John Deere 218 DRAPER PLATFORM Parts Catalog Manual（PC1664）

A2 PLATFORM, DRAPER - 218

HP1521

-UN-01JAN94

JOHN DEERE 218 DRAPER PLATFORM

(SPECIFICATIONS AND DESIGN SUBJECT TO CHANGE WITHOUT NOTICE)

PLATFORM, DRAPER - 218 PC1664

(01-MAR-82)

5-1

PN=1

A3 PLATFORM, DRAPER - 218

SERIAL NUMBER PLATE

USE ALL NUMBERS, LETTERS, AND SPACES SHOWN ON THE SERIAL NUMBER PLATE IN WARRANTY CORRESPONDENCE. 218 DRAPER PLATFORM (

-579900)

ON THESE 218 DRAPER PLATFORMS, SERIAL NUMBER PLATE IS LOCATED ON THE LEFT-HAND SIDE OF THE FRAME. EXAMPLE: E0018579900 E - EQUIPMENT 0018 - PLATFORM MODEL 579900 - 218 DRAPER PLATFROM SERIAL NUMBER H - FACTORY (HARVESTER WORKS)

218 DRAPER PLATFORMS (579901-

)

ON THESE 218 DRAPER PLATFORMS, SERIAL NUMBER PLATE IS LOCATED ON THE LEFT-HAND SIDE OF THE FRAME. EXAMPLE: H00218D579901 218 DRAPER PLATFORM (FIRST LINE)

H0 - FACTORY (HARVESTER WORKS) 218 - PLATFORM MODEL D - CONFIGURATION/MODEL SUFFIX 579901 - SEQUENCE (SERIAL) NUMBER (SECOND LINE) 218 DRAPER PLATFORM - PRODUCT TYPE

5-2

PLATFORM, DRAPER - 218 PC1664

(03-NOV-86) PN=2

A4 PLATFORM, DRAPER - 218

IMPORTANT THIS PARTS CATALOG CONTAINS COMPLETE PARTS INFORMATION ON THE 218 DRAPER PLATFORM. VINTAGE IS DETERMINED BY SERIAL NUMBERS UNDER WHICH CUTTING PLATFORMS WERE MANUFACTURED. IT IS IMPORTANT THAT THE CORRECT SERIAL NUMBER BE USED WHEN ORDERING PARTS.

SERIAL NUMBER LISTING INFORMATION SERIAL NUMBER INFORMATION IS LISTED TO SHOW ON WHICH MACHINES EACH PART CAN BE USED; FOR EXAMPLE: THE PART CAN BE USED ON ALL MACHINES. 000000THE PART CAN BE USED ON ALL MACHINES BEGINNING WITH THE SERIAL NUMBER LISTED. -000000 THE PART CAN BE USED ON ALL MACHINES UP TO AND INCLUDING THE SERIAL NUMBER LISTED. 000000-000000 THE PART CAN BE USED ON ALL MACHINES BETWEEN AND INCLUDING THE SERIAL NUMBERS LISTED. WHEN XXXXXX’S ARE LISTED IN PLACE OF A SERIAL NUMBER, A SERIAL NUMBER CHANGE WAS MADE BUT THE EXACT SERIAL NUMBER WAS NOT AVAILABLE WHEN THE CATALOG WAS PRODUCED.

JDM REMANUFACTURED COMPONENTS THE SERVICE PARTS LISTED IN THIS CATALOG ARE INTENDED FOR THE REPAIR OF ORIGINAL EQUIPMENT COMPONENTS. ALTHOUGH MOST SERVICE PARTS MAY BE USED TO REPAIR REMANUFACTURED COMPONENTS, THE REMANUFACTURED DESIGN MAY CHANGE PARTS SUFFICIENTLY SO THAT SERVICE PARTS ARE INADEQUATE OR NOT USABLE.

