supply also available). 6.0 41.9 (19.0) Steering Products, a name that has earned r r JA-301002-3 H90 helm pump 9.0 umbe 41.9 (19.0) nde r cyli n a solid reputation throughout the marine t r JA-301002-2 H110 helm pump 11.0 41.9 (19.0) 50-3 ylinde Pa 1 c A 50-7 industry over the past sixty years. From hydraulic steering gears to control Part number Description -1 (Kg) A-1 1Lbs 100 1-2 3 systems, rudder angle indicators and accessories. 9 JB-801030 RAI 3300 indicator 3.3 (1.5) JA- 31001.0 JB-819003 RAI 3300 power supply (AC/DC) (0.5) 9 JA-

.

So-Pac stocks a wide range of spare parts for Wagner steering equipment, some of which has been in service for over 30 years.

Edson is a world leading manufacturer of yacht steering and accessories. Edson’s mechanical yacht steering systems (Sprocket & drive, sheaves and mounts) are used by luxury yachts and racing yachts throughout the world and are considered by many to be the world’s best. Edson began manufacturing steering systems and diaphragm pumps in 1879.

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

39


BOAT OPERATING EQUIPMENT

HEAVY DUTY CYLINDERS

Jastram Model B Steering Gear Jastram B Model Actuators are doubleacting equal displacement cylinders, which are directly connected to a tiller. When the B Model is actuated it moves the tiller, which in turn moves the rudder. The actuator sizing is primarily dependent on the maximum rudder torque required. Once the required rudder torque is known the appropriate actuator size can be selected. Calculating the rudder torque is complex. An incorrect calculation can result in failure of the steering system. Torque calculations should be confirmed by a naval architect or designer.

40

Equipment Catalogue 2013 /JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT OPERATING EQUIPMENT

Equipment Catalogue 2013/JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

41


BOAT OPERATING EQUIPMENT

42

Equipment Catalogue 2013 /JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT OPERATING EQUIPMENT

08/04

Brass Cylinder

Comparison Chart by Manufacturer Cylinder

Displ in3

Torque ft-lb

Cylinder

Displ in3

Torque ft-lb

12.1 17.6 23.1 30.5 39.2

710 1050 1360 1820 2330

B-150-9 B-200-9 B-200-9 B-200-12 B-300-9

13.1 23.9 23.9 31.9 52.4

800 1450 1450 1880 3110

11.0 14.6 20.2 26.9 32.3 43.8 70.1 93.4

650 870 1200 1600 1900 2600 4160 5550

B-150-7 B-150-9 B-200-7 B-200-9 B-200-12 B-300-9 B-300-12 B-300-16

10.2 13.1 18.6 23.9 31.9 52.4 69.9 93.3

620 800 1100 1450 1880 3110 4120 5550

7.7 12.2 19.1 30.2 6.0 49.0 77.3 100.3 7.8 14.7 19.6 33.0 41.5 53.6 94.0 126.0 152.5 203.8

450 720 1160 1820 355 2890 4550 5787 466 880 1170 1950 2440 3150 5480 7420 9100 12100

B-40-120 B-40-190 B-50-190 B-50-300 B-40-120 B-80-190 B-80-300 B-80-382 B-150-7 B-150-9 B-200-7 B-200-12 B-200-15 B-300-9 B-300-16 B-300-20

6.9 11.0 19.1 30.2 6.9 43.6 68.8 87.6 10.2 13.1 18.6 31.9 39.8 52.4 93.9 116.4

372 594 1160 1820 372 2573 4052 5144 620 800 1100 1880 2370 3110 5550 6930

HYNAUTIC

K1 K2 K3 K4 K8

1.5x9 1.75x9 2.0x9 2.0x12 2.5x9.5

KOBELT

7040-B7.5 7040-B10 7050-B7.5 7050-B10 7050-B12 7080-B7.5 7080-B12 7080-B16 WAGNER

N40-120 N40-190 N50-190 N50-300 N65 N80-190 N80-300 N80-382 N85 N175-750 N175-1000 N250-800 N250-1000 N250-1300 N350-1200 N350-1600 N400-1500 N400-2000

* * * * * * * *

( * see drop-in replacements) Equipment Catalogue 2013/JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

43


BOAT OPERATING EQUIPMENT

Photo courtesy of ChingFu Shipyard.

Jastram Model S Steering Gear The Jastram Model S Actuators are specifically certified for use in commercial marine hydraulic steering systems. Their rugged steel construction includes many standard features resulting from our long experience in the manufacture, operation and service of steering systems. Model S Actuators include features many manufacturers do not provide but are essential to a high quality, reliable steering gear for commercial marine application: • Micro-honed heavy wall cylinder barrel • Precision ground, chrome-plated piston rod • Oversize piston and piston rod bearings • Piston rod wiper • Tie-rod construction • Self-aligning spherical bearings • SAE outlet ports Type Approved Product; see details on back page

Engineered For Life At Sea

44

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

1.1 1.6 1.8 2.5 2.3 3.2 2.8 4.0 3.6 5.0 4.5 6.3 5.7 8.0 7.1 10.0 9.4 13.0 11.4 16.0 12.8 18.0 15.6 22.0 17.6 25.0 22.8 32.0 28.4 40.0 35.5 50.0 44.8 63.0 56.8 80.0 71.1 100.0

S2-11 S2-16 S2-18 S2-25 S2-23 S2-32 S2-28 S2-40 S2-36 S2-50 S2-45 S2-63 S2-57 S2-80 S2-71 S2-100 S2-94 S2-130 S2-114 S2-160 S2-128 S2-180 S2-156 S2-220 S2-176 S2-250 S2-228 S2-320 S2-284 S2-400 S2-355 S2-500 S2-448 S2-630 S2-568 S2-800 S2-711 S2-1000

8,130 11,450 12,737 17,931 16,441 23,146 20,469 28,787 25,699 36,165 32,259 45,351 41,084 57,864 51,391 72,330 67,629 94,029 82,239 115,728 92,583 130,194 113,052 159,126 127,301 180,825 164,551 231,456 205,418 289,321 256,989 361,651 323,894 455,680 411,124 578,641 513,906 723,301

LBF.FT.

45 35 45 35 45 35 45 35 45 35 45 35 45 35 45 35 45 35 45 35 45 35 45 35 45 35 45 35 45 35 45 35 45 35 45 35 45 35

S-1000-62*

S-1000-49*

S-1000-39*

S-1000-31*

S-800-38*

S-800-31*

S-800-24*

S-600-38*

S-600-31*

S-600-27*

S-500-32

S-500-25

S-500-20

S-400-24

S-400-19

S-400-15

S-400-12

S-300-17

S-300-11

STEERING ACTUATOR ANGLE MODEL

130 128 204 201 263 259 327 322 411 405 516 508 658 648 822 811 1,069 1,054 1,316 1,297 1,480 1,459 1,809 1,783 2,056 2,026 2,632 2,594 3,288 3,241 4,112 4,054 5,183 5,109 6,578 6,484 8,222 8,105

DISPL.

7.44 9.04 11.65 14.16 8.46 10.28 10.51 12.78 13.22 16.07 16.58 20.15 13.53 16.45 16.92 20.56 21.99 26.73 18.80 22.85 21.15 25.70 25.85 31.42 16.52 20.08 21.16 25.71 26.43 32.12 21.15 25.71 26.66 32.40 33.84 41.13 42.30 51.41

A

28.49 28.49 37.73 37.73 34.23 34.23 38.72 38.72 44.67 44.67 52.03 52.03 48.51 48.51 55.94 55.94 67.07 67.07 68.12 68.12 73.28 73.28 83.59 83.59 68.29 68.29 78.45 78.45 90.02 90.02 88.79 88.79 100.88 100.88 116.63 116.63 135.19 135.19

B

5.07 7.22 7.95 11.31 5.77 8.21 7.17 10.20 9.02 12.83 11.31 16.09 9.23 13.13 11.54 16.42 15.00 21.35 12.82 18.25 14.43 20.53 17.63 25.09 11.27 16.04 14.43 20.53 18.03 25.65 14.43 20.53 18.18 25.88 23.08 32.84 28.85 41.06

C

Dimensions A-M are all in inches ¹ Model S2 indicates 2 actuators are used. S4 indicates 4 actuators ² Other steering angles are also available ³ Other actuator stroke lengths are available upon request * These actuators require 6 tail mounting bolts (K on chart) All other actuators require 4 tail mounting bolts (K)

F

G

H J

7.50 8.00 16.00 13.00 5.75

6.25 6.25 12.00 10.25 4.50

4.56 5.06 8.50 7.00 3.63

3.69 3.88 7.00 5.75 2.63

3.06 3.06 5.50 4.63 2.19

E

1

¾

¾

ǫ

½

K (Bolt Dia) L 5.27 5.91 6.12 6.86 6.67 7.47 7.17 8.03 7.74 8.67 8.35 9.35 9.05 10.14 9.75 10.92 10.68 11.92 11.40 12.78 11.86 13.29 12.68 14.21 13.19 14.83 14.37 16.10 15.47 17.34 16.67 18.68 18.00 20.17 19.49 21.85 21.00 23.53

TWIN RUDDERS M L (Max Dia) 4.18 3.61 4.69 4.04 4.86 4.19 5.45 4.70 5.29 4.56 5.93 5.11 5.69 4.91 6.38 5.50 6.14 5.29 6.88 5.93 6.62 5.71 7.42 6.40 7.18 6.19 8.05 6.94 7.74 6.67 8.67 7.47 8.48 7.31 9.46 8.16 7.80 9.05 8.74 10.14 9.41 8.11 10.55 9.09 10.06 8.67 11.28 9.72 10.47 9.02 11.77 10.14 11.40 9.83 12.78 11.01 12.28 10.58 13.76 11.86 13.23 11.40 14.83 12.78 14.29 12.32 16.01 13.80 15.47 13.34 17.34 14.95 16.67 14.37 18.68 16.10 1.1 1.6 1.8 2.5 2.3 3.2 2.8 4.0 3.6 5.0 4.5 6.3 5.7 8.0 7.1 10.0 9.4 13.0 11.4 16.0 12.8 18.0 15.6 22.0 17.6 25.0 22.8 32.0 28.4 40.0 35.5 50.0 44.8 63.0 56.8 80.0 71.1 100.0

T.M. 8,130 11,450 12,737 17,931 16,441 23,146 20,469 28,787 25,699 36,165 32,259 45,351 41,084 57,864 51,391 72,330 67,629 94,029 82,239 115,728 92,583 130,194 113,052 159,126 127,301 180,825 164,551 231,456 205,418 289,321 256,989 361,651 323,894 455,680 411,124 578,641 513,906 723,301

LBF.FT. 45 35 45 35 45 35 45 35 45 35 45 35 45 35 45 35 45 35 45 35 45 35 45 35 45 35 45 35 45 35 45 35 45 35 45 35 45 35 S-1000-62*

S-1000-49*

S-1000-39*

S-1000-31*

S-800-38*

S-800-31*

S-800-24*

S-600-38*

S-600-31*

S-600-27*

S-500-32

S-500-25

S-500-20

S-400-24

S-400-19

S-400-15

S-400-12

S-300-17

S-300-11

STEERING ACTUATOR ANGLE MODEL

TORQUE RATING IS DETERMINED AT 1500 PSI (103 BAR)

S2-11 S2-16 S2-18 S2-25 S2-23 S2-32 S2-28 S2-40 S2-36 S2-50 S2-45 S2-63 S2-57 S2-80 S2-71 S2-100 S2-94 S2-130 S2-114 S2-160 S2-128 S2-180 S2-156 S2-220 S2-176 S2-250 S2-228 S2-320 S2-284 S2-400 S2-355 S2-500 S2-448 S2-630 S2-568 S2-800 S2-711 S2-1000

STEERING GEAR MODEL

RATED TORQUE

NO. OF RUDDERS

RUDDER ANGLE

Two S-800-31 actuators producing a torque of 32.0 T.M. on two rudders at 2 x 35°

Description of Model S2-320-2-35 Steering Gear:

TORQUE In T.M. x 10

MODEL S STEERING GEAR CODE Example: S2 - 320 - 2 - 35

M (Max Dia) 4.54 5.09 5.28 5.92 5.75 6.44 6.18 6.93 6.67 7.47 7.19 8.06 7.80 8.74 8.40 9.42 9.21 10.28 9.83 11.01 10.22 11.45 10.93 12.25 11.37 12.78 12.38 13.88 13.34 14.95 14.37 16.10 15.52 17.39 16.81 18.83 18.10 20.29

SINGLE RUDDER

NO. OF ACTUATORS S2=Two steel actuators S4=Four steel actuators

1½"SAE 4-bolt 10.00 10.50 21.00 18.00 7.50 flange

1¼"SAE 4-bolt flange

1" SAE 4-bolt flange

11/16"-12 SAE straight thread

11/16"-12 SAE straight thread

¾"-16 SAE straight thread

D

STEERING SYSTEM SPECIFICATIONS (INCH)

Note: Hoses, shut-off valves and tiller pins are not supplied with Model S Actuators

TORQUE RATING IS DETERMINED AT 1500 PSI (103 BAR)

T.M.

STEERING GEAR MODEL

RATED TORQUE

2,130 2,098 3,343 3,294 4,310 4,244 5,359 5,277 6,735 6,637 8,456 8,325 10,783 10,619 13,470 13,290 17,518 17,272 21,565 21,254 24,253 23,909 29,644 29,218 33,692 33,200 43,131 42,508 53,880 53,110 67,383 66,433 84,934 83,721 107,794 106,253 134,734 132,817

DISPL.

189 230 296 360 215 261 267 325 336 408 421 512 344 418 430 522 559 679 478 580 537 653 657 798 420 510 537 653 671 816 537 653 677 823 860 1,045 1,074 1,306

A

129 183 202 287 147 209 182 259 229 326 287 409 234 334 293 417 381 542 326 463 366 521 448 637 286 407 366 522 458 652 366 521 462 657 586 834 733 1,043

C

1½"SAE 4-bolt flange

1¼"SAE 4-bolt flange

1" SAE 4-bolt flange

11/16"-12 SAE straight thread

11/16"-12 SAE straight thread

¾"-16 SAE straight thread

D

254

191

159

116

94

78

E

267

203

159

129

98

78

F

533

406

305

216

178

140

G

457

330

260

178

146

117

H

191

146

114

92

67

56

J

M36

M24

M20

M20

M16

M12

K (Bolt Dia)

SINGLE RUDDER M L (Max Dia) 134 115 150 129 156 134 174 150 146 169 190 164 182 157 204 176 197 169 220 190 212 183 237 205 230 198 258 222 248 213 277 239 271 234 303 261 290 250 325 280 301 260 338 291 322 278 361 311 335 289 377 325 365 315 409 352 393 339 440 380 423 365 474 409 457 394 512 442 495 427 555 478 533 460 598 515

TWIN RUDDERS M L (Max Dia) 106 92 119 103 123 106 138 119 134 116 151 130 145 125 162 140 156 134 175 151 168 145 188 162 182 157 204 176 196 169 220 190 215 186 240 207 230 198 258 222 206 239 231 268 256 220 286 247 266 229 299 258 290 250 325 280 312 269 350 301 336 290 377 325 363 313 407 351 393 339 440 380 423 365 474 409

Dimensions A-M are all in millimeters ¹ Model S2 indicates 2 actuators are used. S4 indicates 4 actuators ² Other steering angles are also available ³ Other actuator stroke lengths are available upon request * These actuators require 6 tail mounting bolts (K on chart) All other actuators require 4 tail mounting bolts (K)

Note: Hoses, shut-off valves and tiller pins are not supplied with Model S Actuators

724 724 958 958 869 869 983 983 1135 1135 1322 1322 1232 1232 1421 1421 1704 1704 1730 1730 1861 1861 2123 2123 1735 1735 1993 1993 2287 2287 2255 2255 2562 2562 2962 2962 3434 3434

B

STEERING SYSTEM SPECIFICATIONS (METRIC)

BOAT OPERATING EQUIPMENT

45


BOAT OPERATING EQUIPMENT

Steering Gear Arrangements Twin Rudder

Single Rudder Two Actuators

Arrangement option 1

Four Actuators

Arrangement Option 2

Jastram Model S steering gears are supplied with either two or four Model S actuators and can be used with single, twin or multiple rudders. These actuators and tillers are are designed and manufactured to meet the standards of all major classification societies. Model S hydraulic actuators have passed rigorous inspection and testing and are CERTIFIED UNDER THE ABS, DNV & GL TYPE APPROVAL PROGRAMS.

The S Model Actuators are Type Approved for under the following standards: • ABS Type Approved Product under 2006 Building and Classing Steel Vessels 4-3-4/7.3. • DNV Type Approved for Classification of Ships on the Model S-300, S-400, S-500, S-600, S-800 & S-1000 hydraulic actuators. • GL Type Approved for "Rules for Classification and Construction" Part 1, Chapter 2 Section 14A "Steering Gears", Edition 2008.

Data is subject to change without notice. Jastram Engineering Ltd. 135 West Riverside Drive | North Vancouver BC | Canada V7H 1T6 | T 604 988 1111 | F 604 986 0334 E marketing@jastram.com | www.Jastram.com

46

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT OPERATING EQUIPMENT

Photo courtesy of Bumi Armada

Jastram Analog Input Devices A complete Jastram steering system will include some or all of our Input Devices combined with the appropriate control and hydraulic systems. Analog Input Devices can be used with either the Jastram Digital or Analog control systems. The current line of Jastram Analog Input Devices include: • Helm Pumps • Jog Levers • Lever Controllers • Electric Wheel Controllers

Engineered For Life At Sea

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

47


48

The Digital Helm is a unique input device which acts as a manual helm pump in emergency mode. Please see the Jastram Digital Input Device cut sheet for more information.

For more details on Jastram helm pumps please see the H Model technical cut sheet.

Cable Requirements: 18 AWG, 3 Conductor, Standard, Copper wire Voltage: 12, 24 or 36 VDC

• Compatible with all of Jastram’s electro-hydraulic steering systems and most third party autopilots • Four versions available * JO100-1 contains one set of microswitches * JO100-2 contains two sets of microswitches * JO300-1 yacht styling with one set of microswitches * JO300-2 yacht styling with two sets of microswitches • The spring loaded jog switch returns to center when released (The rudder remains where positioned when the lever is released) • Waterproof and corrosion resistant housings, with an IP 66 rating • Supplied with 5ft (1.5 m) of cable

18 AWG, 3 Conductor, Standard, Copper wire 12, 24 or 36 VDC Command Potentiometer Resistance: 1kOhm Linearity: +/- 1.5%

Cable Requirements: Voltage:

• Smoother and more accurate steering than jog steering • Compatible with all Jastram Full Follow-up steering systems and most third party autopilots • The rudder position is displayed by an indicator strip below the lever arm of the LC. (A rudder order indicator is not required.) • Four versions are available: * LC100-1 produces one output signal * LC100-2 produces two output signals - the second signal controls a second amplifier or an alarm circuit * LC300-1 yacht styling; produces one output signal * LC300-2 yacht styling; produces two output signals - the second signal controls a second amplifier or an alarm circuit • Waterproof and corrosion resistant housings, with an IP 66 rating • Supplied with 5ft (1.5m) of cable

The Jastram Lever Controller provides full follow-up (way dependent) electric control. When the steering lever is moved to the desired rudder angle, the rudder will follow-up to the position requested by the lever.

The Jastram Jog Lever provides non follow-up (time dependent) electric control. Jastram

Helm pumps are the standard form of input device. The H model helm is a precision axial piston pump for manual steering systems or auxiliary back up.

Jog Levers operate either completely on (as long as the switch is activated) or completely off (when it is released).

Lever Controllers (LC100, LC300)

Jog Levers (JO100, JO300)

H Series Helm Pumps

BOAT OPERATING EQUIPMENT

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT OPERATING EQUIPMENT

Electric Wheel Controllers (EW200) The EW provides full follow-up electric wheel control. When the traditional steering wheel is turned the EW produces an analog rudder command signal. The rudder will then follow-up to the position commanded by the movement of the wheel. • Compatible with all Jastram Full Follow-up steering systems • Standard shaft size for customer supplied wheel • The EW200 provides 4 turns lock to lock • Multiple output signals are available to control a second amplifier or a rudder order indicator • Steering wheel "feel" is adjustable • The internal mechanism is protected by a slip clutch to prevent damage to the unit • Rudder Order Indicators driver boards are optional * ROIs are recommended so the helmsman knows where the rudder will follow-up to • Waterproof and corrosion resistant housing, with an IP 66 rating

Recommended Cable: Shaft Size: Voltage:

20 AWG, 3 Conductor, Standard, Copper wire Stainless steel shaft with 3/4" shaft, 1:12 Taper 12, 24 or 36 VDC

Command Potentiometer Quantity: Up to 3 Resistance: 1 kOhm +/-10% Linearity: 1.0%

Data is subject to change without notice. Jastram Engineering Ltd. 135 West Riverside Drive | North Vancouver BC | Canada V7H 1T6 | T 604 988 1111 | F 604 986 0334 E marketing@jastram.com | www.Jastram.com

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

49


BOAT OPERATING EQUIPMENT

Photo courtesy of Eric Stapleton

Jastram Analog Control System The core of the Jastram Analog Control system is the Steering Control Amplifier (SCA). The SCA processes the signals from the input devices and directs the hydraulic power units, the steering gear and, ultimately, the rudder. The SCA needs several other components to make up a steering control system. In order to structure a SCA control system in its most basic form the following items are needed: Input Device(s), Control Panel(s), a Command Input Selector (CIS), an electro-hydraulic interface, a Rudder Feedback Unit (RFU) and in certain cases a Conversion & Change-Over valve (CCO). Input Devices CP

SCA

CIS

CCO

Electro-Hydraulic Interface

RFU

Engineered For Life At Sea

50

Equipment Catalogue 2013 /JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz B 15 3/4 (400)

A 15 3/4 (400)

Dimensions CIS Box-2

Note: the CIS enclosure size may change based on the requirements of the vessel.

B 11 13/16 (300)

A 11 13/16 (300)

• Panels can be changed on the vessel in the event of a refit or system reconfiguration • Rotary switch for positive selection of steering controller • Custom configurations available • Built-in station take-over available • Dimensions: * 3 in. (76 mm) wide by 6 in. (152 mm) high, or * 6 in. (152 mm) wide by 6 in. (152 mm) high

• The SCA is designed to work both the RFU 1300 & 2000 • The RFU 1300 features solid-state circuitry and a precision Hall Effect device to accurately monitor the rudder angle * The Hall Effect device is contact-free, increasing component life • The RFU 2000 comes with up to 4 potentiometers for any combination of rudder order or separate independent rudder angle indication • Adjustable limit switches cut off the power steering at a selected rudder angle * These feedbacks come standard with one set of limit switches • The RFU 2000 can be supplied with non-standard options like, center Tap Potentiometers for DP systems, Hall Effect devices, high rudder angles, etc... • Vibration resistant, waterproof construction * Powder painted metal housing with watertight connectors * Heavy duty stainless steel shaft and lever arm with swivel

Dimensions CIS Box-1

The Control Panels are small panels used to activate steering control stations and fulfill the requirements of Class Societies.

The Jastram Feedback units provide an electrical signal giving the actual position of the rudder for both Jastram full follow-up steering and rudder angle indication systems.

The CIS acts as the gatekeeper for the SCA by processing the commands from the input devices and control panels. It comes housed in a IP55, NEMA 12 enclosure and is custom configured for each application. These CIS Enclosures come in two standard sizes.

It is important to note the difference between the two main types of SCA’s available. The SCA 200 is designed to control a standard on / off solenoid while the SCA 300 controls proportional solenoid valves.

• Different versions are available to suit steering characteristics of vessel • Adjustments for: * Rudder angle limit * Helm sensitivity (deadband) * Rudder follow-up two speed response times • Splashproof and corrosion resistant IP 66, NEMA 4 enclosure • Power consumption 12-36 VDC ±10%, < 200 mAmp • Serviceable • Easy to remove and replace • Plug Kits are supplied with SCA

Control Panels (CP)

Rudder Feedback Units (RFU)

Command Input Selector (CIS)

Steering Control Amplifier (SCA)

BOAT OPERATING EQUIPMENT

51


BOAT OPERATING EQUIPMENT

Conversion & Change-Over Manifold (CCO) U.S. Patent 5,146,745 / Cdn. Patent 2,051,294 The Jastram CCO Manifold is an electric hydraulic steering input device for full follow-up wheel steering. The CCO converts hydraulic oil flow (when the helm is turned) into an electrical signal. This signal is transferred to the SCA amplifier which in turn controls the amount of oil flowing to the cylinders from the hydraulic power units. In the event of power failure the CCO seamlessly “changes over” and connects the helm pump directly to the steering cylinder, thus providing manual hydraulic steering. • Easy retrofitting for upgrading manual hydraulic steering to full follow-up power steering • Together with a hydraulic helm pump, provides seamless change-over to backup manual steering if electrical power should fail • Multiple output signals are available to control a second amplifier or a rudder order indicator • Compared to other full follow-up assemblies, the CCO: * Is easy to install * Has fewer moving parts * Generates no heat (for longer unit life)

Data is subject to change without notice. Jastram Engineering Ltd. 135 West Riverside Drive | North Vancouver BC | Canada V7H 1T6 | T 604 988 1111 | F 604 986 0334 E marketing@jastram.com | www.Jastram.com

52

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT OPERATING EQUIPMENT

Photo courtesy of POSH Semco Pte Ltd.

Jastram Digital Control System The Digital Control System consists of four basic components: • A Digital Steering Controller (DSC) • At least one Mode Control Processor (MCP) • At least one Steering Input Device • A Rudder Feedback Unit (RFU) The core of the Jastram Digital Control System is the Digital Steering Controller (DSC). The DSC processes signals from the Mode Control Processors (MCP) and in turn controls the response of the hydraulic power units and, ultimately, the rudder. The MCP is a station processor which connects the signals from the station Input Devices and Control Panels to the DSC. Type Approved Product; see details on back page

Engineered For Life At Sea

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

53


54

Specifications

Rudder position accuracy Safe distance to compass: Short Circuit Protection:

EMC Protection: Dimensions: Weight: Maximum rudder speed

Enclosure Protection: Operable Ambient Temperature: Supply Voltage: Power Consumption:

IP 22, NEMA 2 +5°C to +70°C 12 or 24VDC, -10% +20% Dependent on system configuration approx. 7 Watts, DSC only EN60945, 2005 Approx. 13” x 10” (330mm x 254mm) 4.25 Lbs. (1.93 kg) 8 seconds (on-off) 5 seconds (proportional) ±½° 2 Ft. (0.63 m) Controller (F1), 4 Amps Directional Solenoid (F2), 4 Amps DHM/Speed Solenoids (F3), 4 Amps

Specifications

• Up to five Mode Control Processors can be connected at the same time allowing virtually unlimited configurations of multiple steering stations to be installed, even after the vessel has been commissioned • Built-in self diagnostic software with full follow-up failure alarm assist troubleshooting and system servicing • No routine maintenance required • Optional waterproof enclosure available, IP55, NEMA 12 (As seen in picture to left & above)

Maximum cable length: Cable Break Protection Connector:

Cable:

Cable Specifications

EMC Protection: Dimensions: Weight: Safe distance to compass: Short Circuit Protection: Mounting:

Enclosure Protection: Operable Ambient Temperature: Supply Voltage: Power Consumption:

IP 55, NEMA 12 -25°C to +70°C Supplied from DSC Dependent on system configuration approx. 1 Watt, MCP only EN60945, 2005 Approx. 12” x 8” (300mm x 200mm) 9 Lbs. (4.1 kg) 2 Ft. (0.63 m) Yes 1.5 Amp fuse Bulkhead

2 twisted shielded pairs, 120Ω controlled impedance, RS485 communication cable, Belden 3082A, LAPP 2170340 or equiv. 230m (750 ft.) Yes 3.81mm pitch pluggable screw terminals

• Each MCP has the capacity to process: * Two digital inputs * Two analog inputs * One non follow-up input • Plus the MCP can drive * Two digital and two analog rudder order indicators * Five rudder angle indicators. • Command can be transferred between digital inputs devices instantaneously, without interruption • Allows both ramping control and basic on /off for backup in one non follow-up jog switch • Individual adjustment of indicators is provided • The housing is corrosion resistant

The MCP receives signals from the input devices & control panels then transmits these signals to the Digital Steering Controller for processing. It also receives commands for the RAI, ROI and station transfer logic from the DSC, all through a single RS485 cable.

The DSC is designed specifically for marine steering. It contains a sophisticated microprocessor to perform all computations from the input devices in order to maintain extremely accurate control.

Configuration software is provided to allow each steering system to be customized specifically to the characteristics of each vessel.

Mode Control Processor (MCP)

Digital Steering Controller (DSC)

BOAT OPERATING EQUIPMENT

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT OPERATING EQUIPMENT

Control Panel (CP33, CP36) This unit provides direct button selection of the available steering control modes. It is configured for each system installation. Mode selection is located at every steering station as required by Classification Societies. • Single button panels can be supplied for steering stations requiring only one option • Selected mode of steering is illuminated • Control Panel face is backlit and includes a built-in dimmer control. • Fault light and audible alarm are built in • Black Lexan face panels are: * 3 in. (76mm) wide by 6 in. (152mm) high, or * 3 in. (76mm) wide by 3 3/4 in. (95mm) high • Panels can be modified on the vessel in the event of a refit or system reconfiguration • Selection panels can also be supplied by others for integration into an integrated bridge

Jastram Digital Control System Summary The key features of the Jastram Digital Steering Control System are: • Optional VDR (Vessel Data Recorder) Interface • Autopilot, Joystick or DP systems are easily interfaced • Custom configurations can be easily accommodated including: * Twin independent systems for DP & Joystick complance * Duplicate Full Follow-up systems for redundancy * Proportional hydraulics • The RFU 2000 is the suggested feedback for the Digital system • All Jastram Digital and Analog Input Devices work with the Digital Steering system • DNV Type Approved for Classification of Ships, High Speed & Light Craft and DNV Offshore Standards • GL Approval Certificate Guidelines for the Performance of Type Approvals Part 2, Edition 2003, IEC 60945 (2002)

CP36 Input Devices

MCP DSC

RFU

Data is subject to change without notice. Jastram Engineering Ltd. 135 West Riverside Drive | North Vancouver BC | Canada V7H 1T6 | T 604 988 1111 | F 604 986 0334 E marketing@jastram.com | www.Jastram.com

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

55


BOAT OPERATING EQUIPMENT

Photo courtesy of AF Theriault & Portland Fire Deprt. / City of Portland

Jastram Digital Input Devices A complete Jastram steering system will include some or all of our input devices combined with the appropriate control and hydraulic systems. The Jastram Digital Input Devices can only be used with the Jastram Digital Control system. The current line of Jastram Digital Input Devices include: • Digital Helms (with Digital Helm Manifolds) • Digital Wheels

56

Engineered For Life At Sea

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT OPERATING EQUIPMENT

DIGITAL INPUT DEVICES A complete Jastram steering system will include some or all of our input devices combined with the appropriate control and hydraulic systems. The Jastram Digital Input Devices can only be used with the Jastram Digital Control system. The current line of Jastram Digital Input Devices include: • Digital Helms (with Digital Helm Manifolds) • Digital Wheels

Digital Wheel (DW) Digital Wheels are unique input devices which provide full follow-up digital electric control. The two main features of the Digital Wheel over the standard electric wheel are: 1. A programmable number of wheel turns from ¼ to 10 turns lock to lock and 2. When taking over control of the steering system the Digital wheel takes over at the present position of the rudder Under power steering, the steering wheel is turned producing a rudder command signal. The rudder then follows up to the position requested by the wheel. • Only compatible with Jastram Digital steering systems • Two version of the DW are available: * DW-1 is the standard unit and produces one output signal * DW-2 produces two output signals - the second signal for control redundancy, or for operation of a second steering system where independent twin steering gears are installed • Effort to turn the wheel does not change regardless of operating conditions

Steering Wheel: The wheel is not supplied with the digital wheel. DW shaft dimensions are: • 1” by 1 7/8” shaft with a ¼” square key

Mechanical information:

Warning: Do not use brake fluid or transmission oil • Requires Hydraulic Oil ISO Grade 32 • Housing: * High strength cast aluminum * Powder painted housings * Waterproof and corrosion resistant, IP 66

Specifications: Output Voltage: Connector: Recommended Cable:

12 or 24 VDC DIN connectors 16 AWG 2 wire, not shielded

Data is subject to change without notice. Jastram Engineering Ltd. 135 West Riverside Drive | North Vancouver BC | Canada V7H 1T6 | T 604 988 1111 | F 604 986 0334 E marketing@jastram.com | www.Jastram.com Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

57


58

DH36 shaft dimensions are: • 1” by 1 7/8” shaft with a ¼” square key

Wheel: A wheel is not supplied with the digital helm. Specifications: Output Voltage: Connector: Recommended Cable: 12 or 24 VDC Terminal Block 16 AWG 2 wire, not shielded

• Requires Hydraulic Oil ISO Grade 32 • The DH36 has a displacement of 3.6 cubic inches per revolution • SAE O-ring fittings are used for hydraulic connections • Waterproof and corrosion resistant housing, IP 66

Warning: Do not use brake fluid or transmission oil

Notes:

Two versions available: • DH36 - 1 is the standard unit and produces one output signal • DH36 - 2 produces two output signals - the second signal for control redundancy, or for operation of a second steering system where independent twin steering gears are installed

U.S. Patent 6,564,739 / Cdn. Patent 2,353,053 This patented hybrid hydraulic / electric unit provides full follow-up digital electric control as well as emergency manual hydraulic control. Under power steering, the steering wheel is turned producing a rudder command signal the rudder then follows up to the position requested by the wheel. In the event of a power failure the digital helm seamlessly transfers to manual hydraulic steering. Under emergency manual hydraulic steering the number of turns depends on the size fo the actuators.

• Compatible with the Jastram Digital steering system • To be used in conjunction with a Digital Helm Manifold (DHM) • Under power steering mode: * Adjustable number of wheel turns, programmable from 1/4 turn to 10 turns lock to lock * Effort to turn the wheel does not change regardless of operating conditions • When taking over control of the steering system the Digital wheel takes over at the present position of the rudder. Other systems usually move the rudder back to center before acquiring control of the steering. • Capable of Manual steering

Digital Helm (cont)

Digital Helm (DH36)

Specifications: Output Voltage: Connector: Recommended Cable:

12 or 24 VDC DIN Connectors 16 AWG 2 wire, not shielded

• To be used in conjunction with the Jastram Digital Helm • Within certain parameters, a single DHM can service multiple DH-36 helms

The Digital Helm Manifold (DHM) is a small, compact manifold which provides seamless transfer from fly-by-wire steering to emergency manual hydraulic steering in the event of a power failure.

Digital Helm Manifold (DHM)

BOAT OPERATING EQUIPMENT

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT OPERATING EQUIPMENT

Photo courtesy of Eric Stapleton

Jastram Hydraulic Power Units Jastram manufactures custom and pre-engineered Hydraulic Power Units (HPU) to meet a wide range of requirements. HPUs produce and direct the fluid movement in the steering system. Custom HPUs are available to meet specific design challenges or requirements of the vessel owner, naval architect or shipyard. Preengineered power units are available in limited sizes for faster delivery while maintaining our commitment to quality.

Engineered For Life At Sea

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

59


60

10 10

10 10

JA-501018-1 JA-501018-2

JA-501020-1 JA-501020-2

JA-501021-1 JA-501021-2

JA-501022-1 JA-501022-2

HPU-201-21 HPU-201-11

HPU-401-21 HPU-401-11

HPU-501-21 HPU-501-11

HPU-511-21 HPU-511-11

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

15 15

5 5

3 3

JA-501017-1 JA-501017-2

1 1

HPU-101-21 HPU-101-11

r be

JA-501016-1 JA-501016-2

N rt Pa

um

HPU-051-21 HPU-051-11

PU

H

el od M

o ot M

rH

P

60 50

60 50

60 50

60 50

60 50

60 50

H

z

50 50

50 50

40 40

20 20

10 10

5 5

11.73 12.13

10.33 9.73

8.00 8.00

4.38 4.75

2.92 2.38

1.46 1.20

40.00 41.00

28.00 28.40

28.00 28.40

15.40 14.80

8.90 7.80

3.70 3.10

208-230/460 220/380/440

208-230/460 220/380/440

208-230/460 220/380/440

208-230/460 220/380/440

208-230/460 220/380/440

208-230/460 220/380/440

) n io ns w t ir pt lo e vo al Flo Ou ) m r r ) e u er ly s G x e M e w ns mp t P w pp ha a es e S R Siz (U M Ra (G Po Co (A Po Su 3 p

Jastram Pre-engineered HPU Specifications

• Lockvalve • Vented Reservoir • Adjustable flow control • Pressure gauge • Return line filter • Low level sensor • Push to read Sight / Temp. gauge • Filter clogging sensor • Either 50Hz or 60Hz Motor • Single speed directional valve • Jastram Blue is the only color available

Standard features of Pre-engineered HPUs are:

ng

ki

or

1500 1500

1500 1500

1500 1500

1500 1500

1500 1500

1000 1000

re W ssu ax re M P

If there are any changes beyond the specified options to a Pre-engineered HPU it would become a custom HPU as engineering support would be needed.

Hydraulic Fluid

The minimum start up oil temperature is 0˚ C (32˚ F). If the start up oil temperature is below or remains near 0˚ C for more than a brief interval, consult the factory.

The minimum operating temperature is 40˚ C (104˚ F). If conditions are such that the oil temperature is below this temperature consult the factory.

The maximum operating temperature for the hydraulic oil must not exceed 65˚ C (150˚ F). If operational or ambient conditions cause the hydraulic oil to exceed this temperature then adequate cooling must be provided.

Oil Temperature

WARNING: DO NOT USE TRANSMISSION OR BRAKE FLUID

Use only Standard ISO grade 32 hydraulic oil in all Jastram steering systems.

In addition to the Pre-Engineered HPU’s Jastram supplies custom HPU’s upon request to fit any size and specification including:

The Jastram pre-engineered HPU interfaces the vessel’s hydraulic steering gear with its electric control system. These power units are optimized to work with Jastram cylinders and control systems.

Please contact your local Jastram Dealer for a quotation.

• Special tank shape • Tank capacity • Special motors • Custom manifolds • Custom paint colors

Custom HPUs

Pre - engineered HPUs

BOAT OPERATING EQUIPMENT


BOAT OPERATING EQUIPMENT

Pre-engineered HPU Overall Dimension Drawings HPU-051

HPU-(101 to 511)

Data is subject to change without notice. Jastram Engineering Ltd. 135 West Riverside Drive | North Vancouver BC | Canada V7H 1T6 | T 604 988 1111 | F 604 986 0334 E marketing@jastram.com | www.Jastram.com

Equipment Catalogue 2013/JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

61


BOAT OPERATING EQUIPMENT Photo courtesy of All American Marine

Jastram Rudder Angle Indicators Series 300 RAI Know your rudder angle at all times! The Jastram Series 300 Rudder Angle Indicator System provides continuous, accurate indication of your rudder’s position. Every Jastram RAI system requires a feedback unit and at least one rudder angle indicator. In a system up to five indicators can be used with a mixture of forward and reverse scale meters. The 2 main components in a Jastram RAI system are: 1. Rudder Angle Indicator 2. Rudder Feedback Unit

Engineered For Life At Sea

Photo courtesy of All American Marine

Jastram Rudder Angle Indicators Series 300 RAI Know your rudder angle at all times! The Jastram Series 300 Rudder Angle Indicator System provides continuous, accurate indication of your rudder’s position. Every Jastram RAI system requires a feedback unit and at least one rudder angle indicator. In a system up to five indicators can be used with a mixture of forward and reverse scale meters. The 2 main components in a Jastram RAI system are: 1. Rudder Angle Indicator 2. Rudder Feedback Unit

Engineered For Life At Sea

62

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT OPERATING EQUIPMENT Photo courtesy of All American Marine

Jastram Rudder Angle Indicators Series 300 RAI Know your rudder angle at all times! The Jastram Series 300 Rudder Angle Indicator System provides continuous, accurate indication of your rudder’s position. Every Jastram RAI system requires a feedback unit and at least one rudder angle indicator. In a system up to five indicators can be used with a mixture of forward and reverse scale meters. The 2 main components in a Jastram RAI system are: 1. Rudder Angle Indicator 2. Rudder Feedback Unit

Engineered For Life At Sea

Series 300 Indicator

Rudder Feedback Unit

• 75mm (3in) face diameter • The Series 300 are IP 56 to the face • Indicator readings are not affected by low or fluctuating supply voltage • Reverse polarity protected • Backlight for increased visibility of the scale • Optional Backlight Dimmer available • Each indicator has a gain adjustment for easy synchronization • Reverse scale indicators are available for aft facing stations • Indication up to 50 degrees port and starboard • A high quality construction, anodized housings • Fast Response time; up to 5 second rudder speeds

• High-impact, waterproof housings • Fitted with plug-in connector for easy wiring and exchange of units in the field • Internal gain adjustment controls the maximum pointer deflection of all system indicators • Resistant to heavy vibration • Some models can provide rudder position signal to an autopilot • Unit must be mechanically linked to the rudder stock • Corrosion-resisting brass lever linkage and swivels are supplied w/ RFU 400 • Optional Rudder Stock Clamp is available • Supply Voltage; 12, 24 & 36 VDC

Series 300 Indicator housings • Cases are standard SAE size • Optional Flushmount Bezel (IP56 to the face) supplied with a seal for splashproof installation • Optional bulkhead mount Waterproof Housing for outside stations (IP66)

Rudder feedbacks for the Series 300 RAI system are: RFU 400 Commercial potentiometer and driver board RFU 1300 Hall effect device, driver board and limit switches (used with control system) RFU 2000 Commercial potentiometer, driver board and limit switches (used with control system)

RAI Signal Inputs:

Power Supply: Cable:

400 ohms movement 0 volts @ 0 degrees ±1 mA / 50 degrees 12, 24, 36 VDC 18 AWG, 4 wire, shielded

Data is subject to change without notice. Jastram Engineering Ltd. 135 West Riverside Drive | North Vancouver BC | Canada V7H 1T6 | T 604 988 1111 | F 604 986 0334 E marketing@jastram.com | www.Jastram.com

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

63


BOAT OPERATING EQUIPMENT

Photo courtesy of Bumi Armada

Jastram Rudder Angle Indicators X80 Series The X80 Series Rudder Angle Indicators are produced to fill the requests of vessels operators and to meet Classification Societies’ requirements. The X80 Indicators come in 3 sizes to fit all bridge applications. In a system up to five indicators can be used with a mixture of forward and reverse scale meters. The 2 main components in a Jastram X Series RAI system are: 1. Rudder Angle Indicator(s) 2. Rudder Feedback Unit (RFU)

RAI 3300 The largest of the series is the 3300 overhead three faced panoramic indicator. These are stand alone systems comprised of three main components: 1. A three faced panoramic Rudder Angle Indicator (RAI 3300) 2. RAI 3300 power supply 3. Rudder Feedback Unit

Engineered For Life At Sea

64

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT OPERATING EQUIPMENT

The X80 Series

The RAI 3300

• Wheelmark and MED Approved • Dimmable backlit analog display • Designed to be flush-mounted into any convenient panel or console • Reverse scale indicators are available for aft facing stations • Indication up to 50 degrees port and starboard • Drive up to five indicators from one feedback

• Accurately shows the position of the rudder on three large scale analog displays • Built-in dimmer allows for adjustment of the backlight • Deckhead mounted at any convenient location in the wheelhouse • Two Power Supply options are available * Input voltage of 12-24 VDC and outputs 24 VDC * Input voltage of 100- 40 VAC and outputs 24 VDC • Cable requirements 16 AWG, 3 wire, shielded

Rudder Feedback Units for the X80 Series are: RFU 400 Commercial potentiometer and driver board RFU 1300 Hall effect device, driver board and limit switches (used with control system) RFU 2000 Commercial potentiometer, driver board and limit switches (used with control system)

Rudder Feedback Units for the RAI 3300 are: RFU 300 Commercial potentiometer RFU 2000 Commercial potentiometer, driver board and limit switches (used with control system)

IP Ratings: • X80’s are rated for IP52 protection (to the face) • Optional seal kits available for IP66 protection (to the face) • Optional 580 Bulkhead Mount version available for IP66 to the whole indicator

X80 Signal Inputs:

Power Supply: Cable:

0 Volts at 0 Degrees ±1 Volts at ±50 Degrees 1 kΩ input resistance 24VDC, Max 150 mA 18 AWG, 4 wire, shielded

X80 Models & OADs

280

380

580 Data is subject to change without notice.

Jastram Engineering Ltd. 135 West Riverside Drive | North Vancouver BC | Canada V7H 1T6 | T 604 988 1111 | F 604 986 0334 E marketing@jastram.com | www.Jastram.com

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

65


BOAT OPERATING EQUIPMENT

MOTOR STARTER & ALARM SYSTEMS Motor starter & alarm (msa) systems control and monitor the Function of hydraulic power units. In essence, they start and stop the electric motor which drives the hydraulic pump powering the steering gear. The Jastram MSA system consists of three main components: • The motor starter and alarm box • The alarm panels • The starter panel Starter Panels (SP-36) The SP - 36 panels are dedicated to starting and stopping the steering gear hydraulic power units motors at the vessels local and remote stations. • Rotary switch for remote start / stop of interlocked HPU motors • Multiple panels can be installed in system • Motor start and stop functions for 2 Hydraulic Power Units • Dimensions: * 3” x 6” (76mm x 152mm)

Specifications

Contact Format Number of Contacts Maximum Switching Capacity Connector

Maintained Action, Normally Open 4 5.5 Amps, 240 VAC (AC11) M3.5 (Metric) screw terminals

Data is subject to change without notice. Jastram Engineering Ltd. 135 West Riverside Drive | North Vancouver BC | Canada V7H 1T6 | T 604 988 1111 | F 604 986 0334 E marketing@jastram.com | www.Jastram.com

66

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

Specifications

Dimensions: Weight: Mounting:

Supply Current Draw

Steering Control Power Supply Output

Main 3 phase supply fuses: Control Fuse (F4)

Enclosure Protection: Operable Ambient Temperature: Main AC Supply Voltage: Emergency DC Supply Voltage: HPU Motor Horsepower

24 VDC (4 Amp Max.) Auxiliary DC 30 mA normal operation 2.5 Amps (max.) emergency operation Approx. 20” x 27” x 11” (508mm x 686mm x 269mm) 67 Lbs. (30.5 kg) (Max.) Bulkhead any orientation

IP 66, NEMA 4 0°C to +55°C 208 – 575 VAC, 3 phase, 50 Hz or 60 Hz 24VDC, -10% +20% 1 Hp to 40 Hp (Note: Motors larger than 460 V/40 Hp require a larger enclosure size) 3 Amps 8 Amps

Indicator Common Indicator Signal Format PWM Frequency Output Current Connector

Specifications

PWM controlled sinking to ground 24 VDC from MSA 78 Hz 750mA (Max.) per indicator 6mm spacing screw terminals

• Dedicated Pushbuttons to test and silence the Alarm Processing Units indicators • Dedicated buttons for dimming and brightening the backlighting • Pushbuttons and Indicator options include * Up to 11 standard steering gear alarms and indicators are provided * AP - 33 can be populated with up to 9 buttons * AP - 36 can be populated with up to 18 buttons • LED visual indicators display normal operating and failure modes • Multiple panels can be installed in the MSA system • Optional Motor start and stop capability • Dimensions: * AP - 36 is 3” x 6” (76mm x 152mm), * AP - 33 is 3 in. (76mm) wide by 3 3/4 in. (95mm) high

These customized panels provide visual and audible alarms at both local and remote stations.

This unit is the control and monitoring center of the MSA system.

• MSA system is designed to meet all major Classification Societies’ requirements • Each MSA box services one hydraulic power unit • Start / Stop capabilities at local and remote stations • The MSA box connects to multiple remote alarm panels • The two main types of panels are the alarm panel (AP) and the starter panel (SP) * Panels used to indicate the status of the steering gear alarms (AP-36, AP-33) * To start and stop the HPU motor (AP-36, SP-36) * AP panels are fitted with independent dimming controls • MSA motor interlocking prevents two motors, connected to two MSA units, from being run simultaneously • HPU Low Oil Sensor signal is a dry contact input representing the oil level in the HPU reservoir • Spare Alarm Sensors signals are dry contact inputs for up to four spare alarms • Automatic transfer to backup power supply upon failure of primary power keeps the steering alarms active • Automatic restart timer • Visual indicators at both local and remote panels to warn of events taking place in the steering system • Options: * VDR interface can be added to MSA system for Class requirements * Ship’s AC Supply output for Dehumidifier in HPU motor * Serial Output for third party systems, i.e., Ship’s Central Monitoring System * Ammeter, Hour Counter, Engineer’s Delayed Alarm, Hydraulic Lock Alarm

Alarm Panels (AP-33, AP-36)

Motor Starters & Alarm Box

BOAT OPERATING EQUIPMENT

67


BOAT OPERATING EQUIPMENT

Photo Courtesy of Victoria Shipyard

Jastram Model H Helm Pumps This high quality, precision axial piston pump features proven designs and marine grade materials. The H pumps are designed to operate in ‘non-pressurized’ hydraulic systems requiring only two lines from the helm pump to the cylinder. The Model H helm pumps include the following standard features: • An external lockvalve to isolate with helm and prevent rudder feed-

back • A pressure rating for the lockvalve of 1,875 PSI • A powder coated, high strength cast aluminum housing which provides corrosion and abrasion resistance • A flexible mounting pattern allowing any angle between the vertical and horizontal axis • An internal capacity to act as a small vented oil reservoir

Recommended Wheel Sizes for the Model H helm pumps MODEL STEERING WHEEL SIZE min diameter max diameter H20 14” 24” H26, H36 20” 30” H58 30” 36” H60, H90, H110 36” 60”

Engineered For Life At Sea

68

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT OPERATING EQUIPMENT

G* = Length of key for steering wheel: H20 has 3/16" x 1" long sq. key on a 3/4" dia. Taper (1" per foot) shaft. H20 has a 5/16" NC wheel bolt. All other pumps have 1/4" sq. key on a 1" dia. Straight shaft. All other pumps have a 1/2" NC stainless steel wheel bolt.

HELM PUMP OVERALL DIMENSIONS (INCHES) Helm Pump Model

Helm Pump Displacement (IN³)

A

B

C Dia.

H20 H26/ 36/ 58 H60/ 90/ 110

2.0 2.0 / 2.6 / 3.6 / 5.8 6.0 / 9.0 / 11.0

5 5/8" 5 5/8" 7 1/2"

4 3/8" 4 3/8" 5 7/8"

9/32" 9/32" 13/32"

Helm Pump Model

H20 H26 H36 H58* H60 H90 H110

Part Number

G

H1

H2

8 5/8" 1 17/32" 2 13/32" 9 17/64" 2 5/32" 2 27/64" 15 27/64" 4 1/4" 3 27/32"

D

E

3/16" sq key x 1" LG 1/4" sq key x 1 1/2" LG 1/4" sq key x 1 25/32" LG

1/4" NPT 1/4" NPT 1/2" NPT

3/8" NPT

-

3/8" NPT -

3/4" UNF

Cubic Inch Displacement Per Revolution

Weight (LBS)

Weight (Kg)

11.9 11.9 11.9 12.8 41.9 41.9 41.9

5.4 5.4 5.4 5.8 19.0 19.0 19.0

JA-301001-3 JA-301001-1 JA-301001-2 JA-301007-1 JA-301002-1 JA-301002-3 JA-301002-2

F

2.0 2.6 3.6 5.8 6.0 9.0 11.0

H3

*The H58, which requires a header tank or auto-fill system Recommended line sizes and lengths are based on the combined distance of both lines Helm Pump Model

H20/H26/H36 H58 H60/H90 H110

50FT

1/2" 5/8" 5/8" 3/4"

Distance between Helm & Cylinder 65FT

5/8" 5/8" 5/8" 3/4"

95FT

5/8" 3/4" 3/4" 1"

Min Wall Thickness Tube Dia. Wall

1/2" 5/8" 3/4" 1"

0.035" 0.049" 0.049" 0.065"

Standard ISO Grade 32 Hydraulic oil must be used within a Jastram hydraulic steering system.

WARNING: DO NOT USE TRANSMISSION OIL OR BRAKE FLUID Jastram Helm pumps are serviceable, seal kit part numbers are: • JA-950000-1; covers Model H helms H20, H26, H36 and H58 • JA-950001-1; covers Model H helms H60, H90 and H110

Data is subject to change without notice.

Jastram Engineering Ltd. 135 West Riverside Drive | North Vancouver BC | Canada V7H 1T6 | T 604 988 1111 | F 604 986 0334 E marketing@jastram.com | www.Jastram.com

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

69


BOAT OPERATING EQUIPMENT

HEAVY DUTY HELM VALVES

09/01

Yacht & Commercial Steering

Safety Relief Valve DARB

The DARB (Double Acting Relief and Bypass) Valve is a protective device. Each steering gear system, regardless of its size, should be equipped with a DARB to protect the rudder and the actuator from possible external damage due to grounding or excessive wave force action. Design Features •

The Double Acting Relief Bypass Valve is available in three models (10 gpm, 30 gpm and 50 gpm).

The DARB valve has two modes of operation: In the normal mode the crossover relief valve protects the steering system against hydraulic shock and over-pressurization. If impact occurs between the rudder and an underwater object, or if there is an internal pressure build-up that causes the hydraulic pressure to exceed the pre-set limit of the relief valve the DARB Valve allows oil to bypass. This helps prevents damage to the steering gear or its associated equipment. In the bypass mode the DARB Valve opens across the port and starboard lines allowing for emergency steering. This is also very helpful when “bleeding” (purging) the hydraulic steering system of air.

For further details please consult the technical manual MAN 00401.

Part number

Description

JA-401003-1

DARB 10 DARB 30 DARB 50

JA-401003-2 JA-401047-1

*

Capacity gpm

Lbs (Kg)

10 30 50

6.6 (3.0) 6.8 (3.1) 28.0 (12.7)

( * see drop-in replacements)

70

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT OPERATING EQUIPMENT

HEAVY DUTY HEADER TANK

09/01

Yacht & Commercial Steering Accessories

Header Tank

A Header or Expansion Tank installed at the highest point of the steering system ensures that the system will always remain full of fluid. The fluid in the tank compensates for the slight expansion of the fluid in the system due to heat. A header tank also helps with proper filling and bleeding of the system. It’s highly recommended when multiple steering stations are incorporated into a steering system. The sight gauge on the tank allows the operator to observe the level of fluid in the system. If a leak develops it will be immediately apparent. Design Features • • • •

Lightweight aluminum housing dissipates heat. 1.5 liter (90 in3) oil capacity. Black epoxy paint. Suitable for indoor or outdoor installation.

Part number

Description

Lbs (Kg)

JA-521011-1

Header tank

3.1 (1.4)

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

71


BOAT OPERATING EQUIPMENT

AUTOPILOT INTERFACE

05/02

Yacht & Commercial Steering

Autopilot Interface API 180

The API 180 is a stand-alone solenoid operated hydraulic manifold. This allows for the interface of electric steering controls to hydraulic steering systems. The API manifold is equipped with a single speed 4-way directional solenoid valve, relief valve. The API 180 is suitable for an input flow rate of up to 12 gpm and an adjustable output flow rate of up to 3 gpm.

Design Features • • •

Anodized aluminum body. Single speed. Available in 12, 24, 32 VDC and 110, 220 VAC.

For further details please consult the technical manual MAN 00702.

72

Part number

Description

JA-401051-11 JA-401051-12 JA-401051-13 JA-401051-14

API 180 auto pilot interface API 180 auto pilot interface API 180 auto pilot interface API 180 auto pilot interface

Voltage

Lbs (Kg)

12 VDC 24 VDC 32 VDC 110 VAC

4.4 (2.0) 4.4 (2.0) 4.4 (2.0) 4.4 (2.0)

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT OPERATING EQUIPMENT

JOG LEVERS

09/01

Yacht & Commercial Steering

Jog Lever JO100 (For Non Follow-up Electric Steering)

The JO100 “non follow-up” power steering Yacht &anCommercial Steering lever offers economical and effective means of steering your vessel with minimal Jog Lever JO100 / JO200 effort. JustFollow-up by movingElectric the handle you send (For Non Steering) an electric signal to the directional valve on Yacht & follow-up” The hydraulic JO100 “nonpower offers an the unit.power This,steering in turn, lever sends economical and effective Commercial fluid to your steering Steering cylinder, causing the means of steering your vessel with minimal vessel to turn to port or starboard as effort. Just by moving the handle you send (For Non Follow-up Electric Steering) desired. Jog levers, unlike full follow-up an electric signal to the directional valve on the hydraulic power The JO200 “non-follow-up” power steering lever levers, have a spring unit. This, in turn, sends loaded handle that offers economical andwhen effective means always returns to center released. fluid to an your steering cylinder, causing the vessel of to turn to port or steering your vessel with addition minimal to effort. They make excellent yourJust by starboard as an desired. Jog levers, unlike levers,signal have ato spring moving thehelm handle, you send an electric hydraulic pump atfull thefollow-up main steering JO100 loaded handle that the directional valve on the hydraulic power unit. station or as an economical means of alwaysinreturns to centre when released. This, turn, sends fluid to your steering cylinder, installing as many secondary control stations as you might require. They make an excellent addition to your hydraulic helm pump at causing the vessel to turn to port or starboard as the main steering desired. Jog levers, unlike “full follow-up” levers, station or as an economical means of installing as many Design Features have a spring loaded handle always returns secondary control stations as youthat might require. to center when released. They make an excellent Design Features · Large handle. Easy to use even with gloved or cold hands. addition to your hydraulic helm pump at with the main • Large handle. Easy to use even gloved or cold hands. ·steering Available with either one or two sets of internal micro switches. station or as an economical means of • Available with either one or two sets of internal micro switches. · Jog levers made from tough control molded stations plastic andasstainless installing asare many secondary • ensuring Jog levers steel, troubleare made from tough molded plastic and stainless steel, ensuring trouble you might freerequire. operation for atime. very long time. free operation for a very long · Compatible with most autopilots and existingand steering • Compatible with most autopilots existing steering systems. systems. • Waterproof, suitable for indoor and outdoor use. Design Features · Waterproof, suitable for indoor and outdoor use. 09/01

Jog Lever JO200

For furtherdetails details please consult the technical manual MANJO200 01401. - SAME MOUNTING AS For •further pleaseEasy consult manual MANor01401. Large handle. to the usetechnical even with gloved cold hands. WAGNER JOG JO200 • Available with either one or two sets of internal micro switches. • number Jog levers are made from tough molded plastic and stainless steel, ensuring trouble Part Description Lbs (Kg) free operation for a very long time. • Compatible JO100-1 with mostjog autopilots steering systems. JA-701005-1 lever, and 1 setexisting micro switches 0.9 (0.4) • Waterproof, suitable for indoor and outdoor use. JA-710005-3 JO100-1D jog lever, 1 set micro switches, dodge contact 0.9 (0.4) • Same mounting arrangement jog. switches JA-701005-2 JO100-2 jog lever,as 2Wagner sets micro 0.9 (0.4) JA-710005-4 JO100-2D jog lever, 2 sets micro switches,dodge contact 0.9 (0.4) For further details please consult technicalJO100 manual MAN 01402. Adaptor kit *the ( converts into Wagner jog JO200) JA-950078-1 ( * see drop-in replacements)

Part number

Description

Lbs (Kg)

JA-701005-9 JA-950078-1

JO200-1W jog lever * Adaptor kit * (converts JO100 into Wagner jog JO200)

0.4 (0.9) -

( * see drop-in replacements)

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

73


BOAT OPERATING EQUIPMENT

Yacht & Commercial Steering Rudder Angle Indicator RAI 301 The Series 301 Rudder Angle Master Indicator provides an accurate and continuously updated indication of your rudder position. Up to five additional extra RAI 300 indicators can operate at the same time in conjunction with the standard RAI 301 indicator in a stand-alone system. Installation is easy and requires only shielded 2 conductor wire, 24 AWG for cable runs up to 65’ (20 meters). Picture shown includes optional bezel. Design Features · Maximum current draw (1mA / indicator). · Five indicators maximum. For applications with more than 5 indicators please contact the manufacturer. · All indicators are polarity protected. · Operate on 12, 24 or 32 VDC. Only the light bulb must be chosen according to the exact voltage. · The RAI 301 meter requires a RFU 150 or RFU 300 follow-up unit. For further details please consult the technical manual MAN 01205.

HOUSINGS & ADAPTERS A

B

C

A. JA-JB-801008 The RAI bezel provides a frame appearance for the rudder angle indicator as well as additional protection against spray and weather. B. JA-950078-1 The jog switch adapter plate provides a drop-in fit for Jastram jog switches when replacing Wagner jog switches. C. JA-1011005-4 This RAI waterproof mount houses the RAI for exposed outdoor applications

74

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT OPERATING EQUIPMENT

RUDDER FOLLOW-UP UNIT

09/01 09/01

Yacht Rudder Yacht&& RudderFollow-up Follow-upUnit Unit Commercial CommercialSteering Steering RFU 150 / 300

RFU 150 / 300

Knowing the position of the rudder Knowingsafety the position the rudder enhances and is of a great help while enhances safety and is a great help while docking ordocking maneuvering. Designed for commercial or maneuvering. Designed for commercial use, the RFU 150/300 is ruggedly built to use,water the RFU ruggedly resist and150/300 damageiscaused by built to resist water damage caused by vibration from and rough seas and mechanical vibration from rough seas and mechanical systems. The RFU 300 features a high systems. RFU 300 features a RFU high quality, longThe life potentiometer. The quality, long life potentiometer. The RFU 150 features a light duty potentiometer. 150units features light heavy-duty duty potentiometer. Both havealarge gears. A Both units have large heavy-duty gears. RAI 301 must be used in conjunction with A RAIfollow-up 301 mustunits. be used in conjunction both For multiple stationwith both follow-up units. For multiple station applications allapplications extra stations must use RAI 300 meters. all extra must with use RAI 300meters) meters.of 3 conductor, shielded, and heat resistant Both units stations are equipped 50’ (15 Both units are equipped with 50’ (15 meters) of 3 conductor, shielded, and heat resistant cable. cable. Design Features Design Features • Up to three indicators can operate at the same time • Up to three indicators can operate at the same time • No adjustment required for 12, 24 or 32 VDC systems, unit operates on any voltage • between No adjustment required for 12, 24 or 32 VDC systems, unit operates on any voltage 10 - 32 VDC. between 10is- 32 VDC. plastic, brass and stainless steel. • Construction of molded • Construction is of molded plastic, brass and stainless steel. • Waterproof design with unique double sealed shaft and waterproof electrical • connections. Waterproof design with unique double sealed shaft and waterproof electrical connections. • 1% linearity heavy-duty potentiometer (RFU 300). 1% linearity heavy-duty potentiometer (RFU 300). • • 2% linearity light duty potentiometer (RFU 150). • 2% linearity light duty potentiometer (RFU 150). For further details please consult the technical manual MAN 01205. For further details please consult the technical manual MAN 01205. Part number Description Part number Description JA-701065-1 RFU 300, c/w 50’cable JA-701065-1 RFU 300, c/w 50’cable

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

Lbs (Kg) Lbs (Kg) *

*

2.6 (1.2)

2.6 (1.2) ( * see drop-in replacements) ( * see drop-in replacements)

75


BOAT OPERATING EQUIPMENT

12/03

76

REVERSING PUMPSETS

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT OPERATING EQUIPMENT

12/03

Equipment Catalogue 2013/JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

77


BOAT OPERATING EQUIPMENT

09/01

Yacht & Constant Commercial Steering

Running Pumpset HPU 180

The HPU 180 continuous running adjustable flow pump set is suitable for medium duty applications on vessels up to 50’. Upon activation by the helmsman the pumpset’s electric motor will run constantly. When it receives a port or starboard command from the autopilot the attached 4-way directional solenoid valve diverts oil to the appropriate actuator ports. Design Features • • • • • • • • •

Available in 12 or 24 VDC supply (voltage must be specified at time of order). Adjustable flow between 0 –170 in3/min. Built-in pressure relief, factory set at 500 psi. Built-in lock valve to prevent hydraulic feedback from rudder or helm. All connecting ports to hydraulic lines are ¼” NPT for ease of installation. Rugged, ball bearing equipped motor and pump are connected via a 4-bolt flange arrangement and a heavy-duty aluminum shaft coupling. The pump set consists of a rugged 2 wire, permanent magnet motor with exchangeable brushes, directly coupled to piston pump. Electrical junction box with start relay, thermal breaker and oversized terminal strips for easy electrical connections. The pump set is fitted with vibration foot mounts for quieter operation.

For further details please consult the technical manual MAN 00504.

Part number

Description

JA-501005-11 JA-501005-22

HPU 180 pumpset HPU 180 pumpset

Displ in3/min

VDC

180 180

12 24

Amp Fuse no load rating 7 4

20 15

Lbs (Kg) 10 (4.5) 10 (4.5)

( * see pump set comparison)

78

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT OPERATING EQUIPMENT

09/01

Yacht & Reversing Commercial Steering

Pumpset Driver RPD 300

The RPD 300 is an H-Bridge Motor drive intended for use with marine autopilots or other small electric motor based control systems. This unit is compatible with 12 VDC and 24 VDC motors rated up to 100 watts (1/8 HP) and is capable of delivering up to 300 watts to handle motor starting currents. Dynamic braking forces the motor to stay stopped when no drive signal is applied. The unit features an overload shut-off, which cuts off drive to the motor if the current rises to an unsafe level such as when the vessel rudder is forced against the stops. The overload protection is reset, by simply removing the drive signal from the input of the unit. This unit is activated by a switched power or clutch drive output which “turns on” the electronic circuits. The port and starboard inputs from the autopilot must be switched “low” to activate the motor.

Design Features

• • • • • • •

Supply voltage: 10 – 30 VDC. Supply fuse: AGC 25A (fuse will blow if supply reversed). Motor output: 300 watts (25 amps @ 12 VDC or 12.5 amps @ 24 VDC). Dynamic braking: both motor outputs switched low when no input applied & enable input is high. Port and starboard inputs: active low (switch to ground to activate motor). Enable input: active high (switch to 10 - 30 VDC to activate motor drive). Temperature range: 0 - 40 deg C.

Part number

Description

JB-814047

RPD 300 reversing pumpset driver

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

Lbs (Kg) 1.0 (0.5)

79


BOAT OPERATING EQUIPMENT

WAGNER HYDRAULIC STEERING

Hydraulic Steering

80

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT OPERATING EQUIPMENT

Hydraulic Steering Type N

Equipment Catalogue 2013/JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

81


BOAT OPERATING EQUIPMENT

The Type N Cylinder

82

Equipment Catalogue 2013 /JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT OPERATING EQUIPMENT

Equipment Catalogue 2013/JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

83


O A T O P ESteering R A T I N G Systems EQUIPMENT CD-i®BGeared

YACHT STEERING SYSTEMS CD-i® Geared Steering Systems

Edson’s classic Rack and Pinion system utilizes a simple, direct linkage from tiller to wheel. All CDi Geared Steerers feature exceptional feel, easy installation and a wide range of mounting options.

So-Pac Marine are proud to be sole New Zealand agents for Edson, unquestionably one of the world Edson’s classic Rack and Pinion system utilizes a simple, direct linkage from tiller to wheel. All CDi leaders in steering for over a century. Marine offerfeel, a easy complete design and installation service Geared So-Pac Steerers feature exceptional installation and a wide range of mounting options. For boats up to 50’ with• Extremely compact - 4” (102mm) x 7” (178mm) the confidence that• can only come by (15.25m). being backed by Edson and their team.

rer

Edson• 5/8” and 3/4” sprockets available has the experience and knowhow to design and build custom Large variety Wheels and components. Accessories. • Highest quality marine-grade Stainless,•Bronze andofAluminum • Fits Edson #430 Carbon Racing pedestal systems for boats from 18′(5m) to 200′(60m) and up. • Highest quality marine-grade Stainless, Bronze and Aluminum components. • Custom Wheels • Tiller-to-wheel conversion kits available.• Tiller-to-wheel conversion kits available. • Fabricated quadrants to meet • 360º Circular Rack Gear – 3 Times the Life Span of Conventional Rack Gears. • 360º Circular Rack Gear – 3 Times the Life Span of Conventional Rack Gears. specific rudderload requirements. • 1.8through Wheel Turns to Hard-Over • 1.8 Wheel Turns Hard-Over to Hard-Over 72ºHard-Over of rudder travel. through 72º of rudder travel. • Mega-yacht systems. ™ • Gleason Coniflex Gears for Ultra-High Strength. • Multi-Speed and Geared • Gleason Coniflex ™ Gears for Ultra-High Strength. reduction systems. • Gear teeth easily accessible for lubrication and inspection. • Dual-Wheel Systems. • Gear teeth easily accessible for lubrication and inspection. • Large 3¼”/83 mm Torque Tube for Superior Strength, Stiffness.

procket sizes. Customer Service.

• Turnbuckle-Style Link for Easy Adjustment. • Large 3¼”/83 mm Torque Tube for Superior Strength,Drag Stiffness. So-Pac Marine with Edson has extensive experience in • Large 3½“/89 mm Diameter Stainless Bearings for Long Life. developing and manufacturing Steering Systems for all types • Turnbuckle-Style Drag Link for Easy Adjustment. of sailboats from daysailors to megayachts. Depend on us from the earliest design stages•ofDesigned the design process can help you develop a and Built toand ISOwe Standards. • Large mm Diameter Stainless Bearings for Long Life. steering system custom tailored to your boat. If3½“/89 you have custom requirements, please contact Marine at 09 448 5900 or info@sopac.co.nz. • CE So-Pac Compliant.

• Designed and Built to ISO Standards.

TP-52 Orlanda relies on Edson’s Race-Proven Ultra-Light Steerer s Geared CD-i Systems

• Low Maintenance.

Carbon Tri-Spoke Wheels • CE Compliant. Edson’s updated version of the classic rackand

and pinion system utilizes a simple, direct • Low Maintenance. linkage from tiller to wheel. • Exceptional feel • Easy installation. ‘C’ • For boats up to 50′ (15.25m). • Classic, Vision Series™ and Internal Pedestal designs available. • Large variety of Wheels and Accessories. • Highest quality marine-grade stainless and aluminium components. onal Wheel Flange • Tiller-to-wheel conversion kits available.

Classic Base Dimensions 14” (5.6 CM) 14"/356mm 6”6"/152mm (15.2 cm)

‘D’

r #698FL - see pg. 8

10.5"/267mm

10.5” (26.7 cm)

D-i D-iSTEERING STEERINGSYSTEMS SYSTEMSCOME COME COMPLETE COMPLETEWITH: WITH:

6” (15.2 cm)

Classic Base Dimensions

Forward View

6"/152mm

Weight lbs kg 2.5 1.13 2.75 1.25

Photos courtesy of Latini Marine

of th 1 0

• Classic, Vision Series™ and Internal Pedestal designs available.

• For boats up to 50’ (15.25m). • Lightweight - 2.5lbs (1.2kg) Custom Systems • Large variety of Wheels and Accessories. • Classic, Vision Series™ and Internal Pedestal designs available.

14”

stal (including estal (includingwheel wheelshaft, shaft, s and ars andtorque torquetube) tube) Shaft -ShaftWheel WheelBrake Brake ut Lever put Levermachined machined ecs. pecs. pRing Ring gLink Linkofofappropriate appropriatelength. length. rArm Armmachined machinedtotospecs. specs. emporary Styling. temporary Styling. Steerer Type pact Design mpact Designand andFootprint. Footprint. 1” Shaft - Size 1 on Pedestals include onSeries Series Pedestals include estal Guard and Single Lever ‘D’ = 4” (102mm), ‘C’=4.13”(102mm) estal Guard and Single Lever ne ineControl. Control.

