John Deere CTS II COMBINE WITH 900 SERIES PLATFORM Parts Catalog Manual（PC2752）

1A2 CTS II COMBINE H42552

-UN-10NOV94

JOHN DEERE CTS II COMBINE WITH 900 SERIES PLATFORM JOHN DEERE CTS II (1998-

)

(SPECIFICATIONS AND DESIGN SUBJECT TO CHANGE WITHOUT NOTICE)

CTS II COMBINE PC2752

(01-MAR-00)

10-1

PN=1

1A3 CTS II COMBINE

NOTE FOR 900 SERIES PLATFORM PARTS INFORMATION, REFER TO JOHN DEERE 900 SERIES PLATFORM PARTS CATALOG - PC-2104.

FOR 40 SERIES CORN HEAD PARTS INFORMATION, REFER TO JOHN DEERE 40 SERIES CORN HEAD PARTS CATALOG - PC-1223.

FOR 50A SERIES ROW-CROP HEAD PARTS INFORMATION, REFER TO JOHN DEERE 50A SERIES ROW-CROP HEAD PARTS CATALOG - PC-1747.

FOR THREE-ROLLER BELT PICKUP PARTS INFORMATION, REFER TO JOHN DEERE THREE-ROLLER BELT PICKUP PARTS CATALOG - PC-2210.

FOR 918 AND 920 DRAPER PARTS INFORMATION, REFER TO JOHN DEERE 918 AND 920 DRAPER PLATFORMS PARTS CATALOG - PC-2212.

FOR 90 SERIES CORN HEAD PARTS INFORMATION, REFER TO JOHN DEERE 90 SERIES CORN HEAD PARTS CATALOG - PC-2404.

IMPORTANT THIS PARTS CATALOG CONTAINS PARTS INFORMATION FOR THE CTS COMBINE. VINTAGE IS DETERMINED BY THE COMBINE SERIAL NUMBER OR THE PRODUCT INDENTIFICATION NUMBER (PIN).

IT IS IMPORTANT THAT THE CORRECT NUMBERS BE USED WHEN ORDERING PARTS.

10-2

CTS II COMBINE PC2752

(01-MAR-00) PN=2

1A4 CTS II COMBINE

PRODUCT INFORMATION NUMBER (PIN) PLATE THE PRODUCT IDENTIFICATION PLATE (PIN) IS LOCATED NEAR THE RIGHT HAND SIDE OF THE TOOL BOX.

AN EXAMPLE OF THE TWO-LINES ON THIS PIN PLATE IS: HO0CTSIIX675000 COMBINE (FIRST LINE) HO - MANUFACTURING UNIT (HARVESTER WORKS) 0CTSII - MODEL IDENTIFIER X - CONFIGURATION CODE/MODELIDENTIFIER SUFFIX 675000 - SEQUENTIAL NUMBER USED IN SERIAL NO. COLUMN (SECOND LINE) COMBINE - TYPE OF PRODUCT

COPYRIGHT (C) 2000. DEERE & COMPANY. MOLINE, ILLINOIS. ALL RIGHTS RESERVED.

CTS II COMBINE PC2752

(01-MAR-00)

10-3

PN=3

1A5 CTS II COMBINE

PARTS LISTING INFORMATION SERIAL NUMBER OR PRODUCT IDENTIFICATION NUMBER (PIN) INFORMATION SHOWS ON WHICH MACHINES PART MAY BE USED; FOR EXAMPLE: THE PART CAN BE USED ON ALL MACHINES. -000000 THE PART CAN BE USED ON ALL MACHINES UP TO AND INCLUDING THE SERIAL NUMBER LISTED. 000000THE PART CAN BE USED ON ALL MACHINES BEGINNING WITH THE SERIAL NUMBER LISTED. 000000-000000 THE PART CAN BE USED ON ALL MACHINES BETWEEN AND INCLUDING SERIAL NUMBERS LISTED. WHEN XXXXXX’S ARE LISTED IN PLACE OF A SERIAL NUMBER, A SERIAL NUMBER CHANGE WAS MADE, BUT THE EXACT SERIAL NUMBER IS NOT AVAILABLE WHEN THE CATALOG WAS PRINTED.

SHORT BLOCK SERIAL NUMBER PLATE ( RGP3513

-RGSB076882500)

-UN-01JAN94

THE REPLACEMENT SHORT BLOCK ASSEMBLY HAS A SERIAL NUMBER PLATE ATTACHED. THE ORIGINAL ENGINE SERIAL NUMBER MUST BE STAMPED ONTO THE NEW PLATE IN THE BLANK SPACE PROVIDED, AS A REFERENCE FOR YOUR DEALER. THE PLATE CAN BE ATTACHED WITH (2) 37H44 DRIVE SCREWS.

1.

2.

3.

4.

5.

DESIGNATES DESIGNATES DESIGNATES DESIGNATES DESIGNATES

10-4

ENGINE MANUFACTURER REPLACEMENT SHORT BLOCK LITERS THE PRODUCTION DATE COMPONENT SEQUENCE

RG - WATERLOO ENGINE WORKS SB XXX- 076 (7.6) 8825 00

CTS II COMBINE PC2752

(01-MAR-00) PN=4

Thanks very much for your reading, Want to get more information, Please click here, Then get the complete manual

NOTE: If there is no response to click on the link above, please download the PDF document first, and then click on it.

Have any questions please write to me: admin@servicemanualperfect.com

1A6 CTS II COMBINE

TWO LINE BAR CODED ENGINE SERIAL NUMBER PLATE RGP4941

-UN-25JUL97

FIRST LINE

DEFINES

RG - WATERLOO ENGINE WORKS

DESIGNATES ENGINE MANUFACTURER.

6

DESIGNATES NUMBER OF CYLINDERS.

081 (8.1 LITERS)

DESIGNATES LITER DISPLACEMENT.

H - AIR-TO-AIR

DESIGNATES TYPE OF AIR INTAKE SYSTEM.

H

DESIGNATES HARVESTER VEHICLE.

XXXXXX

DESIGNATES ENGINE SERIAL NUMBER.

SECOND LINE 6081HH003

CTS II COMBINE PC2752

APPLICATION CTSII

(01-MAR-00)

10-5

PN=5

1A7 CTS II COMBINE

SHORT BLOCK SERIAL NUMBER IDENTIFICATION RGP4574

-UN-02OCT95

SERIAL NUMBER STAMPED INTO CASTING OF BLOCK NEAR PREVIOUS SERIAL NUMBER PLATE. EXAMPLE: RE650490995 1. DESIGNATES SERVICE PART NUMBER 2. DESIGNATES MONTH ASSEMBLED 3. DESIGNATES YEAR ASSEMBLED

10-6

RE65049 09 95

CTS II COMBINE PC2752

(01-MAR-00) PN=6

1A8 CTS II COMBINE

DIRECTION ARROW ARROWS ARE USED WITH ILLUSTRATIONS TO INDICATE THE FRONT OF THE UNIT. "RIGHT-HAND" AND "LEFTHAND" SIDES ARE DETERMINED BY FACING IN THE DIRECTION OF MACHINE FORWARD TRAVEL.

BOX-ENCLOSED ILLUSTRATIONS A KEY NUMBER, SHOWN IN THE PARTS LIST, IS ASSIGNED TO A BOX ENCLOSING ALL PARTS SOLD AS A SERVICE ASSEMBLY. A BOX NOT KEYED INCLUDES NON-CURRENT PARTS.

KITS KIT INFORMATION WILL BE FOUND IMMEDIATELY FOLLOWING THE STORY IN WHICH IT IS USED.THE ILLUSTRATION IS REPEATED WITH ONLY THE KIT PARTS CALLED OUTAND WITH ALL OTH ER PARTS SHOWN IN PHANTOM.

JDM REMANUFACTURED COMPONENTS THE SERVICE PARTS LISTED IN THIS CATALOG ARE INTENDED FOR THE REPAIR OF ORIGINAL EQUIPMENT COMPONENTS. ALTHOUGH MOST SERVICE PARTS MAY BE USED TO REPAIR REMANUFACTURED COMPONENTS, THE REMANUFACTURED DESIGN MAY CHANGE PARTS SUFFICIENTLY SO THAT SERVICE PARTS ARE INADEQUATE OR NOT USABLE.