BOLT AND CAP SCREW STRENGTH IDENTIFICATION BOLTS AND CAP SCREWS REQUIRED TO HAVE HIGH-STRENGTH QUALITIES EQUIVALENT TO SAE GRADE 8 ARE IDENTIFIED THROUGHOUT THIS CATALOG BY THE DESCRIPTION HS SAE 8. ALL STANDARD BOLTS AND CAP SCREWS ARE SAE GRADE 5 OR LOWER.

COMPLETE GOODS LISTINGS COMPLETE GOODS ARE LISTED IN BOLD FACE TYPE. ORDER SEPARATELY. DO NOT INCLUDE ON REPLACEMENT PARTS ORDER.

SI UNITS OF MEASURE METRIC DIMENSIONS ARE GIVEN, WHERE APPLICABLE, THROUGHOUT THIS PARTS CATALOG.

CHANGE INDICATOR LINE (MICROFICHE CATALOGS ONLY) CHANGES AFFECTING THE ORDERING OF PARTS ARE IDENTIFIED BY VERTICAL LINES MARKED IN THE LEFTHAND MARGIN OF REVISED PARTS LISTING IMAGES. A LINE IS ALSO AT THE LEFT-HAND EDGE OF THE SAME PART NUMBER IN THE NUMERICAL INDEX TO SHOW THE LOCATION OF REVISED INFORMATION.

PLATFORM, DRAPER - 218 PC1664

(03-NOV-86)

5-3

PN=3

A5 PLATFORM, DRAPER - 218

SECTIONAL INDEX SECTION GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05 REEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 FRAME, STRIPPERS, DIVIDERS, AND PLATES . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 KNIFE, CUTTERBAR, AND DRIVES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 AUGER AND DRIVE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 SHIELDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 BELTS, CHAINS, SHEAVES, SPROCKETS, AND DECALS . . . . . . . . . . . . . . . . . . . . . . . . 40 NUMERICAL INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

5-4

PLATFORM, DRAPER - 218 PC1664

(03-DEC-81) PN=4

Thanks very much for your reading, Want to get more information, Please click here, Then get the complete manual

NOTE: If there is no response to click on the link above, please download the PDF document first, and then click on it.

Have any questions please write to me: admin@servicemanualperfect.com

A6 PLATFORM, DRAPER - 218 ALPHABETICAL INDEX GRID

PAGE

GRID

A A11 A12 B13

ARM, REEL............................................................................

ARM, REEL............................................................................

AUGER, CROSS ..................................................................

10 - 4 10 - 5 25 - 4

B C9 B5

BELT, DRIVE, ON L.H. SIDE ..............................................

BOLTED GUARDS AND KNIVES ........................................

40 - 3 20 - 10

C A23 A12 C8 C3 B13 B12 B13 B13 A25 A12 C1 B23

CASE, KNIFE DRIVE ............................................................

CHAIN, CYL. ROD EXTENSION ..........................................

CHAINS, DRIVE, ON RIGHT-HAND SIDE ..........................

CONVERSION HOSES AND COUPLERS ..........................

CROSS AUGER ....................................................................

CROSS AUGER DRIVE ........................................................

CROSS AUGER SHAFT ......................................................

CROSS AUGER SPROCKETS ............................................

CUTTERBAR DRIVE ............................................................

CYLINDER ROD EXTENSION..............................................

CYLINDER, MASTER, HYDRAULIC LIFT REEL ................

CYLINDER, SLAVE, HYDRAULIC LIFT REEL ....................

20 - 2 10 - 5 40 - 1 30 - 14 25 - 4 25 - 3 25 - 4 25 - 4 20 - 4 10 - 5 30 - 12 30 - 9

D C11 A19 A16 C2 B9 B9 C2 B1 B1 B8 A16 A16 A23 B12 A25

DECALS, R.H. AND L.H. ......................................................

DIVIDER POINTS ..................................................................

DRAPER BELT ......................................................................

DRAPER DIVIDER POINT ....................................................

DRAPER DRIVE ROLL HOUSINGS ....................................

DRAPER DRIVE ROLLS ......................................................

DRAPER DRIVE TIGHTENER..............................................

DRAPER IDLER ROLLS ......................................................