(5.6 CM) 14"/356mm

CD-i Below Deck Components 6”6"/152mm (15.2 cm)

Vision Series Base Dimensions

51⁄4” 5.25"/133mm (13.3 cm) 6"/152mm 6” (15.2 cm)

6” 6"/152mm

10.5"/267mm

10.5” ULTRA-LIGHT FLANGE STEERER ORDERING(26.7 INFORmATION Installation Requirements cm)

(15.2 Chain Sprocket No of Weight cm) Order # Size Pitch Teeth lbs kg 5 ⁄8 2.2” 11 3.16 1.44 425-100-2-11T* 425-100-2-13T* 5⁄8 2.6” 13 3.2 1.46 425-100-2-15T* 5⁄8 3.0” 15 3.25 1.48 5⁄” CD-i Below Deck Components 3 5.25"/133mm (13.3 cm) ⁄4 Series 2.4” Base Dimensions 10 4.27 1.94 1-1/4” ShaftWheel - Sizeand 2 425-125-3-10T* Vision your choice of Edson 3 your choice of Edson Wheel and 6"/152mm 425-125-3-13T* ⁄ 4 3.1” 13 4.60 2.09 ‘D’ = 4.5” (114mm), ‘C’=5.138”(130.5mm) 6” ssories totocomplete essories completeyour yoursystem. system. Vision™ Series Pedestal Classic™ Series Pedestal 3 (15.2 cm) Vision™ Series Pedestal Classic™ Series 425-125-3-15T* ⁄4 3.6” 15 4.82 Pedestal 2.19 * Standard sprocket size unless otherwise requested. Call for additional sprocket sizes. Rudder Rake = 20° from Vertical Maximum Straight Wheel Shafts are still available on special order. Contact Edson Customer Service. Grand Prix Working Angle of Drag Link = ± 10° Max. from Horizontal NCDI CDIGEARED GEAREDSTEERING STEERINGpEDESTAL pEDESTALSELECTION SELECTIONGUIDE GUIDE withsystems Rudder Amidships. Overall Shaft Head Base Overall Shaft Head Base Faceplate Edson builds the strongest, lightest and most versatile forFaceplate racing boats. 1

4

Rudder Stops and Edson’s Stop Ring

Rudder Stops are a mandatory fitting for any steering arrangement. They insure that loads transmitted through the rudder never exceed the design limit of the steering pedestal and gear. Edson’s Integral Stop Ring/Backing Plate provides an alternative to conventional rudder stops that is much simpler to install and adds additional reinforcement to the cockpit sole. All Edson Stop Rings are marked with angle-indicators for easy installation and adjustment and allow for 72º of total rudder travel. Note: Conventional rudder stops • Extremely compact - 4” (102mm and cockpit reinforcement should still be installed in conjunction with the stop ring whenever • Lightweight - 2.5lbs (1.2kg) #435ST-2-15Tpossible. • 5/8” and 3/4” sprockets availa Grand Prix Steerer • Fits Edson #430 Carbon Racing

Pedestal PedestalType Type ™ Classic Classic™CD-i CD-i ™ Vision Series Vision Series™- MV - MV ™ Vision Series Vision Series™- MA - MA

Order Order# # 464-6T 464-6T

Height Height inin mm mm

Height Height inin mm mm

29.5” 29.5” 750 750mm mm 28” 28” 710 710mm mm

inin

Size Size mm mm

inin

8”8”

203 203

10” 10”

Size Size

mm mm

Weight Size Weight Size lbs. lbs. kgkg width width height height

254 254

3535

1616 n/a n/a

n/a n/a

450-MV-T mm 28” 445x337 14.5” 8.25” 450-MV-T 40.5” 40.5” 1028 mm world, 28” 710 710mm mm 17.5”x13.25” 17.5”x13.25” 445x337 14”x10.5” 14”x10.5” 356 356x267 x267 14.5” 8.25” up to 508888Feet4040LOA (15.25 m) ted performance in1028 the the Ultra-Light • yacht Vectranbuilders Line Drives 450-MA-T 14.3” 450-MA-T 42” 42” 1063 1063mm mm 28” 28” 710 710mm mm20.8”x14.6” 20.8”x14.6”527 527x370 x37014”x10.5” 14”x10.5” 356 356x267 x267 8989 40.5 40.5 18” 18” 14.3” eering system for the modern racing yacht. Edson’s engineers • Ultra-light, ultra-sensitive radials, steerers and sheaves. Note: Note:Overall OverallHeight Heightdoes doesnot notinclude includecompass compassororguard. guard.See Seepg. pg.6868for foroptional optionalClassic ClassicPedestal PedestalGuards. Guards. Wheel, Steering Drum and Line System to achieve a remarkable 50 IMS,IRM and One-Design Winners, the Edson ULRS’s arbon Wheels and Lightweight Radial Drive makes it the lightest,

Maximum Rudder Rake = 20° from Vertical Photo Courtesy KOS/STRATEGIC

Working Angle of Drag Link = ± 10° Max. from Horizontal with Rudder Amidships. Classic Vision Vision Classic Vision“MV” “MV” Vision“MA” “MA” g wheel! Order Order Order #450-MA-T Order#464-6T #464-6T Order#450-MV-T #450-MV-T Order #450-MA-T Featured On: Grand Prix Pedestal Insert Steerer Max. Rudder Torque Load = up to 3,400 ft. lbs. (467 mkg) avings and Low

Typical Installations Suitable for Aft Cockpit Sailboats up to Options 50 Feet LOA (15.25 m) dmDistribution #435ST-2-15T Design om Design Options

Rudder Stops are a mandatory fitting for any steering arrangement. They insure that loads transmitted through the rudder never exceed the design limit of the steering pedestal www.edsonmarine.com and gear. Edson’s Integral Stop Ring/Backing Plate provides an alternative to conventional rudder stops that is much simpler Optional Carbon Racing Pedestal to install and adds additional reinforcement to the cockpit sole. pRIx STEERER ORDERING All EdsonGRAND Stop Rings are marked withINFORmATION angle-indicators for easy Chain Sprocket No of Weight installationSteerer andType adjustment and allow for of total rudder Order # Size72º Pitch Teeth lbs travel. kg ⁄ 2.2” 11 2.5 1.13 1” Shaft - Sprocketrudder for 5/8” Chain 435-100-2-11T* Note: Conventional stops and cockpit reinforcement 1” Shaft - Sprocket for 3/4” Chain 435-100-3-10T* ⁄ 2.4” 10 2.75 1.25 should still*be installed in conjunction with the stop ring whenever Standard sprocket size unless otherwise requested. Call for additional sprocket sizes. Straight Wheel Shafts are still available on special order. Contact Edson Customer Service. possible. 5 3

ength and Add

1.508.995.9711 84

4

TP-52 Orlanda relies o and

Ultra-Light Flange Steerer

Grand Prix Steerer

s’s modern modern racing racing and and cruising cruising designs designs don’t don’t have have toto ited toto production mited production steering steering systems. systems. With With CD-i CD-i Steering Steering Components and the capabilities of Edson’s design m Components and the capabilities of Edson’s designand and acturing and 40 facturing teams, teams, boat boat builders buildersFarr and naval naval architects architects are are donly onlyby bytheir theirimaginations. imaginations.Shown Shownare arejust justaafew fewofofthe the ns Edson‘s Engineers have designed to accommodate ons Edson‘s Engineers have designed to accommodate minstallation installationrequirements. requirements. IfIfyou youhave havecustom customrequirements, requirements, econtact contactEdson EdsonCustomer CustomerService Serviceatat508-995-9711. 508-995-9711.

8

• Extremely compact - 4” (102mm) x 7” (178mm) • Lightweight - 2.5lbs (1.2kg) • 5/8” and 3/4” sprockets available • Fits Edson #430 Carbon Racing pedestal

®

• Ultra-Light design for use on performance Farr 40 boats. • Two sizes available: 1” wheel shaft for Optional Wheel Flange boats up to 40’ or 1-1/4” wheel shaft for Order #698FL - see pg. 8 larger boats with higher steering loads. • Black Hardcote aluminum mounting flanges and sprocket. Optional Carbon Twin Internal Steerer Forward View Wheel TwinRudders Rudders InternalConsole Console Steerer WheelWells Wells Racing Pedestal • Stainless Wheel Shaft, Needle Bearings & Equipment 2013 /JANfeel / © So-Pac Marine Limited Bearing LinersCatalogue provide exceptional 57 pedestals optional Phone 09 448 5900and / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz pedestalsshown shownwith with optionalaccessories. accessories.Instruments Instrumentsnot notincluded. included. GRAND pRIx STEERER ORDERING INFORmATION sensitivity. ULTRA-LIGHT FLANGE STEERER ORDERING INFO • Equipped with either a standard 1” Chain Sprocket No of Weight Steerer Type Order # Size Pitch Teeth lbs kg tapered wheel shaft with 3/16” key or Chain Sproc

www.edsonmarine.com

L

L

1.508.995.9711 1.508.995.9711

5

51 51

otos courtesy of Latini Marine

Visit Visitwww. www. edsonmarine. edsonmarine. com com- -Tech Tech Support Supportto to ownload aaCDi download CDi eering teeringSystem System Installation Installation Worksheet. Worksheet.

Photos courtesy of Latini Marine

Pedestal Insert Steerer Installation Requirements Ultra-Light Racing Systems Max. Rudder Torque Load = up to 3,400 ft. lbs. (467 mkg) Race-proven on numerous ILC, IMS, IRC and One-Design Winners. m™ Rudder Stops and Edson’s Stop Ring Typical Installations Suitable for Aft Cockpit Sailboats • Lightweight Carbon and Aluminium Wheels

Steerer Type

Order #

Size

Pitc


B O A T O P E RWire A TRope I NSheaves G EQ UIPMENT & Assemblies Adjustable Idlers Custom Systems Edson’s Adjustable Idler - designed for boats having the quadrant on the

Edson Articu-Lock™ Sheave Assemblies Edson has theforward experience knowhow design build custom side of theand rudderpost, and the to pedestal eitherand forward or aft Articu-Lock Sheaves – IdealSteering for performance sailboats, cruising/racing catamarans of the rudderpost. They can Edson’s be used for Radial Drive Systems systems for boats from 18′(5m) toand 200′(60m) up. high-tech cruising and yachts above 27 feet. Edson engineers have designed this new when the pedestal is located aft of the rudderpost. Feature anodized sheave to be lightweight, strong and extremely easy to align and lock in place. aluminum bases, stainlessNOTE: uprights, Order ALanodized for aluminum oraluminum BR for bronzesheaves sheaves. • Custom Wheels sheave guards. Heavy Duty Racing/Cruising version with Solid Radialand Drive Wheels Bronze base also for boats with higher rudderloads. • Fabricated quadrants toavailable meet • Single or Double Styles available. • Ideal for boats up to 55’ (17m) with vertical rudderposts where 4” Adjustable Idler – Order #711AL-4AL cables• Sheaves can articulate through 180º for ease of can be led directly from the pedestal idler to the drive wheel. specific rudderload 6” Adjustablerequirements. Idler – Order #711AL-6AL • Three hub sizes to fit rudderposts from 1” (25mm) to 7” (178mm). installation and alignment. • Works well for boats with limited space beneath cockpit floor. Adjustable Racing/Cruising Idler – Order #711BR-4AL • Available in 4”, 6”, 8” and 10” models. • Mega-yacht4” systems. • Easy installation — split design clamps around rudderpost. 6” Adjustable Racing/Cruising Idler – Order #711BR-6AL* • Reduces sheave and steering friction. • Stainless Needle Bearings, Pins and Races virtually 6” Adjustable Idler • Can be used with Pedestal and Bulkhead Steerers. • Multi-Speed and Geared • Heat Treated Anodized Aluminum Construction. eliminate friction and wear. #711AL-6AL • Dished shape for extra strength. • High-Strength, Investment Cast 316 Stainless Base and reduction systems. • Can be mounted up or down for increased versatility and 6” Double - #626ST-6AL Uprights. space savings. • Each Drive Wheel is Custom Bored to your exact • Dual-Wheel Systems. • Large-footprint mounting base for extra support and specification.

4” Adjustable Idler #711AL-4AL

#777-6.5 shown

Edson’s Compact Idler -• Must be secured with Key, Through Bolt designed especially for Edson’s #476 Vision II strength. Compact Pedestal. Recessed versions also available. or Set Screws. • Cast Aluminum or Bronze Sheaves available. 4” Single - #622ST-4AL 4” Adjustable Compact • Rudderstop Included. Idler – Order 713AL-FL-4AL • Steerer can be installed forward or aft of • Positive lock when desired sheave angle is determined. So-Pac Marine with Edson has extensive experience in developing and Replacement Stainless manufacturing Steering 6” Adjustable Compact Idler – Order the rudderpost with713AL-FL-6AL* appropriate idler. Rudder Stop - Order • Ideal for performance sailboats, cruising/racing #862-2 • Unique Wire Tether-Style Rudder Stop Available (Compact Idlers ONLY with 476 pedestals) Systems for all types ofcompatible sailboats from daysailors to megayachts. Depend on us from the earliest Tether-Styleyachts. Rudder catamarans high-tech cruising NOTE: All Radial Wheels mustand be mechanically Stop* - Order #862-wire Quadrants affixed to rudderpost. See Tech-Tip pg 20. • Extra-deep grooved sheaves for extremely safe wire seat. design stages of the design process anddriveswe can help you develop a steering system custom tailored to Larger custom radial can be produced for large and rectangular rudderposts. • 8” and 10” models feature integral grease fittings. Racing/Cruising Idler Standard Quadrants #800-8 shown

your boat.

Edson’s Standard Quadrants are cast Manganese Bronze or 356-T6 heat-treated Aluminum. Available in 8” through 36” radius sizes, the Edson Quadrant is effective whether mounted fore or aft of the rudderpost. The quadrants are machined to accept #618 Take-Up Eyes, making installation and adjustment of steering cables easy. All bearing surfaces are machined, a positive fit is assured by the Edson Capped Hub, and the RADIAL DRIvE SpECIFICATIONS clamping action allows installation without having to remove the rudder.

Adjustable Crossed-Wire Idlers

4” Compact Idler #713AL-FL

6” Single - #622ST-6AL #711BR-6AL (6” shown)

* Customer supplied wire.

NOTE: All Quadrants must be mechanically affixed to rudderpost. See Tech-Tip pg 65.

Edson’s Adjustable Crossed-Wire Idler - for use on boats where the quadrant is aft of the rudderpost or on Radial Drive Steering Systems when the pedestal A = Hub Thickness B = Offset or Dish No. Size in (cm) in (cm) is located forward of thePart rudderpost. This exclusive Edson design crosses the 1 ⁄ (3.2) 6.5Standard Quadrant 1 ⁄ (4.8) NOTE: STANDARD QUADRANT ORDERING #676BR wireGUIDE within the pedestal column and the slanted sheaves, correctly aiming 1 ⁄ (4.1) 8 1 ⁄ (4.1) Measurements 1 ⁄ (3.5)of the 10 2 ⁄ (5.7) the wires at the sprocket777for proper alignment wire to the sheaves, are based ⁄ ⁄ ⁄ 1 ⁄ (3.5) 12 2 ⁄ (5.7) on use with ⁄ reducing the⁄⁄ risk⁄⁄ of chaffing. 15The sheaves are fully adjustable between 10° #776AL-4” 1 ⁄ (3.5) 2 ⁄ (5.7) ⁄ Idler, minimum #and 802-10 shown ⁄ ⁄ ⁄ (4 1) 1 ⁄ (4 1) desired setting. They also 8 Two Single Articu-Lock Sheaves installed. and ⁄⁄ 155° aft lock in place to 1maintain the distances are for ⁄ ⁄ 1 ⁄ (3.5) 10 2 ⁄ (5.7) Each can be mounted and adjusted 4” sheaves (add ⁄ ⁄ ⁄ 800 feature anodized aluminum bases, aluminum Requires two Take-Up Eyes #618. Place nuts (5.7) 1uprights, ⁄ (3.5) 12 2 ⁄ stainless 2” foranodized 6” sheaves). ⁄ ⁄ ⁄ independently for optimum cable lead. ⁄ ⁄ on same side and tighten together.⁄ Greater distances 1 ⁄ (3.5) 15 Heavy 2 ⁄ (5.7) Duty Racing/Cruising sheaves and⁄ Drive sheave guards. version with ⁄ ⁄ are possible – contact Radial wheels and Quadrants 8 2 (5.1) Flat ⁄ All Edson Steering 4” Chain, Wire and Fittings are constructed of the highest quality marine-grade, non-magnetic materials. For replacements, Edson. rudderloads. Crossed-Wire Idler Solid⁄ Bronze⁄ base also available for boats with higher ⁄ 802 10 2 (5.1) Flat measure your existing #776AL-4AL Chain and Wire Rope sizes and lengths. Or contact Edson or your local dealer for the original equipment (6.4)Single Flat 12 2 ⁄ 8” - #622ST-8BR 4” Adjustable Crossed-Wire Idler – Order #776AL-4AL 6” Crossed-Wire Idler specification on your boat. Important! 6” Adjustable Crossed-Wire Idler – Order #776AL-6AL* 10” Single #622ST-10AL #776AL-6AL Wire Rope Sheaves and Assemblies Chain & Wire Rope Kits now include Take-Up All Radial Drive Wheels are supplied with RADIAL DRIvE 4” Adjustable Racing/Cruising Crossed-Wire IdlerORDERING – OrderGUIDE #776BR-4AL #862-2 Rudder Stop. Boat Size Drive Wheel Outside Pilot Max Max Size See #862 on price page for replacement Eyes, Wire Thimbles and Wire Rope Clamps! NOTE: Sheaves must beRadius locked in place when is complete. ⁄ ”-206” S.S. bolts and nuts are Order L.O.A. Diameter Bore adjustment Bore Keyway Weight Adjustable Racing/Cruising Crossed-Wire Idler– Order #776BR-6AL* and additional sizes of rudderstops. Edson’s Standard Quadrants

Cast in Manganese Bronze or weight-saving Aluminum, in 18” and 24” radiuses, these quadrants are substantially proportioned to withstand the most severe steering strains and shocks. The #676 Quadrants are available to fit rudder posts up to 31⁄2”(8.9 cm) in diameter. Order #676, Specify Bore and Key (see Ordering Guide).

7 5

Boat Quadrant Hub Pilot Max Max Order # Material Size Radius Height Bore Dia Bore Dia Keyway Weight L.O.A. in (cm) in (cm) in (cm) in (cm) in (cm) lbs (kg) 1 676BR-8 Bronze up to 35’ 8 (20.3) 19 16 (4.0) 1 (2.54) 31 2 (8.9) 2 (1.3) 12 (5.4) 1 1 (2.54) 31 2 (8.9) 2 (1.3) 13 (5.9) 676BR-10 Bronze 35-45 10 (25.4) 19 16 (4.0) 1 1 (2.54) 31 2 (8.9) 2 (1.3) 15 (6.8) 676BR-12 Bronze 40-50 12 (30.5) 19 16 (4.0) 1 1 (2.54) 31 2 (8.9) 2 (1.3) 17 (7.7) 676BR-14 Bronze 45-55 14 (35.6) 19 16 (4.0) 1 1 (2.54) 31 2 (8.9) 2 (1.3) 36 (16.3) 676BR-16 Bronze 50-60 16 (40.6) 21 2 (6.4) 1 1 (2.54) 31 2 (8.9) 2 (1.3) 36 (16.3) 676BR-18 Bronze 55-65 18 (45.7) 21 2 (6.4) 1 1 (2.54) 31 2 (8.9) 2 (1.3) 15 (6.8) 676AL-18 Aluminum 55-65 18 (45.7) 21 2 (6.4) 1 1 (2.54) 31 2 (8.9) 2 (1.3) 40 (18.1) 676BR-20 Bronze 60-70 20 (50.8) 21 2 (6.4) 1 1 (2.54) 31 2 (8.9) 2 (1.3) 46 (20.9) 676BR-24 Bronze 70-90 24 (61.0) 21 2 (6.4) 1 1 (2.54) 31 2 (8.9) 2 (1.3) 19 (8.6) 676AL-24 Aluminum 70-90 24 (61.0) 21 2 (6.4) Note: When specifying a square bore in a quadrant, please note that the maximum bore dimension is 12” (1.3 cm) smaller.

1 1 1

5

1 1 1

1

Edson highly recommends installing an autopilot independent of the primary steering system. This provides for a redundant/ 1 of steering gear or cable failure backup system in the event 4 in effect an “Electronic Emergency Tiller”. Edson’s Autopilot Tiller Arm allows the autopilot to be mounted independently of the primary steering system and should be used to attach an autopilot to the rudderpost.

supplied and must be installed.

Te c h T i p

IN NO CASE SHOULD THE AUTOPILOT BE ATTACHED DIRECTLY TO THE QUADRANT OR RADIAL DRIVE WHEEL!

1

8

5

8

3

4

3

4

3

4

5

8

3

4

3

4

3

4

4

8

8

Chain, Wire Rope & Fittings

8 8

8

8 8 8

2

# 777-6.5

feet to 30

in (cm) 6.5 (16.5)

in (cm) 13 (33.0)

in (cm) ⁄16 (2-3)

15

in (cm) 3 (7.6)

in (cm) 3 ⁄8 (.95)

Edson’s Chain and Wire Rope Kit

lb (kg) 6.5 (2.9)

One length of roller chain and two lengths of wire are assembled in the sizes and lengths you request. The connections between wire and chain are covered

⁄ (2.3) 2.5 (6.4) ⁄ (.95) 7.5 (3.4) 777-8 to 35 8 (20.3) 16 (40.6) ARTICU-LOCk™ SHEAvE ASSEmbLY ORDERING GUIDE 15

16

3

8

1 ⁄2 (1.3) 10.5 (4.7) 777-10 36-41 10 (25.4) 21 (53.3) 1.5 (3.8) 33⁄8 (8.6) 1) If pedestal is forward of the rudderpost, use the #776AL Idler See Pg 34-35 for 1 Aluminum Bronzein clearSafe Break to prevent fouling. All roller chain and wire rope are shrink plastic ⁄2 (1.3) Max. 22 (10) Tiller Arms 777-12 42-48 12 (30.5) 25 (63.5) 1.5 (3.6) 33⁄8 (8.6) and cross the cables inside Autopilot the pedestal for proper steering 1 Sheave30 (76.2) Base Pin Sheave Sheave Working Wire Rope Tensioning Kits inlcude (2) direction. (8.6) ⁄2 (1.3) Wire 26 (11.8) 777-15 48-55 15 (38.1) 1.5 (3.8) 33⁄8Height stainless, and theStrength chain end fittings are cotter-pinned for Edson’s ease of maintenance. 3 Edson’s Extra Large Bore Quadrants 2) Boats with high rudder loads require independent rudderpost # 8 (20.3) Dia. 16 (40.6)(Approx.) Dia. Weight Weight Load-Lbs. Lbs. ⁄8 (.95) Size 8 (3.6) 800-8 toOrder 35 2.5 (6.4) 3.5Overall (8.9) Stainless Take-Up Eyes, (2) Stainless Thimbles and Designed for boats with larger-diameter rudderposts. Cast in both weightNow includes connecting hardware! 3 3 1 stops. ⁄8 (8.6) 4.5 (11.4) 800-10 36-41 10 (25.4) 4” 21 (53.3)53⁄4” x33 ⁄4” 51⁄4” 1⁄2 (1.3) 1⁄13 4” (5.9) ⁄8” 3.7 lbs 4,000 lbs 8,000 lbs saving Aluminum and Manganese Bronze with strengthening webs through n/a 622ST-4 AL 3)theMax. keyway sizeCompact is handle the maximum keyway that can be Idler - designed the center section of quadrant , these quadrants rudderposts from (11.4) (10.4) 800-12 42-48 12 (30.5) 33⁄8 (8.6) Edson’s Crossed-Wire especially for #476 (4) Stainless Wire Rope Clamps, sized for either Chain & Wire Rope Order #774 Specify Size 10.2 cm25 (63.5) 14.6 xEdson’s 8.3 cm 4.513.3 cm 1⁄2 (1.3) 6 23 mm 10 mm 1.68 Kg 1,814 Kg 3628Assembly Kg 3 ⁄ ”(8.9 cm) to 6”(15.2used cm) inwith diameter. 3 1 1 the maximum bore. 5 ⁄8 (8.6) 4.5 (11.4) 800-15 48-55 15 (38.1) 6” 30 (76.2)53⁄4” x33 ⁄4” 71⁄4” ⁄2 (1.3) 527 ⁄16”(12.2) ⁄8” 4 lbs 5,000 lbs 8,000 lbs Order #835, Specify Material,Vision Bore and Key II (seeCompact Selection Guide). Pedestal. Recessed versions also available. 3/16” or 1/4” wire rope. 4) Use #684 stainless keys only. 3 n/a (See Selection Guide below and Price Page for Sizes). 622ST-6 AL 8 (20.3) 6 (15.2) 14 (6.4) 802-8 to 35 33⁄8 (8.6) 15.2 cm17 (43.2) 14.6 x 8.3 cm 18.4 cm 3⁄8 (.95) 8 mm 16 mm 1.82 Kg 2,268 Kg 3628 Kg 4”-20QUADRANT stainless boltsWire andGUIDE nutsCompact are supplied and must – beOrder installedSingle 5) 1⁄bORE 3 ExTRA ExTRA LARGE ORDERING 6 (15.2) (7.3) 802-10 36-41 10 (25.4) 1 3 4” Cross Idler 712AL-FL-4AL ⁄4” 51⁄4” 3⁄8 (.95) 1⁄16 4” ⁄8” 9.5 lbs 13.1 lbs 10,000 lbs 15,000 lbs 8” 21 (53.3)53⁄4” x43⁄38 (11.1) Boat Quadrant Piloton the Max outside Max of the radius. in the holes Hub supplied (*)12 (30.5) 7 (17.8) ⁄8 (.95) 23.5 (10.7) 802-12 622ST-8 42-48 25 (63.5) 4 ⁄8 (11.1) Order # Material Size Radius Height Bore Dia Bore Dia Keyway Weight WIRE TENSIONING kIT 20.3 cm 14.6 x 8.3 cm 13.3 cm 6 mm 10 mm 4.3 Kg 6.9 Kg 4,536 Kg 6,800 Kg 6) L.O.A. For additional Drive instructions, Edson in6” (cm) Cross in (cm)Radial in (cm) in (cm)installation in (cm) lbs (kg) Wire Compact Idlersee – Order 712AL-FL-6AL* Racing/Cruising NOTE: Selection Guide is to be used with specific recommendations approved by your naval5 architect. Length of Diameter of Length of Each 5 Extra Large 835BR-14 Bronze 45-55 14 (35.6) Installation 2 ⁄ (6.4) 3 ⁄ (8.9) 5 (12.7) ⁄ (1.3) 25 (11.3) Steering Guide. ORDERING GUIDE 71⁄4” ⁄16” ⁄8” 11.0 lbs 18.1 lbs Roller Chain 10,000 lbs Connector 15,000 lbs 10” 53⁄4” x 31⁄4” Type Quadrant 3 ⁄ Idlers (8.9) 5 (12.7)compatible ⁄ (1.3) 12 (5.4) 835AL-14 Aluminum 45-55 14(Compact (35.6) 2 ⁄ (6.4) ONLY withBore476 pedestals) 622ST-10 (*) Chain Wire S.S. Wire Rope Order # Crossed-Wire Idler #835BR 25.4cm 14.6 x 8.3 cm 18.4 cm 8 mm 16 mm 5.0 Kg 8.2 Kg 5 Size 4,536 Kg 6,800 Kg 4” Compact 3 ⁄ (8.9) 5 (12.7) ⁄ (1.3) 28 (12.7) 835BR-16 Bronze 50-60 16 (40.6) 2 ⁄ (6.4) 3 Order # Wire Size ⁄8” - #50 Stainless Clevis #736 1.5’/.46 m ⁄16“/5 mm 7’/2 m #774-2S15B7 3 1 1 3 3 ⁄ (8.9) 5 (12.7) ⁄ (1.3) 35 (15.8) 835BR-18 Bronze 55-65 18 (45.7) 2 ⁄ (6.4) ⁄ 4” x 5” 5 ⁄ 4” ⁄ 4” ⁄ 8” 6.55 lbs 4,000 lbs 8,000 lbs 4” 5 #776BR-6AL Crossed-Wire Idler 5 3 3 ⁄ (8.9) 5 (12.7) ⁄ (1.3) 17 (7.7) 835AL-18 Aluminum 55-65 18 (45.7) 2 ⁄ (6.4) n/a 626ST-4 AL ⁄8” - #501,814 KgStainless Clevis #736 1.5’/.46 m ⁄16“/5 mm 9’/2.75 m #774-2S15B9 773-187 3/16” 1.508.995.9711 10.2 cm 14.6 x 12.7 cm 13.3 cm 6 mm 1063 mm 2.98 Kg 3,628 Kg 3 ⁄ (8.9) 5 (12.7) ⁄ (1.3) 40 (18.1) 835BR-20 Bronze 60-75 20 (50.8) 2 ⁄ (6.4) 5 3 (6” shown) Double #713AL-FL ⁄8” - #50 Stainless Clevis #736 1.5’/.46 m ⁄16“/5 mm 13’/4 m #774-2S15B13 Edson Chain and Wire 3 ⁄ (8.9) 5 (12.7) ⁄ (1.3) 49 (22.2) 835BR-24 Bronze 70-90 24 (61) 2 ⁄ (6.4) 5 5 71⁄4” ⁄16” ⁄8” 7.65 lbs 5,000 lbs 8,000 lbs 6” 53⁄4” x 5” 5 3 3 ⁄ (8.9) 5 (12.7) ⁄ (1.3) 21 (9.5) 835AL-24 Aluminum 70-90 24 (61) 2 ⁄ (6.4) n/a 773-250 Rope Kit1/4” ⁄8” - #50 Stainless Clevis #736 2’/.6 m ⁄16“/5 mm 7’/2 m #774-2S2B7 626ST-6 AL 3 ⁄ (8.9) 6 (15.2) ⁄ (1.3) 56 (25.4) 835AL-30 Aluminum 80-100 30 (76.2) 3 ⁄ (9.5) 15.2 cm 14.6 x 12.7 cm 18.4 cm 8 mm 16 mm 3.48 Kg 2,268 Kg 3,628 Kg 5 3 ⁄8” - #50 Stainless Clevis #736 2’/.6 m ⁄16“/5 mm 9’/2.75 m #774-2S2B9 3 ⁄ (8.9) 6 (15.2) ⁄ (1.3) 73 (33.1) 835AL-36 Aluminum 90-120 36 (91.4) 3 ⁄ (9.5) Custom quadrants in aluminum and bronze available. #774 * specify AL (aluminum) or BR (bronze). 6” Sheave available with bronze oilite or stainless needle bearing see price page. 5 3 Note: When specifying a square bore in a quadrant, please note that the maximum bore dimension is ⁄ ” (1.3 cm) smaller. ⁄8” - #50 Stainless Clevis #736 2’/.6 m ⁄16“/5 mm 13’/4 m #774-2S2B13 1

2

ORDERING INFORmATION FITTINGS SpECIFICATION

CHAIN AND WIRE kIT ORDERING GUIDE

1 1 1 1 1 1 1 1 3

2 2 2 2 2 2 2 2 4

1 1 1 1 1 1 1 1 1

2 2 2 2 2 2 2 2 2

1 1 1 1 1 1 1 1 1

2 2 2 2 2 2

2 2

Stainless Bulkhead Steerer Needle Bearing Shelf Steerers WARNING! Larger steering wheel diameters impart higher loads on the complete steering system. All components 3

4

1

2

1

Chain and Wire Rope Kits

2

2

including chain,Wire wire Rope Tensioning Kits ⁄ ” - #50 Stainless Adapter #635 2’/.6 m ⁄ “/6.4 mm 9’/2.75 m and idlers should be up-sized. Adjustable sheave uprights must be locked in place with supplied bolts⁄ ”and after installation. - #50 nuts Stainless Adapter #635 2’/.6 m ⁄ “/6.4 mm 26’/8 m www.edsonmarine.com ⁄ ” - #50 Stainless Adapter #635 2.5’/.75 m ⁄ “/6.4 mm 9’/2.75 m www.edsonmarine.com 60 1 2

5 5

64

5

8 8

Chain, Wire Rope and Fittings 1 1

4 4 4

#774-2B2D9 #774-2B2D26 #774-2B25D9 #774-2B25D26

4” Idlers

1 3 1

3

4

3 1 3

1

25.40 10000 lbs

1.6

.

Chain Size Inches mm

Order #

4

632-80

1

1

632-40

.

.

Breaking Strength

12.70 19.05

2600 lbs 6800 lbs

25.40

10000 lbs

15.87

4700 lbs

8 4

Order #

8

633-40

Roller Chain

Length of

Connector Type

Rollerbearing Chain - see Size Chainprice page. Order # * NOTE: 6” Sheaves available with bronze oilite or stainless needle ⁄ ” - #50 Stainless Clevis#630 #736 1.5’/.46 m #886-2S15

Edson Chain Kit #886

⁄8” - #50 5 ⁄8” - #50 5 ⁄8” - #50

Stainless Clevis #736 Stainless Adapter #635 Stainless Adapter #635

2’/.61 m 2’/.61 m 2.5’/.76 m

#886-2S2 #886-2B2 #886-2B25 61

Master Link #632

Heavy Duty Chain Adapter #635B

Stainless Clevis #736 Stainless Clevis #736 Stainless Clevis #736 Stainless Adapter #635 Stainless Adapter #635

Length of Wire Order # ⁄16“/5 mm 7’/2 m #885-SB7 ⁄16“/5 mm 9’/2.75 m #885-SB9 3 ⁄16“/5 mm #885-SB13 Figure13’/4 1 m 1 ⁄4“/6.4 mm 9’/2.75 m #885-BD9 Consists of the standard Edson 1 ⁄4“/6.4 mm 26’/8 m #885-BD26

⁄2 5 ⁄8 3 ⁄4 1

Te 633-60 ch Tip

Breaking Strength

12.70

2800 lbs

15.87

4450 lbs

19.05

6000 lbs

#634 STAINLESS WIRE ROPE

Measuring Roller Chain

Diameter Type Roller Chain is measured from Breaking # Inches mm Strength Construc pin-center toOrder pin-center along its 3 634-187 ⁄ 16 4.76 2900 lbs 7x19 length. Common Sizes used on 1 ⁄4 6.35 4900 lbs 7x19 634-250 boat steering systems5 are 1/2” 634-312 ⁄16 8.00 7600 lbs 7x19 Stainless Thimble (#40), 5/8” (#50), 3/4” (#60) and 1” (#80). These sizes are usually #643 stamped on the side the chain #635of HEAVY DUTY CHAIN ADAPTER Edson Wire Rope Kit links. #885 Chain Size Tested Max. Wi

Wire Rope #634

Wire Rope Diameter of #634 S.S. Wire Rope

Chain Size Inches mm

633-50

Roller Chain #630

8

WIRE kIT ORDERING GUIDE

Vision II™ Pedestal Vision II™ Pedestal

#633 STAINLESS ROLLER CHAIN HALF LIN

4

Connector Type

Order # Inches mm

3

⁄8 ⁄4

Strength

Rope Siz

⁄4 6.35 ⁄8 9.52 ⁄8 9.52

635ST-50

5

15.87

5000 lbs

1

635BR-60

3

19.05

7000 lbs

3

9000 lbs

3

635BR-80

3

1

25.40

Figure 2 Consists of the standard Edson assembly of a Roller Chain and Wire assembly of a Roller Chain and Wire #643 STAINLESS THIMBLES Rope Kit when using 5/8” #50, 3/4” Rope Kit when using 5/8” #50 Roller Thimble Size Max Wire Max Lo #60 or 1” #80 Roller Chain with 1/4” Custom Chain Chain and Wire Kits(4.8mm) Wire Rope. with 3/16” Order # Inches mm Rope Size Ratin (6.35mm) Edson can custom build Chain & Wire Kits, Chain Kits or Wire Kits or 5/16” (8.0mm) Wire Rope. 3 ⁄16 2220 lb W a r n i n g 643-187 3⁄16 4.76 to your specifications. The chart below can be used 3to specify the 1 1 Edson’s Take-Up Eyes accept Wire Rope up to ⁄ 8 ” (9.5mm) in diameter, making adjustment ⁄4 6.35 ⁄4 3660 lb 643-250 correct combination of Chain, Wire and Fittings. 5 5 of steering cableKittension use with Wheels. For safety, Edson recommends replacing643-312 your Chain Custom Chain & Wire - Ordereasy. #774 For - Specify Sizeboth Quadrants and Drive ⁄16 8.00 ⁄16 4560 lb Custom Chain Kit - Order Product #886 - Specify Size and Wire Kit every 5 years. Clean it up, inspect it and if 2 Nuts Locked TAkE-Up EYE Custom Wire Kit - Order Together Product #885 - Specify Size it is in good working condition, keep it on board for an WIRE ROPE CLAM #665ST STAINLESS

ORDERING GUIDE

CUSTOm CHAIN AND WIRE kIT SIZE SELECTION GUIDE

emergency backup. Clamp Size Max Load Order # Wire Size Bolt Dia. # Inches mm Rating On all boats, especially those in Charter Order Service or sailing 618-1-312 3/16”, 1/4” 5/16” 3 ⁄16 4.76 3120 lbs in the tropics, the chain and wire MUST665ST-187 be lubricated 618-2-375 1/4”, 5/16” 3/8” 1 ⁄4 and 6.35 5280 lbs 665ST-250 and inspected monthly. The effects of sun, saltwater 618-0-250 3/16” 1/4” 5 ⁄16 8.00 7600 lbs inexperienced users can be severe and 665ST-312 must be compensated Non-Working for by increased inspection and maintenance schedules.

Min Cla per sid

AUTOPILOT TILLER ARM ADAPTERS Roller Chain Size 1 = 1⁄2 in # 40

Autopilot Tiller Arm Adapters

2 = 5⁄8 in #50

3 = 3⁄4 in # 60

Connector Type

Length of Chain 15 = 1.5 ft

S = #736 SS Clevis 2 = 2 ft #618 Take-Up Eye B = #635 Heavy Duty Adapter 25 = 2.5 ft

Diameter of S. S. Wire Rope B = 3⁄16” Dia

Length of Each#665 Wire Wire Rope Clamps

D = 1⁄4” Dia

in Feet

E = 5⁄16” Dia

2 2 3

*Working End Compass Chain Sprocket No of Weight End (dead) Example: If you need a 1 ⁄ ’ section of #50 chain and two 7’ pieces of 3/16” #730 NICO PRESS FITTINGS - INSTALL (live) wire rope, Chain Size Sprocket Pitch No of TeethWeight lbs you Pedestal Type Order # Compass Size kgwould order #774-2S15B7. 2=5/8” Chain, S=Stainless Clevis, B=3/16” WIre (For fittings only - see price list #747 Rope, 7=Two lengths of 7’ wire Pedestal Type Order # Size Size Pitch Teeth lbs • Specifically designed for use with linear drive autopilot systems. kg 5 Size Wire Tested Streng Bronze Tiller Arms Edson’s Stainless Wire Rope Clamps are used to secure the end of the wire rope after it goes ⁄8 2.2” 11 15 6.8 6-7/8” Top Diameter 336-5-211T* 5” 5 Order # Inches mm Rope Using only 1 Fit 5 6.815 6-7/8” Top Diameter 336-5-211T* 336-5-215T* 5” 5” 5⁄8 ⁄8 2.2” 3.0” 11 15 15 • Keeps Autopilot independent of Steering System. 6.8 through the Take-Up Eye on Quadrants and Drive Wheels. Two each are required for each take-up ⁄ 4.76 ⁄ 2900 lbs 730-187 3 3.0” 336-5-215T* 5” 6.858 www.edsonmarine.com 336-5-310T 5” 3⁄8 ⁄4 2.4” 15 10 15 • Makes Autopilot an “Electronic Emergency Tiller” 16 7.3 eye, or four total for a steering installation. ⁄ 6.35 ⁄ 5000 lbs 730-250 5 2.4” 336-5-310T 7.316 8” Top Diameter 402-6-211T* 5” 6” 5⁄4 ⁄8 2.2” 10 11 16 • Available in 10” (254 mm) and 15” (381 mm) lengths for use with 7.3 ROpE CLAmp ⁄ 8.00 ⁄ 7600 lbs 730-312 5 2.2” 8”• Top Diameter designed402-6-211T* 6” drive ⁄ 8 11 16 most 7.316of the7.3 autopilots on the market today.for racing boats where weightWIRE Specifically for use with linear autopilot systems. • Designed savings is 402-6-215T 6” ⁄ 8 3.0” 15 Te c h T i p Specifica ORDERING GUIDE 5 1 3 402-6-215T 6” 7.317 ⁄2 ” or 12 mm lly desig 402-6-310T 6” 3⁄8 ⁄4 3.0” 2.4” 15 10 16 • 1” (25 mm) wide slot to accept ball end fitted with 7.7 • ned for uindependent Stainless #736 STAINLESS ROLLER CHAIN CLEV a Wire Rope clamp, ps AutopAutopilot • KeeKeeps of Steering System. critical. 6” ⁄4 10 17 diameter 7.7 pins. * When fastening se402-6-310T with line476-211T* 5⁄8 2.4” ilo 2.2” 11 58 26 “Never saddle a dead horse.” Always II -t iCompact 4” or 5”5 • MakesVision Wire Size Order # ndepen Base Size Breaking Max. Wi ar drive • Accommodates rudderposts to 5” (127cm). dent476-211T* A 5 2.2” utop aut ⁄ 8 11 58 26 Vision II Compact Base 4” or 5” o Order # Inches mm Strength Rope Siz f S op ilo (see ImpORTANT 476-215T 4” or 5” ⁄ 8 3.0” 15 58 26 Makes Autopilot an “Electronic Emergency Tiller” • Solid Cast Aluminium Construction 3/16” 665ST-187 te t a ilo • • ering Sy A ilabl n “Ele put the open/saddle side of the clamp ystems. 5⁄8 3 3.0” stem. 4” ort s5” e in 1 (seeva ImpORTANT 15 58 • Custom pin sizes are available upon request. 2659 ⁄ 15.87 3500 lbs ⁄ 4.76 736-50 5” c Emerge476-310T note below) 4” or ⁄ 4 2.4” 10 26.5 0” (254 ctroni476-215T 1/4” 665ST-250 m 3 on the side of the wire that is working os • Constructed of Manganese Bronze or Anodized Aluminum. ncy mm) a t of the au 5 2.4” • below) Available in 10″ (254 and 15″4” (381 mm) the • Black Hard-Cote Anodized for durability 5/16” note 476-310T or 5” 4” 10 most 26.5 Tiller” nd Series 490-MV-211T* or 5”⁄4lengths ⁄8 for use 2.2”with 11 59of • Variable attachment points to allow for proper positioning of the 58 26 or “live.” 15”mm) to pilots -MV • 1” (25 Vision 665ST-312 (381 5 2.2” on the m490-MV-211T* mm) len 4” or 5” 4” or 5”5⁄8 Vision Series 2658 mm) w-MV ⁄3 8 3.0” 11 15 58 attachment 26point of the arket to 490-MV-215T gt ide slot hs 5 on the market today. • For rudderposts up to 7″ (175mm) in diameter diamautopilots fo autopilot. day. to accep 490-MV-215T 4” orr u 5”se4” 2659 eter • Specifically designed for use with linear drive autopilot systems. with ⁄4 3.0” Bronze 2.4” 15Aluminum 10 58 Tiller or 5”3⁄8 Tiller Arms t ball end 490-MV-310T Aluminum Tiller Arms • Accom pins. Arms26. 5 2.4” 490-MV-310T 4” or 5” 4” 10 diameter 26.60 tted with ball • Keeps Autopilot independent of Steering System. ⁄8 or 122.2” 11 59 pins. 27 -MA slot 490-MA-211T* or 5”5⁄4with 1⁄2″ od • 1″mVision (25 wide to fiaccept end fitted mm atesmm) 1⁄2 ”4” rSeries • Vision udderpos oror CustomSeries • Designed for racing boats where weight savings is critical. 5 2.2” • Designed for racing boats where weight savings is critical. 1.508.995.9711 125”mm ⁄ 8 11 60 27 -MA 490-MA-211T* • Makes Autopilot an “Electronic Emergency Tiller” 490-MA-215T 4” or 5” ⁄ 8 3.0” 15 60 27 pin sizes ts 15” (381 mm) to 5” (1 • Solid Cast Aluminum Construction • Con are ava 3 3.0” • Solid Cast Aluminum Construction 27cm 490-MA-215T or 5” 4” or 5”5⁄8 2762 • struAccommodates to 5″4”(127cm). 490-MA-310T ⁄4 2.4” 15 • Black Hard-Cote Anodized for durability 10 60 28 Autopilot Tiller Arm• Available in 10” (254 mm) and 15” (381 mm) lengths for use with ). ila rudderposts ct 3 on requ • Variab ed of Mangane ble up #926BR-15 • Black Hard-Cote Anodized for durability 490-MA-310T 4” or 5” ⁄ 4 2.4” 10 62 28 es le se most of the autopilots on the market today. t. • For rudderposts up to 7” (175mm) in diameter. *Standard sprocket size unless otherwiseupon requested attachm pin Bro Custom sizes are available request. nz e or A • For rudderposts up to 7” (175mm) in diameter. ent p a tta• *Standard sprocket size unless otherwise noavailable chmenStraight oint direquested • 1” (25 mm) wide slot to accept ball end fitted with 1⁄2 ” or 12 mm zed Aluon special order. Contact Edson Customer Service. Wheel Shafts are still s to allo t point of morder. w for pron special inumorContact Straight Wheel Shafts are available Edson Customer Service. the au 15” (381mm) • Constructed oftostill Manganese Anodized Aluminium. diameter pins. operBronze pi position . lot. Autopilot Tiller Arm in of theUpdated Design! • Accommodates rudderposts to 5” (127cm). #926AL-15 • Variable attachment points to allow gfor proper positioning the attachment • Wider jaw acceptsof more • Custom pin sizes are available upon request. 15” (381 mm) autopilot rams. Autothe point of • Constructed of Manganese Bronze or Anodized Aluminum. pilot Tilautopilot. ler #926BR-1 Arm • Variable attachment points to allow for proper positioning of the • Stronger 10” (254 mm) 5 1

Classic Series Vision Series

Vision Series

Classic Series

Adapt ers Bronze Tiller Arms

2

Aluminium Tiller Arms

3

Autopilot Tiller Arm Adapters

Autopilot Tiller Arm #926AL-10

16

1

5

4

16

5

8

3

16

1

5

4

16

3

16

attachment point of the autopilot.

Important!

New Updated Design! ALUmINUm TILLER ARm ORDERING GUIDE Edson highly recommends installing an autopilot independent of 15” (381 mm) G O• T OWider jawsteering accepts more autopilot rams. the primary system. This provides for a redundant/backup Autopilot Tiller ⁄ Arm ⁄ system in the event of steering gear or cable failure—in effect an See Tech Tip on page 65 for information on securing ⁄ ⁄ #926BR-15 • Stronger 10” (254 mm) “Electronic Emergency Tiller”. Edson’s Autopilot Tiller Arm allows the ⁄ ⁄ Tiller Arm to Ruddershaft and request Engineering

Tiller Arm Length Pilot Bore Max Bore ORDER # inches mm inches cm inches cm 926AL-10-610 10 254 0 0 31 4 8.3 8.3 5 12.7 926AL-10-14 10 254 31 4 8.3 926AL-15-610 15 381 0 0 31 4 Autopilot Tiller Arm autopilot to be mounted independently steering 8.3 5 system 12.7 926AL-15-14 15 of the 381primary 31⁄4 #926BR-10 Bulletin #373-97-2 “Tiller Arm Worksheet”. and should be used to attach an autopilot to381 the rudderpost. 926AL-15-57 15 5 12.5 7 17.5

Max Size Keyway inches cm 1 2 1.3 5 8 1.6 1 2 1.3 5 ⁄8 1.6 3 ⁄8 1

Weight Each kg 1.9 2.5 2.7 3.4 5.9

lbs 4.2 5.6 6 7.6 13

10” (254 mm) Autopilot Tiller Arm #926AL-10

GO TO

See Tech Tip on page 65 for information on securing Updated Design! IN NO CASE SHOULD THE AUTOPILOT BE ATTACHED DIRECTLY TO Tiller Arm to Ruddershaft and request Engineering Importa Catalogue 2013/JAN / © So-Pac Marine Limited • Wider jaw more Autopilot Tilleraccepts Arms for J-Boats THE QUADRANT OR RADIAL DRIVE WHEEL! Equipment Edson hi nt! ghly reco Bulletin #373-97-2 “Tiller Arm Worksheet”. the prim autopilot rams. www.sopac.co.nz ar y steer mmendsPhone Because of/their unique rudderpost shape, J-Boats require a specially shaped tiller arm. It is designed to installin 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz in system g an au clamp onto the fiberglass rudderpost directly above the Radial Drive Wheel. For J-Boats from 35’ to 53’. in the ev g system. This bRONZE TILLER ARm ORDERING GUIDE • Stronger provides topilot independ ent of ste “Electro Wt. 5.8 lbs (2.6 kg). Edson Tiller Arms are now available in Bronze and fo ni en er NOTE: Pilot Bore of “0” = solid casting - no pre-bored hole.

mm) ller Arm -10

.

630-80

632-60

Consists of one length of the specified length of wire, preassembled and nico#736 Press pressed together with the thimble and chain adapter as shown, Nico as well as Stainless Thimble one length of shrink wrap to cover the chain-to-wire connection. TwoFitting lengths #643 #730 Nico Press required per steering installation. Fitting Wire Rope Kit - Order #885 - Specify Size (See Selection Guide #730 below and Price Page for Sizes)

ng a a pecify y el that t g. This s t the e shaft t o your r

.9

632-50

Edson’s Wire Rope Kit Stainless Clevis

er Arm

.6

19.05 7000 lbs

8

1.508.995.9711

nt!

.4

15.87 5000 lbs

3

4

5

EERING STEERING pEDESTAL SELECTION GUIDE pEDESTAL SELECTION GUIDE

⁄2 ⁄8 ⁄4

12.70 2800 lbs

5

630-60

⁄2 5 ⁄8 3 ⁄4

5

Classic Series Pedestal Classic Series Pedestal

1

630-50

8

1

All Edson Idlers now come standard with Sheave Guards!

1

8

630-40

#632 STAINLESS MASTER LINK

⁄ ” - #50 Stainless Adapter #635 2.5’/.75 m ⁄ “/6.4 mm 26’/8 m IDLER SpECIFICATIONS AND ORDERING GUIDEin each chain on preassembled * A masterChain link is centered and Wire arekits. specified and connected in several different Boat Idler Size Dia Wire Max Width Max Depth Weight configurations, on the rudderloads that the boat will experience. Part No. Length in(cm) in(cm) in(cm) in(cm) depending lbs(kg) Edson’s Chain Kit5.0 (12.7) 711AL-4AL to 36’ 4 (10.2) to ⁄ (.64) 9.5 (24.1) (2.9) 25’– 42’ (7.6m –12.8m) range see rudder loads that boats in 6.5of the ConsistsTypically, of the specified length chain, two chain-to-wire adapters and 13 (33.0) 7.25 (18.4) 9.0 (4.1) 711AL-6AL 37’-44’ 6 (15.2) to ⁄ (.95) require 3/16” wire rope andadapters. 5/8” Roller two lengths of shrink wraporto 1/4” cover the chain-to-wire When Chain and are connected 711BR-4AL to 36’ 4 (10.2) to ⁄ (.64) 9.5 (24.1) 6.0 (15.2) 8.0 (3.6) ordering, please note the size of wire which the is being with astoshown in chain Figure 1. attached 711BR-6AL 35’-48’ 6 (15.2) ⁄ (.95) 9.5 (24.1)a stainless 7.5 (19.0) clevis 13.0 (5.9) so that we can provide the proper sized end fittings. 776AL-4AL to 36’ 4 (10.2) to ⁄ (.64) 8.25 5.0 (12.7) 7.0 (3.2) rudder loads often require 1/4” or 5/16” wire rope and Larger higher Chain Kit -(21.0) Orderboats #886 -with Specify Size 776AL-6AL 37’-44’ 6 (15.2) to ⁄ (.95) 12.5 (31.8) 7.25 (18.4) 9.5 (4.3) (See Selection andconnected Price Page for Sizes) 3/4” Guide roller6.0below chain, with a Heavy Duty Stainless or Bronze Adapter as 9.5 (24.1) (15.2) 8.0 (3.6) 776BR-4AL to 36’ 4 (10.2) to ⁄ (.64) shown in Figure 2. 13.0 (5.9) 776BR-6AL 35’-48’ 6 (15.2) to ⁄ (.95) (24.1)ORDERING 7.5 (19.0)GUIDE CHAIN9.5 kIT 5

6” Idlers

8

1

#630 STAINLESS ROLLER CHAIN

Size Breaking Weight Pe Order # Inches mm Strength Lbs k

r a du c Emer Vision au II toCompact Vision “MV” Vision “MA” t of ing gear TillerJ-105, Arm J-120, & J-130 - Order #836AL-J-12 Max Size Weight Autopilot Tiller Arm for J-37, J-40, J-42, J-44, J-46, ndan or cable reVision Anodized Aluminum. pilot to be gency Tiller”. Vision II Compact “MV” Vision “MA” Length Pilot Bore Max Bore Keyway Each up failure— t/back Edso Autopilot Tiller Arm for J-160 - Order #836AL-J-160 mounted Important! Tiller Arms for J-Boats and sh in Order ORDER # inches mm inches cm inches cm inches cm lbs Autopilot kg Bronze - used for cruising boats and boats with effect an #490-MV Order #476 Order #490-MA independ n’s Autopilot Til ould be ler Ar used ently Tiller Arms are available for all J-Boats. Use #926AL if your boat is not listed. Contact Edson for more information if yours is not shown. 1

1

ALUmINU Tiller Arm Length ORDER # inches mm 926AL-10-610 10 254 926AL-10-14 10 254 926AL-15-610 15 381 926AL-15-14 15 381 926AL-15-57 15 381

85

inc

3

3

NOTE: Pilot Bore of “0” = solid ca


BOAT OPERATING EQUIPMENT

YACHT PEDESTALS Steering Pedestal Options The Vision Series™ • Three styles to choose from. • Allows Mounting of Engine Controls, Instrumentation and many Electronics Right in the Console. • Fiberglass Console Head with Extruded Aluminum Column. • Available in CD-i Geared or Chain & Wire. • Convenient Thru-Shaft Wheel Brake. • Removable Head with Waterproof Gasket for Easy Service. • Durable White Linear Urethane Coating on Aluminum Column. • Integral 20” Guard Pipe. • Optional Compass Bowl available. • Single-Lever Engine Control included. • Smooth Surface Design — No Mounting Bolts Showing.

The new Vision II Pedestal* (10.5” x 8.5” base) Optional Compass & Bowl shown

• Removable faceplates for easy instrument mounting and replacement.

Engine Control Included! The Morse SingleLever Engine Control (#910-SL3-Taper) comes preinstalled in the pedestal, ready to be attached to the engine control cables.

The Vision Series “MV” Pedestal (10.5” x 14” base)

The Vision Series “MA” Pedestal (10.5” x 14” base) Optional Compass & Bowl shown

Vision II Pedestal Wheel Pilot Installation Kit Edson’s Wheel Pilot Installation Kit allows you to mount a Raymarine wheel mounted autopilot on an Edson Vision II (#476) Console Pedestal. It comes complete with all the necessary parts required for the installation, including fasteners and touch-up paint. Edson Wheel Pilot Installation Kit - Order #925-426V Vision Series Pedestal on Fontaine 65 built by Dana Robes Boatbuilders, Round Pond , ME. photo courtesy of mast Supplier Composite Solutions, Hingham, mA

48

86

* Vision II Pedestal available in Chain and Wire version only. Faceplate dimension: 11-1/4” x 8-1/8” (285mm x 206mm) - mounting surface slightly less.

www.edsonmarine.com

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT OPERATING EQUIPMENT

The Classic Series • Classic Yacht Design Increases Usable Cockpit Space. • Convenient Thru-Shaft Wheel Brake. • Available in CD-i Geared or Chain & Wire. • For Sailboats from 22’ (6.7 m) and up. • Durable Glossy White Baked-on Urethane Finish. • Stainless Wheel Shafts and Sprockets.** • Three Guard Styles Available. • Stainless Needle Bearings. • Large Selection of Edson Accessories such as Pedestal Guards, Instrument Housings, Drink Holders and Tables. • Stainless Wheel Nut Included. • All Non-Magnetic Construction. • Hex Head Recesses in Base hold Edson’s Aluminum Bolts for Easy One-Person Installation. • Pedestal Top Pre-Drilled for Compass and Pedestal Guard Top Plates. • Accepts all Styles of Edson Wheels. ** Standard sprocket sizes are stainless, other sizes are brass

CD-i® Geared Steering Systems CD-i® Geared Steering Systems

336 Series Pedestal Edson’s classic Rack and Pinion system utilizes a simple, direct linkage from tiller to wheel. All CDi

• 6 7⁄8“ Diameter Top Geared Steerers feature exceptional feel, easy installation and a wide range of mounting options. • Ideal for Boats from 22’ to 42’ (6.7 m - 12.8 m). • Thru-Shaft Brake Standard. • Fits all compasses up to 5” Card Size. • For boats up to 50’ (15.25m). • Replaces Edson’s #334 & #335 Pedestals • Classic, Vision Series™ and Internal Pedestal designs available. • Available in Chain & Wire Only

402/464 Series Pedestal

• • • •

Large variety of Wheels and Accessories. Highest quality marine-grade Stainless, Bronze and Aluminum components. Tiller-to-wheel conversion kits available. 464 Series Classic Pedestal 336–Series Classic 360º Circular Rack Gear 3 Times thePedestal Life Span of Conventional Rack Gears.

• 8” Diameter Top • Large Diameter Pedestal Top with Triple • 1.8 Wheel Turns Hard-Over to Hard-Over through 72º of rudder travel. Needle Bearings and Stainless Bearing Liners. • Available in Chain & Wire and CDi Geared. • Gleason Coniflex ™ Gears for Ultra-High Strength. • Typically used on boats 40’ and up. • Gear teeth easily accessible for lubrication and inspection. • Thru-Shaft Brake Standard • Wheel Brake with Stainless Knob Included• Large 3¼”/83 mm Torque Tube for Superior Strength, Stiffness. • Fits all compasses up to 6” Card size • Turnbuckle-Style Drag Link for Easy Adjustment. • For use with Windvane Self Steerers

• Large 3½“/89 mm Diameter Stainless Bearings for Long Life. • Designed and Built to ISO Standards. • CE Compliant.

GO TO

• Low Maintenance.

For Geared CD-i Steerer ordering info see pages 50-51. Optional “Vision Series” Housing for Classic Pedestals - See pg. 24

For Chain & Wire Steerer ordering info see pages 52-68. Classic Base Dimensions 14” (5.6 CM) 14"/356mm 6”6"/152mm (15.2 cm)

NOTE: Pedestals shown with optional accessories.

1.508.995.9711 10.5"/267mm

10.5” (26.7 cm)

49

CD-i Below Deck Components

6"/152mm

6” (15.2 cm)

Vision Series Base Dimensions

51⁄4” 5.25"/133mm (13.3 cm) 6"/152mm 6” (15.2 cm)

Installation Requirements Rudder Stops and Edson’s Stop Ring Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

Rudder Stops are a mandatory fitting for any steering arrangement. They insure that loads transmitted through the rudder never exceed the design limit of the steering pedestal and gear. Edson’s Integral Stop Ring/Backing Plate provides an alternative to conventional rudder stops that is much simpler

87


Vision Series Instrument Housing Selection Guide

2.5" Housing with (1) Ball Mount 3" 3" most square Accomodates wind,4-5/8" depth, 5-1/2" 5-1/2" speed instruments and autopilot control heads.

5-1/2"

™ The Vision Series The Vision Series™

4-5/8"

Order #2030-55x55

Replacement Faceplate Order #833-V55 5-1/2" Safely and4-5/8" conveniently mount your instruments right at the helm! 5-1/2" Accomodates most square wind, depth, speed instruments and autopilot control heads. Safely and conveniently mount your instruments right at the helm! Order #2000-55x55 Edson’s new 5-1/2" Side-Mount Arm (shown) Vision Series™ Instrument Housings look great, are Double Housing Order #2010-55x55 Edson’s new Vision Series™ Instrument Housings look great, are Ball Mounts B O A T O P E R A T I N G E Q 2" P M 2" U I E T Housing OnlyNand Order #2000-105x65 Order #2020-55x55 2.5" strong durable and willand keep your instruments, strong durable andsailing will keepand your engine sailing and engine instruments, ceplate Double Housing 2" 2" 5-3/4" Order #2030-55x55 5-3/4" Housing with (1) Side-Mount Arm (shown) Order #2020-105x65 3" 3" • Easily mounts to Pedestal Guards or Consoles. • Easily mounts to Pedestal Guards or Consoles. 4-5/8" 5-1/2" 10-1/2" 3" 10-1/2" Housing Only #2000-105x65 Replacement Faceplate Order #833-V55 autopilot controls, radar and chart displays and otherOrder important 5-3/4" Housing with (2) Ball Mounts Order #2030-105x65 5-3/4" 3" 2" autopilot controls, radar and chart displays and other important 5-3/4" 3" 3" Housing with (1) Side-Mount Arm (shown) Order #2020-105x65 square instruments or one rectangular autopilot control head. 10-1/2" Accomodates most square wind, depth, speed instruments and autopilot controlReplacement 10-1/2" 10-1/2" 5-1/2" Faceplate Order #833-V105 10-1/2" • Angled For Easy Viewing heads. 3" instruments within easy reach and viewing distance of the helmsman. 5-3/4" with (2) Ball Mounts Order #2030-105x65 • Angled For Easy Viewing instruments within easy reach andHousing viewing distance of the helmsman. 10-1/2" 10-1/2" 10-1/2" Replacement Faceplate Order #833-V105 5-1/2"

2.5"

2.5"

2.5"2.5" 3"

3"

4-5/8"

2.5" 3" 3"

4-5/8"

5-1/2"

4-5/8" 4-5/8" 5-1/2"

4-5/8" 5-1/2" 5-1/2"

3"

5-1/2"

2"

3"

2.5" 3"

2"

2" 3" 3"

YACHT PEDESTAL ACCESSORIES

Fits two standard square instruments or one rectangular autopilot control head. • Stainless Trim Ring for Protection

• Stainless Trim Ring for Protection

2" 2" 5-3/4" 3"

3"

Order #2000-105x65 Single Housing 2" 2" Order #2020-105x65 2.5"Housing Only Housing with (1)5-3/4" Clamp-On Mount (shown) 2" 2" 5-3/4" 3" Order #2030-105x65 3" 4-5/8" 3"Housing with (1) Side-Mount Arm 2" 3" Order #833-V105 5-3/4" 3" Housing with (1)5-3/4" Ball Mount

10-1/2" Double Housing 14-1/2" 14-1/2" Housing Only Order #2000-105x65 2" White High-Gloss Thermoformed ABS Housing 5-3/4"• 4-5/8" 3"Housing 4-5/8" with (1) Side-Mount 14-1/2" Arm (shown) Order #2020-105x65 14-1/2" 14-1/2" 14-1/2" Housing with (2) Ball Mounts Order #2030-105x65 5-3/4" 4-5/8" 3" 4-5/8" 4-5/8" 2.5" 4-5/8" 14-1/2" 14-1/2" • Instruments mount to#833-V105 removable faceplate for 14-1/2" Replacement Faceplate Order 10-1/2"

2"

5-3/4" 4-5/8" 5-3/4" 5-3/4"

10-1/2" 5-1/2" 10-1/2" 5-3/4" 10-1/2" 10-1/2"

• White High-Gloss Thermoformed ABS Housing The Vision Series™ Order #2000-15x55 3"

Fits two standard square instruments or one rectangular autopilot control head.

4-5/8" 4-5/8" Triple Housing 4-5/8" 3" 14-1/2" 10-1/2" easy service. 10-1/2" Fits twoInstrument standard square instruments or one look rectangular autopilotare control head. Edson’s new Vision Series™ Housings great, strong and durable and will 4-5/8" Housing Only4-5/8" OrderTriple #2000-15x55 Housing 3" 5-1/2" • Mounts Instruments mount to removable faceplate for 14-1/2" Clamp-On (shown) Order #2010-15x55 14-1/2" keep your sailing and engine instruments, autopilot controls, radar and chart displays and Housing Only Order #2000-15x55 • UV resistant - won’t fade or crack. 5-3/4" 5-1/2" 3" 4-5/8" 4-5/8" 14-1/2" Ball Mounts 14-1/2"Order #2030-15x55 Housing with (2) Clamp-On Mounts (shown) Order #2010-15x55 20-3/8" other important instruments within easy reach and viewing distance of the helmsman. 20-3/8" easy service. 4-5/8" 2.5" 4-5/8" with (2) Clamp-On Mounts (shown) Order #2010-15x55 4-5/8" 4-5/8" • Housing with (2) Ball Guards Mounts20-3/8" 20-3/8" OrderHousing #2030-15x55 14-1/2" to 1”, 1-1/8” or 1-1/4” Mounts Pedestal 14-1/2" Order #833-V15 eplate 10-1/2" 20-3/8" Easily mounts to Pedestal Guards or Consoles. 20-3/8" 4-5/8" 4-5/8" 4-5/8" • 4-5/8" with (2) Ball Mounts Order #2030-15x55 4-5/8" Triple Housing 3" Replacement Faceplate 14-1/2" OrderHousing #833-V15 4-5/8" Perfect for most popular 3 sail instrument bundles. 4-5/8" 20-3/8" 20-3/8" 4-5/8" 2" Housing Only Order #2000-15x55 Replacement Faceplate Order #833-V15 4-5/8" • Weatherproof 20-3/8" • UV resistant - won’t fade or crack. 4-5/8" • Angled For Easy Viewing Perfect for most popular 3 sail instrument bundles. 5-1/2" 2" 4-5/8" 20-3/8" Perfect for most popular 3 sail instrument bundles. 5-3/4" 3" Protection 4-5/8" • Stainless Trim Ring for Housing with (2) Clamp-On Mounts (shown) Order #2010-15x55 20-3/8" 20-3/8" 5-3/4" • Fits Straight, Angled and Offset Guards. 3" 4-5/8" Housing with (2) Ball Mounts Order #2030-15x55 14-1/2" •4-5/8" 4-5/8" Mounts to 1”, 1-1/8” or 1-1/4” 20-3/8" • White High-Gloss Thermoformed ABSPedestal Housing Guards 20-3/8" Replacement Faceplate 10-1/2" Order #833-V15 4-5/8" G O T O 4-5/8" GO TO 2" Conceals and protects instrument wiring. 10-1/2" 20-3/8"mount 2.5" Perfectfor for most popular 3 sail instrument bundles. • Instruments to removable •faceplate easy service. GO TO 4-5/8" 2.5" 5-3/4" 20-3/8" 3" • SeeWeatherproof Pages 72 for our new larger See Pages 20-3/8" 72 for our new larger • UV resistant - won’t 3"fade or4-5/8" crack.• 4-5/8" Multiple mounting options for maximum See Pages 72 for our new larger 4-5/8" 4-5/8" 3" 3.25" 3.25" diameter guard pipes. diameter guard pipes. 3.25" 3.25" 10-1/2" diameter guard pipes. • Mounts to 1″, 1-1/8″3.25" or 1-1/4″ Pedestal Guards G O T O versatility. 5-1/2" Now more room for wiring! 2.5" 5-1/2" 3.25" room for wiring! and Offset Guards. 3.25" Now more room for wiring! 3.25" • Now Fits more Straight, Angled 14-1/2" 20-3/8" • Weatherproof 14-1/2" See8-3/4"" Pages 72 for our new larger 4-5/8" 5.5" 5.5" 4-5/8" 3" 3.25" Beveled housing design additional 5.5"allows 4-5/8" • 8-3/4"" 5.5" for 4-5/8" 8-3/4"" 8-3/4"" 3.25" 5" 3.25" diameter guard pipes. • 5-1/2" Fits Straight, Angled and Offset Guards. 5.5"5.5" 8-3/4"" 5.5"5.5" room for plugroom andforwiring. 8-3/4"" 8-3/4"" 3.25" 8-3/4"" Now more wiring! Quad 3.25" Housing • Conceals protects instrument wiring. Quad Housing 14-1/2"and • Conceals and protects instrument wiring. 5.5" 5.5" 8-3/4"" 8-3/4"" 2" 5.5" 8-3/4"" 3.25" Housing Order #2000-205x55 2" 5.5" Only 8-3/4"" 4-5/8" Housing Only Order #2000-205x55 9.5" 9.5" 9.5" 9.5" Order #2000-205x55 5.5"5.5" • Multiple mounting options for maximum versatility. 8-3/4"" Housing with (2) Clamp-On Mounts (shown) Order #2010-205x55 8-3/4"" Housing with (2) Clamp-On Mounts (shown) Order #2010-205x55 5-3/4" 5-3/4" 3"Quad Housing 3" 9.5" 9.5" • Multiple mounting options for maximum 9.5" 9.5" Clamp-On Mounts (shown) Order #2010-205x55 Housing with (2) Ball Mounts Order #2030-205x55 Housing with (2) Ball Mounts Order #2030-205x55 5.5" 2" 8-3/4"" housing 3.25" Housing Only for additional room for Order #2000-205x55 • Beveled design allows 3.25" 9.5" 9.5" Ball Mounts versatility. Order #2030-205x55 9.5" Replacement Faceplate Order #833-V205 9.5" Replacement Faceplate Order #833-V205 Housing with (2) Clamp-On Mounts (shown) Order #2010-205x55 5-3/4" 10-1/2" 3" 10-1/2" 20-3/8" 9.5" 20-3/8" plug and wiring. 9.5" Ideal for 4 square sailing instrument packages. Ideal for 4 square sailing instrument packages. Housing with (2) Ball Mounts Order #2030-205x55 ceplate Order #833-V205 4-5/8" 4-5/8"

2.5"

2"

4-5/8"

3.25"

9.5" 5.5"Replacement Faceplate Ideal for 410-1/2" square sailing 20-3/8"instrument packages.

Order #833-V2055.5"

8-3/4""

8-3/4""

• Beveled8-3/4"" housing design allows for additional variety of mounting Optional Mounting Hardware roomLarge for plug and wiring. Clamp-On U-Mount 9.5" Clamp-On Mount options and assessories!

Optional Mounting Hardware Optional Mounting Hardware Ideal for 4 square sailing instrument packages.

4-5/8"

5.5"

l Mount Clamp-On Mount for 1” Guard & 1-1/8 Guard Pipes 1-1/4” Pipes 4-5/8" ST-BALL #861-100

4-5/8"

Ball Mount

8-3/4""20-3/8"

5.5"

4-5/8"

9.5"

1.508.995.9711

8-3/4""20-3/8"

5.5"

8-3/4""20-3/8"

4-5/8"

23

9.5"

1.508.995.9711

9.5"

1.508.995.9711

23

23

3.25"

3.25"

8-3/4""

5.5"

Large Variety of 8-3/4"" Mounting Options!

3.25"

9.5"

5.5"

5.5"

8-3/4""

9.5"

9.5"

Cockpit Tables

www.edsonmarine.com

22

Edson’s Cockpit Tables increase the versatility of your Edson Pedestal and turn the cockpit into the social centre of your boat. The many different styles available are all constructed of Solid Teak or White Poly and come complete with stainless mounting hardware. Edson’s Cockpit Tables have earned the reputation as the highest quality, best built tables on the market!

Large Variety of Mounting Options!