BOLT AND CAP SCREW STRENGTH IDENTIFICATION BOLTS AND CAP SCREWS REQUIRED TO HAVE HIGH-STRENGTH QUALITIES EQUIVALENT TO SAE GRADE 8 ARE IDENTIFIED THROUGHOUT THIS CATALOG BY THE DESCRIPTION HS SAE 8. ALL STANDARD BOLTS AND CAP SCREWS ARE SAE GRADE 5 OR LOWER. BOLTS AND CAP SCREWS REQUIRED TO HAVE HIGH-STRENGTH QUALITIES EQUIVALENT TO PROPERTY CLASS 10.9 ARE IDENTIFIED THROUGHOUT THIS CATALOG BY THE DESCRIPTION HS 10.9. ALL STANDARD BOLTS AND CAP SCREWS ARE PROPERTY CLASS. 8.8 OR LOWER.

SI UNITS OF MEASURE METRIC DIMENSIONS ARE GIVEN, WHERE APPLICABLE, THROUGHOUT THIS PARTS CATALOG.

CTS II COMBINE PC2752

(01-MAR-00)

10-7

PN=7

1A9 CTS II COMBINE

TRADEMARKS THROUGHOUT THIS PARTS CATALOG, YOU WILL FIND THE FOLLOWING DEERE & COMPANY TRADEMARKS: DIAL-A-SPEED™ DIAL-A-MATIC™ HARVESTRAK™

POSI-TORQ™ TORQ-GARD SUPREME® QUIK-TATCH™

CONTOUR MASTER™

CHANGE INDICATOR LINE CHANGES AFFECTING THE ORDERING OF PARTS ARE IDENTIFIED BY VERTICAL LINES MARKED IN THE LEFT-HAND MARGIN OF REVISED PARTS LISTING IMAGES. A LINE IS ALSO AT THE LEFT-HAND EDGE OF THE SAME PART NUMBER IN THE NUMERICAL INDEX TO SHOW THE LOCATION OF REVISED INFORMATION.

FUNCTION CODE

(EXAMPLE - FC: 5000)

FUNCTION CODES ARE LOCATED ON EACH PAGE IN THE UPPER RIGHT-HAND CORNER IN THE BOX. THE CODE LISTED IS A GROUPING CODE THAT CAN BE USED FOR WARRANTIES AND FOR DTAC TO IDENTIFY CERTAIN AREAS.

COMPLETE GOODS LISTINGS COMPLETE GOODS ARE IN BOLD FACE TYPE. ORDER SEPARATELY. DO NOT INCLUDE ON REPLACEMENT PARTS ORDER.

FOR INDIVIDUAL HEADER PARTS CATALOGS REFER TO: PC-2104 - PARTS CATALOG FOR JOHN DEERE 900 SERIES PLATFORMS PC-2210 - PARTS CATALOG FOR JOHN DEERE THREE ROLLER BELT PICK-UP PC-2212 - PARTS CATALOG FOR JOHN DEERE 918 DRAPER PLATFORMS PC-1747 - PARTS CATALOG FOR JOHN DEERE 50A SERIES ROW-CROP HEADS PC-1223 - PARTS CATALOG FOR JOHN DEERE 40 SERIES CORN HEADS PC2404 - PARTS CATALOG FOR JOHN DEERE 90 SERIES CORN HEADS

10-8

CTS II COMBINE PC2752

(01-MAR-00) PN=8

1A10 CTS II COMBINE SECTION INDEX

SECTION 10 - GENERAL INFORMATION SECTION 20 - ENGINE FAN, INTERCOOLER AND SCREENS SECTION 24 - ENGINE SECTION 30 - FUEL AND AIR SECTION 40 - ELECTRICAL SECTION 50 - POWER TRAIN SECTION 60 - STEERING AND BRAKES SECTION 70 - HYDRAULICS SECTION 80 - SEPARATOR SHELL SECTION 90 - OPERATOR’S STATION SECTION 110 - FEEDER HOUSE SECTION 120 - THRESHING AND SEPARATION SECTION 121 - DRIVES SECTION 125 - RESIDUE DISPOSAL SECTION 130 - CLEAN GRAIN ELEVATOR, GRAIN TANK AND UNLOADING AUGER SECTION 160 - DIAL-A-MATIC HEADER HEIGHT CONTROL SECTION 170 - DECALS, BELTS AND CHAINS SECTION 180 - NUMERICAL INDEX

CTS II COMBINE PC2752

(01-MAR-00)

10-9

PN=9

1A11 CTS II COMBINE ALPHABETICAL INDEX GRID

PAGE

A 3G20 3G19 3G18 3G20 3G18 3G22 3G18 2J13 1B21 1E15 3C7 3B21 3C22 3C20 2I4 2I2 2G14 1D5 1D4 1H1 1H3 1C24 3F9 2F21 2G5 3F11 4G11 1I7 1I4 4J1 1F1 1G9 1E13 1E13 1E13 1G7 3E20 3G10 3G14 3G16 3G12 3E19 1H19 1B21 3F13 3F15 3F17 3F19 3F21 1G7 3F15 3F17 3F19 3F21 3F13 1E15 1I6

10-10

A/C COMPRESSOR COVER R134A .............................. 90 - 79 A/C COMPRESSOR HOSE .............................................. 90 - 77 A/C COMPRESSOR MANIFOLD R134A ........................ 90 - 76 A/C COMPRESSOR PULLEY R134A .............................. 90 - 79 A/C COMPRESSOR R134A ............................................ 90 - 76 A/C COMPRESSOR SEAL KIT R134A............................ 90 - 81 A/C COMPRESSOR SEAL R134A .................................. 90 - 76 A/C CONDENSER AND OIL COOLER............................ 70 - 74 A/C CONDENSER, RADIATOR........................................ 20 - 18 ACCESS COVER FUEL INJECTION PUMP .................. 24 - 62 ACCESS DOOR, REAR HOOD AND STOP .................. 80 - 26 ACCESS PLATFORM AND STEP, ENGINE .................. 80 - 16 ACCESS SHIELD, SERVICE, L.H. .................................. 80 - 42 ACCESS SHIELD, SERVICE, R.H. .................................. 80 - 40 ACCUMULATOR AND MOUNTING, ONE GALLON ...... 70 - 40 ACCUMULATOR AND MOUNTING, ONE HALF GALLON, SINGLE ........................................................ 70 - 38 ACCUMULATOR PRESSURE GAUGE AND WIRING HARNESS .................................................................... 70 - 2 ADAPTER, OIL COOLER ................................................ 24 - 27 ADAPTER, OIL COOLER BYPASS ................................ 24 - 26 ADAPTER, WIRING HARNESS (CONTOUR MASTER) 40 - 38 ADAPTER, WIRING HARNESS (CONTOUR MASTER) 40 - 40 ADHESIVE,ROCKER ARM COVER GASKET ................ 24 - 21 ADJUST FORE-AND-AFT, SEAT .................................... 90 - 42 ADJUSTABLE REAR AXLE.............................................. 60 - 34 ADJUSTABLE REAR AXLE STEERING TIE RODS ...... 60 - 44 ADJUSTER, CAB SEAT HEIGHT .................................... 90 - 44 ADJUSTING BRACKET, CYLINDER DRIVE, DUAL-RANGE .............................................................. 121 - 46 ADJUSTING MOTOR, CONCAVE.................................... 40 - 68 ADJUSTING MOTOR, SEPARATOR FAN DRIVE .......... 40 - 65 ADJUSTING SCREW KIT, REEL DRIVE FLOW CONTROL VALVE........................................................ 125 - 25 AIR CLEANER AND INTAKE TUBES.............................. 30 - 8 AIR CONDITIONER AND HEATER SWITCH.................. 40 - 20 AIR CONDITIONER COMPRESSOR FAN PULLEY ...... 24 - 60 AIR CONDITIONER COMPRESSOR IDLER PULLEY.... 24 - 60 AIR CONDITIONER COMPRESSOR SUPPORT ............ 24 - 60 AIR CONDITIONER WIRING HARNESS ........................ 40 - 18 AIR CONDITIONING AND HEATER DUCTS .................. 90 - 29 AIR CONDITIONING AND HEATER HOUSING FILTERS........................................................................ 90 - 68 AIR CONDITIONING SYSTEM ........................................ 90 - 72 AIR CONDITIONING SYSTEM, COMPRESSOR R134A .......................................................................... 90 - 74 AIR CONDITIONING/HEATER AND PRESSURIZER FAN .............................................................................. 90 - 70 AIR FILTER AND HOUSING, CAB .................................. 90 - 28 AIR FILTER WARNING SWITCH,ENGINE PLUGGED .. 40 - 56 AIR INTER COOLER, RADIATOR .................................. 20 - 18 AIR SEAT SUSPENSION ................................................ 90 - 46 AIR SEAT SUSPENSION KITS........................................ 90 - 48 AIR SEAT SUSPENSION KITS........................................ 90 - 50 AIR SEAT SUSPENSION KITS........................................ 90 - 52 AIR SEAT SUSPENSION KITS........................................ 90 - 54 AIR SEAT WIRING HARNESS ........................................ 40 - 18 AIR SUSPENSION KITS, SEAT ...................................... 90 - 48 AIR SUSPENSION KITS, SEAT ...................................... 90 - 50 AIR SUSPENSION KITS, SEAT ...................................... 90 - 52 AIR SUSPENSION KITS, SEAT ...................................... 90 - 54 AIR SUSPENSION, SEAT ................................................ 90 - 46 ALTERNATOR ADJUSTING STRAP................................ 24 - 62 ALTERNATOR AND VOLTAGE REGULATOR (95 AMP), BOSCH .............................................................. 40 - 67

