John Deere CUTTING PLATFORM Parts Catalog Manual（PC1177）

A2 QUIK-TATCH COMBINE PLATFORMS

HP1456

-UN-01JAN94

JOHN DEERE CUTTING PLATFORM

(SPECIFICATIONS AND DESIGN SUBJECT TO CHANGE WITHOUT NOTICE)

DATE OF MANUFACTURE 1970 - 1975

QUIK-TATCH COMBINE PLATFORMS PC1177

(13-JUN-84)

5-1

PN=1

Thanks very much for your reading, Want to get more information, Please click here, Then get the complete manual

NOTE: If there is no response to click on the link above, please download the PDF document first, and then click on it.

Have any questions please write to me: admin@servicemanualperfect.com

A3 QUIK-TATCH COMBINE PLATFORMS

NOTE THE PARTS INFORMATION IN THIS PARTS CATALOG COVERS JOHN DEERE QUIK-TATCH PLATFORMS USED ON THE FOLLOWING JOHN DEERE SELF-PROPELLED COMBINES. FOR COMBINE PARTS INFORMATION, REFER TO THE APPROPRIATE JOHN DEERE COMBINE PARTS CATALOG LISTED BELOW.

MODEL NO.

PARTS CATALOG NO.

45 (EQUIPPED WITH FEEDER HOUSE FOR QUIK-TATCH PLATFORMS) . . . . . . . . . . . . . . . . . PC-652 55 (EQUIPPED WITH FEEDER HOUSE FOR QUIK-TATCH PLATFORMS) . . . . . . . . . . . . . . . . . PC-653 95 (EQUIPPED WITH FEEDER HOUSE FOR QUIK-TATCH PLATFORMS) . . . . . . . . . . . . . . . . . PC-656 105 (EQUIPPED WITH FEEDER HOUSE FOR QUIK-TATCH PLATFORMS) . . . . . . . . . . . . . . . . PC-746 3300 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PC-1163 4400 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PC-1164 6600 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PC-1166 7700 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PC-1167 FEEDER HOUSES FOR QUIK-TATCH CORN HEADS AND PLATFORMS . . . . . . . . . . . . . . . . . . PC-1195 THREE-ROLLER BELT PICKUPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PC-1189

IMPORTANT THIS PARTS CATALOG CONTAINS COMPLETE PARTS INFORMATION ON THE QUIK-TATCH CUTTING PLATFORM. VINTAGE IS DETERMINED BY SERIAL NUMBERS UNDER WHICH CUTTING PLATFORMS WERE MANUFACTURED. IT IS IMPORTANT THAT THE CORRECT SERIAL NUMBER BE USED WHEN ORDERING PARTS.

COPYRIGHT (C) 2000. DEERE & COMPANY. MOLINE, ILLNOIS ALL RIGHTS RESERVED

5-2

QUIK-TATCH COMBINE PLATFORMS PC1177

(29-FEB-00) PN=2

A4 QUIK-TATCH COMBINE PLATFORMS

SERIAL NUMBERS WHEN WRITING ABOUT OR FILLING OUT WARRANTY CLAIMS, USE ALL NUMBERS, LETTERS AND SPACES SHOWN ON THE SERIAL NUMBER PLATE.

SERIAL NUMBER PLATE 15DP000501 15DP - DESIGNATES PLATFORM SERIAL NUMBER PREFIX 000501 - DESIGNATES PLATFORM SERIAL NUMBER THE JOHN DEERE QUIK-TATCH PLATFORM SERIAL NUMBER PLATE IS LOCATED ON THE OUTSIDE OF THE RIGHT-HAND PLATFORM END SHEET.

QUIK-TATCH COMBINE PLATFORMS PC1177

(07-NOV-86)

5-3

PN=3

A5 QUIK-TATCH COMBINE PLATFORMS

SERIAL NUMBER LISTING INFORMATION

SERIAL NUMBER INFORMATION IS LISTED TO SHOW ON WHICH MACHINES EACH PART CAN BE USED; FOR EXAMPLE: THE PART CAN BE USED ON ALL MACHINES. 000000THE PART CAN BE USED ON ALL MACHINES BEGINNING WITH THE SERIAL NUMBER LISTED. -000000 THE PART CAN BE USED ON ALL MACHINES UP TO AND INCLUDING THE SERIAL NUMBER LISTED. 000000-000000 THE PART CAN BE USED ON ALL MACHINES BETWEEN AND INCLUDING THE SERIAL NUMBERS LISTED. WHEN XXXXXX’S ARE LISTED IN PLACE OF A SERIAL NUMBER, A SERIAL NUMBER CHANGE WAS MADE BUT THE EXACT SERIAL NUMBER WAS NOT AVAILABLE WHEN THE CATALOG WAS PRODUCED.

JDM REMANUFACTURED COMPONENTS THE SERVICE PARTS LISTED IN THIS CATALOG ARE INTENDED FOR THE REPAIR OF ORIGINAL EQUIPMENT COMPONENTS. ALTHOUGH MOST SERVICE PARTS MAY BE USED TO REPAIR REMANUFACTURED COMPONENTS, THE REMANUFACTURED DESIGN MAY CHANGE PARTS SUFFICIENTLY SO THAT SERVICE PARTS ARE INADEQUATE OR NOT USABLE.

BOLT AND CAP SCREW STRENGTH IDENTIFICATION BOLTS AND CAP SCREWS REQUIRED TO HAVE HIGH-STRENGTH QUALITIES EQUIVALENT TO SAE GRADE 8 ARE IDENTIFIED THROUGHOUT THIS CATALOG BY THE DESCRIPTION HS SAE 8. ALL STANDARD BOLTS AND CAP SCREWS ARE SAE GRADE 5 OR LOWER.

COMPLETE GOODS LISTINGS COMPLETE GOODS ARE LISTED IN BOLD FACE TYPE. ORDER SEPARATELY. DO NOT INCLUDE ON REPLACEMENT PARTS ORDER.