Drink Holders Built from high quality materials, Edson’s attention to detail make these holders functional, strong and look great on any boat.

www.edsonmarine.com

Polyethylene Cast from solid marine grade 316 stainless

88

Side Mount Arm 1”, 1-1/8” & 1-1/4” Guard Pipes #831ST-100

3.25"

3.25"

3.25"

5.5"

Side Mount Arm

Ball Mount Clamp-On U-Mount 9.5" Clamp-On Mount for 1”, 1-1/8” & 1-1/4” Guard Pipes 14-1/2" for 1”, 1-1/8” & 1-1/4”forGuard Pipes& 1-1/4” Guard Pipes1”, 1-1/8” & 1-1/4” Guard Pipes 14-1/2" Side Mount Arm 1”, 1-1/8” Ball Mount for 1” & 1-1/8 Guard Pipes #831ST-BALL Side Mount #831ST-100 4-5/8" for 1”, 1-1/8” & 1-1/4” Guard 1”,Pipes 1-1/8” & 1-1/4” Guard Pipes forArm 1” & 1-1/8 Guard #831ST-BALL Clamp-On U-Mount 9.5" for4-5/8" 1”, Pipes 1-1/8” & 1-1/4” Guard Pipes #861-100-125 14-1/2" #861-100 1”, 1-1/8” 1-1/4” Guard #861-100 Pipes #831ST-100 #861-100-125 for 1”, 1-1/8” & 1-1/4” Guard&Pipes #831ST-BALL #861-100-125 #831ST-100

Vertical mount Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

23


31⁄2” (9 cm)

31⁄2” 3 ⁄ ” 6⁄” 1 cm) cm) cm) 3(9 ⁄2” (9 (16.5 (9 cm) 1

2 1

Idea!

2

3⁄” ut Drink Holders are an all-new addition to the versatile line of (9 cm) ers. A convenient and simple to install clamp-on design attaches or 11⁄4” vertical pipe. When mounted on a pedestal guard, the ows the holders to extend forward of the pedestal to be easily rew, or stored near the pedestal for protection and easy access 960-A-1340 Edson’s “Hardware Only” Kits are for the handyman who wishes to design Available in single or double versions. Constructed of white SS Hook 960-A-2174 and build his own cockpit table or accessories based on Edson’s tried and can be mounted either port or starboard by simply removing the SS Hinge Strap true designs. Select the™size table you prefer and match with the hardware 960-A-678 ning upside down. Sized for cans in Koozies or larger cups. shown here. All kits are complete with instructions and stainless hardware. 960-A-2097 SS Wire Clip 960-A-1309LG ink Holder for 1” - 11⁄8” Tubing - Order #820WH-100-1 Hardware KitsOnly” Kits are for the handyman who wishes to design SS Hinge 960-A-1340 SS Hinge Pin ink Holder for 11⁄4 “ Tubing - Order #820WH-125-1 Edson’s “Hardware Edson’s Only” Kits are to enable custom design and build rink Holder for 1” - 11⁄8and ” Tubing -“Hardware Order #822WH-100-2 SS Hook 960-A-2174 build his own cockpit table or accessories based on Edson’s tried and rink Holder for 11⁄4” Tubing -designs. Order #822WH-125-2 cockpit tables or accessories based tried truewith designs. SS Hinge Strap 960-A-1340 true Select the size table youEdson’s prefer and and match the to hardware Edson’s “Hardware Only” Kits are on for the handyman who wishes design 960-A-678 SS Hook Select the sizeown table you and match with thebased hardware shownhardware. here. 960-A-2174 Clip shown here. All kits are prefer complete instructions andon stainless and build his cockpit table orwith accessories Edson’s tried and 960-A-2097 SS Wire 960-A-1309LG SS Hinge Strap All kits are complete with instructions andprefer stainless hardware. SS Hinge 960-A-678 true designs. Select the size table you and match with the hardware 960-A-1340 SS Hinge Pin y” Kits are forshown the here. handyman who wishes to design 960-A-1340 SS Wire Clip All kits are complete with instructions and stainless hardware. 960-A-2097 y” Kits are for the handyman who wishes to design SS Hook 960-A-1309LG 960-A-2174 pit table or accessories based on Edson’s tried and SS SSHinge Hook 960-A-2174 SS860-100 Hinge Pin 960-A-871A pit table or accessories based on Edson’s tried and SS Hinge Strap SS Collar Bracket size table you prefer and match with the hardware 960-A-6781” Table Clip SS Hinge Strap #859-8 1 size table you prefer and match with the hardware for 1” 1 ⁄ 8” Guards 960-A-678 SS Wire Clip960-A-871B complete with instructions and stainless hardware. 960-A-2097 SS 960-A-1259 Wire Clip11⁄8” Table Clip 960-A-1309LG 860-125 complete with instructions and stainless hardware. 960-A-2097 Wire Form SS Hinge SS960-A-1309LG Collar BracketPin Great Gift 10” SS Hinge SS (25.4Hinge cm) for ” GuardsPin 3⁄” 860-100 SS11⁄4Hinge 960-A-871A Idea! (9 cm) 6⁄” (4Bracket req’d) SS Collar 1” Table Clip (16.5 cm) #859-8 for 1”860-100 - 11⁄8” Guards 960-A-871B 960-A-871A 960-A-1259 3⁄” SS Collar Bracket Clip 11⁄8”Table (9Table cm) 860-125 1” Wire Form #859-8 HARDWARE kIT Clip ORDERING GUIDE for - 11⁄8” Bracket Guards SS1”Collar 960-A-871B 960-A-1259 1 Order # Used On Wt lbs (kg) 1 for860-125 1 ⁄4” Guards 1 ⁄8” Table Clip Wire 785-737-95 #737 Drop Leaf TableForm w/ 9.5” Guards (includes Hinges) (4 req’d) SS Collar Bracket 3 (1.4) #785-761 Table Hardware 785-737-125 #737 Drop Leaf Table w/ 12.5” Guards (includes Hinges) for 11⁄4” Guards 3 (1.4) 2 (.9) 785-737-95-125 #737 Drop Leaf Table w/ 9.5” Guards and 1 ⁄ ” dia. (includes Hinges) (4 req’d) 1

BOAT OPERATING EQUIPMENT Hardware Kits for Do-It-Yourselfers

2

YACHT PEDESTAL HARDWARE KIT

Hardware Kits for Do-It-Yourselfers Hardware Kits for Do-It-Yourselfers

for Do-It-Yourselfers Do-It-Yourselfers ss for

1

2

1

1

2

2

1

HARDWARE GUIDE 785-761-95 kIT ORDERING #761 Luncheon Tables w/ 9.5” Guards

4

2 (.9) 860-100 960-A-871A Order # Used On Luncheon Tables w/ 12.5” Guards Wt lbs (kg) 860-100 785-761-125 #761 3 (1.4) 960-A-871A SS Collar Bracket 785-737-95 #737#761 DropLuncheon Leaf Table w/ 9.5” (includes 3 (1.4)2 (.9) HARDWARE kIT ORDERING GUIDE 1”Table Table Clip ⁄ SS ” dia. Collar Bracket 785-761-95-125 Tables w/Guards 9.5” Guards and 1Hinges) Clip for 1”- -111⁄81”⁄8Wt ”Guards Guards #785-761 Table Hardware 1” 785-737-125 #737 Drop Leaf Table w/ 12.5” Guards (includes Hinges) (1.4)2 (.9) Order # Used On lbs3(kg) 785-761-C28 #737 Drop Leaf and #761 Luncheon Tables for Consoles 960-A-871B e Kits for Do-It-Yourselfers for 1” 960-A-871B 960-A-1259 (includes Hinges) 2 (.9) 785-737-95-125 #737All Drop Leaf Tablew/ w/9.5” 9.5”Guards Guards(includes and 1 ⁄ ” dia. 785-737-95 #737 Drop Leaf Table Hinges) 3 (1.4) 1 859-8 Glass Holders .2 (.1) 960-A-1259 ⁄ 8 ” Table Clip 1 1 860-125 2 (.9).17(.3) #785-761 Table Hardware 785-761-95 #761 Luncheon Tables 9.5”Guards Guards(includes 785-737-125 #737 Drop Leaf Table w/w/ 12.5” 1 ⁄ 8” Table Clip ⁄ ” Guards 860-125 3 (1.4) 860-100 Clamp-On Table Mounting Hardware for 1”- 1Hinges) Wire Form 960-A-1340 #860-100 are Only” Kits are for the handyman who wishes to design #860-125 Wire Form SSHinges) CollarBracket Bracket 785-761-125 #761Clamp-On Luncheon Tables w/ 12.5” Guards 32 (1.4) ⁄ ” dia. (.9).17(.3) 785-737-95-125 #737 Drop Leaf Table w/ 9.5” Guards and 1 for Guards 860-125 Mounting Hardware 1 ⁄ ”(includes SS Hook 960-A-2174 n cockpit table or accessories based on Edson’s tried and SS Collar (.9) 785-761-95-125 #761Luncheon Luncheon Tables w/9.5” 9.5”Guards Guards and 1 ⁄ ” dia. for 111⁄4” Guards 785-761-95 #761 Tables w/ 22(.9) SS Hinge Strap ect the size table you prefer and match with the hardware 960-A-678 #860-125 for 1 ⁄4” Guards 785-761-C28 #737Luncheon Drop LeafTables and #761 Tables for Consoles 2 (.9) 785-761-125 #761 w/ Luncheon 12.5” Guards 3 (1.4) (4 req’d) kits are complete with instructions and stainless hardware. 960-A-2097 SS Wire Clip 960-A-1309LG (4 req’d) 2.2(.9)(.1) 859-8 All Glass Holders 785-761-95-125 #761 Luncheon Tables w/ 9.5” Guards and 1 ⁄ ” dia. SS Hinge

#860-125

1

1

4

1

1

1

4

1

1.508.995.9711 860-100 785-761-C28

#860-100

860-125 859-8 860-100 860-125

4

1

8

4

4

4

SS Hinge Pin Guards Clamp-On Table Mounting HardwareTables for 1”-for 11⁄8”Consoles #737 Drop Leaf and #761 Luncheon Clamp-On Table Mounting Hardware for 11⁄4” Guards All Glass Holders Clamp-On Table Mounting Hardware for 1”- 11⁄8” Guards Clamp-On Table Mounting Hardware for 11⁄4” Guards

HARDWARE kIT ORDERING GUIDE #860-100 HARDWARE kIT ORDERING GUIDE

Order # Used On Order # Used On 1.508.995.9711 785-737-95 #737 DropLeaf LeafTable Tablew/ w/9.5” 9.5”Guards Guards(includes (includesHinges) Hinges) 785-737-95 #737 Drop #785-761 Table Hardware 785-737-125 #737 Drop Leaf Table w/ 12.5” Guards (includes Hinges) 860-100 #785-761 Table Hardware 960-A-871A1.508.995.9711 785-737-125 #737 Drop Leaf Table w/ 12.5” Guards (includes Hinges) SS Collar Bracket and 11⁄4” dia. (includes Hinges) 1” Table Clip 785-737-95-125 #737 Drop Leaf Table w/ 9.5” Guards 1 785-737-95-125 #737 Drop Leaf Table w/ and 11⁄4” dia. (includes Hinges) for9.5” 1” - 1Guards ⁄8” Guards 960-A-871B 960-A-1259 1 #761Luncheon LuncheonTables Tablesw/ w/9.5” 9.5”Guards Guards 1785-761-95 ⁄8” Table Clip 860-125 785-761-95 #761 Wire Form Collar Bracket 785-761-125 #761Luncheon LuncheonTables TablesSS w/ 12.5” Guards 785-761-125 #761 w/ Guards for12.5” 11⁄4” Guards dia. 785-761-95-125 #761 Luncheon Tables w/ 9.5” Guards and111⁄41”⁄4”dia. (4 req’d) 785-761-95-125 #761 Luncheon Tables w/ 9.5” Guards and 785-761-C28 #737 Drop Leaf and #761 Luncheon Tables for Consoles 785-761-C28 #737 Drop Leaf and #761 Luncheon Tables for Consoles 859-8 AllGlass GlassHolders Holders HARDWARE859-8 kIT ORDERING GUIDE All Order # Used On Wt lbs (kg) Guards 860-100 Clamp-On TableMounting MountingHardware Hardware for1”1”-111⁄8”1⁄8”Guards 860-100 Clamp-On Table for #860-100 #860-100 785-737-95 #737 Drop Leaf Table w/ 9.5” Guards (includes Hinges) 3 (1.4) 1 860-125 Clamp-On Table Mounting Hardware for 11 ⁄4” Guards #785-761 Table Hardware Mounting Hardware for 1 ⁄4” Guards 785-737-125 860-125 #737 Drop Leaf Table w/Clamp-On 12.5” Guards Table (includes Hinges) 3 (1.4)

0-125

#737 Drop Leaf Table w/ 9.5” Guards and 11⁄4” dia. (includes Hinges) #761 Luncheon Tables w/ 9.5” Guards #761 Luncheon Tables w/ 12.5” Guards #761 Luncheon Tables w/ 9.5” Guards and 11⁄4” dia. #737 Drop Leaf and #761 Luncheon Tables for Consoles All Glass Holders Clamp-On Table Mounting Hardware for 1”- 11⁄8” Guards Clamp-On Table Mounting Hardware for 11⁄4” Guards

785-737-95-125 785-761-95 785-761-125 785-761-95-125 785-761-C28 859-8 860-100 860-125

.17(.3) 2 (.9) .17(.3) .2 (.1) .17(.3) .17(.3)

Wt lbs (kg) Wt lbs (kg) 21 (1.4) 3 3(1.4) (1.4) 21 3 3(1.4) 2 (.9) 2 (.9) 2 (.9) 2 (.9) (1.4) 3 3(1.4) 2 (.9) 2 (.9) 2 (.9) 2 (.9) .2 (.1) .2 (.1) .17(.3) .17(.3) .17(.3) .17(.3)

2 (.9) 2 (.9) 3 (1.4) 2 (.9) 2 (.9) .2 (.1) .17(.3) .17(.3)

MORE INFO / CATALOGUES

1.508.995.9711 1.508.995.9711 #860-100

21

21 21

Steering systems So-Pac Marine in conjunction with Edson offer full engineering and design services. We are happy to be involved in the early stages of your boat’s design and can provide you with the best system to meet your needs. 21 Please contact So-Pac 1.508.995.9711 Marine’s steering specialists and Carbon, Racing and Custom Wheels

Edson components, accessories and more... Edson’s range is extensive, only a summary is presented in this catalogue; Edson’s catalogues carry their full range. For more information on Edson products, contact So-Pac Marine on (09) 448 5900 or info@sopac.co.nz.

Pro-Series™ Carbon Fiber Wheel • Ultra-light weight - under 10 pounds! • Available from 36” (900mm) to 60” (1525mm) • Large Diameter 1-5/8” wheel rim. • Virtually no flywheel effect. • High Gloss Clear Coat Carbon Fibre Finish • Ergonomic Forked Tri-Spoke Design • Monocoque Construction for Strength

Distinctive YA C H T W H E E L S

Ordering Information 35” Pro-Series Carbon Fibre Wheel - Order #659-0900-35 40” Pro-Series Carbon Fibre Wheel - Order #659-1000-40 44” Pro-Series Carbon Fibre Wheel - Order #659-1100-44 48” Pro-Series Carbon Fibre Wheel - Order #659-1200-48 52” Pro-Series Carbon Fibre Wheel - Order #659-1300-52 55” Pro-Series Carbon Fibre Wheel - Order #659-1400-55 59” Pro-Series Carbon Fibre Wheel - Order #659-1500-59

W-1

(6.74lbs / 3.06kg) (7.36lbs / 3.34kg) (7.66lbs / 3.47kg) (7.95lbs / 3.61kg) (8.25lbs / 3.74kg) (8.85lbs / 4.02kg) (9.21lbs / 4.18kg)

Tri-Spoke Carbon Fiber Wheel

Since 1859

• Reach-Through Design • Leather Covered Aluminum or Teak and Holly Rims. • Extremely lightweight • Virtually no flywheel effect. • Available from 32”(813mm) to 48” (1219mm) diameter • Ultra-Modern 3 spoke design. • Supplied with clear, white or black finish. • Fits standard Edson 1” tapered wheel shaft. 32” Tri-Spoke Carbon Fiber Wheel - Order #637-32 36” Tri-Spoke Carbon Fiber Wheel - Order #637-36 40” Tri-Spoke Carbon Fiber Wheel - Order #637-40 44” Tri-Spoke Carbon Fiber Wheel - Order #637-44 48” Tri-Spoke Carbon Fiber Wheel - Order #637-48 Specify LE or CG for Leather or Comfort Grip Rim Cover (Specify Buck Tan or Dove Gray)

TP-52 Orlanda

Teak & Holly Rim Available!

Wheel Flange Adapter Wheel Flange Adapter #698FL-B-929

MegaYachts & Tenders

Power & Sail

Center Consoles & Sportfish

Cruisers & Racers1

Yacht (Power and Sail) Wheels Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

8

Edson’s Wheel Flange Adapter allows Edson’s lightweight Diamond Series and Carbon Fiber flanged mount steering wheels to mount directly onto Edson’s tapered Wheel Shafts. It is recessed to allow room for tightening the wheel nut and can be used with Edson’s convenient Thru-Shaft Wheel Brakes. Investment cast and polished 316 Stainless. Wt. 2 lb (.9 kg). Wheel Flange Adapter - Order #698FL (See price page for sizes).

www.edsonmarine.com

Sailboat Products 2008

Powerboat Products 2008

89


BOAT OPERATING EQUIPMENT

STABILISERS ROLL FIN STABILISERS WESMAR’s electronic system cycles at 1000 times per second delivering lighting speed reaction for exceptional performance. The electronic gyro sensor sends information about roll velocity and acceleration directly to WESMAR’s proportional valves, which react instantaneously to rotate the fins. When a desired lift is achieved to counteract the rolling force of a wave, WESMAR’s closed proportional hydraulic system instantly interacts with the electronic gyro to correct the rolling. This coordinated response stabilizes the vessel immediately. The WESMAR Advantage • No hydraulic hose to the gyro compared to as many as 6 additional hose on competitive hydraulic gyros. • Fins can be electronically/hydraulically centred to least resistance for true null position, required on haul out. • No moving parts in electronic including the gyro. • No gyro adjustments • No electronic maintenance • No horizon adjustment • Easy to install • Plug and play proportional driver card- proportional driver card pre-wired harness. WESMAR’S Roll Fin Stabilizer – 2.5 to 22 sq. Ft. fins • Optional heel control on command. • Console sensitivity adjustment for fin reaction time. • LED dimmer control switch. • Waterproof switch and LEDs. • Optional remote switch. • Unique electronic gyro. • Electronically adjusts for 90% of the rolls. • Rugged, triple layer fin construction. • Pleasure boat applications. • Commercial applications. • Electronic upgrade packages. • 12 or 24 VDC system available.

Advanced Technology Design • Lightning speed reaction time. Superior performance. Exceptional comfort. • WESMAR stabilizers add comfort and control to your cruising. • Over 35 years of marine manufacturing experience. Comfort At Your Fingertips With the WESMAR stabilizer system, the captain has heel/trim* control at all times along with full control of the fin’s reaction time with the sensitivity control. WESMAR has conveniently positioned them on the main console. This allows for immediate control over a wide variety of constantly changing sea conditions and ensures quick and accurate corrections. The optional adjustable heel control feature allows trimming of the vessel on demand.

Electric Gyro Console Remote Station More information about Wesmar products is available on request. email info@sopac.co.nz

More information about Wesmar products is available on request. email info@sopac.co.nz

90

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT OPERATING EQUIPMENT

TRIM TABS

MADE IN THE USA

Instatrim, the original hydraulic boat leveller, provides a better ride every time you leave the dock. A simple rocker type control permits you to correct a bow high or list condition on any shaped hull, from 5 to 20 metres. Easy to install Instatrim boat levellers are strong and durable, and come in lengths to fit most boats. Custom sizes are also available. Instatrim’s 40 years commitment to the boating industry assures you of a quality product that performs excellently.

Bow high or listing TABS OFF

Corrected bow and list TABS ON

INSTATRIM TRIM TAB KITS • Single Cylinder Kits with tab sizes from 300 x 200 up to 1000 x 200mm. • Dual Cylinder Kits with tab sizes from 300 x 280 up to 1500 • Hydraulic Cylinders: Impact resistant, fibreglass reinforced x 250mm. nylon cylinders eliminate expansion and resist ultra-violet rays. 2 expanding type seals, plus O-ring, eliminate high Kits comprise: and low pressure leaks. A stainless steel spring retracts the • Motor & Pump Cover: 4 1/2” D x 6” W x 11”H, high impact cylinder when the boat is not in motion ABS plastic cover with a built-in oil reservoir mounts • Cylinder Brackets: Swivel type brackets enable cylinders to easily with two screws. The filler is located in front. Cover be mounted and adjusted to any angle. Knockout pins act as protects the motor from occasional wash down shear pins if tab strikes an object. • Motor: A powerhouse with coated wiring and a thermal • Trim Tabs: 12 gauge 304 stainless steel trim tabs are available overload that resists temperature and amperage build-up. in standard and custom lengths. They are guaranteed against Stack windings and top mounting eliminates oil leakage. electrolysis, remaining strong and secure. Insta-Trim’s hinges • Pump: Designed and engineered exclusively by Insta-Trim. prevent most spray and can be transom or bottom mounted. The built-in bypass is factory set at 400 P.S.I. Current at 12 • Hose: Designed and manufactured exclusively for Insta-Trim volts doesn’t exceed 16 amps because the unit circulates with nylon-reinforced webbing and protective PVC coating. oil, rather than stalling out or trying to pump additional Rated at 2000 lb. burst pressure, 5.0 meters of hose is pressure. supplied for your system. Entering the transom 150 mm • Solenoids: Custom designed for Insta-Trim, epoxy sealed above the water line, the hoses are held securely with hose and humidity resistant, to preventing shorting out. trim and stainless steel clamps. The solenoids lock the tabs in any position, eliminating • Oil: One pint of Insta-Trim biodegradable transmission oil, driftback. funnel and mounting hardware is supplied. • Wiring: Colour-coded wiring in 8 to 12 metre lengths with • Installation: Installation of Insta-Trim trim tabs is quick and quick , pre-terminated connectors. easy. What little hardware that is needed is supplied and the • Dashboard Waterproof Rocker Switches: Mounted on the components of the system arrive pre assembled. The system dash they are easy to operate. 2TP Micro switch with silver can be installed on fibreglass, aluminium, steel or wood hulls contact points adjust the tabs for maximum control and in any design, flat, round or deep-V. Colour-coded wiring performance. makes the electronic installation simple. Tabs can be painted to prevent growth.

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

91


BOAT OPERATING EQUIPMENT

INSTA-TRIM TAB SETS Code

Approx. boat length

Cylinders per tab

Tab Size (mm)

N248000

7 to 8.5 M

Single

500 x 200

N301000DC

8.5 to 10 M

Dual

750 x 250

N308000

8.5 to 9.7 M

Single

750 x 200

N368000 N368000DC

10 to 12 M 10 to 12 M

Single Dual

900 x 200

N408000

12 to 13.7 M

Single

1000 x 200

N408000DC

12 to 13.7 M

Dual

1000 x 200

900 x 200

N468000DC

13.7 to 16.7 M

Dual

1150 x 200

N50100DC

16.7 to 18.7 M

Dual

1250 x 250

N508000DC

16.7 to 18.3 M

Dual

1250 x 200

N558000DC

18.3 to 21 M

Dual

1400 x 200

N601000DC

20 M and longer

Dual

1500 x 250

N608000DC

20 M and longer

Dual

1500 x 200

Kits include everything you need for installation (except basic tools) Swivel type brackets allow InstaTrim boat levelers installed at any angle, even under platforms and transoms which are slanted aft.

UNIVERSAL MOTOR PUMP Insta-Trim have released a new universal motor pump that fits all brands of hydraulic trim tab motor pumps. • Pump has adjustable pressure relief valve set at 400psi • Built in Bypass so fluid circulates to prevent the pump from stalling • Motor has thermal overload protection • Includes all necessary fittings for a 12V single cylinder system • Kit contains biodegradable oil and funnel • Heavy duty solenoid valves to lock cylinders in place • 18” wire harness with colour coding instructions for other brands Code N12700UNV

Description Universal Motor pump

WATER PROOF SWITCHES • • • • •

Easily installed with a 38 mm hole saw Adapt easily to other brands of trim tabs Sealed between the switch and the dashboard No interrupter relays needed Drop in replacement for all factory Insta-Trim switches Code

Description

N2002TTCBFFB

Waterproof trim tab switch w/flywire - black face

N2002TTCBFGB

Waterproof trim tab switch - black face

ELECTRONIC TAB LOCATOR KITS • • • •

Clearly shows the position of your trim tabs Instrument designed to match your rocker type controls and its smart display adjusts brightness to sunlight Simple Installation with no moving parts The hard wearing detectors mount easily on each hydraulic cylinder Code

Colour

Harness Length

N29000BWL

Black

7.6 m

N29000WBL

White

7.6 m

N29002BWL

Black

15.2 m

N29002WBL

White

15.2 m

White with chrome bezel

15.2 m

N29002WBL C

92

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


BOAT OPERATING EQUIPMENT MADE IN THE USA

SPARE PARTS BREAKDOWN

N2002TTCBFFB N2002TTCBFGB

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

93


BOAT OPERATING EQUIPMENT

Tab Locator Parts

MADE IN THE USA

94

PART #

TAB LOCATOR PARTS

PART #

TAB LOCATOR PARTS

N29010BWL

ROUND BLACK INDICATOR PANEL

N12635

OIL SUMP TUBE

N29010WBL

ROUND WHITE INDICATOR PANEL

N12609

OIL RESERVOIR PLUG

N29028

Y-CONNECTOR, BLACK JUNCTION BOX

N12610

INSTA-TRIM BIODEGRADABLE OIL

N29030

OUTSIDE SENSOR AND 6’ CABLE

N12611

FUNNEL FOR BIODEGRADABLE OIL

N29024-25

WIRE HARNESS, 25’ WITH PLUG. FITS Y-CONNECTOR TO PANEL

N12612

INSTA-TRIM BIODEGRADABLE OIL & FUNNEL KIT

N29024-50

WIRE HARNESS, 50’ WITH PLUG. FITS Y-CONNECTOR TO PANEL

N12709

STAINLESS STEEL SOLENOID HOSE FITTING CLAMP

N29040

INSIDE SENSOR FOR PISTON CAP

N12728

HYDRAULIC HOSE 2,000 POUNDS BURST PRESSURE, PER FOOT

N29040-A

BRASS SCREW FOR INSIDE SENSOR

N12729

HOSE TRIM WITH SCREWS PER EACH

N29202

BRACKET FOR LIGHT PANEL

N12729-S

SHORT HOSE TRIM WITH SCREWS PER EACH

N29203

NUT FOR LIGHT PANEL

N12727-A N12727ATBL204

HYDRAULIC CYLINDER W/HOSE PER EACH HYDRAULIC CYLINDER W/ HOSE W/SENSOR FOR SYSTEMS WITH TAB LOCATORS

N12700UNIV

UNIVERSAL MOTOR PUMP CONVERTS TO FIT OTHER BRANDS

N12730

CYLINDER PINS

N12700-12

COMPLETE MOTOR PUMP UNIT 12 VOLT

N12731

HOSE COLLARS

N12700-A-12

12 VOLT WITH TEES FOR 4 CYLINDERS & HOSES

N2002TTCBFGB

WATERPROOF SWITCHES BLACK FACE GRAY BUTTONS

N12700-24

COMPLETE MOTOR PUMP UNIT 24 VOLT

N2002TTCBFFB

WATERPROOF SWITCHES BLACK FACE WITH WIRE FOR FLYBRIDGE

N12700-A-24

24 VOLT WITH TEES FOR 4 CYLINDERS & HOSES

N2002TTCBFGB-G

WATERPROOF SWITCHES BLACK FACE GRAY BUTTONS NO LOGO

N12700-32

COMPLETE MOTOR PUMP UNIT 32 VOLT

N12725

ONE COMPLETE SET OF SWITCHES (BLACK PLATE)

N12700-A-32

32 VOLT WITH TEES FOR 4 CYLINDERS & HOSES

N12725-A

ONE SWITCH ONLY

N12662-12

12 VOLT MOTOR ONLY

N12725-B

ONE SET SWITCHES WITH WIRE FOR FLY BRIDGE

N12662-24

24 VOLT MOTOR ONLY

N12725-C

WATER RESISTANT COVER FOR SWITCH ASSEMBLY

N12662-32

32 VOLT MOTOR ONLY

N12726

20 AMP FUSE WITH WIRE

N12702

HYDRAULIC PUMP WITH PRESSURE RELIEF VALVE

N13001

ONE SWITCH PLATE WITH SCREWS (BLACK)

N12657

OUTSIDE HOUSING & RESERVOIR WITHOUT FEMALE WIRE RECEPTACLE

N13001-A

ONE SWITCH PLATE FOR WATER RESISTANT COVER W/SCREWS (BLACK)

N12657-A

WHITE RESERVOIR

N12735

25' WIRE HARNESS

N12657-B

OUTSIDE HOUSING ONLY WITHOUT FEMALE WIRE RECEPTACLE

N12737

40' WIRE HARNESS

N12641-12

SOLENOID VALVE WITH WHITE WIRE, 12 VOLT

N13000

14' WIRE HARNESS FOR FLY BRIDGE CONTROLS

N12641-24

SOLENOID VALVE WITH WHITE WIRE, 24 VOLT

N12688

FEMALE WIRE RECEPTACLE

N12641-32

SOLENOID VALVE WITH WHITE WIRE, 32 VOLT

N13302

18" WIRE HARNESS FOR CONVERTING OLD STYLE MOTOR PUMP TO NEW STYLE

N12701-12

SOLENOID VALVE WITH GREEN WIRE, 12 VOLT

N12732

NYLON CYLINDER BRACKETS (4 PIECESCOMPLETE SET)

N12701-24

SOLENOID VALVE WITH GREEN WIRE, 24 VOLT

N12732-A

NYLON CYLINDER BRACKET (1 PIECE)

N12701-32

SOLENOID VALVE WITH GREEN WIRE, 32 VOLT

N12738 12738-A

STAINLESS STEEL TABS WITH HINGE, PER SQUARE INCH H.D. 1/4 INCH STAINLESS STEEL PLATE RAVEN GLOSS BLACK, PER SQUARE INCH

N12715

SOLENOID HOSE FITTING BARB TYPE

N12739

STAINLESS STEEL TAPPING SCREW 10 X 1

N12668

BRASS NIPPLE FROM PUMP TO SOLENOID

N12740

STAINLESS STEEL 1/4 X 5/8 BOLT

N12743

BRASS T CONNECTION SET FOR DUAL CYLINDER APPLICATION

N12741

STAINLESS STEEL LOCKWASHER FOR 5/8 BOLT

N12634

MOTOR TO SHAFT COUPLING

N12742

STAINLESS STEEL 1 /4 X 20 HEX NUT

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


STEERING WHEELS

EDSON PRO-SERIES POWER WHEELS

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

95


component designed to give the wheel spokes rigidity and master craftsmen and shaped for the perfect fit in your hand This wheel will be t thing Composite Hybrid Wheel - Teak the or first Teak & visito Holl

ster craftsmen and shaped for the perfect fit in your hand.

mposite Hybrid Wheel - Teak or Teak & Holly Rim

STEERING WHEELS

hru-Shaft Brake Optional • Thru-Shaft Brake Optional eak & Holly Rim Classic Teak Ya • Teak & Holly Rim 0” (762mm) to 52” (1320mm) diameter • Solid Teak Cons • 30” (762mm) to 52” (1320mm) diameter lear coat Awl-Grip®, black or white finish • 26” (660mm) to • Clear coat Awl-Grip®, blackheorCarbon/Wood white finish em #637TK In 1859 Jacob Edson Inlayhe Wheel Carbon/W is an e his started exquisite a wheel features histhat exquisite teakthey andwheel holly wood features laminates, andtogether hollytoday, wood withlaminates, areasyears of beautifully together of beautifully tradition are proud toteak continue 149 later.with It isareas a tradition based on the • Bronze or Chrom wheel to date. These wheels wheelwere to date. orig clear-coated carbon-weave laminate. carbon-weave The spokes are laminate. carefully The sculpted spokes into are the carefully teak sculpted into the they teak and • Item #637TK timeless values of innovation, integrity,clear-coated quality and value. Edson Quality can be seen inand every product manufacture, * 1” Straight bore 48”(1220mm) custom molded 48”(1220mm) carbon fib cu holly rim for a very comfortable holly rimgrip for afor very the comfortable helmsman, as grip well forasthe a robust helmsman, connection as wellof asthe a robust connection of the products that willspokes unquestionably stand up to the unforgiving marine environment. Edson Value relates to the price you pay for exquisite lamination of teak exquisite with alaminati highlig to the wheel rim.spokes The wheel to therim wheel is constructed rim. The wheel of alternating rim is constructed layers of teak of alternating and holly layers of teak and holly • Item #603 rim with an artistic visualrim segue withof ancarbon artistic a product, its hub features, benefits, and most important —Rim its life expectancy. creating a beautiful contrast creating of two aas beautiful classic maritime contrast woods. of two classic The level maritime of woods. The level of his wheel features the same and its spoke costruction the Teak version shown above, of teak and holly with a touch of teakofand exposed holly construction and finish inconstruction these wheels and is unmatched, finish in these and wheels as a result, is unmatched, they and as a result, they his wheel features the same hub and spoke costruction a but has a wheel rim constructedquickly of a lightweight alloy material and is attached to the spokes Edson wheel clutch optional set into Edson a car w become the focalquickly point on become the finest the vessels. focal point on the wheels finestare vessels. coated These wheels areand coated hisThese exquisite wheel features teak holly wood laminates, together with areas ofoptional beautifully layers ofof clear Awl-Grip® layers for aalloy ofmirror clearma fini Aw withas multiple of clear withAwl-Grip® multiple layers for mirror clear finish. Awl-Grip® They for are a available mirror finish. They are available but has a wheel rim constructed a lightweight h a high tech material that serves bothlayers the structural joint, asaofwell as an isolator, to properly he Edson Clutch clear-coated carbon-weave laminate. The spokes are carefully sculpted into the teak and with or without Edson’s wheel with orclutch. without Custom Edson’s faceplate wheel clutch. engraving Custom available. faceplate engraving available. a high material that serves theCarbon/Wood structural jo arate the carbon and alloy materials. The rim comes with a standard gray Carbon/Wood Wheelshaft holly rim for orthopedic a very comfortable grip for the helmsman,with as well as atech robust connection of the as bothInlay the wheel Carbon/Wood Laminate Carbon/Wood Wheel Laminate Wheel separate the carbon materials. Theoptional rim comes Integral hub clutch • Integral hubwi clu whide cover for the ultimate tactile grip. spokes to the wheel rim. The wheel rim is constructed of alternating layers ofand teakalloy and•holly “Flywheel Effect,” 48” (1220mm) diameter • 48” (1220mm) • Integral Hub Clutch optional • Integral Hub Clutchcreating optional a beautiful contrast of two classic maritime woods. cowhide for the ultimate•tactile grip. Thecover level of twin, tapered spok • Clear coat Awl-Grip®•for Clear a mirror coat Awl fini • 48” (1220mm) diameter • 48” standard, (1220mm) other diameter sizes tostandard, suit other sizes to suit and finish in these wheels is unmatched, and as a result, they • Item #654 adds a • tremendou Item #654 • Clear coat Awl-Grip®•for Clear a mirror coat Awl-Grip® finish construction for a mirror finish mposite Hybrid Wheels -• Leather Alloy Rim Item #652 Covered • Item #652 quickly become the focal point on the finest vessels. These wheels are coated excellent choice foin dson’s Teak Rim Destroyer Wheels are warm to the touch, elegantAl Composite Hybrid Wheels - Leather Covered with multiple layers of clear Awl-Grip® for a mirror finish. They are available hru-Shaft Brake Optional add a personalize dson’s Molded Carbon Fibre dson’sWheels Moldedare Carbon as elegant Fibreas Wheels they are arelightweight. as elegant as They theyare are lightweight. They arelight. They feature hollow, tapered stainless spokes and a highly po with or without Edson’s wheelyacht. clutch. Custom faceplate engraving Thru-Shaftavailable. Brake Optional ove Gray or Buck Tan Leather Rim Cover on the race as comfortable as comfortable course as they onare the in race thecourse cockpitasofthey the well-appointed are in the cockpit of the well-appointedstainless yacht. • cousins, but with a ergonomically shaped solid laminated 1-1 in carbon, the Constructed material isinhand carbon, laidthe intomaterial the mold is to hand enhance laid into thethe look mold of the to woven enhance the look of the woven dson’s Carbon / Wood dson’s Laminated Carbon Wh Clutched Bi-Spo • Dove Gray or Buck Rim Cover 0” (762mm) to 52” (1320mm)Constructed diameter teak rim, sanded smooth, readyTan for Leather the finish of your choice.Carbon These whe Laminate Wheel carbon fabric. Great care carbon in thefabric. designGreat stageCarbon/Wood care was in taken the design to ensure stage excellent was taken ergonomics to ensure forexcellent ergonomics for Carbon Fibre to form a unique blend Fibreot • 30” topower 52” (1320mm) diameter lear coat Awl-Grip®, black orthewhite • Integral hub clut to upgrade the(762mm) look of any boatbuilt helm or sailboat cockpit . They comfortfinish of the helmsman. the comfort The rim of isthe just helmsman. the right shape The rim and is diameter, just the right and shape the angle and diameter, of the and the angle of the by master craftsmen, built each by wheel masteriscra cu • Integral Hub Clutch optional • Clear coatyacht. Awl-Grip®, black orto white spokes where they join the spokes rim are where at athey comfortable join the rim 45°are angle at aso comfortable your wrist is 45° in a angle comfortable so your wrist is in a comfortable em #637LE or #637CG wood match your boat’s wood brightwork, to match yo de •finish 48” (1220mm), centerpiece to your •from 48”the(1220mm) diameter standard, other sizes to suit position when steering from position the rail. whenAllsteering molded carbon rail. wheels All come molded standard carbonwith wheels a clear come standard with a clear available. available. • Item #637LE or #637CG • Buck Tan or Dov Awl-Grip® finish, custom Awl-Grip® Awl-Grip® finish, colors custom are Awl-Grip® These colors wheels are available. can also wheels with finish can also be fitted with • available. Clear coat Awl-Grip® forbeThese afitted mirror Teak Rim Destroyer Wheel Carbon / Wood Laminated Carbon /Whee Woo • Teak & Holly Rim Edson wheel clutches. Custom Edson wheel faceplate clutches. engraving Custom available. faceplate engraving available. • Item #652 • Integral Hub Clutch optional • #650 Integral Hub Cl • Straight or Tapered hub • Item Molded Carbon Fibre Molded WheelCarbon Fibre Wheel

CUSTOM CUSTOM YACHT YACHT WHEELS WHEELS FOR POWER FOR POWER AND SAIL AND SAIL T

T

T

T

CUSTOM YACHT WHEELS FOR POWER AND SA T

T

T

CUSTOM YACHT WHEELS FOR POW

E

els.com • Integral Hub Clutch optional

E

E

• 40” - 80” (1220mm) •diameter 40” - 80” (122 Clutched Bi-Spoke Wheel Composite Hybrid Wheels • 16”(406mm) - 48” (1210mm) diameters. • Integral Hub Clutch optional • Integral Hub Clutch optional • are Custom inlay designs •available Custom inlay de dson’s MoldedAlloy Carbon Fibre Wheels are as•elegant as they are lightweight. They • Integral hub clutch Leather Covered Rim Solid Teak Rim • 40” - 80” (1220mm) •diameter 40” - 80” (1220mm) diameter • Item #653 • Item #653 as comfortable on the race course as they are in the cockpit of the well-appointed yacht. 48″ (1220mm) •diameter standard, sizes • colors Thru-Shaft Optional • 48″ (1220mm), 54″ for (1372mm) Available in custom colors •other Available or clear incoat custom Awl-Grip® or clear Brake coat Awl-Grip® • Item #645TK/647TK Sail • and Item #1750TK for Power in Buck carbon, material hand laid into the to enhance the look of the woven • Item #639 • Item #639 14 to suit • Constructed Dove Gray or Tanthe Leather Rim isCover 60″ mold (1525mm) diameters

Carbon/Wood Laminate Wheel •

E

E

E www.edsonwheels.com

CUSTOM POWER AND SS CUSTOM YACHT YACHT WHEELS WHEELS FOR FORCUSTOM POWERYACHT ANDW

fabric.toGreat care in the design stage was• taken ensure excellent ergonomics for • Clear coat Awl-Grip® for a mirror finish • carbon 30″ (762mm) 52″ (1320mm) diameter BucktoTan or Dove Gray Leather available www.edsonwheels.com www.edsonwheels.com comfort of the helmsman. rimfinish is just the right and the angle of the • the Clear coat Awl-Grip®, black orThe white • shape Teak &and Hollydiameter, Rim available on special order 12

T

spokes where they join the rim are at a comfortable angle so your wrist is inWheel a comfortable he45° classic Edson Destroyer® will add distinction and value to dson’s Teak Rim Destroyer are warm to thewheels touch,come elegant in appearance and feather position when steering from the Wheels rail. All molded carbon standard withtoa60” clear sizes ranging from 18” (457mm) (1520mm), they feature an dson’s Classic dson’s Classic Teak Yacht Wheel isstainless theare Original. Inand production for over 125 years, thisthese light. They feature hollow, tapered spokes a highly polished hub, just like their wheels Awl-Grip® finish, custom Awl-Grip® colors available. These wheels can also beyet fitted with and tapered hollow spokes. Elegant strong, havethat a ti is a wheel is a wheel that belongs on any classic yacht or stately passagemaker. Created by thirdstainless cousins, but with a ergonomically shaped solid laminated 1-1/4” (32mm) natural Edson wheel clutches. Custom faceplate engraving available. will look great on any style of sailboat. The “D” shaped rim is comforta generation master generation master craftsmen, theforskills go inWheel to making these wheels have been teak rim, sanded smooth, ready the and finishartistry of yourthat choice. These wheels arewill themake perfect way optional Leather Rim Cover those long hours at the he passed down from Molded Carbon Fibre Wheel passed down to generation, acockpit consistency and thatacan onlyattained behub or to upgrade thefrom look generation of any power boat helm Destroyer orensuring sailboat . They will quality add beautiful Wheels are available with aeither 1” straight taper byathe ha • Integral by Hub optional talents of their builders. attained theClutch hand-crafted centerpiece to your yacht. machined to ensure an exact fit to your steering shaft.Although extremel •Although 40” - 80”extremely (1220mm) diameter elegant, the Classic Teak Yacht Wheel is not just a showpiece for a wall. Itis handcrafted to th Stainless Wheels RiminDestroyer Wheel •Teak custom oroffshore-quality clear coat Awl-Grip® classic yacht. It fea isAvailable handcrafted to the colors highest standards,Destroyer and will provide years of service for the holly bungs. Deliv ••classic Item #639 • Ideal Delivery Wheel. yacht. It features solid teak spokes and felloes rigidly secured with stainless fasteners and Straight or Tapered hub bungs. Delivered fully varnished. •holly 16”(406mm) - 48” (1210mm) diameters.• Marine Grade Stainless Classic Teak Ya • Tapered, Hollow spokes for light weight • Solid Teak Rim • Available from 18” (457mm) to 60” (1520mm) • Solid Teak Cons Teak Yacht for Wheel •Classic Item #645TK/647TK Sail • Item #1750TK for Power • 24” (610mm) to • Leather or Comfort Grip rim covers available • Solid Teak Construction • Bronze or Chrom • Buck Tan or Dove Gray Leather available * 1” straight bore • 24” (610mm) to 36” (915mm) diameters • Item #645/647 for Sail • Item #1750 for Power • Item #601

EE

12

E

www.edsonwheels.com

• Bronze or Chrome Hub available

Teak Rim Destroyer Wheel • Straight or Tapered hub • 16″(406mm) - 48″ (1210mm) diameters. • Solid Teak Rim

T

Stainless Destroyer Teakand Yacht Wheel * 1” boreWheels he straight classic Edson Destroyer® Wheel will addClassic distinction value to any boat. Available in • •Ideal Delivery Wheel. • Solid Teak Construction Item #601 sizes ranging from 18” (457mm) to 60” (1520mm), they feature an attractive dished shape dson’s Polished • Marine Grade Stainless • 24″ (610mm) to 36″ (915mm) diameters 16 and tapered hollow spokes. Elegant yet strong, these wheels have a timeless appearance that The bronze wh • Tapered, Hollow spokes for light weight • Bronze or Chrome Hub available its attractive gleam will look great on anyBronze style to ofWheel sailboat. “D” shaped rim distinction isbore comfortable in your handsboat. and the dson’s Polished withThe Teak Handles add to any traditional • Available from 18″ (457mm) 60″ (1520mm) • * 1″ straight Available in sizes Leather Wheel Rim Cover will make those long hours at the helm maintenance less tiresome.will Edson The bronze wheel is delivered highly polished and with regular retain • optional Leather or Comfort Gripbody rim covers available varnished teak han Wheels are withtoeither a 1” straight oron a tapered both precision with stainless carri • Destroyer Buck Tan or Dove Gray Leather available its attractive gleam, oravailable it can be left age gracefully andhub take a classichub, patina appearance.

www.edsonwheels.com

E

E

machined an exact fit to yourtosteering shaft. in diameter, the Bronze Wheel features Available to in ensure sizes from 20” (508mm) 30” (762mm) Polished Bronz varnished teak handles and a 1” straight shaft bore. The solid teak handles are held securely • Cast in Edson’s Stainless Destroyer Wheels with stainless carriage bolts, which can be easily replaced if needed. • Made of solid b • Ideal Delivery Wheel. • Hand polished t •Polished Marine Grade Stainless Bronze Wheel • Varnished Teak •• Tapered, Hollowown spokes for light weight * 1” straight bore Cast in Edson’s foundry •• Available from bronze 18” (457mm) to 60” (1520mm) • Item #602BR Made of solid •• Leather or Comfort rimfinish covers available Hand polished to aGrip mirror •• Buck Tan orTeak DoveHandles Gray Leather available Varnished 18 •* Item #645/647 1” straight bore for Sail • Item #1750 for Power

www.edsonwheels.co

• Item #602BR

www.edsonwheels.com www.edsonwheels.com

Polished Bronze Wheel 16• Cast in Edson’s own foundry 18 • Made of solid bronze • Hand polished to a mirror finish • Varnished Teak Handles • * 1″ straight bore

96

Edson’s Steering Wheel brochure (pictured left) is available. To discuss your application or to obtain more information contact us on phone 09 448 5900, info@sopac.co.nz or at www.sopac.co.nz.

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


STEERING WHEELS

LEATHER WHEEL RIM COVERS

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

97


COOKING & GALLEY

MAGMA GRIDDLE / HOT PLATES Take charge of mealtime and serve like a pro with the New Magma “Non-Stick” Griddles. These griddles are constructed entirely of heavy duty 400 series cast aluminum and feature a “Non-Stick” coating for effortless meal preparation and clean up. Extremely durable, versatile, and available in a selection of sizes to meet your individual needs they are perfect on the grill or on the stove top. Reversible, the griddle is ideal for breakfasts with family and friends; flip it over and you’ve got a grill for cooking sizzling meats and veggies. A deep drainage channel on the grilling side keeps the grease away from the cooking surface; while the griddle has a high tapered rim to keep the food on the griddle and reducing the amount of cooking mess. A removable, rubber coated, stainless steel handle lets you cook and serve with ease. Dishwasher and oven safe. You’ll never run out of recipes to try on these handy cooking tools.

A10-196 ROUND REVERSIBLE GRIDDLE ROUND, 12” (30.5 CM) DIA. • FOR ALL ROUND BBQS

A10-195 RECTANGULAR REVERSIBLE GRIDDLE 8”X 17” (20 CM X 43 CM) • FOR CHEFSMATE & NEWPORT BBQS

A10-197 RECTANGULAR REVERSIBLE GRIDDLE 12” X 18” (31 CM X 46 CM) • FOR CATALINA & MONTEREY BBQS

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

99


COOKING & GALLEY

MAGMA ROUND BBQS BUDGET BBQ - HINGED LID This grill was designed for economy without sacrificing functionality. Made of 100% 18-9 mirror polished stainless steel, it will give you the safety, durability and performance required of a marine grill. It uses our time-tested, highly efficient radiant plate heat distribution system in conjunction with convection heating technology to achieve hot, even temperatures while using a minimum of fuel. It comes to temperature very quickly and is great for searing steaks or just grilling some burgers. The patented swiveling turbo venturi tube allows you to adjust the control valve inboard, outboard, left or right wherever it is most convenient to you. This design also allows for quick safe fuel canister changes even while grilling. The turbo venturi tube in combination with the newly designed burner virtually eliminates blow-outs. The grill quickly disassembles without tools for easy clean-up. • Mounts and fuel canisters sold separately • Now with patented Radiant Plate and Dome System • Attached grill and lid. Lid acts as wind shield in gusty wind conditions. • Magma’s patented design utilizes convection cooking to give the hottest temperature with the least amount of fuel • Newly designed, swiveling, wind proof turbo venturi & control valve design virtually eliminates blow-outs and places the fuel & valve where it is convenient to you allowing safe and easy fuel changes. • Uses standard, disposable propane canisters or can adapt to on-board LPG or CNG systems. • Magma offers the largest selection of mounting options and accessories to customize your grill for your application.

Code

Lid Type

Type

Grill Size (Diameter)

A10-205L A10-206G A10-215L A10-216G

Hinged Hinged Hinged Hinged

LPG GAZ LPG GAZ

380 mm (15″) 380 mm (15″) 430 mm (17″) 430 mm (17″)

Notes • Requires grill mounting hardware for complete installation. • All replacement parts are in stock and readily available.

ROUND BBQ COVERS Water and fade resistant Sunbrella® boat cover material resists damage from sunlight and mildew.

5 year warranty covers the fabric becoming unserviceable because of loss of strength from normal exposure conditions including sunlight, mildew, rot and atmospheric chemicals. 1 year warranty on all other components.

100

Code

Colour

To Fit

A10-191FG A10-492FG A10-191PB A10-492PB A10-191BU A10-492BU A10-191JB A10-492JB A10-191RB A10-492RB A10-191CN A10-492CN

Forest Green

Original Size Party Size Original Size Party Size Original Size Party Size Original Size Party Size Original Size Party Size Original Size Party Size

Pacific Blue Burgundy Jet Black Royal Blue Captains Navy

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


COOKING & GALLEY

MARINE KETTLE II HINGED LID The Marine Kettle 2 is user friendly -- even in the wind. Its dependability in a stiff breeze is due to a virtual blow-out proof turbo venturi and valve system. It includes a front mounted piezo igniter, as well as a patented burner and heat distribution system that reduces flares-ups. The burner also adds years of life to the grill by directing more heat to the cooking surface. These grills have full, double lined inner safety shells to keep the outside of the grill cooler. A mirror polished, 18-9 marine‑grade stainless exterior finish provides superior corrosion resistance. On the top is a polished, stainless “Stay Cool” handle. The hinged lid is balanced so it won’t slam shut as the boat rolls. Magma’s patented plate and dome system make it the only boat grill that is truly a grill, stove or oven -- a great advantage to boats without a galley, or if the first mate just wants to cook outdoors. The grills feature a new cast stainless indexing bracket and clamp to provide easier, more positive level mounting. It uses standard, disposable, canisters or will easily adapt to the boat’s existing onboard LPG system. The newly designed valve system adjusts left, right, inboard or outboard for easy heat control access and fuel-bottle change. • • • • • • • •

The newly designed, swiveling, wind proof turbo venturi valve design eliminates blow-outs and places the fuel & valve where it is convenient to you, allowing for safe & easy fuel changes. The hinged lid is balanced and will not slam shut. Reliable Piezo Igniter. Dependable push button lighting. High tech radiant plate & dome heat distribution design means less flare up, even heat distribution & longer grill life. Use as a grill, stove or oven. Perfect even heat as a grill or direct open flame cooking as a stove. “Stay Cool” handle with air cooled supports. Cast 18-9 Stainless. Cast 18-9 stainless L-bracket mount clamp, indexed for non-slip level mounting. Double lined stainless steel inner safety shell. Cooler for safety. Guards against discolouration. Adds years of life to the grill. Magma’s patented design utilizes convection cooking to give the hottest temperature with the least amount of fuel. Runs on standard, disposable propane canisters or can adapt to on‑board LPG systems.

Notes • Requires grill mounting hardware for complete installation. • Radiant burner plate & dome system, indexing bracket and clamp, and turbo venturi tube are available to upgrade earlier Magma Gas grills. • Replacement parts are stocked in NZ and readily available. • Mounts and fuel canisters sold separately

Code

Description

Grill Size Diameter

A10-207L A10-208G A10-217L A10-218G

Marine Kettle II BBQ for LPG only – Original Size Marine Kettle II BBQ for GAZ only – Original Size Marine Kettle II BBQ for LPG only – Party Size Marine Kettle II BBQ for GAZ only – Party Size

380 mm (15″) 380 mm (15″) 430 mm (17″) 430 mm (17″)

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

101


COOKING & GALLEY

ROUND BBQ MOUNTS POW’R GRIP ROD HOLDER MOUNT Code

Size

A10-175

Fits all standard rod holders

Made of 18-8 stainless steel and durable all weather plastic, this vastly improved versatile mount fits most cylindrical type rod holders. It allows grills to mount in any direction from the rod holder. Its unique quick disconnect system allows instant installation or storage after use without tools. Rod holder not included.

ROUND RAIL MOUNT Code

Rail Size

A10-080 A10-085 A10-090

1″ (22 or 25.5 mm) 1-1/4″ (28.5 or 32 mm) 1-1/2″ (38 mm)

Fits any angle railing & detaches quickly for storage without tools to leave no hardware on the rail when not in use.

SQUARE RAIL / BULKHEAD MOUNT Code

Size

A10-240

Fits Rails up to 2-1/4″ (57 mm) high

Mount to any vertical flat surface such as bulkheads, hulls, transoms or cabin sides. Also mounts to square or flat rails. Fits horizontal rails up to 2-1/4” (57 mm) high by any depth or vertical rails up to 1- 5/8″ (41 mm) wide by any depth. The rod portion of mount quickly disconnects for easy storage. Some fasteners required for installation.

DECK SOCKET MOUNT Code

Fits

A10-121

All Magma Round BBQs

This mount is made of 18-8 stainless steel and triple chrome plated brass. A stainless detent pin lets the grill rotate and lock in four different positions. The rod portion of mount quickly disconnects for compact storage. Some fasteners required for installation.

MOUNT EXTENSION Code

Size

A10-140 Adds 8″ (200 mm) to any ‘A10’ series mounting bracket This all 18-8 stainless steel extension adds 8” (20 cm) to all Magma “A10” series “Marine Kettle”® grill mounting brackets.

ON SHORE LEGS Code

Fits

A10-650

All Magma Round BBQs

Cook onshore with this 18-8 stainless steel and brass grill stand. It easily collapses for flat compact storage without tools. Not for use on boats.

102

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


COOKING & GALLEY

MAGMA GOURMET BBQS NEWPORT GOURMET BBQ • • • • • • • • • •

Full size inner safety shell funnels grease into front-access grease tray reducing flare-up and heat discolouration. Reliable piezo crystal ignition for instant start up. 100% 18-9 mirror polished stainless steel for lasting beauty and superior corrosion resistance. Convenient snap-out dual radiant plate allows quick, easy clean-up and perfect even heat distribution. 9″ x 18″ cooking grill with tightly spaced grid struts, perfect for grilling food of all sizes. Easy to read all stainless steel hermetically sealed thermometer with 400° C safety glass. Oversized perfectly balanced lockable lid won’t slam shut and secures all inner components for transport. Full-length handle gives access from either side and makes mounting and transport of the grill easy. Swiveling valve regulator. Allows quick gas bottle exchange. Can be supplied to operate from either LPG or camping GAZ cylinders.

Note: Mounts and gas bottles are not supplied with BBQ. Code

Description

Size width x depth

A10-918L A10-918G

Newport BBQ for LPG only Newport BBQ for GAZ only

460 x 230 mm (18″ x 9″) 460 x 230 mm (18″ x 9″)

CATALINA GOURMET BBQ • • • • • • • • • •

Full size inner safety shell funnels grease into front-access grease tray reducing flare-up and heat discolouration. Reliable piezo crystal ignition for instant start up. 100% 18-9 mirror polished stainless steel for lasting beauty and superior corrosion resistance. Convenient snap-out dual radiant plate allows quick, easy clean-up and perfect even heat distribution. Large upper grill for slow grilling or for warming. Easy to read all stainless steel hermetically sealed thermometer with 400° C safety glass. Oversized perfectly balanced lockable lid won’t slam shut and secures all inner components for transport. Full-length handle gives access from either side and makes mounting and transport of the grill easy. Swiveling valve regulator for quick gas bottle exchange. Can be supplied to operate from either LPG or camping GAZ cylinders.

Note: Mounts and gas bottles are not supplied with BBQ. Code

Description

Main Grill Size

2nd level Grill Size

A10-1218L A10-1218G

Catalina BBQ for LPG only Catalina BBQ for GAZ only

460 x 300 mm (18 x 12″) 460 x 300 mm (18 x 12″)

460 x 150 mm (18 x 6″) 460 x 150 mm (18 x 6″)

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

103


COOKING & GALLEY

MONTEREY GOURMET BBQ Large enough to provide a banquet for even the hungriest crew, the Monterey offers features usually only found in the largest back yard grills, yet is designed specifically for use on your boat. The Monterey mounts easily and disassembles quickly for cleaning. The fuel efficient primary grill comes to high, even temperatures very quickly for searing steaks and roasts. The secondary grill is perfect for slow grilling of fish, vegetables or warming breads. The Monterey certainly “cooks as good as it looks.” Uses low pressure, pre-regulated on-board LPG (propane) systems. We recommend the “Heavy Duty” Mounting hardware on this model. • • • • • • • • • •

Full size inner safety shell funnels grease into front-access grease tray reducing flare-up and heat discolouration. Reliable piezo crystal ignition for instant start up. 100% 18-9 mirror polished stainless steel for lasting beauty and superior corrosion resistance. Convenient snap-out dual radiant plate allows quick, easy clean-up and perfect even heat distribution. Large cooking grill with tightly spaced grid struts, perfect for grilling food of all sizes. Large upper grill for slow grilling or for warming. Easy to read all stainless steel hermetically sealed thermometer with 400° C safety glass. Oversized perfectly balanced lockable lid won’t slam shut and secures all inner components for transport. Full-length handle gives access from either side and makes mounting and transport of the grill easy. Swiveling valve regulator for quick gas bottle exchange.

Note: Mounts and gas bottles are not supplied with BBQ.

104

Code

Description

Main Grill Size

2nd level Grill Size

A10-1225L

Monterey BBQ for LPG only

610 x 300 mm (24 x 12″)

610 x 140 mm (24 x 6″)

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


COOKING & GALLEY

CONNOISSEUR GAS GRILLS TRAILMATE™ GAS GRILL Small compact and powerful, the TrailMate is perfect for on-board or on-shore use. Fold-down legs give this grill the go-anywhere capability to enhance your outdoor activities. ‘Wind tested’ for perfect even heat distribution. The TrailMate matches the high grilling performance standards set by Magma larger grills. Designed for beauty and performance, the TrailMate is constructed flawlessly from mirror-polished all marine grade stainless steel for years of dependable service. • • • • • • • •

Fold-Away legs - perfect for that quick picnic on shore. Inner Safety Shell. Funnels grease into front access grease tray - reducing flare-up and heat discolouration. 100% 18-9 mirror polished stainless steel for lasting beauty and superior corrosion resistance. Convenient Snap-out radiant plate allows quick, easy clean‑up and perfect even heat distribution. Oversized perfectly balanced lockable lid so it won’t slam shut and secures all inner components for transport. Full-length handle - gives access from either side and makes mounting and transport easy. Front access, lock-in-place grease tray.

Shown with A10-902 Serving Shelf. Serving shelf and fuel canister are sold separately. Code

Description

Lid Type

Grill Size

A10-801L A10-802G

TrailMate BBQ for LPG only TrailMate BBQ for GAZ only

Hinged Hinged

230 x 305 mm (9 x 12″ ) 230 x 305 mm (9 x 12″ )

Notes • • • •

The fold-away legs are not recommended for use on-board. Optional mounting hardware is available for mounting for on-board use. All replacement parts are in stock and readily available. Mounts and fuel canisters sold separately

CHEFSMATE™GAS GRILL Meticulous attention to even the smallest details creates the finest value grill available. Wind tested for perfect even heat distribution, this grill offers the cooking performance usually only found in large back yard grills costing much more. Easily transported, the FoldAway legs are out of the way on-board, but readily available for that quick picnic on shore. The Snap-out radiant plate provides easy access for clean up yet allows the flame kissed flavour that makes for really memorable meals on onboard or ashore. Designed for beauty and performance, you’ll find that the Chef’sMate is constructed flawlessly for years on dependable use. • • • • • • • •

Fold-Away legs - perfect for that quick picnic on shore. Inner Safety Shell.- funnels grease into front access grease tray reducing flare-up and heat discolouration. 100% 18-9 mirror polished stainless steel for lasting beauty and superior corrosion resistance. Convenient Snap-out radiant plate. This allows for quick, easy clean-up and perfect even heat distribution. Oversized perfectly balanced lockable lid which won’t slam shut and secures all inner components for transport. Full-length handle - gives access from either side and makes mounting and transport easy. Front access, lock-in-place grease tray. Swiveling valve/ regulator - allows quick and safe gas bottle exchange.

Shown with A10-902 Serving Shelf. Serving shelf and fuel canister are sold separately.

With T10-185 Pedestal mount (sold separately) Code

Description

Lid Type

Grill Size

A10-803L A10-804G

ChefsMate BBQ for LPG only ChefsMate BBQ for GAZ only

Hinged Hinged

230 x 460 mm (9 x 18″) 230 x 460 mm (9 x 18″)

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

Notes • • • •

The fold-away legs are not recommended for use on-board. Optional mounting hardware is available for mounting for on-board use. All replacement parts are in stock and will be readily available. Serving shelf and fuel canisters are sold separately.

105


COOKING & GALLEY

GOURMET & CONNOISSEUR MOUNTS “POW’RGRIP™ LEVELOCK”™ DOUBLE LOCKING Just when you thought it couldn’t get any better… this mount adjusts and locks in place at both ends. We’ve joined the T10-355 “LeveLock” Adjustable Fish Rod Holder Mount above, with the “Pow’rGrip” Adjustable Fish Rod Holder Mount. This allows the “Pow’rGrip portion of the mount to adjust to any size rod holder and lock in place, while the “LeveLock” portion of the mount, adjusts and locks your Magma rectangular grill: Tournament Series Table; or Traditional Single Mount Table to any desired position. With larger Tournament Series tables, use the “LeveLegz”™ Table Support Legs to level and support even the largest bait or fillet project. This patented mount is the strongest, most corrosion resistant, most versatile mount in the industry.

Code

Description

T10-375

“Pow’rGrip™ LeveLock”™ Double Locking Fish Rod Holder Mount

LEVELOCK ROD HOLDER MOUNT Code

Fits

T10-355

Newport only

Made of heat treated stainless steel and hard anodized aluminium this is one of the strongest mounts available. The quick release cam-action lever allows instant levelling without tools. Fits most cross pin type rod holders. Folds flat for compact storage with the grill.

LOCKING FLUSH DECK SOCKET MOUNT Code

Type

Fits

T10-326 T10-526

Single Dual

Newport Catalina, Monterey

This attractive mirror polished 18-8 stainless steel flush deck socket set features a push button lock pin and includes a flange gasket with integral flip-up water seal cap. Some fasteners required for installation.

LOCKING SURFACE DECK SOCKET MOUNT Code

Type

Fits

T10-321 T10-521

Single Dual

Newport Catalina, Monterey

This attractive mirror polished 18-8 stainless steel deck socket set features a push button locking pin and a water drainage hole in the side of the socket. Some fasteners required for installation.

HORIZONTAL ROUND RAIL MOUNT Code

Type

Size

Rail Size

T10-380 T10-385

Single Single

Small Large

1″ (22 or 25.5 mm) 1-1/4″ (28.5 or 32 mm)

Extremely strong and features 2-way adjustment for perfect horizontal levelling. Quickly detaches without tools for compact storage leaving no hardware on the rail.

106

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


COOKING & GALLEY

SOCKET TYPE MOUNT Code

Type

Fits

A10-160

Single

Newport Only

Socket mount for Tempress Fish On & Roberts Rod Holder Sockets. Quickly disconnect without tools for compact storage with the grill. Rod holder sockets not included.

SQUARE RAIL / BULKHEAD MOUNT Code

Type

Fits

T10-340 Single Newport T10-540 Dual Catalina, Monterey This mount attaches to flat surfaces such as bulkheads, hulls, transoms or cabin sides. Also mounts to square or flat rails. Fits horizontal rails up to 2-1/4″ (57 mm) high by any depth or vertical rails up to 1-5/8″ (41 mm) wide by any depth. Some fasteners required for installation.

LEVELOCK - VERTICAL ROUND RAIL MOUNT Code

Size

Dimensions

T10-780 T10-785

Small Large

1″ (22 or 25.5 mm) 1-1/4″ (28.5 or 32 mm)

This mount combines the versatility of the popular “LeveLock”® all-angle mount for instantaneous levelling, with our sturdy out-over-the-water vertical Round Rail Mount. Quickly disassembles without tools and leaves no hardware on the rail. Not Recommended for the A10-1225 ‘Monterey’

EXTENDED HORIZONTAL ROUND RAIL MOUNT Code

Size

Dimensions

T10-680 T10-685

Small Large

1″ (22 or 25.5 mm) 1-1/4″ (28.5 or 32 mm)

This round rail mounting bracket allows mounting of Gourmet Grills out over the water. The quick-disconnect system allows quick removal without leaving any hardware on the rail. Not Recommended for the A10-1225 ‘Monterey’

ON SHORE STAND Code

Fits

T10-655

Fits all gourmet BBQs

Use your Gourmet Series Grill on-shore, on the dock, at home or camping with these all 18-8 stainless steel legs. They are extremely strong and rugged making them a great camping accessory. Not recommended for use on boats.

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

107


COOKING & GALLEY

DOUBLE LOCKING “STOWABLE” PEDESTAL MOUNT 28” (71 CM) Mount any Magma “Gourmet Series” or “Connoisseur Series” Gas Grill or any Magma “Single Mount” Table with this “easy-on/easy-off” pedestal mount. A great way to mount a Magma Rectangular Grill or Table to a swim step, a Pontoon/Party Boat, or even to a deck or patio at home. Surface mounted so there’s no large hole to drill.

Shown with T10-420 Tournament Series Table. Code

Size

Description

T10-185

71 cm (28″)

Double Locking “Stowable” Pedestal Mount

T10-185 with A10-1218 “Catalina”.

GOURMET BBQ COVERS Code

Colour

Newport

A10-990FG A10-1290FG

Forest Green

A10-1290PB

Pacific Blue

A10-990BU

Newport Jet Black

A10-990RB

Water and fade resistant Sunbrella® boat cover material resists damage from sunlight and mildew.

108

Newport Royal Blue

A10-990CN A10-1291CN

Catalina Monterey

A10-1291RB A10-1290CN

Catalina Monterey

A10-1291JB

5 year warranty covers the fabric becoming unserviceable because of loss of strength from normal exposure conditions including sunlight, mildew, rot and atmospheric chemicals. 1 year warranty on all other components.

Catalina Monterey

A10-990JB

A10-1290RB

Catalina

Newport Burgundy

A10-1291BU A10-1290JB

Newport Monterey

A10-1291PB A10-1290BU

Catalina Monterey

A10-1291FG A10-990PB

To Fit

Newport Captains Navy

Catalina Monterey

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


COOKING & GALLEY

CARTRIDGES The mix is recommended for better performance at low temperatures. • Contains Butane/Propane mix

Code

Description

GCA 1012

GAZ 470 Cartridge (450gm)

VALVES REGULATOR VALVES For pre-regulated, low pressure, on-board LPG (propane) and CNG (natural gas) systems, this stainless steel and brass control valve is designed to connect to the low pressure side of the regulator. Hose and fittings not included.

Code 10-267 10-269

Description GAZ Low Output GAZ Medium Output

Code 10-221N 10-223 10-224

Note: Each regulator valve is colour coded: - No paint denotes for low output - Green paint denotes for medium output - Yellow paint denotes for high output

Description LPG Low Output LPG Medium Output LPG High Output

BBQ/Grill

Valve

A10-007L A10-008G

10-221N

A10-017L A10-018G A10-105L A10-106G A10-205L A10-206G A10-207L A10-208G A10-215L A10-216G A10-217L A10-218G A10-801L A10-801G A10-803L A10-803G A10-804G A10-918L A10-918G A10-1218L A10-1218G A10-1225

10-221N

10-267 10-267 10-221N 10-267 10-221N 10-267 10-221N 10-267 10-221N 10-267 10-221N 10-267 10-221N 10-267 10-221N 10-267 10-267 10-221N 10-267 10-223 10-269 10-224

BBQ ACCESSORIES MARINE CUISINE BBQ COOK BOOK From Cornish game hens to great hamburgers, this book contains 130 pages of easy to prepare barbecue delights, useful recommendations, techniques, hints and accessory ideas for a better grilling experience. Recipes are designed to use a minimum of ingredients and are exclusively prepared for the “Marine Kettle”® Grill. Code

Description

A10-270

Cook book

5th Edition.

SERVING SHELF WITH CUTTING BOARD Code

Fits

A10-902

All Gourmet BBQs & Connoisseur Grills

18-8 Stainless Steel detachable Serving Shelf with U.V. Stabilized High-Density, FDA approved Polyethylene cutting board. Attaches and detaches instantly for quick and easy clean-up or storage. Stores inside of grill when not in use. Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

109


COOKING & GALLEY

STAINLESS STEEL WOK WITH LID The ancient culinary art of wok cooking is now available in 100% 18-8 stainless steel. This high quality, beautiful wok is perfectly proportioned to fit the Magma Marine Kettles® or your in-home or on-board appliances. Code Diameter A10-290

419 mm (16 1/2″)

FISH & VEGE GRILL TRAY For grilling flaky fish, vegetables, and small food items, or use it inside the Wok as a steamer tray. Keeps small delicacies from falling through the grill. The removable, rubber coated handle makes the tray easy to use and to stow. The non-stick version is coated with Teflon® Select for unsurpassed durability. Code

Material

Diameter

A10-295 A10-296

304 Stainless Steel 304 Stainless Steel with Teflon

349 mm (13 3/4″) 349 mm (13 3/4″)

9 PIECE S/STEEL ‘NESTING’ COOKWARE SET A Magma quality 18-10 stainless steel cook-ware set that nests for storage in less than 1/2 cubic foot of cabinet space. The set includes: • 3x saucepans (1-1/2 qt., 2 qt., and 3 qt.) • 1x lid that fits all three saucepans • 1x 5 qt. Stock Pot • 1x 9-1/2 inch diameter Saute Pan (also serves as a lid for the Stock Pot) • 2x removable handles With a convenient “Bungee” storage cord. All have perfectly flat triple clad bottoms (ss-aluminium-ss) for even heat distribution on gas, electric or ceramic cooktops. Oven safe and dishwasher friendly. Yacht quality cookware at a value price.

110

Code

Material

A10-360 A10-365

Stainless Steel Stainless Steel with Teflon

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


COOKING & GALLEY

MAGMA BAIT TABLES ECONOMATE BAIT & FILLET TABLE Code

Size

Dimensions

T10-310 T10-311

Large Small

510 x 410 mm (20 x 16″) 310 x 410 mm (12 x 16″)

Fillet knife and pliers not included.