DRAPER IDLER ROLLS AND SUPPORTS ........................

DRAPER SHIELDS AND SUPPORTS ................................

DRAPER SLAT ......................................................................

DRAPERS ..............................................................................

DRIVE CASE, KNIFE ............................................................

DRIVE, CROSS AUGER ......................................................

DRIVE, CUTTERBAR ............................................................

40 - 5 15 - 4 15 - 1 30 - 13 20 - 14 20 - 14 30 - 13 20 - 6 20 - 6 20 - 13 15 - 1 15 - 1 20 - 2 25 - 3 20 - 4

E A12

EXTENSION CYL. ROD........................................................

PAGE

H C3 B22 B9 B1 B22 C1 B18 B20 B23 B24 B16 B17 B24

HOSE AND COUPLER CONVERSION ................................

HOSES, HYDRAULIC DRIVE REEL, PICKUP ....................

HOUSING, DRAPER DRIVE ROLLS....................................

HOUSING, DRAPER IDLER ROLLS ....................................

HYDRAULIC DRIVE REEL HOSES, PICKUP REEL ..........

HYDRAULIC LIFT REEL MASTER CYLINDER ..................

HYDRAULIC LIFT REEL OIL LINES ....................................

HYDRAULIC LIFT REEL OIL LINES ....................................

HYDRAULIC LIFT REEL SLAVE CYLINDER ......................

HYDRAULIC MOTOR, HYDROSTATIC DRIVE REEL ........

HYDRAULIC REEL LINES ....................................................

HYDRAULIC REEL LINES ....................................................

HYDROSTATIC DRIVE REEL HYDRAULIC MOTOR..........

30 - 14 30 - 8 20 - 14 20 - 6 30 - 8 30 - 12 30 - 4 30 - 6 30 - 9 30 - 10 30 - 1 30 - 3 30 - 10

I A22

IDLER, KNIFE DRIVE ..........................................................

20 - 1

K A23 A22 B5 B3 B5 B3

KNIFE DRIVE CASE ............................................................

KNIFE DRIVE IDLER AND TIGHTENER ............................

KNIFE HEAD, BOLTED ........................................................

KNIFE HEAD, RIVETED ......................................................

KNIVES AND GUARDS, BOLTED........................................

KNIVES AND GUARDS, RIVETED ......................................

20 - 2 20 - 1 20 - 10 20 - 8 20 - 10 20 - 8

L C11 B18 B20 B18 B16 B17 A19

L.H. DECALS ........................................................................

LIFT REEL OIL LINES, HYDRAULIC ..................................

LIFT REEL, OIL LINES, HYDRAULIC ..................................

LINES, HYDRAULIC LIFT REEL ..........................................

LINES, HYDRAULIC REEL ..................................................

LINES, REEL, HYDRAULIC ..................................................

LOOP DIVIDER ....................................................................

40 - 5 30 - 4 30 - 6 30 - 4 30 - 1 30 - 3 15 - 4

M C1 B24 B25 A23

MASTER CYLINDER, HYDRAULIC LIFT REEL ..................

MOTOR, HYDRAULIC, HYDROSTATIC DRIVE REEL........

MOTOR, REEL ......................................................................

MOUNTING, KNIFE DRIVE CASE ......................................

30 - 12 30 - 10 30 - 11 20 - 2

10 - 5

O F A20 A17 A18

FEED PLATES ......................................................................

FLOOR STRIPPER................................................................

FRAME ..................................................................................

B18 B20 15 - 5 15 - 2 15 - 3

G B5 B3

GUARDS AND KNIVES, BOLTED........................................

GUARDS AND KNIVES, RIVETED ......................................

PLATFORM, DRAPER - 218 PC1664

(09-JAN-89)

20 - 10 20 - 8

OIL LINES, HYDRAULIC LIFT REEL ..................................

OIL LINES, HYDRAULIC LIFT REEL ..................................

30 - 4 30 - 6

P A9 A13 A13 A10 B22 A12 A20 A19

PICKUP REEL ......................................................................