SI UNITS OF MEASURE METRIC DIMENSIONS ARE GIVEN, WHERE APPLICABLE, THROUGHOUT THIS PARTS CATALOG.

TRADEMARKS THROUGHOUT THIS PARTS CATALOG, YOU WILL FIND THE FOLLOWING DEERE & COMPANY TRADEMARKS: QUIK-TATCH™

CHANGE INDICATOR LINE (MICROFICHE CATALOGS ONLY) CHANGES AFFECTING THE ORDERING OF PARTS ARE IDENTIFIED BY VERTICAL LINES MARKED IN THE LEFTHAND MARGIN OF REVISED PARTS LISTING IMAGES. A LINE IS ALSO AT THE LEFT-HAND EDGE OF THE SAME PART NUMBER IN THE NUMERICAL INDEX TO SHOW THE LOCATION OF REVISED INFORMATION.

5-4

QUIK-TATCH COMBINE PLATFORMS PC1177

(07-NOV-86) PN=4

A6 QUIK-TATCH COMBINE PLATFORMS

SECTIONAL INDEX SECTION GENERAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 05 REEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 FRAME, SHEETS, PLATES, DIVIDERS, GUARDS, KNIVES, PITMAN, COUPLER, DRIVE SHAFTS AND SHIELDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 DRAPERS, ROLLS, SUPPORTS AND SHIELDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 IDLERS AND TIGHTENERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 BELTS, CHAINS, SHEAVES AND SPROCKETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 NUMERICAL INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

QUIK-TATCH COMBINE PLATFORMS PC1177

(27-OCT-81)

5-5

PN=5

QUIK-TATCH COMBINE PLATFORMS

MEMORANDA

5-6

QUIK-TATCH COMBINE PLATFORMS PC1177

(27-OCT-81) PN=6

A7 QUIK-TATCH COMBINE PLATFORMS ALPHABETICAL INDEX GRID

PAGE

A B5 B8 B13 B15 B16 B17 B18 B3 C12 C15 D24 C16 C18 D24 D23 D23 D24 C14 C14

ARM, PICKUP REEL ........................................................

ARM, PICKUP REEL ........................................................

ARM, PICKUP REEL ........................................................

ARM, PICKUP REEL ........................................................

ARM, REEL SUPPORT ....................................................

ARM, REEL SUPPORT ....................................................

ARM, REEL SUPPORT ....................................................

ARM, SLAT REEL ............................................................

AUGER ..............................................................................

AUGER ..............................................................................

AUGER AND KNIFE DR. TIGHTENER AND SHIELD ....

AUGER AND KNIFE DRIVE SHAFT................................

AUGER AND KNIFE DRIVE SHAFT................................

AUGER AND KNIFE DRIVE SHIELD ..............................

AUGER DRIVE SHIELD ..................................................

AUGER DRIVE TIGHTENER AND SHIELD ....................

AUGER DRIVE TIGHTENER AND SHIELD ....................

AUGER FLIGHT EXTENSIONS ......................................

AUGER SPRK’T, SLIP CLUTCH AND BRG. HSG. ........

10 - 4 10 - 7 10 - 12 10 - 14 10 - 15 10 - 16 10 - 17 10 - 2 15 - 16 15 - 19 30 - 4 15 - 20 15 - 22 30 - 4 30 - 3 30 - 3 30 - 4 15 - 18 15 - 18

B B24 B5 B7 B8 B5 B7 B8 B22 B23 D21 B19 D21 D21 D21 E2 C14

BALLAST PLATES ............................................................

BAT ....................................................................................

BAT ....................................................................................

BAT ....................................................................................

BATSHAFT, PICKUP REEL..............................................

BATSHAFT, PICKUP REEL..............................................

BATSHAFT, PICKUP REEL..............................................

BEAM, TOP ......................................................................

BEAM, TOP ......................................................................

BELT PICKUP AND REEL ..............................................

BELT PICKUP DRIVE SHEAVE AND SPROCKETS ......

BELT PICKUP LOWER DRIVE SHIELD..........................

BELT PICKUP LOWER DRIVE TIGHTENER ..................

BELT PICKUP SHIELD AND DRIVE TIGHTENER ........

BELTS AND CHAINS ON LEFT-HAND SIDE ................

BRG. HSG., AUGER SPRK’T, AND SLIP CLUTCH ......

15 - 3 10 - 4 10 - 6 10 - 7 10 - 4 10 - 6 10 - 7 15 - 1 15 - 2 30 - 1 10 - 18 30 - 1 30 - 1 30 - 1 35 - 1 15 - 18

CENTERSHAFT, PICKUP REEL......................................

CENTERSHAFT, PICKUP REEL......................................

CHAINS AND BELTS ON LEFT-HAND SIDE ................

CONVEYOR TYPE............................................................

COUPLER, QUIK-TATCH ................................................

COUPLER, SHIELD FOR RIGHT-HAND ........................

CUTTERBAR (SEE GUARDS AND KNIVES)..................

CYLINDERS, HYDRAULIC, LIFT REEL MASTER ..........

CYLINDERS, HYDRAULIC, LIFT REEL SLAVE..............

10 - 8 10 - 11 35 - 1 15 - 26 15 - 27 15 - 21 15 - 12 25 - 2 25 - 1

D C3 C4 C5 C6 C7 D24 D24 D2 D3

DIVIDER EXTENSIONS....................................................

DIVIDERS ..........................................................................

DIVIDERS ..........................................................................

DIVIDERS ..........................................................................

DIVIDERS ..........................................................................

DRAPER DRIVE SHIELD ................................................

DRAPER DRIVE TIGHTENER AND SHIELD ..................

DRAPER PARTS ..............................................................

DRAPER PARTS ..............................................................

QUIK-TATCH COMBINE PLATFORMS PC1177

(31-MAY-00)

15 - 7 15 - 8 15 - 9 15 - 10 15 - 11 30 - 4 30 - 4 20 - 1 20 - 2

DRAPER PARTS ..............................................................

DRAPER PARTS ..............................................................

DRAPERS..........................................................................