The versatile Econo-Mate bait and fillet table is made of FDA approved, UV stabilized, high-density polyethylene for mildew free, crack free, and maintenance free use. It won’t absorb fish odours, It attaches and detaches instantly with a stainless steel push/pull pin and folds completely flat for compact storage.

BAIT/FILLET MATE CUTTING & SERVING TABLE Code

Size

Dimensions

T10-302 T10-303

Small Large

325 x 510 mm (12 3/4 x 20″) 320 x 790 mm (12 1/2 x 31″)

This table features 2 fillet knife holders and a handy receptacle for your fishing pliers. The slot at the back of the table permits water drainage from the work surface. The “Bait/Fillet Mate” is virtually indestructible. It doesn’t absorb fish odour, will not crack or mildew and is maintenance free. Made of the finest commercial cutting board material available; FDA approved and UV stabilized high-density polyethylene.

FIRST MATE - DUAL MOUNT TABLE Code

Size

Dimensions

T10-503 Small 320 x 790 mm (12 1/2 x 31″) T10-504 Large 320 x 1040 mm (12 1/2 x 41″) A much larger version of the “Single-Mount” tables and a perfect compliment to your Magma BBQ. The heavy-duty “Dual-Mount” design gives you the strength of a work bench with the convenience of Magma’s quick mount system for compact storage. Features large water drainage slots, two fillet knife holders, a receptacle for your fishing pliers, and 4″ high side and back guard rails. Virtually indestructible,

doesn’t absorb fish odour, will not crack, or mildew and is maintenance free. Made with FDA approved and UV stabilized high-density polyethylene. Fillet knives and pliers not included.

TOURNAMENT SERIES™ BAIT/FILLET™ TABLE W/“LEVELOCK”™ ADJUSTABLE FISH ROD HOLDER MOUNT This injection molded polyethylene bait and fillet table is U.V. stabilized a hard anodized T10-355 “LeveLock”™ adjustable fish rod holder mount included. It will not fade, chip, crack, or hold fish odours. It is strong and lightweight and includes slots for pliers and fillet knives and a molded‑in ruler for measuring fish. It can be used with Magma’s single or dual mounts for rectangular grills or tables that you already stock. 51 cm (20″) long, 41 cm (16″) deep & 11 cm (4-1/2″) high Note: Not compatible with T10-350 “old style” “LeveLock”™ Adjustable Rod Holder Mounts. Available from Oct 2008

Code

Description

T10-421

Tournament Series™ Bait/Fillet™ Table with “LeveLock”™ Adjustable Fish Rod Holder Mount

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

111


COOKING & GALLEY

TOURNAMENT SERIES™ BAIT/FILLET™ TABLE WITH POW’RGRIP™ LEVELOCK™ ADJUSTABLE FISH ROD HOLDER MOUNT Injection molded polyethylene bait table with a T10-375 “Pow’rGrip™ LeveLock”™ Double Locking Adjustable Fish Rod Holder Mount included. This fillet table is U.V. stabilized and will not fade, chip, crack, or hold fish odours. It is strong and lightweight and includes slots for pliers and fillet knives and a molded-in ruler for measuring fish. It can be used with Magma’s single or dual mounts for rectangular grills or tables that you already stock. 86 cm (34″) long, 41 cm (16″) deep & 11 cm (4-1/2″) high Note: Not compatible with T10-350 “old style” “LeveLock”™ Adjustable Rod Holder Mounts.

Code

Description

T10-422

Tournament Series™ Bait/Fillet™ Table with “LeveLock”™ Adjustable Fish Rod Holder Mount

TOURNAMENT SERIES™ BAIT/FILLET™ TABLE WITH “LEVELOCK”™ ADJUSTABLE FISH ROD HOLDER MOUNT This injection molded polyethylene bait and fillet table is U.V. stabilized with a hard anodized T10-355 “LeveLock”™ adjustable fish rod holder mount included. It will not fade, chip, crack, or hold fish odours. It is strong and lightweight and includes slots for pliers and fillet knives and a molded‑in ruler for measuring fish. It can be used with Magma’s single or dual mounts for rectangular grills or tables that you already stock. The perfect table for bait preparation, filleting fish, or food service. 86 cm (34″) long, 41 cm (16″) deep & 11 cm (4-1/2″) high Note: Not compatible with T10-350 “old style” “LeveLock”™ Adjustable Rod Holder Mounts.

Code

Description

T10-435

Tournament Series™ Bait/Fillet™ Table with “LeveLock”™ Adjustable Fish Rod Holder Mount

BAIT TABLE MOUNTS LOCKING FLUSH DECK SOCKET MOUNT Featuring a push button lock pin and includes a flange gasket with integral flip-up water seal cap. Some fasteners required for installation. Code

Type

Fits

T10-326 T10-526

Single Dual

Single Mount Tables Dual Mount Tables

LOCKING SURFACE DECK SOCKET MOUNT Featuring a push button locking pin and a water drainage hole in the side of the socket. Some fasteners required for installation. Code

Type

Fits

T10-321 T10-521

Single Dual

Single Mount Tables Dual Mount Tables

“POW’RGRIP™ LEVELOCK”™ DOUBLE LOCKING Just when you thought it couldn’t get any better… this mount adjusts and locks in place at both ends. We’ve joined the T10-355 “LeveLock” Adjustable Fish Rod Holder Mount above, with the “Pow’rGrip” Adjustable Fish Rod Holder Mount. This allows the “Pow’rGrip portion of the mount to adjust to any size rod holder and lock in place, while the “LeveLock” portion of the mount, adjusts and locks your Magma rectangular grill: Tournament Series Table; or Traditional Single Mount Table to any desired position. With larger Tournament Series tables, use the “LeveLegz”™ Table Support Legs to level and support even the largest bait or fillet project. This patented mount is the strongest, most corrosion resistant, most versatile mount in the industry.

112

Code

Description

T10-375

“Pow’rGrip™ LeveLock”™ Double Locking Fish Rod Holder Mount Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


COOKING & GALLEY

SOCKET TYPE ROD HOLDER MOUNT Fits Tempress Fish-On® & Roberts Rod Holder Sockets (sold separately) Code

Type

Fits

T10-360

Single

Single Mount Tables only

LEVELOCK ROD HOLDER MOUNT Quick release cam-action design allows convenient all angle adjustment. The 1-1/2” (38 mm) 18-8 stainless steel tube fits into most “cross pin” type rod holders in 8 different rotational positions. Folds flat for compact storage. Code

Fits

T10-355

Fits all single mount bait tables

SINGLE DECK SOCKET MOUNT This mount is made of 18-8 stainless steel and triple chrome plated brass. A stainless detent pin lets the table rotate and lock in four different positions. Code

Type

Fits

T10-321

Single

Single Mount Tables

Some fasteners required for installation.

HORIZONTAL ROUND RAIL MOUNT Code

Type

Size

Rail Size

T10-380 T10-385 T10-580 T10-585

Single Single Dual Dual

Small Large Small Large

1″ (22 or 25.5 mm) 1 1/4″ (28.5 or 32 mm) 1″ (22 or 25.5 mm) 1 1/4″ (28.5 or 32 mm)

SQUARE RAIL / BULKHEAD MOUNT Attaches to any vertical flat surface such as bulkheads or mounts to square or flat rails. Fits horizontal rails up to 57 mm (2-1/4″) high by any depth or vertical rails up to 41 mm (1-5/8″) wide by any depth. Code

Type

Rail Size

Fits

T10-340 T10-540

Single Dual

up to 2-1/4″ (57 mm) up to 2-1/4″ (57 mm)

Single Mount Tables Dual Mount Tables

Some fasteners required for installation.

TABLE HEIGHT EXTENSION KIT Code

Extension

Fits

T10-511 T10-512

150 mm (6″) 300 mm (12″)

Dual Deck Socket Mount Tables Dual Deck Socket Mount Tables

DOUBLE LOCKING “STOWABLE” PEDESTAL MOUNT Mount any Magma “Gourmet Series” or “Connoisseur Series” Gas Grill or any Magma “Single Mount” Table with this “easy-on/easy-off” pedestal mount. A great way to mount a Magma Rectangular Grill or Table to a swim step, a Pontoon/Party Boat, or even to a deck or patio at home. Surface mounted so there’s no large hole to drill. Shown with T10-420 Code Size Description Tournament Series Table. T10-185

71 cm (28″)

Double Locking “Stowable” Pedestal Mount

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

113


COOKING & GALLEY

MAGMA BBQ REPLACEMENT PARTS Marine Kettle Kettle Replacement Replacement Parts Parts Marine

CHARCOAL BBQ BBQ CHARCOAL

A10-014 A10-014 PARTY SIZE SIZE PARTY

A10-004 A10-004 ORIGINAL SIZE SIZE ORIGINAL 10-010 10-010 Knob & & Finger Finger Knob Guard Assembly Guard Assembly

A M

GM

A PRODU C T S

MARINE KETTLE A M

GM

A PRODU C T S

MARINE KETTLE

10-010 10-010 Knob & & Finger Finger Knob Guard Assembly Guard Assembly

10-100 10-100 Lid Assembly Assembly Lid Complete Complete

10-400 10-400 Lid Assembly Lid Assembly Complete Complete

10-030 10-030 Draft Door Door Draft Assembly Assembly

10-431 10-431 Draft Door Draft Door Assembly Assembly

10-040 10-040 Cooking Grill Cooking Grill

10-441 10-441 Cooking Grill Grill Cooking

10-050 10-050 8" Lower 8" Lower Charcoal Grill Grill Charcoal

10-442 10-442 10" Lower 10" Lower Charcoal Grill Grill Charcoal

10-060 10-060 Bowl Assembly Bowl Assembly

10-461 10-461 Bowl Assembly Bowl Assembly

10-070 10-070 L-Bracket L-Bracket & Clamp Clamp & Assembly Assembly

10-070 10-070 L-Bracket L-Bracket & Clamp Clamp & Assembly Assembly

114

A M

GM

A PRODU C T S

MARINE KETTLE A M

GM

A PRODU C T S

MARINE KETTLE

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

MAGMA PRODUCTS, INC. • 3940 PIXIE AVE. • LAKEWOOD, CA 90712 • TEL (562) 627-0500 • FAX (562) 627-0550


COOKING & GALLEY

Marine Kettle Replacement Parts Marine Kettle Replacement Parts

A10-005/6A10-006 Marine Kettle Gas (Export) Grill Pre 2007 GAS BBQ A10-006 GAS BBQ (Export)

10-152 10-152 Lid Assembly, LidComplete Assembly, Complete

10-151 10-151 Knob & Finger Knob & Finger Guard Assembly Guard Assembly

10-253 Cooking10-253 Grill Cooking Grill

10-156 10-156 Radiant Screen Screen &Radiant Retainer Pin & Retainer Pin 10-155 Retainer10-155 Pins Retainer Pins 10-259 Outer10-259 Bowl Outer Bowl 10-161 10-161 Grease Catch Pan Grease Catch Pan 10-160 10-160 TurboVenturi TurboVenturi Tube Tube 10-267 Control 10-267 Valve Control with Valve Regulator Regulator with International Collar International Collar OR

10-154 10-154 Briquets Ceramic Ceramic Briquets 10-657 10-657 Universal Universal Burner Replacement Replacement Burner 10-258 10-258 Flame Deflector Flame Deflector

10-164 10-164 & L-Bracket L-Bracket & Clamp Assembly Clamp Assembly

10-268 10-268 Collar Connect Connect Gaz" Collar "Camping "Camping Gaz"

MAGMA PRODUCTS, INC. • 3940 PIXIE AVE. • LAKEWOOD, CA 90712 • TEL (562) 627-0500 • FAX (562) 627-0550 10-221N • www.MagmaProducts.com MAGMA PRODUCTS, email: •Mail@MagmaProducts.com 3940 PIXIE AVE. • LAKEWOOD, CA 90712 • TEL (562) 627-0500 • FAX (562) 627-0550 LPG Pre - RegulatedINC. Valve © 2004 MAGMA PRODUCTS, INC. email: Mail@MagmaProducts.com • www.MagmaProducts.com Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

5/04

© 2004 MAGMA PRODUCTS, INC. 5/04

115


COOKING & GALLEY

M a r in e K ettle R epla cem en t P a r ts Marine Kettle Replacement Parts

A10-005/6 Kettle Gas Grill A 1&0 A10-105/6 -0 0 6 G A S B BMarine Q (E xport) A10-006 GAS BBQ (Export) 2007 - now

10-152 10-152 Lid Assembly, Lid Assembly, Complete Complete

10-151 Knob 10-151 & Finger & Finger GuardKnob Assembly Guard Assembly

10-253 10-253 Cooking Grill Cooking Grill

10-156 10-156 Radiant Screen Radiant & Retainer PinScreen & Retainer Pin 10-155 10-155 Retainer Pins Retainer Pins 10-259 O uter Bow10-259 l Outer Bowl 10-161 10-161 Grease Catch Pan Grease Catch Pan 10-160 10-160 TurboV enturi TurboVenturi Tube Tube 10-267 10-267 Control V alve Control Regulator w ithValve Regulator International Collar with International Collar OR

10-154 10-154 Ceramic Briquets Ceramic Briquets 10-466 Radiant Plate

10-657 10-657 Universal UniversalBurner Replacement Replacement Burner 10-258 Flame10-258 Deflector Flame Deflector

10-164 10-164/ 10-664 10-164 L-Bracket L-Bracket && L-Bracket ClampAssembly Assembly& Clamp

Clamp Assembly

10-268 10-268 Connect Collar Connect "Camping Gaz"Collar "Camping Gaz"

MA G MA PRO10-221N DUC TS, INC .LPG • 3940 PIXIE AV E. • LA KEW O O D, C A 90712 • TEL (562) 627-0500 • FA X (562) 627-0550 e m a il:INC. M a il@ Ma gm a Pro d uc•ts.c o m • www.M m a Pro uc (562) ts.c o m MAGMA PRODUCTS, • 3940 PIXIE AVE. LAKEWOOD, CAa g 90712 • dTEL 627-0500 • FAX (562) 627-0550 Pre - Regulated Valve © 2004 MAGMA PRO DUCTS, INC. email: Mail@MagmaProducts.com • www.MagmaProducts.com

116

5/04 Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited © 2004 MAGMA PRODUCTS, INC. 5/0 Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


COOKING & GALLEY

Marine Kettle Replacement Parts Marine Kettle Replacement Parts

COMBINATION GAS STOVE & GAS BBQ's (Export) COMBINATION GAS STOVE & GAS BBQ's (Export) A10-008 A10-018 A10-007/8 A10-017/8 10-151 Knob &10-151 Finger Guard Assembly Knob & Finger

A10-008 ORIGINAL SIZE ORIGINAL SIZE

10-151 Knob &10-151 Finger Guard Assembly Knob & Finger

A10-018 PARTY SIZE PARTY SIZE

Guard Assembly

Guard Assembly

10-452 Lid Assembly, 10-452 Lid Complete Assembly,

10-152 Lid Assembly, 10-152 Lid Complete Assembly,

Complete

Complete

10-153 Cooking Grill 10-153 Cooking Grill

10-453 Cooking Grill 10-453 Cooking Grill

10-665 Radiant Plate 10-665 & Dome Radiant Plate

10-665 Radiant Plate 10-665 & Dome Radiant Plate

10-657 Universal 10-657 Replacement Universal Burner Replacement Burner

Universal 10-657 Replacement Universal Burner Replacement Burner 10-458

&10-657 Dome

& Dome

Pan Inner Fire 10-458

10-158 Inner Fire Pan 10-158

Inner Fire Pan

Inner Fire Pan

10-459 Outer Bowl 10-459 Outer Bowl

10-159 Outer Bowl 10-159 Outer Bowl 10-161 Grease Catch Pan 10-161

10-161 Grease Catch Pan 10-161

Grease Catch Pan 10-164 / 10-164 10-664 L-Bracket & L-Bracket &10-164 Clamp ClampL-Bracket Assembly Assembly &

Grease Pan 10-164Catch / 10-164 10-664 L-Bracket &10-164 Clamp L-Bracket & Assembly ClampL-Bracket Assembly &

Clamp Assembly

Clamp Assembly

10-160 Turbo Venturi 10-160 Tube Turbo Venturi Tube

10-267 Control10-267 Valve Regulator with Control Valve International Collar Regulator with OR International Collar

10-160 Turbo Venturi 10-160 Tube Turbo Venturi Tube

10-268 Connect 10-268 Collar "Camping Gaz" Connect Collar "Camping Gaz"

10-267 Control10-267 Valve Regulator with Control Valve International Collar Regulator with

OR International Collar

10-268 Connect 10-268 Collar "Camping Gaz" Connect Collar "Camping Gaz"

10-221N MAGMA PRODUCTS, INC. • 3940 PIXIE AVE. • LAKEWOOD, CA 90712 •10-221N TEL (562) 627-0500 • FAX (562) 627-0550 LPG LPG email: Mail@MagmaProducts.com • www.MagmaProducts.com Pre - Regulated Valve MAGMA PRODUCTS, INC. • 3940 PIXIE AVE. • LAKEWOOD,Pre CA- 90712 • TELValve (562) 627-0500 • FAX (562) 627-0550 Regulated © 2004 MAGMA PRODUCTS, INC. email: Mail@MagmaProducts.com • www.MagmaProducts.com Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

0405

© 2004 MAGMA PRODUCTS, INC. 0405

117


COOKING & GALLEY

A10-207/8

10-164

10-267 OR 10-221N LPG Pre - Regulated Valve

118

Equipment Catalogue 2013 /JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


COOKING & GALLEY

A10-217/8

OR 10-221N LPG Pre - Regulated Valve Equipment Catalogue 2013/JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

119


rmet Replacement Parts C OSeries OKING & G ALLEY COOKING & GALLEY

Gourmet Series Replacement Parts

NEWPORT” MODEL A10-918

“NEWPORT” MODEL A10-918 G/L 10-952

10-952

Lid with lock,Lidhinge with lock, hinge set & wrench fastener set &fastener wrench (handle not included) (handle not included)

10-932

10-932

Lid hinge fastener set with wrench

10-951 set Lid hinge fastener with wrenchLid handle with fasteners

10-934 hatch kit with fasteners

10-951

Lid handle 10-953

10-954 10-953 10-953 Grill Grill grate grate(sold Grill grate each 3 required (Sold-each each 3required required (sold - -3grill) for complete for complete grill) for complete grill) with fasteners 10-965

Grill grate Radiant plate (Sold each - 310-957 required for completeBurner grill)with screw 10-958

10-965

Inner liner with electrode

Radiant plate 10-959

10-957

Outer shell 10-221N

Burner with screwLPG 10-958

Inner liner with electrode

Pre - Regulated Valve Or 10-263 10-267

Valve Regulator

10-962

Valve chamber cover with screws 10-960

10-959

Outer shell

Piezo igniter with wire & ceramic electrode with fasteners 10-045

Rubber feet 10-961

Grease catch pan 10-933 10-263 Mounting fastener pack

Valve Regulator 10-962

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

120 Valve chamber cover MAGMA PRODUCTS, INC. • 3940 PIXIE AVE. • LAKEWOOD, CA 90712 • TEL (562) 627-0500 • FAX (562) 627-0550 email: Mail@MagmaProducts.com • Website: www.magmaproducts.com with screws


LLEY COOKING

& GALLEY

rmet Series Replacement Parts

Gourmet Series Replacement Parts ODEL A10-918 “CATALINA” MODEL A10-1218 G/L

NEWPORT” MODEL A10-918 G/L

10-1270

Thermometer with fasteners 10-1252

10-952

Lid with lock, hinge fastener set & wrench (handle and thermometer not included)

10-952

Lid with lock,Lidhinge with lock, hinge fastener set & wrench fastener set & wrench (handle not included) Lid hinge fastener set (handle not included) with wrench 10-932

10-951

Lid handle with fasteners 10-1271

10-932Warming rack

10-934 hatch kit with fasteners

10-932

Lid hinge fastener set 10-1254 10-1253 with wrench Grill grate grate(sold Grill

each 3 required (Sold-each - 3 required for for complete completegrill) grill)

10-951 set Lid hinge fastener with fasteners Radiant plate with wrenchLid handle 10-965

10-951

Lid handle 10-953

10-954 10-95310-957 10-953 Burner with screw Grill Grill grate grate(sold Grill grate each 3 required (Sold-each each 3required required (sold - -3grill) 10-1258 for complete for complete complete grill) Inner liner for grill) with fasteners with electrode

10-965

Radiant10-1259 plate Outer shell

Grill grate 10-223 LPG (Sold each - 310-957 required Pre - Regulated Valve Or screw for completeBurner grill)with10-269 10-264

Valve Regulator

10-958

10-965

10-962 Inner liner Valve chamber cover with electrode with screws

Radiant plate

10-960

Piezo igniter with wire & ceramic electrode with fasteners

10-95910-045

10-957

Rubber feet Outer shell

10-221N

Burner with screw Grease LPG catch pan 10-961

Pre - Regulated Valve

10-933

10-958

Inner liner with electrode

Mounting fastener pack Or

10-263 10-267

Valve Regulator

MAGMA PRODUCTS, INC. 2013/JAN • 3940/PIXIE AVE. • Limited LAKEWOOD, CA 90712 • TEL (562) 627-0500 • FAX (562) 627-0550 Equipment Catalogue © So-Pac Marine Phone 09 448 5900 / Fax 09Mail@MagmaProducts.com 448 5911 / info@sopac.co.nz / www.sopac.co.nz email: • www.magmaproducts.com

121

© 2005 MAGMA PRODUCTS, INC. 1005


L L E CYO O K I N G

& GALLEY

rmet Series Replacement Parts

ODEL A10-918

Gourmet Series Replacement Parts “MONTEREY” MODEL A10-1225 G/L

“NEWPORT” MODEL A10-918 G/L

10-1270

Thermometer with fasteners 10-1052

Lid with lock, hinge fastener set & wrench (handle and thermometer not included)

10-952

10-952

Lid with lock,Lidhinge with lock, hinge fastener set & wrench fastener set & wrench (handle not included) Lid hinge fastener set (handle not included) with wrench 10-932

10-1051

Lid handle with fasteners 10-1071

10-932Warming rack

10-934 hatch kit with fasteners

Lid hinge 10-954fastener set 10-1253 with wrench Grill grate grate(sold each -each 4 required (Sold - 4 required for complete for completegrill) grill)

10-932

10-951 set Lid hinge fastener with fasteners Radiant plate with wrenchLid handle 10-1065

10-951

Lid handle

10-954 10-95310-1057 10-953 Burner with screw Grill Grill grate grate(sold Grill grate each 3 required (Sold-each each 3required required (sold - -3grill) 10-1058 for complete for complete grill) Inner liner for complete grill) with fasteners

10-953

with electrode

10-965

10-1059 Radiant plate Outer shell

Grill grate 10-224 LPG (Sold each - 310-957 required Pre - Regulated Valve Or screw for completeBurner grill)with10-270 10-265

Valve Regulator

10-958

10-962 Inner liner Valve chamber cover with electrode with screws

10-965

Radiant plate x4 x8

10-957

x4

10-960

Piezo igniter with wire & ceramic electrode with fasteners

10-95910-045

Outer Rubber shell feet 10-221N

Burner with screw Grease LPG catch pan 10-961

Pre - Regulated Valve

10-933

Inner liner with electrode

10-263 10-267

Valve Regulator

MAGMA PRODUCTS, INC. • 3940 PIXIE AVE. • LAKEWOOD, CA 90712 • TEL (562) 627-0500 • FAX (562) 627-0550 Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz email: Mail@MagmaProducts.com • 448 www.magmaproducts.com

122

1005

10-958

Mounting fastener pack Or


COOKING & GALLEY

A10-801NZ-3 TRAILMATE REPLACEMENT PARTS Code 10-922 10-934 10-936 10-921 10-955 10-923 10-927 10-928 10-929 10-966 10-931 10-924 10-933 10-221N 10-267 10-950

ll Replacement Parts

A10-803NZ-3 CHEFSMATE REPLACEMENT PARTS

Description

Code

Lid w/Lock, Hinge Fastener Set & Wrench (Handle not included) Latch kit w/ Fasteners Lid Hinge Fastener Set w/ Wrench Lid Handle w/ Fasteners 6” x 9” Grill Grate 9 Wire (2 required - sold individually) Radiant Plate Burner w/ Screw Inner Liner (two piece) Outer Shell w/Valve Chamber and Mounting Plate Cast Stainless Logo w/ Fasteners Rubber Feet Set of 4 Grease Catch Pan Mounting Fastener Pack LPG Pre-Regulated Valve Valve Regulator Leg Set w/ Fasteners

10-942 10-934 10-951 10-955 10-964 10-957 10-948 10-949 10-936 10-966 10-931 10-961 10-933 10-221N 10-267 10-950

Description Lid w/Lock, Hinge Fastener Set & Wrench (Handle not included) Latch kit w/ Fasteners Lid Handle w/ Fasteners 6” x 9” Grill Grate 9 Wire (3 required - sold individually) Radiant Plate Burner w/ Screw Inner Liner (two piece) Outer Shell w/Valve Chamber and Mounting Plate Lid Hinge Fastener Set w/ Wrench Cast Stainless Logo w/ Fasteners Rubber Feet Set of 4 Grease Catch Pan Mounting Fastener Pack LPG Pre-Regulated Valve Valve Regulator Leg Set w/ Fasteners

A10-803NZ-3 ChefsMate Gas Grill Replacement Parts

10-922 10-921 10-934 10-923 10-928

10-951 10-955 10-934 10-927

10-942 10-955

10-964 10-957 10-948

10-929 10-949 10-924

10-961 10-221N 10-267

10-221N 10-267

10-950 10-950 LEG SET AVAILABLE Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

123


ELECTRICAL

BATTERIES

THE HEART OF YOUR SYSTEM

LIFELINE PRODUCES THE HIGHEST QUALITY AGM BATTERIES FOR MARINE AND RECREATIONAL VEHICLE APPLICATIONS. EACH SEALED LEAD ACID BATTERY IS HAND CRAFTED IN THE USA. LIFELINE AGM MARINE BATTERY BENEFITS User Safety, Sealed construction, Non-spill. Maintenance free, No adding water or repairing corroded terminals Exceptionally Fast recharge, No current limitations with voltage regulated recharging

Terminals: GPL-24MT, GPL27MT & GPL-31MT are heavy-duty copper alloy Marine Terminals. The GPL-U1 is a 1/4″ -20 N.C. copper alloy threaded insert. All ‘T’ batteries supplied with brass bolts and washers. A= Automotive post. L= L bladed terminal 5/16″ bolt hole, supplied with bolts and washers. Handles: “T” models have handles built into the cover. GPL-24MT and GPL-27MT also incorporate strap handles. Handles not available on part numbers GPL-4CT. Models GPL-4DL & GPL-8DL are equipped with rope handles.

Deep Cycle, Thick positive plates to provide real deep cycle performance Outstanding cranking performance - Aircraft class cell construction lowers internal resistance

Life Cycle Performance Against a Leading Gel Cell Battery

Best charge retention (especially against flooded cell types) Lowest discharge rates - Less that 3 percent per month unattended Easily shipped - Even via UPS except GPL-8DL and GPL-4DL because of weight Shock and vibration resistant - 100% of plates are covered with separator liners Properly supported LIFELINE AGM batteries with absorbed electrolyte can be installed and operated on their side.

LIFELINE START BATTERIES Code

Volts

Dimensions (mm)

Weight

CCA

L

W

H

Kg

(0° C)

Capacity Amp Hours

GPL-1400T

12

249

132

174

14.5

550

57

GPL-2400T GPL-2700T

12 12

283 333

172 172

235 235

24.1 28.6

650 755

75 95

GPL-3100T

12

328

172

236

30.4

810

100

Capacity ratings are stated at 25°C (77°F) to 1.75 volts per cell.

Capacity ratings are stated at 25°C (77°F) to 1.75 volts per cell. Temperature range - Operating -40° to 70°

LIFELINE DEEP CYCLE BATTERIES Code

GPL-U1 GPL-24MT GPL-27MT GPL-31MT GPL-30HT GPL-4DL GPL-8DL GPL-4CT GPL-6CT GPL-L16T GPL-4CT-2V GPL-6CT-2V GPL-L16T-2V GPL-31T-2V

Volts

12 12 12 12 12 12 12 6 6 6 2 2 2 2

Dimensions (mm)

Weight

CCA

L

W

H

Kg

(0° C)

Capacity Amp Hours

196 283 333 328 279 527 526 261 261 279 261 261 296 328

132 172 172 172 166 222 278 181 177 175 179 179 177 171

175 235 235 236 304 266 260 294 321 395 252 329 399 236

10.9 25.5 29.5 31.4 43.5 61.2 73.6 30.0 40.9 54 30 40.8 54 31.4

215 550 575 600 700 1100 1350 750 980 1350 2025 2500 3645 3240

33 80 100 105 150 210 255 220 300 400 660 900 1200 660

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

125


ELECTRICAL

THE HEART OF YOUR SYSTEM

300

LIFELINE AGM batteries with absorbed electrolyte can be safely installed and operated on their side, or even up-side-down!.

amp hours

(6 Volts. Rated Cap. Amp. Hrs 20 Hr Rate)

• • • • • • • • • •

126

Sealed non-spill construction Maintenance free 100% fast recharge Deep Cycle Outstanding cranking performance Low internal resistance Best charge retention Lowest discharge rates Shock & vibration resistant Connect in series to make 12, 24 or 48 volt systems. Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


ELECTRICAL

AlTERNATORS

ALTERNATORS

NEW!

AT-SERIES ADVANCED TECHNOlOGY AlTERNATORS Welcome to the newest generation of high output alternator technology! Balmar AT-Series alternators bring together the latest innovations in alternator design to deliver incredible charging power in a compact, marine-friendly package. AT-Series alternators start out with a unique hairpin stator design which uses densely-wound square copper wire to generate exceptional amperage output in the smallest area possible. Hairpin stators feature 96 slots, compared to a 36-slot stators, allowing the hairpin wound stator to develop superior electromagnetic energy and produce electrical current more efficiently than other traditional alternator designs. New AT-Series alternators feature custom-designed, advanced powdercoat aluminum frames which are engineered to provide optimal airflow and unsurpassed cooling capacity. In addition, AT-Series alternators are equipped with a dozen 40-amp-capacity, externally mounted non-avalanche diodes, cool-running dual internal fans, and massive heat sinking designed to ensure ample cooling under high load demands. Scaled to fit in most original-position installations, 128mm 165 amp AT-Series alternators are available in 1” and 2” single foot mounting styles. Larger output, 200-amp alternators are housed in a 139mm diameter frame and feature a single 2” mounting foot. Mounting brackets are available to convert both 165 and 200 amp models for use with 3.15”ID (Hitachi) or 4” (J180) style mounts. AT-Series alternators are designed to be used with Max Charge MC-614 voltage regulators, and should only be used in dual vee belt or multi-groove serpentine belt applications. New Balmar serpentine pulley kits provide the ability to upgrade many engine models to support ATSeries alternators. See Page 13 for more information. Model #

Mounting Style

Output Amps/Volts

Frame Dia.

ShWt

AT-SF-165-12-IG

Sgl. Ft. 1” or 2”

165A, 12V

129mm

18.5 lb.

AT-SF-200-12-IG

Sgl. Ft. 2”

230A, 12V

139mm

22.5 lb.

Saddle Mount Brackets AT-165-3-MT

Converts 1” AT foot to 3.15”ID Saddle Mount

1.5 lb

AT-165-4-MT

Converts 1” AT foot to 4”ID Saddle Mount

1.5 lb

AT-200-3-MT

Converts 2” AT foot to 3.15”ID Saddle Mount

1.5 lb

AT-200-4-MT

Converts 2” AT foot to 4”ID Saddle Mount

1.5 lb

S-Stator (rear), Hairpin Stator (Front)

–6–

© 2013 Ballard Commercial Industries, Inc.

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

127


ELECTRICAL

SMAll CASE AlTERNATORS SMART READY® 6-SERIES

RECREATIONAl DUTY SMAll FRAME AlTERNATORS We may get in hot water with a certain fast food king – but there’s no question that Balmar’s 6-Series alternator is engineered to let you “have it your way”. Available in outputs ranging from 70 amps to 150 amps, in 12volt and 24-volt configurations, 6-Series alternators feature patented Smart Ready® internal voltage regulation that allows you to choose between stand alone internally regulated operation, or use with Balmar’s multi-stage Max Charge or ARS-5 voltage regulators to get the most out of your charging system.

60-Series

Balmar’s 6-Series alternators come in three mounting styles to fit just about any marine gas or diesel engine application; a 3.15”I.D. saddle style mount that’s perfect for most Yanmar engines and other applications using an Hitachi-type dual foot mount, a spindle style single foot mount that easily converts to replace 1” Motorola or 2” Delco-style mounts, and a 4”I.D. saddle mount for J-180-style engine configurations. All Smart Ready 6-Series alternators come standard with dual internal cooling fans, fixed voltage internal regulation, dedicated isolated ground, lamp circuit, and multi-position tensioning crown. Durable white powdercoat finish keeps your alternator looking ship-shape. Meets USCG Title 33, J1171, 8838, CE ignition protection standards. One-year limited warranty. • • • •

Patented Smart Ready® regulator Isolated ground termination For gas or diesel engines Safe to 15,000 RPM

• • • •

621-Series (No Spacer)

Meets multiple ignition standards Constructed in Arlington, WA Four popular mounts 12V or 24V models

6-SERIES AlTERNATORS ARE AvAIlAblE AS PART Of A ChARgINg SYSTEM PACkAgE. SEE PAgE 12 fOR DETAIlS. Model #

Mounting Style

Output Amps/Volts

Includes Regulator

Min. Pulley

ShWt

621-70-SR-IG

Sgl. Ft. 1” or 2”

70A, 12V

Yes

3/8”

14 lb.

621-100-SR-IG

Sgl. Ft. 1” or 2”

100A, 12V

Yes

1/2”

14 lb.

621-120-SR-IG

Sgl. Ft. 1” or 2”

120A, 12V

Yes

1/2” (2)

14 lb.

621-150-SR-IG

Sgl. Ft. 1” or 2”

150A, 12V

Yes

1/2” (2)

14 lb.

621-24-70-SR-IG

Sgl. Ft. 1” or 2”

70A, 24V

Yes

1/2” (2)

14 lb.

60-70-SR-IG

3.15” Saddle

70A, 12V

Yes

3/8”

14 lb.

60-100-SR-IG

3.15” Saddle

100A, 12V

Yes

1/2”

14 lb.

60-120-SR-IG

3.15” Saddle

120A, 12V

Yes

1/2” (2)

14 lb.

60-150-SR-IG

3.15” Saddle

150A, 12V

Yes

1/2” (2)

14 lb.

60-24-70-SR-IG

3.15” Saddle

70A, 24V

Yes

1/2” (2)

14 lb.

604-120-SR-IG

3.15” Saddle

120A, 12V

Yes

1/2” (2)

14 lb.

604-150-SR-IG

3.15” Saddle

150A, 12V

Yes

1/2” (2)

14 lb.

604-24-70-SR-IG

3.15” Saddle

70A, 24V

Yes

1/2” (2)

14 lb.

621-Series (With Spacer)

604-Series

Visit us online at WWW.BALMAR.NET

128

–7–

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


ELECTRICAL

lARGE CASE AlTERNATORS 94-SERIES

MID-DUTY, lARGE FRAME AlTERNATORS From world-class ocean racers to commercial fishers and military patrol vessels, there aren’t many applications where the 94-Series alternator hasn’t been. This large-frame alternator has a proven record for supporting large house battery banks and challenging electrical loads under some of the toughest marine conditions imaginable. These Delco-style, 2-inch single foot alternators feature extra-large gauge custom wound stators and high amperage diode packs to ensure optimal charging performance. Built to meet USCG Title 33 ignition protection standards, 94-Series alternators deliver excellent low rpm output and terrific response throughout the powerband. Twelve-volt units are available in 165 and 210 amp rated outputs. A 12-volt, 140-amp unit is also available. One-year limited warranty.

94-Series Model #

Mounting Style

Output Amps/Volts

Min. Pulley

ShWt

94-12-165-IG

Sgl. Ft. 2”

165A, 12V

1/2” Dual

19 lb.

94-12-210-IG

Sgl. Ft. 2”

210A, 12V

1/2” Dual

19 lb.

94-24-140-IG

Sgl. Ft. 2”

140A, 24V

1/2” Dual

19 lb.

• • • • •

Isolated ground termination Extra heavy-duty windings, diodes & brushes Corrosion-resistant powdercoat finish Bi-directional cooling fan Assembled at Balmar in Arlington, WA

94lY-SERIES

HITACHI®-MOUNT, lARGE FRAME AlTERNATORS Designed to provide a sizeable charging upgrade on Yanmar’s 440-horsepower 6LY-3 engines, the 94-LY series alternator combines the rugged dependability of the 94-Series alternator with the popular Hitachi style 3.15” saddle mount – delivering as much as 210 amps of potential charging amperage for lobster boats, sportfishers and other vessels using the 6LY-3 and other similar diesels. Built to meet USCG Title 33 ignition protection standards, 94LY-Series alternators are well equipped to meet large battery loads and onboard electrical demands. Twelve-volt units are available in 165 and 210 amp rated outputs. A 12-volt, 140-amp unit is also available. Uni-directional fan. Isolated ground. Dual vee pulley standard. Includes one-year limited manufacturer’s warranty. Model #

Mounting Style

Output Amps/Volts

Min. Pulley

• • • • •

ShWt

94LY-12-165-IG

Sgl. Ft. 2”

165A, 12V

1/2” Dual

19 lb.

94LY-12-210-IG

Sgl. Ft. 2”

210A, 12V

1/2” Dual

19 lb.

94LY-24-140-IG

Sgl. Ft. 2”

140A, 24V

1/2” Dual

19 lb.

94LY-Series Isolated ground termination Extra heavy-duty windings, diodes & brushes Corrosion-resistant powdercoat finish Bi-directional cooling fan Constructed at Balmar in Arlington, WA

OffShORE REPAIR kITS ARE AvAIlAblE fOR MOST bAlMAR AlTERNATORS. SEE www.bAlMAR.NET OR CAll fOR DETAIlS. –8–

© 2013 Ballard Commercial Industries, Inc.

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

129


ELECTRICAL

lARGE CASE AlTERNATORS 95-SERIES

MID-DUTY, lARGE FRAME AlTERNATORS With a pedigree that’s based in highly demanding military service, the 95-Series alternator stands out as a powerfully capable source of charging in the marine environment. Despite its generous output curves, the 95-Series alternator is surprisingly compact – allowing it to be used in applications where similarly rated alternators would be impossible to install. The 95-Series alternator features an isolated ground for sure continuity to system negative. A four-inch J-180 saddle is compatible with a wide number of original position engine mounts, and can be easily designed to work as a secondposition mount. Outputs range from 165 amps to 210 amps at 12 volts, and 140 amps at 24 volts. Isolated ground termination. Meets USCG Title 33 standards. One-year limited warranty. Model #

Mounting Style

Output Amps/Volts

Min. Pulley

Ship Weight

9504-12-165-IG

Sgl. Ft. 2”

165A, 12V

1/2” Dual

20 lb.

9504-12-210-IG

Sgl. Ft. 2”

210A, 12V

1/2” Dual

20 lb.

9504-24-140-IG

Sgl. Ft. 2”

140A, 24V

1/2” Dual

20 lb.

• • • • •

Constructed at Balmar in Arlington, WA Extra heavy-duty windings, diodes & brushes Corrosion-resistant powdercoat finish Bi-directional cooling fan Precision cast aluminum frame

INSTAllATION HARDWARE KITS

MOUNTING SPACERS

CIRCUIT BREAKERS

Pre-matched hardware kits for various Yanmar engines can save a ton of time and frustration. 6CX and 6LP kits include required pulleys.

Aftermarket installations may require spacing to correct alignment issues. Steel 1/4”, 1/2” and 1” spacers are available.

Meeting SAE J1171 safety standards, 125A and 150A breakers are designed for surface mount, and are resetable. 3000A interrupt. Phenolic.

Model #

For Engine Model

Sh/Wt Model #

Width/Bore

6-0020

GM, JH

1.5 lb.

10-4047

1” / 3/8”

1 lb.

Model #

Amps

Sh/Wt

6-0030

6CX

4 lb.

10-4000

1/2” / 3/8”

.5 lb.

1512

125

1 lb.

6-0040

6LP

4 lb.

10-4048

1/4” / 3/8”

.5 lb.

1515

150

1 lb.

ShWt

VISIT US ON THE INTERNET AT WWW.BAlMAR.NET

UlR™ UNIVERSAl lAMP RElAY Uses stator output to provide a signal to support your panel’s lamp drive. Use to complete other circuits to 30A whenever the alternator is in operation. Includes relay and wiring harness. ShWt. 1lb.

Visit us online at WWW.BALMAR.NET

130

–9–

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


ELECTRICAL

ExTRA lARGE-CASE AlTERNATORS 97-SERIES

HEAVY DUTY, ExTRA-lARGE FRAME AlTERNATORS Built expressly for the added demands of large, multi-battery banks, inverter loads and other substantial electrical demands, extra-large case 97-Series brushless alternators provide the size, cooling and impressive output across the range of engine RPM required to perform in league with a small genset. Brushless 97-Series alternators deliver unexcelled electrical efficiency and a level of safety that meets U.S. Coast Guard Title 33, CE, ISO J1171 and SAE 8846 standards for ignition protection. Isolated ground termination. Corrosion-resistant powdercoat. Bi-directional cooling fan. Maximum alternator RPM: 7,000. Model #

Mounting Style

Output Amps/Volts

Min. Pulley

ShWt

97-12-165-IG

J-180 Saddle

160A, 12V

1/2” Dual

36 lb

97-24-140-IG

J-180 Saddle

140A, 24V

1/2” Dual

36 lb

97EhD-SERIES

• • • • •

Highly-efficient brushless design Designed for extended-duty operation Corrosion-resistant powdercoat finish Bi-directional cooling fan Made in the USA

HEAVY DUTY, ExTRA-lARGE FRAME AlTERNATORS Perfect as a dedicated alternator for extensive house battery loads, or as a primary alternator on large J-180 mount applications like Caterpillar, Cummins, MTU and John Deere diesel engines, extra heavy duty 97EHD alternators provide exceptional output across the board with ratings in excess of 250 amps at 12 volts and nearly 200 amps at 24 volts. Housed in non-powdercoated 6.5” diameter frames, 97EHD alternators are an excellent solution for sustained high output charging conditions. Alternators are case ground, and feature bidirectional cooling fansa. Positive and negative rectifier assemblies feature high amperage diodes. Dual vee belt is standard. All models require external regulation. Model #

Mounting Style

Output Amps/Volts

Min. Pulley

ShWt

97EHD-185-12

J-180 Saddle

185A, 12V

1/2” Dual

42 lb

97EHD-265-12

J-180 Saddle

264A, 12V

1/2” Dual

42 lb

97EHD-190-24

J-180 Saddle

190A, 24V

1/2” Dual

42 lb

– 10 –

• • • • •

For extra heavy duty electrical demands Designed for extended-duty operation Natural cast aluminum case Bi-directional cooling fan Made in the USA

© 2013 Ballard Commercial Industries, Inc.

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

131


ELECTRICAL

ExTRA lARGE-CASE AlTERNATORS 98-SERIES

MAxIMUM DUTY, ExTRA-lARGE FRAME AlTERNATORS With the ability to deliver performance in a league with auxiliary gensets, the 98-Series alternator offers the capacity to produce nearly 5kW of DC output to make short work of big battery charging. Available in 310A/12V and 220A/24V models, the 98-Series alternator combines a robust brushless design with dual inside/outside cooling fans to produce awesome power with maximum efficiency. High amperage diodes, over-sized bearings, and a dedicated isolated ground add to this powerful alternator’s impressive output and dependability. Requires external voltage regulation. Meets USCG Title 33, CE, SAE 8846 and ISO J1171 ignition protection standards. Model #

Mounting Style

Output Amps/Volts

Min. Pulley

• • • • •

ShWt

98-12-310-IG-BL

J-180 Saddle

310A, 12V

1/2” Dual

42 lb

98-24-220-IG-BL

J-180 Saddle

220A, 24V

1/2” Dual

42 lb

For Extra Heavy Duty Electrical Demands Designed For Extended-Duty Operation Powdercoated Cast Aluminum Case Bi-Directional Cooling Fans Built in North America

AlTERNATOR MOUNTING BRACKET Many installers rely on the Model 5276 Alternator Bracket and the UAA Universal Adjustment Arm as convenient, readily available solutions for second alternator installations. Formed from powdercoated cast aluminum, the Model 5276 includes a UAA and supports J-180 saddle or 2” single-foot mounts. Bracket requires flat, engine-mounted platform for installation. UAA available separately. Model #

ShWt

5276

8 lb

UAA

1 lb

12-98-AIR

2.5 lb

fOR 98-SERIES

AIR INDUCTION BACK Mounted on the back of the 98-Series alternator, the air induction back allows enhanced cooling when fresh air is provided via a remote blower. Includes mounting hardware. Model # 12-98-AIR

Visit us online at WWW.BALMAR.NET

132

– 11 –

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


ELECTRICAL

CHARGING SYSTEM PACKAGES Charging system packages make it easier than ever to ensure that your alternator and regulator will match your engine with the least amount of installation headaches. note that any alternator/regulator packages featuring alternator output ratings in excess of 100 amps will require either dual vee drive pulleys or multi-groove pulleys to ensure optimal output and limited belt wear. see Page 13 for information about new AltMount® Serpentine Pulley kits.

AT-SERIES AlTERNATOR/REGUlATOR PACKAGES

6-SERIES AlTERNATOR/REGUlATOR PACKAGES

New AT-Series alternators, combined with the proven charge control of the MC-614 voltage regulator, provide the ideal charging solution for bigger house batteries and newer high-acceptance battery technologies. Packages include 165-amp or 200-amp AT-Series alternator, Max Charge MC-614 voltage regulator, alternator temperature sensor, battery temperature sensor. VUP package can be used in 2” single foot applications. YP package includes a conversion bracket for use in 3.15”ID saddle-style mounts. AT Packages must be installed in dual belt, or serpentine belt systems.

Balmar’s 6-Series alternators and multi-stage voltage regulators deliver faster, safer charging for batteries ranging from standard flooded to AGM technologies. Choose ARS-5 or Max Charge regulators to meet your preferred level of performance. YP models fit engines using a 3.15” I.D. saddle mount. VUP models fit most engines using 1” or 2” single foot mounts. Kits include alternator, voltage regulator, battery and alternator temperature sensors and wiring harness. YP kits include mounting hardware.

Includes ARS-5 Regulator 60-YP-70-SR-KIT 60-YP-100-SR-KIT 60-YP-120-SR-KIT 60-YP-150-SR-KIT N/A 621-VUP-70-SR-KIT 621-VUP-100-SR-KIT 621-VUP-120-SR-KIT 621-VUP-150-SR-KIT N/A

Includes MC-614 Regulator 60-YP-MC-70-SR-KIT 60-YP-MC-100-SR-KIT 60-YP-MC-120-SR-KIT 60-YP-MC-150-SR-KIT N/A 621-VUP-MC-70-SR-KIT 621-VUP-MC-100-SR-KIT 621-VUP-MC-120-SR-KIT 621-VUP-MC-150-SR-KIT N/A

Includes MC-624 Regulator N/A N/A N/A N/A 60-YP-24-70-SR-KIT N/A N/A N/A N/A 621-VUP-24-70-SR-KIT

Mounting Style 3.15” Saddle 3.15” Saddle 3.15” Saddle 3.15” Saddle 3.15” Saddle 1” OR 2” Spindle 1” OR 2” Spindle 1” OR 2” Spindle 1” OR 2” Spindle 1” OR 2” Spindle

Output Amps/Volts 70A, 12V 100A, 12V 120A, 12V 150A, 12V 70A, 24V 70A, 12V 100A, 12V 120A, 12V 150A, 12V 70A, 24V

Min. Belt Width Single 3/8” Single 1/2” Dual 1/2” Dual 1/2” Dual 1/2” Single 3/8” Single 1/2” Dual 1/2” Dual 1/2” Dual 1/2”

Ship Weight 19 lb. 19 lb. 19 lb. 19 lb. 19 lb. 19 lb. 19 lb. 19 lb. 19 lb. 19 lb.

N/A N/A N/A N/A

AT-YP-MC-165-KIT AT-YP-MC-200-KIT AT-VUP-MC-165-KIT AT-VUP-MC-200-KIT

N/A N/A N/A N/A

3.15” Saddle 3.15” Saddle 2” Spindle 2” Spindle

165A, 12V 200A, 12V 165A, 12V 200A, 12V

Dual 1/2” Dual 1/2” Dual 1/2” Dual 1/2”

25 lb 29 lb 25 lb 29 lb

– 12 –

© 2013 Ballard Commercial Industries, Inc.

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

133


ELECTRICAL

SERPENTINE PUllEY KITS

NEW!

Balmar is proud to announce the addition of AltMountTM to the Ballard Commercial Industries family of companies. Since its introduction in 2008, AltMount has been a leading designer and manufacturer of aftermarket serpentine pulley kits for marine diesel engines. Our acquisition of AltMount allows us to expand the range of available pulleys based on AltMount’s proven, patented designs. In addition to pulley kits, which allow the user to increase the output capacity of the original position alternator, the AltMount second alternator kits provide the ability to add a high-output second alternator for increased charging output. These kits are an ideal upgrade for serious cruisers and others that depend on the propulsion engine for substantial battery charging needs. YANMAR SERPENTINE PUllEY KITS

PERKINS SERPENTINE PUllEY KITS

Model

Engine Model(s)

Ship Weight

Model

Engine Model(s)

48-YSP-6LY-A

6LY, 6LYA-STP, 6LY2-STP

48-PSP-410-A

4107

48-YSP-6LP-A

6LPA-STP2, STZP2, STZP3

48-PSP-410-B

4108

48-YSP-4JH-A

4JH5

48-PSP-PR-A

PRIMA

48-YSP-4JH-B

4JH4HTE, TE, DTE

VOlVO SERPENTINE PUllEY KITS

48-YSP-4JH-C

4JH4-E

48-VSP-TD-A

TDM-22

48-YSP-4JH-D

4JH3, TE, HTE

48-VSP-D2-A

D2-55A,B,C,D,E,F

48-YSP-4JH-E

4JH2, TE, HTE, DTE, UTE

48-VSP-PR-A

PRIMA

48-YSP-4JH-F

4JHE, TE, HTE, DTE

48-VSP-MD-A

MD2030

48-YSP-4LH-A

4LH-A

48-VSP-MD-B

MD2040

48-YSP-3JH-A

3JH5

48-YSP-3JH-B

3JH4-E

48-WSP-30-B

30-B

48-YSP-3JH-C

3JH2-TE

48-WSP-W40

W40

3JH2-E

48-WSP-42B

42B

48-YSP-3JH-D

WESTERBEKE SERPENTINE PUllEY KITS

48-YSP-3GM-A

3GM30

48-WSP-W46

W46

48-YSP-3GM-B

3GM30-F

48-WSP-W44-A

W44A

48-YSP-3HM-A

3HM35

48-WSP-W44-B

W44B

48-YSP-3HM-B

3HM35-F

48-WSP-W71

W71

48-YSP-3YM-A

3YM20

48-WSP-W82

W82

48-YSP-3YM-B

3YM30

48-YSP-2YM-A

2YM15

UNIVERSAl SERPENTINE PUllEY KITS

Ship Weight

SECOND AlTERNATOR BRACKET KITS

48-YDA-4JH-A

YANMAR 4JH3

48-YDA-4JH-B

YANMAR 4JH4-HTE, TE YANMAR 4JH4-E YANMAR 6LY, 6LY-2

48-USP-M-A

M-25XP

48-YDA-4JH-C

48-USP-M-B

M-35

48-YDA-6LY-A

New pulley, tensioner and bracket kits are currently under development. Visit us at www.balmar.net, or contact us for updated information if your engine is not currently supported in these listings.

Visit us online at WWW.BALMAR.NET

134

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

– 13 –


ELECTRICAL VOlTAGE REGUlATORS “Imagine your charging system as part of a body... ... If your alternator was the heart, the voltage regulator would certainly be the brain.”

High-output alternators are an important part of your system for battery care – but they’re definitely not the only part. Without proper voltage regulation, battery charging could be a slow, ineffectual process, or even worse, an ideal recipe for early battery failure. Smart, multi-stage Balmar voltage regulation provides a dynamic method for monitoring battery condition, and applying the correct level of alternator control to ensure that your batteries are charged quickly and safely. Using advanced, microprocessor-controlled technology, Balmar multi-stage voltage regulators are engineered to precisely control alternator output to provide the optimal charging voltage based on battery type to bring batteries to a full charge. The process is simple, yet exceedingly effective. During engine operation, the Balmar voltage regulator goes through the following stages to ensure proper battery charging: Step 1:

Start Delay - After engine start up, the regulator waits for several seconds before applying field current to the alternator. This allows the engine and belts an opportunity to warm up before alternator load is applied.

Step 2:

Soft Ramp - The regulator slowly increases field excitation of the alternator to reduce belt stress.

Step 3:

Bulk Charging - The regulator increases field output to the maximum safe level, allowing alternator to reach maximum amperage output based on the target limits of the battery type being charged. Target voltage ranges from 14.1 to 14.6 depending on battery program selected (24-volt bulk charging voltages range from 28.2 to 29.2 volts). Bulk time is factory set at 18 minutes, and is fully adjustable in advanced programming mode.

Step 4:

Calculated Bulk - At the end of the set bulk time period, the regulator calculates the state of charging based on the alternator’s ability to reach and maintain target voltage, and the percentage of field output required to maintain that voltage. This stage will maintain bulk charging until all criteria are met, at which point, the regulator will ramp down to absorption voltage.

Step 5:

Absorption Voltage - Typically two tenths of a volt below bulk target voltage, absorption voltage allows the alternator to drive current into the almost fully charged batteries without overcharging. Absorption time is preset at 18 minutes, and is adjustable in the regulator’s advanced programming mode.

STEP 3

STEP 4 STEP 5

STEP 2

STEP 6

STEP 8

STEP 7 STEP 1

–– 14## – –

© 2013 Ballard Commercial Industries, © 2013 Ballard Commercial Industries,Inc. Inc.

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

135


ELECTRICAL

VOlTAGE REGUlATORS Step 6:

Calculated Absorption - At the end of the set absorption time period, the regulator calculates the state of charging based on the alternator’s ability to reach and maintain target voltage, and the percentage of field output required to maintain that voltage. This stage will maintain absorption charging voltage until all criteria are met, at which point, the regulator will ramp down to float voltage.

Step 7:

Float Voltage - Typically a volt below bulk target voltage, float voltage allows the alternator to drive current into fully charged batteries sufficient to replace any battery capacity used while under way. Float time is preset at 18 minutes, and is adjustable in the regulator’s advanced programming mode.

Step 8:

Calculated Float - At the end of the set float time period, the regulator calculates the state of charging based on the alternator’s ability maintain target float voltage and the percentage of field output required to maintain that voltage. If all of the calculation criteria are met, the regulator will continue to maintain float voltage. If the calculation indicates that the alternator is failing to maintain battery voltage, the regulator will return to absorption voltage as indicated by steps 9, 10 and 11.

MUlTI-STAGE REGUlATOR FEATURES USER-SElECTABlE PRESET BATTERY PROGRAMS Every battery is different, so Balmar provides multiple charge profiles to ensure optimal charging. Simply select the battery program that matches your battery technology. Preset programs include profiles for standard and deep cycle flooded, gel, AGM, and spiral wound AGM (Optima) batteries. Max Charge regulators also provide a program for voltage sensitive halogen lighting systems.

ADVANCED PROGRAMMING MODES Battery needs can change, as can their manufacturer’s charging recommendations.That’s why Balmar multi-stage voltage regulators feature a broad range of advanced regulator adjustments. By accessing the advanced programming function, the user can increase or decrease charging times and voltages in all stages of charge, increase or decrease start delay and termperature compensation limits, adjust temperature compensation slopes, and modify setpoints for alternator over-temperature response. It all adds up to the most user control possible.

BElT lOAD MANAGEMENT Accidents do happen – and occasionally, a boater will install an alternator on an engine that’s just too high an output for the system’s drive belt. Balmar multi-stage regulators can protect the engine and belt by enabling the user to de-rate the alternator’s output in small increments by adjusting the Belt Load Manager. Adjustable in roughly four percent steps, the Belt Load Manager widens the regulator’s field pulse bandwidth, reducing load on the drive belt. The Belt Load Manager can also be used to protect the alternator in applications where battery capacity exceeds ideal charging ratios.

AlTERNATOR AND BATTERY TEMPERATURE SENSING As battery technologies change, and battery capacities grow, the ability to monitor and respond to changes in alternator and battery temperature becomes more essential. With optional alternator and batery temperature sensors installed, Balmar multi-stage voltage regulators have the ability to automatically correct charging output to ensure that batteries are properly charged regardless of ambient temperature. If battery temperatures exceed safe operating levels, ARS-5 and Max Charge regulators will automatically discontinue charging to avoid dangerous thermal runaway conditions. Like batteries, alternators have optimal operating temperatures, and by sensing temperature at the alternator, Balmar regulators can make automatic adjustments to field output to ensure that the alternator maintains a safe working temperature. And all of this happens without any need for operator intervention.

Optional Temperature Sensors

– 15 –

Visit us online at WWW.BALMAR.NET

136

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


ELECTRICAL

MUlTI-STAGE VOlTAGE REGUlATORS MAx CHARGE MC-614 VOlTAGE REGUlATOR Balmar’s premium MC-614 multi-stage voltage regulator delivers an impressive list of features, and dependable, robust performance that’s unrivaled in the industry. The MC-614 regulator is engineered to provide up to 15 amps of continuous field current, making it the perfect choice for twin engine applications where large battery banks highlight the need for both alternators to work together to maximize charging output. When used in conjunction with Balmar’s Centerfielder II charge balancer, the MC-614 can easily control two alternators on two engines at one time.

MAx CHARGE MC-624 REGUlATOR The 24-volt MC-624 provides all of the functionality of the MC-614 in a regulator that’s engineered for 24-volt charging systems. Like the MC-614, the MC-624 regulator features a new, faster processor and updated circuitry to ensure optimal performance and dependability. The MC-624 regulator is recommended in twinengine, 24-volt systems using the Centerfielder II. As with all Balmar multi-stage voltage regulators, the MC-624 is designed for use with P-type alternators. •

• • •

Selectable preset programs for Gel, AGM, Deep-Cycle Flooded, Standard Flooded, Spiral Wound (Optima) Batteries Special program for systems with voltage sensitive halogen lighting Universal default program that’s safe for most marine battery technologies 15A maximum field current output able to drive two alternators at once (recommended for twin engine applications with Centerfielder II – See Page 18)

Alternator and battery temperature sensing with optional sensor cables (see Page XX) provides added charging efficiency and system safety. A bright LED alphamumeric display and easy to navigate programming mode make the Max Charge regulator as simple as it is intelligent. Scrolling program modes are controlled by an easy-touse reed switch and magnetic programming tool. Exclusive Belt Load Manager function allows user to adjust maximum regulator field output

• •

MUlTI-STAGE REGUlATOR SPECIFICATIONS Model

Volts

Bat. Temp. Sense

Wiring Harness

Bat. EQ.

Preset Bat. Progs.

Dual Alts.

Belt Wear Control

Adv. Prog. Mode

Dimensions

Ship Weight

MC-614

12

YES (2)

YES

NO

YES

7

YES

YES

YES

4.8"x3.2"x1.5"

1lb

MC-614-H

12

YES (2)

YES

YES

YES

7

YES

YES

YES

4.8"x3.2"x1.5"

1.5 lb

MC-624

24

YES (2)

YES

NO

YES

7

YES

YES

YES

4.8"x3.2"x1.5"

1lb

MC-624-H

24

YES (2)

YES

YES

YES

7

YES

YES

YES

4.8"x3.2"x1.5"

1.5 lb

lIKE US ON

– 16 –

Alt. Temp. Sense

FOR THE lATEST PRODUCT AND COMPANY INFO!

© 2013 Ballard Commercial Industries, Inc.

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

137


ELECTRICAL

MUlTI-STAGE VOlTAGE REGUlATORS MAx CHARGE MC-612-DUAl REGUlATOR As more boaters opt to install a second alternator on their propulsion engine, Balmar introduces the MC-612-DUAL, the first regulator that’s made specifically to control two alternators on a single engine. The MC-612-DUAL-H features twin 54” wiring harnesses and the ability to sense temperature at two alternators (regulator is programmable to toggle between dual battery or dual alternator temperature sensing). Like other Max Charge models, the MC-612-DUAL features seven selectable battery programs, along with a wealth of advanced programmability, so it’s tailor-made for just about any boating application.

ARS-5 ADVANCED REGUlATOR The ideal choice for the budget-minded boater, the ARS-5 regulator is designed for use with a single 12-volt alternator, yet it provides five selectable battery programs, a belt load manager, and a range of advanced programming functions. Like all the Max Charge regulators, the ARS5 regulator features an easy-to-read, 3-digit display, and convenient magnetic reed switch for programming adjustments. Temperature sensing circuits for two batteries and alternator. For use with a single P-type 12-volt alternator. 1 year limited warranty. • • • •

Selectable preset programs for Gel, AGM, Deep-Cycle Flooded, Spiral Wound (Optima) Batteries Universal default program that’s safe for most marine battery technologies 9A maximum field current output. For use in single alternator applications only. Alternator and battery temperature sensing with optional sensor cables (see Page 18) provides added charging efficiency and greater system safety. A bright LED alphamumeric display and easy to navigate programming mode increase user friendliness

• •

Scrolling program modes are controlled by an easy-to-use reed switch and magnetic programming tool, included with the regulator. Belt Load Manager allows user to reduce maximum regulator field output in five percent increments to ensure that belts are protected from undue wear. ARS-5-H includes a 54” long wiring harness for greater ease of installation. Short or long display modes allow the user the ability to see the minimum or maximum operational data while the regulator is active.

MUlTI-STAGE REGUlATOR FEATURES & SPECIFICATIONS

MC-612-DUAL

12

Bat. Temp. Sense YES (2)

YES (2)

NO

YES

Preset Bat. Progs. 7

YES

YES

Adv. Prog. Mode YES

4.8"x3.2"x1.5"

1 lb

MC-612-DUAL-H

12

YES (2)

YES (2)

YES (2)

YES

7

YES

YES

YES

4.8"x3.2"x1.5"

2 lb

ARS-5

12

YES (1)

YES

NO

NO

5

NO

YES

YES

4.1”x3.2”x1.5”

1 lb

ARS-5-H

12

YES (1)

YES

YES

NO

5

NO

YES

YES

4.1”x3.2”x1.5”

1.5 lb

Model

Volts

Alt. Temp. Sense

Wiring Harness

Bat. EQ.

Dual Alts.

Belt Wear Control

Dimensions

Sh Wt

NOTES: Optional MC-TS-A and MC-TS-B temperature sensors are required to enable advanced regulator temperature sensing functions. DO NOT attempt to use the ARS-5 to control dual alternators. Balmar voltage regulators are designed for use with P-type alternators only. Install regulators in well ventilated location with ambient temperature <110˚F. See www.balmar.net for additional information on voltage regulators.

– 17 –

Visit us online at WWW.BALMAR.NET

138

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


ELECTRICAL

CENTERFIElDER II CENTERFIElDER II The Centerfielder balances twin engine charging systems by monitoring port and starboard voltage regulators. When both alternators and voltage regulators are working, the Centerfielder II automatically splits field output from the dominant regulator to both alternators, making it possible to charge a single house battery bank with the combined output of both alternators.The Centerfielder II works in both 12-volt and 24-volt applications, and includes detailed wiring instructions along with larger gauge wire replacements for port and starboard regulator power wires. Use only with Max Charge MC-612, MC-614, or MC-624 voltage regulators. Do not install in systems utilizing internally regulated alternators. 1 year limited warranty. • • •

Balances charging in twin engine applications Isolates alternators and regulators when only one engine is running Provides field current from a single regulator to both port and starboard alternators when both engines are in operation

Eliminates alternator “chatter” by unifying power output to a single battery bank For use with Max Charge regulators only Includes upgraded regulator power wires and fusing for port and starboard voltage regulator wiring harnesses

• •

Model

Volts

Use With

Fusing

Wiring Included

ShWt

CFII-12/24

12/24

MC-612, MC-614, MC-624

15A ATC

Fused 12 Ga. Power Wires (2)

1.5 lb

TYPICAl CENTERFIElDER II SYSTEM WIRING DIAGRAM Useful in applications like multihulls and powerboats with twin propulsion motors, the Centerfielder II acts like a referee, ensuring that both port and starboard charging systems work together, rather than compete, to keep a large house battery efficiently charged. The Centerfielder II is B designed to work specifically with MC-614 and MC-624 voltage regulators.

G

S I

F F I

S

– 18 –

GROUND (G) POWER (P) FIELD (F) IGNITION (I) SENSE (S) LAMP (L) BATTERY+ (B)

B

P

P G L

G

F G L F

I

1. 2. 3. 4. 5. 6. 7.

I

L

L

G

G

F

F

© 2013 Ballard Commercial Industries, Inc.

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

139


ELECTRICAL

DIGITAl DUO CHARGE DIGITAl DUO CHARGE - DDC-12/24 The DDC-12/24 offers the smartest system yet for current and voltage controlled charging between the house and starting batteries -eliminating the need for an isolator or battery switches. During charging, the Duo Charge monitors voltage at the house battery. When voltage exceeds the set minimum (typically 13V in a 12-volt system and 26V in a 24-volt system), the Duo Charge automatically engages, providing up to 30 amps to the starting battery. When no charge source is present, the Duo Charge separates the batteries, so the starting battery won’t be accidentally discharged. Optional solenoid control enables higher charging output when required (solenoid is not included). Includes input/output wiring. Preset programs for gel, AGM, standard flooded and deep cycle flooded batteries allow mixing of house and start battery technologies. *Battery temperature sensing requires optional MCTS-B sensor cable. 1 year limited warranty. Model

Amps

Volts

Program Presets

Bat. Temp.

Dimensions

ShWt lb/kg

DDC-12/24

30

12/24

Four (Gel, AGM, Std. Fld., FDC)

YES*

4.8”x3.2”x1.5”

1.5/.69

G

B G

B

S

B

G

G 1. GROUND (G) 2. BATTERY + (B) 3. VOLTAGE SENSE (S)

G

– 19 –

Visit us online at WWW.BALMAR.NET

140

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


ELECTRICAL

AlTERNATOR POWER CURVES Alternator output is dependent on a number of factors; battery condition and capacity, wire size, engine horsepower and engine rpm, battery temperature, and alternator temperature. Of those factors, alternator rotation speed and alternator temperature are the most important. The following chart breaks down alternator output based on two temperature levels; cold (with an ambient temperature of 125ºF at the rectifier assembly, and hot (with an ambient temperature of 200ºF at the rectifier assembly). Note that output values are based on alternator RPM, not engine RPM.

AlTERNATOR POWER CURVES BY MODEl ALTERNATOR RPM

1000

1500

2000

2500

3000

3500

4000

4500

5000

5500

6000

COLD

0

20

68

70

69

71

72

73

73

72

72

HOT

0

20

66

65

63

64

63

62

63

63

63

6-SERIES 12-VOLT 100-AMP MODELS

COLD

0

16

80

87

92

98

104

106

108

109

108

HOT

0

13

68

74

75

79

82

86

85

85

85

6-SERIES 12-VOLT 120-AMP MODELS

COLD

0

21

80

101

115

117

120

121

122

122

122

HOT

0

20

76

88

92

92

93

93

92

94

93

6-SERIES 12-VOLT 150-AMP MODELS

COLD

0

0

55

102

122

126

138

145

151

155

155

HOT

0

0

50

91

106

108

114

121

122

120

120

6-SERIES 24-VOLT 70-AMP MODELS

COLD

0

0

30

52

67

72

78

81

83

82

83

HOT

0

0

30

48

51

55

60

62

65

67

68

AT-SERIES 165-AMP MODEL

COLD

0

60

119

140

145

156

164

167

169

170

172

HOT

0

59

103

120

130

140

142

149

150

151

153

AT-SERIES 200-AMP MODEL

COLD

0

132

158

198

190

222

228

230

232

235

238

HOT

0

73

147

168

173

174

179

182

188

193

194

94/94LY-SERIES 12-VOLT, 165-AMP MODEL

COLD

0

18

74

101

119

124

141

146

153

166

169

HOT

0

8

69

88

103

115

133

142

140

143

144

94/94LY-SERIES 12-VOLT, 210-AMP MODEL

COLD

0

19

45

91

125

144

163

169

184

202

214

HOT

0

20

45

86

120

133

138

142

159

177

179

94/94LY-SERIES 24-VOLT, 140-AMP MODEL

COLD

0

3

22

68

80

91

100

108

127

135

142

HOT

0

0

5

15

36

55

79

90

112

117

119

95-SERIES 12-VOLT, 165-AMP MODEL

COLD

0

18

76

103

122

130

145

149

153

166

169

HOT

0

9

67

87

103

118

135

139

139

141

140

95-SERIES 12-VOLT, 210-AMP MODEL

COLD

0

15

43

101

128

147

169

178

183

205

211

HOT

0

13

40

79

121

134

135

142

155

173

180

95-SERIES 24-VOLT, 140-AMP MODEL

COLD

0

11

16

45

79

88

100

102

129

140

145

HOT

0

5

12

30

33

41

45

49

52

54

55

97-SERIES 12-VOLT, 160-AMP MODEL

COLD

0

38

119

140

155

157

163

165

166

167

167

HOT

0

36

115

133

143

144

145

144

143

145

148

97-SERIES 24-VOLT, 140-AMP MODEL

COLD

0

31

60

89

98

104

122

128

135

139

144

HOT

0

25

45

76

84

96

110

117

123

124

130

97EHD-SERIES 12-VOLT, 185-AMP MODEL

COLD

0

100

141

159

165

174

179

183

186

186

184

HOT

0

83

132

144

150

163

166

170

172

170

171

97EHD-SERIES 12-VOLT, 265-AMP MODEL

COLD

0

50

148

211

226

245

252

255

260

268

270

HOT

0

52

128

179

201

211

214

217

220

217

216

97EHD-SERIES 24-VOLT, 190-AMP MODEL

COLD

0

51

144

165

178

189

193

198

196

195

193

HOT

0

50

140

145

151

155

160

160

162

165

164

98-SERIES 12-VOLT, 310-AMP MODEL

COLD

0

36

148

230

259

278

288

295

315

322

320

HOT

0

30

126

200

221

228

240

254

250

251

252

98-SERIES 24-VOLT, 220-AMP MODEL

COLD

0

34

100

145

167

180

196

208

218

221

225

HOT

0

35

92

130

148

166

172

178

189

190

192

ALTERNATOR MODEL

TEMP.