GRID 1E15 1I9 1E15 1I5 5C13 1G16 4G3 3C1 2D9 3G3 3G1 1G3 1G1 3F23 4D11 1C23 1E11 2C14 2I22 2F5 5E3 4J18 4C19 4J24 3C15 4J19 4J24 5B17 5B19 1I1 5C15 1H9 5C21 5C19 5B17 4J12 1H9 5B7 5D13 5D7 5C25 5C23 5B21 5B23 5E4 4J10 5D14 5D16 5D19 4J24 4J21 5C17 5D11 4C22 4C20

ALTERNATOR BRACKET ................................................

ALTERNATOR MOUNTING..............................................

ALTERNATOR SUPPORT ................................................

ALTERNATOR, SHEAVE AND BELT - BOSCH..............

ANGLES, GRAIN TANK EXTENSIONS ..........................

ANTENNA, SPEAKERS AND RADIO ..............................

ARM, LOCKOUT, DUAL-RANGE ....................................

ARM, REAR LADDER LANDING LATCH ........................

ARM, STEERING ..............................................................

ARMREST (L.H.) ..............................................................

ARMREST ADJUSTING MECHANISM, (R.H.) ................

ARMREST CONTROL PANEL ........................................

ARMREST WIRING HARNESS........................................

ARMREST WITH GLOVE BOX (R.H.) ............................

ARMS, FRAME, PRECLEANER CHAFFER ....................

ARMS, ROCKER ..............................................................

ASSEMBLY, CLUTCH (STARTER) ..................................

ASSEMBLY, HYDROSTATIC DRIVE PISTON ................

ASSEMBLY, SIX STACK SOLENOID CONTROL VALVE ..........................................................................

ATTENUATOR,UPPER, HYDRAULIC STEERING HOSES..........................................................................

AUGER BELTS ................................................................

AUGER CHAIN TIGHTENER, LOWER TAILINGS ..........

AUGER CLEANOUT DOOR, SHOE GRAIN SUPPLY, HANDLES AND LATCHES ..........................................

AUGER DRIVE SHIELD, UPPER TAILINGS ..................

AUGER DRIVE SHIELDS (R-H SIDE) ............................

AUGER DRIVE TIGHTENER, LOWER TAILINGS ..........

AUGER DRIVE, UPPER TAILINGS ................................

AUGER HOUSING, LOADING, UPPER CLEAN GRAIN ..........................................................................

AUGER HOUSING, LOADING, UPPER CLEAN GRAIN ..........................................................................

AUGER LIGHT, UNLOADING, GRAIN TANK..................

AUGER LOWER GEAR CASE, VERTICAL ....................

AUGER SENSOR AND WIRING HARNESS, UNLOADING ................................................................

AUGER SWIVEL SUPPORT AND BRACES ..................

AUGER SWIVEL, HORIZONTAL UNLOADING ..............

AUGER TRANSITION HOUSING ....................................

AUGER TROUGH, LOWER TAILINGS............................

AUGER WIRING HARNESS, UNLOADING ....................

AUGER, CLEAN GRAIN LOWER AND HINGED DOOR AUGER, CROSS, COVERS AND CHANNEL..................

AUGER, HORIZONTAL UNLOADING (17- AND 20-FT.) ..........................................................

AUGER, HORIZONTAL UNLOADING, DRIVE GEARCASE ..................................................................

AUGER, HORIZONTAL UNLOADING, HUB SUPPORT AND SWITCH ..............................................................

AUGER, LOADING, CLEAN GRAIN ................................

AUGER, LOADING, CLEAN GRAIN FOLD ....................

AUGER, LOWER TAILINGS, BELTS ..............................

AUGER, LOWER TAILINGS, SHAFT AND TIGHTENER..................................................................

AUGER, UNLOADING, COUNTERSHAFT DRIVE ..........

AUGER, UNLOADING, DRIVE BELT GUIDE..................

AUGER, UNLOADING, LUBE BANK ..............................

AUGER, UPPER TAILINGS..............................................

AUGER, UPPER TAILINGS, HOUSING AND PADDLE ASSEMBLY ..................................................

AUGER, VERTICAL UNLOADING AND CHARGE HOUSING......................................................................

AUGERS, GRAIN TANK CROSS ....................................

AUGERS, SHOE GRAIN SUPPLY AND HOUSING........

AUGERS, SUPPLY, SHOE GRAIN AND HOUSING ......

CTS II COMBINE PC2752

PAGE 24 - 62 40 - 70 24 - 62 40 - 66 130 - 34 40 - 28 121 - 38 80 - 20 50 - 56 90 - 60 90 - 58 40 - 14 40 - 12 90 - 56 120 - 56 24 - 20 24 - 58 50 - 34 70 - 58 60 - 18 170 - 2 125 - 42 120 - 38 125 - 50 80 - 34 125 - 44 125 - 50 130 - 12 130 - 14 40 - 62 130 - 36 40 - 46 130 - 42 130 - 40 130 - 12 125 - 36 40 - 46 130 - 2 130 - 60 130 - 54 130 - 46 130 - 44 130 - 16 130 - 18 170 - 3 125 - 34 130 - 62 130 - 64 130 - 68 125 - 50 125 - 46 130 - 38 130 - 58 120 - 42 120 - 40 (30-MAY-00) PN=10

1A12 CTS II COMBINE ALPHABETICAL INDEX - CONTINUED GRID 1F17 1F23 2B16 2C5 2F22 2B15 2F21 2G1 2F23

AUX FIELD LIGHT SWITCH, OPTIONAL........................

AUXILIARY FIELD LIGHTING ..........................................

AXLE SPACERS ..............................................................

AXLE, FINAL DRIVE ........................................................

AXLE, FIXED REAR (GRAIN) ..........................................

AXLE, FRONT ..................................................................

AXLE, REAR, ADJUSTABLE............................................

AXLE, REAR, SPINDLES ................................................

AXLE, REAR, SUPPORT..................................................