PICKUP REEL DRIVE SHAFTS AND MOUNTINGS ..........

PICKUP REEL DRIVE SHAFTS AND SPROCKETS ..........

PICKUP REEL ECCENTRIC SPIDER ..................................

PICKUP REEL, HYDRAULIC DRIVE REEL HOSES ..........

PIN, REEL ARM ....................................................................

PLATES, FEED......................................................................

POINTS, DIVIDER ................................................................

10 - 1 10 - 6 10 - 6 10 - 3 30 - 8 10 - 5 15 - 5 15 - 4

5-5

PN=5

A7 PLATFORM, DRAPER - 218 ALPHABETICAL INDEX - CONTINUED GRID

PAGE

GRID

PAGE

R C11 A11 A12 B17 C1 B25 A9 A10 B3 B9 B1

R.H. DECALS ........................................................................

REEL ARM ............................................................................

REEL ARM ............................................................................

REEL LINES, HYDRAULIC ..................................................

REEL MASTER CYLINDER, HYDRAULIC LIFT ..................

REEL MOTOR ......................................................................

REEL, PICKUP ......................................................................

REEL, PICKUP, ECCENTRIC SPIDER ................................

RIVETED GUARDS AND KNIVES ......................................

ROLLS, DRAPER DRIVE ......................................................

ROLLS, DRAPER IDLER ......................................................

40 - 5 10 - 4 10 - 5 30 - 3 30 - 12 30 - 11 10 - 1 10 - 3 20 - 8 20 - 14 20 - 6

S B13 B9 A13 A23 C9 A22 A22 C6 C6 A13 B8 C6 A10 C8 B13 B12 C2 A12 A17 A17 B1 B8

SHAFT, CROSS AUGER ......................................................

SHAFTS, DRAPER DRIVE ROLLS ......................................

SHAFTS, DRIVE, PICKUP REEL ........................................

SHEAVE, KNIFE DRIVE CASE ............................................

SHEAVES ON L.H. SIDE......................................................

SHEAVES, KNIFE DRIVE IDLER ........................................

SHEAVES, KNIFE DRIVE TIGHTENER ..............................

SHIELD ..................................................................................

SHIELD SKID SHOE ............................................................

SHIELD, PICKUP REEL DRIVE ..........................................

SHIELDS, DRAPER ..............................................................

SHOE, SKID, SHIELD ..........................................................

SPIDER, PICKUP REEL ECCENTRIC ................................

SPROCKETS ON R.H. SIDE ................................................

SPROCKETS, CROSS AUGER............................................

SPROCKETS, CROSS AUGER DRIVE................................

SPROCKETS, DRAPER DRIVE TIGHTENER ....................

STOP, CYL. ROD EXTENSION............................................

STRIPPER ............................................................................

STRIPPER, FLOOR ..............................................................

SUPPORTS AND DRAPER IDLER ROLLS ........................

SUPPORTS AND DRAPER SHIELDS ................................

25 - 4 20 - 14 10 - 6 20 - 2 40 - 3 20 - 1 20 - 1 35 - 1 35 - 1 10 - 6 20 - 13 35 - 1 10 - 3 40 - 1 25 - 4 25 - 3 30 - 13 10 - 5 15 - 2 15 - 2 20 - 6 20 - 13

T C2 A22 C9 C8

5-6

TIGHTENER, DRAPER DRIVE ............................................

TIGHTENER, KNIFE DRIVE ................................................

TIGHTENERS ON L.H. SIDE................................................

TIGHTENERS ON R.H. SIDE ..............................................

30 - 13 20 - 1 40 - 3 40 - 1

PLATFORM, DRAPER - 218 PC1664

(09-JAN-89) PN=6

A9 REEL PICKUP REEL H29867F

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

-UN-01JAN94

PART NO.