6-SERIES 12-VOLT 70-AMP MODELS

–22 –

© 2013 Ballard Commercial Industries, Inc. Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

141


142 N/A

11” 279.4mm 9.45" 240mm 8.4” 213.4mm 6.5" 165.1mm

51" 13mm

4.0” 101.6mm .75” 19.1mm 1.0" 25.4mm 2.9” 73.7mm .50” 12.7mm 1/2” x 13

98 SERIES

N/A

11" 279.4mm

9.6" 243.8mm

8.25" 209.6mm

8.25” 209.6mm

.58" 14.7mm

4.0” 101.6mm

.75” 19.1mm

1.25" 31.8mm

2.9” 73.7mm

.50” 12.7mm

1/2" x 13

97 SERIES

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

16

1/2” x 13

.50” 12.7mm

2.9” 73.7mm

1.0" 25.4mm

.75” 19.1mm

4.0” 101.6mm

.55" 13.97mm

6.5" 165.1mm

8.4" 213.4mm

9.45" 240mm

10.6” 269.2mm

95 SERIES

N/A

12

6.25" 158.8mm

.50” 12.7mm

2.9” 73.7mm

1.0" 25.4mm

.75” 19.1mm

4.0” 101.6mm

.52" 13.2mm

6.25" 158.8mm

7.7" 195.6mm

9.0” 228.6mm

9.0" 158.8mm

N/A

94 SERIES .38”/.5” 9.65mm 12.7mm 5/16”

.50" 12.7mm M10 x 1.25

16

10mm*

2.7” 68.6mm

2.9" 73.7mm

12

2.7” 68.6mm

1.0" 25.4mm

1.0" 25.4mm

16

5/16"

1.0" 25.4mm

N/A

.75” 19.1mm

3.15” 80mm

.55” 13.97mm

1”/2” 25.4mm 50.8mm

N/A

5.25" 133.4mm

6.7" 170.2mm

7.4" 188mm

N/A

5.25" 133.4mm

6.7" 170.2mm

7.4” 188mm

N/A

7.6" 193.0mm

7.6” 193.0mm

N/A

N/A

2” 50.8mm

6.0" 152.4mm

8.0" 203.2mm

9.0" 228.6mm

7.0" 177.8mm

N/A

6.25" 158.8mm

6.25" 158.8mm

AT-200 SERIES

6.0" 152.4mm

AT-165 SERIES

7.0" 177.8mm

12

M8 x 1.25

10mm*

2.7" 68.6mm

1.0" 25.4mm

.75" 158.8mm

4.0" 101.6mm

.55” 13.97mm

5.7" 144.8mm

6.5" 165.1mm

7.3" 185.4mm

7.0" 177.8mm

6.6" 167.6mm

6.25" 158.8mm

604 SERIES

9.0" 228.6mm

12

M8 x 1.25

.38"/.5" 9.65mm 12.7mm

2.7" 68.6mm

1.0" 25.4mm

N/A

N/A

1"/2" 25.4mm 50.8mm

5.7" 144.8mm

6.5" 165.1mm

7.3" 185.4mm

7.0" 177.8mm

6.6" 167.6mm

6.25" 158.8mm

621 SERIES

12

9.25" 235mm

12

M8 x 1.25

10mm*

2.7" 68.6mm

1.0" 25.4mm

.75" 19.1mm

3.15" 80mm

.55" 13.97mm

5.7" 144.8mm

6.5" 165.1mm

7.3" 185.4mm

7.0" 177.8mm

6.6" 167.6mm

6.25" 158.8mm

60 SERIES

14

97 EHDSERIES

9.2" 233.7mm

STATOR POLES

TENSIONING ARM BOLT DIAMETER/THREAD COUNT

MOUNTING FOOT BORE

STANDARD PULLEY DIAMETER

FRONT FOOT TO CENTER OF INSIDE SHEAVE

REAR FOOT WIDTH (Front-To-Back - With Bushing)

SADDLE WIDTH (Inside Dimension)

FRONT FOOT WIDTH (Front-To-Back)

CASE DIAMETER

BOLT-TO-BOLT, TENSIONER/MOUNTING FOOT

OVERALL ALTERNATOR HEIGHT

OVERALL LENGTH OF ALTERNATOR >110A

OVERALL LENGTH OF ALTERNATOR <120A

REAR TO CENTER OF INSIDE SHEAVE

ELECTRICAL

AlTERNATOR DIMENSIONS BY SERIES

Alternator Dimensions By Series

NOTES:

Alternator dimensions are correct as of publication date. In order to ensure quality, Balmar reserves the right to make changes which may affect alternator dimensions or

specification. Visit www.balmar.net for any product updates. Balmar is not liable for any damages or injuries resulting from product installation. See Balmar warranty and

ordering instructions on Page 3 of this catalog for more information .

Small case 60-SERIES are equipped standard with 10mm bore spacers and bushings. 8mm bore spacers and bushings are available for those units. Call Balmar

Customer Service at 360-435-6100.

621-Series alternators are equipped with a removable bushed 1” spacer for use in 2” installations. 1” mounts feature a .50” bore. 2” mounts feature a .38” bore. Please

specify mounting style for 7-Series alternators (71-Series is 1” foot. 712-Series is 2” foot.)

Always compare existing alternator & replacement alternator dimensions. Balmar cannot guarantee direct OEM replacement.

– 23 –


ELECTRICAL

! W E N

Smartgauge™ Advanced Battery Monitoring System

Smartgauge™ SmartBank

SmartBank

PRoVEN ACCuRATE IN INDEPENDENT TESTINg To WIThIN 5% oVER SIx MoNTh’S uSE!

PGM/Battery 2 Alarm

VOLTS Set

STATUS

BATT 2

Select

Exit

DISPLAYS BATTERY VoLTAgE AND STATE of ChARgE foR YouR houSE BATTERY BANk – AND VoLTAgE foR YouR ENgINE STARTINg BATTERY

Emergency Connect

Advanced Battery Monitor System

Balmar’s new Smartgauge™ Battery Management System provides at-a-glance information, so you can enjoy accurate and reliable updates on the condition of your batteries. Based on years of experienced engineering and rigorous, independent testing, the Smartgauge delivers dependable data even as your batteries experience extended use and cycling. Easy to install, and just as easy to program, the Smartgauge™ takes much of the mystery out of battery monitoring; just select the program that matches your battery type, and the Smartgauge™ automatically configures monitoring to your electrical system. Because of its proprietary computer modeling and battery testing techniques, the Smartgauge™ remains accurate without need for re-synchronization. The bright LED display and simple controls provide a user interface that’s intuitive and understandable, even for the most inexperienced crew member. Smartgauge™ is equipped with low and high voltage and low charge state alarm outputs which can be used to activate audible or visual alerts (buzzers or lamps). The Smartgauge™ can be used in 12-volt or 24-volt charging systems.

ExTREMELY EASY To INSTALL AND uSE. AuToMATICALLY ADjuSTS foR 12-VoLT oR 24-VoLT SYSTEMS ALARMS foR hIgh AND LoW BATTERY VoLTAgE AND LoW ChARgE STATE BRIghT, EASY-To-READ LED DISPLAY REquIRES No ShuNT oR CoMPLEx CABLINg – juST TWo oR ThREE WIRES REquIRED foR INSTALLATIoN VISIT WWW.BALMAR.NET foR MoRE INfoRMATIoN

Smartgauge™ Advanced Battery Monitoring System Model 24-SG-12/24

Voltage Range 8-40VDC

Temperature Range -25° to 85°C (-13° to 185°F)

Current Draw (Sleep/On)

Battery Programs For

Dimensions

ShWt

5mA/<15mA

Gel, AGM, Std. Flooded, Deep Cycle Flooded, Sealed Maintenance Free, Lead Acid Hybrid

4.3”W x 3.0”H x 1.1”D

1.5 lb

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

143


ELECTRICAL

UNDERWATER LIGHTING

• • • • • •

No Lens seal to leak Very low DC power consumption Very low heat emission Can be operated out of the water Long life, high output LED light engine High impact resistant polycarbonate housing.

AQUALUMA 1 SERIES • • • • • • • • • • •

Master, Slave & Driver Set Wide angle elliptical beam 12° x 50° Light engine will accept 12 volt DC power source Serviceable from inside the boat Available in white, blue or green Cabling to suit your application: IP68 connectors Master to Slave, your loom to Master Ignition Protected No bonding to anodes required (Housing cannot corrode) 5 year Warranty Easy install = low installation cost *Aqualuma Sealant Supplied Code

144

Description

Power (@ 12 V)

Overall length (mm)

Ø Hole size (mm)

Ø Front face (mm)

470700

Aqualuma Blue 1 Series Light

less than 0.5 Amps per light

113.25 (4″)

47.6 (1.87″)

69 (2.7″)

470704

Aqualuma White 1 Series Light

less than 0.5 Amps per light

113.25 (4″)

47.6 (1.87″)

69 (2.7″)

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


ELECTRICAL

AQUALUMA 3 SERIES • • • • • • • • •

@ 12 volts or 0.3 of an amp @ 24 volts. High impact resistant polycarbonate housing. No bonding to anodes required. (Housing cannot corrode) Light engine will accept 12 or 24 volt DC power source. Serviceable from inside the boat. Available in white or blue. No bonding to anodes required (Housing cannot corrode) Each Light comes with 3.7 metres (13 feet) of cable. Easy install = low installation cost. Code

Description

Power (@ 12 V)

Overall length (mm)

Ø Hole size (mm)

Ø Front face (mm)

470710

Aqualuma Blue 3 Series Light with Standard Lens

0.3 Amps per light

113.25 (4″)

58 (2.25″)

110 (4.33″)

470712

Aqualuma Blue 3 Series Light with Wide Lens

0.3 Amps per light

113.25 (4″)

58 (2.25″)

110 (4.33″)

470714

Aqualuma Green 3 Series Light with Standard Lens

0.3 Amps per light

113.25 (4″)

58 (2.25″)

110 (4.33″)

470716

Aqualuma Green 3 Series Light with Wide Lens

0.3 Amps per light

113.25 (4″)

58 (2.25″)

110 (4.33″)

470718

Aqualuma White 3 Series Light with Standard Lens

0.3 Amps per light

113.25 (4″)

58 (2.25″)

110 (4.33″)

470720

Aqualuma White 3 Series Light with Wide Lens

0.3 Amps per light

113.25 (4″)

58 (2.25″)

110 (4.33″)

AQUALUMA 6 SERIES • • • • •

Corrosion proof, injection molded polycarbonate housing. Operating voltage - 12 or 24 volts DC Operating current: less than 1 amp @ 12V or ½ an amp @ 24V. Includes 3.7m/12ft of cabling & AQUALUMA Sealant Available in Blue, Green or White

Code

6 Series

Description

Power (@ 12 V)

Overall length (mm)

Ø Hole size (mm)

Ø Front face (mm)

470730

Aqualuma Blue 6 Series Light

less than 1 Amp per light

145 (5.7″)

120 (4.72″)

76 (3″)

470732

Aqualuma Green 6 Series Light

less than 1 Amp per light

145 (5.7″)

120 (4.72″)

76 (3″)

470734

Aqualuma White 6 Series Light

less than 1 Amp per light

145 (5.7″)

120 (4.72″)

76 (3″)

UNDERWATER CAMERA LUMA-VU UNDERWATER CAMERA • • • • • • • • • • • • •

Hi Res Colour CCTV Camera Hi Res 520 TV lines NTSC or Pal Format Scanning system NTSC 525 lines, PAL 625 lines 3.6mm Lens = 92° Viewing Angle Sony image sensor Power source DC 12 volts (tolerance 10-15 volts) Operating current 130 mA Front face and sealing flange - 110mm/4.33” Overall length - 110.5mm/4.35” Hole saw size - 60mm/2 3/8” The camera is supplied with 15m/49ft of video and power supply cable. Includes AQUALUMA Sealant Code

Description

470750

Aqualuma Luma VU Underwater Camera NTSC

470752

Aqualuma Luma VU Underwater Camera Pal

Power (@ 12 V)

Power (@ 12 V)

130

130 mA

less than 1 amp per light

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

145


ELECTRICAL

ACCON POP-UP LIGHTS LED POP-UP LIGHT (GREEN / RED) • USCG approved 2 nautical miles. • The only Pop-Up® LED light on the market. • Keeps deck free of protruding lights, folds down flush with deck when not in use. • Made of marine grade 316 stainless steel. • An optional plastic cup prevents unwanted water runoff below deck. • Green / Red LED Lights

INSTALLATION • Drill a 3 1/2″ diameter hole using a hole saw. • Fasten with three #10 screws (not included). Code

Description

415010

Pop-up light Green/Red 210-M

415010-MC

Waterproof cup for above

415011

Pop-up light Green/Red 211-M

415011-MC

Waterproof cup for above

Optional Waterproof Cup Molded plastic cup prevents unwanted runoff below the deck. (Not pictured)

STAINLESS STEEL POP-UP LIGHTS • USCG approved 1 nautical mile. • Keeps deck free of protruding lights, folds down flush with deck when not in use. • Made of marine grade 316 stainless steel. • Bow, port, starboard and side lights available • Uses a #78 bulb • MMA type accepted • Meets 72 Colregs Code

Description

415004

Stainless Steel Bow Light 204-M

415005

Stainless Steel Port Light 205-M

415006

Stainless Steel Starboard Light 206-M

415007

Stainless Steel Side Lights - Pair 207-M

415002

Waterproofing Cup

PLASTIC BOW POP-UP LIGHT Code

Description

145001-B

130.6mm x 85.73mm UV resistant Pop-Up light, BLACK 130.6mm x 85.73mm UV resistant Pop-Up light, WHITE

145001-W

146

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


ELECTRICAL

MOUNTS

Equipment Catalogue 2013/JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

147


ELECTRICAL

MAST-MOUNT ANTENNA PLATFORMS

148

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


6 ADREDCW H K AHRAER D W A R E

TV LIFT

Equipment Catalogue 2013/JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

149


6 ADREDCW H K AHRAER D W A R E

BOLTS & CATCHES BARREL BOLT Brass or Chrome BRASS CODE

CHROME CODE

BASE WIDTH MM

LENGTH MM

BOLT TRAVEL MM

BOLT DIA MM

115135

32 35

102 109

20 25

8 10

115132 115134

SCREW WEIGHT SIZE # GRAMS

4 6

85 142

BARREL BOLT 316 Cast Stainless Steel

Supplied with friction pad to eliminate rattle and to provide smooth operation. CODE 115130 115140

BASE WIDTH MM

LENGTH / TRAVEL MM

BOLT DIA MM

SCREW SIZE #

38 38

92 / 19 108 / 33

9 9

4 4

SLIDE BOLT Brass

This traditional design features highly polished brass construction, a large knob for easy operation and snug slide to prevent rattling.

CODE

BASE MM

LENGTH MM

DEPTH MM

TRAVEL MM

115154

40

111

38

14

CATCH - CABINET Brass

Made from extruded brass with all stainless balls and springs. Has adjustable spring-loaded bearings. Marine grade; will not rust. CODE

LENGTH MM

115160

50

WIDTH MM HEIGHT MM

10

SCREW WEIGHT # GRAMS

14

4

28

CATCH - CUPBOARD Brass or Chrome

Convenient handle with spring loaded catch. Features a stainless steel spring and long wearing parts. BRASS CODE 115188

CHROME CODE

LENGTH MM

WIDTH MM

115189

67

44

SCREW WEIGHT SIZE # GRAMS

8

198

CATCH - PUSH BUTTON Brass or Chrome

Push button release latch automatically latches when door is closed. Fits doors 16-35mm thick. Includes handle, mounting through bolts, spring loaded catch and striker plate BRASS CODE 115200

150

CHROME CODE

BASE MM

SCREW SIZE #

WEIGHT GRAMS

115201

20 x 51

8

85

Equipment Catalogue 2013 /JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


6 ADREDCW H K AHRAER D W A R E

CATCH - CABINET Push Button

Easy to install, safe and attractive outline. Button trim and interior spring are made of stainless steel to avoid corrosion. Can be used for thickness from 12.5mm to 25 mm. Standard thickness 20mm. CODE 115250

DESCRIPTION

Chrome Plated (Silver) Titanium Plated (Gold)

115251

CATCH - CABINET - REMOTE Push Button

Easy to install, safe and attractive outline. Button trim and interior spring are made of stainless steel to avoid corrosion. Can be used for thickness from 12.5mm to 25 mm. Standard thickness 20mm. CODE 115255

DESCRIPTION

Chrome Plated (Silver) Titanium Plated (Gold)

115256

GEAR HAMMOCK HOOKS White nylon mini-hammock that provides ventilated, flexible storage for just about anything. Hooks designed to be used with “Gear Hammock” (Sold in pairs only.) CODE 115333

LENGTH MM

WEIGHT GRAMS

Hooks 32 x32

10

DOOR BUMPER Brass or Chrome

Door bumper provides a cushion for door knob and protects bulkhead. CODE BRASS 115445

CODE CHROME 115446

HEIGHT MM 20

DIA 49

SCREW SIZE # 6

WEIGHT GRAMS 57

DOOR HOLDER - INTERIOR Brass, Chrome or Stainless Steel

The spring loaded latch automatically catches the striker plate, holding the door firmly open against the rubber cushion. No more rattling or slamming doors. Latch spring is 304 SS CODE

BASE DIAMETER MM

WALL-DOOR DISTANCE MM

SCREW SIZE

WEIGHT GRAMS

115460

51

95

6

180

DOOR HOLDER - EXTERIOR 316 Cast Stainless Steel

Spring loaded latch automatically catches the striker plate to hold the door firmly open against the rubber cushion. No more rattling or slamming doors. Robust holders for heavier external doors. CODE SS 115470

BASE DIA MM 51

WALL-DOOR DISTANCE MM 65

SCREW SIZE # 6

WEIGHT GRAMS 170

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

151


6 ADREDCW H K AHRAER D W A R E

DOOR HARDWARE DOOR HANDLE Brass or Chrome

Handle has rounded design with no sharp edges. CODE BRASS

BASE WIDTH MM

LENGTH MM

HEIGHT MM

SCREW SIZE #

WEIGHT GRAMS

115550 115554

14 20

92 121

22 29

6 8

35 50

DOOR HANDLE Brass

Handle has rounded design with no sharp edges. Grip space is a full 35mm inside. CODE BRASS 115570

BASE WIDTH MM

LENGTH MM

HEIGHT MM

SCREW SIZE #

WEIGHT GRAMS

48

152

46

14

227

DRAWER KNOB Brass or Chrome

Cupboard or cabinet knob is easy to install. Includes 25 mm long brass screw. CODE BRASS 115620

CODE CHROME 115621

KNOB DIA MM 25

BASE DIA MM 16

HEIGHT MM 21

DOOR LOCKSETS SUITABLE FOR EXTERNAL AND INTERNAL DOORS BETWEEN 26 AND 35MM THICKNESS. ALL PARTS ARE CAST 316 SS, POLISHED TO A HIGH GLOSSY FINISH.

DOOR LOCK SET

DOOR LOCK WITH TURN BUTTON

316 Cast Stainless Steel CODE 115610

152

316 Cast Stainless Steel

A MM

B MM

C MM

D MM#

E MM

F MM

131

60

17

12

90

3

CODE 115611

A MM

B MM

C MM

D MM#

E MM

F MM

182

60

17

12

138

3

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


6 ADREDCW H K AHRAER D W A R E

SLIDING DOOR KEY LOCK & LATCH 316 Cast Stainless Steel CODE 115615

A MM

B MM

C MM

D MM#

E MM

F MM

G MM

106

73

20

130

62

4

3

SLIDING DOOR LOCK & LATCH 316 Cast Stainless Steel CODE 115616

A MM

B MM

C MM

D MM#

E MM

F MM

G MM

106

73

20

130

62

4

3

PANEL ANCHORS FLOOR PANEL ANCHORS Bronze or 316 Cast Stainless Steel

Removable floor panel fasteners designed and engineered to secure floorboards to the cabin sole. The opening mechanism is a simple bayonet style, with 1/4 turn lock and release that will not loosen with age. CODE 115630B 115630 115640 115640B 115631

DESCRIPTION

Brass Floor Anchor for floorboards 13-19mm SS Floor Panel Anchor SS Floor Panel Anchor for 19-26mm panels Brass Floor Anchor for floorboards 26-32mm Installation Kit

PANEL ANCHORS TYPE 1 - LIGHT DUTY Stainless Steel

Phillips head ¼ turn release panel anchors ideal for securing any type of removable panel. CODE 117455

STUD DIA MM 3

117456 117457 117450

GROMMET OD MM 13

GROMMET PANEL TYPE THICKNESS Small Flush 1.6-3

Light Duty Stud - Type 1

3 13 Small Flush 6(+-3) 3 13 Small Flush 13(+-3) Type 1 Adjustable Receiver allows for 10mm Adj

Adjustable Receiver

PANEL ANCHORS TYPE 2 - HEAVY DUTY Stainless Steel

Phillips Head ¼ turn release panel anchors ideal for securing any type of removable panel.

CODE 117467 117460 117461

STUD DIA MM 5

GROMMET OD MM 22

GROMMET TYPE Wide Flush

PANEL THICKNESS 13(+-3)

Heavy Duty Stud Type Wide Flush Grommet

Type 2 Adjustable Receiver allows for 10mm Adj Type 2 Floating Receiver allows for some misalignment

Floating Adjustable Receiver Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

153


6 ADREDCW H K AHRAER D W A R E

HASPS & STAPLES HASP & STAPLES Brass or Chrome

Spring-loaded padlock eye swivels to latch in place. CODE

WIDTH MM

LENGTH CLOSED MM

26

76

115654 (BRASS)

PADLOCK SCREW HOLE DIA SIZE MM MM#

11

WEIGHT GM

6

71

HASP & STAPLES - SWIVEL EYE Brass, Chrome or Cast 316 SS

Spring-loaded padlock eye turns to lock latch in place CODE

WIDTH MM

LENGTH CLOSED MM

26 26

76 76

115667 (SS) 115665 (BRASS)

PADLOCK SCREW HOLE DIA SIZE MM MM#

10 10

WEIGHT GM

6 6

85 85

HASP & STAPLE CODE 115656

DESCRIPTION

26 x 64mm Hasp and Staple, pressed SS

TABLE LEG FASTENER BRASS 117511

CHROME

BASE SIZE

117512

38.1mm x 22.23mm

HATCH FITTINGS HATCH ADJUSTER TELESCOPING Pressed Stainless Steel

Light duty support for small hatches and windows. Locked with black plastic knob

CODE

EXTENSION LENGTH MM

OVERALL LENGTH MM

DIA MM

115670

203

365

11

HATCH ADJUSTER TELESCOPING Brass or Chrome

Easily adjusts to any length and is securely positioned by the positive locking mechanism. (Sold individually.) CODE

CLOSED LENGTH MM

EXT. LENGTH MM

Screw size

TUBE DIA MM

Weight grams

115680 (SS)

300

430

10

13

340

154

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


6 ADREDCW H K AHRAER D W A R E

HATCH SPRING HOLDER Stainless Steel

Rigid support for hatch or window when open. To close, simply apply side pressure to the coil to collapse the spring. CODE

SPRING LENGTH MM

OVERALL LENGTH MM

DIA MM

115700

254

260

11

115702

305

280

14

PORTLIGHT CHAIN, T-BAR CHROME CODE

DESCRIPTION

117801

8” PORTLIGHT CHAIN CHROME

HATCH FASTENER Stainless Steel

“Over centre” can action to lock position. Distance between latch and lock is adjustable via threaded stem. CODE

WIDTH MM

OVERALL LENGTH MM

ADJUSTMENT LENGTH MM

SCREW SIZE

115722

40

155

45

10

HATCH - CLAMP LATCH Brass or Chrome

Centre tensional device ideal for hatches, doors, cabinets, or wherever tension is needed. CODE WIDTH MM LENGTH MM

SCREW

WEIGHT GM

115730 (BRASS)

41

83

8

113

115731 (CH)

41

83

8

113

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

155


6 ADREDCW H K AHRAER D W A R E

HATCH FASTENER - KNOB Brass or Chrome

Knurled knob for easy grip. Threads on end of stud are staked to prevent the knob from falling off. Knob fits into recess on catch mount. CODE BRASS

CODE CHROME

CODE BRONZE

LENGTH OPEN (MM)

LENGTH CLOSED (MM)

SCREW SIZE

WEIGHT GRAMS

115740

115741

115740A

102

63.5

8

198

HATCH FASTENER - T BAR Brass or Chrome

T-bar will not accidentally catch when hatch is closed from deck. Threads on end of stud are staked to prevent losing the wing nut. CODE CHROME

LENGTH OPEN (MM)

LENGTH CLOSED (MM)

SCREW SIZE

WEIGHT GRAMS

115746

102

51

8

142

HATCH - LOCKING CAM LATCH Brass or Stainless Steel

Centre latch tensions hatches, doors, cabinets and other items for a tight seal. Will accept a 8mm diameter padlock. CODE BRASS

CODE STAINLESS STEEL

MOUNT TYPE

LENGTH (MM)

WIDTH (MM)

SCREW SIZE

WEIGHT GRAMS

115750

115751

Reverse

108

36

10

142

115752

-

Open

127

36

10

142

CABINET HINGE - OFFSET, SELF CLOSING Brass or Chrome

Self-closing mechanism has heavy duty stainless steel springs on high impact nylon cam slide to provide a smooth and quiet action. (Sold in pairs only) CODE BRASS

CODE CHROME

OFFSET MM

LENGTH (MM)

GAUGE THICKNESS MM

SCREW SIZE

116015

116016

10

56

1.65

5

CABINET HINGE - CUDDY DOOR Brass or Chrome

Very heavy gauge. Precision machined and polished to a mirror finish (Sold in pairs only.) CODE BRASS

CODE CHROME

LENGTH (MM)

WIDTH MM

SCREW SIZE

WEIGHT GRAMS

116020

116021

76

33

8

156

LIFT-OFF HINGE, RIGHT CODE

WIDTH (MM)

LENGTH OPEN MM

MATERIAL

116305

48

95

Brass

116307

48

95

Cast SS

HINGE - SHORTSIDE DOOR 316 Cast stainless steel Code

Width (mm)

Length Open mm

Split mm

Pin Height mm

Screw size #

116241

36

59

39/20

8

5

156

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


6 ADREDCW H K AHRAER D W A R E

HINGE - BUTT EXTRUDED FAST PIN Brass or Stainless Steel

Removable pin. Very heavy gauge. Precision machined and polished to a mirror finish. Depending on size, hinges may have 2 or 3 holes. (Sold in pairs only) CODE

MATERIAL

WIDTH OPEN MM

LENGTH MM

SCREW SIZE #

WEIGHT GMS

116148

SS

51

51

8

142

116140

Brass

41

41

6

85

116143

Brass

41

50

6

99

116152

Brass

64

64

8

241

116155

Brass

41

76

6

142

116161

Brass

76

76

10

269

116144

Chrome

41

50

6

99

116147

Chrome

51

51

8

142

116153

Chrome

64

64

8

241

116159

Chrome

51

76

8

283

HINGE - “H” (LIFT OFF) Brass or Chrome

Includes brass pin and pivot. Please specify right or left direction when ordering (Sold in pairs only).

CODE BRASS

CODE CHROME

LENGTH MM

WIDTH OPEN MM

SCREW SIZE #

WEIGHT GMS

116273

116274

38

38

6

71

116282

116283

50

38

6

85

116294

116295

70

38

6

142

HINGE - DOOR

316 Cast Stainless Steel Thick hinged plates. Radiused edges, no sharp corners. Code

Width (mm)

Length Open mm

Plate Thickness mm

Height Pivot mm

116230

82

101

4

11

116234

102

102

4

12

116236

127

127

4

12

HINGE - DOOR UTILITY 316 Cast stainless steel Code

Width (mm)

Length Open mm

Pin Height mm

Screw size #

116251

38

75

10

5

CAST 316 SS DOOR UTILITY HINGE 71MM Code

Width (mm)

Thickness mm

Pin Height mm

116248

71

5

37

HINGE OFFSET 316 Cast stainless steel 300 mm thick hinge plates. (Sold in pairs) Code

Width (mm)

Length Open mm

Pin Height mm

Offset Screws #

Screw size #

116326T

38

53

10

15/37

5

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

157


6 ADREDCW H K AHRAER D W A R E

BUTT HINGE CAST SS Code

Length Open mm

Height mm

116080

38

38

Pair

116087

50

53

Pair

HINGE CABIN CONCEAL STUD CODE

LENGTH OPEN MM

WIDTH MM

DEPTH MM

116112

51

38

7

116113

71

38

6

HINGE BUTT CONCEAL STUD CODE

LENGTH OPEN MM

WIDTH MM

DEPTH MM

116115

50

37

6

116116

51

50

7

116117

77

49

7

116118

76

76

7

HINGE - STRAP Cast Brass or Chrome

Very heavy gauge. Precision machine polished to a mirror finish. (Sold in pairs only.) Code BRASS

CODE CHROME

Length Open mm

WIDTH MM

SCREW SIZE

WEIGHT GRAMS

116345

116346

152

33

10

312

HINGE - STRAP

316 Cast Stainless Steel

116351

3mm thick hinged plates. Radiused edges, no sharp corners. (Sold in pairs.) CODE

WIDTH (MM)

LENGTH OPEN MM

PIN HEIGHT MM

MOUNT SCREW SIZE C/S

116351

26

104

10

5

STRAP HINGE CODE SS

WIDTH PLATE(MM)

LENGTH OPEN MM

116366

42

180

Pressed 304 SS

HINGE - “T”

Brass, Chrome or 316 Cast Stainless Steel Very heavy gauge. Precision machine polished to a mirror finish. (Sold in pairs only.) CODE BRASS

CODE CHROME

116370

116371

CODE SS

WIDTH PLATE(MM)

LENGTH OPEN MM

PIN LENGTH MM

SCREW SIZE #

62

102

38

8

HINGE - “T” CAST SS CODE SS

LENGTH O/A MM

SHORTSIDE HEIGHT MM

SHORTSIDE WIDTH MM

LONGSIDE WIDTH MM

PIN HEIGHT MM

116375

195

91

49

146

37

158

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


6 ADREDCW H K AHRAER D W A R E

HINGE - TABLE

Brass, Chrome or 316 Cast Stainless Steel Hinges lock into place flush with surface when opened. Fold flat 180° when closed. (Sold in pairs only) Code Brass

Code Chrome

Width (mm)

Length open (mm)

Screw size #

116380

116381

13

64

6

LIFT HANDLES & RINGS LIFT HANDLE

Brass or Stainless Steel Handle fits flush into plate which can be recessed into the hatch. Stainless Steel hinge pin. CODE

MATERIAL.

WIDTH MM

LENGTH MM

SCREW

WEIGHT GRAMS

116606

CHROME

70

95

8

241

LIFT HANDLE WITH CATCH Brass or Chrome

Handle fits flush into hatch door. Positive stainless steel spring locks catch and easily releases when handle is lifted. Includes striker plate. CODE

MATERIAL.

WIDTH MM

LENGTH MM

SCREW

WEIGHT GRAMS

116615

BRASS

44

73

8

227

116616

CHROME

44

73

8

227

BRASS CABINET PULL CODE 116610

DESCRIPTION

41 x 67 mm Brass Cabinet pull

LIFT RING PULL - RECTANGULAR Brass, Chrome or Stainless Steel

Convenient flush fitting ring pull for cabinets, small doors and hatches. CODE BRASS

CODE CHROME

116690

116691

-

30

38

10

5

30

-

116697

38

47

10

5

35

-

-

51

67

13

6

85

116700

CODE SS

WIDTH (MM)

LENGTH (MM)

DEPTH MM

SCREW SIZE #

WEIGHT GRAMS

LIFT RING PULL - ROUND Brass or Chrome

Flush mounting ideal for cabin sole or hatches CODE BRASS

CODE CHROME

OD DIA MM

DEPTH MM

SCREW SIZE

WEIGHT GRAMS

116725

116726

51

14

8

99

LIFT RING - SPRING LOADED Pressed Stainless Steel

Single finger, pressed stainless steel flush pull. Suitable for smaller boards, fridge lids, hatches, etc.... CODE

WIDTH MM

LENGTH MM

DEPTH MM

MOUNT SCREWS C/S

116680

38

44

10

4

116682

56

66

11

4

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

159


6 ADREDCW H K AHRAER D W A R E

ANTI-RATTLE LIFT RING 76MM SS CODE 193714

DESCRIPTION

Anti-rattle lift ring 76mm ss

CUSTOM LOCK 316 Stainless Steel

Cylindrical custom lock with straight dog. CODE

FLANGE DIA MM

THREAD DIA MM

THREAD DEPTH MM

DOG LENGTH MM

117100

22

18

28

48

ANTI RATTLE SASH FASTENER - WINDOW Brass or Chrome

Locks sliding window in any position. Black rubber button is attached to threaded knurled knob which is easy to turn CODE BRASS

CODE CHROME

BASE WIDTH MM

SHAFT LENGTH MM

SCREW SIZE

WEIGHT GRAMS

117425

117426

29

51

8

170

BOW ROLLERS BOW ROLLER - FIXED Cast 316 Stainless Steel

Fixed Bow Roller, Traditional looking with cast SS roller. CODE

LENGTH MM

MOUNT BASE. MM

WIDTH MM

110198

890

400

295

BOW ROLLER - FIXED WITH PIN Pressed Stainless Steel

One piece pressed, heavy gauge, stainless steel housing. Black delrin roller. Spring loaded, quick release captive pin to retain anchor warp. CODE

LENGTH MM

MOUNT BASE. MM

WIDTH MM

110200 110202

197

97 X 57

67

225

125 X 57

67

BOW ROLLER - HINGED WITH PIN Pressed Stainless Steel

Formed from heavy gauge stainless steel. Double roller, hinged nose section designed to secure anchor as well as automatically deploy and retrieve the anchor. Spring loaded, quick release captive pin to retain anchor warp. CODE

LENGTH MM

110206 110208 110210

160

MOUNT BASE. MM

WIDTH MM

327

96 x 57

60

355

125 x 57

60

380

145 x 57

60

Equipment Catalogue 2013 /JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


6 ADREDCW H K AHRAER D W A R E

BIMINI HINGES IMAGE

CODE

DESCRIPTION

110079

Bimini Universal Hinge SS

110080

Bimini Top Hinge Quick Release

NOTES

Low profile Quick Release 316 stainless steel hinge. Surface mount, no cut-outs are necessary. Easily remove or install top without having to keep track of screws and pins. The hinge snaps into base and stays attached to bimini when separated.

110081

Side Mount Quick Release Bimini Top Hinges

Universal hinge post for 7/8” tubing

110082

Side Mount Quick Release Bimini Top Hinges

Universal Hinge mount for 1” tubing

110085

Flush Mounted Quick Release Hinge

SS Quick Release Hinge 38.1mm W x 69.85mm.

110086

Rail Mount Quick Release Hinge

SS Quick Release Hinge Fits 22.23mm & 25.4mm Rail

110087

Surface Mount Quick Release Hinge

SS Quick Release Hinge 63.5mm Round x 15.875mm High

110088

Bimini Top Flush Mounted Hinge for Square Tube

Designed to be installed on 31.75mm square tubing 63.5mm L x 24.6mm W

110089

Round Tube Adapter Quick Release Hinge

Tube adapter fits 1” bimini tops, flag poles or straight handrails. 63.5mm Round x 15.875mm

110091

Bimini Top Flush Oval Surface Mount for Round Tube

Tube adapter fits 1” bimini tops, flag poles or straight handrails.

110094

Bimini Top Flush Small Surface Mount for Round Tube

Tube adapter fits 1” bimini tops, flag poles or straight handrails.

110095

Bimini SS Bimini Strap Hinge

Holds down bimini straps

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

161


6 ADREDCW H K AHRAER D W A R E

BOARDING LADDERS BOARDING LADDER TOP MOUNT TELESCOPING

BOARDING LADDER TOP MOUNT TELESCOPING - WIDE MODEL

Stainless steel two, Three and Four Step, fold down telescopic ladders designed for mounting on the top of horizontal surfaces such as duck boards, transoms or pontoons. Grooved black nylon threads

Stainless steel three Step, Wider model with grooved nylon treads

LENGTH MM

LENGTH EXT. MM

WIDTH RETRACTED MM

GUDGEON MM

CODE

STEPS

LENGTH MM

LENGTH EXT. MM

WIDTH RETRACTED MM

GUDGEON MM

3

889

385

254

180

110066

3

812

381

432

145

4

1168

435

310

165

CODE

STEPS

110052 110054

BOARDING LADDER UNDER MOUNT - BOARDING LADDER TELESCOPING WITH SLIDE UNDER MOUNT - TELESCOPING - FIXED SS two Step Ladder designed for fixed mounting under duckboard or transom. Grooved nylon treads.

Three Step Ladder designed with slide to mount horizontally under duckboard or transom. Telescoping mechanism retracts within the slide, when stowed. Grooved nylon treads. SS CODE

STEPS

LENGTH MM

LENGTH EXT. MM

WIDTH RETRACTED MM

GUDGEON MM

CODE

STEPS

LENGTH MM

LENGTH EXT. MM

WIDTH RETRACTED MM

GUDGEON MM

110064

3

890

400

295

0

110070

2

562

343

280

-

162

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


D

6 ADREDCW H K AHRAER D W A R E

LADDER LOCKS, CHROME BRONZE PAIR CODE

DESCRIPTION

By attaching these Ladder Locks whether inside or outside of ladder, you are guaranteed that ladder will be held securely in place. Ladder cannot work loose, although it can be instantly removed.

110104

BOLLARDS BOLLARD - SPLIT

Highly Polished Cast 316 Stainless Steel Heavy duty cast 316 grade stainless steel construction. Passivated and highly polished. The slotted centre shaft simply and effectively secures the anchor chain. Suitable for regular or long link chain. CODE BRASS

CHAIN SIZE MM

EXTENDED PIN

HEIGHT MM

WIDTH MM

110142

8-10

110146

10 - 13

yes

84

62 x 62

yes

116

110146NP

10 - 13

89 x 89

no

116

89 x 89

CHOCKS CHOCKS - STRAIGHT Chrome or Stainless Steel Bronze also available CODE

MATERIAL

LENGTH MM

WIDTH ROPE MM

110287

STAINLESS STEEL

127

6.5

110290

STAINLESS STEEL

152

16

110293

STAINLESS STEEL

228

30

CHOCKS PORT & STARBOARD Cast 316 Stainless Steel CODE

LENGTH MM

WIDTH ROPE MM

110295

110

19

110296

152

26

110298

229

44

Sold in pairs

CHOCKS LIFT UP Cast 316 Stainless Steel

Flush fitting SS chocks lift out when needed CODE

TYPE

LENGTH MM

WIDTH MM

DEPTH BELOW DECK MM

EXTENDED HEIGHT ABOVE DECK MM

110310 110311

PT & STB

115

38

66

20

PT & STB

152

38

66

20

110315

STERN

115

38

66

20

110316

STERN

152

38

66

20

Equipment Catalogue 2013/JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

163


6 ADREDCW H K AHRAER D W A R E

CLEATS SIZES RANGE BETWEEN 100 AND 375 MM (4” TO 15”). WE STOCK A WIDE RANGE OF CLEATS. IF THE CLEAT YOU REQUIRE IS NOT LISTED, PLEASE ASK.

CLEATS - MOORING Cast 316 Stainless Steel

Heavy duty cast 316 grade stainless steel construction. Large open base for ease of line handling. CODE

LENGTH MM

WIDTH MM

HEIGHT MM

MOUNT SCREWS MM C/S

110360

135

60

30

6

110362

203

60

40

6

110364

254

65

45

8

110366

305

110

55

12

110368

381

140

70

12

WIDTH MM

HEIGHT MM

MOUNT SCREWS MM C/S

CLEATS - MOORING Cast Alloy

Open base with radius on corners CODE

LENGTH MM

110372

254

85

60

8

110373

330

100

75

10

110374

360

110

85

12

CLEATS SURFBOARD - FLAT Cast 316 Stainless Steel

New contemporary design, with flat top. Each includes studs, nuts, washers and alloy backing plate. Polished chafe plates are optional. FLAT CLEAT KIT W/ CHAFE PLATE

FLAT CLEAT KIT

LENGTH MM

STUD LENGTH MM

110390

110391

115

53

110392

110393

152

53

110394

110395

203

63

110396

110397

254

63

110398

110399

305

63

110400

110401

381

63

CLEATS SURFBOARD - ROUND Cast 316 Stainless Steel

New contemporary design, with slightly reversed curved top. Each includes studs, nuts, washers and alloy backing plate. Polished chafe plates are optional. ROUND CLEAT W CHAFE PLATE

164

ROUND CLEAT KIT

LENGTH MM

STUD LENGTH

110414

110415

203

63

110416

110417

254

63

110418

110419

305

63

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


6 ADREDCW H K AHRAER D W A R E

CLEATS - HERRESHOFF SLIMLINE Cast 316 Stainless Steel

Traditional “Old faithful”, slim line bar cleat. Bronze available on request. CODE

LENGTH

HEIGHT

110540

102

29

110545

152

33

110550

203

40

110555

254

47

110560

305

54

CLEATS - HERRESHOFF Heavy Duty Cast 316 Stainless Steel

Traditional “Old faithful” but thicker overall for heavier duty mooring than the slim line versions. 450 mm available on indent. CODE

LENGTH

HEIGHT

110562

203

51

110564

254

62

110566

305

72

110568

381

105

CLEATS - SURFACE MOUNT FOLDING 316 Cast Stainless Steel Code Stud Bolted

Length mm

Width mm

Height Above Deck mm

Clearance mm

110450

159

61

12

13.97

110452

213

83

16

19.05

110454

253

110

20

24.13

THRU-BOLTED 110458

114.3

48.26

10.16

11.43

110460

159

61

12

13.97

110462

152

83

16

19.05

110464

253

110

20

24.13

CLEATS - SLIM LINE PULL UP Cast 316 Stainless Steel

Narrower versions for use in tight spaces. Optional waterproof cups with drain spigot available. PRODUCT

110512 110512-C 110514 110514-C 110516 110516-C 110518 110518-C

CLEAT LENGTH MM

OVER ALL LENGTH MM

WIDTH MM

DEPTH MM

HEIGHT ABOVE DECK MM

CLEARANCE

110

127

33

64

9

14

173

38

76

13

18

229

51

104

17

25

257

71

122

20

25

Waterproof Cup 150 Waterproof Cup 203 Waterproof Cup 255 Waterproof Cup

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

165


6 ADREDCW H K AHRAER D W A R E

FLUSH MOUNTED POP-UP CLEAT PRODUCT 110490 110490-C 110491 110491-C 110492 110492-C 110493 110493-C

SIZE 4.5”

WEIGHT LENGTH MM .45kg

WIDTH MM

DEPTH CLEARANCE MM MM

133.4

47.6

76

22

171.5

58.7

76

25

228.6

66.7

95

27

276

85.7

114

35

Waterproofing Cup 6”

.68kg

Waterproofing Cup 8”

1.13kg

Waterproofing Cup 10”

1.91kg

Waterproofing Cup

CLEATS - PULL UP Cast 316 Stainless Steel

The biggest flush mounted cleat available, rated for loads to 20,000 kg. Includes drain cup with spigot. Recess in the base for fingers to lift up cleat. CODE

110500 110502 110504 110506 110510

CLEAT LENGTH MM

OVERALL LENGTH MM

WIDTH MM

DEPTH CLEARANCE MM MM

110

138

48

70

19.5

152

178

73

89

25

203

229

25

120

35

255

279

89

165

38

375

432

180

135

45

LIFTING CLEATS Cast 316 Stainless Steel • • • • •

Sealed base eliminates the need for a waterproofing cup. Water can be drained through a fitting at the bottom of the unit. Can be converted to a lifting cleat by inserting a connecting rod in the base of the unit and attaching the rod to the bow eye. Cleat is made of marine-grade stainless steel, type 316; all other parts are 304 ss. Cleat is available in four sizes: 4 1/2”, 6”, 8” & 10”, with the 10” also available in stud mount, as part number 209-10-s. CODE 110530 110531 110532 110533 110530-LH 110531-LH 110532-LH 110533-LH

166

DESCRIPTION

CLEAT LENGTH “

CLEAT LENGTH MM

Lifting Cleat Complete

4

Lifting Cleat Complete

6

152

Lifting Cleat Complete

8

203

Lifting Cleat Complete

10

254

Lifting Hardware Only for 110500

-

-

Lifting Hardware Only for 110502

-

-

Lifting Hardware Only for 110504

-

-

Lifting Hardware Only for 110506

-

-

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


6 ADREDCW H K AHRAER D W A R E

OVAL LIFTING EYE W/ ALL HARDWARE CODE 110525

DESCRIPTION

Small compact unit. Unit can be drained or sealed water tight. Hub pivots two ways to overcome a slight misalignment at installation. All stainless steel parts; eye and base are 316, lifting hardware is 304. The sling is a solid casting for increased strength. Requires less clearance under deck than our lifting cleats.. Fastens to deck with four #10 screws.

ROUND LIFTING EYE W/ ALL HARDWARE CODE 110527

DESCRIPTION

Complete lift eye assembly Lift-eye w/ base

110528

SKI TOW EYE CODE 111620 111624

DESCRIPTION

10 x 38mm Ski Tow Eye 13 x 89mm Ski Tow Eye Heavy Duty

SKI HOOK SS CODE 111625

DESCRIPTION

Ski Hook SS

52MM TIE DOWN, SS CODE 111635 111636

DESCRIPTION

52mm Tie down, SS Flush Mounted 89mm Tie down, SS Flush Mounted

Equipment Catalogue 2013/JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

167


6 ADREDCW H K AHRAER D W A R E

DECK FILLS

DECK PIPES | DECK PLATES | DECK PRISMS | PLUMBING

DECK FILLS

Cast 316 Stainless Steel Highly polished deck fills are precision machined and include an “O” ring seal to ensure water tightness. Includes stainless steel deck key. “Gas”, “Diesel”, and “Water” have 38mm cap with chain attachment. “Waste” has a 51mm cap with a 38mm hose size and no chain attachment

CODE

200150 200151 200152 200154 200155 200160 200161 200165 200169

TYPE MM

HOSE SIZE MM

CAP OD CAP: NPT MM PIPE SIZE MM

FLANGE DIA MM

SCREW SIZE

GAS

38

45

30

75

10

DIESEL

38

45

30

75

10

WASTE

38

45

30

75

10

WATER

38

45

30

75

10

SPARE CAP

38

GAS

50

50

38

88

10

DIESEL

50

50

38

88

10

SPARE CAP

50

SPARE KEY

DECK FILLS - MANSHIP Cast 316 Stainless Steel

Highly polished deck fills are precision machined and include an “O” ring seal. Angled deck fills provide a solution for those special installation requirements, where space is a factor. Includes stainless steel deck key.

CODE

TYPE MM

HOSE OD MM

CAP OD MM

FLANGE DIA MM

200200 200202 200204 200210 200212 200214 200215

DIESEL

38

45

76

WASTE

38

45

75

WATER

38

45

75

DIESEL

50

50

82

WASTE

50

50

82

WATER

50

50

82

DIESEL

50

50

82

DECK PLATES

Cast 316 Stainless Steel Flush surface mounting with “O” ring seal. Bronze available on indent. CODE

ID MM

DECK PLATE OD MM

CUT OUT MM

110608

76

115

85

110618

102

140

110

3” DECK PLATE BRASS CODE 110602

DESCRIPTION

3” Deck Plate brass

DECK PLATE & DECK FILL KEY Bent steel key. Accommodates most caps. CODE

MATERIAL

110639 GKS

Galv Steel

76-102

195

110639 GKL

Galv Steel

127-152

195`

168

SPAN WIDTH MM

OVER ALL LENGTH MM

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


6 ADREDCW H K AHRAER D W A R E

DECK PIPE - HINGED Cast 316 Stainless Steel

Highly polished. Opening allows large thimble to pass thru deck pipe and slot accommodates up to 10mm chain, remaining in place when cover is closed. Cover is hinged and spring loaded, eliminating rattle when in closed position. Cover slides and locks in an open position for convenient “hands free” feed of anchor rode. CODE

BASE SIZE MM

CUT-OUT SIZE MM

PIPE HOLE MM

110665

143 X 103

105 X 70

95 X 62

FENDER HOOK Chrome

Mount in convenient locations for hanging fenders. Hook will handle lines up to 9mm CODE

HEIGHT

WIDTH

SCREW SIZE

110711

38

32

8

FLAG POLE SOCKET 10 degrees from vertical. Fits all standard sized flag poles. CODE

MATERIAL

POLE SIZE MM

HEIGHT MM

BASE DIA

110732

Brass

26

45

67

110733

Chrome

26

45

67

110735

Chrome

32

51

70

110735B

Brass

HAND RAILS HANDRAIL - W/ FLANGE & STUD Stainless Steel

with welded Whitworth Studs CODE

LENGTH MM

STUD LENGTH MM

HEIGHT ABOVE DECK MM

110756

235

45

39

110758

310

45

39

110760

365

45

39

110762

465

51

39

HANDRAIL - W/ FLANGE & THREAD FOR BOLT Stainless Steel CODE

LENGTH MM

HEIGHT ABOVE DECK MM

110764

390

38

110765

645

38

110766

900

38

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

169


6 ADREDCW H K AHRAER D W A R E

HAWSE PIPES HAWSE PIPE OVAL Stainless Steel

Spigot is inserted into finish ring for smooth radius and can be trimmed to suit bulwark thickness. Finish ring is tapped for bolts (included). CODE

DESCRIPTION

OPENING

MAX FLANGE O.D.

BULWARK THICKNESS

111201

Stainless Hawse

36 x 92 mm

67 x 129 mm

50 mm Titan Gold available on request

HAWSE PIPE OVAL - WITH CLEATS

Bronze available on request.

Cast 316 Stainless Steel

Spigot is inserted into finish ring for smooth radius, and can be trimmed to suit bulwark thickness. Finish ring is tapped for through bolting. Includes 6mm flat-head bolts. CODE

DESCRIPTION

OPENING

MAX FLANGE O.D.

BULWARK THICKNESS

111213

Chrome Hawse with cleat

75 x 190 mm

133 x 244 mm

75 mm

HAWSE PIPE - TRIANGULAR CODE

HEIGHT

LENGTH

DEPTH

111220

48 mm

250 mm

125mm

LATCHES LATCH SPRING SIDE 316 Stainless Steel

Spring loaded slide catch can be mounted in 12 - 25 mm thick doors. Designed for acrylic doors using a simple cut out for installation CODE

WIDTH

LENGTH

DEPTH

111260

54

93

12

LATCH SPRING TRANSOM DOOR 316 Stainless Steel

This product features a spring loaded adjustable length. SS slide satisfies many requirements found on marine door installations. Modern attractive design. Comes with strike plate. CODE

WIDTH

LENGTH

DEPTH

111265

51

122

20

LIFT HANDLE - TURNING LOCK - RECTANGULAR Brass or Stainless Steel

Flush mount handle lifts and rotates on SS roll pin. “O” ring seal in mechanism assures leak-free operation. Locking arm has height adjustment that is secured with SS set screw. CODE

CODE SS

BASE SIZE MM

HEIGHT

LOCKING ADJUSTMENT

111270 111275

111271 111277

67X79 76X95

111 136

38X86 35X117

170

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


6 ADREDCW H K AHRAER D W A R E

LIFT HANDLE - TURNING LOCK 316 Stainless Steel

Spring-loaded handle for anti-rattle operation. Locking option available, reversible stamped latch pawl included. 116655 fasteners are hidden CODE

MODEL WITH OR WITHOUT LOCK

FACE MM

HEIGHT MAX MM

HEIGHT MIN MM

111280 111281

No With

63 x 76 63 x 76

76 76

38 38

LATCH - SLAM 316 Cast Stainless Steel

Investment cast 316 SS. Operated by lift handle to open, spring loaded latch engages striker plate on closing. Flush mounting, highly polished, with or without lock. CODE

MODEL WITH OR WITHOUT LOCK

HEIGHT MM

HOLE DIA MM

WIDTH MM

111250 111251

Without With

10 10

50 50

63 63

NON-LOCKING LIFT RING SINGLE CAM CODE 116655

DESCRIPTION

Non-locking lift ring single cam

NON-LOCKING LIFT RING CODE 116650

DESCRIPTION

Non-locking lift ring, with 4 mounting holes for 8 screws

MAST STEPS MAST STEP Aluminium - Folding

Step folds when not in use to extend only 32mm from mast. Rounded design eliminates chance of halyards fouling with step in closed position. Step has full 127mm tread width. Nylon adjusting screw eliminates rattling when step is in folded position. CODE

HEIGHT FOLDED MM

BASE WIDTH MM

BOLT SIZE MM

DISTANCE FROM MAST

111314

152

68

6.35

32

PAD EYES PAD EYE - DIAMOND Cast 316 Stainless Steel Bronze also available CODE LENGTH MM 111332 111336

79 89

WIDTH MM

EYE OD MM

SAFE WORKING LOAD

SCREW SIZE MM

51 57

20X11 22X13

907 1360

6 24

Equipment Catalogue 2013/JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

171


6 ADREDCW H K AHRAER D W A R E

ROD HOLDERS SS ROD HOLDER CODE 111425

DESCRIPTION

44mm rectangular flange 30° , liner w/ cap, sheet SS,

ROD HOLDER, SPOT WELDED CODE 111441

DESCRIPTION

44mm MD Rod Holder, spot welded, c/w liner

ROD HOLDER - HEAVY DUTY - ANGULAR Stainless Steel

Flush mounted cast stainless steel flange fully welded to tube, with black PVC end cap and liner. Suitable for up to 80 lb line class. Pin for rod alignment 30° angle at base. CODE

LINER ID MM

INTRUSION DEPTH MM

BASE SIZE CC

MOUNT SCREWS

111435

44

247

106X85

6

ROD HOLDER - HEAVY DUTY - 30° Stainless Steel

Flush mounted cast stainless steel rectangular flange fully welded to tube, with black PVC end cap and liner. Suitable for up to 80 lb line class. Pin for rod alignment 30° angle at base CODE

LINER ID MM

INTRUSION DEPTH MM

BASE SIZE CC

MOUNT SCREWS

111440

44

247

112X82

6

NEOPRENE LINER FOR ROD HOLDER, BLACK CODE 111427

DESCRIPTION

Neoprene liner for rod holder, H 220mm

ROD HOLDER - HEAVY DUTY - 90° Cast Stainless Steel Bolt through CODE

LINER ID MM

LENGTH MM

FLANGE SIZE MM

BOLT SIZE

111450

38

229

86x106

6

ROD HOLDER - CLAMP-ON Cast Stainless Steel

Polished Stainless Steel tube, hard plastic liner, 316 SS clamp CODE

LINER ID MM

LENGTH MM

111455

41

229

172

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


6 ADREDCW H K AHRAER D W A R E

Bronze T - Track End Stop Bolt through CODE

TRACK SIZE MM

HEIGHT MM

WIDTH MM

BOLT SIZE

111540

32

13

32

8

TEAK BLOCK SINGLE CODE 111502

DESCRIPTION

16mm Teak block, single 13mm Teak block, single w/ becket

111503

SCUPPERS CAST ALLOY SCUPPER CODE 111600

DESCRIPTION

Scupper, cast alloy 167 x 112mm Scupper, cast alloy 237 x 146mm

111602

THESE SCUPPERS ARE FROM THE ORIGINAL MANUFACTURER - NOT CHEAP KNOCK-OFFS

VENTS VENT - BUTTERFLY Stamped 304 Stainless Steel

These round vents are ideal for lockers and cabinets. The twist knob on the top allows the vent opening to be adjusted from fully closed to fully open. Pre drilled for easy installation. CODE

KNOB POSITION

OD MM

ID MM

111642

Centre

126

117

VENT - MINI CLAM Stainless Steel

Mini clam shell vent made from pressed stainless steel. Ideal for covering anchor well drains and through transom wiring etc. CODE

LENGTH MM

WIDTH MM

HEIGHT MM

111650

41

44

12

VENT CLAM SS COMPACT CODE 111652

DESCRIPTION

Vent Clam SS compact 14

Equipment Catalogue 2013/JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

173


6 ADREDCW H K AHRAER D W A R E

VENT - ROUND COWL

Precision Cast 316 Stainless Steel Highly polished Precision Cast 316 stainless steel. Vents are finished inside with a white powder coating. All deck plates have an “O” ring seal. SS cowl vents have a chrome plated bronze deck plate and include cover and key. Code SS 111696

Deck Plate I.D mm

Flange O.D mm

Height Min mm

Scoop Width mm

126

216

362

262

VENT - TEAR DROP COWL Stainless Steel-Chrome Plated

18-8 non magnetic stainless steel. Hand polished and electro polished chrome plating to protect against corrosion. Low profile with tear drop opening to enable maximum air to enter the dorade box. Includes SS deck plate with “O” ring. CODE SS 111740 111741 111742

DECK PLATE I.D MM

FLANGE O.D MM

FLANGE MM

HEIGHT MM

SCOOP WIDTH MM

76 102 127

90 112 150

127 160 200

267 346 400

185 180 190

VENTS - FUEL TANK 316 Stainless Steel

Ideal vents for fuel tanks. Available in straight or 90° models. Each has two holes with mesh screens (SS) and accommodates hulls up to 12mm thick. For use with 16mm I.D. hose CODE

STYLE

LENGTH

HEAD DIA

200390 200391

STRAIGHT 90°

64 64

24 24

VENTS - FUEL TANK 316 Stainless Steel

Recessed cup head permits flush mounting to hull or coaming. For hull thickness up to 33mm (38mm for 19mm) CODE

A MM

B MM

C MM

D MM

E-MAX MM

200396 200397

16 19

75 75

38 38

49 49

33 38

174

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


6 ADREDCW H K AHRAER D W A R E

VENT - LOUVRED Stainless Steel

Pressed and polished stainless steel. Low profile raised louvres. CODE

LENGTH MM

WIDTH MM

THICKNESS MM

LOUVRES #

65 127

127 227

0.8 0.8

3 14

111760 111764

VENT - LOUVRED Stainless Steel

Raised flat top. Ideal for engine compartments CODE

LENGTH MM

WIDTH MM

DEPTH MM

LOUVRES #

327

111

25

5

111773

THRU HULLS TRANSOM EXHAUST - THRU HULL 316 Stainless Steel

Highly polished heli-arc welded 316 - SS. Electro polished to assure maximum protection against corrosion. Available in a wide range of sizes. CODE

SIZE

BARB SIZE MM

FLANGE OD MM

HEIGHT MM

PIPE ID MM

200370 200372 200374

SMALL MED LARGE

48 64 76

92 104 120

130 130 71

45 60 71

EDSON HARDWARE ANTENNA STANDOFF, SS CODE 535-3-125

DESCRIPTION

Antenna Standoff, 3” SS Antenna Standoff, 5” SS Antenna Standoff, 7” SS

535-5-125 535-7-125

878ST-1

878ST-2

Drink Holders Built from high quality materials, Edson’s attention to detail make these holders functional, strong and look great on any boat. Cast from solid marine grade 316 stainless

878ST-3 Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

175


6 ADREDCW H K AHRAER D W A R E

PLASTIC DECK HARDWARE DURABLE PLASTIC DECK HARDWARE - BLACK AND WHITE

SNAP APART HINGES Easily remove hatches, engine covers, doors etc Fast access for cleaning or stowing. CODE WHITE SPA-20185WB

CODE BLACK SPA-20185KB

CLEATS Durable Plastic Cleats CODE WHITE

CODE BLACK

LENGTH MM

WIDTH MM

302483 302485

110 160

20 25

CODE BLACK

LENGTH MM

WIDTH MM

302487 302489

140 120

30 25

CODE BLACK

LENGTH MM

WIDTH MM

312454

90

20

302482 302484

CHOCKS Durable Plastic Chocks CODE WHITE 302486 302488

GRAB HANDLES Durable Plastic Grab Handles CODE WHITE 312453

NON SKID DECK PLATES Plastic stern plate TYPE A B

CODE WHITE 312448 -

CODE BLACK

LENGTH MM

WIDTH MM

312450

270 200

100 80

(b) (a)

MOUNT BRACKETS Plastic outboard bracket CODE

SPA-20150

176

MAX OUTBOARD SIZE 8HP

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


6 ADREDCW H K AHRAER D W A R E

STORAGE CASES

160

135

Medium flush mounted Code 302421

180 235

Description

150

180

Corner Flush Mounted without door 100

110

110

78

PLASTIC HINGES DURABLE NYLON HINGES IN BLACK OR WHITE

LONG FLAT HINGE CODE WHITE

CODE BLACK

LENGTH MM

WIDTH MM

HEIGHT MM

302755

200

35

4

LENGTH MM

WIDTH MM

HEIGHT MM

OFFSET MM

100

60

5

10

302754

CUPBOARD HINGE CODE WHITE 302760

HEAVY DUTY PLASTIC HINGES CODE BLACK

A MM

B MM

C MM

D MM

E MM

F MM

G MM

H MM

D MM

302763

98

97.9

63

60

21

35

25

37

10.5

PLUMBING FITTINGS FUEL DECK FILLS D

Fuel deck filler with cap CODE WHITE

H MM

D MM

DI MM

d MM

222109

64

84

42

55

H di d

WATER DECK FILLS D

Water deck filler with cap CODE WHITE

H MM

D MM

DI MM

d MM

222111

64

84

34

38

D1 MM

H

di

d d1 Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

177


6 ADREDCW H K AHRAER D W A R E

DECK FILLER CAPS CODE 222113 222114 222115 222116

COLOUR

DESCRIPTION

Red Green Orange Blue

Diesel Fuel Fuel Water

TANK VENTS - OVAL Oval tank vents - Straight or angled 90 degrees CODE

CODE ANGLED

SIZE MM

322346

16

322345

Oval

Oval 90o

TANK VENTS - ROUND Flat tank vents - Straight or angled 90 degrees CODE

CODE ANGLED

SIZE MM

322348

16

322347

Flat

Flat 90o

THRU-HULLS - WITH SS TRIM PLATE Nylon

Through Hull Drain, for thin hull sections up to 16mm. Body is Nylon 66+30, Glass trim cover is 316 SS plate CODE BLACK

A MM

B MM

C MM

D MM

E MM

202343 202346 202347

19 32 38

48 60 60

87 103 103

35 41 41

29 32 32

THRU HULL SKIN FITTINGS Drain Socket CODE WHITE

CODE BLACK

H MM

D MM

d MM

d1 MM

dp MM

F in

202350 202352 202354 202356 202358

202351 202353 202355 202357 202359

75 83 94 102 102

43 51 62 76 76

10 13 18 24 30

16 18 24 35 35

15 18 25 30 40

/8 /4 1 11/4 11/4

5 3

THRU HULL SKIN FITTINGS Drain Socket CODE WHITE

CODE BLACK

H MM

D MM

d MM

dp MM

P MM

F in

202365

202366

100

42

25

30

25

33

CODE WHITE

CODE BLACK

H MM

D MM

d MM

F MM

202369

202370

155

39

25

33

178

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


4000 Series

So-Pac hatches are UV resistant so won’t yellow like those made from inferior plastics. Extra Strong Latch Mechanism

Lock security Lock&and Security options Optionson large hatches

UV resistant ASA plastic - won’t yellow*

made

right

here New Zealand Approved

3 sizes in white or grey

• Easy to install & maintain • Create a storage locker anywhere!

Weather tight gasket seal

Strong 180° opening hinges

Strong, user friendly handles

Reinforced lid with non-skid surface


HATCHES & PORTLIGHTS

SOPAC PLASTIC ACCESS HATCHES UV RESISTANT ASA PLASTIC LOW PROFILE FLUSH FITTING REINFORCED LID. NON SKID SURFACE SUPPORT NORMAL CREW TRAFFIC EASY TO INSTALL

USE FOR: STORAGE LOCKERS INSPECTION HATCHES ANCHOR LOCKERS COCKPIT FLOOR STORAGE

4000 SERIES ACCESS HATCHES 180° Opening

The hinges on our 4000 Series Hatches open 180º, the lid completely covers the mounting flange, concealing the fastenings and deflecting water away from the hatch seal. The seal ensures weatherproofing when the hatch is mounted on horizontal and vertical surfaces. Contoured handles provide a positive twist lock action and easy lift grip (even with gloves). Low profile (13mm above deck), injection moulded UV stable plastic hatches designed for installation on any internal or external flat surface. Reinforced lid with non skid surface. Intrusion below deck 18mm. Screw holes are 5mm countersunk. Available in a choice of white or grey, with or without key security lock. CE Approved.

ies CODE WHITE

CODE GREY

t so won’t ferior plastics. SPA-40105 SPA-40155 SPA-40205 SPA-40205L

SPA-40106 SPA-40156 SPA-40206 SPA-40206L

CODE DARK GREY

KEY LOCK

OUTSIDE FRAME MM

CLEAR OPENING MM

CUT OUT MM

SPA-40106-DG SPA-40156-DG SPA-40206-DG SPA-40206-DGL

NO NO NO YES

375 X 285 395 X 335 595 X 355 595 X 355

292 X 192 312 X 242 512 X 262 512 X 262

305 X 205 325 X 255 525 X 275 525 X 275

ASA t yellow*

made

right

here

New Zealand

NEW COLOUR - DARK GREY 3000 SERIES ACCESS HATCHES Round 8”

Low-profile styling with screwhead covers. Positive latch with flip-up ring handle. Removable centre not hinged.

Approved CODE WHITE SPA-30308

180

CODE GREY

OUTSIDE FRAME MM

CLEAR OPENING MM

CUT OUT MM

SPA-30309

265

180

210

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


HATCHES & PORTLIGHTS

STAINLESS STEEL HATCHES COPIES OF MANSHIP’S CATALOGUE ARE AVAILABLE ON REQUEST. CUSTOM SIZES AND SHAPES ARE ALSO AVAILABLE ON SPECIAL ORDER.

HATCH - LOW PROFILE Rolled 316 Stainless Steel Frames with Acrylic Lens. Height of hatches is 32mm above deck Hand & electro polished. Comes with hatch arms and hinges Code Cut-Out Over All Size mm Acrylic Size mm Thickness mm M-LDH-08-I M-LDH-10-I M-LDH-20-I M-LDH-30-I M-LDH-40-I M-LDH-50-I M-LDH-60-I M-LDH-70-I M-LDH-30-O M-LDH-40-O M-LDH-50-O M-LDH-60-O M-LDH-70-O

INSIDE OPENING 206 x 349 270 x 413 254 x 254 318 x 318 318 x 444 382 x 508 369 x 495 433 x 559 419 x 419 483 x 483 495 x 495 559 x 559 610 x 610 674 x 674 788 x 788 852 x 852 IN/OUTSIDE OPENING 369 x 495 433 x 559 419 x 419 483 x 483 495 x 495 559 x 559 610 x 610 674 x 674 788 x 788 852 x 852

12 12 12 12 12 12 12 12 12 12 12 12 12

HATCH LOW PROFILE DOUBLE OPENING Rolled 316 Stainless Steel Frames with Acrylic Lens Height of hatches is 32mm above deck Hand & electro polished. Comes with hatch arms and hinges Code M-LDH-50-D M-LDH-60-D M-LDH-70-D

Size

Cut-Out Size mm

Over All Size mm

Acrylic Thickness mm

495 x 495 610 x 610 788 x 788

495 x 495 610 x 610 788 x 788

559 x 559 674 x 674 852 x 852

12 12 12

HATCH - STANDARD DECK Rolled 316 Stainless Steel Frames with Acrylic Lens Height of hatches is 47mm above deck Hand & electro polished. Comes with hatch arms and hinges Code

M-DH-08-I M-DH-10-I M-DH-20-I M-DH-30-I M-DH-40-I M-DH-50-I M-DH-60-I M-DH-70-I M-DH-30-O M-DH-40-O M-DH-50-O M-DH-60-O M-DH-70-O

Cut-Out Size mm

Over All Size mm

INSIDE OPENING 206 x 349 270 x 413 254 x 254 318 x 318 318 x 444 382 x 508 369 x 495 433 x 559 419 x 419 483 x 483 495 x 495 559 x 559 610 x 610 674 x 674 788 x 788 852 x 852 IN/OUTSIDE OPENING 369 x 495 433 x 559 419 x 419 483 x 483 495 x 495 559 x 559 610 x 610 674 x 674 788 x 788 852 x 852

Acrylic Thickness mm 8 8 12 12 12 12 12 12 12 12 12 12 12

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

181


HATCHES & PORTLIGHTS

HATCH Rolled 316 Stainless Steel Frames Hand & electro polished. Comes with hatch arms and hinges Code

M-DH-50-D M-DH-60-D M-DH-70-D

Size

495 x 495 610 x 610 788 x 788

Cut-Out Size mm

Over All Size mm

Acrylic Thickness mm

DOUBLE OPENING 495 x 495 559 x 559 610 x 610 674 x 674 788 x 788 852 x 852

12 12 12

HATCH - ROUND Rolled 316 Stainless Steel Frames Hand & electro polished. Comes with hatch arms and hinges Code

Size

M-DHR-50-I M-DHR-60-I

495 610

M-DHR-50-O M-DHR-60-O

495 610

Cut-Out Size mm

Over All Size mm

INSIDE OPENING 495 610 IN/OUTSIDE OPENING 495 610

Acrylic Thickness mm

559 674

12 12

559 674

12 12

STAINLESS STEEL PORTS SHOWN ARE EXAMPLES OF THE MOST COMMON SHAPES AND SIZES OF PORTLIGHTS SUPPLIED TO DATE. OVER 400 STANDARD SHAPES AND SIZES ARE AVAILABLE. CUSTOM SIZES AND SHAPES WITH OR WITHOUT DEADLIGHT COVERS ARE ALSO AVAILABLE.