DRIVE CHAINS AND SHEAVES ON R.H. SIDE ............

DRIVE ROLLS, DRAPER ................................................

DRIVE SHAFT, HEADER (SH) ........................................

DRIVE SHAFT,HEADER-SH-CONVEYOR TYPE ............

DRIVE TIGHT’R, LOWER REEL AND BELT PKUP. ......

DRIVE TIGHTENERS ......................................................

DRIVE TIGHTENERS ......................................................

DRIVE TIGHTENERS ......................................................

DRIVE TIGHTENERS ......................................................

DRIVES..............................................................................

DRIVES..............................................................................

DRIVES..............................................................................

PAGE 20 - 3 20 - 4 20 - 4 35 - 3 20 - 2 15 - 25 15 - 26 30 - 1 30 - 1 30 - 2 30 - 3 30 - 4 35 - 1 35 - 2 35 - 3

E C4 C5 C6 C7 C3 C14

END SHEET ......................................................................

END SHEET ......................................................................

END SHEET ......................................................................

END SHEET ......................................................................

EXTENSION DIVIDERS....................................................

EXTENSIONS, FLIGHT ....................................................

15 - 8 15 - 9 15 - 10 15 - 11 15 - 7 15 - 18

F C21 C12 B5 B8 B13 B14 B15 B22 B23

FEEDER HOUSE, PADDLE TYPE ..................................

FINGERS, AUGER............................................................

FINGERS, PICKUP REEL ................................................

FINGERS, PICKUP REEL ................................................

FINGERS, PICKUP REEL ................................................

FINGERS, PICKUP REEL ................................................

FINGERS, PICKUP REEL ................................................

FRAME ..............................................................................

FRAME ..............................................................................

15 - 25 15 - 16 10 - 4 10 - 7 10 - 12 10 - 13 10 - 14 15 - 1 15 - 2

G C10 C8 C10

C B9 B12 E2 C22 C23 C17 C8 D8 D7

GRID D4 D5 D5 E4 D3 C21 C22 D21 D21 D22 D23 D24 E2 E3 E4

GUARD AND KNIFE REPAIR BLOCK ............................

GUARDS............................................................................

GUARDS............................................................................

15 - 14 15 - 12 15 - 14

H C8 C21 C22 D16 D17 D8 D7 D7 D8 D9 D10 D11 D14 D11 D14 D16 D17 D15

HEAD, KNIFE ....................................................................

HEADER DRIVE SHAFT (SH)..........................................

HEADER DRIVE SHAFT-SH-CONVEYOR TYPE............

HYD. MOTOR, HYDROSTATIC DRIVE REEL ................

HYD. MOTOR, HYDROSTATIC DRIVE REEL ................

HYDRAULIC CYLS., LIFT REEL MASTER ....................

HYDRAULIC CYLS., LIFT REEL SLAVE ........................

HYDRAULIC LIFT REEL PARTS ....................................

HYDRAULIC LIFT REEL PARTS ....................................

HYDRAULIC LIFT REEL PARTS ....................................

HYDRAULIC LIFT REEL PARTS ....................................

HYDROSTATIC DR. REEL MOTOR SUPT. SHIELD......

HYDROSTATIC DR. REEL MOTOR SUPT. SHIELD......

HYDROSTATIC DR. REEL MTR. SUPPORT SHIELD ..

HYDROSTATIC DR. REEL MTR. SUPPORT SHIELD ..

HYDROSTATIC DRIVE REEL HYD. MOTOR ................

HYDROSTATIC DRIVE REEL HYD. MOTOR ................

HYDROSTATIC DRIVE REEL MOTOR SHIELD ............

15 - 12 15 - 25 15 - 26 25 - 11 25 - 12 25 - 2 25 - 1 25 - 1 25 - 2 25 - 3 25 - 4 25 - 5 25 - 8 25 - 5 25 - 8 25 - 11 25 - 12 25 - 9

5-7

PN=7

A8 QUIK-TATCH COMBINE PLATFORMS ALPHABETICAL INDEX - CONTINUED GRID D15 HYDROSTATIC DRIVE REEL MOTOR SPROCKET ......

D15 HYDROSTATIC DRIVE REEL MOTOR SUPPORT ........

D18 HYDROSTATIC DRIVE REEL OIL LINES ......................

D19 HYDROSTATIC DRIVE REEL OIL LINES ......................

D11 HYDROSTATIC DRIVE REEL PARTS ............................

D12 HYDROSTATIC DRIVE REEL PARTS ............................

D13 HYDROSTATIC DRIVE REEL PARTS ............................

D14 HYDROSTATIC DRIVE REEL PARTS ............................

D16 HYDROSTATIC DRIVE REEL PARTS ............................

D17 HYDROSTATIC DRIVE REEL PARTS ............................

D18 HYDROSTATIC DRIVE REEL PARTS ............................

D19 HYDROSTATIC DRIVE REEL PARTS ............................

PAGE 25 - 9 25 - 9 25 - 13 25 - 14 25 - 5 25 - 6 25 - 7 25 - 8 25 - 11 25 - 12 25 - 13 25 - 14

I D2

IDLER ROLLS AND SUPPORTS, DRAPER....................

GRID B8 PICKUP REEL ..................................................................

B9 PICKUP REEL ..................................................................

B11 PICKUP REEL ..................................................................

B12 PICKUP REEL ..................................................................

B13 PICKUP REEL ..................................................................

B14 PICKUP REEL ..................................................................

B15 PICKUP REEL ..................................................................

B9 PICKUP REEL CENTERSHAFT ......................................

B12 PICKUP REEL CENTERSHAFT ......................................

B5 PICKUP REEL, ARM ........................................................

B8 PICKUP REEL, ARM ........................................................

B13 PICKUP REEL, ARM ........................................................

B15 PICKUP REEL, ARM ........................................................

C11 PITMAN, KNIFE DRIVE ....................................................

B24 PLATES, BALLAST ..........................................................

C2 PROTECTIVE WEAR PLATES ........................................