AH97185 03H1810 14H786 H33316 H33317 H33318 AH97194 AH97195 E40203 E40202 E45229 E40205 E40206 AH97207 19H1905 12H303 14H785 AH97208 H98690 19H1849 12H303 14H785 19H2020 12H303 14H785

PART NAME

SHAFT BOLT NUT FINGER CLIP RIVET SLAT SLAT U-BOLT LOCK NUT LOCK NUT CAP BASE ARM CAP SCREW LOCK WASHER NUT PLATE PLATE CAP SCREW LOCK WASHER NUT CAP SCREW LOCK WASHER NUT

PLATFORM, DRAPER - 218 PC1664

(09-JAN-89)

QTY

6 144 144 258 258 258 6 12 24 48 48 24 24 24 24 24 24 4 4 24 24 24 48 48 48

SERIAL NO.

REMARKS

1/4" X 1-1/2" 1/4"

CENTER R.H. AND L.H. -585895

(SUB E45229)

5/16" X 1" 5/16" 5/16" STIFFENING SPIDER 5/16" X 1-1/4" 5/16" 5/16" 5/16" X 1/2" 5/16" 5/16"

10-1

PN=7

REEL MEMORANDA

10-2

PLATFORM, DRAPER - 218 PC1664

(09-JAN-89) PN=8

A10 REEL PICKUP REEL ECCENTRIC SPIDER HP1420

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

-UN-01JAN94

PART NO.

E59584 H33332 H33333 AH97221 E40212 E59585 AH97217 AH97218 E40203 E40202 E45229 E40205 E40206 AH97207 H98692 H98693 19H1900 12H303 14H785 19H2020 12H303 14H785 03H1893 E40202 E45229 H98764

PART NAME

FLANGE NUT FINGER FINGER STRAP SPACER BOLT FINGER FINGER U-BOLT LOCK NUT LOCK NUT CAP BASE ARM PLATE RING CAP SCREW LOCK WASHER NUT CAP SCREW LOCK WASHER NUT BOLT LOCK NUT LOCK NUT BRACE

PLATFORM, DRAPER - 218 PC1664

(09-JAN-89)

QTY

12 6 6 12 12 12 6 6 12 24 24 12 12 12 2 2 12 12 12 12 12 12 36 36 36 36

SERIAL NO.

REMARKS

(RIGID) R.H. AUXILIARY (RIGID) L.H. AUXILIARY (RIGID) (RIGID) (RIGID) (RIGID) R.H. (RIGID) L.H. (RIGID) -585895

(SUB E45229)

-585895

5/16" X 3/4" 5/16" 5/16" 5/16" X 1/2" 5/16" 5/16" 1/4" X 1/2" (SUB E45229)

10-3

PN=9

A11 REEL REEL ARM (SERIAL NO. -582725) HP1871

KEY

1

2 3

4 5 6 7 8 9 10 11 12

10-4

-UN-01JAN94

PART NO.

19H1909 19H2000 12H236 14H794 M63139 AH92212 AH112089 AH92211 AH112088 H98698 H87048 H98494 11H236 H87239 H94005 H98494 M48519 19H1734 12H294 14H1039 24H1368

PART NAME

CAP SCREW CAP SCREW LOCK WASHER NUT BUSHING ARM LIFT ARM ARM LIFT ARM LATCH SCREW PIN COTTER PIN RETAINER STOP PIN PIN CAP SCREW LOCK WASHER NUT WASHER

QTY

1 1 2 2 4 1 1 1 1 2 4 2 4 2 2 1 1 2 2 2 4

SERIAL NO.

REMARKS

3/4" X 3-3/4", (R.H.) 3/4" X 5", (L.H.) 3/4" 3/4" -582725 -582725

(L.H.) (SUB AH112089) (L.H.) (R.H.) (SUB AH112088) (R.H.) STOP SELF-TAPPING DRILLED 1/8" X 1" STOP (L.H.) DRILLED (R.H.) DRILLED 5/8" X 2" 5/8" 5/8" 21/32" X 1-5/16" X 0.090"

PLATFORM, DRAPER - 218 PC1664

(08-NOV-83) PN=10

A12 REEL REEL ARM (SERIAL NO. 582726HP1872

KEY

1

2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

)

-UN-01JAN94

PART NO.