PAGE 40 - 4 40 - 10 50 - 10 50 - 24 60 - 35 50 - 9 60 - 34 60 - 40 60 - 36

B 3F5 1J15 5D19 1E3 1D6 1I13 4E7 2C4 1E17 5D9 2D4 1C16 4J16 2C5 2C7 1C16 2C24 2B22 2B24 5E6 4C17 4C11 4C13 4C15 4B16 4C9 4C7 4C5 1B10 5D16 4H3 1E15 3J1 3F7 3F8 5E4 5E3 5E6 5E4 5E3 5E4 5E4 5E4 5E5 5E3 5E5 5E5 5E6 5E4

BACKREST AND SEAT, OPERATOR’S ..........................

BACKSHAFT SPEED SENSOR, FEEDER HOUSE ........

BANK, LUBE, UNLOADING AUGER ..............................

BASE, FUEL FILTER ........................................................

BASE, OIL FILTER ..........................................................

BATTERIES, CABLE AND HOLDDOWN ........................

BEARING AND LUBE LINES, MODULE FRONT............

BEARING CAP, FINAL DRIVE ........................................

BEARING KIT, UNDERSIZED MAIN BEARING CRANKSHAFT ..............................................................

BEARING PLATE, CROSS AUGER, L.H.........................

BEARING, COVER AND QUILL ......................................

BEARING, THRUST..........................................................

BEARINGS, CHAIN AND SPROCKETS, TAILINGS ELEVATOR CONVEYOR ............................................

BEARINGS, FINAL DRIVE ..............................................

BEARINGS, FINAL DRIVE ..............................................

BEARINGS, MAIN ............................................................

BEARINGS, SEALS, SHAFT AND OUTER COVER CAM LOBE MOTOR ....................................................

BEARINGS, TRANSMISSION INPUT SHAFT ................

BEARINGS, TRANSMISSION PINION SHAFT................

BEATER BELTS SHEAVES ............................................

BEATER COVER ..............................................................

BEATER DRIVE BELT IDLER..........................................

BEATER DRIVE CONVERSION, DUAL SPEED 700/400 RPM ................................................................

BEATER GEARCASE AND SHEAVE ..............................

BEATER GRATE AND 13-BAR CONCAVE ASSEMBLY BEATER SHAFT AND DRIVE BELT................................

BEATER, STRIPPER ........................................................

BEATER, STRIPPER, DRIVE IDLER ..............................

BELT ,ENGINE FAN ........................................................

BELT GUIDE, UNLOADING AUGER DRIVE ..................

BELT PICKUP/REEL CHARGE PUMP MOUNTING AND SHEAVE ..............................................................

BELT TENSIONER (ALT.) ................................................

BELT, FAN, DUST, LH FEEDER HOUSE ......................

BELT, OPERATOR’S SEAT ............................................

BELT, SEAT - TRAINING SEAT ......................................

BELTS, AIR CONDITIONER COMPRESSOR ................

BELTS, AUGER ................................................................

BELTS, BEATER ..............................................................

BELTS, CLEAN GRAIN ELEVATOR................................

BELTS, CONVEYOR FEEDER ........................................

BELTS, COOLING FAN ....................................................

BELTS, CYLINDER DRIVE ..............................................

BELTS, DRIVE, CYLINDER INTERMEDIATE ................

BELTS, FAN, CLEANING ................................................

BELTS, FEEDER CONVEYOR ........................................

BELTS, FEEDER HOUSE ................................................

BELTS, HEADER AND REEL ..........................................

BELTS, LOWER TAILINGS AUGER ................................

BELTS, LOWER TAINLINGS AUGER ............................

CTS II COMBINE PC2752

(30-MAY-00)

90 - 38 40 - 100 130 - 68 24 - 50 24 - 28 40 - 74 120 - 78 50 - 23 24 - 64 130 - 56 50 - 51 24 - 13 125 - 40 50 - 24 50 - 26 24 - 13 50 - 46 50 - 16 50 - 18 170 - 5 120 - 36 120 - 30 120 - 32 120 - 34 120 - 10 120 - 28 120 - 26 120 - 24 20 - 6 130 - 64 121 - 62 24 - 62 110 - 48 90 - 40 90 - 41 170 - 3 170 - 2 170 - 5 170 - 3 170 - 2 170 - 3 170 - 3 170 - 3 170 - 4 170 - 2 170 - 4 170 - 4 170 - 5 170 - 3

GRID 5E4 5E5 5E5 5E5 5E6 5E6 5E3 2I16 1B17 1C9 1C21 1I6 1I5 3E13 5C21 1E15 2E24 1I11 4J17 4C1 1H13 2J20 2E24 2E15 2E17 2E19 2E13 2E15 2E21 2E23 1I15 1C6 1C20 1D4 1D6

BELTS, ROTARY SCREEN..............................................

BELTS, STRAW CHOPPER ............................................

BELTS, STRAW SPREADER ..........................................

BELTS, UNLOADING AUGERS ......................................

BELTS, UNLOADING SYSTEM........................................

BELTS, UPPER TAILINGS AUGER ................................

BELTS, WALKER ..............................................................

BI-DIRECTIONAL MODULE, SOLENOID CONTROL VALVE, REEL LIFT AND CYLINDER SPEED ............

BLOCK, ENGINE, COOLANT HEATER ..........................

BLOCK, SHORT................................................................

BOLTS, CYLINDER HEAD ..............................................

BOSCH ALTERNATOR AND VOLTAGE REGULATOR BOSCH ALTERNATOR, SHEAVE AND BELT ................

BOX, TOOL ......................................................................

BRACES AND SWIVEL SUPPORT, AUGER ..................

BRACKET, ALTERNATOR ..............................................

BRACKET, BRAKE CABLE SUPPORT ..........................

BRACKET, REEL SPEED MOTOR..................................

BRACKET, TAILINGS DRIVE AND LOWER TROUGH SUPPORT ....................................................

BRACKETS, CONCAVE INDICATOR AND CABLE ........

BRACKETS, LOW SHAFT SPEED SENSORS ..............

BRACKETS, SOLENOID CONTROL VALVE ..................

BRAKE CABLE SUPPORT BRACKET ............................

BRAKE CYLINDERS, MASTER AND BRAKE PEDALS BRAKE LINES, MASTER CYLINDER AND RESERVOIR ................................................................

BRAKE MASTER CYLINDER ..........................................

BRAKE PEDAL AND SEAL, PARKING ..........................

BRAKE PEDALS AND CYLINDERS, MASTER ..............

BRAKE SHOES AND DRUM............................................

BRAKE SLAVE CYLINDER ..............................................

BREAKERS, CIRCUIT, ENGINE COMPARTMENT ........

BUSHING, CAMSHAFT ....................................................

BUSHING, CAMSHAFT ....................................................

BYPASS TUBES, OIL COOLER ......................................

BYPASS VALVE, OIL FILTER..........................................

PAGE 170 - 3 170 - 4 170 - 4 170 - 4 170 - 5 170 - 5 170 - 2 70 - 52 20 - 14 24 - 6 24 - 18 40 - 67 40 - 66 90 - 22 130 - 42 24 - 62 60 - 13 40 - 72 125 - 41 120 - 20 40 - 50 70 - 81 60 - 13 60 - 4 60 - 6 60 - 8 60 - 2 60 - 4 60 - 10 60 - 12 40 - 76 24 - 2 24 - 17 24 - 26 24 - 28