PAGE 10 - 7 10 - 8 10 - 10 10 - 11 10 - 12 10 - 13 10 - 14 10 - 8 10 - 11 10 - 4 10 - 7 10 - 12 10 - 14 15 - 15 15 - 3 15 - 6

20 - 1

Q J C23 B22 B23

J-ANGLES ........................................................................

J-ANGLES ........................................................................

QUIK-TATCH COUPLER ..................................................

15 - 27

15 - 1 15 - 2

R K C16 C18 C20 D24 C10 C11 C8

KNIFE AND AUGER DRIVE SHAFT................................

KNIFE AND AUGER DRIVE SHAFT................................

KNIFE AND AUGER DRIVE SHAFT (SH) ......................

KNIFE AND AUGER DRIVE TIGHTENER AND SHIELD..........................................................................

KNIFE AND GUARD REPAIR BLOCK ............................

KNIFE DRIVE PITMAN ....................................................

KNIVES AND GUARDS ....................................................

15 - 20 15 - 22 15 - 24 30 - 4 15 - 14 15 - 15 15 - 12

L C10 D9 D10 D18 D19 D21

LIFTING GUARDS ............................................................

LINES, OIL, HYDRAULIC LIFT REEL..............................

LINES, OIL, HYDRAULIC LIFT REEL..............................

LINES, OIL, HYDROSTATIC DRIVE REEL ....................

LINES, OIL, HYDROSTATIC DRIVE REEL ....................

LOWER REEL SHIELD AND DRIVE TIGHTENER ........

15 - 14 25 - 3 25 - 4 25 - 13 25 - 14 30 - 1

B19 B3 B9 B11 B12 B3 B3 B16 B17 B18 D22 D21 B15 B3 B2 B11 D2 D3

REEL DRIVE SHEAVE AND SPROCKETS ....................

REEL DRIVE SHIELD ......................................................

REEL DRIVE SHIELD ......................................................

REEL DRIVE SHIELD ......................................................

REEL DRIVE SHIELD ......................................................

REEL END SHIELD ..........................................................

REEL SLAT ......................................................................

REEL SUPPORT ARMS ..................................................

REEL SUPPORT ARMS ..................................................

REEL SUPPORT ARMS ..................................................

REEL UPPER DRIVE TIGHTENER ................................

REEL, LOWER DRIVE TIGHTENER AND SHIELD ........

REEL, PICKUP..................................................................

REEL, SHAFT ..................................................................

RODS, TRUSS, REEL ......................................................

RODS, TRUSS, REEL ......................................................

ROLLERS, DRAPERS ......................................................

ROLLERS, DRAPERS ......................................................

10 - 18 10 - 2 10 - 8 10 - 10 10 - 11 10 - 2 10 - 2 10 - 15 10 - 16 10 - 17 30 - 2 30 - 1 10 - 14 10 - 2 10 - 1 10 - 10 20 - 1 20 - 2

S M D8 D16 D17

MASTER CYLINDER, HYDRAULIC LIFT REEL..............

MOTOR, HYDRAULIC HYDROSTATIC DRIVE REEL ....

MOTOR, HYDRAULIC HYDROSTATIC DRIVE REEL ....

25 - 2 25 - 11 25 - 12

O D9 D10 D18 D19

OIL OIL OIL OIL

LINES, LINES, LINES, LINES,

HYDRAULIC LIFT REEL ..............................

HYDRAULIC LIFT REEL ..............................

HYDROSTATIC DRIVE REEL ......................

HYDROSTATIC DRIVE REEL ......................

25 - 3 25 - 4 25 - 13 25 - 14

P C21 B5 B7

5-8

PADDLE TYPE FEEDER HOUSE....................................

PICKUP REEL ..................................................................

PICKUP REEL ..................................................................

15 - 25 10 - 4 10 - 6

C8 B9 B11 B12 C20 B3 C22 B19 B19 E3 C4 C5 C6 C7 B25 C1 C17 D24 D23 D21

SECTIONS, KNIFE............................................................

SHAFT, DRIVE, PICKUP REEL ......................................

SHAFT, DRIVE, PICKUP REEL ......................................

SHAFT, DRIVE, PICKUP REEL ......................................

SHAFT, KNIFE AND AUGER DRIVE (SH)......................

SHAFT, SLAT REEL ........................................................

SHAFT,HEADER DRIVE-SH-CONVEYOR TYPE ............

SHEAVE AND SPROCKETS, BELT PICKUP..................

SHEAVE AND SPROCKETS, REEL DRIVE....................

SHEAVES ON LEFT-HAND SIDE....................................

SHEET, END ....................................................................

SHEET, END ....................................................................

SHEET, END ....................................................................

SHEET, END ....................................................................

SHEET, REAR AND BOTTOM ........................................

SHEET, REAR AND BOTTOM ........................................

SHIELD FOR RIGHT-HAND COUPLER ..........................

SHIELD, AUGER AND KNIFE DRIVE ............................

SHIELD, AUGER DRIVE ..................................................

SHIELD, BELT PICKUP LOWER DRIVE ........................

QUIK-TATCH COMBINE PLATFORMS PC1177

15 - 12 10 - 8 10 - 10 10 - 11 15 - 24 10 - 2 15 - 26 10 - 18 10 - 18 35 - 2 15 - 8 15 - 9 15 - 10 15 - 11 15 - 4 15 - 5 15 - 21 30 - 4 30 - 3 30 - 1 (31-MAY-00) PN=8

A9 QUIK-TATCH COMBINE PLATFORMS ALPHABETICAL INDEX - CONTINUED GRID D24 D11 D14 D15 D21 B3 B9 B11 B12 D4 C22 B22 B23 C4 C5 B2 D5 B3 D7 C14 D11 D14 D15 E3 E4 B25 C1 B16 B17 B18 D15 B22 B23 D2 D4

SHIELD, DRAPER DRIVE ................................................

SHIELD, HYDROSTATIC DR. REEL MTR. SUPT’S ......

SHIELD, HYDROSTATIC DR. REEL MTR. SUPT’S ......