PORTS - FIXED RECTANGLE Machine Rolled 316 S/S Code M-FLS-0512 M-FLS-0714 M-FLS-0716 M-FLS-0718 M-FLS-0816 M-FLS-0818

Glass Size 127 x 305 178 x 356 178 x 406 178 x 457 203 x 406 203 x 457

Cut-Out Size mm

Over All Size mm

133 x 307 184 x 362 184 x 413 184 x 464 210 x 413 210 x 464

193 x 368 244 x 424 244 x 473 244 x 524 269 x 473 269 x 524

PORTS - OPENING RECTANGLE Machine Rolled 316 S/S Code w/out Cover M-LS-0512 M-LS-0714 M-LS-0716 M-LS-0718 M-LS-0816 M-LS-0818

Code w/ Cover

M-CLS-0716 M-CLS-0718 M-CLS-0816 M-CLS-0818

Glass Size mm 127 x 305 178 x 356 178 x 406 178 x 457 203 x 406 203 x 457

Cut-Out Size mm 133 x 307 184 x 362 184 x 413 184 x 464 210 x 413 210 x 464

Over All Size mm 193 x 368 244 x 422 244 x 473 244 x 524 269 x 473 269 x 524

PORTS - FIXED OVAL Machine Rolled 316 S/S Code M-FLSO-0512 M-FLSO-0714 M-FLSO-0716 M-FLSO-0718 M-FLSO-0816 M-FLSO-0818

182

Glass Size mm 127 x 305 178 x 356 178 x 406 178 x 457 203 x 406 203 x 457

Cut-Out Size mm 133 x 307 184 x 362 184 x 413 184 x 464 210 x 413 210 x 464

Over All Size mm 193 x 368 244 x 424 244 x 473 244 x 524 269 x 473 269 x 524 Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


HATCHES & PORTLIGHTS

PORTS - OPENING OVAL Machine Rolled 316 S/S Code w/out Cover M-LSO-0512 M-LSO-0714 M-LSO-0716 M-LSO-0718 M-LSO-0816 M-LSO-0818

Code w/ Cover

Glass Size mm

Cut-Out Size mm

Over All Size mm

M-CLSO-0716 M-CLSO-0718 M-CLSO-0816 M-CLSO-0818

127 x 305 178 x 356 178 x 406 178 x 457 203 x 406 203 x 457

133 x 307 184 x 362 184 x 413 184 x 464 210 x 413 210 x 464

193 x 368 244 x 422 244 x 473 244 x 524 269 x 473 269 x 524 Pictured with storm cover - optional extra

PORTS - FIXED ROUND Machine Rolled 316 S/S Code M-FLSR-0500 M-FLSR-0600 M-FLSR-0700 M-FLSR-0800 M-FLS-0816 M-FLSR-1000

Dia. mm

Cut-Out Size mm

Over All Size mm

127 152 178 203 203 x 406 254

133 158 184 210 210 x 413 254

193 218 244 269 269 x 473 327

PORTS - OPENING ROUND Machine Rolled 316 S/S Code w/out Cover M-LSR-0715 M-LSR-0815 M-LSR-1015 M-LSR-1215 M-LSO-0816 M-LSR-1415

Code w/ Cover

M-CLSR-1015 M-CLSR-1215 M-CLSO-0816 M-CLSR-1415

Glass Size mm 178 203 254 305 203 x 406 356

Cut-Out Size mm 184 210 262 311 210 x 413 362

Over All Size mm 244 269 327 378 269 x 473 429

PORTS - FIXED ELLIPTICAL Machine Stamped 316 S/S Code M-FE0718

Size. mm 178 x 451

Cut-Out Size mm 188 x 458

Over All Size mm 244 x 518

PORTS - OPENING ELLIPTICAL Machine Rolled 316 S/S

Code M-LE-0718

Size. mm 178 x 451

Cut-Out Size mm 187 x 458

Over All Size mm 244 x 518

Equipment Catalogue 2013/JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

Pictured with storm cover - optional extra

183


HATCHES & PORTLIGHTS

2400 SERIES CAST HATCHES FREEMAN MARINE’S patented 2400 Series Cast Aluminium Hatches are available in a variety of sizes and shapes. Standard models have a cast aluminium cover, aluminium dogging mechanism and your choice of cast aluminium, steel, galvanized steel or stainless steel rings. FREEMAN MARINE’S uniformly spaced dogs are superior to the ‘yoke” or “strongback’ type seal mechanisms which cause inherent cover distortion and sealing problems. FREEMAN 2400 Series Cast Hatches feature a stainless steel handle and round bar shaft for trouble free operation. Ductile iron covers with 316 stainless steel dogging mechanisms are available in three sizes (18” Round, 24” Round, 15” X 24” Oval), and your choice of steel, galvanized steel or stainless steel deck ring. • Top Value A FREEMAN Cast Deck Hatch is the best buy for every flush hatch application. Measure it against any other deck hatch for long life of materials, strength of design, precision fit, smooth action, dependable mechanism, and built-in, never-lost handle. • Approvals Lloyd’s Register - type approval certificate number 3/00088. U.S. Coast Guard, CE, ISO-12216 compliant. ABS, Bureau Veritas and Germanischer Lloyd’s approvals have been awarded and may be obtained for specific intended uses. Freeman Cast Deck Hatches are currently in use on Coast Guard vessels and U.S. Naval craft of all types. • Value Added Yacht-quality linear polyurethane, and anodized finishes available. • Fast Acting Lift the flush handle, make a quarter turn and lift. That’s all it takes. The dogging mechanism and linked handle do the work smoothly in just a second. • Positive Dogging Evenly spaced dogging arms (either 3, 4 or 8 per hatch) exert uniform pull on the cover plate. Handle position shows when dogging arms are engaged or loose. • Unlocking Simply grasp the handle and pull, the shaft slides up into place, and with less than a quarter of a turn the locking mechanism completely disengages. It’s a matter of one or two seconds. • Handle Stays Put The handle is built in - permanently part of the hatch so it’s right where you need it every time. Can’t get lost. • Hatch Sealed Hatch and handle fit flush with the deck, the handle in recessed lock position. Say goodbye to lost cover wrenches - the FREEMAN Cast Hatch handle is always there when you need it. • Unique Developed and manufactured under various patents by FREEMAN MARINE. • Easy Lift With the locking mechanism disengaged, the hatch is merely resting on the deck ring and can be lifted out with one hand. Closing is just as quick and easy. Optional inside escape handle performs the same easy way with a push and turn from below. • Watertight Designed to seal to 30-foot intermittent head, the double-sealing gasket actually seals tighter under pressure. • Versatile Installs in steel, aluminium, wood or fibreglass decks. Complete unit includes aluminium or steel mounting ring for bolting or welding installations. • Reliable The unique design, fit, finish and adjustability of the dogging mechanism assures smooth, consistent action - no binding or jamming of parts. This hatch, adjusted to proper tensions, can’t be over or under tightened by mistake. It operates the same each time. • Low Maintenance All parts are made of superior materials designed especially for marine and other abusive environments. The hatch and most parts are corrosion resistant aluminium. All other components are stainless steel, acetal or compatible.

184

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


HATCHES & PORTLIGHTS

Hatch Model 2400 Series, hold open, cast cover

Hatch Model 2400 Series, spring adjustment foredeck

Compression Seal 2400 Series Hatches These have easy-to-clean spigots, feature long gasket life, and cost less than the knife Edge Seals. Aluminium Deck Rings are intended to be weld installed into aluminium decks and bolt installed into other deck materials. Steel Deck Rings are to be weld installed into steel decks only. Watertight seal intermittent to 30 foot head, continuous 10 foot head top-loaded pressure (on properly installed and adjusted hatch assemblies). Specify any special performance criteria and/or certification requirements at time of order.

Knife Edge Seal 2400 Series Hatches

These feature a coaming with drain gutter and an aggressive sealing rim edge. A drain fitting can be installed to minimize water from entering enclosure when hatch is initially opened. Aluminium Deck Rings are intended to be weld installed into aluminium decks and bolt installed into other deck materials. Steel Deck Rings are to be weld installed into steel decks only. Specify any special performance criteria and/or certification requirements at time of order.

2400 SERIES HATCHES - TYPES For sizing, and ordering information, see following pages.

Round Hatches Flush Sizes are 8″, 12″, 15″, 18″, 20″, 22″, 24″ and 30″

Rectangular Hatch Flush Size is 18 x 24″

Oval Hatches Flush Sizes are 12 x 18″, 15 x 24″ and 19 x 26″

Square Hatches Flush Sizes are 18″, 20″, 22″, 24″, 30″ and 36″

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

185


HATCHES & PORTLIGHTS

FREEMAN ROUND CAST HATCHES - FLUSH A-K

S-K

C E

B A

B A

E Ring O.D.

D

D

Rough Opening

F

Rough Opening & Ring O.D.

F C

Clear Opening

Clear Opening

Aluminium Deck Ring, Compression Seal

Steel Deck Ring, Compression Seal

A-C

S-C

C E

B A

B

E

Ring O.D. D

A

D

Rough Opening

Rough Opening & Ring O.D.

Clear Opening

Clear Opening

Aluminium Deck Ring, Compression Seal

Steel Deck Ring, Compression Seal

Opening Dimensions (mm)

Code

F-2401-0002 F-2402-0002 F-2402-0003 F-2403-0002 F-2403-0003 F-2404-0002 F-2404-0003 F-2405-0002 F-2405-0003 F-2441-0002 F-2441-0003 F-2442-0002 F-2442-0003 F-2481-0107 F-2406-0002 F-2406-0003 F-2407-0002 F-2407-0003 F-2443-0002 F-2443-0003 F-2444-0002 F-2444-0003 F-2408-0002 F-2408-0003 F-2411-0002 F-2411-0003 F-2412-0002 F-2412-0003 F-2447-0002 F-2447-0003 F-2448-0002 F-2448-0003 F-2482-0107 F-2415-0006 F-2415-0007 F-2452-0006 F-2452-0007

186

Clear Opening

Rough Opening

Overall

Cover (mm) Material

Thickness

Overall

Std. Material

Dog Qty

Weight (KG)

7.8

Alum.

5.8

249

Alum

3

3.6

33

7.8

Alum

4.8

353

Alum

3

5.9

33

6.4

Alum

4.8

353

Alum

3

7.3

33

7.8

Alum

7.4

432

Alum

3

10.4

Size

Style

Ring

A

B

C

D

E

8″

Lift-out

A-C

201

262

300

25

12″

Lift-out

A-C

302

376

442

12″

Lift-out

S-C

302

368

15″

Lift-out

A-C

381

452

15″

Lift-out

S-C

381

447

18″

Lift-out

A-C

457

531

18″

Lift-out

S-C

457

521

18″

Lift-out

A-K

457

508

546

Mechanism

F

33

6.4

Alum

7.4

432

Alum

3

11.8

622

36

7.8

Alum

6.6

508

Alum

3

13.6

33

6.4

Alum

6.6

508

610

38

9.6

20

Alum

6.1

64

7.8

25

Alum

6.1

41

6.9

Alum

9.7

508

33

6.4

Alum

9.7

508

38

9.6

20

Alum

6.1

25

Alum

3

14.5

Alum

3

17.2

Alum

3

16.3

Alum

3

15.9

18″

Lift-out

S-K

457

523

18″

Hinged

A-C

457

531

18″

Hinged

S-C

457

528

18″

Hinged

A-K

457

508

18″

Hinged

S-K

457

523

64

7.8

Alum

6.1

18″

Lift-out

S-C

457

521

38

6.4

Ductile Iron

10.4

505

20″

Lift-out

A-C

503

579

673

33

7.8

Alum

6.6

556

Alum

20″

Lift-out

S-C

503

569

33

6.4

Alum

6.6

556

20″

Lift-out

A-K

508

559

660

36

9.7

18

Alum

9.0

64

7.9

25

Alum

9.0

43

10.2

Alum

7.4

556

33

6.4

Alum

7.4

556

36

9.7

Alum

9.0

64

7.9

Alum

9.0

41

7.9

Alum

7.9

38

6.4

Alum

36

7.9

38

6.4

41

610 610

4

18.6

Alum

4

20.0

Alum

4

21.3

Alum

4

20.4

Alum

4

21.8

610

Alum

4

17.7

7.9

610

Alum

4

18.1

Alum

9.4

655

Alum

4

23.6

Alum

9.4

655

Alum

4

24.5

9.7

Alum

10.7

Alum

4

29.5

64

7.9

Alum

10.7

Alum

4

28.8

43

10.2

Alum

10.4

655

Alum

4

28.8

38

6.4

655

41

9.7

18 25

574

498

579

20″

Hinged

S-C

498

567

20″

Hinged

A-K

508

559

20″

Hinged

S-K

508

574

22″

Lift-out

A-C

559

630

22″

Lift-out

S-C

559

625

24″

Lift-out

A-C

592

676

24″

Lift-out

S-C

592

673

24″

Lift-out

A-K

612

663

24″

Lift-out

S-K

612

678

24″

Hinged

A-K

594

671

24″

Hinged

S-C

594

676

24″

Hinged

A-K

612

673

24″

Hinged

S-K

612

678

64

7.9

24″

Lift-out

S-C

592

676

38

6.4

30″

Lift-out

A-C

762

851

36

7.9

30″

Lift-out

S-C

762

846

33

6.4

30″

Hinged

A-C

762

851

43

30″

Hinged

S-C

762

846

38

947 947

16.3

Alum

508

777

34

4

16.8

S-K

775

19.1

3

20.0

A-C

777

3

4

Lift-out

775

Alum S/Steel

4

Hinged

724

17.2 17.7

Alum

20″

660

3 3

Alum

20″

673

Alum Alum

Alum

10.4

Alum

10.7

Alum

4

28.1

Alum

4

29.9

Alum

10.7

Ductile Iron

9.1

655

Alum

4

29.5

S/Steel

4

49.9

Alum

10.4

826

Alum

9.9

826

S/Steel

4

36.7

S/Steel

4

10.2

Alum

11.7

39.5

826

S/Steel

4

37.2

6.4

Alum

12.4

826

S/Steel

4

53.5

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


HATCHES & PORTLIGHTS

FREEMAN OVAL CAST HATCHES FLUSH A-K

S-K

C E

B A

B A

E Ring O.D.

D

D

Rough Opening

F

Rough Opening & Ring O.D.

F C

Clear Opening

Clear Opening

Aluminium Deck Ring, Compression Seal

Aluminium Deck Ring, Compression Seal

A-C

S-C

C E

B A

B

E

Ring O.D. D

A

D

Rough Opening

Rough Opening & Ring O.D.

Clear Opening

Aluminium Deck Ring, Compression Seal

Clear Opening

Aluminium Deck Ring, Compression Seal

Opening Dimensions (mm) Clear Opening

Rough Opening

Overall

Cover (mm) Material

Thickness

Overall

Std. Material

Dog Qty

Weight (KG)

7.8

Alum.

7.1

358x516

Alum

4

13.2

6.4

Alum

358x516

Alum

4

13.6

38

7.8

Alum

358x516

Alum

4

14.1

33

6.4

Alum

358x516

Alum

4

14.1

38

6.4

Alum

414x658

Alum

4

15.9

33

6.4

Alum

414x658

Alum

4

16.8

533x762

41

7.8

15.2

Alum

4

15.9

64

7.8

6.4

549x775

38

7.8

33

6.4

41

7.8

15.2

Alum

64

7.8

6.4

Alum

Size

Style

Ring

A

B

C

D

E

F-2431-0002

12x18″

Lift-out

A-C

305x457

381x533

478x630

38

F-2431-0003

12x18″

Lift-out

S-C

305x457

376x503

33

F-2471-0002

12x18″

Hinged

A-C

305x457

381x533

F-2431-0003

12x18″

Hinged

S-C

305x457

376x523

F-2433-0002

15x24″

Lift-out

A-C

371x594

447x676

F-2433-0003

15x24″

Lift-out

S-C

371x594

441x673

F-2434-0002

15x24″

Lift-out

A-K

386x615

437x665

Code

F-2434-0003

15x24″

Lift-out

S-K

386x615

450x678

F-2473-0002

15x24″

Hinged

A-C

371x597

447x673

F-2473-0003

15x24″

Hinged

S-C

371x597

447x673

F-2474-0002

15x24″

Hinged

A-K

388x615

441x665

F-2474-0003

15x24″

Hinged

S-K

388x615

450x678

F-2483-0002

15x24″

Lift-out

S-C

376x605

445x673

F-2435-0002

19x26″

Lift-out

A-K

488x665

538x716

F-2435-0003

19x26″

Lift-out

S-K

488x665

551x729

F-2475-0002

19x26″

Hinged

A-K

488x665

538x716

F-2475-0003

19x26″

Hinged

S-K

488x665

551x729

Mechanism

478x630 541x770

533x762

635x813 635x813

F

Alum

Alum

4

24.5

Alum

Alum 414x658

Alum

4

16.8

Alum

414x658

Alum

4

17.2

Alum

4

15.9

Alum

4

27.2

38

6.4

S/Steel

4

28.6

41

7.8

15.2

Alum

Alum

4

19.5

64

7.8

6.4

Alum

Alum

4

27.7

41

7.8

15.2

Alum

Alum

4

20.0

64

7.8

6.4

Alum

Alum

4

30.0

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

Ductile Iron

428x650

187


HATCHES & PORTLIGHTS

FREEMAN RECTANGULAR CAST HATCHES - FLUSH A-K

A-K

C E

B A

B A

E Ring O.D.

D

D

Rough Opening

F

Rough Opening & Ring O.D.

F C

Clear Opening

Clear Opening

Aluminium Deck Ring, Compression Seal

Aluminium Deck Ring, Compression Seal

A-C

S-C

C E

B A

B

E

Ring O.D. D

A

D

Rough Opening

Rough Opening & Ring O.D.

Clear Opening

Aluminium Deck Ring, Compression Seal

Clear Opening

Aluminium Deck Ring, Compression Seal

Opening Dimensions (mm) Clear Opening

Rough Opening

Overall

Cover (mm)

Mechanism

Size

Style

Ring

A

B

C

D

E

F

Material

Thickness

Std. Material

Dog Qty

Weight (KG)

F-2421-0002

18x24″

Lift-out

A-K

457x610

521x673

622x775

41

9.7

18

Alum.

5.6

Alum

4

16.3

F-2421-0003

18x24″

Lift-out

S-K

457x610

521x673

521x673

64

7.9

23

Alum

5.6

Alum

4

27.7

F-2461-0002

18x24″

Hinged

A-K

457x610

521x673

622x775

41

9.7

18

Alum

5.6

Alum

4

16.3

Std. Material

Dog Qty

Weight (KG)

Code

FREEMAN SQUARE CAST HATCHES - FLUSH Opening Dimensions (mm) Clear Opening

Rough Opening

Overall

Cover (mm)

Mechanism

Size

Style

Ring

A

B

C

D

E

F

Material

F-2422-0002

20x20″

Lift-out

A-K

517x517

579x579

681x681

41

9.7

18

Alum.

Alum

4

19.5

F-2422-0003

20x20″

Lift-out

S-K

517x517

579x579

64

7.9

23

Alum

5.1

Alum

4

33.6

F-2462-0002

20x20″

Hinged

A-K

517x517

579x579

41

9.7

18

Alum

5.1

Alum

4

20.4

F-2462-0003

20x20″

Hinged

S-K

517x517

579x579

64

7.9

23

Alum

5.1

Alum

4

34.5

F-2463-0002

22x22″

Hinged

A-K

559x559

622x622

724x724

41

9.7

18

Alum

5.1

Alum

4

20.9

F-2423-0002

22x22″

Lift-out

A-K

559x559

622x622

724x724

41

9.7

18

Alum

5.1

Alum

4

20.4

F-2423-0003

22x22″

Lift-out

S-K

559x559

622x622

64

7.9

23

Alum

5.1

Alum

4

41.7

F-2463-0003

22x22″

Hinged

S-K

559x559

622x622

64

7.9

23

Alum

5.1

Alum

4

41.7

F-2424-0002

24x24″

Lift-out

A-K

622x622

686x686

41

9.7

18

Alum

7.1

Alum

4

25.9

F-2424-0003

24x24″

Lift-out

S-K

622x622

686x686

64

7.9

23

Alum

7.1

Alum

4

43.5

F-2464-0002

24x24″

Hinged

A-K

622x622

686x686

41

9.7

18

Alum

7.1

Alum

4

26.3

F-2464-0003

24x24″

Hinged

S-K

622x622

686x686

64

7.9

23

Alum

7.1

Alum

4

44.0

F-2426-0006

30x30″

Lift-out

A-K

762x762

826x826

41

9.7

18

Alum

6.4

S/Steel

4

31.0

F-2426-0006

30x30″

Lift-out

S-K

762x762

826x826

64

7.9

23

Alum

6.4

S/Steel

4

51.3

F-2466-0006

30x30″

Hinged

A-K

762x762

826x826

41

9.7

18

Alum

6.4

S/Steel

4

35.4

F-2466-0007

30x30″

Hinged

S-K

762x762

826x826

64

7.9

23

Alum

6.4

S/Steel

4

51.7

F-2428-0002

36x36″

Lift-out

A-K

914x914

998x998

64

7.9

23

Alum

9.7

Alum

8

48.0

F-2428-0003

36x36″

Lift-out

S-K

914x914

998x998

64

7.9

23

Alum

9.7

Alum

8

60.8

F-2468-0002

36x36″

Hinged

A-K

914x914

998x998

64

7.9

23

Alum

9.7

Alum

8

54.0

F-2468-0003

36x36″

Hinged

S-K

914x914

998x998

64

7.9

23

Alum

9.7

Alum

8

67.6

Code

188

681x681

787x787 787x787 927x927 927x927 1067x1067 1067x1067

Thickness

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


HATCHES & PORTLIGHTS

HATCH STAYS

MADE IN NEW ZEALAND

HATCH GAS STAYS

Stainless Steel Gas Springs

Code

To Fit Hatch Size mm

Hatch Weight kg

Force (normal use)

Open Length mm

Closed Length mm

GS-Kit 1

400 x 400 to 600 x 600

2-5

100 Nm

400

245

GS-Kit 2

600 x 600 to 800 x 800

5 - 15

100 Nm

545

325

GS-Kit 3

800 x 800 to 1000 x 1000

15 - 25

200 Nm

605

355

GS-Kit 4

1000 x 1000 to 1500 x 1500

25 - 35

300 Nm

695

375

CUSTOM SIZES AVAILABLE ON REQUEST, UP TO 1000 NM IS POSSIBLE

GREAT FOR LIFTING AND HOLDING OPEN SMALL TO USUAL SIZED HATCHES THEY ARE SOLD PRE-GASSED, THE GAS PRESSURE CAN BE INCREASED IF REQUIRED, NOT DECREASED MOUNTING BRACKETS ARE INCLUDED WITH EACH KIT

HATCH LIFTERS Hydraulic Hatch Lift Systems For Pleasure Boats. A system easily installed, the cylinders are made of polished aluminium with stainless steel piston rods Available in two sizes which in most cases will fit your boat: 18 Inch Stroke Single Cylinder 18 Inch Stroke Dual Cylinder 24 Inch Stroke Single Cylinder 24 Inch Stroke Dual Cylinder Lifting capacity of a single cylinder system is approximately 147.4 kg and dual cylinder is approximately 295 kg. The complete single cylinder system consists of: One hatch lifting cylinder 18” or 24” One motor pump with fittings and biodegradable oil and funnel. 10 feet hydraulic hose installed on cylinders Mounting pads installed with quick release pull ring Mounting hardware Single switch with plate 25 feet wire harness The complete dual cylinder system consists of: Two hatch lifting cylinders 18” or 24” Motor pump with fittings and biodegradable oil and funnel. 15 feet hydraulic hose installed on each cylinders Mounting pads installed with quick release pull ring Mounting hardware Single switch with plate 25 feet wire harness Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

189


190

Equipment Catalogue 2013 /JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


HVAC - HEATING & AIR CONDITIONING

HVAC - HEATING & AIR CONDITIONING

Sig Marine Products #407-204 Cayer St. Coquitlam B.C. Canada V3K 5B1 www.sigmarine.com info@sigmarine.com T: 800 659 9768

 Premium hand-crafted marine diesel heaters and stoves backed by an unprecedented  guarantee. Accessories available such as: • Thru-Deck • Circulation Fan • Draft Regulator • Pipe Guard • Pipes

Sig Marine makes a range of three stainless steel bulkhead diesel heaters and a single floor mounted version. The Sig-100 and 120 are compact light weight units with adjustable heat output between 1.2 and 3.0 kW, consuming just 0.34 litres per hour, suitable for boats sizes 8 to 12 meters. The Sig-170 and 180 have higher outputs between 1.5 and 3.8 kW suitable for yachts up to 16-18 meters, consuming 0.5 litres per hour. The Sig-180 floor model has the added advantage of also being hot water capable and like all the models in the range can run on diesel, kerosene or stove oil. Fuel supply is usually by a small 12 volt pump, but header tanks can also be used. All models include a tiny 12 volt fan to assist draft. Heat output is mostly radiated from the 75mm diameter SS flue pipe that vents exhaust gases through the cabin roof. Instruction Manual This manual must be read and the requirements carried out to ensure satisfactory performance. SIG MARINE RESERVES THE RIGHT TO MAKE CHANGES TO PRODUCTS OR DOCUMENTS AT ANY TIME

ASK FOR A SIGMAR CATALOGUE FOR MORE DETAILED PRODUCT INFO QUALITY INSPECTED BY-

Doug & Don

DATE- Nov 5/2008

SIGMAR 120

Sig Marine’s smallest bulkhead mount diesel heater. Provides a good source of heat for 22’ to 32’ sail boats or 22’ to 27 foot power craft. Code F00-100S

A bulkhead mounted diesel cabin heater is suitable for 22’ to 40’ sail boat or 22’ to 30’ power craft Code SS F00-120S Dimensions (mm)

Dimensions (mm)

SIGMAR 100

H 340 W 203 D 235 Pipe Size

Exhaust Length

W 203 D 235 Pipe Size

76

Exhaust Length

912

76 912

Air Intake 76

Air Intake 76 Fuel Consumption per 24 hours

H 483

Fuel Consumption per 24 hours

0.75-1.5 gal.

0.75-1.5 gal.

Max. BTU 12,000

Max. BTU 12,000

SIGMAR 170

SIGMAR 180

The large capacity bulkhead mount diesel heater will provide enough heat suitable for 22’ to 45’ sail boat or 22’ to 45’ power craft.

This attractive floor standing diesel cabin heater has a unique hinged bronze top with a small cooking surface. Suitable for 22’ to 45’ sail boat or 22, to 40’ power craft. With 2 large viewing windows

H 521 W 203 D 235 Pipe Size

Exhaust Length

76 1220

Air Intake 76 Fuel Consumption per 24 hours

1-2 gal.

Max. BTU 14,000 Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

Code F00-180S Dimensions (mm)

Dimensions (mm)

Code F00-170S

H 610 Diameter

254

Pipe Size

76

Exhaust Length

1220

Air Intake 76 Fuel Consumption per 24 hours

1-2 gal.

Max. BTU 14,000

191


HVAC - HEATING & AIR CONDITIONING

HEATER ACCESSORIES

Sig Marine Products #407-204 Cayer St. Coquitlam B.C. Canada V3K 5B1 www.sigmarine.com info@sigmarine.com T: 800 659 9768

 Image Code 

Name

Image

Code

Name

F03-01

3” RAIN CAP

F03-02

Deck fitting with dress ring

F03-05

Rain Lid

F03-15

H Cap

F00-20

12v Diesel Pump

F03-10

3” SS Pipe Guard 600mm (24”)

F00-21

3” SS Air Circulating Fan

F03-08

3” SS Flue Pip

F03-13

3” Draft Regulator

F03-09

3” Elbow 45°

F03-06

3” SS Air Intake Couplings

Instruction Manual This manual must be read and the requirements carried out to ensure satisfactory performance. SIG MARINE RESERVES THE RIGHT TO MAKE CHANGES TO PRODUCTS OR DOCUMENTS AT ANY TIME

QUALITY INSPECTED BY-

192

Doug & Don

DATE- Nov 5/2008

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


HVAC - HEATING & AIR CONDITIONING

HYDRONIC WATER HEATERS Hydronic System International Thermal Research (ITR) manufactures diesel powered “Hydronic” heater systems that circulate hot water in a closed loop to a series of small radiators located throughout the vessel. It begins with a furnace or boiler, usually fuelled by diesel, or electric elements that heat antifreeze fluid up to 82°C. A water pump circulates the antifreeze mixture via 19mm heater hose through a domestic water heat exchanger and then to the various radiator fan units located throughout the interior of the boat. These fan units have outlet plates that distribute warm air to direct cabin grills or ducting to remote cabins. Each radiator has a thermostat so you can have different temperatures in different areas of the boat. Fan units are available with outputs of 1.75 kW for smaller spaces up to 5.9 kW for windscreen demist and large volume cabins. A general rule of thumb suggests 2 kW for a 20 cubic meter main cabin in North Island winters, with more heat required further South. You can also use it to heat domestic water in the boat’s hot water cylinder. Heat output is almost immediate, producing a 17°C rise from ambient temperature increase at 4.0 litres per minute. The system can also be plumbed to incorporate engine waste heat adding an extra 1.0 to 1.5 kW to the output. The Hydronic system is a sealed system and it can be very easily installed as an aftermarket addition or for a new build due to the hose size used to circulate the water. Hydronic heating also delivers heat to the required space very evenly and there is less heat loss as the heat is transferred as a fluid and the heated fluid is easier to move around. In Summer, simply turn off the thermostats or switch valves to a “summer loop”. The ITR Hurricane diesel boiler differs from others by providing heat through a patented low pressure burner that provides high heat output but without the smell and smoke that is normally associated with diesel burners. Less pressure on the nozzle and a cleaner burner means less maintenance compared with high pressure burners. They are completely modular and field serviceable with easy diagnostics as well so they are serviceable at sea. ITR’s smallest system, SCH-25 (7.3kW output) is suitable for powerboats up to 14m (and larger yachts) consumes just 0.84 litres per hour. The Combi (10.3 kW) suits vessels up to 20m and the H2L (14.7kW output) can heat up to a 25m boat using 1.75 litres per hour. Models with 230VAC heating element can operate when the boat is connected to HYDRONIC HEAT ADVANTAGES Constant output of designed heat 12 volt system – no 230V required Sealed system – no seawater Heats domestic water on demand Service by owner – self diagnostic Serviceable at sea Engine waste heat can be used Preheat for cold starting engine.

DISADVANTAGES OF REVERSE CYCLE AIR As temperature outside decreases–output decreases 115V system requires generator Requires seawater (increased maintenance) Cannot heat potable water Cannot be serviced by owner – special tools & license Not serviceable at sea Cannot use engine waste heat No capability

HYDRONIC HEAT ADVANTAGES Comfort with warm air Heats domestic water – unlimited Easy installation – 3/4" tubing Service by owner – self diagnostic Serviceable at sea Engine waste heat can be used Preheat for cold starting engine Quiet operation Multiple heating zones

DISADVANTAGES OF DIESEL HOT AIR HEAT Very hot air, greater temperature swings Cannot heat potable water Difficult installation – 3" duct work (higher labour cost) Cannot be serviced by owner – special tools & license Not serviceable at sea No capability No capability Noise level high No ability to separate zones

HURRICANE HEATING SYSTEMS EXTEND YOUR SEASON AT BOTH ENDS

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

193


HVAC - HEATING & AIR CONDITIONING

HYDRONIC CABIN HEATERS HURRICANE SERIES TECHNICAL SPECIFICATIONS Code

ITR-SCH25 H2 H2 Combi H2L

Max. Heat Output

Dimensions (mm)

25,000 BTU 35,000 BTU 40,000 BTU 50,000 BTU

H

W

L

Weight (Kg) Empty/Full

228 330 356 356

330 330 406 356

482 571 584 762

19 / 26 26 / 44 32 / 48 39 / 71

Storage Capacity (Litres)

Coolant Connections

Exhaust Outlet mm

Fuel Consumption per hour

Power Usage (kW)

6.8 18 15 32

3/4” NPT 1/2" NPT 1/2” NPT 1" NPT

38 38 51 51

.84 L / Hour 1.26 L / Hour 1.5 L / Hour 1.74 L / Hour

7.3 10.3 11.8 14.7

HURRICANE II COMBI - NEW ALL-IN-ONE SPACE & DOMESTIC WATER HEATING SYSTEM Features • Patented no smoke, no smell diesel burner • Domestic water temperature rise from input of 26° C at 6 ltr/min • 5 thermostatically controlled space heating zones • A supplemental 1500W electric immersion element • Manual summer/winter switching valve • Domestic water temperature control valve THE HURRICANE COMBI INCLUDES: • Patented low pressure burner • Remote operating panel and cable • Hour meter for scheduled maintenance • Built in expansion tank and overflow bottle • Stainless burner, water jacket and case • Marine grade construction NOTES: • Heater designed to operate on 11 to 15.0 V.D.C. • Heater will operate efficiently on Diesel No. 1 or 2, Arctic diesel, kerosene, stove oil or furnace oil. • Power units (all models 6 amps) + circulting pump • The heater draws an extra 2 amps during start up (30 seconds) • Exhaust temperature under 300° C • All components accessible through front and top access panels. ®

• Patented no smoke, no smell burner • Marine-grade construction • 6-zone controls, including 4 space heating, a domestic water and an engine zone • Advanced electronics for safe and reliable operation • Simple design, easily maintained • Complete accessory package • Efficient, quiet and economical to operate TECHNICAL SPECIFICATIONS: Model

SCH-25

Maximum Heat Output Diesel Only

Coolant Connections

Exhaust Outlet

Tank Capacity

25,000 BTU/h 7.3 kW

3/4” 19mm hose barb

1.5” 38 mm

1.8 US gal 6.8 L

HEATER INCLUDES:

• Main control panel • Wiring harness & remote cable • Hour meter for scheduled maintenance • Remote Function Panel - full self diagnostics • 6 - zone controls: 4 space heating, 1 engine and 1 domestic hot water

Fuel Power Consumption Consumption

Dimensions HxWxD Weight (Empty/Full)

.22 US gal/h 0.84 L/h

9” X 13” X 19” 42 lbs / 57 lbs 228 X 330 X 482 mm 19 Kg / 26 Kg

5.5 Amps 66 Watts

NOTES:

• Heater is designed to operate on 11 to 15.0 V.D.C. • Heater will operate efficiently on Diesel No. 1 or 2, Arctic diesel, kerosene, stove oil or furnace oil. • Heater has electric ignition, which draws 2 amps for 30 seconds start up. • Heater case and water jacket is stainless steel. • Heater brings in 100% outside air for “sealed combustion.”

ITR-SCH25 - COMPACT

Due to our commitment for quality and on-going product improvement, ITR reserves the right to modify or change without notice, any materials, applications, equipment, accessories and/or prices. Measurements and weights is approximate.

194

ITR CANADA 2431 Simpson Road, Richmond, BC, Canada V6X 2R2 Tel: (604) 278-1272 Fax: (604) 278-1274 Toll free: 1-800-755-1272

E-mail: info@itrheat.com

ITR U.S.A. 4018 NE 112th Avenue, Suite D-3, Vancouver, Washington, U.S.A. 98682 Tel: (360) 993-4877 Fax: (360) 993-1105 Toll free: 1-800-993-4402 Website: www.itrheat.com

H2

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


HVAC - HEATING & AIR CONDITIONING

ITR WATER HEATER Imagine long, hot showers at anchor in a quiet cove that is spared the intrusion of noisy engines.

• • • • • • •

Easy to install with front connections Patented no smoke, no smell burner Enjoy unlimited supply of hot water with front connections • Easy to install On-Board electronic•controls Patented no smoke, no smell burner Marine-grade construction • Enjoy unlimited supply of hot water Independent of engine or shore electronic power • On-board controls Quiet, reliable and efficient

• Ea • Pa • En • On • Ma • Ind • Qu

• Marine-grade construction • Independent of engine or shore power The only DC diesel-fired continuous output domestic hot water heater • Quiet, reliable and efficient

OPTIONAL FEATURE: USE THE WATER BY ITR® FOR SPACE HEATING!

OPTIONAL FEATURE: USE THE WATERHEATER BY ITR® FOR SPACE HEATING!

With the optional Heating Module, the heated domestic water is used as the heat source,With the optional Heating Module, the heated dom producing up to 14000 BTU/h. The Heating Module uses a 316 Stainless Steel heat exchanger producing up to 14000 BTU/h. The Heating Mod to isolate the domestic water and prevent any contamination while in space heating mode. to isolate the domestic water and prevent any con

TECHNICAL SPECIFICATIONS:

TECHNICAL SPECIFICATIONS:

DIMENSIONS:

14” W xHeating 14” H Module x 24”LOption

POWER USAGE:

65 watts

WEIGHT:

80 lbs. empty, 124 lbs. filled

VOLTAGE:

10-16 volts @ 12VDC

STORAGE:

5.5 US gallons/20 litres

CURRENT:

DIMENSIONS:

14” W x 14” H

WEIGHT:

80 lbs. empty,

5.4 amps

5.5 US gallons

STORAGE:

WATER CONNECTIONS: 1/2” NPT

AC:

EXHAUST OUTLET:

1.5”

FUEL CONSUMPTION:

0.34 US gal./hr.

120 volts, 1500 watt heating element

WATER CONNECTIONS: 1/2” NPT

TEMPERATURE RISE 65°F at 1 GPM, EXHAUST 52° OUTLET: at 1.5 GPM FROM INPUT

FUEL CONSUMPTION:

Output temperature is preset to 120ºF with UL listed anti-scald mixing valve The WaterHeater by ITR® is in compliance with UL and CSA codes for water heaters Due to our commitment for quality and on-going product improvement, above figures are subject to change without notice.

1.5”

0.34 US gal./hr

Output temperature is preset to 120ºF with UL listed The WaterHeater by ITR® isITR in compliance with UL a U.S.A. Due to our for quality and on-going prod 600 SEcommitment Maritime Avenue, Suite 260,

ITR CANADA 2431 Simpson Road, Vancouver, Washington, U.S.A. 98661 Richmond, BC, Canada V6X 2R2 Tel: (360) 993-4877 ITR CANADA Tel: (604) 278-1272 Fax: (360) 993-1105 2431 Simpson Road, Fax: (604) 278-1274 Current Voltage Power Exhaust NPT Storage Dimensions (mm) E-Mail: Weight info@itrheat.com Toll free: 1-800-993-4402 Website: Fuel www.itrheat.com Toll Code free: 1-800-755-1272 Richmond, BC, Canada V6X Temp. 2R2

ITR-33000

W

L

Full (Kg)

Capacity (Litres)

Water Fittings

Outlet

H

Consumption per hour

340

203

600

76

912

1/2"

1-1/5"

1.3 L /hour

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

Usage

@ 12V

Rise

DC (amps) from Input (Watts) Tel: (604) 278-1272 Fax:65(604)10 278-1274 - 16 5.4 11-18°C E-Mail: info@itrhe Toll free: 1-800-755-1272

195


HVAC - HEATING & AIR CONDITIONING

Cabin Fans

Part No. 6002 Standard Cabin Fan Dimensions: 10” Wide ♦ 6” High ♦ 6.75” Deep Power Requirement: .9 Amp @ 12 VDC True Output: 8700 BTU/h @ 110° F and 3.0 GPM Connections: 3/4” Hose Construction: Stainless Steel Case, Full Flow copper coil The 6002 Standard Cabin Fan is the basic unit that is used for several different fan applications. There are several faceplates available that allow ducted as well as direct flow installations. As with all ITR cabin fans, the core has low restrictions and can be used in multi-fan loops.

Part No. 6093 High Output Cabin Fan Dimensions: 10” Wide ♦ 6” High ♦ 6.75” Deep Power Requirement: 1.6 Amp @ 12 VDC True Output: 12000 BTU/h @ 110° F and 3.0 GPM Connections: 3/4” Hose Construction: Stainless Steel Case, Full Flow copper coil The 6093 High Output Cabin Fan is ideal for applications that require high output and low power draw. It is typically used to heat large areas and is usually ducted.

Part No. 6048 Small Case Defroster Fan Dimensions: 10” Wide ♦ 6” High ♦ 6.75” Deep Power Requirement: 10.5 Amp @ 12 VDC on High True Output: 16000 BTU/h @ 110° F and 3.0 GPM on High Connections: 3/4” Hose Construction: Stainless Steel Case, Full Flow copper coil The 6048 cabin fan is typically used in applications that require very high output and can be used as a small defroster fan. The fan is typically ducted. A 3-speed fan switch is available for this unit.

Part No. 6094 Low Profile Galvanized Cabin Fan Dimensions: 13.25” Wide ♦ 4.5” High ♦ 8.0” Deep Many of the parts in the parts and accessories section have several different configurations, Power Requirement: 1 amp @ 12 VDC True Output: 6000 BTU/h 110° 3.0 list GPMfor the part shown is an example of the overall configuration. Please go@to theF and price Connections: ¾” Hose

Construction: case, Tube and Fin copper core information on the other configurations available for the partGalvanized you need.

16

The 6094 cabin fan is a low cost, compact and extremely efficient cabin fan that is ideal for multi-fan series or manifold plumbed systems. With its dual brushless motor fans, it is quiet and the multi-pass core design has very low restriction. The mounting brackets are part of the case.

Part No. 6095 Small Space Galvanized Cabin Fan

196

Dimensions: 9.0” Wide ♦ 5.5” High ♦ 5.75” Deep Power Requirement: .5 amp @ 12 VDC True Output: 4000 2013 BTU/h and Limited 3.0 GPM Equipment Catalogue /JAN@ / ©110° So-PacFMarine Phone 09 448 5900 / Fax 09 448 5911 info@sopac.co.nz / www.sopac.co.nz Connections: ¾” /Hose Construction: Galvanized Case, Tube and Fin copper core


HVAC - HEATING & AIR CONDITIONING Part No. 6095 Small Space Galvanized Cabin Fan Dimensions: 9.0” Wide ♦ 5.5” High ♦ 5.75” Deep Power Requirement: .5 amp @ 12 VDC True Output: 4000 BTU/h @ 110° F and 3.0 GPM Connections: ¾” Hose Construction: Galvanized Case, Tube and Fin copper core The 6095 cabin fan is a low-cost solution for small space heating. The 6094 is ideal for small cabins and heads. A low-restriction multi-pass coil allows multiple units on a single loop. The fan is a low-amperage brushless motor. The mounting brackets are part of the case.

Part No. 6096 Low Profile Dual Fan Defrost Heater Dimensions: 15.5” Wide ♦ 6.0” High ♦ 13.0” Deep Power Requirement: 9.8 Amps @ 12 VDC on High Setting True Output: 20000 BTU/h @ 110° F and 3.0 GPM Connections: ¾” Hose Construction: Plastic Case, Tube and fin copper core The 6069 Low profile defrost fan is designed as a high output solution for defroster and large space heating applications. The plastic case includes 4, 2.5” outlets that can be adapted to use 2” or 3” duct. In applications that require a single output point, the 4 ducts can be removed. The unit comes with SS mounting brackets. A 3-speed fan switch is available for this unit.

Many of the parts in the parts and accessories section have several different configurations, the part shown is an example of the overall configuration. Please go to the price list for information on the other configurations available for the part you need.

Accessories

Cabin Accessories

17

Part No. 1017 Air Vent Adjustable round 4” Black or 1017W White Part No. 1051 Air Vent Adjustable round 3” Black Part No. 60011 Air Vent Adjustable round 2” Black ITR stocks a variety of vent outlets from 2” to 4” in diameter that are compatible with virtually any type of vent ducting. Maximum temperature of air is 180° F.

Part No. 1013 Outlet Plate Double 4”/4” Part No. 1056 Outlet Plate Triple 3”/3”/3” ITR makes a variety of outlet plates designed to fit the Standard Fan profile. The outlet plates are Stainless Steel with plastic vent collars. The vent collars are available in 2”, 3” and 4” single and multiple outlet configurations. See price list for additional information and part numbers.

No. 1048 Plate Grill 6” X 9” Black Anodized

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Face Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

No. 1049

197


HVAC - HEATING & AIR CONDITIONING No. 1048 Face Plate Grill 6” X 9” Black Anodized No. 1049 Face Plate Grill 7” X 12” Black Anodized No. 1057 Face Plate Grill 4” X 12” Black Anodized These grills are anodized aluminum and are designed to be surface mounted. They can be used with any of the ITR cabin fans. The 1057 grill is also available in a bare aluminum mill finish for coating to the customer requirements.

CIRCULATION PUMPS

Many of the parts in the parts and accessories section have several different configurations, the part shown is an example of the overall configuration. Please go to the price list for information on the other configurations available for the part you need.

Circulation Pumps

18

No. 16017 Water Pump Johnson 3/4” The Johnson 3/4” pump features a magnetically driven impeller and draws 2.1 Amps @ 12 VDC. It should only be used in smaller systems with less than 5 cabin fans and less than 100 feet of total hose run. It is an excellent choice as an engine pre-heat pump and because of its small size, an excellent choice for multi-pump manifold systems.

No. 16018 Water Pump March 3/4” Plastic Head The March 3/4” plastic head pump is our most popular model. It is a magnetic drive and draws 3.5 amps @ 12 VDC. This is the pump of choice for any series plumbed system with no more than 6 cabin fans and 150’ of 3/4 heater hose. The pump is extremely reliable and has replaceable brushes. This pump has been developed specifically for ITR and is designed to operate without decoupling within the heater voltage limits.

No. 16014 Water Pump Johnson 1.5” The Johnson 1.5” pump is the large system pump for series plumbed systems that are outside of the recommended limits or for large manifold systems. This pump is a seal-type pump and draws 7.4 amps @ 12 VDC.

198

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


HVAC - HEATING & AIR CONDITIONING

PUMP CHART

PLUMBING

Plumbing

Part No 20001 Expansion Tank Horizontal 3/4” Connections ITR makes a variety of Expansion Tanks. These are constructed of copper, in 4” and 6” diameters with 7.5 PSI pressure caps and mounting brackets. The 6” tanks can be ordered with ¾” or 1.5” connections. All systems should be designed to use the largest expansion tank possible. ITR also carries high quality plastic overflow bottles in 2 qt. and 4 qt. sizes

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

199


HVAC - HEATING & AIR CONDITIONING

Part No. 20030 2 Quart Overflow Bottle ITR carries two sizes of overflow bottle, the 2 quart model shown here and a 4 quart model. These are heavy-duty parts and are the only approved overflow bottle for ITR systems.

Part No. 2266 .75” In-Line Air Bleeder The in –line air bleeder is used facilitate removal of trapped air in the system. At least one bleeder should be used in each plumbing loop.

HEAT EXCHANGERS & EXHAUST ACCESSORIES Heat Exchangers & Exhaust Accessories

Many of the parts in the parts and accessories section have several different configurations, the part shown is an example of the overall configuration. Part No. 5130 Please go to the price list for WP-1-20 Part No.part 5130 information on the other configurations availableHeat for Exchanger the you need.

ITR carries three veryWP-1-20 efficient flat plate SS heat Heat Exchanger exchangers that fit a variety of applications. The 5130 ITR carries three very efficient plate SS heat exchang21 exchanger has 20 plates andflat is extremely efficient at ers that fit a variety of applications. The 5130 exchanghigh heat loads. It is suitable for use as an engine heat er has 20 plates and is extremely efficient at high heat exchanger for on-demand hotengine water.heat Since the 5130 loads. It is or suitable for use as an exchanger or for on-demand hot water.are Since thewall 5130 and used 5132 and 5132 heat exchangers single when heat exchangers singlethe wall when must used be for filled potable for potable water are support system with water support the system must be filled with non-toxic non-toxic coolant (usually labelled “GRAS”). ITR offers a coolant (usually labeled “GRAS”). ITR offers a doubledoublewall heat exchanger, P/Nwhich 5142,can which can with be used wall heat exchanger, P/N 5142, be used with coolant in domestic water applications. toxictoxic coolant typestypes in domestic water applications.

Part No. 13008 Muffler 1.5” SS Part No. 13009 Part No. 13008 Muffler 2” SS Muffler 1.5” SS ITR’s unique allows thethe useuse of mufflers ITR’s uniqueburner burnertechnology technology allows of to further quiet the heater exhaust. These mufflers come mufflers to further quiet the heater exhaust. These in 1.5” and 2” diameters, in 12” and 18” lengths. They mufflers come in 1.5” and 2” diameters, in 12” and 18” are made of Stainless Steel and are the only mufflers lengths. arewith made Stainless andencourare the approvedThey for use ITRof systems. ITRSteel strongly only for use withcompatible ITR systems. Use agesmufflers the use approved of the longest muffler with the model. muffler compatible with the heater model. ofheater the longest

200

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


Part No. 5173

We have a variety of exhaust insulation materials, designed 15° Exhaust Only Through Hull as socks or wraps and sized to fit the 1.5” and 2.0” exhaust pipe. ITR can provide built and exhaust This item can also be used for custom both power sail cladding applicaby special order. applications, the angle of the through-hull tions. In power allowsNo. a rise to be designed into the exhaust installation. Part 5135 In sail applications the exhaust can be mounted on a reExhaust Heat Sleeve 1.5” verse transom at a correct angle. The part is made of 316 We a variety materials,Both designed SS have andNo. is available for 1.5” insulation and 2” exhausts. sizes Part 2322of exhaust as socks aor2.5” wraps and sized to fit thecome 1.5” and 2.0” exhaust require mounting hole and with gaskets for 1.5” Elbow with 2 Flanges SS Part No.can 5173 pipe. ITR also provide custom built exhaust cladding heat protection. by special order. 15° Exhaust Only Through Hull exhaust elbows ITR provides several 2.0” and 2.5” radius in 1.5” and 2” ID in Staiinless Steel and mild steel. They Thisavailable item canwith be no used for both powerand and2 sail applicaare flange, one flange flanges. We tions. In power applications, the angle of the through-hull also have sealant and T-bolt clamps to secure and seal the allows a components. rise to be designed into the exhaust installation. exhaust Part 2322 the exhaust can be mounted on a reIn sail No. applications 1.5” Elbow at with 2 Flanges SS verse transom a correct angle. The part is made of 316 SS and is available for 1.5” and 2” exhausts. Both sizes ITR provides several 2.0” and 2.5” radius exhaust elbows require a 2.5” mounting hole and come with gaskets for in 1.5” and 2” ID in Staiinless Steel and mild steel. They heat protection. are available with no flange, one flange and 2 flanges. We Part No. 5139 also have sealant and T-bolt clamps secure Exhaust Through-Hull Plugto1.5” SSand seal the exhaust components. Part No. 2322 The through hull plug is designed to be used for our comPart No. 5173 1.5” Elbow with 2 Flanges SS bination exhaust Only fittingsThrough and shouldHull be included in every 15° Exhaust system kit. The combination fittings incorporate ITR provides several 2.0” and exhaust 2.5” radius exhaust elbows Part No. 5158 This item can be in used power an 1.5” intake and infor theboth same fitting andsail areapplicavulnerin and 2” exhaust ID Staiinless Steel and and mild steel. They tions. power applications, the angle of the Combination Exhaust Through-hull 1.5” We ableavailable toIn water ingestion in high sea conditions. are with no flange, one flange and 2 through-hull flanges. allows a rise to beand designed into thetoexhaust installation. also have sealant T-bolt clamps secure and seal the ITR makes combination exhaust through-hulls in aon number In sail applications the exhaust can be mounted a reexhaust components. of configurations both 1.5” and The 2” exhausts. These Part No. 5139 verse transom atfor a correct angle. part is made of units 316 combine the 2” combustion intake with the outSS and is available for 1.5”airand 2” exhausts. Both sizes Exhaust Through-Hull Plug 1.5” SSexhaust let. Care mustmounting be taken hole to use these fittings only if for the require a 2.5” and come with gaskets Part No. 5173 fitting can be completely protected water The through hull plug is designed to from be used for ingestion. our comheat protection. Part No. 5158 15°1.5” Exhaust Hull The fittings Only requireThrough a 3”should mounting hole and 2” bination exhaust fittings and be included in the every Combination Exhaust Through-hull 1.5” fittings require a 3.5” mounting hole. They are made of system kit. The combination exhaust fittings incorporate Part No. 5173 This item can be used for both power and sail applica316 SS. an intake and exhaust the the same fitting andthrough-hull are vulner15° Exhaust Onlyinexhaust Through Hull ITR makes combination through-hulls in a number tions. In power applications, angle of the Part 5173 able toNo. ingestion in1.5” high seathe conditions. of configurations fordesigned both and 2” exhausts. These units allows awater rise to be into exhaust installation. This itemthe can used Through for air both power and applica15° Only combine 2” be combustion intake with the sail exhaust In sailExhaust applications the exhaust can Hull be mounted on aoutretions.Care In power applications, the angle of the through-hull let. must be taken to use these fittings only if316 the verse transom at a correct angle. The part is made of Part No. 5173 This item can be for both power and sail applicaallows a rise tocompletely be used designed into the exhaust installation. Part No. 20012 fitting can be protected from water ingestion. SS and is available for 1.5” and 2” exhausts. Both sizes Part No. 5158 15° Exhaust Only Through Hull tions. In power applications, thecan angle the through-hull In sail applications the exhaust beof mounted onthe a reStandard Thermostat The 1.5” fittings require a 3” mounting hole gaskets and 2” require 2.5” mounting hole and come with for Combination Exhaust Through-hull 1.5” allows a arise toat bea designed into the exhaust installation. verse transom correct angle. The part is made of 316 fittings require a 3.5” are applicamade of This item can be usedmounting for both hole. power They and sail heat protection. In sail applications mounted on a reThis thermostat canthe be exhaust usedand forcan any system installation. SS and is available for 1.5” 2” be exhausts. sizes ITR makes combination exhaust inBoth a number 316 SS. tions. In power applications, thethrough-hulls angle of the through-hull Part No. 5139 verse transom at a50° correct angle. The partwith is turned made of 316 Many of the parts in the parts and accessories section have different configurations, The range is several from F to 90°and F and can be by require a 2.5” mounting hole and come gaskets for of configurations for both 1.5” 2” exhausts. Theseoff units allows a riseThrough-Hull to be designed into the exhaust installation. Exhaust Plug 1.5” SS SS and is available for 1.5” and 2” exhausts. Both sizes moving the control lever allair the way to thethe left. Available heat protection. combine the 2” combustion intake with exhaust outIn sail applications the exhaust can be mounted on a rethe part shown is an example of the overall configuration. Please go toand the price list for require a 2.5” mounting hole come with gaskets for only in white. let. Care must taken to use these fittings if316 the The through hull plug is designed to bepart used foronly ourofcomverse transom atbe a correct angle. The is made heat protection. fitting can be completely protected from water ingestion. fittings and and should be included in every SS available for 1.5” 2” exhausts. Both sizes information on the other configurations availablebination forand theisexhaust part you need. The 1.5”kit. require hole a 3”exhaust mounting hole gaskets and thefor 2” system The combination fittings incorporate require a fittings 2.5” mounting and come with fittings require a 3.5” mounting hole. They are made of an intake and exhaust in the same fitting and are vulnerheat protection. Part No. 20012 316 able SS. to water ingestion in high sea conditions.

HVAC - HEATING & AIR CONDITIONING

Exhaust & Thermostats

Exhaust & Thermostats

Exhaust & Thermostats Exhaust & Thermostats Exhaust & Thermostats Exhaust & Thermostats

24

23

Standard Thermostat Many of the parts in the parts and accessories section have several different configurations, This can be go usedto forthe anyprice systemlist installation. Partthermostat No. 5139 the part shown is an example of the overall configuration. Please for The range isThrough-Hull from 50° F to 90°Plug F and 1.5” can beSS turned off by Exhaust the control all the way to the left. Available information on the other configurations availablemoving for the youlever need. Part No.part 5139 The through only in white.hull plug is designed to be used for our comExhaust Through-Hull Plug 1.5” SS in every Many of the parts in the parts and accessories section have several different configurations, bination exhaust fittings and should be included Part No. 5139 system kit. The combination exhaust fittings incorporate 23 The through hull plug is designed to be used for our comMany of the partsisinanthe parts and section have several different configurations, Exhaust Through-Hull Plug 1.5” SS the part shown example of accessories the overall configuration. Please the price list an intake and exhaust ingo theto same fitting and arefor vulnerbination exhaust fittings and should be included in every ablethrough water ingestion high sea Part No. 5139 The hull plug isin designed toconditions. be usedlist for our the part shown is an example of the overall configuration. Please go toexhaust the price for comsystem kit.part The combination fittings incorporate information on the other configurations available for to the you need. Exhaust Through-Hull Plug 1.5” SSareinvulnerbination exhaust fittings and should be included every an intake and exhaust in the same fitting and information on the other configurations availablesystem for to the you need. kit.part The combination fittings incorporate able water ingestion in highexhaust sea conditions. The through hull plug is designed to be used for our coman intake and exhaust in the same fitting and are vulnerPart No. 20012 bination exhaust fittings and should be included in every able to waterThermostat ingestion in high sea conditions. Standard system kit. The combination exhaust fittings incorporate an intake and exhaust in the same fitting and are vulnerThis thermostat can be used for any system installation. accessories section able tohave waterseveral ingestiondifferent in high seaconfigurations, conditions. The range is from 50° F to 90° F and can be turned off by moving the control lever go all the the left. the overall configuration. Please to way the toprice list Available for only in white.

Many of the parts in the parts and the part shown is an example of information on the other configurations available for the part you need.

23

THERMOSTATS

24

Part No. 20012 Standard Thermostat Part No. 20012 This thermostat can be used for any system installation. Standard The range is Thermostat from 50° F to 90° F and can be turned off by Part No. 20012 moving the control lever all the way to the left. Available This thermostat can be used for any system installation. Standard only in white.Thermostat The range is from 50° F to 90° F and can be turned off by Part No. This thermostat canlever bedifferent used forway any installation. section have several configurations, moving the 20012 control all the tosystem the left. Available Standard Thermostat The is from 50° F to 90° F and can be turned off by only range in white.

Many of the parts in the parts and accessories the part shown is an example of the overall configuration. Please to way the toprice list Available for moving the control lever go all the the left. This thermostat can be used for any system installation. only in white. Equipment Catalogue 2013/JAN / © So-Pac Marine Limited is from 50° need. F to 90° F and can be turned off by201 information on the other configurations availableThe forrange the part you Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz moving the control lever all the way to the left. Available only in white.


This thermostat can be used for any system installation. The temperature control range is from 40° F to 90° F and can be set for Centigrade or Fahrenheit. It is powered Part No. 20024 by 2 included AA batteries and has numerous settings to Digital Thermostat availablematch for the part you need. anyZone installation requirements.

24

HVAC - HEATING & AIR CONDITIONING

information on the other configurations This thermostatPlease can be used for the any system installation. the part shown is an example of the overall configuration. go to price list for The temperature control range is from 40° F to 90° F and Many of the parts in the parts and accessories section several different configurations, can set for Centigrade or Fahrenheit. It is powered onlybe inhave white.

SWITCHES Thermostats & Switches by 2 included AA batteries numerous settings to moving the control lever alland thehas way to the left. Available match any is installation The range from 50° requirements. F to 90° F and can be turned off by Part No. 20024 This thermostat can be used for any system installation.

Digital Zone Thermostat Standard Thermostat This thermostat can be used for any system installation. Part No. 20012

24

The temperature control range is from 40° F to 90° F and can be set for Centigrade or Fahrenheit. It is powered by 2 included AA batteries and has numerous settings to Part 2122 match No. any installation requirements. only in white. LCD Remote Heater Control moving thepart control lever all the way to the left. Available information on the other configurations availableThis forcontrol the you need. standard with H2 can and be H2L heaters, The range is isfrom 50° F to 90°the F and turned off by optional with the SCH It features an on/off This thermostat can be heater. used forthe any systemlist installation. the part shown is an example of the overall configuration. Please go to price for switch for enabling the heater function and a scrolling Part No. Standard Thermostat LCD display that shows different the heater status. Many of the parts in the parts and accessories section have2122 several configurations,

LCD Heater Control Part Remote No. 20012

This control is standard with the H2 and H2L heaters, able to water high seaItconditions. optional with ingestion the SCH in heater. features an on/off an intake exhaust the same fitting anda are vulnerswitch for and enabling theinheater function and scrolling system kit. that The shows combination exhaust fittings incorporate LCD display the heater status. bination exhaust fittings and should be included in every The through hull plug is designed to be used for our comPart No. 2122

Switches

24

LCD Remote Heater Control Exhaust Through-Hull Plug 1.5” SS Part No. 5139 availableThis forcontrol the part you need. is standard with the H2 and H2L heaters, only in white.

information on the other configurations optional withcontrol the SCH It features an on/off moving the leverheater. all the way to the left. Available the part shown is an example of the overall configuration. Please go to the price list foroff by Part No. 5264 switch for enabling the heater function and a scrolling The range is from 50° F to 90° F and can be turned LCD display that shows the heater status. Multi-Function Control Panel This to thermostat can bedifferent system installation. able water ingestion inused high for seaany conditions. Many of the parts in the parts and accessories section have several configurations, Part No. 2010

Switches

an intake and exhaust inswitches the same fitting andCabin are vulnerThis component features that control Fan LED Remote Heater Control Standard Thermostat systemDomestic kit. The Water combination exhaust fittingsHeat incorporate speed, function and Engine funcPart No. 20012 bination exhaust fittings andthe should be included in every This control is standard SCH heater. It features an tion. It can be used withwith any ITR heating system. The through plug is designed to be used for our on/off switch hull for enabling the heater function and a comsingle digit/symbol display that shows the heater status.

24

Exhaust Through-Hull Part No.5264 2010 information on the other configurations available for No. the part you need. Plug 1.5” SS Part heat protection. Part No. 5139 LED Remote Heater Control Multi-Function Control Panel require a 2.5” mounting holeto and come withlist gaskets the part shown is an example of the overall configuration. Please go the price for for This control is standard heater. It Both features an SS and is available for with 1.5” the andSCH 2” exhausts. sizes This component features switches that control Cabin Fan Many of the parts in the parts and accessories section have several different configurations, on/off switch for the heater function and aofsingle verse transom at enabling a correct angle. The part is made 316 speed, Domestic Water function and Engine Heat func-

Switches

only white. digit/symbol displaythe thatexhaust shows the status.on a reIn sailinapplications canheater be mounted tion. It can be used with any ITR heating system. movinga the lever all the the left. Available allows risecontrol to be designed intoway the to exhaust installation. The range is from 50° F to 90° and can be turned off by tions. In power applications, theF angle of the through-hull Part No.can 2010 This item thermostat be for used for power any system installation. This becan used both and sail applica-

LED No. Remote Part 5264Heater Control

able to waterThermostat ingestion in high sea conditions. Standard 15° Exhaust Only Through Hull Multi-Function Control Panel Many of the parts in the parts and accessories section have several different configurations, This control is standard the SCHfitting heater. It are features an an intake and exhaust with in the same and vulnerPart No. 20012 Part No. 5173 Part No. 5309 heat protection. on/off switch for enabling the heater function and a single system kit. The combination exhaust fittings incorporate This component features switches that control Cabin Fan the part shown is an example of the overall configuration. Please go toand thecome price list for for require a exhaust 2.5” mounting hole with gaskets Hi/Low Fan Speed Switch digit/symbol display thatfunction shows the status. bination fittings and should be included every speed, Domestic Water andheater Engine Heat in funcSS and is available for 1.5” and 2” exhausts. Both sizes The through hull plug is designed to be used for our cominformation on the other configurations availabletion. for the part you need. It can be used with any ITR heating system. This switch allows control forThe up to three CabinofFans verse transom at speed a correct angle. part is made 316

Exhaust & Thermostats

only in white. (except the defroster fans). The high output fan requires

In sail applications the exhaust can be mounted on a reExhaust Plug 1.5” moving the Through-Hull control lever all the way to the SS left. Available Many of the parts in the parts and accessories section have several different configurations, aallows tworange fan speed switch. switches also anoffoff a rise to be designed into installation. The is5139 from 50° F toThe 90° F the and exhaust can be have turned by 25 Part No. position. tions. In power applications, the angle of the through-hull This thermostat can be used for any system installation. the part shown is an example of the overall configuration. Please go to the price list for This item can be used for both power and sail applica5309 Standard Thermostat information on the other configurations availablePart for No. the part you need. 15° Exhaust Only Through Hull

Hi/Low Fan Speed Switch Part No. 20012 Part No. 5173

This switch allows speed control for up to three Cabin Fans (except the defroster fans). The high output fan requires able to waterseveral ingestiondifferent in high seaconfigurations, conditions. Many of the parts in the parts and accessories section have a two fan speed switch. The switches also have an off an intake and exhaust in the same fitting and are vulnerposition. the part shown is an example of the overall configuration. Please go toexhaust the price listincorporate for system kit. The combination fittings bination exhaust fittings and should be included in every heat protection. information on the other configurations availablePart for through the part you The hull plugneed. is designed be used our comNo. 5309 require a 2.5” mounting hole andtocome withfor gaskets for Hi/Low Speed Switch SS and isFan available for 1.5” and 2” exhausts. Both sizes Exhaust Through-Hull Plug 1.5” SS verseNo. transom at a correct angle. The part is made of 316 Part 5312 Part No. 5139 This switch allows speed upbe to mounted three Cabin In sail applications the control exhaustfor can on Fans a re3-Speed Defroster Fan Switch (except the defroster fans). The high output fan requires allows a rise to be designed into the exhaust installation. a tions. two fan speed applications, switch. Thethe switches also an off power angle of thehave through-hull This is the speed control the 3-speed defrostableswitch toIn water ingestion in high for sea conditions. position. item and can exhaust be usedinfor power erThis fans. an intake theboth same fittingand andsail areapplicavulnersystem kit. The combination exhaust fittings incorporate 15° Exhaust Only Through Hull bination exhaust fittings and should be included in every Part No. 5173 The through hull plug is designed to be used for our com-

25

Exhaust & Thermostats

202

Part No. 5312 ExhaustDefroster Through-Hull Plug 1.5” SS 3-Speed Fan Switch Catalogue 2013 /JAN / © So-Pac Marine Limited Part Equipment No. 5139

25

Exhaust & Thermostats

Phone 09 heat 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz protection.

This switch is the speed control for the 3-speed defrosterrequire fans. a 2.5” mounting hole and come with gaskets for SS and is available for 1.5” and 2” exhausts. Both sizes


HVAC - HEATING & AIR CONDITIONING

Pompanette AirAIR Conditioners CONDITIONERS Have been designed from the ground up for the rigors of the sea! Incorporating tried and true technology and creative use of composites Pompanette Air Conditioners to eliminate rust, the entrapment of condensate water and its inherent Odors and Bacteria!

POMPANETTE AIR CONDITIONERS

Noise been and Vibration been addressed our product. NewIncorporating and innovative Designs, processes procedures Have designed have from both the ground up for the inrigors of the sea! tried(patent and truepending) technology and creative useand of composites have been employed to specifically reduce and isolate the noise associated with air conditioners. to eliminate rust, the entrapment of condensate water and its inherent Odors and Bacteria! Have been designed from the ground up for the rigours of the sea! Incorporating tried and true technology and creative use of composites The Pompanette Companies is worldin renowned quality products excellent service Pompanette Air is an Noise and Vibration have ofboth been ourwater product.for New andinherent innovativeand (patent pending) Designs, processes and procedures to eliminate rust, the Group entrapment of addressed condensate and its Odours andcustomer Bacteria! extension that have reputation! have beenofemployed to both specifically and isolate associated air innovative conditioners. (patent pending) Designs, Noise and Vibration beenreduce addressed in the ournoise product. Newwith and processes and procedures Our Goal is to exceed yourofexpectations provide dependable quality products andexcellent Customer Service at a fairPompanette price! The Pompanette Group Companies isandworld renowned forthe quality products and customer service Air is an have been employed to specifically reduce and isolate noise associated with air conditioners. extension of that reputation! The Pompanette Group of Companies is world renowned for quality products and excellent customer service Pompanette Air is an extension of that reputation!

Our Goal is to exceed your expectations and provide dependable quality products and Customer Service at a fair price!

Specifications & Dimensional Data 7,000 Btu

10,000 Btu

21 In/53.3 cm 7,000 Btu 14.12 In/35.8 cm 21 In/53.3 cm 16.25 In/41.2 cm 14.12 In/35.8 cm 13.25 In/33.6 cm 16.25 In/41.2 cm 1.12 In/2.8 cm 13.25 In/33.6 cm

21 In/53.3 cm 10,000 Btu 14.12 In/35.8 cm 21 In/53.3 cm 16.25 In/41.2 cm 14.12 In/35.8 cm 13.25 In/33.6 cm 16.25 In/41.2 cm 1.12 In/2.8 cm 13.25 In/33.6 cm

25.37 In/64.4 cm 12,000 Btu 14.12 In/35.8 cm 25.37 In/64.4 cm 17.12 In/43.4 cm 14.12 In/35.8 cm 14.12 In/35.8 cm 17.12 In/43.4 cm 1 In/2.5 cm 14.12 In/35.8 cm

25.37 In/64.4 cm 16,000 Btu 14.12 In/35.8 cm 25.37 In/64.4 cm 17.12 In/43.4 cm 14.12 In/35.8 cm 14.12 In/35.8 cm 17.12 In/43.4 cm 2.25 In/5.7 cm 14.12 In/35.8 cm

61 Lbs/27.6 Kg 1.12 In/2.8 cm

61 Lbs/27.6 Kg 1.12 In/2.8 cm

70 Lbs/31.7 Kg 1 In/2.5 cm

74 Lbs/33.5 Kg 2.25 In/5.7 cm

6.8 Amps 61 Lbs/27.6 Kg

9.7 Amps 61 Lbs/27.6 Kg

10.5 Amps 70 Lbs/31.7 Kg

13.9 Amps 74 Lbs/33.5 Kg

4.2 6.8 Amps

5 Amps 9.7 Amps

6.2 Amps 10.5 Amps

8.2 Amps 13.9 Amps

Specifications & Dimensional Data

Width Depth Chassis Width Height Overall Depth Chassis Height W/O Elec Box Height Overall Blower Overhang (Not applicable Height W/Oto High ElecVelocity Box units) Weight Overhang Blower (Not applicable to High Velocity units)

Average Amps @ 120V (Cooling WeightMode) Average AverageAmps Amps@ @230V 120V (Cooling Mode)

Average Amps @ 230V (Cooling Mode)

12,000 Btu

Amperage draws will vary based on water flow and water temperature.

4.2 Amps

5 Amps

6.2 Amps

16,000 Btu

8.2 Amps

24000 BTU NOW AVAILABLE

Amperage draws will vary based on water flow and water temperature.

Equipment Catalogue 2013/JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

203


HVAC - HEATING & AIR CONDITIONING

SINGLE DISCHARGE

DUAL DISCHARGE

204

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


HVAC - HEATING & AIR CONDITIONING

CLIMATE CONTROL CENTRE

ClimateControl Control Center Climate Climate ControlCenter Center

User friendly Low Voltage Digital Controls User Userfriendly friendlyLowLowVoltage VoltageDigital DigitalControls Controls The Pompanette control with large easy to read display allows you control both the heating and TheThePompanette control with large easy Pompanette control easyto toread readdisplay displayallows allowsyouyoucontrol controlboth boththetheheating heatingandand cooling functions with Easewith andlarge Simplicity! cooling coolingfunctions functionswith withEase EaseandandSimplicity! Simplicity! Humidity control at the push of a button to keep your boat fresh and dry while you are away! Humidity control at the push of a button Humidity control at the push of a buttonto tokeep keepyour yourboat boatfresh freshandanddrydrywhile whileyouyouareareaway! away! The control can also be operated by an Infrared wireless remote control. The Pompanette remote TheThecontrol can also be operated by an Infrared wireless remote control. The Pompanette remote be operated by all anthe Infrared wirelessthermostats remote control. controlcontrol allowscanonealso remote to control Pompanette in theThe boatPompanette with line ofremote sight control allows oneoneremote to tocontrol allallthethePompanette thermostats in inthetheboat with linelineof ofsight control allows remote control Pompanette thermostats boat with sight point and click control. point and click control. point and click control. Width 3.6 In X Height 3.6 In Width Width3.63.6In InX Height X Height3.63.6In In Cutout = 3.12 X 3.12 Cutout Cutout= =3.12 3.12X 3.12 X 3.12

Simply Point the remote at the Digital Display you wish to adjust set the temperature, operating mode Simply Point the remote at atthetheDigital Point DigitalDisplay Displayyouyouwish wishto toadjust adjustsetsetthethetemperature, temperature,operating operatingmode mode orSimply turn the unittheonremote or off. or orturnturnthetheunitunitononor oroff.off.

GRILLS

Grills Grills Grills

Pompanette offers a full compliment of hardwood Grills in Teak, Cherry, Maple and Mahogany. Pompanette Pompanetteoffers offersa full a fullcompliment complimentof ofhardwood hardwoodGrills Grillsin inTeak, Teak,Cherry, Cherry,Maple MapleandandMahogany. Mahogany. Stock Discharge Grills are available and in stock in the following sizes: Stock sizes: StockDischarge DischargeGrills Grillsareareavailable availableandandin instock stockin- 4x6 inthethefollowing following sizes: 4x4 - 4x8 - 4x10 & 6x10 4x4 4x6 4x8 4x10 4x4 - 4x6 - 4x8 - 4x10& &6x10 6x10 Stock Return air Grills are available and in stock in the Following sizes: Stock Return air Grills are available and in stock in the Following sizes: Stock Return air Grills are available and in8x8 stock in the- Following sizes: - 12x12 - 8x10 10x10 - 10x12 8x8 8x8- 8x10 - 8x10- 10x10 - 10x10- 10x12 - 10x12- 12x12 - 12x12 Special sizes or wood species available upon request! Special Specialsizes sizesor orwood woodspecies speciesavailable availableupon uponrequest! request! White Aluminum Grills Discharge Grills are available and in stock in the following sizes: White and in instock in the following WhiteAluminum AluminumGrills GrillsDischarge DischargeGrills Grillsareareavailable available followingsizes: sizes: 4x4 - 4x6and - 4x8 stock 4x10in&the 6x10 4x4 4x6 4x8 4x10 & 6x10 4x4 - 4x6 - 4x8 4x10 & 6x10 White Aluminum Return Air Grills are available and in stock in the following sizes: White and in instock in inthethefollowing sizes: WhiteAluminum AluminumReturn ReturnAirAirGrills Grillsareareavailable available following sizes: 8x8 - and 8x10 -stock 10x10 - 10x12 - 12x12 8x8 8x10 10x10 10x12 12x12 8x8 - 8x10 - 10x10 - 10x12 - 12x12

AIR MANAGEMENT PRODUCTS Air Management Products

Air AirManagement ManagementProducts Products

Pompanette’s Transition and Duct Rings are made of Sturdy and Non-Obtrusive black ABS PLASTIC. Pompanette’s Pompanette’sTransition TransitionandandDuct DuctRings Ringsarearemade madeof ofSturdy SturdyandandNon-Obtrusive Non-Obtrusiveblack blackABS ABSPLASTIC. PLASTIC. Standard Transitions, matching stock grill sizes. Standard StandardTransitions, Transitions,matching matchingstock stockgrillgrillsizes. sizes. Transitions w Rear Rings, matching stock grill sizes. Transitions Transitionsw wRear RearRings, Rings,matching matchingstock stockgrillgrillsizes. sizes. Transitions w Side Rings, matching stock grill sizes. Transitions Transitionsw wSide SideRings, Rings,matching matchingstock stockgrillgrillsizes. sizes. Duct Rings Round and Oval, 4” - 5” - 6” - 7” Duct DuctRings RingsRound RoundandandOval, Oval,4”4”- 5”- 5”- 6”- 6”- 7”- 7” Ducting is available in standard sizes both Insulated and Non-insulated. Ducting Ductingis available is availablein instandard standardsizes sizesboth bothInsulated InsulatedandandNon-insulated. Non-insulated.