C 3E19 1F14 3E3 3E1 3E5 3H1 3D23 3E15 3E17 3D17 1F19 3E21 3D21 3E7 1F21 3F11 3D19 1F15 2B8 4C1 2B10 1I13 2C23 2D5

CAB AIR FILTER AND HOUSING .................................. 90 - 28 CAB DOME LIGHT .......................................................... 40 - 1 CAB DOOR AND GLASS ................................................ 90 - 12 CAB DOOR LATCH .......................................................... 90 - 10 CAB FRAME AND SUPPORT.......................................... 90 - 14 CAB HARDWARE KIT ...................................................... 90 - 84 CAB INTERIOR TRIM PANELS ...................................... 90 - 8 CAB L.H. LANDING AND MIRROR ................................ 90 - 24 CAB LANDING AND MIRROR (R.H.) .............................. 90 - 26 CAB PANELS AND FLOOR MAT .................................... 90 - 2 CAB POST INSTRUMENT PANEL .................................. 40 - 6 CAB POST INSTRUMENT PANEL .................................. 90 - 30 CAB REAR AND SIDE SEALS ........................................ 90 - 6 CAB ROOF AND SUPPORTS.......................................... 90 - 16 CAB ROOF LIGHTS ........................................................ 40 - 8 CAB SEAT HEIGHT ADJUSTER .................................... 90 - 44 CAB SOUND DEADENING, FOAM AND SEALS............ 90 - 4 CAB WIRING HARNESS .................................................. 40 - 2 CABLE AND SWITCH, HYDROSTATIC DRIVE LEVE R.................................................................................... 50 - 2 CABLE, CONCAVE INDICATOR, AND BRACKETS ...... 120 - 20 CABLE, HYDROSTATIC DRIVE CONTROL.................... 50 - 4 CABLES, BATTERY.......................................................... 40 - 74 CAM LOBE MOTOR ........................................................ 50 - 44 CAM, CARRIER AND PISTONS ...................................... 50 - 52

10-11 PN=11

1A13 CTS II COMBINE ALPHABETICAL INDEX - CONTINUED GRID 2B19 1C20 1C6 1C20 1C20 1C23 1C20 2C4 5C15 1C6 2D7 2D5 2E4 1F19 3E21 1I21 4J6 4I17 4I15 4I21 4I13 4J2 4J4 2G20 4I19 4J8 4G15 4D13 4D15 4D17 4D11 4D7 4D5 4J18 3I10 4J16 5D13 5C17 2J23 4H3 2C15 4I21 5C15 1F19 3E21 1I21 1I15 1I15 5C1 5B24 5B21

10-12

PAGE CAM, SHIFTER, TRANSMISSION AND DIFFERENTIAL ............................................................

CAMSHAFT ......................................................................

CAMSHAFT BUSHING ....................................................

CAMSHAFT BUSHING ....................................................

CAMSHAFT FOLLOWER..................................................

CAMSHAFT FOLLOWER..................................................

CAMSHAFT GEAR............................................................

CAP, BEARING, FINAL DRIVE ........................................

CAP, GRAIN TANK CLEAN OUT CHUTE ......................

CAPS, MAIN BEARING ....................................................

CAPS, YOKE AND PIVOTS ............................................

CARRIER, PISTONS AND CAM ......................................

CASE DRAIN HYDRAULIC LINES, FOUR WHEEL DRIVE ..........................................................................

CDC (COMBINE DATA CENTER) ..................................

CDC (COMBINE DATA CENTER) ..................................

CENTRAL ELECTRONICS MODULE AND CIRCUIT BOARDS ......................................................................

CHAFF SPREADER (DUAL MOTOR) HOSES AND LINES ............................................................................

CHAFF SPREADER (DUAL MOTOR) PAN, WINGS AND SEALS..................................................................

CHAFF SPREADER (DUAL MOTOR) SHIELDS AND HANDLES ............................................................

CHAFF SPREADER CONTROL, CHECK VALVE, ROD AND KNOB ..........................................................

CHAFF SPREADER DISC (DUAL MOTOR)....................

CHAFF SPREADER LINES AND FITTINGS ..................

CHAFF SPREADER LINES, HOSES, VALVE AND PUMP ............................................................................

CHAFF SPREADER MOTOR (EATON) ..........................

CHAFF SPREADER MOUNTING SUPPORT ..................

CHAFF SPREADER PUMP ..............................................

CHAFFER DRIVE, CONVEYOR AUGERS AND SIEVE CHAFFER ELEMENT........................................................

CHAFFER EXTENSION ELEMENT ................................

CHAFFER FRAME ............................................................

CHAFFER FRAME ARMS, PRECLEANER ....................

CHAFFER FRAME, PRECLEANER ................................

CHAFFER, PRECLEANING..............................................

CHAIN TIGHTENER, LOWER TAILINGS AUGER ..........

CHAIN, IDLER SHAFT AND DRUM, FEEDER CONVEYOR ..................................................................

CHAIN, SPROCKETS AND BEARINGS, TAILINGS ELEVATOR CONVEYOR ............................................

CHANNEL AND COVERS, CROSS AUGER ..................

CHARGE HOUSING, VERTICAL UNLOADING AUGER..........................................................................

CHARGE PRESSURE HOSE ..........................................

CHARGE PUMP MOUNTING AND SHEAVE, REEL/ BELT PICKUP ..............................................................

CHARGE PUMP, HYDROSTATIC DRIVE ......................

CHECK VALVE, ROD, KNOB AND CONTROL, CHAFF SPREADER ....................................................

CHUTE, GRAIN TANK CLEAN OUT ..............................

CIRCUIT BOARD, COMBINE DATA CENTER................

CIRCUIT BOARD, COMBINE DATA CENTER................

CIRCUIT BOARDS, CENTRAL ELECTRONICS MODU LE ..................................................................................

CIRCUIT BREAKER RELAYS ..........................................

CIRCUIT BREAKERS, ENGINE COMPARTMENT..........

CLEAN GRAIN ELEVATOR DRIVE TIGHTENER AND IDLER............................................................................

CLEAN GRAIN ELEVATOR GEARCASE AND SHEAVE........................................................................

CLEAN GRAIN LOADING AUGER ..................................

50 - 13 24 - 17 24 - 2 24 - 17 24 - 17 24 - 20 24 - 17 50 - 23 130 - 36 24 - 2 50 - 54 50 - 52 50 - 75 40 - 6 90 - 30 40 - 82 125 - 30 125 - 16 125 - 14 125 - 20 125 - 12 125 - 26 125 - 28 70 - 8 125 - 18 125 - 32 121 - 50 120 - 58 120 - 60 120 - 62 120 - 56 120 - 52 120 - 50 125 - 42 110 - 32 125 - 40 130 - 60 130 - 38 70 - 84 121 - 62 50 - 35 125 - 20 130 - 36 40 - 6 90 - 30

GRID 5B23 5B7 5B9 5B11 5C15 1F1 4D3 4C24 4D1 4G17 1J13 3I1 1E11 4F17 3I16 1F3 2F9 2F7 3G6 1F19 3E21 3B15 3B17 3B19 3G21 3G19 5E4 3G16 1I7 4B16 4C1 4C3 4B14 4B22 4B20 2J13 1C13 1J7 1E5 1D24 1J9 1J11 1I23 1F17 3I1 3J7 2H19 3I5 2I18

40 - 82 40 - 76 40 - 76 130 - 22 130 - 20 130 - 16

2J9 2J10 1H1 1H3 3H23

CLEAN GRAIN LOADING AUGER, FOLD ......................

CLEAN GRAIN LOWER AUGER AND HINGED DOOR CLEAN GRAIN LOWER ELEVATOR AND CONVEYOR CHAIN ..........................................................................

CLEAN GRAIN LOWER ELEVATOR AND CONVEYOR CHAIN ..........................................................................

CLEAN OUT CHUTE, GRAIN TANK ..............................

CLEANER, AIR AND INTAKE TUBES ............................

CLEANING FAN INTAKE SHIELDS ................................

CLEANING FANS AND SHROUDS ................................

CLEANING FANS AND SHROUDS ................................

CLEANING SHOE AND CONVEYOR AUGER PIVOT ARM DRIVE TIGHTENER ............................................

CLEANING SHOE LAMP INSTALLATION ......................

CLOSURE PLATES, FEEDER HOUSE - CONTOUR MASTER ......................................................................

CLUTCH ASSEMBLY(STARTER) ....................................

CLUTCH, HEADER ELECTROMAGNETIC......................

CLUTCH, SLIP, FEEDER HOUSE ..................................

COLD WEATHER STARTING AID ..................................

COLUMN, STEERING (LOWER)......................................

COLUMN, STEERING (UPPER) ......................................

COLUMN, STEERING (UPPER) ......................................

COMBINE DATA CENTER ..............................................

COMBINE DATA CENTER ..............................................

COMPARTMENT, ENGINE ..............................................

COMPARTMENT, ENGINE ..............................................

COMPARTMENT, ENGINE ..............................................