SHIELD, HYDROSTATIC DRIVE REEL MOTOR............

SHIELD, LOWER REEL AND BELT PICKUP ................

SHIELD, REEL DRIVE......................................................

SHIELD, REEL DRIVE......................................................

SHIELD, REEL DRIVE......................................................

SHIELD, REEL DRIVE......................................................

SHIELDS AND SUPPORTS, DRAPER ............................

SIDEHILL-HEADER DRIVE SHAFT-CONV.TYPE ..........

SILL, MAIN ........................................................................

SILL, MAIN ........................................................................

SKID, PLATE ....................................................................

SKID, PLATE ....................................................................

SLAT REEL TRUSS RODS..............................................

SLAT, DRAPER ................................................................

SLAT, REEL ......................................................................

SLAVE CYLINDER, HYDRAULIC LIFT REEL ................

SLIP CLUTCH, AUGER SPRK’T, AND BRG. HSG. ......

SPRKT’S HYDROSTATIC DR. REEL MTR. SUPT’S......

SPRKT’S HYDROSTATIC DR. REEL MTR. SUPT’S......

SPROCKET, HYDROSTATIC DRIVE REEL MOTOR ....

SPROCKETS AND TIGHTENERS ON L.H. SIDE ..........

SPROCKETS AND TIGHTENERS ON R.H. SIDE ..........

STRIPPER ........................................................................

STRIPPER ........................................................................

SUPPORT ARMS, REEL ..................................................

SUPPORT ARMS, REEL ..................................................

SUPPORT ARMS, REEL ..................................................

SUPPORT, HYDROSTATIC DRIVE REEL MOTOR ......

SUPPORT, J-ANGLES......................................................

SUPPORT, J-ANGLES......................................................

SUPPORTS AND IDLER ROLLS, DRAPER....................

SUPPORTS AND SHIELDS, DRAPER ............................

PAGE 30 - 4 25 - 5 25 - 8 25 - 9 30 - 1 10 - 2 10 - 8 10 - 10 10 - 11 20 - 3 15 - 26 15 - 1 15 - 2 15 - 8 15 - 9 10 - 1 20 - 4 10 - 2 25 - 1 15 - 18 25 - 5 25 - 8 25 - 9 35 - 2 35 - 3 15 - 4 15 - 5 10 - 15 10 - 16 10 - 17 25 - 9 15 - 1 15 - 2 20 - 1 20 - 3

GRID

PAGE

T D21 E3 E4 E4 B2 B11

TIGHTENER, BELT PICKUP LOWER DRIVE ................

TIGHTENERS AND SPROCKETS ON L.H. SIDE ..........

TIGHTENERS AND SPROCKETS ON R.H. SIDE ..........

TIGHTENERS ON R.H. SIDE ..........................................

TRUSS ROD, REEL..........................................................

TRUSS ROD, REEL..........................................................

30 - 1 35 - 2 35 - 3 35 - 3 10 - 1 10 - 10

W C2

WEAR PLATES, PROTECTIVE........................................

QUIK-TATCH COMBINE PLATFORMS PC1177

(31-MAY-00)

15 - 6

5-9

PN=9

PLATFORMS, QUIK-TATCH, COMBINE MEMORANDA

5-10

QUIK-TATCH COMBINE PLATFORMS PC1177

(27-OCT-81) PN=10

B2 REEL SLAT REEL TRUSS RODS (USED WITH 20-, 22-, AND 24-FOOT PLATFORMS) HP937

KEY

1 2 3 4 5 6

-UN-01JAN94

PART NO.

BP12233 24H1311 H28031 H79255 H79257 H79252 19H1813 14H785 H28030

PART NAME

QTY

LOCK NUT WASHER WASHER STUD STUD STUD CAP SCREW NUT STRAP

QUIK-TATCH COMBINE PLATFORMS PC1177

10 10 10 5 5 5 AR AR AR

(27-OCT-81)

SERIAL NO.

REMARKS

13/32" X 1-1/4" X 0.220" (20’ PLATFORM) (22’ PLATFORM) (24’ PLATFORM) 5/16" X 5/8" 5/16" (20’, 5 USED; 22’ AND 24’, 10 USED)

10-1

PN=11

B3 REEL SLAT REEL HP938

KEY

1A

1B 2A 2B 3A 3B 4 5 6 7 8 9 10

11 12 13

14 15

10-2

-UN-01JAN94

PART NO.

10H1027 14H812 19H1905 14H785 16H1101 H11440 H76702 AH83869 H79543 AH83871 H79545 AP15561 19H1813 24H1136 P33729 24H1669 19H2106 14H813 19H2227 14H813 14H849 19H3242 14H813 11H222 H60710 H83838 AH77185 AH75951 AH77188 AH77184 AH77189 AH77190 AH77186 AH77187 AH77183 H79544 H76944

PART NAME

BOLT NUT CAP SCREW NUT RIVET HUB HUB HUB CHAIN SPROCKET CHAIN SPROCKET SHIELD SHEAVE CAP SCREW WASHER WASHER WASHER CAP SCREW NUT CAP SCREW NUT NUT SCREW NUT COTTER PIN SHIELD SHIELD SHAFT SHAFT SHAFT SHAFT SHAFT SHAFT SHAFT SHAFT SHAFT SHIELD ARM

QTY

SERIAL NO.