19H1909 19H2000 12H236 14H794 M63139 24H1368 19H1734 12H294 14H1039 11H236 H98765 H105501 H25099 H105498 H105499 H118628 AH104396 H98494 M48519 AH104090 H76139 H87239 AH112089 AH112088

PART NAME

CAP SCREW CAP SCREW LOCK WASHER NUT BUSHING WASHER CAP SCREW LOCK WASHER NUT COTTER PIN PIN EXTENSION SNAP RING NUT RING RING STOP PIN PIN LINK CHAIN SCREW RETAINER LIFT ARM LIFT ARM

PLATFORM, DRAPER - 218 PC1664

(12-APR-85)

QTY

1 1 2 2 4 4 2 2 2 4 2 2 2 2 2 2 2 1 1 2 2 2 1 1

SERIAL NO.

REMARKS

3/4" X 3-3/4", R.H. 3/4" X 5", L.H. 3/4" 3/4" 21/32" X 1-5/16" X 0.090" 5/8" X 2" 5/8" 5/8" 1/8" X 1" (TOP)

-600000

(SUB H118628) L.H. (DRILLED) R.H. (DRILLED)

L.H. R.H.

10-5

PN=11

A13 REEL PICKUP REEL DRIVE SHAFTS, MOUNTINGS, AND SPROCKETS H29870F

10-6

-UN-01JAN94

THIS PARTS LISTING IS CONTINUED PLATFORM, DRAPER - 218 PC1664

(09-JAN-89) PN=12

A14 REEL PICKUP REEL DRIVE SHAFTS, MOUNTINGS, AND SPROCKETS - CONTINUED KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

22 23 24 25 26 27 28 29 30 31 32

PART NO.

03H1495 12H304 H20024 AH97211 AH97165 19H1732 12H304 H20024 24H1553 26H46 H98743 19H1765 12H304 14H812 AE24403 JD7759 24H1520 22H853 14H732 AH88831 AH97012 24H1136 19H1900 12H303 22H818 14H611 AH96655 AH96647 03H1764 12H301 14H1040 AH94876 AH116646 AH96948 AH116647 19H1792 12H301 AH92327 AH92328 C3142E H93483 14H821 E54809 H81277 24H1111 08H4654 H87360 26H22 H89110

PART NAME

BOLT LOCK WASHER LOCK NUT SHAFT SHAFT CAP SCREW LOCK WASHER LOCK NUT WASHER SHAFT KEY BUSHING CAP SCREW LOCK WASHER NUT BALL BEARING LUBRICATION FITTING WASHER SET SCREW NUT CHAIN SPROCKET SHIELD WASHER CAP SCREW LOCK WASHER SET SCREW NUT CHAIN SPROCKET LINK CHAIN BOLT LOCK WASHER NUT BRACKET SUPPORT BRACKET SUPPORT CAP SCREW LOCK WASHER BRACKET BRACKET SNAP RING SET SCREW NUT LOCK NUT BUSHING WASHER CAP SCREW SHIM SHAFT KEY TRUNNION

PLATFORM, DRAPER - 218 PC1664

(09-JAN-89)

QTY

6 6 6 2 1 6 6 6 4 2 4 6 6 6 6 2 2 4 4 2 2 4 4 4 4 4 2 2 8 8 8 1 1 1 1 2 2 1 1 2 2 2 2 2 2 2 2 2 2

SERIAL NO.