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

205


HVAC - HEATING & AIR CONDITIONING

CIRCULATING PUMPS Our longtime customers rely on our stainless steel and bronze pumps, and once you've owned one, you'll know why. 5 different models with flow rates from 225 gph to 1,200 gph cover a wide variety of uses. All pumps in this series come with a one-year warranty and will provide trouble free use in fresh or salt water. You can even use it in hot water up to 45°C! Features & Benefits • One year warranty • UL Listed for consumer confidence • Premium stainless steel and bronze construction for longevity • Six or twenty foot power cord for convenience • Suitable for fresh or salt water applications • Can be used in hot water applications up to 45°C • Extremely quiet operation • Use submerged or in open air • Corrosion resistant • 115 or 220 volt motors • Thermally protected • Optional Mounting Bracket Available (model MSUB OR MSUBM) • Operate horizontal or volute down • MS225 and MS320 have ½” MNPT intake and ¼” MNPT discharge • MS580, 900,1200 have ¾” MNPT intake and ½” MNPT discharge

MADE IN USA US COAST GUARD APPROVED

230V - 50HZ PERFORMANCE

206

Code

Amps Max

CAL-MS225 CAL-MS320 CAL-MS580 CAL-MS900 CAL-MS1200

.5 .7 1.3 1.5 1.9

Max Flow LPH 860 1170 2600 2800 3400

Max HT. M

1' /.3m

3' / .9m

5' / 1.5m

7' / 2.1m

9' / 2.7m

11' / 3.3m

13' / 3.9m

15' / 4.5m

17' / 5.3m

1.8 3.8 4.2 4.8 5.4

725 1040 2400 2480 3100

510 970 2175 2290 2900

240 880 1950 2100 2680

760 1680 1880 2465

620 1375 1620 2200

1000 1330 1950

360 1000 1620

500 1230

650

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


Modular configuration for easy installation – even in small spaces without any control electronics.

PLUMBING & PUMPS

AQUAGIV BLUE SERIE watermakers use very high quality state of the art materials. At the heart of our system is a axial piston pump that only needs to be serviced at the earliest after 8000 operating hours, and does not need any oil changes.

WATERMAKERS

Modular configuration for easy installation – even in small spaces

Membrane vessels on Filters in best industrial Pre-assembled pump/engine stainless steel mounting quality. Including pressure on stainless steel plate relieve valve to remove air industrial The Watermaker, Rugged reduced to thequality basic essentials for the reliablebrackets production of your fresh water.

BLUE SERIES

Parts that are not needed for basic and reliable water production were left out. The result is a Watermaker with the best price compared to performance, which works completely without any control electronics. AQUAGIV BLUE SERIES watermakers use very high quality state of the art materials. At the heart of our system is a DANFOSS® axial piston pump that only needs to be serviced at the earliest after 8000 operating hours, and Membrane vessels on Filters in best industrial Pre-assembled pump/engine does not need any oil changes. stainless steel mounting quality. Including pressure on stainless steel plate brackets Membrane vessels on stainless steel mounting brackets

Rugged industrial quality Pre-assenbled pump/ motor on stainless steel plate. Rugged industrial quality

relieve valve to remove air quality filters, Industrial including pressure relief valve to remove air

Standard Security features s,OWPRESSURESWITCHPROTECTS DANFOSS® highpressure State of the art control panel pump against dry-run Buttons with protection class pump water lubricated (Does s(IGHPRESSURESWITCHFOR IP 64 not require oilchanges) protection of the system Serviceintervall 8.000 hours s!LLELECTRICSREADYTOUSE preassembled s!LLHOSESCERTIlEDFORDRINKING DANFOSS® high pressure State of the art control panel WATERAPPLICATIONSCERTIlEDTO Standard Security features pump, water lubricated (does buttons with protection class DVGW, KTW, NSF, FDA and s,OWPRESSURESWITCHPROTECTS not require oil changes). DANFOSS® highpressure State of the art control IP 64 panel WRAS pump against dry-run Service interval 8000 hours Buttons with protection class pump water lubricated (Does s(IGHPRESSURESWITCHFOR IP 64 Membrane not require Model oilchanges) Output Voltage/Power protection of the system Serviceintervall 8.000 hours s!LLELECTRICSREADYTOUSE preassembled s!LLHOSESCERTIlEDFORDRINKING short membrane(s) WATERAPPLICATIONSCERTIlEDTO DVGW, KTW, NSF, FDA and 27L-s 27 ltrs/hr 1x21’’ 12/24V, 400 Watts WRAS

TECHNICAL DATA

40L-s

40 ltrs/hr

2x21’’

12/24V, 400 Watts

74L-s

74 ltr/std

2x21’’

24V, 630 Watts 230V, 750 Watts

long membrane(s) 80L-230V

80 ltrs/hr

1x40’’

230V, 1500 Watts

140L-230V

140 ltrs/hr

2x40’’

230V, 1500 Watts

180L-230V

180 ltrs/hr

3x40’’

230V, 1500 Watts

210L-230V

210 ltrs/hr

4x40’’

230V, 1500 Watts

260L-230V

260 ltrs/hr

4x40’’

230V, 2200 Watts

boost pump 12/24/230V, 220 Watts CatalogueNorth 2013/JAN / © So-Pac Marine 8-10 VolknerEquipment Pl, Albany, Harbour | Ph: Limited 09 448 5900 | Fax: 09 448 5911 | info@sopac.co.nz | www.sopac.co.nz Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

207


automated flush - even in your absence: the control of the new SILVER SERIE is child’s play, and relieves the user of almost all the work.

PLUMBING & PUMPS Remote control

SILVER SERIES The optional remote control allows you an easy control and monitoring from a different place.

Processor control Keep the track. The constant monitoring of salinity, the constant monitoring of operating conditions and the fully automated flush - even in your absence: the control of the new SILVER SERIE is child’s play, and relieves the user of almost all the work. The optional remote control allows you an easy control and monitoring from a different place. The whole system pre-assembled NEW: Frame in stainless steel

Different membrane sizes for production up to 260 litres/hour

Control the system at place Remote control optionally NEW: also TFT remote control panel available

PLATIN SERIE The high end watermaker You do not want to abstain from amenities on board, that are taken for granted at home? With the fully automated Watermaker-Series from AQUAGIV you will not have to make any compromises any more. The operation is done with a water and impact-proof Infrared-touchscreen display or by pc.

Customer`s Security features s,OWPRESSURESWITCHPROTECTS DANFOSS® highpressure Only pressure has to Innovative pressure regulation pump against dry-run be regulated manually pump water lubricated (Does s(IGHPRESSURESWITCHFOR The inhouse developed “APM” System guarantees a constant pressure and optimal performance not require oilchanges) protection of the system ofServiceintervall the high-pressure 8.000 hourspump. The load of the electric motor is kept as low as possible thereby s!LLELECTRICSREADYTOUSE ensuring low-power consumption and low wear on the watermaker. Energy saving up to 50% preassembled s3ALINITYSENSOR compared to conventional watermakers possible.

PLATIN SERIES

Innovative pressure regulation The inhouse developed “APM” System guarantees a constant pressure and optimal performance of the high-pressure pump. The load of the electric motor is kept as low as possible thereby ensuring low-power consumption and low wear on the watermaker. Energy saving up to 50% compared to conventional watermakers. All parts in stainless steel!

Very wide sizes - depending on customer needs

DANFOSS® highpressure pump water lubricated (Does not require oilchanges). Fully automated flush

NEW: The only watermaker which is fully IP remote capable NEW: Remote diagnostics optionally Remote control TFT remote control panel

208

Customer`s Security features s,OWPRESSURESWITCHPROTECTS Including soft start pump against dry-run Automated pressure control s0ERMANENTMONITORINGOF Engine speed regulated: PRElLTER CONDITION lower power required s(IGHPRESSURESWITCHFOR protection of the system s!LLELECTRICSREADYTOUSE Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz preassembled s3ALINITYSENSOR


PLUMBING & PUMPS

BATHROOMWARE

Stunning Italian design coupled with the innovative VORTEX pump and superior craftsmanship.

The high speed of rotation of the VORTEX pump and the geometric design of its piping create a great vacuum able to remove water and organic waste from the bowl. The high level of performance ensures the greatest possible flexibility in planning the route of the discharge hoses, allowing it to reach significant distances and heights.

Vision

Elite

Impact

Artic Sample now available to view in our Albany showroom

Sky

Equipment Catalogue 2013/JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

209


PLUMBING & PUMPS

Stunning Italian design coupled with the innovative VORTEX pump and superior craftsmanship.

Vision and Impact: complete bathroom suites for the nautical market are now available. Toilet, bidet, wash basins, shower tray and bath tub.

Vision

Impact

Planus offers the entire bathroom range in 12 different colour schemes

210

Equipment Catalogue 2013 /JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


PLUMBING & PUMPS

Why are Toilets absolutely the MOST silent?

1. PLANUS has eliminated the noise of the vortex pump due to the cavitation issue by adding, in the upper part of the pump, the “automatic vent air discharge”. This allows the pump to run imperceptibly and considerably increases its performance.

2. PLANUS has introduced the “water hammer arrestor” as a standard component which eliminates any banging in the water pipes when the solenoid shuts off.

3. PLANUS has introduced the “dripping flush system” which removes the annoying hiss of pressurized water entering the bowl.

Sample now available to view in our Albany showroom

Porcelain toilets are susceptible to deformities which can occur during the firing process. Some imperfections, if occurring in a critical point may inhibit a flush installation against both the floor and the wall. PLANUS utilises a numerical control machine after firing to ensure a perfect and uniform (90°) toilet. Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

211


PLUMBING & PUMPS

EXHAUST WATERLOCKS & SYPHONS WATERLOCKS ARE MADE FROM ELTEX, AN INDUSTRIAL GRADE PLASTIC. THE HEAVY DUTY WALL THICKNESS ABSORBS UNWANTED NOISE AND VIBRATIONS.

GOOSENECK - 312286

GOOSENECK - 312287

Bent Entry Pipe

Straight Entry Pipe

MATERIAL Eltex

EXHAUST DIA MM

MAX ENGINE HP

40/45/50

50

MATERIAL

EXHAUST DIA MM

MAX ENGINE HP

40/45/50

50

Eltex

O40-45-50 O 40-45-50

O5 0 O 45 O4 0

O 110

O 50 480 mm

O 50

O 50

WATERLOCK - 312285 0

Eltex

EXHAUST DIA MM

VOLUME LITRES

MAX ENGINE HP

WALL THICKNESS MM

55/60/65

20

115

10

270

MATERIAL

320

22

O55 O60 O65

230

O65 O60 O55

65

0

212

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


PLUMBING & PUMPS

WATERLOCK - 312288

0

20

64 VOLUME ltrs

MAX ENGINE HP

WALL THICKNESS mm

75/90

33

150

10

O100

O115

O75

5

O7

15 O1 0 0 O1

0

O9

O90

260

Eltex

320

EXHAUST DIA MM

400

0

MATERIAL

312288

312289

EXHAUST THRU-HULL Through Hull Drain CODE 312295

MATERIAL

EXHAUST DIA

ELTEX

40/45/50

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

213


PLUMBING & PUMPS

PLUMBING FITTINGS THRU-HULL 316 SS With Thread Code

Pipe Hose Size mm

Thread Length mm

Flange dia mm

200350

19

51

47

200352

25

64

56

200354

32

64

70

200356

38

57

76

BROAD FLANGE THRU-HULL Bronze With Thread Code

Pipe Hose Size mm

Thread Length mm

Flange dia mm

200330

19

57

51

200332

25

64

70

200334

32

79

76

200336

38

79

83

BALL VALVE Bronze Pressure Cast Code

Pipe Size mm

Port Size mm

Length mm

200114

13

13

53

200116

19

19

60

200118

25

25

73

200120

32

32

83

200122

38

38

94

200124

50

50

111

PIPE TO HOSE ADAPTOR Bronze

214

Code

Style

Pipe Size mm

Barb Size mm

200262

Straight

13

16

200264

Straight

13

19

200266

Straight

19

19

200268

Straight

25

25

200270

Straight

32

32

200274

Straight

38

38

200276

Straight

52

52

200290

90 Degree

13

19

200292

90 Degree

19

19

200294

90 Degree

25

25

200296

90 Degree

32

32

200300

90 Degree

38

38

Equipment Catalogue 2013 /JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


PLUMBING & PUMPS

Special Purpose Fittings

PTH, PTHC, FF, FFC, PTH-S, PTHC-S, PTHD HTH, HTH-S, HTHC-S, TH-CS, TH-W,TH-S, THXL, PN FTH, STH, HSTH, HSTH-XL, TH, TH-S

Special Purpose Thru-Hull Pieces

THT-530, TD, TD-S

Special Purpose Tail Pieces

TP, TPC

Pipe-to-Hose Adaptors Thru-Hull Connections

DM

Drain Manifold Raw Water Manifolds

BRONZE FITTINGS

RWM

2011

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

GROCOy 27

215


PLUMBING & PUMPS

STAINLESS STEEL AND BRONZE FITTINGS PTH, STRAIGHT STANDARD FLOW

LISTED 647B

NPT PIPE

HOSE ID

PTH-500 PTH-5062 PTH-750 PTH-1000 PTH-1125 PTH-1250 PTH-1500 PTH-2000 PTH-2500 PTH-3000 PTH-3000-L PTH-4000 PTH-5000

1/2" 1/2" 3/4" 1" 1-1/4" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3" 4" 5"

1/2" 1/2" or 5/8" 3/4" 1" 1-1/8" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3" 4" 5"

MODEL NO.

NPT PIPE

PTHC, 90� STANDARD FLOW PTHC-5062 PTHC-750 PTHC-1000 PTHC-1125 PTHC-1250 PTHC-1500 PTHC-2000 PTHC-2500 PTHC-3000 PTHC-4000 PTHC-5000

1/2" 3/4" 1" 1-1/4" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5”

HOSE ID

1/2" or 5/8" 3/4" 1" 1-1/8" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5”

PTHD, 45� STANDARD FLOW

A

B

1.90 1.86 2.34 2.37 2.44 2.50 2.88 3.83 4.20 5.05 5.5

HOSE ID

A

B

PTHD-750 PTHD-1000 PTHD-1250 PTHD-1500 PTHD-2000 PTHD-2500 PTHD-3000

3/4” 1” 1-1/4” 1-1/2” 2” 2-1/2” 3”

3/4” 1” 1-1/4” 1-1/2” 2” 2-1/2” 3”

2.98 3.15 3.34 3.73 4.12 5.68 6.03

1.58 1.63 1.68 1.99 2.36 2.66 3.06

MODEL NO.

NPT PIPE

.22 .29 .54 .78 .80 1.12 1.58 2.40 3.85 5.90 9.70

FF-500 FF-750 FF-1000 FF-1125 FF-1250 FF-1500 FF-2000 FF-2500 FF-3000

LISTED 647B

1/2" 3/4" 1" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3"

3/4" 1" 1-1/4" 1-1/8" 1-1/2" 1-3/4" 2-1/4" 2-3/4" 3-1/2"

FFC, 90� FULL FLOW MODEL NO.

FFC-500 FFC-750 FFC-1000 FFC-1125 FFC-1250 FFC-1500 FFC-2000 FFC-2500 FFC-3000

LISTED 647B

A B

NPT PIPE

1/2" 3/4" 1" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3"

MODEL NO.

NPT PIPE

PTH-750-S PTH-1000-S PTH-1250-S PTH-1500-S PTH-2000-S PTH-2500-S PTH-3000-S

3/4” 1" 1-1/4" 1-1/2" 2" 2-1/2” 3"

MODEL NO.

NPT PIPE

3/4” 1" 1-1/4" 1-1/2" 2" 2-1/2” 3"

3/4" 1" 1-1/4" 1-1/8" 1-1/2" 1-3/4" 2-1/4" 2-3/4" 3-1/2"

HOSE ID

3/4” 1” 1-1/4" 1-1/2" 2" 2-1/2” 3”

HOSE ID

3/4” 1" 1-1/4" 1-1/2" 2" 2-1/2” 3”

2011

B

2.28 2.39 2.48 2.48 2.65 3.00 2.89 3.47 3.61

1.38 1.38 1.38 1.38 1.55 1.90 1.75 2.00 2.00

A

B

C

2.06 2.00 2.70 2.38 3.60 4.25 5.40 6.55 8.25

2.25 2.20 3.00 2.44 3.43 4.40 5.15 6.00 6.93

1.38 1.45 1.63 1.75 1.38 1.78 1.85 2.00 2.10

DIMENSIONS IN INCHES A

2.56 2.95 3.35 3.54 3.94 4.73 5.12

WEIGHT (LBS.) PKG

.32 .46 .72 .90 1.18 1.45 2.30 4.30 8.20

WEIGHT (LBS.)

1.50 1.70 2.10 2.20 2.60 2.80 3.20

.26 .41 .57 .77 1.29 2.30 3.12

DIMENSIONS IN INCHES A

B

2.97 3.40 4.00 4.40 5.00 6.25 7.00

10 10 10 10 10 10 10 1 1

WEIGHT (LBS.) PKG

B

1.31 1.50 1.75 1.93 2.25 2.68 3.06

10 10 10 5 5 1 1

.20 .25 .32 .34 .64 .70 .96 1.45 2.60

DIMENSIONS IN INCHES

HOSE ID

PTHC-S SERIES PTHC-750-S PTHC-1000-S PTHC-1250-S PTHC-1500-S PTHC-2000-S PTHC-2500-S PTHC-3000-S

A

10 10 10 5 5 5 1 1 1 1 1

WEIGHT (LBS.) PKG

.25 .36 .56 .82 1.15 1.96 2.61

DIMENSIONS IN INCHES HOSE ID

10 10 10 10 10 10 10 1 1 1 1 1 1

WEIGHT (LBS.) PKG

1.56 1.43 1.63 1.75 1.38 2.25 2.25 2.10 2.00 2.85 3.30

NPT PIPE

WEIGHT (LBS.) PKG

.17 .18 .20 .26 .58 .60 .75 1.05 1.75 2.58 2.95 3.50 5.10

C

2.00 2.05 2.40 2.44 2.53 2.50 3.10 3.35 3.55 5.25 6.20

MODEL NO.

FF, STRAIGHT FULL FLOW

216

1.38 1.80 1.38 1.38 1.38 1.55 1.90 1.90 2.00 2.00 3.00 2.00 2.00

DIMENSIONS IN INCHES

LISTED 647B

28 GROCOy

2.39 2.70 2.39 2.48 2.48 2.65 3.00 3.00 4.00 4.00 5.00 4.25 4.25

DIMENSIONS IN INCHES

LISTED 647B

PTH-S SERIES

DIMENSIONS IN INCHES A B

MODEL NO.

WEIGHT (LBS.)

.51 .79 1.20 1.62 2.61 4.69 6.50

10 10 5 5 5 5 1 1 1

PKG

1 1 1 1 1 1 1

PKG

1 1 1 1 1 1 1

BRONZE FITTINGS

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


PLUMBING & PUMPS

STAINLESS STEEL AND BRONZE THRU-HULL FITTINGS NPS SIZE

BRONZE

#316 SS

HTH-500 HTH-625 HTH-750 HTH-1000 HTH-1125 HTH-1250 HTH-1500 HTH-2000

HTH-500-S HTH-625-S HTH-750-S HTH-1000-S HTH-1125-S HTH-1250-S HTH-1500-S HTH-2000-S

HOSE ID

A

DIMENSIONS IN INCHES B C D E

1/2” 1/2” 2.7 3/4” 5/8” 2.7 3/4” 3/4” 2.7 1” 1” 2.8 1” 1-1/8” 2.8 1-1/4” 1-1/4” 2.8 1-1/2” 1-1/2” 2.8 2” 2” 2.8

0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3

1.7 1.9 1.9 2.3 2.3 2.6 2.9 3.3

1.1 1.1 1.2 1.2 1.2 1.1 1.1 1.1

1.3 1.3 1.3 1.3 1.3 1.3 1.3 1.3

BRONZE #

SS #

PKG

0.4 0.5 0.6 0.9 1.1 1.2 1.5 2.0

0.4 0.4 0.6 0.8 1.0 1.1 1.3 1.8

10 10 10 10 10 12 12 4

BRONZE AND SS THRU-HULLS FOR HOSE

LISTED 647B

#316 SS HTHC-S SERIES HOSE ID

DIMENSIONS IN INCHES B C D

MODEL

NPS SIZE

E

WEIGHT

HTHC-750-S

3/4"

3/4"

2.71 .30

1.90

2.25

1.25

.56

1

HTHC-1000-S

1"

1"

2.75 .30

2.32

2.20

1.25

.81

1

HTHC-1250-S

1-1/4"

1-1/4"

2.75 .30

2.62

3.03

1.25

1.06

1

HTHC-1500-S

1-1/2"

1-1/2"

4.70 .30

2.89

3.40

1.25

1.31

1

HTHC-2000-S

2"

1-3/4"

5.40 .30

3.33

3.65

1.25

2.00

1

A

PKG

LISTED 647B

HTHC-S

has bronze nut

(stainless steel nut available)

#316 SS TH-CS SERIES

Create your own above-waterline plumbing connection. #316 SS thru-hull fitting is threaded NPT inside. MODEL

A

TH-750-CS TH-1000-CS TH-1250-CS TH-1500-CS TH-2000-CS

BRONZE

TH-500-W TH-750-W TH-1000-W TH-1250-W TH-1500-W TH-2000-W TH-2500-W TH-3000-W TH-4000-W TH-5000-W

DIAMETER B

1.90 2.32 2.62 2.89 3.33

1.2 1.2 1.2 1.2 1.2

#316 SS NPS PIPE TH-500-WS 1/2" TH-750-WS 3/4" TH-1000-WS 1" TH-1250-WS 1-1/4" TH-1500-WS 1-1/2" TH-2000-WS 2" TH-2500-WS 2-1/2" TH-3000-WS 3" 4" 5"

OUTSIDE NPSM

INSIDE NPT

WEIGHT

PKG

3/4" 1" 1-1/4" 1-1/2" 2"

1/2" 3/4" 1" 1-1/4" 1-1/2"

.36 .51 .79 .85 1.53

1 1 1 1 1

(stainless steel nut available)

DIMENSIONS IN INCHES WEIGHT PKG A B C W/NUT

2.20 2.20 2.85 2.90 3.15 3.90 3.56 5.00 5.31 5.34

.30 .30 .30 .30 .30 .30 .42 .42 .56 .57

1.70 1.90 2.32 2.62 2.89 3.33 4.40 5.50 7.00 8.18

.40 .42 .72 1.30 1.64 2.30 3.75 6.00 13.20 18.50

TH-CS

has bronze nut

BRONZE AND SS TH SERIES

10 10 10 12 12 1 1 1 1 1

For installations where hull thickness dictates the use of a longer fitting. DIMENSIONS IN INCHES A B C

MODEL

THXL-750-W THXL-1000-W THXL-1250-W THXL-1500-W THXL-2000-W

5.33 5.33 5.45 5.45 5.58

0.30 0.30 0.30 0.30 0.30

1.90 2.32 2.62 2.89 3.34

WEIGHT W/NUT

PKG

0.75 1.00 1.75 2.12 2.52

4 4 6 6 4

PN Series cast bronze pipe nipples provide exact alloy compatibility for making inter-connections between numerous marine components such as seacocks, strainers and check valves. MODEL

PN-500 PN-750 PN-1000 PN-1250 PN-1500 PN-2000 PN-2500 PN-3000 PN-4000

NPT PIPE SIZE

1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4"

DIMENSIONS IN INCHES A B C

1.77 1.77 2.34 2.51 2.49 2.37 3.41 3.53 3.53

0.88 1.06 1.38 1.75 2.00 2.50 3.00 3.63 4.73

BRONZE FITTINGS

0.50 0.75 1.00 1.25 1.50 2.00 2.50 3.00 4.00 ❖

WEIGHT

PKG

0.15 0.19 0.31 0.60 0.69 0.79 1.24 2.25 3.20

10 10 10 10 6 2 1 1 1

LISTED 647B

TH-W has nut

THXL SERIES THXL-W has nut

PN SERIES ■ Cast-in wrench flat simplifies installation and removal ■ Full pipe size flow ■ 1/2" - 4" pipe sizes

2011

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

GROCOy 29

217


PLUMBING & PUMPS

SPECIAL PURPOSE FITTINGS FTH SERIES The concept is simple! Water doesn’t run up hill! In above waterline drain applications, choose between a drip control installation and a flush mount installation. In the drip control installation, the fitting protrudes slightly from the hull. As water flow through the fitting ceases, the last drops fall cleanly from the tapered edge of the fitting. In the flush installation, a cleaner profile is obtained, but if the installation is above the waterline, unsightly stains are likely to appear over time between the fitting and the waterline. The flush installation is, however, ideal for below waterline installations where the serious sailor wishes to reduce drag.

MODEL

FTH-W has nut (Order FTH-L if nut is not required)

DIMENSIONS IN INCHES A B C

NPS PIPE

FTH-500-W FTH-750-W FTH-1000-W FTH-1250-W FTH-1500-W FTH-2000-W FTH-2500-W FTH-3000-W FTH-4000-W FTH-5000-W

Flush Mount Installation

Drip control Installation

1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5"

2.31 2.31 2.56 3.31 3.50 3.56 3.56 5.00 5.31 5.34

.30 .30 .30 .30 .30 .35 .42 .42 .56 .57

WEIGHT W/NUT (LBS.)

PKG

.38 .50 .88 1.38 2.00 2.75 3.75 6.00 13.20 18.5

10 10 10 12 12 1 1 1 1 1

1.75 2.00 2.32 2.93 3.20 3.90 4.40 5.50 7.00 8.18

STH SERIES STH-W has nut (Order STH-L if nut is not required)

HSTH SERIES HSTH-W has nut (Order HSTH-L if nut is not required)

DIMENSIONS IN INCHES B C D

NPS PIPE SIZE

A

STH-500-W

1/2"

2.20

1.05

3.28

2.55

.70

12

STH-750-W

3/4"

2.20

1.05

4.00

3.05

.95

12

MODEL

WEIGHT

PKG

STH-1000-W

1"

2.85

1.05

4.00

3.05

1.25

12

STH-1250-W

1-1/4"

2.90

1.20

4.30

3.35

1.75

9

STH-1500-W

1-1/2"

3.15

1.30

4.83

3.50

2.25

9

STH-2000-W

2"

3.60

1.50

5.75

4.00

3.50

4

HSTH MODELS HSTH-750-W HSTH-1000-W HSTH-1250-W HSTH-1500-W HSTH-2000-W HSTH-2500-W HSTH-3000-W

NPS SIZE

A

B

C

PKG

3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3"

2.20 2.85 2.90 3.15 3.60 3.56 5.00

0.30 0.30 0.30 0.30 0.30 0.42 0.42

1.90 2.32 2.62 2.89 3.33 4.40 5.50

10 10 12 12 1 1 1

HSTHXL MODELS HSTHXL-750-W HSTHXL-1000-W HSTHXL-1250-W HSTHXL-1500-W HSTHXL-2000-W

NPS SIZE

A

B

C

PKG

3/4" 1" 1-1/4" 1-1/2" 2"

5.33 5.33 5.45 5.45 5.58

0.30 0.30 0.30 0.30 0.30

1.90 2.32 2.62 2.89 3.33

1 1 1 1 1

THRU-HULL LOCK NUTS

LISTED 647B

30

218

GROCOy

BRONZE

#316 SS

NPS PIPE

TH-501 TH-751 TH-1001 TH-1251 TH-1501 TH-2001 TH-2501 TH-3001 TH-4001 TH-5001

TH-501-S TH-751-S TH-1001-S TH-1251-S TH-1501-S TH-2001-S TH-2501-S TH-3001-S

1/2" 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 4" 5"

2011

DIMENSIONS IN INCHES A B C

1.50 1.65 2.08 2.50 2.90 3.50 4.72 5.45 7.13 8.18

.33 .33 .33 .45 .45 .45 .70 .70 .70 .70

1.13 1.30 1.55 1.95 2.28 2.75 3.46 4.13 6.00 6.50

WEIGHT (LBS.)

BULK PKG

.05 .04 .11 .21 .32 .54 1.00 1.45 3.61

25 25 25 25 25 10 10 10 1

BRONZE FITTINGS

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


PLUMBING & PUMPS

SPECIAL PURPOSE THRU-HULL THT-530

THRU-HULL FITTING INSTALLATION TOOL

THE CONCEPT

THT-530 fits GROCO THT-530 makes the installation of standard GROCO thru-hull fittings possible by a Thru-hull Fitting Sizes from single installer. Slide the thru-hull fitting, flanged end first, over the tool. (It will 1/2" through 3” stop at the proper step.) Tie a length of monofilament to the eye and place it into the already-cut hole in the hull of the boat. Apply caulking to the flange of the fitting, and pull the fitting through the hole and against the hull from inside the boat. Thread the monofilament through NOT FOR REMOVAL the locknut or seacock. With the fitting pulled firmly against the hull the OF OLD THRU-HULL FITTINGS locknut or the seacock may be screwed onto the fitting.

HULL DRAINS

THE CONCEPT

Once your boat is in its cradle, sling, lift, or trailer, draining the bilge is easy with a garboard drain. All models install from the outside. TD-500 allows draining from outside by removing the square-drive plug. TD-750 (available in bronze or #316 SS) is drained by removing the T-handle from inside.

TD-500

SPECIAL PURPOSE TAIL PIECES THE CONCEPT TP and TPC series Tail Pieces are threaded with NPS (straight) female pipe thread, and are for use with GROCO SV series seacocks or with any product with straight male pipe thread. The use of TP and TPC series Tail Pieces on products with NPT (tapered) pipe thread is recommended only for low pressure applications, and then only with a generous application of pipe sealant or thread tape.

TP SERIES - STRAIGHT BRONZE TAIL PIECE MODEL NO.

DIMENSIONS

NPS PIPE SIZE

A

B

PKG

3/4"

2.13

3/4"

1

TP-750 TP-1000

1"

2.13

1"

1

TP-1250

1-1/4"

2.75

1-1/4"

1

TP-1500

1-1/2"

2.75

1-1/2"

1

TP-2000

2"

2.50

2"

1

TP-2500

2-1/2"

2.50

2-1/2"

1

TP

Straight Tail Piece

TPC SERIES - 90 BRONZE TAIL PIECE O

NPS PIPE SIZE

A

DIMENSIONS B

C

TPC-750

3/4"

2.75

3/4"

2.63

TPC-1000

1”

2.75

1"

2.38

1

TPC-1250

1-1/4"

2.50

1-1/4"

2.38

1

TPC-1500

1-1/2"

3.75

1-1/2"

2.75

1

TPC-2000

2"

3.75

2"

3.63

1

TPC-2500

2-1/2"

4.50

2-1/2"

4.50

1

MODEL NO.

PKG

1

TPC series 90° tail pieces are comprised of two pieces. The swivel may be rotated in any direction to facilitate ease of hook-up; then the nut is tightened.

BRONZE FITTINGS

2011

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

TPC

90° Tail Piece

GROCOy 31

219


PLUMBING & PUMPS

DRAIN MANIFOLD - RAW WATER MANIFOLD THE CONCEPT To reduce the number of above waterline hull openings in your boat we offer a simple way to plumb multiple 1/2" or 3/4" ID low pressure lines (sinks and showers for example) to a single above waterline overboard drain fitting. The exterior look is clean and attractive, while inside is a compact grouping of all connected hoses.

DM-5-1500 ■ ■ ■ ■ ■ ■

Manifold is threaded at the ends, so additional manifolds can be added. Includes bronze fittings for (5) 3/4" ID hose connections. Accepts any 1/2" NPT threaded valve or fitting. Exterior fitting is polished #316 Stainless Steel. Bonding attachment is included. Other sizes are available.

RWM SERIES - RAW WATER MANIFOLDS (PATENTED) THE CONCEPT While we do not recommend the practice of supplying raw or filtered water to multiple “consumers” from a single inlet source (ie: toilets, washdown pumps, air conditioners, generators, etc.) we do recognize that it is common practice to do so, particularly when one or more of the consumers is an intermittent consumer.

RWM Raw Water Manifold

If this is your intention, protect your equipment by installing a GROCO RWM Raw Water Manifold. You will be guided to use proper pipe or hose sizes, thus reducing the possibility of imposing dangerous restrictions to one or all of the consumers.

MODEL RWM-1250 RWM-1500 RWM-1500-1 RWM-2000 RWM-2000-1 RWM-2500 RWM-3000

220

GROCOy

The combined cross-sections of the primary consumer plus the threaded secondary consumer connections (to A/C and generator, for example) does not exceed the cross-section of the threaded inlet end.

▲ Sample Installation shows RWM Manifold used to distribute

Sample Installation shows RWM Manifold used to distribute filtered water

32

The barbed outlet is connected to the primary consumer (your main engine, for example) and is smaller than the threaded inlet which screws into a seacock or strainer outlet of the next larger pipe size (see sample installations). The larger threaded end requires that a larger strainer or inlet seacock be used, thus assuring adequate flow to all consumers.

raw

(unfiltered) water

PIPE

A

HOSE ID - B

C

PORT-D

PORT-E

1-1/4" NPT 1-1/2" NPT 1-1/2" NPT 2" NPT 2" NPT 2-1/2" NPT 3" NPT

3.75 4.13 4.13 4.65 4.65 5.00 5.50

1" 1-1/4" 1-1/4" 1-1/2" 1-1/2" 2" 2-1/2"

1.37 1.57 1.57 2.00 2.00 2.00 2.50

1/2" NPT 3/4" NPT 1/2" NPT 3/4" NPT 3/4" NPT 3/4" NPT 1" NPT

1/2" NPT 3/4" NPT 1" NPT 3/4" NPT 1” NPT 1" NPT 1-1/4" NPT

2011

PORT-F 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4"

NPT NPT NPT NPT NPT NPT NPT

BRONZE FITTINGS

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


PLUMBING & PUMPS

VALVES & SEACOCKS Flanged Full-Flow Safety Seacocks Flanged Full-Flow Seacocks In-Line Full-Flow Ball Valves Full-Flow Fuel Valves Full-Flow 3-Way Valves

SBV-P, SBV BV, FBV IBV, IBV-S, IBVF, IBVF-S FV Series TWV

SSC, SSCV Bilge Strainer BS, BSA

Engine Flush Kit

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

SEACOCKS & ACCESSORIES

2011

221 GROCOy 1


PLUMBING & PUMPS

2

GROCOy

222

2011

SEACOCKS & ACCESSORIES

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


PLUMBING & PUMPS

FULL-FLOW FLANGED BALL-TYPE SEACOCKS U.S. PATENT NO. 7,000,896

BV SERIES ■

■ ■

■ ■ ■ ■ ■ ■

Tri-flange base and mount hole pattern provide easy retrofit when replacing most popular brands. Patented selectable handle rotation Handle has square hole to accept standard ratchet, to help reach valves in hard-toreach locations and ease actuation of difficult to operate valves. Full pipe-size flow. Stainless steel ball and stem. PTFE seats and seals. Serviceable while installed. Drain Plug on both sides. Base has bonding attachment.

Listed 647B

MODEL

BOTTOM CONNECTION

TOP CONNECTION

A

B

C

D

BV-750 BV-1000 BV-1250 BV-1500 BV-2000 BV-2500 BV-3000 BV-4000 BV-5000

3/4" NPS 1" NPS 1-1/4" NPS 1-1/2" NPS 2" NPS 2-1/2" NPS 3" NPS 4" NPS 5" NPS

3/4" NPT 1" NPT 1-1/4" NPT 1-1/2" NPT 2" NPT 2-1/2" NPT 3" NPT 4" NPT 5" NPT

5.75 6.63 7.00 8.00 8.38 10.31 13.50 19.20 19.90

3.50 4.13 4.50 4.63 5.25 6.75 7.75 9.60 11.20

3.8 4.4 4.4 5.5 5.5 6.5 9.5 14.1 14.1

3.12 3.38 3.62 4.50 5.00 5.88 7.00 8.00 11.00

E

5/16 5/16 5/16 5/16 3/8 3/8 3/8 1/2 5/8

WEIGHT

PKG

2.3 3.5 4.6 6.0 10.0 13.0 24.0 52.0 91.0

1 1 1 1 1 1 1 1 1

FBV SERIES ■ Patented field reversible handle allows you

to select the closed position orientation (clockwise or counterclockwise) that best suits the installation. ■ Handle has square hole to accept standard ratchet, to help reach valves in hard-toreach locations and ease actuation of difficult to operate valves. ■ Full Pipe Size Flow ■ Triangular base with bolt pattern to match most popular brands makes retrofit easy. ■ Stainless steel handle and hardware. ■ Chrome plated solid brass ball. ■ PTFE Seats and Seals. ■ Bonding attachment on base. ■ Drain plugs on both sides. MODEL

N E WS SIZE

FBV-750 FBV-1000* FBV-1250 FBV-1500* FBV-2000 FBV-2500 FBV-3000

Listed 647B

BOTTOM CONNECTION

TOP CONNECTION

A

B

C

D

E

WEIGHT

PKG

3/4" NPS 1" NPS 1-1/4" NPS 1-1/2" NPS 2" NPS 2-1/2" NPS 3" NPS

3/4" NPT 1" NPT 1-1/4" NPT 1-1/2" NPT 2" NPT 2-1/2" NPT 3" NPT

6.14 6.98 7.12 8.23 10.14 12.81 14.85

3.92 4.40 4.85 5.77 7.53 7.75 9.02

2.40 2.60 2.70 3.15 3.54 4.21 6.99

3.12 3.38 3.62 4.50 5.00 5.88 7.00

5/16 5/16 5/16 5/16 3/8 3/8 3/8

1.9 2.6 3.0 4.4 6.2 14.3 23.2

2 2 2 2 2 1 1

*These sizes are available with locking handle. Order FBVL-1000 or FBVL-1500.

See page 26 of this section for details.

SEACOCKS & ACCESSORIES

2011

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

GROCOy 3

223


PLUMBING & PUMPS

FULL-FLOW FLANGED SAFETY SEACOCKS U.S. PATENT NO. 5,123,369

SBV SERIES

SBV FOR EMERGENCIES ■

Listed 647B ■

■ ■ ■ ■ ■ ■ SBV series has side port with Quick-Release Plug and Service Adaptor

BOTTOM PORT

MODEL

Handle has square hole that accepts standard ratchet; helps access hard-to-reach valves, or ease actuation of hard-tooperate valves. Side port has a Quick-Release plug for emergency bilge pumping, and a Service Adaptor for routine winterization and maintenance. Full pipe-size flow. Serviceable while installed. Stainless steel ball and stem. Base has bonding attachment. PTFE seats and seals. Two driver ports permit handle relocation Service adaptor included. TOP PORT

*SBV-1250 1-1/4” NPS 1-1/4” NPT SBV-1500 1-1/2” NPS 1-1/2” NPT SBV-2000 2” NPS 2” NPT SBV-2500 2-1/2” NPS 2-1/2” NPT SBV-3000 3” NPS 3” NPT * Round base model, this size only ** Refer to SBV-P drawing for dimension reference

SBV-P SERIES

Listed 647B

MODEL

BOTTOM PORT

SBV-1250-P 1-1/4” NPS *SBV-1500-P 1-1/2” NPS SBV-2000-P 2” NPS SBV-2500-P 2-1/2” NPS SBV-3000-P 3” NPS SBV-4000-P 4” NPS SBV-5000-P 5” NPS *Round base model, this size only 4

GROCOy

224

Emergency bilge pumping can be accomplished by closing the SBV and removing the Quick Release Plug while the engine is running. SBV FOR SERVICE

SIDE PORT

A

B

C

D

E

WEIGHT

SBVSA-1255 SBVSA-1505 SBVSA-2005 SBVSA-2505 SBVSA-3005

7.00 8.00 8.38 10.31 13.50

4.50 4.63 5.25 6.75 7.75

3.50 4.13 5.13 5.88 6.81

3.62 4.50 5.00 5.88 7.00

5/16 5/16 3/8 3/8 3/8

5.25 6.43 11.00 17.00 28.00

The purpose of the photo is to get your attention; we don’t really put two handles on a single valve. FEATURES ■ Two driver ports permit handle relocation. ■ NPT threaded side port accepts SSCV or any NPT threaded accessory. ■ Handle has square hole that accepts standard ratchet; helps access hard-to-reach valves, or ease actuation of hard-to-operate valves. ■ Full pipe size flow. ■ Serviceable while installed. ■ Stainless steel ball and stem. ■ Base has bonding attachment. ■ PTFE seats and seals. TOP PORT

SIDE PORT

SIDE ACCESSORY

A

B

1-1/4” NPT 1-1/2” NPT 2” NPT 2-1/2” NPT 3” NPT 4” NPT 5” NPT

1” NPT 1-1/4” NPT 1-1/2” NPT 2” NPT 2-1/2” NPT “3” NPT 4” NPT

SSCV-1000 SSCV-1250 SSCV-1500 SSCV-2000 SSCV-2500 SSCV-3000 SSCV-3000

7.00 8.00 8.38 10.31 13.50 19.20 19.86

4.50 4.63 5.25 6.75 7.75 9.60 11.19

2011

C

D

3.50 3.62 4.13 4.50 5.13 5.00 5.88 5.88 6.81 7.00 14.13 8.00 14.13 11.00

E

WEIGHT

5/16 5/16 3/8 3/8 3/8 1/2 5/8

5.25 6.43 11.00 17.00 28.50 56.00 90.00

SEACOCKS & ACCESSORIES

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


PLUMBING & PUMPS

IBV AND IBV-S

U.S. PATENT NO. 7,000,896

SEACOCKS & ACCESSORIES

2011

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

GROCOy 5

225


PLUMBING & PUMPS

SPECIAL PURPOSE VALVES FV-450-X - TANK SELECTOR VALVE

■ ■ ■ ■ ■ ■

For fuel or water. Four Positions: Tank-1, Tank-2, Tanks 1 & 2, Off. Full 1/2” flow. Audible “click” at each handle position. For thru panel mounting. Available separately or as part of TS-350-T Kit (below).

TS-350-T - TANK SELECTOR KIT TS-350-T Tank Selector Kit utilizes FV-450-X full flow valve (see above for details) mounted on an attractive stainless steel mount bracket and plumbed with (2) ½" straight hose barbs and (1) 7/16" 90-degree hose barb. Two labels are provided to match your installation (port/starboard tanks or fore/aft tanks). Handle can be relocated in 90-degree increments to align plumbing.

CV SERIES - CHECK VALVES CV Series in-line check valve may be used in water or fuel systems to keep pumps primed and to prevent back-flow in pressure systems. Unique design reduces flow turbulence and restriction, and improves pump performance. ■ ■ ■

8

GROCO®

226

Cast bronze construction NPT threaded ports 1/2" - 2" Sizes

Model

CV-50 CV-75 CV-100 CV-125 CV-150 CV-200

NPT Pipe Size

A

B

C

Weight

Pkg

1/2” 3/4” 1” 1-1/4” 1-1/2” 2”

1.42 1.65 1.90 2.38 2.93 3.63

2.45 2.58 3.30 3.98 4.34 5.00

1.00 1.20 1.45 1.88 2.23 2.75

0.4 0.5 0.8 1.4 2.3 3.2

1 1 1 1 1 1

2011

SEACOCKS & ACCESSORIES

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


PLUMBING & PUMPS

FULL-FLOW IN-LINE BALL VALVES U.S. PATENT NO. 7,000,896

IBV SERIES ■ ■

Listed 15PR

■ ■ ■ ■ ■ ■ ■

MODEL

IBV-250 IBV-375 IBV-500 IBV-750 IBV-1000* IBV-1250 IBV-1500* IBV-2000 IBV-2500 IBV-3000 IBV-4000

Patented selectable handle rotation. Handle has square hole to accept standard ratchet, to help reach valves in hard-to-reach locations and ease actuation of difficult to operate valves. 400 WOG rated. Full pipe size flow. Stainless steel handle and hardware. Chrome plated solid brass ball (not a hollow ball). PTFE seats and seals. Bonding attachment. UL listed for fuel. Fits IBVF (see page 9) for Seacock Application.

PIPE

A

B

C

D

E

WEIGHT

1/4” NPT 3/8” NPT 1/2” NPT 3/4” NPT 1” NPT 1-1/4” NPT 1-1/2” NPT 2” NPT 2-1/2” NPT 3” NPT” 4” NPT

1.77 1.77 2.05 2.33 2.79 3.18 3.60 4.30 4.88 6.87 8.20

4.48 4.48 5.10 5.15 5.93 6.54 7.62 9.13 10.00 10.75 12.00

1.99 1.99 2.26 2.27 2.48 2.65 3.20 3.59 4.40 4.75 6.00

1.08 1.08 1.14 1.26 1.47 1.71 1.88 2.17 2.60 3.00 4.00

7.55 7.58 8.05 9.38 10.85 12.81 14.85 -

0.48 0.46 0.74 1.00 1.70 2.24 3.28 4.56 10.40 17.54 29.80

*Available with locking handle. Order IBVL-1000 or IBVL-1500.

NEW SIZE

IBV-S SERIES ■

■ Listed 15PR ■ ■ ■ ■ ■ ■ ■ ■ MODEL

IBV-250-S IBV-375-S IBV-500-S IBV-750-S IBV-1000-S IBV-1250-S IBV-1500-S IBV-2000-S IBV-2500-S IBV-3000-S IBV-4000-S

Handle has square hole to accept standard ratchet (helps you to reach hard-to-reach valves and eases actuation of hard to operate valves). Handle has thumb-release locking mechanism to ensure the valve remains in the open or closed position you have selected until you wish to change it. 1000 WOG rated. #304 SS handle and trim. #316 SS body. Bonding attachment. PTFE seats and seals. Full flow. UL listed for fuel. Fits IBVF-S (see page 9) for Seacock Application.

PIPE

A

B

C

D

E

WEIGHT

1/4” NPT 3/8” NPT 1/2” NPT 3/4” NPT 1” NPT 1-1/4” NPT 1-1/2” NPT 2” NPT 2-1/2” NPT 3” NPT 4” NPT

2.20 2.20 2.48 2.98 3.30 3.86 4.25 4.75 6.32 7.33 8.82

3.92 3.92 3.92 4.98 4.98 6.02 6.02 7.56 9.76 9.76 12.60

1.83 1.83 1.90 2.43 2.73 3.18 3.43 3.76 4.70 5.12 6.58

0.61 0.61 1.28 1.38 1.60 1.80 2.07 2.40 2.75 4.00 -

8.17 8.33 9.65 9.90 11.66 15.27 15.83 -

0.61 0.57 0.66 1.28 1.57 2.71 3.34 5.45 10.34 21.60 -

*Sizes 3/4"- 3" include drain plug 6

GROCOy

2011

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

SEACOCKS & ACCESSORIES

227


PLUMBING & PUMPS

SPECIAL PURPOSE VALVES Three-Way Valve ■

■ ■ ■ ■ ■ ■ ■

TWV SERIES

3-way valve operates logically The handle points to the direction of flow. Center position is off . Handle Rotates a full 180. Mount foot included. Full flow. Stainless steel handle and hardware. PTFE seats and seals. TWV-1500 size is ideal for waste systems. UL listed for fuel.

Listed 15PR

MODEL

NPT

A

B

C

D

WEIGHT

PKG

TWV-500 TWV-750 TWV-1500

1/2" 3/4" 1-1/2"

4.10" 4.10" 6.00"

2.12" 2.20" 3.30"

1.90" 1.93" 3.15"

2.40" 2.44" 3.95"

1.08 1.24 5.60

2 2 1

Fuel Valve

FV SERIES

PATENT NO. 7,000,896

ABYC H33.9.2 states that fuel system valves must have an independent means of support. That’s why regular in-line valves are not appropriate for fuel systems applications. ■ ■ ■ ■ ■ ■ ■

Listed 15PR

Patented selectable handle rotation. Full flow. Mount foot included. Stainless steel handle and hardware. 400 WOG. PTFE seats and seals. UL Listed for fuel.

MODEL

NPT

A

B

C

D

WEIGHT

PKG

FV-250 FV-375 FV-500 FV-750

1/4" 3/8" 1/2" 3/4"

4.10" 4.10" 4.10" 4.10"

2.22" 2.22" 2.20" 2.22"

1.54" 1.54" 1.85" 2.10"

1.77" 1.77" 2.05" 2.33"

.52 .50 .82 1.06

16 16 16 10

90-Degree Fuel Valve

FV-590 SERIES

Compact design.

90 Degree flow path.

1/2” NPT male and female ports.

Use FV-590 for fiberflass tanks.

Use FV-590-S with Aluminum or stainless steel tanks.

FV-590

6-PORT FUEL VALVES

Six-port fuel valves are used where 2 tanks supply a single engine, and a return to each supply tank is required. ABYC H33.9.2 states that fuel system valves must have an independent means of support, so in-line valves are not suitable for fuel system applications. FV-65038 and FV-61075 has a "L" shaped flow pattern and 180-degree handle swing; FV-65038-A and FV-61075-A has a "T" shaped flow pattern and 360-degree handle actuation. MODELS

MAIN NPT

RETURN NPT

A

B

C

D

E

F

FV-65038 FV-65038-A FV-61075 FV-61075-A

1/2" 1/2" 1" 1"

3/8" 3/8" 3/4" 3/4"

5.62 5.62 8.42 8.42

2.31 2.31 3.47 3.47

2.23 2.23 3.34 3.34

2.78 2.78 4.17 4.17

2.06 2.06 3.09 3.09

1.25 1.25 1.88 1.88

SEACOCKS & ACCESSORIES

228

FV-590-S

2011 Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

GROCOy 7


PLUMBING & PUMPS

SPECIAL PURPOSE VALVES FV-450-X - TANK SELECTOR VALVE

■ ■ ■ ■ ■ ■

For fuel or water. Four Positions: Tank-1, Tank-2, Tanks 1 & 2, Off. Full 1/2” flow. Audible “click” at each handle position. For thru panel mounting. Available separately or as part of TS-350-T Kit (below).

TS-350-T - TANK SELECTOR KIT TS-350-T Tank Selector Kit utilizes FV-450-X full flow valve (see above for details) mounted on an attractive stainless steel mount bracket and plumbed with (2) ½" straight hose barbs and (1) 7/16" 90-degree hose barb. Two labels are provided to match your installation (port/starboard tanks or fore/aft tanks). Handle can be relocated in 90-degree increments to align plumbing.

CV SERIES - CHECK VALVES CV Series in-line check valve may be used in water or fuel systems to keep pumps primed and to prevent back-flow in pressure systems. Unique design reduces flow turbulence and restriction, and improves pump performance. ■ ■ ■

8

GROCO®

Cast bronze construction NPT threaded ports 1/2" - 2" Sizes

Model

CV-50 CV-75 CV-100 CV-125 CV-150 CV-200

NPT Pipe Size

A

B

C

Weight

Pkg

1/2” 3/4” 1” 1-1/4” 1-1/2” 2”

1.42 1.65 1.90 2.38 2.93 3.63

2.45 2.58 3.30 3.98 4.34 5.00

1.00 1.20 1.45 1.88 2.23 2.75

0.4 0.5 0.8 1.4 2.3 3.2

1 1 1 1 1 1

2011 Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

SEACOCKS & ACCESSORIES

229


PLUMBING & PUMPS

FLANGED ADAPTORS

U.S. PATENT NO. 7,530,370

IBVF AND IBVF-S SERIES THE CONCEPT Patented IBVF Flanged Adaptors have been developed to address several ageold problems in the marine industry. Here’s what they do: ■

Eliminate common (and dangerous) thread mis-match when in-line valves are screwed onto thru hulls.

Accept standard thru-hulls into the base and standard in-line valves or other components on top.

Provide a safe and sturdy assembly when in-line valves are used as seacocks.

For OEMs, prevent valve damage during engine or generator installation the valve can be installed later.

Make future valve replacement a simple job.

Bronze and #316 SS models.

BRONZE MODELS

IBVF-750 IBVF-1000 IBVF-1250 IBVF-1500 IBVF-2000 IBVF-2500 IBVF-3000

#316 SS MODELS

IBVF-750-S IBVF-1000-S IBVF-1250-S IBVF-1500-S IBVF-2000-S IBVF-2500-S IBVF-3000-S

A NPT

B NPS

C

D

3/4" 3/4" 2.09 3.12 1" 1" 2.18 3.38 1-1/4" 1-1/4" 2.18 3.62 1-1/2" 1-1/2" 2.18 4.50 2" 2" 2.18 5.00 2-1/2" 2-1/2" 3.20 5.88 3" 3" 3.51 7.00

E

WT. BRONZE

WT. SS

PKG

5/16" 5/16" 5/16" 5/16" 5/16" 3/8" 3/8"

1.05 1.07 1.20 1.69 2.04 3.8 5.8

.96 .98 1.10 1.54 1.86 3.5 5.3

1 1 1 1 1 1 1

IMPROVED INSTALLATION

COMMON INSTALLATION

SEACOCKS & ACCESSORIES

230

2011 Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

GROCO® 9


PLUMBING & PUMPS

SEACOCK SYSTEMS TOP CONNECTION: CHOOSE STANDARD FLOW (PTH) OR FULL FLOW (FF) CONNECTIONS PTH

PTHC

PTHD

FF

FFC

VALVE: CHOOSE BV OR FBV BV

FBV

MADE IN USA

IMPORTED

BOTTOM CONNECTION: CHOOSE TH OR STH TH-W

STH-W

If you already know the components you need, order a seacock system. You’ll have just one part number to specify, plus there are no standard package quantities to deal with. These combinations are available. Contact GROCO for other combinations. TOP SIZES

MODEL

626-XXXX-00 627-XXXX-00 628-XXXX-00 629-XXXX-00 630-XXXX-00 631-XXXX-00 632-XXXX-00 633-XXXX-00 *634-XXXX-00 *635-XXXX-00 *636-XXXX-00 *637-XXXX-00 *645-XXXX-00 *646-XXXX-00 *647-XXXX-00 *648-XXXX-00 653-XXXX-00 654-XXXX-00 655-XXXX-00 656-XXXX-00 XXXX = PIPE SIZE 10

GROCO®

3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4" 3/4"

-

5" 5" 3" 3" 2" 2" 2" 2" 3" 3" 3" 3" 2" 2" 2" 2" 3" 3" 2" 2"

SEACOCK CONNECTION

HULL SERIES

CONNECTION

PTH PTHC FF FFC PTH PTHC FF FFC PTH PTHC FF FFC PTH PTHC FF FFC PTHD PTHD PTHD PTHD

BV BV BV BV BV BV BV BV FBV FBV FBV FBV FBV FBV FBV FBV FBV BV FBV BV

TH-W TH-W TH-W TH-W STH-W STH-W STH-W STH-W TH-W TH-W TH-W TH-W STH-W STH-W STH-W STH-W TH-W TH-W STH-W STH-W

629-SERIES

e.g: 2500 = 2-1/2" and 3/4” = 0075

2011

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

SEACOCKS & ACCESSORIES

231


PLUMBING & PUMPS

ENGINE FLUSH KITS and SAFETY SEACOCK CONVERSIONS SSC SERIES

THE CONCEPT Add SSC to the top of any seacock to allow instant emergency bilge pumping, or to simplify winterization and cooling system flushing. Add a GROCO Bilge Strainer (see BS Series on Page 30) to pump out remote bilge locations. IN AN EMERGENCY: While the connected engine is running, close the seacock and remove the quick release plug. Excess bilge water will be pumped overboard by the engine raw water pump. Add GROCO BSA (see page 12) to pump out remote bilge locations. FOR WINTERIZATION: Close the seacock, remove the quick release plug and insert the service adaptor (included). Anti-freeze can be pumped into the cooling system.

SSC Engine Flush Kit w/Service Adaptor

FOR SYSTEM FLUSHING: Close the seacock and insert the service adaptor. Dockside water can be used to flush the cooling system with the engine running at idle speed. SSC FOR EMERGENCIES

SSC FOR SERVICE

(SSC INCLUDES SERVICE ADAPTOR)

ANY MODEL SEACOCK

Emergency bilge pumping allows high bilge water to be drawn through open side port and pumped overboard through engine exhaust system.

NOTE: SSC may also be installed after the strainer, See SSCV below.

SSCV SERIES

THE CONCEPT SSCV is the SSC (above) combined with a Full Flow In-Line IBV Series ball valve, which isolates the plumbing before SSC and prevents back-flushing into the strainer or through the seacock. FOR WINTERIZATION: Close the seacock, remove the quick release plug and insert the service adaptor (included). Anti-freeze can be pumped into the cooling system. FOR SYSTEM FLUSHING: Close the seacock and insert the service adaptor. Dockside water can be used to flush the cooling system with the engine running at idle speed.

SSCV FOR SERVICE

SSCV FOR EMERGENCIES (SSCV INCLUDES SERVICE ADAPTOR)

GROCO GROCO

OPTIONAL BSA KIT INCLUDES BILGE STRAINER, PIPE-TO-HOSE ADAPTOR AND SSC ADAPTOR

MODEL*

HOSE ID

NPT

SSC LENGTH

SSCV LENGTH

SSC WEIGHT

SSCV WEIGHT

SSC PKG

SSCV PKG

SSCV-750 SSCV-1000 SSCV-1250 SSCV-1500 SSCV-2000 SSCV-2500 SSCV-3000

3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3"

3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3"

3.90" 4.35" 4.55" 4.75" 5.20" 5.85" 6.32"

5.79" 6.56" 7.02" 7.78" 9.13" 12.00" 14.50"

.65# .90# 1.05# 1.45# 2.20# 4.80# 5.50#

1.65 2.66 3.29 4.76 6.98 15.20 23.25

2 2 2 2 2 1 1

1 1 1 1 1 1 1

*If ordering SSC drop “V” from model number.

SEACOCKS & ACCESSORIES

232

2011

GROCO® 11

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


PLUMBING & PUMPS

BS SERIES - BILGE STRAINERS USE WITH SBV-P OR SSC

BS SERIES THE CONCEPT BS series strainers provide coarse filtration and prevent large debris in the bilge from entering bilge pumps. The NPT thread is for use with straight or 90o bronze pipe to hose adaptors. BS series is ideal for use with GROCO SBV-P Safety Seacocks or SSC Engine Flush Kit.

Bilge Strainer

MODEL

NPT SIZE

A

B

C

USE WITH SBV-P

USE WITH SSC

PKG

BS-750 BS-1000 BS-1250 BS-1500 BS-2000 BS-2500 BS-3000

3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3"

1.88" 1.88" 3.40" 3.40" 5.25" 5.25" 5.25"

2.13" 2.13" 3.63" 3.63" 3.63" 3.63" 3.63"

2.00" 2.00" 2.00" 2.00" 2.00" 2.00" 2.00"

SBV-1250-P SBV-1500-P SBV-2000-P SBV-2500-P SBV-3000-P SBV-4000-P

SSC-750 SSC-1000 SSC-1250 SSC-1500 SSC-2000 SSC-2500 SSC-3000

1 1 1 1 1 1 1

BSA SERIES - BILGE STRAINER ADAPTOR KIT USE WITH SBV, SSC OR SSCV

The adaptor fits into the side port of an SBV Safety Seacock or an SSC Engine Flush Kit to provides a quick connection to a remote bilge strainer located in the deepest bilge area. A 90-degree low profile pipe-to-hose adaptor is included. MODEL

Bilge Strainer and Adaptor for SBV or SSC

BSA-750 BSA-1000 BSA-1250 BSA-1500 BSA-2000 BSA-2500 BSA-3000

FITS SBV MODEL

FITS SSC MODEL

SBV-1250 SBV-1500 SBV-2000 SBV-2500 SBV-3000

SSC-750 SSC-1000 SSC-1250 SSC-1500 SSC-2000 SSC-2500 SSC-3000

PKG

1 1 1 1 1 1 1

BSA AND SSC FOR EMERGENCY INSTALLATION

12

GROCO®

2011

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

SEACOCKS & ACCESSORIES

233


PLUMBING & PUMPS

RAW WATER STRAINERS Raw Water Monitor Inboard Strainers Hull Strainers Self-Clean Strainers Bilge Strainers

SSA ARG, SA, SD, SE, VD APHS, ASC, RSC, SC Hydromatic TM BS, BSA

Seacock/Strainer Combo

BVS

Pump-Inlet Strainer

WSB

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

234

RAW WATER STRAINERS

2011

GROCO® 13


PLUMBING & PUMPS

STRAINER SERVICE ADVICE U.S. PATENT NO. 7,491,320

THE CONCEPT SSA is a patented system that alerts the vessel operator visually and audibly to the significant reduction of raw water flow to any connected device. You are alerted faster than traditional gauges or sensors (about 7 seconds) – fast enough to allow you to react and investigate – fast enough to prevent damage BEFORE it occurs.

SSA-1G-XXXX XXXX = SENSOR HOSE ID SENSOR ASSEMBLY

The housing accepts GROCO's SBVSA-1505 service adaptor for system flushing and winterization.

SSA-4 SAMPLE INSTALLATION

HOW IT WORKS Sensors, sizes 5/8” to 6”, installed in each raw water line send flow data to the processor, and each device sends an "on" signal when it is operating. If flow to any of the devices falls below calibrated “normal” you are alerted audibly, and an LED identifies the device requiring maintenance or service.

SSA-4B is for the serious tournament fishing boat with up to 4 livewells. Flow to each livewell is monitored. In an emergency the sensor can be removed from the bronze housing to allow systems to pump water out of a flooded bilge.

MODEL

MAX DEVICES CONNECTED

DEVICE DESCRIPTION

INDICATOR

NMEA2000

SSA-1G

1

Propulsion Engine

2-5/8" Gauge

N/A

SSA-3

3

1 engine, 1 generator, 1 air conditioner

Touchpad

Coming Soon

SSA-4

4

Up to 2 engines and up to 2 AC or DC pumps

Touchpad

Coming Soon

SSA-4B

4

Up to 4 AC or DC baitwell pumps

Touchpad

Coming Soon

SSA-7

7

Up to 3 Engines, up to 4 AC or DC pumps

Touchpad

Coming Soon

14

GROCO®

2011

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

RAW WATER STRAINERS

235


PLUMBING & PUMPS

STRAINER SERVICE ADVICE U.S. PATENT NO. 7,491,320

HOW TO DESIGN YOUR SYSTEM Step-1: Select the Touchpad. Your selection identifies how many devices you will connect and what the devices are.

Touchpad #31 Engine, AC, Gen

Touchpad #41 Engine, Engine, AC, Gen

Touchpad #43 4 AC or 4 DC Pumps

Touchpad #71 Engine, Engine, AC, AC, AC, Gen, Gen

Touchpad #72 Engine, Engine, AC, AC, Gen, Gen, R/O or Refrigeration

Touchpad #73 Engine, Engine, AC, AC, AC, Gen, R/O or Refrigeration

After Step-1: Sample System Part Number = SSA41- _ _ _ _ - _ Step-2: Select Sensor Plumbing Code from chart below to match existing plumbing (specify in alphabetic order). SENSOR

HOSE ID

PLUMBING CODE

SSA-625-HH SSA-750-HH SSA-1000-HH SSA-1250-HH SSA-1500-HH SSA-2000-HH SSA-2500-HH SSA-3000-HH SSA-4000-HH SSA-5000-HH SSA-6000-HH

5/8" 3/4” 1” 1-1/4” 1-1/2” 2” 2-1/2” 3” 4” 5” 6”

W B D F H K M P R T V

SENSOR

SSA-750-PP SSA-1000-PP SSA-1250-PP SSA-1500-PP SSA-2000-PP SSA-2500-PP SSA-3000-PP SSA-4000-PP SSA-5000-PP SSA-6000-PP

NPT

PLUMBING CODE

3/4” 1” 1-1/4” 1-1/2” 2” 2-1/2” 3” 4” 5” 6”

A C E G J L N Q S U

DIMENSIONS Y Z

4.8 4.8 4.8 4.8 5.2 5.2 5.2 5.2 -

2.0 2.0 2.2 2.3 2.4 2.7 2.9 3.0 -

SENSOR ASSEMBLY

After Step-2: Sample System Part Number = SSA41- B D K K - _ Step-3: Identify the source of engine(s) RPM signal. Monitoring a propulsion engine requires an RPM signal. RPM data can be obtained from either of 3 sources, the source becomes the final number in the system part number.

Choose suffix -1 if you will obtain RPM from a helm-mounted analog tachometer. Choose suffix -2 if you will obtain RPM from the signal generator on each engine. Choose suffix -3 if you will obtain RPM from the engine J1939 connector or ECU. After Step 3: Completed Sample System Part Number = SSA41- B D K K - 1 Example Part Number Components:

SSA41- B D K K -1

Touchpad for 2 Engines, 1 AC and 1 Gen Sensor Assembly fits 3/4” ID hose Sensor Assembly fits 1” ID hose Sensor Assembly fits 2” ID hose Sensor Assembly fits 2” ID hose RPM signal obtained from helm mounted tach More Examples:

SSA73 -B B B D D K K - 3

SSA31- B B L - 2

Touchpad for 2 Engines, 3 AC, 1 Gen and 1 RO Sensor Assembly fits 3/4” ID hose Sensor Assembly fits 3/4” ID hose Sensor Assembly fits 3/4” ID hose Sensor Assembly fits 1” ID hose Sensor Assembly fits 1” ID hose Sensor Assembly fits 2” ID hose Sensor Assembly fits 2” ID hose RPM signal obtained from J1939 connection

Touchpad for 1 Engine, 1 AC and 1 Gen Sensor Assembly fits 3/4” ID hose Sensor Assembly fits 3/4” ID hose Sensor Assembly fits 2-1/2” NPT RPM signal obtained from engine tach signal gen

RAW WATER STRAINERS

236

2011

GROCO® 15

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


PLUMBING & PUMPS

Go to www.groco.net for updates, applications, and servicing information. 16

GROCO®

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

2011

RAW WATER STRAINERS

237


PLUMBING & PUMPS

ARG SERIES FEATURES ■ Bronze or stainless steel castings. ■ No tie rods or gaskets. ■ O-rings seal all mating surfaces. ■ Easy service with screw-on cap. ■ Mounting hardware is included.

Listed 255D

■ Bonding connection. ■ #304 stainless steel filter basket is standard.

Optional Non-metallic or Monel baskets are available.

ARG-500 THRU ARG-1250 PRESSURE DROP CURVE

ARG-S SERIES

ARG SERIES

(#316 SS Castings)

(Bronze Castings)

ARG-1500 THRU ARG-3000 PRESSURE DROP CURVE

BRONZE MODELS

#304-SS Basket

ARG-500-S ARG-755-S ARG-750-S ARG-1000-S ARG-1210-S ARG-1250-S ARG-1500-S ARG-2015-S ARG-2000-S ARG-2515-S ARG-2520-S ARG-2500-S ARG-3015-S ARG-3020-S ARG-3025-S ARG-3000-S

Non-Metallic Basket

Monel Basket

Pipe Size

A

B

C

D

E

F

G

Weight

Ratio*

Pkg

ARG-500-P ARG-755-P ARG-750-P ARG-1000-P ARG-1210-P ARG-1250-P ARG-1500-P ARG-2015-P ARG-2000-P ARG-2515-P ARG-2520-P ARG-2500-P ARG-3015-P ARG-3020-P ARG-3025-P ARG-3000-P

ARG-500 ARG-755 ARG-750 ARG-1000 ARG-1210 ARG-1250 ARG-1500 ARG-2015 ARG-2000 ARG-2515 ARG-2520 ARG-2500 ARG-3015 ARG-3020 ARG-3025 ARG-3000

1/2" 3/4" 3/4" 1" 1-1/4" 1-1/4" 1-1/2" 2" 2" 2-1/2" 2-1/2" 2-1/2" 3" 3" 3" 3"

6.38 6.38 8.38 9.00 9.19 10.63 11.38 12.00 14.00 12.70 14.64 17.00 13.25 15.19 17.37 19.75

4.50 4.50 4.50 5.75 5.75 5.75 7.25 7.25 7.25 7.25 7.25 7.25 7.25 7.25 7.25 7.25

5.25 5.25 5.25 6.50 6.50 6.50 7.75 7.75 7.75 7.75 7.75 7.75 7.75 7.75 7.75 7.75

1.50 1.50 1.50 2.00 2.00 2.25 2.50 2.75 2.75 3.11 3.11 3.11 3.51 3.51 3.51 3.51

1.00 1.00 1.00 1.13 1.13 1.13 -

1.07 1.07 1.07 1.19 1.19 1.19 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00

3.50 3.50 5.50 5.88 5.88 7.88 6.50 6.50 8.00 7.75 8.00 10.00 6.50 8.00 10.00 12.00

3.50 3.50 3.70 5.75 6.10 6.40 9.60 11.10 12.20 13.50 13.50 14.15 15.00 15.75 16.50 17.25

54 54 36 28 18 24 20 11 14 7 9 11 5 6 8 9

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

6.38 6.38 8.38 9.00 9.19 10.63 11.38 12.00 14.00 12.70 14.64 17.00 13.25 15.19 17.37 19.75

4.50 4.50 4.50 5.75 5.75 5.75 7.25 7.25 7.25 7.25 7.25 7.25 7.25 7.25 7.25 7.25

5.25 5.25 5.25 6.50 6.50 6.50 7.75 7.75 7.75 7.75 7.75 7.75 7.75 7.75 7.75 7.75

1.50 1.50 1.50 2.00 2.00 2.25 2.50 2.75 2.75 3.11 3.11 3.11 3.51 3.51 3.51 3.51

1.00 1.00 1.00 1.13 1.13 1.13 -

1.07 1.07 1.07 1.19 1.19 1.19 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.00

3.50 3.50 5.50 5.88 5.88 7.88 6.50 6.50 8.00 7.75 8.00 10.00 6.50 8.00 10.00 12.00

3.50 3.50 3.70 5.75 6.10 6.40 9.60 11.10 12.20 13.50 13.50 14.15 15.00 15.75 16.50 17.25

54 54 36 28 18 24 20 11 14 7 9 11 5 6 8 9

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

S TA I N L E S S ARGS-500-S ARGS-755-S ARGS-750-S ARGS-1000-S ARGS-1210-S ARGS-1250-S ARGS-1500-S W NE ES ARGS-2015-S SIZ ARGS-2000-S ARGS-2515-S ARGS-2520-S ARGS-2500-S ARGS-3015-S ARGS-3020-S ARGS-3025-S ARGS-3000-S

STEEL ARGS-500-P ARGS-755-P ARGS-750-P ARGS-1000-P ARGS-1210-P ARGS-1250-P ARGS-1500-P ARGS-2015-P ARGS-2000-P ARGS-2515-P ARGS-2520-P ARGS-2500-P ARGS-3015-P ARGS-3020-P ARGS-3025-P ARGS-3000-P

MODELS ARGS-500 ARGS-755 ARGS-750 ARGS-1000 ARGS-1210 ARGS-1250 ARGS-1500 ARGS-2015 ARGS-2000 ARGS-2515 ARGS-2520 ARGS-2500 ARGS-3015 ARGS-3020 ARGS-3025 ARGS-3000

1/2" 3/4" 3/4" 1" 1-1/4" 1-1/4" 1-1/2" 2" 2" 2-1/2" 2-1/2" 2-1/2" 3" 3" 3" 3"

"Ratio" means the ratio of open filter basket area to cross-sectional pipe area.