4 4 6 6 6 1 1 1 1 1 5 1 2 1 4 4 1 4 1 1 1 2 4 4 1 1 1 1 1 1 1 1 1 1 1 5 AR

-20000 -20000 -20000 -20000 20001-20000 -20000 20001-20000 20001-

-20000 -20000 -20000 -20000 -20000 2000120001-20000

REMARKS

3/8" X 1-1/4", (HYDROSTATIC DRIVE REEL) 3/8" 5/16" X 1", (BELT DRIVE REEL) 5/16" 5/16" X 7/8", (BELT DRIVE REEL) (BELT DRIVE REEL) (HYDROSTATIC DRIVE REEL) (BELT DRIVE REEL) 81 TEETH (HYDROSTATIC DRIVE REEL) 81 TEETH (HYDROSTATIC DRIVE REEL) REEL END, R.H. 508 MM (20") DIA. (BELT DRIVE REEL) 5/16" X 5/8" 11/32" X 11/16" X 0.065" 1-25/64" X 2-1/8" X 0.075" 7/16" X 2-3/4", (HYDROSTATIC DRIVE REEL) 7/16" 7/16" X 2-1/2", (BELT DRIVE REEL) 7/16" 7/16" 7/16" X 2-3/4" 7/16" 3/16" X 2" (SUB H83838) (10’ PLATFORM) (NO LONGER AVAILABLE) (13’ PLATFORM) (14’ PLATFORM) (NO LONGER AVAILABLE) (15’ PLATFORM) (NO LONGER AVAILABLE) (16’ PLATFORM) (NO LONGER AVAILABLE) (18’ PLATFORM) (NO LONGER AVAILABLE) (20’ PLATFORM) (22’ PLATFORM) (24’ PLATFORM) (NO LONGER AVAILABLE) REEL END, L.H. (10’ PLATFORM,15 USED; 13’, 14’, AND 15’ PLATFORM, 20 USED; 16’, 18’, AND 20’ PLATFORM, 25 USED; 22’ AND 24’ PLATFORM, 30 USED)

THIS PARTS LISTING IS CONTINUED QUIK-TATCH COMBINE PLATFORMS PC1177

(12-SEP-90) PN=12

B4 REEL SLAT REEL-CONTINUED KEY

16 17 18

PART NO.

19H1936 14H812 03H1527 21H1024 14H786 H25385 H24049 H22818 H62942 H22819 H22820 H28027 H104020 E60573 E60574 H79259 E60575 H79260 H79261 H79262 H104022

PART NAME

QTY

CAP SCREW NUT BOLT SCREW NUT SLAT SLAT SLAT SLAT SLAT SLAT SLAT SLAT SLAT SLAT SLAT SLAT SLAT SLAT SLAT SLAT

QUIK-TATCH COMBINE PLATFORMS PC1177

AR AR AR AR AR 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 1

(12-SEP-90)

SERIAL NO.

REMARKS

-183900

3/8" 3/8" 1/4" 1/4" 1/4" (10’ (13’ (14’ (15’ (16’ (18’ (20’ (13’ (15’ (16’ (18’

-183900

(SUB E60576) (20’ PLATFORM)(METAL) (22’ PLATFORM)(METAL) (24’ PLATFORM)(METAL) (SUB H104022)

-183900 -183900 -183900 -183900 -183900 -183900 -183900

X 3/4" X 1-1/4", (USED WITH WOODEN SLATS) X 5/8", (USED WITH METAL SLATS) PLATFORM)(WOOD) (NO LONGER AVAILABLE) PLATFORM)(WOOD) PLATFORM)(WOOD) PLATFORM)(WOOD) (NO LONGER AVAILABLE) PLATFORM)(WOOD) PLATFORM)(WOOD) PLATFORM)(WOOD) PLATFORM)(METAL) (SUB FOR H95226) PLATFORM)(METAL) (SUB FOR H95227) PLATFORM)(METAL) (SUB FOR H79258) PLATFORM)(METAL) (SUB E60575)

10-3

PN=13

B5 REEL PICKUP REEL (CUTTING PLATFORM) HP944

KEY

1

-UN-01JAN94

PART NO.

PART NAME

QTY

H64719

DISK

AR

H84031

PLATE

AR

3

H84031 H88454 H98689 H82719 H84029 H88780 19H2020 14H785 AE24410

PLATE PLATE PLATE PLATE PLATE PLATE CAP SCREW NUT ARM

4 4 4 4 4 4 AR AR AR

4

AH81252 E40206

ARM BASE

16 AR

5

E40205

CAP

AR

6

E40202 E45229 E40203

LOCK NUT LOCK NUT U-BOLT

AR AR AR

AH79623 AH79624 AH19666 AH19680 AH19671 AH19684 AH63035 AH63039 AH97183 AH19687 AH19695 AH19698 AH97185 AH63604 AH80100 AH97187 AH81254 AH97188

SHAFT SHAFT SHAFT SHAFT SHAFT SHAFT SHAFT SHAFT SHAFT SHAFT SHAFT SHAFT SHAFT SHAFT SHAFT SHAFT SHAFT SHAFT

2

7 8

10-4

6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 4 4

SERIAL NO.

-20000

-167900 -183900 -20000 -167900 167901-

-183900

-20000 -20000 -20000 -20000 -183900 -20000 -183900 -183900 -183900

REMARKS

(10’, 3 USED; 13’, 14’, 15’, 16’, 18’, 20’, AND 22’, 4 USED) (SUB H84031) (10’, 3 USED; 13’, 14’, 15’, 16’, 18’, AND 20’, 4 USED) 22’ PLATFORM 22’ PLATFORM, (SUB H98689) 24’ PLATFORM, (SUB H84029) 24’ PLATFORM, (NO LONGER AVAILABLE) 24’ PLATFORM 5/16" X 1/2" 5/16" (10’, 18 USED; 13’, 14’, 15’, 16’, 18’, 20’, AND 22’, 24 USED) 24’ PLATFORM (10’, 18 USED, 13’, 14’, 15’, 16’, 18’, 20’, 22’ AND 24’, 24 USED) (10’, 18 USED; 13’, 14’, 15’, 16’, 18’, 20’, 22’ AND 24’, 24 USED) (SUB E45229) (10’, 18 USED; 13’, 14’, 15’, 16’, 18’, 20’, 22’, AND 24’, 24 USED) (10’ PLATFORM) (STANDARD REEL) (SUB AH79624) (10’ PLATFORM) (HEAVY-DUTY REEL) (13’ PLATFORM) (STANDARD REEL) (SUB AH19680) (13’ PLATFORM) (HEAVY-DUTY REEL) (14’ PLATFORM) (STANDARD REEL) (SUB AH19684) (14’ PLATFORM) (HEAVY-DUTY REEL) (15’ PLATFORM) (STANDARD REEL) (SUB AH63039) (15’ PLATFORM)(HEAVY-DUTY REEL) (SUB AH97183) (15’ PLATFORM)(HEAVY-DUTY REEL) (16’ PLATFORM) (STANDARD REEL) (SUB AH19695) (16’ PLATFORM)(HEAVY-DUTY REEL) (18’ PLATFORM)(HEAVY-DUTY REEL) (SUB AH97185) (18’ PLATFORM) (20’ PLATFORM)(HEAVY-DUTY REEL) (22’ PLATFORM)(HEAVY-DUTY REEL) (SUB AH97187) (22’ PLATFORM)(HEAVY-DUTY REEL) (24’ PLATFORM)(HEAVY-DUTY REEL) (SUB AH97188) (24’ PLATFORM)(HEAVY-DUTY REEL)