REMARKS

3/8" X 1-1/2" 3/8" CENTER 3/8" X 1-1/4" 3/8" 1-5/8" X 2-1/4" X 0.194" 3/8" X 2-1/8" 3/8" X 1-3/4" 3/8" 3/8" 1-15/32" X 2" X 0.105" 3/8" X 7/8" 3/8" 81 TEETH, DRIVEN

-611000 -611000

11/32" X 11/16" X 0.065" 5/16" X 3/4" 5/16" 5/16" X 3/4" 5/16" 13 TEETH ROLLER, DRIVE, TYPE 50, 5/8" PITCH, 164 LINKS 1/2" X 1-3/4" 1/2" 1/2" (SUB AH116646) (R.H.) (SUB AH116647) (L.H.) 1/2" X 1" 1/2" (R.H.) (L.H.) 5/8" 17/32" X 1-1/16" X 0.090" 1/2" X 7-1/2" 1/4" X 1"

10-7

PN=13

REEL MEMORANDA

10-8

PLATFORM, DRAPER - 218 PC1664

(17-NOV-82) PN=14

A16 FRAME, STRIPPERS, DIVIDERS, AND PLATES DRAPERS H29871F

KEY

1 2 3 4 5 6 7 8 9 10 11

-UN-01JAN94

PART NO.

H92518 P41339 H31621 P41338 P13759 H31622 AH92156 AH92157 AP20769 H31624 H78717 AH92155

PART NAME

SLAT RIVET CLIP RIVET WASHER WASHER BELT BELT GROMMET CLAMP PIN CONVEYOR

QTY

5 20 10 16 16 16 2 2 20 5 2 1

SERIAL NO.

REMARKS

SLAT END LEATHER BURR, RIVET DRIVE, INNER DRIVE, OUTER

NOTE: QUANTITIES SHOWN ARE FOR ONE UNIT. THREE UNITS USED PER MACHINE.

PLATFORM, DRAPER - 218 PC1664

(09-JAN-89)

15-1

PN=15

A17 FRAME, STRIPPERS, DIVIDERS, AND PLATES REAR STRIPPER H29883F

KEY

1 2 3

-UN-01JAN94

PART NO.

H97193 H97194 03H1500 N10215 03H1765 N10215

PART NAME

STRIPPER STRIPPER BOLT LOCK NUT BOLT LOCK NUT

QTY

SERIAL NO.

1 1 4 4 14 14

REMARKS

(R.H.) (L.H.) 3/8" X 1" 3/8" X 3/4"

FLOOR STRIPPER H32557F

KEY

1 2

15-2

-UN-01JAN94

PART NO.

AH103318 H109698 03H1540 N10213

PART NAME

STRIPPER STRIPPER BOLT LOCK NUT

QTY

2 2 4 4

SERIAL NO.

-483410

REMARKS

(SUB H109698) 5/16" X 3/4"

PLATFORM, DRAPER - 218 PC1664

(01-MAR-82) PN=16

A18 FRAME, STRIPPERS, DIVIDERS, AND PLATES FRAME HP3593

KEY

1 2 3

-UN-01JAN94

PART NO.

AH103317 AH111264 19H1756 12H294 H20895 N72306

4 5A 5B 6A

24H1825 H91615 H137143 09H1587 12H304 14H1039 6B 19M7784 7 ..................

8 9 10 11 12 13 14 15 16 17 18 19 20 21

g

.................. .................. ..................

H136751 AH132905 AH132906 24H1327 24H1111 03H1659 12H301 14H1040 H113371 AH96757 03H1268 12H303 14H785 AH96758 H87337 24H1111 19H2062 14H1040 03H1540 N10213

PART NAME

QTY

SERIAL NO.

FRAME FRAME CAP SCREW LOCK WASHER WASHER WASHER

1 1 2 2 2 2

-600000

WASHER PLATE PLATE BOLT LOCK WASHER NUT SCREW REINFORCEMENT

4 2 1 4 4 4 2 1

-621250 -621250

REINFORCEMENT PLATE PLATE DECAL PIN PIN WASHER WASHER BOLT LOCK WASHER NUT FLOOR SHIELD BOLT LOCK WASHER NUT SHIELD PIN WASHER CAP SCREW NUT BOLT LOCK NUT

1 1 1 1 1 1 4 2 2 2 2 1 1 8 8 8 1 5 14 7 7 4 4

PLATFORM, DRAPER - 218 PC1664

(09-JAN-89)