COMPRESSOR HARDWARE KIT R134A ......................

COMPRESSOR, A/C, HOSE ............................................

COMPRESSOR, AIR CONDITIONING BELTS................

COMPRESSOR, AIR CONDITIONING SYSTEM R134A ..........................................................................

CONCAVE ADJUSTING MOTOR ....................................

CONCAVE ASSEMBLY AND BEATER GRATE,13-BAR NARROW ......................................................................

CONCAVE INDICATOR, CABLE AND BRACKETS ........

CONCAVE INDICATOR, CORN AND SMALL GRAIN ....

CONCAVE, RASP BAR AND GRATE ............................

CONCAVE, SPIKE TOOTH ..............................................

CONCAVE, SPIKE-TOOTH ..............................................

CONDENSER, A/C............................................................

CONNECTING RODS ......................................................

CONNECTORS AND TERMINALS, SUPPLEMENTARY CONNECTORS, ELECTRICAL, WEATHERPACK ..........

CONNECTORS, FUEL INJECTION PUMP HOUSING ..

CONNECTORS, LOWER HARNESS, 6076 ENGINE ENGINE ........................................................................

CONNECTORS, UPPER HARNESS, 6076 ENGINE ......

CONNECTORS, WEATHERPACK ..................................

CONSOLE PANEL, OVERHEAD......................................

CONTOUR MASTER - FEEDER HOUSE FRAME, TILT BEAM & CLOSURE PLATES..............................

CONTOUR MASTER DRIVESHAFT ................................

CONTOUR MASTER HYDRAULIC HOSES, L.H SIDE (OPTIONAL) ..................................................................

CONTOUR MASTER LOCKOUT ADAPTER KIT (BELT PU & 4R CORN HEADS) ............................................

CONTOUR MASTER SOLENOID CONTROL RELIEF VALVE ..........................................................................

CONTOUR MASTER TILT CYLINDER ............................

CONTOUR MASTER TILT CYLINDER HOSES AND FITTINGS ......................................................................

CONTOUR MASTER WIRING HARNESS ......................

CONTOUR MASTER WIRING HARNESS ADAPTER ....

CONTOUR MASTER, FEEDER HOUSE SHELL, WEAR PLATES AND SEALS ......................................

CTS II COMBINE PC2752

PAGE 130 - 18 130 - 2 130 - 4 130 - 6 130 - 36 30 - 8 120 - 48 120 - 44 120 - 46 121 - 52 40 - 98 110 - 22 24 - 58 121 - 28 110 - 38 30 - 10 60 - 22 60 - 20 90 - 64 40 - 6 90 - 30 80 - 10 80 - 12 80 - 14 90 - 80 90 - 77 170 - 3 90 - 74 40 - 68 120 - 10 120 - 20 120 - 22 120 - 8 120 - 16 120 - 14 70 - 74 24 - 10 40 - 92 24 - 52 24 - 46 40 - 94 40 - 96 40 - 84 40 - 4 110 - 22 110 - 54 70 - 32 110 - 26 70 - 54 70 - 70 70 - 71 40 - 38 40 - 40 110 - 20 (30-MAY-00) PN=12

1A14 CTS II COMBINE ALPHABETICAL INDEX - CONTINUED GRID 3I3 2B10 1G3 1D22 2D11 4J1 2I22 2D12 4I23 2C17 4I25 2J20 2J19 2I19 4I21 1J19 1J17 2G23 4G17 5E3 4G15 5B9 5B11 3I10 1B17 1F9 1D5 2J13 2H1 2H3 5E4 4C3 3D3 3C24 3D1 4G13 5D14 4F13 4F15 1B16 4E16 4C17 3G20 3B15 2C9 1E15 2B19 2C11 2D1 1D5 2D4 1C24 1D12 4B7

PAGE CONTOUR MASTER, LOCKOUT ASSEMBLY (OPTIONAL) ..................................................................

CONTROL CABLE, HYDROSTATIC DRIVE....................

CONTROL PANEL, ARMREST ........................................

CONTROL UNIT, ELECTRONIC ......................................

CONTROL VALVE ............................................................

CONTROL VALVE ADJUSTING SCREW KIT, REEL DRIVE FLOW ....................................................

CONTROL VALVE MODULE, SIX STACK SOLENOID ASSEMBLY & MOUNTINGS........................................

CONTROL VALVE SOLENOID ........................................

CONTROL VALVE, FLOW, REEL DRIVE ......................

CONTROL VALVE, HYDROSTATIC DRIVE, DISPLACEMENT ..........................................................

CONTROL VALVE, REEL DRIVE FLOW, SEAL REPAIR KIT ..................................................................

CONTROL VALVE, SOLENOID, BRACKETS..................

CONTROL VALVE, SOLENOID, ENGINE GEARCASE PRESSURE REGULATOR ..........................................

CONTROL VALVE, SOLENOID, FOR AUGER SWING..

CONTROL, CHECK VALVE, ROD AND KNOB, CHAFF SPREADER ....................................................

CONVENIENCE OUTLET ................................................

CONVENIENCE OUTLET, KIT ........................................

CONVERSION PARTS, HUDRAULIC, 200 SERIES CUTTING PLATFORM..................................................

CONVEYOR AUGER AND CLEANING SHOE PIVOT ARM DRIVE TIGHTENER ............................................

CONVEYOR AUGER BELTS, ..........................................

CONVEYOR AUGERS, SIEVE AND CHAFFER DRIVE CONVEYOR CHAIN AND ELEVATOR, CLEAN GRAIN LOWER ........................................................................

CONVEYOR CHAIN AND ELEVATOR, CLEAN GRAIN LOWER ........................................................................

CONVEYOR IDLER SHAFT, DRUM AND CHAIN, FEEDER........................................................................

COOLANT HEATER, ENGINE BLOCK............................

COOLANT RECOVERY TANK ........................................

COOLER, ENGINE OIL ....................................................

COOLER, OIL, ..................................................................

COOLER, OIL, FEEDER HOUSE ....................................

COOLER, OIL, FEEDER HOUSE GEARCASE ..............

COOLING FAN BELTS ....................................................

CORN AND SMALL GRAIN CONCAVE INDICATOR ....

CORNER SHEET AND DOOR, FRONT, L.H. ................

CORNER SHEET, R.H., FRONT......................................

CORNER SHEET, REAR, L H ........................................

COUNTERSHAFT DRIVE, SECONDARY........................

COUNTERSHAFT DRIVE, UNLOADING AUGER ..........

COUNTERSHAFT GEARCASE, PRIMARY ....................

COUNTERSHAFT, PRIMARY, GEARCASE ....................

COUPLING WITH HUB, ENGINE GEARCASE ..............

COUPLING, GEARBOX AND SHAFT, MODULE ............

COVER, BEATER ............................................................

COVER, COMPRESSOR A/C R134A ..............................

COVER, ENGINE ..............................................................

COVER, FRONT, HYDROSTATIC DRIVE PUMP ..........

COVER, FUEL INJECTION PUMP ACCESS ..................

COVER, HOUSING, TRANSMISSION AND DIFFERENTIAL ............................................................

COVER, HYDROSTATIC DRIVE PUMP..........................

COVER, INNER ................................................................

COVER, OIL COOLER ....................................................

COVER, QUILL AND BEARING ......................................

COVER, ROCKER ARM ..................................................

COVER, THERMOSTAT ..................................................

COVER, THRESHING CYLINDER ..................................