THIS PARTS LISTING IS CONTINUED QUIK-TATCH COMBINE PLATFORMS PC1177

(12-SEP-90) PN=14

B6 REEL PICKUP REEL (CUTTING PLATFORM)-CONTINUED KEY

9 10 11 12

13

PART NO.

PART NAME

QTY

SERIAL NO.

H33318 H33317 H33316 AH19638 AH79619 AH19667 AH19681

RIVET CLIP FINGER SLAT SLAT SLAT SLAT

AR AR AR 12 12 12 12

AH97190 AH19668 AH19682

SLAT SLAT SLAT

12 6 6

AH97191 AH19673 AH19685

SLAT SLAT SLAT

6 12 12

-20000

AH19667 AH19681

SLAT SLAT

6 6

-20000 -183900

AH97190 AH63034 AH63038 AH19688 AH19696 AH97194 AH19699

SLAT SLAT SLAT SLAT SLAT SLAT SLAT

6 18 18 18 18 18 12

AH19696

SLAT

6

-183900

AH97194 AH19699

SLAT SLAT

6 6

-183900

AH97195

SLAT

12

AH65216

SLAT

12

-183900

AH97196 AH80098

SLAT SLAT

12 18

-183900

AH97197 AH81256

SLAT SLAT

18 12

-183900

AH97200 03H1810 14H786

SLAT BOLT NUT

12 AR AR

QUIK-TATCH COMBINE PLATFORMS PC1177

(07-NOV-86)

-20000 -20000 -183900 -20000 -183900

-20000 -20000 -183900 -183900

REMARKS

(10’ PLATFORM) (STANDARD REEL) (SUB AH79619) (10’ PLATFORM) (HEAVY-DUTY REEL) (13’ PLATFORM) (STANDARD REEL) (SUB AH19681) R.H. AND L.H. (13’ PLATFORM) (HEAVY-DUTY REEL) (SUB AH97190) R.H. AND L.H. (13’ PLATFORM)(HEAVY DUTY REEL) (13’ PLATFORM) (STANDARD REEL) (SUB AH19682) CENTER (13’ PLATFORM) (HEAVY-DUTY REEL) (SUB AH97191) (13’ PLATFORM) (14’ PLATFORM) (STANDARD REEL) (SUB AH19685) R.H. AND L.H. (14’ PLATFORM) (HEAVY-DUTY REEL) (14’ PLATFORM) (STANDARD REEL) (SUB AH19681) CENTER (14’ PLATFORM) (HEAVY-DUTY REEL) (SUB AH97190) CENTER (14’ PLATFORM) (HEAVY DUTY REEL) (15’ PLATFORM) (STANDARD REEL) (SUB AH63038) (15’ PLATFORM) (HEAVY-DUTY REEL) (16’ PLATFORM) (STANDARD REEL) (SUB AH19696) (16’PLATFORM (HEAVY-DUTY REEL) (SUB AH97194) (16’ PLATFORM)(HEAVY-DUTY REEL) R.H. AND L.H. (18’ PLATFORM) (HEAVY-DUTY REEL) (SUB AH97195) CENTER (18’ PLATFORM) (HEAVY-DUTY REEL) (SUB AH97194) CENTER (18’ PLATFORM)(HEAVY-DUTY REEL) (20’ PLATFORM) (HEAVY-DUTY REEL) (SUB AH97195) R.H. AND L.H. (18’ AND 20’ PLATFORM) (HEAVY-DUTY REEL) (20’ PLATFORM) (HEAVY-DUTY REEL) (SUB AH97196) (20’ PLATFORM)(HEAVY-DUTY REEL) (22’ PLATFORM) (HEAVY-DUTY REEL) (SUB AH97197) (22’ PLATFORM) (HEAVY DUTY REEL) (24’ PLATFORM) (HEAVY-DUTY REEL) (SUB AH97200) (24’ PLATFORM) (HEAVY DUTY REEL) 1/4" X 1-1/2" 1/4"

10-5

PN=15

B7 REEL PICKUP REEL (DRAPER PLATFORM) HP945

KEY

1 2 3 4 5 6 7 8 9 10

11

10-6

-UN-01JAN94

PART NO.

PART NAME

QTY

H36260 03H1505 H28088 E50101 H36262 H33326 03H1627 P43893 AH19695 H33318 H33317 H33316 AH19696

BRACE BOLT LOCK NUT LOCK NUT ARM PLATE BOLT LOCK NUT SHAFT RIVET CLIP FINGER SLAT

24 24 24 24 24 8 48 48 6 234 234 234 18

AH97194 03H1527 P43893

SLAT BOLT LOCK NUT

18 144 144

SERIAL NO.

-183900

REMARKS

(NO LONGER AVAILABLE) 5/16" X 1-3/4" (SUB E50101) (NO LONGER AVAILABLE) (NO LONGER AVAILABLE) 1/4" X 1-1/2"

(213, -610440; 215, -610550; 216, -610875; 218, -611060; 220, -611400; 222, -611400; 224, -611675) (SUB AH97194) 1/4" X 1-1/4"

QUIK-TATCH COMBINE PLATFORMS PC1177

(12-SEP-90) PN=16

B8 REEL PICKUP REEL (DRAPER PLATFORM) HP946

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13

14 15 16 17

-UN-01JAN94

PART NO.