RAW WATER STRAINERS

238

2011 Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

GROCO® 17


PLUMBING & PUMPS

SD-S SERIES - HIGH CAPACITY STRAINER FEATURES ■ ■

Listed 255D

■ ■ ■ ■

Improved cylindrical filter basket Improved design secures filter basket under all flow conditions. Greater filtering capacity than GROCO ARG or SA model strainers. O-Rings seal all mating surfaces. Monel inside tie rod. Easy service is provided by the spin-off wingnut.

SD-S SERIES (#304 SS BASKET) SD Series (Monel Basket) #304 SS BASKET

MONEL BASKET

PIPE SIZE

A

B

C

D

WEIGHT

RATIO*

PKG

SD-1500-S SD-2000-S SD-2500-S SD-3000-S

SD-1500 SD-2000 SD-2500 SD-3000

1-1/2" NPT 2" NPT 2-1/2" NPT 3" NPT

14.50 17.00 20.38 22.38

3.75 3.63 4.38 4.50

1.25 1.25 .25 .25

11.50 14.00 16.00 18.00

24.00# 26.00# 36.00# 38.00#

36:1 22:1 16:1 13:1

1 1 1 1

"Ratio" means the ratio of open filter basket area to cross-sectional pipe area. Stainless steel or Monel filter baskets have .077" (2mm) holes.  Add suffix "FM" for 60-mesh fine-mesh filter basket insert. Other mesh counts are available by special order.  For ABS compliance add prefix "A" to specify #316 stainless steel enclosure to replace plastic sight glass. (ie: ASD-3000-S)  

BVS SERIES - BALL VALVE / STRAINER COMBINATION Square hole in handle accepts standard ratchet. Space saving design with strainer and integral seacock. Just one component to install and just one bilge location to access for winterization and maintenance. No inside tie rods. Full flow ball valve with stainless steel ball and stem. Strainer has screw on/off cap #304 stainless steel filter basket.

■ ■ ■

■ ■ ■ ■

BVS SERIES MODEL

BVS-750 BVS-1000 BVS-1250 BVS-1500

PIPE SIZE

A

B

C

D

E

F

G

WEIGHT

RATIO*

PKG

3/4" 1" 1-1/4" 1-1/2"

10.75 11.25 14.88 15.00

10.13 10.25 14.00 13.75

3.05 4.13 4.13 5.25

5.38 6.50 6.50 8.00

4.75 6.25 6.25 8.00

3.83 4.35 4.35 5.50

2.50 3.50 3.50 4.50

6.75# 11.33# 11.75# 16.75#

33:1 27:1 26:1 19:1

1 1 1 1

"Ratio" means the ratio of open filter basket area to cross-sectional pipe area. Filter baskets have .077" (2mm) holes.  Add suffix "FM" for 60-mesh fine-mesh filter basket insert. Other mesh counts are available by special order.  

18

GROCO®

2011

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

RAW WATER STRAINERS

239


PLUMBING & PUMPS

SA-S SERIES FEATURES Standard with #304 stainless steel filter basket. Monel is optional. Monel Inside Tie Rod. Easy Service with spin-off wingnut Fine-mesh filter basket available.

■ ■ ■ ■

Listed 255D SA-S SERIES #304 SS Basket

SA-500-S SA-750-S SA-1000-S SA-1250-S SA-1500-S SA-2000-S SA-2500-S SA-3000-S     

Monel Basket

PIPE SIZE

A

B

C

D

E

F

WEIGHT

RATIO*

PKG

SA-500 SA-750 SA-1000 SA-1250 SA-1500 SA-2000 SA-2500 SA-3000

1/2" NPT 3/4" NPT 1" NPT 1-1/4" NPT 1-1/2" NPT 2" NPT 2-1/2" NPT 3" NPT

7.75 9.63 10.50 12.75 13.75 16.50 18.75 21.50

2.25 2.25 2.75 2.75 3.25 3.50 3.75 4.00

4.00 4.00 5.00 5.00 6.25 6.25 6.25 6.25

1.75 1.75 1.88 1.88 2.63 2.75 3.38 3.25

.75 .75 1.00 1.00 1.00 1.38 1.38 1.38

6.00 7.88 8.62 10.88 11.12 13.75 15.38 18.25

4.15# 4.40# 6.92# 7.65# 12.25# 16.20# 18.40# 21.25#

54:1 36:1 29:1 25:1 20:1 14:1 11:1 9:1

1 1 1 1 1 1 1 1

"Ratio" means the ratio of open filter basket area to cross-sectional pipe area.

Model numbers listed above are standard #304 stainless steel filter basket. Drop suffix "S" for Monel. Stainless steel and Monel filter baskets have .077" (2mm) holes. Add suffix "FM" for 60-mesh fine-mesh filter basket insert. Other mesh counts are available by special order. For ABS standards compliance add prefix "A" to specify #316 stainless steel enclosure to replace the plastic sight glass (ie: ASA-1000).

WSB SERIES - PUMP INLET STRAINERS ■ ■

■ ■ ■ ■

Protect fresh water pumps from debris. White Nylon strainer head and clear plastic sight glass. Glass unscrews for filter basket cleaning. Mount bracket included. Use WSB for fresh water systems (#304 SS Basket). Use WSB-P for salt-water use. Use WSB-P for continuous duty AC or genset.

WSB SERIES #304 SS BASKET

WSB-P SERIES NON-METALLIC BASKET

40-MESH #304 SS

NONMETALLIC

NPT

A

B

WEIGHT

PKG

WSB-500

WSB-500-P

1/2"

5.00

2.90

.38

4

WSB-750

WSB-750-P

3/4"

5.00

2.90

.40

4

WSB-1000

WSB-1000-P

1"

6.25

4.00

.90

6

WSB-1250

WSB-1250-P

1-1/4"

7.00

4.00

1.10

6

RAW WATER STRAINERS

240

2011

GROCO® 19

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


PLUMBING & PUMPS

VERTICAL DUPLEX WATER STRAINERS 932 SERIES THE CONCEPT For equipment that must run continuously, 932 Series Vertical Duplex Raw Water Strainers represent the latest in dual strainer design. An integral valve enables the user to select which strainer is in service, enabling the other strainer to be serviced without shutting down the equipment. ■ No Tie Rods or Gaskets ■ Easy service with screw-on cap ■ 304 SS baskets are standard; Monel basket is available. MODEL

PIPE SIZE

A

B

C

D

E

F

WEIGHT

RATIO

932-0500-00

1/2"

-

-

-

-

-

-

-

54:1

932-0750-00

3/4"

-

-

-

-

-

-

-

36:1

932-1000-00

1"

9.38

13.5

6.5

5.75

2.5

3.25

-

28:1

932-1250-00 932-1500-00 932-2000-00

1-1/4" 1-1/2" 2"

11.0 12.8 14.7

13.5 17.2 17.2

6.5 10.2 10.2

5.75 7.9 7.9

2.5 3.88 3.88

3.25 5.1 5.1

-

24:1 20:1 14:1

932-2500-00

2-1/2"

20.0

17.5

12.6

8.8

5.5

5.1

-

11:1

932-3000-00

3"

20.0

17.5

12.6

8.8

5.5

6.3

116#

9:1

932 Series Performance Chart (right) shows estimated pressure drop information calculated from product proto-types. Consult GROCO for up-to-date information.

VD-S SERIES THE CONCEPT When engines or other connected equipment must run continuously, filter basket cleaning is made possible by the dual strainer design. An integral valve located between the strainers directs the flow to one filter chamber or the other. The in-use filter continues to protect your equipment while the filter not in use may be serviced. #304 stainless steel filter baskets are standard; Monel filter baskets and fine mesh baskets are optional.

• Ratio means the ratio of open filter basket area to cross-sectional pipe area • For compliance with ABS standards add prefix "A" to specify #316 stainless steel enclosure in place of the plastic sight glass (ie: AVD-1000-S) • Add suffix "FM" for 60-mesh fine mesh filter basket insert. Other mesh count are available by special order.

20

#304 SS BASKET

MONEL BASKET

PIPE SIZE NPT

A

B

C

D

E

F

WEIGHT

RATIO

VD-1000-S VD-1250-S VD-1500-S VD-2000-S VD-2500-S

VD-1000 VD-1250 VD-1500 VD-2000 VD-2500

1" 1-1/4" 1-1/2" 2" 2-1/2"

10.00 12.00 14.50 16.50 17.50

13.00 13.00 16.00 16.00 17.50

6.75 6.75 8.00 8.00 8.00

2.63 2.63 3.63 3.63 3.63

3.50 3.50 6.50 6.50 7.75

3.25 3.25 5.1 5.1 5.1

22# 21# 46# 47# 54#

30:1 25:1 19:1 14:1 11:1

GROCO®

2011

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

RAW WATER STRAINERS

241


PLUMBING & PUMPS

SE SERIES

LARGE ENGINE STRAINERS MODEL SE

FEATURES

WITH NPT THREADED PORTS (4" ONLY)

■ For high-powered engines with

4", 5" or 6" intake.

■ Cap and basket have replaceable

zinc anode protection.

■ Low restriction for maximum

cooling water flow.

■ No inside tie rods. ■ Cover unscrews for easy filter ■ ■

■ ■

■ ■

basket cleaning. O-rings seal all mating surfaces. All models can be converted to Hydromatic® (self-cleaning) operation. Improved cylindrical filter basket. #304-SS basket is standard with .077” holes (.125” and .188” hole sizes are optional). Monel basket is optional. Bronze flange adaptors are available for connecting pipe or hose to flanged strainers.

MODEL SEF

WITH FLANGED PORTS 4", 5", 6"

FLANGE ADAPTOR F-SERIES The installation of GROCO SEF or HSEF series strainers (or any other flanged equipment) can be simplified with the use of our bronze flange adaptors.

MODEL ASEF WITH BRONZE ENCLOSURE, 4", 5", 6"

(RING GASKET IS INCLUDED)

F-series adaptors match standard strainer flanges while permitting the use of NPT threaded pipe connection or a pipe-to-hose adaptor for hose connection. 4" (F-4000), 5" (F-5000) and 6" (F-6000) flange adaptors are available. #304 SS

BASKET SE-4000 SEF-4000 SEF-5000 SEF-6000

MONEL

BASKET SE-4000-M SEF-4000-M SEF-500-M SEF-6000-M

PIPE CONNECTION 4" NPT 4" Flange 5" Flange 6" Flange

MOUNT BOLTS 3/4 3/4 3/4 3/4

*WEIGHT 97# 118# 134# 147#

RATIO OF OPEN SCREEN AREA TO PIPE 10:1 10:1 8.1:1 6.7:1

PKG 1 1 1 1

*Add 30 lbs. for bronze enclosure numbers listed above are standard #304 stainless steel filter basket. Add suffix "M" for Monel (ie: SE-4000-M). steel or Monel filter baskets have .077" (2mm) holes. Add suffix "FM" for 60-mesh fine-mesh filter basket insert. Other mesh counts are available by special order. For ABS compliance add prefix "A" to specify bronze enclosure instead of the plastic sight glass. (ie: ASEF-6000). Model

Stainless

RAW WATER STRAINERS

242

2011

GROCO® 21

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


PLUMBING & PUMPS

HYDROMATIC® SELF-CLEANING STRAINERS U.S. PATENT NO. 5,830,366 THE CONCEPT As raw water strainers do their job, their filter basket becomes clogged with debris and flow to the connected device is reduced, resulting in the need for system shut-down for cleaning and maintenance. Hydromatic® strainers eliminate untimely shut-downs and

maintenance by conducting a periodic self-cleaning cycle (the user selects the cleaning interval) with its powerful internal macerator. Debris is pumped overboard without shutting down the connected device.

COMMON FEATURES ■ ■

■ ■

A 30-second cleaning cycle is automatically performed at user-selected intervals. The "Purge" option over-rides the selected cleaning interval and performs a one-time 30-second cleaning cycle. Powerful macerator grinds debris and discharges overboard below the waterline. "Ignition Protected" motors for DC models.

■ ■ ■ ■

AC models available in various HP and Phase options -115VAC, 60Hz, 1-phase is standard. 970 and HSE models function as a sea chest to provide filtered water to multiple devices. Installation can be horizontal or vertical (flooded inlet required). HSE models are available with a bronze enclosure in place of clear sight glass. Specify AHSEF-(pipe size)-(voltage).

911-1000 Provides filtered water to a single device and has 1" NPT ports for Water In, Water Out and Debris Out.

970-1500 Provides filtered water to multiple devices, and has a 1-1/2" NPT inlet port with multiple 1/2", 3/4" and 1" ports for connecting devices. Debris is pumped out through a 3/4" NPT port.

911 DIMENSIONS

970-1500 DIMENSIONS

22

GROCO®

970-2020 Provides filtered water to a single 1-1/2" or 2" device. Debris is pumped out through a 3/4" NPT port.

970-2020 DIMENSIONS

2011

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

HSE Provides filtered water to 4", 5" or 6" device, or may be used as a sea chest to provide filtered water to multiple smaller devices. Debris is pumped out through a 1" NPT port.

HSE DIMENSIONS

RAW WATER STRAINERS

243


PLUMBING & PUMPS

HYDROMATIC® SELF CLEANING STRAINERS U.S. PATENT NO. 5,830,366

911 SAMPLE INSTALLATION

HSE SAMPLE INSTALLATION

RAW WATER STRAINERS

244

2011

GROCO®

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

23


PLUMBING & PUMPS

HULL STRAINERS WITH ACCESS DOORS PATENT NO. 6,009,823 THE CONCEPT Access to the thru-hull fitting and seacock beneath GROCO hull strainers is made easy with the patented access door design. Now there is no need to remove the entire strainer to clear nuisance marine growth.

APHS SERIES - PERFORATED HULL STRAINER

APHS BRONZE

Aluminum models may be welded or screwed to aluminum hulls.

APHS ALUMINUM BRONZE MODEL APHS-1250-1 APHS-2000-1 APHS-3000-1 APHS-6000-1

ALUMINUM MAX A B MODEL T-HULL APHS-1250-1 AL 1-1/4" 7.00 3.38 APHS-2000-1 AL 2" 10.25 4.38 APHS-3000-1 AL 3" 15.38 6.00 APHS-6000-1 AL 4" 20.25 11.00

C

SCREWS PKG

1.50 1.63 2.00 4.00

4 #10 5 #10 5 #10 9 #12

4 4 2 2

Ratio of Open Area to Pipe Size

1/2" 18.1 51.2 119.3 288.8

3/4" 1" 1-14" 1-1/2" 2" 2-1/2" 3" 8.1 4.5 2.9 22.8 12.8 8.2 5.7 3.2 53.0 29.8 19.1 13.3 7.5 4.7 3.3 128.3 367.8 46.2 32.1 18.1 11.6 8.0

4" -

4.5

Dimensions and ratios for aluminum models are identical to bronze models. Add suffix -AL for aluminum models.

ASC SERIES - SLOTTED HULL STRAINER

ASC ALUMINUM

ASC BRONZE

BRONZE MODEL ASC-1250 ASC-2000

ALUMINUM MODEL ASC-1250-AL ASC-2000-AL

MAX A T-HULL 1-1/4" 7.00 2" 10.25

ASC-3000

ASC-3000-AL

3"

15.38

ASC-6000

ASC-6000-AL

4"

B

C

3.38 4.38

1.50 1.63

4 #10 5 #10

6.00

2.00

20.25 11.00 4.00

Aluminum models may be welded or screwed to aluminum hulls.

SCREWS PKG

Ratio of Open Area to Pipe Size

4 4

1/2" 26.5 61.1

3/4" 11.8 27.2

1" 6.6 15.3

1-14" 1-1/2" 4.3 9.8 6.8

5 #10

2

129.1

57.4

32.3

20.7

14.4

9 #12

2

324.5 144.2 81.1

51.9

36.1

2" 3.8

2-1/2" -

3" -

8.1

5.2

3.6

20.3

13.0

9.0

4" 5.1

Dimensions and ratios for aluminum models are identical to bronze models. Add suffix -AL for aluminum models.

RSC SERIES - ROUND HULL STRAINER RSC ALUMINUM RSC-2500-L

Aluminum models may be welded or screwed to aluminum hulls. BRONZE MODEL RSC-1000 RSC-2000 RSC-2500-L RSC-4000

ALUMINUM MODEL RSC-1000 AL RSC-2000 AL RSC-4000 AL

MAX T-HULL 1" 2" 2.5” 4"

A

B

C

3.63 5.20 5.60 9.00

0.56 0.83 1.00 1.30

-

SCREWS PKG 4 4 6 4

#10 #10 #10 #10

4 4 4 2

Ratio of Open Area to Pipe Size

1/2" 5.8 15.0 161:1 46.7

3/4" 1" 1-14" 1-1/2" 2.6 1.4 6.7 3.8 2.4 1.7 10.6:1 6.0:1 3.8:1 2.6:1 20.8 11.7 7.5 5.2

2" 0.9 2.9

2-1/2" 1.9

3" 1.3

4" 0.7

Dimensions and ratios for aluminum models are identical to bronze models. Add suffix -AL for aluminum models. RSC-2500-L does not have an access door. 24

GROCO®

2011

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

RAW WATER STRAINERS

245


PLUMBING & PUMPS

SC SERIES - SLOTTED STRAINER WITH MOUNT RING Aluminum models may be welded or screwed to aluminum hulls. Mount the ring permanently. Fasten the strainer to the ring and remove as often as needed. Scoop-to-Ring fasteners are included.

Specify SC-L for Scoop without mount ring

SC ALUMINUM

SC SERIES SC BRONZE BRONZE MODEL SC-1000 SC-1500 SC-2500 SC-4000

ALUMINUM MODEL SC-1000 AL SC-1500 AL SC-2500 AL SC-4000 AL

MAX A T-HULL 1" 5.25 1-1/2" 6.82 2-1/2" 8.50 4" 12.50

Ratio of Open Area to Pipe Size

B

C

SCREWS PKG

3.62 4.70 6.00 8.62

1.25 1.50 2.00 2.75

6 6 6 8

#10 #10 #10 #10

2 2 2 2

1/2" 13.4 20.2 36.0 109.0

3/4" 6.0 9.0 16.0 48.4

1" 3.3 5.0 9.0 27.2

1-14" 1-1/2" 3.2 2.2 5.8 4.0 17.4 12.1

2" 2.2 6.8

2-1/2" 1.4 4.4

3" 3.0

4" 1.7

Dimensions and ratios for aluminum models are identical to bronze models. Add suffix -AL for aluminum models.

BS SERIES - BILGE STRAINERS ■

Use for preventing large debris in the bilge area from entering bilge pumps. Ideal for use with GROCO SBV-P series Safety Seacock with side port. Threaded NPT for use with o straight or 90 pipe to hose adaptors.

MODEL BS-750 BS-1000 BS-1250 BS-1500 BS-2000 BS-2500 BS-3000

NPT SIZE 3/4" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3"

BS BILGE STRAINER

A 1.88" 1.88" 3.40" 3.40" 5.25" 5.25" 5.25"

B 2.13" 2.13" 3.63" 3.63" 3.63" 3.63" 3.63"

C 2.00" 2.00" 2.00" 2.00" 2.00" 2.00" 2.00"

USE WITH SBV-P MODEL SBV-1250-P SBV-1500-P SBV-2000-P SBV-2500-P SBV-3000-P SBV-4000-P

PKG 1 1 1 1 1 1 1

SW-2531 SPANNER WRENCH/DECK PLATE KEY ■

■ ■ ■ ■

Among the features of ARG, SS, SD and BVS series strainers are provisions on the strainer cap for the use of a spanner wrench to loosen the cap before or after maintenance. Hand-tight is sufficient for a good seal for GROCO strainers with threaded caps, but some boaters may prefer to "snug" the cover beyond hand-tight. NOTE: Do not use SW-2531 to tighten non-metallic caps. Cast bronze with stainless steel pins to fit 1/4" and 5/16" holes Opens to service deck plates or strainer caps with key holes up to 7" apart. Hangs conveniently near the strainer(s) location. Package quantity is nine (9).

RAW WATER STRAINERS

246

2011

SW-2531 SPANNER WRENCH

GROCO® 25

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


PLUMBING & PUMPS

SWEETTANKTM ODOR NEUTRALIZATION SYSTEM PATENTED

▲ MODEL STK-18 ▲

TM SWEETTANK TM KIT RETAIL PACKAGE

THE CONCEPT

OPTIONS

The SWEETTANKTM concept has been developed to stop odors in yacht and RV holding tanks without the use of chemicals or filters. SWEETTANKTM is standard equipment on Thermopure-2y Type-I MSD (see Page 3), is optional in GROCOy Type-III MSD (see Page 4), and is offered in several retrofit kits to fit existing holding tanks.

There are two ways in which to employ the SWEETTANKTM concept:

HOW IT WORKS

1. Install SWEETTANKTM into the top or the side of any rigid holding tank. STK-18 fits tanks up to 18" deep. Models are available for deeper tanks (call GROCOy MSD Technical Service). VENT TO PORT AND STBD

Aerobic and anaerobic bacteria coexist naturally in raw sewage, but it is the anaerobic bacteria that produce undesirable odors. By inducing a constant flow of air into the holding tank through a submerged aeration tube, SWEETTANKTM produces an oxygen-rich environment in which the anaerobic bacteria cannot thrive, thus eliminating unpleasant odors. The heart of the SWEETTANKTM system is a compact module that operates continuously to deliver air to the holding tank using less than 3-watts of DC power. For yachts where AC power is always available, an AC powered SWEETTANKTM module is offered.

INSTALLATION ■

SWEETTANKTM screws into a 1-1/2" NPT threaded fitting in the top or side of the tank.

If the tank has no 1-1/2" NPT opening, aeration equipment is installed into a 2-1/2" hole cut in the tank top or side. All mounting hardware is included.

STK-18 fits tanks up to 18" deep. Contact GROCOy for installation in tanks deeper than 18".

2

GROCOy Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

2. Install a complete ZDS series Type-III MSD. ZDS includes the holding tank, level monitor, macerator/discharge pump and SWEETTANKTM (see Page-4).

2008 ❖ TOILETS & SANITATION

247


PLUMBING & PUMPS

WASTE HOLDING TANK LEVEL MONITORS THE CONCEPT TLM Series uses simple and reliable technology (floats) to indicate tank level in fresh water or waste holding tanks.

FEATURES ■

■ ■ ■

The gasketed indicator panel is suitable for wet locations such as combination shower/head compartments. The sending unit screws into any 1-1/2" NPT threaded tanktop opening. If there is no 1-1/2" NPT opening available, TLM can be installed into a 2-1/2" hole cut into the tank top. Installation hardware is included. Level indications are 1/4 full and 3/4 full. A 20-amp momentary switch is provided to activate a macerator pump. Standard model (TLM-10) is for use in tanks 10" to 12" deep. Custom lengths are available.

Includes Indicator Panel, Wire Harness and Tank Sender

TLM LEVEL MONITOR

Specify TLM-XX (XX = tank depth in inches). For 12V, 24V, or 32V DC systems.

HVL AND PVL SERIES - VENTED LOOPS THE CONCEPT ■

Allows air to enter to break siphon, but does not permit air and odors to escape! Cap is threaded 1/2" NPT to accept a barb fitting if you wish to vent overboard.

Overboard venting is required if PVL or HVL series is used in an exhaust system. HVL and PVL series vented loops assure clog-free antisiphon protection for sanitation or engine exhaust systems. The oversized vent valve can easily be removed for inspection or cleaning without tools. Mount Hardware is included.

MODEL HVL IS FOR HOSE CONNECTIONS

HVL-1000 IS SHOWN PACKAGED FOR RETAIL SALE.

MODEL PVL IS FOR PIPE CONNECTIONS MODEL

CONNECTION

WEIGHT

PKG

HVL-500 HVL-750 HVL-1000 HVL-1500 PVL-500 PVL-1000 PVL-1500

1/2" ID Hose 3/4" ID Hose 1" ID Hose 1-1/2" ID Hose 1/2" NPT 1" NPT 1-1/2" NPT

2.3# 1.8# 2.0# 2.6# 1.9# 2.5# 3.5#

2 2 2 2 2 2 2

TOILETS & SANITATION ❖ 2008

248

GROCOy 7 Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


PLUMBING & PUMPS

CIRCULATING PUMPS Our longtime customers rely on our stainless steel and bronze pumps, and once you've owned one, you'll know why. 5 different models with flow rates from 225 gph to 1,200 gph cover a wide variety of uses. All pumps in this series come with a one-year warranty and will provide trouble free use in fresh or salt water. You can even use it in hot water up to 45°C! Features & Benefits • One year warranty • UL Listed for consumer confidence • Premium stainless steel and bronze construction for longevity • Six or twenty foot power cord for convenience • Suitable for fresh or salt water applications • Can be used in hot water applications up to 45°C • Extremely quiet operation • Use submerged or in open air • Corrosion resistant • 115 or 220 volt motors • Thermally protected • Optional Mounting Bracket Available (model MSUB OR MSUBM) • Operate horizontal or volute down • MS225 and MS320 have ½” MNPT intake and ¼” MNPT discharge • MS580, 900,1200 have ¾” MNPT intake and ½” MNPT discharge

MADE IN USA US COAST GUARD APPROVED

230V - 50HZ PERFORMANCE Code

Amps Max

CAL-MS225 CAL-MS320 CAL-MS580 CAL-MS900 CAL-MS1200

.5 .7 1.3 1.5 1.9

Max Flow LPH 860 1170 2600 2800 3400

Max HT. M

1' /.3m

3' / .9m

5' / 1.5m

7' / 2.1m

9' / 2.7m

11' / 3.3m

13' / 3.9m

15' / 4.5m

17' / 5.3m

1.8 3.8 4.2 4.8 5.4

725 1040 2400 2480 3100

510 970 2175 2290 2900

240 880 1950 2100 2680

760 1680 1880 2465

620 1375 1620 2200

1000 1330 1950

360 1000 1620

500 1230

650

EDSON DIAPHRAGM PUMPS DIAPHRAGM PUMP APPLICATIONS As Bilge Pumps PICK A PUMP, ANY PUMP... Edson manufactures the highest quality, most reliable and longest lasting bilge pump on the market. Manual or Power models, they all have large openings and straight through passages for dealing with large solids with virtually clog-proof operation. The powerful vacuum will suck a bilge dry from heights of over 12 ft (3.7 m). Simple, straight-forward design allows for easy maintenance while at sea. IF IT FLOWS THROUGH THE HOSE, IT GOES THROUGH THE PUMP.

Permanent Pump Mounted in Sailboat Bilge

As Emergency Back-Up Pumps AN EDSON PUMP CAN EVEN OUTPERFORM A SCARED MAN WITH A BUCKET… Edson Manual Diaphragm Pumps will pump at an amazing 1-gallon per stroke. This fact combined with the self priming vacuum and large solids handling feature is why they are recognized by experienced sailors and sport fishermen as an absolute necessity for offshore passage making. The Portable Pump Kit provides unlimited flexibility for use in the cockpit and below decks. PRUDENT SAILORS KNOW THAT A MANUAL EMERGENCY BILGE PUMP IS A FIRST PRIORITY WHEN OUTFITTING A BOAT.

Portable Pump in Sailboat Cockpit

As Black & Gray Water Handling Pumps USING THE BEST EQUIPMENT WHEN PUMPING EFFLUENT MEANS YOU’RE LESS LIKELY TO COME INTO CONTACT WITH IT… Pumping sewage and wastewater on board a boat is never a pleasant undertaking. Why not make it easy on yourself and your crew? Use an Edson Manual Diaphragm Pump for small holding tanks and power models for yachts with large systems. Pumping sewage was the job Edson pumps were designed for nearly 150 years ago. Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

249


PLUMBING & PUMPS

40 GPM DIAPHRAGM PUMPS The Edson Diaphragm Pump has been used for over 140 years for bilge pumping, sewage collection, spill clean-up and oil collection. The Gallon-a-Stroke manual models are recognized as the industry standard for use as emergency pumps because of their high capacity, clog-free design, ease of use and robust construction. The 40 GPM powered models are setting the standard for sewage handling on the best built yachts. These pumps have also become the choice of dock masters for shore side pump out stations. The Edson 40 gallon per minute air and electric powered pumps feature superior construction, simplistic design, and dependability which will provide the buyer with many years of service.

Features & Benefits • One Gallon Per Stroke Manual Pumps. • Highest Capacity Manual Pump on the Market. • Built Tough for Years of Service. • Designed Simple for On Board Maintenance. • 40 GPM Electric and Air Powered Models. • Self Priming • 12’ (3.7m ) vertical lift. • Handles Solids up to 11⁄2”. • Large Flow Through Inlet and Discharge Passages for Virtual Clog-Proof Operation. • Reinforced Diaphragms and Valves for Long Life (over 3,000,000 Cycles). • Marine Grade Bronze or Anodized Aluminium. • 11⁄2” or 2” NPT Ports

Manual Pumps Edson Gallon-a-Stroke Manual Pumps are available in four models with either side inlet or bottom inlet chambers and lever action or offset drive sockets. The choice of model is based on where you want to locate the pump on the boat. The Offset models were designed to be mounted behind a bulkhead or cockpit seat. Based on a 5’ suction lift and 2” discharge, they will pump 1 gallon per stroke.  A comfortable pumping rate is 30 strokes per minute, equalling 30 GPM. For easy standup pumping, a 32” stainless steel handle is included.

Electric & Air Powered Pumps Electric Powered Pump #120EL

Code

117AL 117BR 554AL 554BR 638AL 638BR 557AL 557BR 120ELA 120ELB 120ACA 120ACB 165AL-30

250

Pump Type

Lever Action Side Inlet Offset Drive Side Inlet Lever-Action Bottom Inlet Offset Drive Bottom Inlet Electric Powered Air Powered Portable Pump Kit

Material

Air Powered Pump #120AC

Suction, Discharge & Hose Size

Pump Weight Kg

Aluminium Bronze Aluminium Bronze Aluminium Bronze Aluminium Bronze Aluminium Bronze Aluminium Bronze

1-1/2" NPT or 2" NPT

6.3 16.3 8.2 17.8 6.3 15.1 8.2 19 35.8 44.1 15.9 26.8

Aluminium

2" NPT

11.2

1-1/2" NPT or 2" NPT 1-1/2" NPT or 2" NPT 1-1/2" NPT or 2" NPT 1-1/2" NPT or 2" NPT 1-1/2" NPT or 2" NPT

Air & Electric 40 GPM Pumps are the most popular of all Edson Power Pumps due to the convenience, versatility and economy of the drives. The Air Powered Pumps require a compressed air source of 15 CFM at 85 PSI. The Electric Pumps are sold with one of two fixed speeds, a 30 cycle per/min. 20 GPM version or a 60 cycle per/min. 40 GPM version. Single-phase 120-volt motors are standard, but 3-phase 240-volt and 12 or 24-volt motors are optional.

Gallon-a-Stroke Portable Pump Kit The best insurance you can put on a boat Edson 30 GPM Portable Pump Kits are complete pumping systems that include the #117AL Pump mounted on a Carrying Board with 32″ Handle. Quick Clamp Hose Fittings and a single 20′ length of hose. Regarded by experienced captains as the “Gold Standard” when it comes to emergency manual bilge pumps.

Portable Pump Kit Bag #275-31

Portable Pump Kit #165AL-30

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


PLUMBING & PUMPS

18 GPM DIAPHRAGM PUMPS Features & Benefits • 18 GPM at 46 Strokes Manual Pumps. • Up to 18 GPM Electric and Air Powered Pumps. • Self -Priming from Dry Starts to • 15 vertical feet (4.6 meters). • Handles Solids up to 1 Inch. • 11⁄2” Flow-Through Inlet and Discharge Passages for Virtual Clog-Proof Operation. • All Models are Available for 11⁄2 “ NPT Ports. • Available in Marine-Grade Bronze and Anodized Aluminium. • Reinforced Diaphragms and Valves for Long Life (over 3,000,000 Cycles). • Built Tough for Years of Service • Designed Simple for On Board Maintenance.

Edson 18 GPM Diaphragm Pumps are a smaller version of the famous Edson 40 GPM Pumps and are designed to be used as bilge pumps or general purpose pumps aboard yachts or workboats. The manual pumps are excellent for installations in shallow bilges or small lockers. They will pump 18 GPM at a comfortable 45 strokes per minute and are offered in four versions to accommodate different locations on the boat. The electric and air power pumps are used for all the same applications as the larger 40 GPM Pumps: bilge pumping, sewage transfer, spill clean up, oil collection, and pump out of sumps, holding tanks and gas tanks. They require a little less space, are lighter and pump up to 18 GPM. All pump models are available in 356-T6 Anodized Aluminium or Marine-Grade Bronze with Stainless hardware.

Manual Pumps

Seat Riser #258

Manual 18 GPM Pumps are offered to facilitate installation based on where you want to locate the pump on the boat. The Offset Pump #254 facilitates mounting the pump behind a bulkhead, the Vertical Mount Pump #256 allows mounting the pump on a wall and the #258AL is ideal for mounting behind a seat riser in the cockpit. An 18”Aluminum handle comes with every pump. A 32”/81cm stainless steel handle is optional.

Lever Action Side Inlet #217

Offset Drive Side Inlet #254

Electric & Air Powered Pumps Electric Powered 18 GPM Pump #220EL

Air & Electric 18 GPM Pumps are the most popular of all Edson Power Pumps due to the convenience, versatility and economy of the drives. The Air Powered Pumps require a compressed air source of 8 CFM at 85 PSI. The Electric Pumps are sold with one of two fixed speeds, a 30-cycle per/min. 10 GPM version or a 60cycle per/min. 20 GPM version. Both come standard with a 1/2 HP single-phase 120-volt motor, 3-phase 240-volt and 12 or 24-volt motors are optional.

Code

217AL-150 217BR-150 254AL-125 254BR-150 256AL-150 256BR-150 258AL-150

Pump Type

Material

Lever Action Side Inlet

Aluminium Bronze Aluminium Bronze Aluminium Bronze Aluminium

Offset Drive Side Inlet Vertical Mount Seat Riser

220ELA-150 220ELB-150 220ACA-150 220ACB-150 165AL-18-150 165BR-18-150

Electric Powered Air Powered Portable Pump Kit

Aluminium Bronze Aluminium Bronze Aluminium Bronze

Suction, Discharge & Hose Size 1-1/2" NPT 1-1/2" NPT 1-1/2" NPT 1-1/2" NPT 1-1/2" NPT 1-1/2" NPT 1-1/2" NPT

Pump Weight Kg 4.5 14.5 6.4 15.9 4.5 13.2 4.5 37.2 40.3 17.3 12.3 3.6 8.6

Air Powered 18 GPM Pump #220AC

18 GPM Portable Pump Kit Edson 18 GPM Portable Pump Kits are complete pumping systems that include the #217 Side Inlet Pump mounted on a Carrying Board with 32” Handle, Quick Clamp Hose Fittings and a single 20’(6m) length of 11⁄2” hose supplied for optimum configuration by customer.

18 GPM Portable Pump Kit #165BR-18

ASK FOR AN EDSON CATALOGUE FOR MORE DETAILED PUMP INFO Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

251


PLUMBING & PUMPS

PARAGON SENIOR WATER PUMP SERIOUS WATER PUMPS COST SERIOUS MONEY Groco is one of the best known US manufacturers of marine plumbing fittings, pumps, strainers and waste handling systems. Their PARAGON SENIOR Pressure pump is not pretty to look at but makes up for its looks with performance. Its DC motors are 1/3rd HP, Commercially rated, coupled with a bronze pump head with dual Teflon impellers. Requires a 50 amp breaker, and draws about 30 amps at 12 volts. Minimum recommended inlet hose size is 1” (3/4” is ok if the draw line is short) • Pressure output up to 50 psi (3.4 bar). • Flow output up to 40 litres per minute. • Draw head can be up to 10 ft • It will run up to 6 taps. • Built-in “Dry Tank” Shutdown after 9 minutes. • Includes Pressure Switch mounted on separate manifold. MSA has accepted as emergency Fire Pump. Surveyor approval should be confirmed. We have never seen or heard of a motor failure. The pump head is fully dismountable and serviceable by DYI. Believe it or not, the Paragon Senior has been around for over 20 years, with just minor changes with pressure switch development.

For performance and reliability (but not looks) we recommend the Paragon Senior for boats over 45ft. Available with 12V, 24V DC and 230/50 AC Motors 252

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


PLUMBING & PUMPS

Large Yacht Pressure System Large Yacht Parallel Pressure System

Mid-Size Yacht Pressure Systems

Dry-Tank Protection System for Pumps

Paragon Senior ( PSR ) Parallelagon ( PAR ) Paragon Junior ( PJR ) Paragon Junior with

1-gallon Tank ( PJR-A ) Paragon Junior with Integral Tank ( PJR-B ) WSG-1 NOFLO TM

WATER PRESSURE SYSTEMS ❖ 2008

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

GROCOy 9

253


PLUMBING & PUMPS

WATER PRESSURE SYSTEMS MODEL

WSG-1 PJR-A PJR-B PSR (DC) PSR (AC) 400-0004

YACHT SIZE

PRESSURE RANGE

MAX GPM

UL/CE

INCLUDES PRESSURE TANK

SELF PRIMING

BREAKER

Up to 40 Up to 50 Up to 50 Over 50 Over 50 Over 50

20-40 20-40 20-40 30-50 30-50 30-50

3.5 7.0 7.0 11.0 11.0 11.0

No Yes Yes Yes No No

1-Gallon 1-Gallon 2-Gallon Order Separately Order Separately Order Separately

Yes Yes Yes Yes Yes Yes

15 @ 12V 30 @ 12V 30 @ 12V 50 @ 12V 50 @ 12V 50 @ 12V

WSG-1

PJR SERIES LISTED 524F

Positive displacement gear pump.

Smooth, quiet operation.

3/8" NPT inlet.

Low AMP draw.

Compact and powerful 2-stage rotary pump.

Pressure gauge and 3/4" strainer included.

Patented NOFLOTM Dry-run protection.

Order Model PJR for pump without the tank. NOTE: Tank is required for water pressure system application.

Compact and powerful 2-stage rotary pump is tankmounted, so installation is easy.

Pressure gauge and 3/4" strainer included.

Patented NOFLOTM Dry-run protection.

Powerful 2-stage rotary pump.

AC models available.

Pressure gauge and 1" strainer included.

Patented NOFLOTM Dry-run protection.

Order PST tank separately.

PJR-B SERIES LISTED 524F PUMP ONLY

PSR SERIES LISTED 524F DC MODELS ONLY

10

254

GROCOy

2008

WATER PRESSURE SYSTEMS

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


PLUMBING & PUMPS

PARALLELAGON

PARALLEL PUMPS SYSTEM FOR LARGE YACHTS THE CONCEPT

PAR HORIZONTAL FORMAT

Big yachts demand big performance and require on-line back-up for all systems, plus the versatility to provide the conveniences of home, whether they are underway or at berth. PARALLELAGON answers the call with the first parallel pumps system, complete with a solid-state control system and patented NOFLOTM dry run protection.

Depending on the voltage present, either an AC pump or a DC pump provides uninterrupted operation, without actuating valves,switches or circuit breakers, and regardless of the available voltage. If AC power is present, the AC pump operates; if AC power is not present, the DC pump operates. The system control determines which voltage is present, and which pump to operate.

PARV VERTICAL FORMAT

FEATURES ■

Vertical (PAR-V) and horizontal (PAR) layouts are offered to meet your specific installation space availability.

One � ignition protected�pressure control operates both pumps

Patented NO-FLO TM dry-run protection system protects both pumps.

Simplified plumbing - one inlet and one outlet connects PARALLELAGON to the vessel water system.

Inlet strainer and oil-filled pressure gauge are included.

Available with any combination of: DC 12V, 24V, 32V AC 115V, 230V, 50 Hz or 60 Hz

HOW TO ORDER

▲ PARALLELAGON SAMPLE INSTALL

PTH 1000 PTH

NOFLO

PRESSURE SWITCH

1000

▲ PARALLELAGON HORIZONTAL DIMENSIONS

WATER PRESSURE SYSTEMS ❖ 2008 Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

▲ PARALLELAGON VERTICAL DIMENSIONS GROCOy 11

255


PLUMBING & PUMPS

PST SERIES - PRESSURE STORAGE TANKS PST-1 AND PST-2

THE CONCEPT A pneumatic pressure charge, matched to the pump cut on pressure prevents waterlogging by separating the air charge from system water pressure with a rubber bladder. The result is smooth pressure delivery, even temperature mix in showers, and reduced pump cycling. Tanks may be mounted in any position, and anywhere in the cold water plumbing after the pump. PST tanks may be used for fresh or salt water. Mount hardware is included. PST-6 has a pump stand for mounting PJR, WSC-60 or WSC-80 pump. MODEL

DIAMETER

LENGTH

MOUNTING

PLUMBING

DRAWDOWN

MAX PSI

PST-1 PST-2 PST-3A PST-4 PST-5 PST-6

8.0" 11.0" 15.4" 15.4" 15.4" 10.0"

12.63" 14.00" 19.25" 24.00" 31.63" 17.10"

Straps Straps Stand Stand Stand Stand

3/4" NPT 3/4" NPT 3/4" NPT 1" NPT 1" NPT 3/4" NPT

1.0 gallon 2.5 gallons 5.5 gallons 7.0 gallons 10 gallons 2.5 gallons

100 100 100 100 100 100

PST-3A, PST-4 AND PST-5

NOFLOTM DRY-TANK PROTECTION FOR PUMPS (PATENTED)

HOW IT WORKS The conductivity of water is utilized to recognize the presence or absence of water. The control translates the information received from the NOFLOTM sensor, and either permits the pump to run, or disables it. In the event of a shutdown, pump operation is not automatically re-started, but may be resumed only after the cause for the interruption of flow has been resolved, and the control reset by briefly interrupting power at the breaker panel.

THE CONCEPT Most pumps depend on the water being pumped for seal lubrication and impeller protection, and pressure pumps are controlled by a pressure switch that relies on the presence of water to deliver flow and pressure. When an interruption to the supply of water occurs, none of these functions work as intended, and if left undetected the pump is likely to run continuously, resulting in drained batteries, pump damage, or both.

The NOFLOTM control module operates on any DC input from 12V to 32V, and has an internal relay that will provide power to a DC pump motor (20 amps max@12VDC). AC pumps require an additional relay or solenoid. NOFLOTM may be used with or without external pump control (pressure switch or on-off switch). o

Maximum water temperature is 240 F.

Standard equipment on Paragon Junior, Paragon Senior and Parallelagon pumps, NOFLOTM is a patented system designed to recognize an interruption to the flow of water to your pump of greater than 30-seconds duration, and to safely shut off the pump. There are no moving parts or probes into the water path, and NOFLOTM works with any pump type (centrifugal, vane, rotary, etc.), or any pump material (bronze, stainless steel, plastic, etc.). Model NOFLO-7500 NOFLO-1000 12

256

Plumbing NPT On-Off Control 3/4" Any NC Pressure Switch or Toggle Switch 1" Any NC Pressure Switch or Toggle Switch

GROCOy

▲ NOFLOTM SAMPLE INSTALLATION FOR AIR CONDITIONING SYSTEMS

2008

WATER PRESSURE SYSTEMS

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


PLUMBING & PUMPS

Utility Use, Fuel Transfer, Oil Change Kits

GEAR PUMPS

Utility Use and Deck Wash Kits

VANE PUMPS

Marine & Automotive

CENTRIFUGAL PUMPS

Rotary Pumps & Kits

ROTARY PUMPS

Pumps & Accessories

BILGE PUMP ACCESSORIES

Oil Change Systems

PUMPS & ACCESSORIES

2011

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

GROCOy 33

257


PLUMBING & PUMPS

OIL CHANGE SYSTEMS

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

258 y


PLUMBING & PUMPS

U-LUBE OIL CHANGE SYSTEMS At the heart of GROCO’s U-Lube systems is a powerful gear pump that delivers an honest 3-plus GPM. All models have dry-run protection, touchpad control, a plumbing schematic to tell you what hose goes where, and a handy maintenance log. Choose the model with the number of valves you need, that fits the available space. A complete assortment of oil pan adaptors and related fittings and valves is offered to complete your installation.

GHSN is not covered and may be ordered with any number of valves. Touch-pad control and over-current protection are mounted behind the pump and motor.

G-3 is covered (except for the valves), for a clean engine room appearance, and offers a compact mount footprint. Touch-pad control and over-current protection are cover-mounted.

G-4, G-5, and G-6 are covered (except for the valves), and offer a slim mount footprint. Touch-pad control and over-current protection are covermounted.

GHS is completely covered, and features hinged-door access, with a magnetized lid to conceal and protect valves and touch-pad controls.

ADAPTOR #

OPD-01 OPD-02 OPD-03 OPD-04 OPD-05 OPD-06 OPD-07 OPD-08 OPD-09

PUMPS & ACCESSORIES

OIL PAN THREAD

3/4"-16 UNF 7/8"-14 UNF 7/8"-18 UNF 3/4"-14 NPT 1"-11.5 NPT 1"-18 UNS 1-1/16"-12 UNF 1-1/8"-12 UNF 1-5/16"-12 UNF

2011

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

RESET

OPEN

OFF

EMPTY

STOP

FILL

CLOSE

ADAPTOR #

OPD-10 OPD-11 OPD-12 OPD-13 OPD-14 OPD-15 OPD-16 OPD-17 OPD-18

OIL PAN THREAD

1/2"-12 UNF M18 X 1.50 M22 X 1.50 M24 X 2.00 M25 X 1.50 M26 X 1.50 M27 X 2.00 M30 X 1.50 M30 x 2.00

GROCOy 35

259


PLUMBING & PUMPS

POSITIVE DISPLACEMENT PUMPS GPB SERIES and SPO SERIES

GROCO Vane Pumps are self-priming, are instantly reversible, and are capable of operation in either direction. Relatively high flow (more than gear pumps) makes them suitable for general purpose duties such as deck-wash, bilge pumping (filtered inlet), fuel transfer, ballast transfer, and oil change. All models have an ignition protected motor and #316 stainless steel shaft, and are available in models that provide reversing (R), remote reversing (RR), and reversing with touchpad (RT) control options. SPO-80 series vane pumps have a more powerful motor and are better suited for long run-time or head pressure greater than 20 PSI.

SPO-60-N SPO-80-N

SPO-60-R SPO-80-R

SPO-60-RR SPO-80-RR

SPO-60-RT SPO-80-RT

GROCO Gear Pumps are self-priming, are instantly reversible, and are capable of operation in either direction. Relatively low flow (less than vane pumps) makes them suitable for duties such as deck-wash, fuel transfer, ballast transfer, and oil change. All models have an ignition protected motor and #316 stainless steel shaft, and are available in models that provide reversing (R), remote reversing (RR), and reversing with touchpad (RT) control options.

GPB-1 2

GPBR-1 4

6

8

GPRR-1

GPBRT-10

AMPS @ 13VDC 10 12 14 16 18 20 22 24 26 28

50 45

GP-1 AMPS

40 PSI

35

GP-1 FLOW

30 25 20 15 10 5 .5

MODEL

SPO-N SPO-R SPO-RR SPO-RT GPB-1 GPBR-1 GPRR-1 GPBRT-1 36

260

GROCO®

1.0

1.5

2.0 GPM

2.5

3.0

3.5

SELF-PRIMING

PORTS

Yes Yes Yes Yes Yes Yes Yes Yes

1/2“ NPT + GH Adaptors 1/2“ NPT + GH Adaptors !/2” NPT + GH Adaptors !/2” NPT + GH Adaptors 3/8” NPT 3/8” NPT 3/8” NPT 3/8” NPT

CONTROL TYPE INCLUDED

None Pump Mounted Reversing Switch Remove Momentary Reversing Rocker Switch Pump Mounted Touch Pad None Pump Mounted Reversing Switch Remote Momentary Reversing Rocker Switch Pump Mounted Touch Pad

2011

PUMPS & ACCESSORIES

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


PLUMBING & PUMPS

TRANSFER KITS / DECK WASH KITS 350 Series, C-60 and C80

350 SERIES TRANSFER KITS Boats with multiple fuel or water tanks occasionally have the need to transfer from one tank to another. Common problems with such a system have been siphoning of the transferred fluid back to the original tank, and loss of pump prime. GROCO 350 Series Transfer Kits utilize check valves to address both problems, so once the fluid is where you want it, it stays where you want it. System control is commanded easily from the helm with the switching system provided. One-way and two-way systems are offered, powered by your choice of GROCO GP-1 gear pump, SPO-60 vane pump or SPO-80 vane pump. Refer to Page 36 for performance data. Mount board included.

Model

Description

Plumbing

350-0501-XX

1-WAY GEAR PUMP TRANSFER KIT

1/2” NPT

350-0502-XX

2-WAY GEAR PUMP TRANSFER KIT

1/2” NPT

350-0601-XX

1-WAY VANE PUMP TRANSFER KIT

1/2” NPT

350-0602-XX

2-WAY VANE PUMP TRANSFER KIT

1/2” NPT

350-0801-XX

1-WAY VANE PUMP TRANSFER KIT

1/2” NPT

350-0802-XX

2-WAY VANE PUMP TRANSFER KIT

1/2” NPT

*XX = VOLTAGE

C60 - C80 DECK WASH KITS FEATURES

GROCOy C-60 and C-80 deck wash kits deliver flow and pressure on demand for tough anchor wash and deck wash jobs. Vane Pumps provide greater performance than diaphragm or flexible impeller pumps.

■ ■ ■ ■ ■

Saltwater nozzle is included. Up to 6.5GPM (C-60) or 7.5GPM (C-80) in the 20-40 PSI pressure range. "Ignition Protected" Permanent magnet ball bearing motor has #316 SS shaft. Continuous duty shaft seal. C-80 has replaceable motor brushes. C-60 AND C-80 DECK WASH KITS come complete with Spray Nozzle (PGN-50) and Check Valve (CV-75)

C-60 AND C-80 DIMENSIONS

PUMPS & ACCESSORIES

2011

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

C-60 AND C-80 SAMPLE INSTALLATION GROCOy 37

261


PLUMBING & PUMPS

CENTRIFUGALS

MARINE - OVERVIEW Centrifugals are silent running pumps that are simple to service and operate, and will handle small solids without pump damage. They provide high GPM flow but relatively low pressure. Years of trouble-free service can be expected without servicing filters or check valves. Centrifugals will not selfprime; a flooded inlet is required.

RETAIL PACKAGING

CP-20

17 GPM flow is ideal for baitwell circulation or any onboard pumping job that needs high GPM flow but relatively low pressure. ■ Inlet is threaded 3/4" NPT. ■ Discharge is threaded 1/2” NPT inside. Garden Hose Adaptor is included. ■ Motor is "Ignition Protected" and has a #316SS shaft. ■ Continuous duty mechanical shaft seal.

CP-30

■ ■ ■

CP-30 is identical to CP-20 except that is offers externally replaceable motor brushes. No-rust plastic base. Inlet is threaded 3/4" NPT. Discharge is threaded 1/2” NPT inside. Garden hose adaptor is included. Continuous-duty shaft seal and "Ignition Protection" motor with #316 SS shaft.

CP-20-S AND CP-30-S ■

Universal mount bracket allows 360o pump rotation.

Combines CP-20 performance with full submersibility. ■ Inlet is threaded 3/4" NPT. ■ Discharge is threaded 1/2” NPT inside. Garden Hose Adaptor is included. ■ "Ignition Protected" ball bearing motor. ■

CB-10

Combines CP-20 performance with a light weight non-metallic pump. ■ No-rust plastic base. ■ Inlet and outlet are threaded for garden hose or for 1" ID hose. ■ Continuous-duty "Ignition Protection" motor with #316 SS shaft. ■ Continuous-duty shaft seal. ■

38

262

GROCOy

2011

PUMPS & ACCESSORIES

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


PLUMBING & PUMPS

CENTRIFUGALS

INDUSTRIAL AND AUTOMOTIVE - OVERVIEW Centrifugals are silent running and easy to service. Long-life motor brushes are used for anticipated continuous-duty operation. Construction is suitable for non-explosive chemical environments such as engine coolant circulation, typically a 50/50 mixture of ethylene glycol and water at temperatures as high as 200O F.

CP-20-BB

CP-20-BB AND CP-30 BB ■ ■ ■ ■ ■

■ ■

Inlet and outlet for 1" ID hose. Bronze construction. #316 SS motor shaft. Continuous-duty face seal. Angled inlet and outlet for 1" ID hose keep hoses low to the floor. "Ignition Protected" ball bearing motor. Metal Base.

CP-30-BB

CP-20-BBWA ■ ■ ■ ■ ■ ■

Bronze construction. #316 SS motor shaft. Continuous-duty face seal. Inlet and outlet are 1/2" NPT. "Ignition Protected" ball bearing motor. Metal Base.

CP-20-BBC ■

Bronze construction.

#316 SS motor shaft. Continuous-duty face seal. Inlet is 3/4" NPT; outlet is 1" ID hose barb. "Ignition Protected" ball bearing motor. Metal Base.

■ ■ ■ ■

200-0006 ■ ■ ■ ■ ■

Non-corroding plastic pump housing. #400 series SS motor shaft. Continuous-duty face seal. Inlet and outlet for 1" ID hose. Metal Base,

PUMPS & ACCESSORIES

2011

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

GROCOy 39

263


PLUMBING & PUMPS

P-9000 and P-9000-1 ROTARY PUMPS THE CONCEPT Improved pump design has screw-on seal end cap. P-9000 and P-9000-1 are two-stage self-priming positive displacement pumps. Their construction (bronze, stainless steel, Teflon\ and Delriny) makes them suitable for pumping nearly any non-flammable and non-explosive fluid with low solids content. (Use a GROCOy WSB series strainer if solids are likely to be encountered in the fluid being pumped). External drive is required (1750 RPM max) either direct or with pulley and belt.

P-9000 OR P-9000-1 PUMPS

The difference between P-9000 and P-9000-1 is the impeller and cam design. P-9000 is for applications where occasional dry running may be encountered. P-9000-1 is for lower GPM, higher PSI applications when dry running is not likely.

P-9000 DIMENSIONS

ROTARY PUMP KITS THE CONCEPT PJRW and PSRW are comprised of a P-9000 pump and a drive motor, and must be turned on and off by the user, usually with a foot switch or a toggle switch located near the pump. The most common application is for high pressure anchor washdown. No controls, plumbing or dry running protection is included, thus these are the responsibility of the user. Performance is shown in the "P-9000 Performance With Water" graph. PSRO is comprised of a P-9000-1 pump and a drive motor that includes a reversing switch to change the direction of flow. Oil change and fuel transfer are the most common applications. No plumbing or dry running protection is included, thus these are the responsibility of the user. Performance may be calculated from the "P-9000 Performance With Water" graph; P-9000-1 GPM flow will be approximately 75% of P-9000 flow while 50% greater PSI pressure may be achieved.

PSRO OR PSRW

MODEL

PJRW 12V PJRW 24V PSRO 12V PSRO 24V PSRO 115VAC PSRW 12V PSRW 24V PSRW 115VAC

USE FOR

BREAKER

LENGTH

WIDTH

HEIGHT

WEIGHT

PKG

COMMENT

Deck Wash Deck Wash Oil Change Oil Change Oil Change Deck Wash Deck Wash Deck Wash

30-amp 15-amp 50-amp 30-amp 10-amp 50-amp 30-amp 10-amp

8.50" 8.50" 20.50" 20.50" 20.50" 20.50" 20.50" 20.50"

8.25" 8.25" 5.50" 5.50" 5.50" 5.50" 5.50" 5.50"

4.50" 4.50" 8.25" 8.25" 8.25" 8.25" 8.25" 8.25"

13.0# 13.0# 37.0# 37.0# 37.0# 37.0# 37.0# 37.0#

1 1 1 1 1 1 1 1

Uses P-9000 Uses P-9000 Uses P-9000-1 Uses P-9000-1 Uses P-9000-1 Uses P-9000 Uses P-9000 Uses P-9000

PUMP ACCESSORIES AS-100 BILGE PUMP SWITCH ■

■ ■

Switch turns bilge pump off and on by sensing changes in pressure (caused by rising or falling bilge water level) in its air tube. No floats to stick or fill with water. Approximate levels are "ON" at 2-3/4" of bilge level and "OFF" at 1". Use with a pump that draws up to 10-amps running continuously or up to 20-amps running intermittently.

40

264

GROCOy

PGN-50 SALT WATER NOZZLE ■ ■

The original - the nozzle from which all others are copied. Non-corroding plastic nozzle with stainless steel return spring will outlast ordinary hardware store nozzles. PGN-50 is standard equipment with C-60 and C-80 deck wash kits.

2011

PUMPS & ACCESSORIES

Equipment Catalogue 2013 /JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


INDEX

INDEX A Anodes Engine Anodes Pencil anodes - Anode Only 2, 6 Pencil anodes - With Plug 2

Hull Anodes

Catalina Gourmet BBQ 103 Chefsmate Gas Grill 105 Marine Kettle II 101, 104 Monterey Gourmet BBQ 104 Newport Gourmet BBQ 103 Trailmate Gas Grill 105

Boarding Ladders

Streamlined Bolt On Anodes 4 Streamlined Plate Anodes 3 Tear Drop Shaped Anodes 4

Outboard, Saildrive & Sterndrive Anodes Anode Kits 7 Honda Anodes 5, 7 Mercury & Mercruiser Anodes 5 OMC / Johnson ANODES 7 Volvo Anodes 7 Yamaha Anodes 6 Yanmar Anodes 6

Prop Nut Anodes Max Prop nut Anodes 3 Mercury bravo iii PROP NUT ANODE 3 Prop nut Anodes - anode only 3 Prop nut Anodes - complete 3

Prop Shaft Anodes Prop shaft anodes - limited clearance 1 Prop shaft anodes - streamlined 1

Rudder & Trim Tab Anodes 2 Rudder & Trim Tab Anodes 2 Trim Tab Anode 2

Antenna Standoff 175 Anti rattle sash fastener 160 Autopilot Interface 72 Auxiliary propulsion unit (APU) 36

B

boarding ladder - top mount telescoping 162 boarding ladder - top mount telescoping wide model 162 boarding ladder - under mount - telescoping - fixed 162 boarding ladder - under mount - telescoping with slide 162

Bollards bollard - split 163

Bolts barrel bolt 150 slide bolt 150

Bow Rollers

bow roller - fixed 160 bow roller - fixed with pin 160 bow roller - hinged with pin 160

Bow & Stern Thrusters 37

C Cartridges 109 Catches catch - cabinet 150, 151 catch - cabinet - remote 151 catch - cupboard 150 catch - Push button 150

Chocks

Bait Table Mounts Horizontal Round Rail Mount 113 Levelock Rod Holder Mount 113 Locking Flush Deck Socket Mount 112 Locking Surface Deck Socket Mount 112 Single Deck Socket Mount 113 Socket Type Rod Holder Mount 113 Square Rail / Bulkhead Mount 113 Table Height Extension Kit 113

Bait Tables Bait/Filet mate Cutting & Serving Table 111 Economate Bait & Filet Table 111 First Mate - Dual Mount Table 111

Bathroomware 207, 209 Batteries Lifeline Deep Cycle Batteries 125 Lifeline Start Batteries 125

BBQ Accessories Fish & Vege Grill Tray 110 Gourmet BBQ Covers 108 Marine Cuisine BBQ Cook Book 109 Round BBQ Covers 100 Serving Shelf with Cutting Board 109 Stainless Steel Wok with lid 110

BBQ Mounts Deck Socket Mount 102 Extended Horizontal Round Rail Mount 107 Horizontal Round Rail Mount 106 Levelock Rod Holder Mount 106 Levelock - Vertical Round Rail Mount 106, 107, 108, 112, 113 Locking Flush Deck Socket Mount 106 Locking Surface Deck Socket Mount 106 Mount Extension 102 On Shore Legs 102 On Shore Stand 107 Powâ&#x20AC;&#x2122;r Grip Rod Holder Mount 102 Round Rail Mount 102 Socket Type Mount 107 Square Rail / Bulkhead Mount 102, 107

BBQs A10-803NZ-3 Chefsmate Replacement Parts 123 Budget BBQ - LPG 100

chocks - lift up 163 chocks Plastic 176 chocks - port & starboard 163 chocks - straight 163

circulating pumps 206 Circulation Pumps 198 Cleaners, Polishes & Waxes Acrylic Care - Cleaner & Polisher 12 Acrylic Scratch Remover 12 Oil sorbent Sheets 12 Sea Dish wash - Concentrate 16 Sea Soap 15 Teak Wonder - Bilge Cleaner Concentrate 12

Cleats 164, 165, 166 cleats Plastic 176 cleats - herreshoff 165 cleats - mooring 164 cleats - surface mount folding 165 cleats surfboard - flat 164 cleats surfboard - round 164

Cleats - herreshoff 165 Continuous Running PumpsetS (Heavy) 26 Continuous Running PumpsetS (Med) 26 Cookware 110 Custom 160

D Deck 168, 169 Deck Fills

deck fills & drain plugs - plastic 177 deck fills - manship 168

Deck Plates

deck plate & deck fill key 168 non skid deck plates - Plastic 176 deck plates - stainless steel 168

Door Hardware door bumper 151 door handle 152 door holder - exterior 151

Equipment Catalogue 2013/JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

door holder - interior 151 door lock set 152 door lock with turn button 152 sliding door lock & latch 153

Drawer knob 152

E Exhaust Waterlocks & Syphons 212, 214

F Flag pole socket 169 Floor panel anchors 153

G Gear hammock & hooks 151 Grab Handles - Plastic 176 Greases & Lubricants Multi Purpose Grease 16 Winch Grease 16 Winch Grease Spray 16

H Handrails

handrail - w/ flange & stud 169 handrail - w/ flange & thread for bolt 169

Hasp & Staples hasp & staples 154 hasp & staples - swivel eye 154

Hatches 4000 Series Access Hatches180o Opening 180 access hatches round 180 hatch - round 182 hatch - standard deck 181

Hatch Fittings hatch gas stays 189 hatch adjuster telescoping 154 hatch - clamp latch 155 hatch fastener - Knob 156 hatch fastener - T bar 156 hatch - locking cam latch 156 hatch spring holder 155

Hatch gas stays 189 Hatch - Low Profile 181 Hatch Low Profile Double Opening 181 Hawse Pipes hawse pipe - oval 170 hawse pipe - oval with cleats 170

Heater Accessories 192 Heaters Sigmar 100 Sigmar 120 Sigmar 170 Sigmar 180

191 191 191 191

Heat Exchangers & Exhaust Accessories 200 Heavy Duty Cylinders 40 Heavy Duty Header Tank 71 Heavy Duty Helm Valves 57, 66, 70 Hinge 158 HInge Offset 157 Hinges hinge - butt extruded fast pin 157 hinge - cuddy door 156 hinge - door 157 hinge - H - (Lift off) 156, 157 hinge - offset, self closing 156 hinge - plastic 177 hinge - Plastic Cupboard Hinge 177 hinge - Plastic Long Flat Hinge 177 hinge - self closing, flat 156 hinge - strap 158 hinge - T 158

INDEX1


INDEX hinge - table 159 snap apart hinges 176

ports - opening elliptical 183 ports - opening oval 183 ports - opening round 183 ports - opening rectangle 182

Holding Tank Cleaners Puryclean - Holding Tank Cleaner / Disinfection 12

Hooks fender hook 169

Housings & Adapters 74 Hull Cleaners Heavy Duty Boat Wash 13 Light Duty WASH & cANUBA wax finish 13 Medium Duty Hull and Gelcoat Cleaner 13 Yellow Stain Remover Gel 13

Hull Polishes Colour Restorer, Oxidation Remover 13 Medium Duty Marine Polish - Silicone free 14 Medium Duty Rubbing Oxidation Remover 13 Premium HArd Wax - With Teflon 14 Premium Polish - With Teflon 14

Hull Waxes Canuba Boat Wax 14 Cleaner & wax - Silicone Free 14 Marine Wax 14

Prop 1 Pump Chart 199 Pumps Diaphragm Pumps 249

Pumpsets Reversing Pumpset 25

vent - louvered 175 vent - mini clam 173 vent - round cowl 174 vent - tear drop cowl 174

W WAGNER HYDRAULIC STEERING 80 Water Heaters ITR Hurricane II 203, 204, 205 ITR WaterHeater 195

Water Treatment

R Regulator 109 Reversing Pumpsets 76 Rod 111 Rod Holders rod holder - clamp-on 172 rod holder - heavy duty - 30 degrees 172 rod holder - heavy duty - 90 degrees 172 rod holder - heavy duty - angular 172

Aqua Clean - No Chlorine 18 Clean-A-Tank 18 Pura-Tank - No Chlorine Water Tank Cleaner 18

Y YACHT STEERING SYSTEMS 84

Roll Fin Stabiliser 90 round 167, 168 Rudder Follow-Up Unit 75

S

I Inflatable Boat Care

Inflatable Boat Cleaner 15 Inflatable Boat Repair Kit 15

Insta-trim Tab Sets 92

L Latches latch - slam 171 latch - spring 170

Latch spring transom door 170 LED Lighting LED Replacement Nav Bulb 146

Lift Handles lift handle 159 lift handle - turning lock 171 lift handle - turning lock rectangular 170 lift handle - with catch 159 lift ring pull - rectangular 159 lift ring pull - round 159 lift ring - spring loaded 159

M Mast Step 171 Metal Cleaners & Polishes Heavy Duty Stainless and Brass Polish - with Wax 15 Medium Duty Metal Polish - With Wax 15 Medium Duty Rust Converter 15

Mount Brackets Mount Brackets - Plastic outboard bracket 176

O Oval 167

Sailing Hardware bronze T track end stop 173

ss 175 SS Rod holder 172 Stabilisers 90 Stainless 155 Stainless Steel Gas Springs 189 Switches 202

T table leg fastener 158, 159 Table Leg Fastener 154 Tapes & Adhesives Anti Skid Tape 16 Captain Tollyâ&#x20AC;&#x2122;s Creeping Crack Cure 16 X-Treme TAPE Marine - Self Bonding Rigging Tape 17

T-Bar Chrome 155 Teak block single 173 Teak Care - Yachticon Interior Teak Oil 11 Teak Oil - Clear 11 Teak Oil - Golden Classic 11

Teak Wonder Teak Cleaners & Brighteners 11 Teak Dressing & Sealer 11

Thermostats 201 Thru Hulls transom exhaust - thru hull 175

Thru hull skin fittings 178 Bow & Stern Thrusters 37, 38 Thrusters, Bow & Stern 37 Toilet Maintenance purytech head treatment deodoriser system 17 Toilet Lubricating and Cleaning Oil 17

P

Trim Tabs

Pad eye - diamond 171 Panel Anchors 153 Plastic Bow Pop-Up Light 146 Plumbing 199 Portlight Chain 155 Ports

V

ports - fixed elliptical 183 ports - fixed oval 182 ports - fixed rectangle 182 ports - fixed round 183

INDEX2

Electronic Tab Locator Kits 92 Universal Motor Pump 92 Water proof switches 92

Vents

tank vents - flat plastic 178 tank vents - oval plastic 178 vent - butterfly 173 vent - fuel tank 174 Equipment Catalogue 2013 /JAN / Š So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz


INDEX

TERMS & CONDITIONS OF TRADE 1.

PRICES All prices quoted are exclusive of GST. Prices shown in a price list are subject to change without prior notice by So-Pac Marine Ltd and do not constitute an offer. Quotation for goods to be specifically imported by So-Pac Marine Ltd or a particular order is subject to confirmation on receipt of a firm order. Prices quoted are subject to change based on exchange rates, freight rates, insurance and customs duty.

2.

PAYMENT All payments for goods supplied are due to the company on the 20th of the month following the date of invoice. So-Pac Marine Ltd reserves the right to charge interest to the purchaser at So-Pac Marine’s trading bank base rate applicable, plus 2% calculated on a daily basis from the due date to the date of payment. Also So-Pac Marine Ltd reserves the right to on charge all collections costs incurred in recovering funds owed including interest. In addition So-Pac Marine Ltd may withhold delivery of further goods to the purchaser until the outstanding amount plus accrued interest is paid. Payment shall be made direct to the Head Office of So-Pac Marine. Where goods are imported especially on your behalf a non-refundable deposit may be requested. Such goods may not be returned for credit without prior agreement.

3.

FREIGHT So-Pac Marine will charge freight separately on all invoices. Urgent and overnight orders despatched at the client’s request will be charged at the actual freight cost unless otherwise agreed.

4.

MINIMUM ORDER So-Pac Marine reserves the right to charge a minimum order fee of $5.00 on orders below a $10.00 value.

5.

FORCE MAJEURE So-Pac Marine shall not be liable for any failure to perform the contract or supply any material, or for any delay or non-delivery due to strikes, fires, explosion, flood, riot, lockouts, injunctions, interruption of transportation, accidents, inability to obtain supplies at reasonable prices, war or apprehension of war, force majeure, governmental action or any other circumstance beyond So-Pac Marine’s control.

6.

TITLE Ownership of the goods shall not pass to the client until So-Pac Marine has received payment in full for the order. Payment required covers all charges included on the invoices and ownership does not pass until cheques or our bank clears other instruments. So-Pac Marine shall be entitled to repossess the goods if payment is not made or the client and So-Pac Marine do not reach an agreement re payment.

7.

RETURNS Non stock or indent lines will not be accepted back for credit. Other goods will only be accepted for credit on the following conditions and only if accompanied with details in full of the packing slip or invoice with which they were delivered and are in original packing and condition suitable for resale. All claims should be referred direct to our Auckland Office. a.

Goods incorrectly supplied by So-Pac Marine Ltd will be accepted back for credit, freight forward, provided So-Pac Marine is notified of the error within five (5) working days of receipt of the goods.

b.

Goods over ordered or incorrectly ordered by the customer will be accepted back for credit with the customer paying for the freight, provided approval for return is first sought from So-Pac Marine with in five (5) working days of receipt of the goods. A restocking fee may apply.

c.

Goods purchased from So-Pac Marine which are defective or damaged when received by the customer will be accepted for credit provided So-Pac Marine is notified within five (5) working days of receipt of goods.

8.

SUPPLY OF GOODS From time to time goods may be out of stock, in such cases, So-Pac Marine will automatically place the goods on back order and advise the customer of the situation. Unless specifically cancelled, goods will be supplied upon availability.

9.

LIMITATION OF LIABILITY So-Pac Marine’s liability for any claim whatsoever in respect of products sold hereunder, shall not exceed the price of the product. The customer assumes all risks and liability for the products purchased from So-Pac Marine and their use upon and after delivery, including their affect upon any person. Any and all warranties or conditions expressed, implied or statutory are expressly excluded except those which cannot be lawfully excluded.

10.

GENERAL Any disagreement between So-Pac Marine and the purchaser will be submitted to arbitration in accordance with the laws of New Zealand.

Equipment Catalogue 2013/JAN / © So-Pac Marine Limited Phone 09 448 5900 / Fax 09 448 5911 / info@sopac.co.nz / www.sopac.co.nz

INDEX3


www.sopac.co.nz

8-10 Volkner Pl, Albany, North Harbour, Auckland . ph (09) 448 5900 . fax (09) 448 5911 . e info@sopac.co.nz

Equipment cat sep 13 sm  

Marine equipment catalogue for New Zealand supplier, So-Pac Marine

Read more
Read more
Similar to
Popular now
Just for you