CTS II COMBINE PC2752

(30-MAY-00)

110 - 24 50 - 4 40 - 14 24 - 44 50 - 58 125 - 25 70 - 58 50 - 59 125 - 22 50 - 38 125 - 24 70 - 81 70 - 80 70 - 55 125 - 20 40 - 104 40 - 102 70 - 11 121 - 52 170 - 2 121 - 50 130 - 4 130 - 6 110 - 32 20 - 14 30 - 16 24 - 27 70 - 74 70 - 14 70 - 16 170 - 3 120 - 22 80 - 48 80 - 44 80 - 46 121 - 48 130 - 62 121 - 24 121 - 26 20 - 12 121 - 2 120 - 36 90 - 79 80 - 10 50 - 28 24 - 62 50 - 13 50 - 30 50 - 48 24 - 27 50 - 51 24 - 21 24 - 34 120 - 1

GRID 1C19 5D13 4E5 4E3 1B19 1C14 1E9 1C19 1C15 1E9 5D9 5D13 5D11 3G5 4I9 4I7 5C9 2G23 1C6 4B7 4B10 4G11 4G1 4G7 4G9 4G5 4F23 4F21 1C21 1C21 1C21 1E7 2F20 1C13 2I16 2I12 2E23 2E19 2J5 2H21 2J3 2F19 4B12 4B18 2J9 2J10 2J7 2E15

COVER, TIMING GEAR....................................................

COVERS AND CHANNEL, CROSS AUGER ..................

COVERS AND FRAME, MODULE ..................................

CRANK OUT SYSTEM, MODULE ..................................

CRANKCASE OIL DRAIN, ENGINE ................................

CRANKSHAFT ..................................................................

CRANKSHAFT DAMPERS ..............................................

CRANKSHAFT FRONT OIL SEAL ..................................

CRANKSHAFT KIT, UNDERSIZE (CONNECTING ROD JOURNAL) ................................

CRANKSHAFT PULLEY AND DAMPERS ......................

CROSS AUGER BEARING PLATE, L.H. ........................

CROSS AUGER COVERS AND CHANNEL....................

CROSS AUGERS, GRAIN TANK ....................................

CUP HOLDER ..................................................................

CURTAIN, LOWER, STRAW SPREADER ......................

CURTAIN, SPREADER, UPPER ......................................

CURTAINS, GRAIN TANK................................................

CUTTING PLATFORM , 200 SERIES CONVERSION PARTS ..........................................................................

CYLINDER BLOCK FITTINGS ........................................

CYLINDER COVER, THRESHING ..................................

CYLINDER DOOR ............................................................

CYLINDER DRIVE ADJUSTING BRACKET, DUAL-RANGE ..............................................................

CYLINDER DRIVE GEARCASE, DUAL-RANGE ............

CYLINDER DRIVE INTERMEDIATE SHAFT MOUNTING, DUAL-RANGE ........................................

CYLINDER DRIVE INTERMEDIATE SHEAVE, DUAL-RANGE ..............................................................

CYLINDER DRIVE TIGHTENER, DUAL-RANGE ............

CYLINDER DRIVE, SINGLE RANGE ..............................

CYLINDER DRIVE, SLOW SPEED..................................

CYLINDER HEAD ............................................................

CYLINDER HEAD BOLTS ................................................

CYLINDER HEAD GASKET ............................................

CYLINDER HEAD GASKET KIT ......................................

CYLINDER KIT, STEERING ............................................

CYLINDER LINERS ..........................................................

CYLINDER SPEED AND REEL LIFT, SOLENOID CONTROL VALVE........................................................

CYLINDER SPEED HYDRAULIC LINES AND HOSES ..

CYLINDER, BRAKE SLAVE ............................................

CYLINDER, BRAKE, MASTER ........................................

CYLINDER, DRIVE, GRAIN TANK UNLOADING............

CYLINDER, HEADER LIFT, HYDRAULIC ......................

CYLINDER, HYDRAULIC, UNLOADING AUGER SWING, LINES AND HOSES ......................................

CYLINDER, STEERING ....................................................

CYLINDER, THRESHING, RASP BAR ............................

CYLINDER, THRESHING, SPIKE TOOTH ......................

CYLINDER, TILT - CONTOUR MASTER ........................

CYLINDER, TILT, HOSES AND FITTINGS CONTOUR MASTER....................................................

CYLINDER, UNLOADING AUGER SWING HYDRAULIC..................................................................

CYLINDERS, MASTER BRAKE AND BRAKE PEDALS

PAGE 24 - 16 130 - 60 120 - 76 120 - 74 20 - 16 24 - 11 24 - 56 24 - 16 24 - 12 24 - 56 130 - 56 130 - 60 130 - 58 90 - 62 125 - 8 125 - 6 130 - 30 70 - 11 24 - 2 120 - 1 120 - 4 121 - 46 121 - 36 121 - 42 121 - 44 121 - 40 121 - 34 121 - 32 24 - 18 24 - 18 24 - 18 24 - 54 60 - 33 24 - 10 70 - 52 70 - 48 60 - 12 60 - 8 70 - 66 70 - 34 70 - 64 60 - 32 120 - 6 120 - 12 70 - 70 70 - 71 70 - 68 60 - 4

D 1C14 1E9 1F19 3E21 5G5 5G7

DAMPER KEY .................................................................. 24 - 11 DAMPERS, CRANKSHAFT .............................................. 24 - 56 DATA CENTER, COMBINE .............................................. 40 - 6 DATA CENTER, COMBINE .............................................. 90 - 30 DECALS, FRONT.............................................................. 170 - 52 DECALS, FRONT.............................................................. 170 - 54

10-13 PN=13

1A15 CTS II COMBINE ALPHABETICAL INDEX - CONTINUED GRID 5G10 5G9 5G5 5G7 5G10 5G9 5E7 5E9 5E11 5E13 5E15 5E17 5E19 5E21 5E23 5F1 5F3 5F5 5F9 5F11 5F13 5F15 5F17 5F19 5F21 5F23 5G1 5G3 5G13 5G12 4H7 1H14 3B19 5D24 5D22 5D23 2H22 2B17 2C1 2C1 1D15 4I13 2C17 1F14 3E3 3D3 3E1 4B10 3B11 5B7 4H23 3C9 3C7 1B8 4B8 4I11 4H21 1D12 1D8 1B19 4C9

10-14

DECALS, FRONT..............................................................

DECALS, FRONT WHEEL................................................

DECALS, REAR ................................................................

DECALS, REAR ................................................................

DECALS, REAR ................................................................

DECALS, REAR WHEEL ..................................................

DECALS, SAFETY AND LOCATIONS ............................

DECALS, SAFETY AND LOCATIONS ............................

DECALS, SAFETY AND LOCATIONS ............................

DECALS, SAFETY AND LOCATIONS ............................

DECALS, SAFETY AND LOCATIONS ............................

DECALS, SAFETY AND LOCATIONS ............................

DECALS, SAFETY AND LOCATIONS - FRENCH ..........

DECALS, SAFETY AND LOCATIONS - FRENCH ..........

DECALS, SAFETY AND LOCATIONS - FRENCH ..........

DECALS, SAFETY AND LOCATIONS - FRENCH ..........

DECALS, SAFETY AND LOCATIONS - FRENCH ..........

DECALS, SAFETY AND LOCATIONS - ITALIAN ..........

DECALS, SAFETY AND LOCATIONS - ITALIAN ..........

DECALS, SAFETY AND LOCATIONS - ITALIAN ..........

DECALS, SAFETY AND LOCATIONS - ITALIAN ..........

DECALS, SAFETY AND LOCATIONS - ITALIAN ..........

DECALS, SAFETY AND LOCATIONS - ITALIAN ..........

DECALS, SAFETY AND LOCATIONS - ITALIAN ..........

DECALS, SAFETY AND LOCATIONS - ITALIAN ..........

DECALS, SAFETY AND LOCATIONS - ITALIAN ..........

DECALS, SAFETY AND LOCATIONS - ITALIAN ..........

DECALS, SAFETY AND LOCATIONS - ITALIAN ..........

DECALS, SEPARATOR MODULE SAFETY....................

DECALS, TOP ..................................................................

DECK, SUPPORTS AND FINS, STRAW CHOPPER......

DEFLECTOR - LESS HARVESTRAK ..............................

DEFLECTOR, ENGINE COMPARTMENT ......................

DIAL-A-MATIC ELECTRICAL HARNESS ........................

DIAL-A-MATIC HEADER HEIGHT CONTROL HYDRAULIC LINE AND VALVE BLOCK ....................

DIAL-A-MATIC HEADER HEIGHT CONTROL VALVE BLOCK SOLENOID ........................................