PART NAME

QTY

H83589 H95826 19H1849 19H2020 14H785 AE24410 E40206 E40205 E40202 E45229 E40203 AH19695 H33318 H33317 H33316 AH19696

PLATE PLATE CAP SCREW CAP SCREW NUT ARM BASE CAP LOCK NUT LOCK NUT U-BOLT SHAFT RIVET CLIP FINGER SLAT

4 4 24 48 48 24 24 24 48 48 24 6 234 234 234 18

AH97194 03H1810 14H786 19H1905 AH83690 AH94685 H95825

SLAT BOLT NUT CAP SCREW PLATE PLATE BRACE

18 144 144 24 4 4 24

QUIK-TATCH COMBINE PLATFORMS PC1177

(12-SEP-90)

SERIAL NO.

-183900

REMARKS

(NO LONGER AVAILABLE) 5/16" X 1-1/4" 5/16" X 1/2" 5/16"

-183900

(SUB E45229)

(213, -610440; 215, -610550; 216, -610875; 218, -611060; 220, -611400; 222, -611400; 224, -611675) (SUB AH97194)

-183900

1/4" X 1-1/2" 1/4" 5/16" X 1" (NO LONGER AVAILABLE)

10-7

PN=17

B9 REEL PICKUP REEL SHAFTS AND SHEAVES (CUTTING PLATFORM) HP947

KEY

1A

1B 2A 2B 3A 3B 4

5 6 7

8 9 10 11

10-8

-UN-01JAN94

PART NO.

PART NAME

QTY

19H1905 14H785 10H1027 14H812 16H1101 H11440 H76702 AH83869 H79543 AH83871 AH79622 AH65197 AH65198 AH65199 AH65200 AH65204 AH65203 AH80097

CAP SCREW NUT BOLT NUT RIVET HUB HUB HUB CHAIN SPROCKET CHAIN SPROCKET SHAFT SHAFT SHAFT SHAFT SHAFT SHAFT SHAFT SHAFT

6 6 4 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1

AH89659 AH81253

SHAFT SHAFT

1 1

AH89658 AH97168 19H1936 H20024 24H1122 AE24407

SHAFT SHAFT CAP SCREW LOCK NUT WASHER SHAFT

AE24407 AH89657 AH97216 03H1500 H20024 24H1553 22H1043 AH89655

SHAFT SHAFT SHAFT BOLT LOCK NUT WASHER SET SCREW LOCKING COLLAR

SERIAL NO.

-20000 -20000 -20000 -20000 20001-20000 20001-20000 20001-

-167900 -167900

1 1 AR AR AR 1

-183900

1 1 1 6 6 6 4 2

-167900 167901-183900

-183900 -167900

REMARKS

5/16" X 1", (BELT DRIVE REEL) 5/16" 3/8" X 1-1/4", (HYDROSTATIC DRIVE REEL) 3/8" 5/16" X 7/8", (BELT DRIVE REEL) (BELT DRIVE REEL) (HYDROSTATIC DRIVE REEL) (BELT DRIVE REEL) 81 TEETH (HYDROSTATIC DRIVE REEL) 81 TEETH (HYDROSTATIC DRIVE REEL) CENTER (10’ PLATFORM) (NO LONGER AVAILABLE) CENTER (13’ PLATFORM) CENTER (14’ PLATFORM) (NO LONGER AVAILABLE) CENTER (15’ PLATFORM) CENTER (16’ PLATFORM) CENTER (18’ PLATFORM) CENTER (20’ PLATFORM) (22’ PLATFORM) (SUB AH89659, (4) H88454, AH89825 AND AH89657) CENTER (22’ PLATFORM) (24’ PLATFORM) (SUB AH89658, (4) H88780, AH89825 AND AH89657) CENTER (24’ PLATFORM) (SUB AH97168) CENTER (24’ PLATFORM) 3/8" X 3/4" 3/8" X 7/8" X 0.083" DRIVEN (10’, 13’, 14’, 15’, 16’, 18’, AND 20’) DRIVEN (22’ AND 24’) (22’ AND 24’) (SUB AH97216) DRIVEN (20’, 22’ AND 24’) 3/8" X 1" 1-5/8" X 2-1/4" X 0.194" 3/8" X 1/4"

THIS PARTS LISTING IS CONTINUED QUIK-TATCH COMBINE PLATFORMS PC1177

(12-SEP-90) PN=18

B10 REEL PICKUP REEL SHAFTS AND SHEAVES (CUTTING PLATFORM) - CONTINUED KEY

12

13 14 15 16 17 18 19

PART NO.

AH65207 AH97212 AH65207 AH89825 AH97213 19H2106 19H3242 14H813 H64722 24H1136 19H1813 03H1495 14H812 H60710 H83838 AP15561

PART NAME

QTY

SHAFT SHAFT SHAFT SHAFT SHAFT CAP SCREW SCREW NUT PLATE WASHER CAP SCREW BOLT NUT SHIELD SHIELD SHEAVE

QUIK-TATCH COMBINE PLATFORMS PC1177

1 1 1 1 1 2 2 4 1 1 2 2 2 1 1 1

(07-NOV-86)

SERIAL NO.

-183900 -167900 167901-183900 -20000 20001-

-20000

REMARKS

(SUB AH97212) DRIVE (10’, 13’, 14’, 15’, 16’, 18’, AND 20’) DRIVE (22’ AND 24’) (22’ AND 24’) (SUB AH97213) DRIVE (22’ AND 24’) 7/16" X 2-3/4" 7/16" X 2-3/4" 7/16" 11/32" X 11/16" X 0.065" 5/16" X 5/8" 3/8" X 1-1/2" 3/8" (SUB H83838) 508 MM (20") DIA. (BELT DRIVE REEL)

10-9

PN=19