-622200

-621250 -621250 -621250

REMARKS

(SUB AH111264) 5/8" X 1-1/2" 5/8" (SUB N72306) 16.662 X 50.800 X 6.350 MM (21/32" X 2" X 1/4") 11/16" X 1-1/2" X 0.194" 5/8" X 2" 3/8" 5/8" M10 X 20 L.H. LATCH PIN PLATE (USE WITH QUIK-TACK OR NEW SERVICE FRAME) R.H.(USE WITH QUIK-TACK OR NEW SERVICE FRAME) (INSTALLED ON L.H. SIDE OF BACKSHEET ONLY) R.H. (LATCH PIN ASSY) L.H. (LATCH PIN ASSY) 15/32" X 1-1/8" X 7/64" 17/32" X 1-1/16" X 0.090" 1/2" X 1" 1/2" 1/2" (ARC WELDED) R.H. (8820) 5/16" X 3/4" 5/16" 5/16" L.H. (8820) ADJUSTING 17/32" X 1-1/16" X 0.090" 1/2" X 4" 1/2" 5/16" X 3/4"

15-3

PN=17

A19 FRAME, STRIPPERS, DIVIDERS, AND PLATES DIVIDER POINTS H29885F

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

15-4

-UN-01JAN94

PART NO.

24H1111 24H1305 H96365 24H1305 10H1026 12H304 14H812 03H1500 12H304 14H812 03H1659 12H301 14H1040 03H1731 12H301 14H1040 H96364 24H1136 16H1357 19H1801 H95174 AH93794 19H1906 12H303 14H785 AH92459

PART NAME

WASHER WASHER SHOE WASHER BOLT LOCK WASHER NUT BOLT LOCK WASHER NUT BOLT LOCK WASHER NUT BOLT LOCK WASHER NUT SHOE WASHER RIVET CAP SCREW LOCK NUT POINT CAP SCREW LOCK WASHER NUT CROP DIVIDER

QTY

2 8 1 2 2 2 2 8 8 8 5 5 5 2 2 2 1 4 2 2 2 2 4 4 4 2

SERIAL NO.

REMARKS

17/32" 13/32" (L.H.) 13/32" 3/8" X 3/8" 3/8" 3/8" X 3/8" 3/8" 1/2" X 1/2" 1/2" 1/2" X 1/2" 1/2" (R.H.) 11/32" 3/8" X 3/8" X

X 1-1/16" X 0.090" X 13/16" X 0.065" X 13/16" X 0.065" 1" 1" 1" 1-1/2"

X 11/16" X 0.065" 1-1/2" 2"

LOOP DIVIDER 5/16" X 1-1/2" 5/16" 5/16"

PLATFORM, DRAPER - 218 PC1664

(08-NOV-83) PN=18

A20 FRAME, STRIPPERS, DIVIDERS, AND PLATES FEED PLATES HP744

KEY

1 2 3 4 5 6 7 8 9

-UN-01JAN94

PART NO.

H96281 H109212 03H1659 12H301 14H1040 24H1111 H96276 03H1765 12H304 14H812 24H1305 24H1305 03H1500 12H304 14H812 H96280 H109211 03H1540 N10213

PART NAME

PLATE PLATE BOLT LOCK WASHER NUT WASHER STRAP BOLT LOCK WASHER NUT WASHER WASHER BOLT LOCK WASHER NUT PLATE PLATE BOLT LOCK NUT

PLATFORM, DRAPER - 218 PC1664

(08-NOV-83)

QTY

1 1 2 2 2 2 1 2 2 2 14 12 12 12 12 1 1 4 4

SERIAL NO.

-483410 483411-

-483410 -483410 -483410 -483410 -483410 483411-

-483410 483411-

REMARKS

(L.H.) (L.H.) 1/2" X 1" 1/2" 1/2" 17/32" X 1-1/16" X 0.090" 3/8" X 3/4" 3/8" 3/8" 13/32" X 13/16" X 0.065" 13/32" X 13/16" X 0.065" 3/8" X 1" 3/8" 3/8" (R.H.) (R.H.) 5/16" X 3/4"

15-5

PN=19