DIAL-A-MATIC HEADER HEIGHT CONTROL, VALVE BLOCK SOLENOID ........................................

DIFFERENTIAL AND TRANSMISSION HOUSING ........

DIFFERENTIAL GEARS ..................................................

DIFFERENTIAL SHAFTS..................................................

DIPSTICK, ENGINE OIL ..................................................

DISC, CHAFF SPREADER (DUAL MOTOR) ..................

DISPLACEMENT CONTROL VALVE, HYDROSTATIC DRIVE ..........................................................................

DOME LIGHT, CAB ..........................................................

DOOR AND GLASS, CAB ................................................

DOOR AND SHEET, L.H. FRONT CORNER ..................

DOOR LATCH, CAB ........................................................

DOOR, CYLINDER............................................................

DOOR, ENGINE ACCESS, HANDRAILS, RADIATOR....................................................................

DOOR, HINGED, CLEAN GRAIN LOWER AUGER........

DOOR, LOWER, STRAW CHOPPER ..............................

DOOR, REAR HOOD........................................................

DOOR, REAR HOOD ACCESS AND STOP ..................

DOOR, ROTARY SCREEN ..............................................

DOOR, SEAL AND STONE TRAP, SEPARATOR/ FEEDER HOUSE..........................................................

DOOR, STRAW SPREADER............................................

DOOR, UPPER REAR, STRAW CHOPPER ..................

DRAIN VALVE, CYLINDER HEAD ..................................

DRAIN VALVE, OIL PAN..................................................

DRAIN, ENGINE CRANKCASE OIL ................................

DRIVE BELT AND BEATER SHAFT................................

PAGE 170 - 58 170 - 56 170 - 52 170 - 54 170 - 58 170 - 56 170 - 6 170 - 8 170 - 10 170 - 12 170 - 14 170 - 16 170 - 18 170 - 20 170 - 22 170 - 24 170 - 26 170 - 28 170 - 32 170 - 34 170 - 36 170 - 38 170 - 40 170 - 42 170 - 44 170 - 46 170 - 48 170 - 50 170 - 61 170 - 60 121 - 66 40 - 51 80 - 14 160 - 4 160 - 2 160 - 3 70 - 35 50 - 11 50 - 20 50 - 20 24 - 37 125 - 12 50 - 38 40 - 1 90 - 12 80 - 48 90 - 10 120 - 4 80 - 6 130 - 2 121 - 82 80 - 28 80 - 26 20 - 4 120 - 2 125 - 10 121 - 80 24 - 34 24 - 30 20 - 16 120 - 28

GRID 4C11 4J17 4J23 2B10 2C17 1C14 4E20 4E18 4C5 2B8 2C21 2C19 2E5 2C14 2C9 2C12 2J1 2C6 4F11 3C19 3C15 3H19 3H17 3C11 5C1 4H1 3H15 4J19 4G17 3H13 2B12 2B13 5D14 5E4 5E4 1B12 4G19 4G23 2C3 2D17 2D15 2G18 1B6 4G13 1B10 4E22 4E24 4H5 4I5 3J7 2E21 3I10 1I1 4C13

DRIVE BELT, BEATER, IDLER........................................

DRIVE BRACKET, TAILINGS AND LOWER TROUGH SUPPORT ....................................................

DRIVE CHAIN TIGHTENER, UPPER TAILINGS ............

DRIVE CONTROL CABLE, HYDROSTATIC....................

DRIVE DISPLACEMENT CONTROL VALVE HYDROSTATIC ............................................................

DRIVE GEAR, OIL PUMP ................................................

DRIVE GEARCASE, MODULE, L.H.................................

DRIVE GEARCASE, MODULE, R.H. ..............................

DRIVE IDLER, STRIPPER BEATER................................

DRIVE LEVER, CABLE AND SWITCH HYDROSTATI C....................................................................................

DRIVE MOTOR KIT, HYDROSTATIC ..............................

DRIVE MOTOR, HYDROSTATIC ....................................

DRIVE MOTOR, HYDROSTATIC ....................................

DRIVE PISTON ASSEMBLY, HYDROSTATIC ................

DRIVE PUMP, HYDROSTATIC ........................................

DRIVE PUMP, HYDROSTATIC ........................................

DRIVE PUMP, REEL/BELT PICKUP................................

DRIVE SHAFT SHIELDS, FINAL ....................................

DRIVE SHAFT, GEARCASE MOUNTING AND PRIMARY COUNTERSHAFT ......................................

DRIVE SHIELD, R.H. REAR ............................................

DRIVE SHIELDS, AUGER (R-H SIDE) ............................

DRIVE SHIELDS, CONTOUR MASTER FEEDER HOUSE..........................................................................

DRIVE SHIELDS, SAFETY STOP, FEEDER HOUSE ....

DRIVE SIDE SHIELDS, SEPARATOR ............................

DRIVE TIGHTENER AND IDLER, CLEAN GRAIN ELEVATOR ..................................................................

DRIVE TIGHTENER, FEEDER HOUSE ..........................

DRIVE TIGHTENER, FIXED SPEED FEEDER HOUSE..........................................................................

DRIVE TIGHTENER, LOWER TAILINGS AUGER ..........

DRIVE TIGHTENER, PIVOT ARM, CLEANING SHOE AND CONVEYOR AUGER ..............................

DRIVE TIGHTENER, VARIABLE SPEED ........................

DRIVE WHEELS ..............................................................

DRIVE WHEELS, HIGH FLOATATION PLANETARY FINAL DRIVE ........................................

DRIVE, COUNTERSHAFT, UNLOADING AUGER ..........

DRIVE, CYLINDER INTERMEDIATE, BELTS ................

DRIVE, CYLINDER, BELTS..............................................

DRIVE, ENGINE................................................................

DRIVE, FAN, SEPARATOR..............................................

DRIVE, FAN, SPEED CONTROL SHEAVE LINKAGE....

DRIVE, FINAL ..................................................................

DRIVE, HYDROSTATIC, LOWER OIL LINES (FOUR WHEEL DRIVE) ..............................................

DRIVE, HYDROSTATIC, LOWER OIL LINES (TWO WHEEL DRIVE) ................................................

DRIVE, REEL, FLOW CONTROL VALVE ......................

DRIVE, ROTARY SCREEN ..............................................

DRIVE, SECONDARY COUNTERSHAFT........................

DRIVES, ENGINE FAN ....................................................

DRIVES, ENGINE GEARBOX TO MODULE ..................

DRIVES, ENGINE GEARBOX TO MODULE ..................

DRIVES, STRAW CHOPPER ..........................................

DRIVES, STRAW SPREADER ........................................

DRIVESHAFT, CONTOUR MASTER ..............................

DRUM, BRAKE..................................................................

DRUM, CHAIN AND IDLER SHAFT, FEEDER CONVEYOR ..................................................................

DUAL LEVEL MONITOR HARNESS, GRAIN TANK ......

DUAL SPEED BEATER DRIVE CONVERSION, 700/400 RPM ................................................................

CTS II COMBINE PC2752

PAGE 120 - 30 125 - 41 125 - 48 50 - 4 50 - 38 24 - 11 121 - 6 121 - 4 120 - 24 50 - 2 50 - 42 50 - 40 50 - 76 50 - 34 50 - 28 50 - 32 70 - 62 50 - 25 121 - 22 80 - 38 80 - 34 110 - 16 110 - 14 80 - 30 130 - 22 121 - 60 110 - 12 125 - 44 121 - 52 110 - 10 50 - 6 50 - 7 130 - 62 170 - 3 170 - 3 20 - 8 121 - 54 121 - 58 50 - 22 50 - 64 50 - 62 70 - 6 20 - 2 121 - 48 20 - 6 121 - 8 121 - 10 121 - 64 125 - 4 110 - 54 60 - 10 110 - 32 40 - 62 120 - 32 (30-MAY-00) PN=14

1A16 CTS II COMBINE ALPHABETICAL INDEX - CONTINUED GRID 2B14 4G11 4G1 4G7 4G9 4G5 4G3 3E20 3J1 3I24 2H1

PAGE DUAL WHEELS, WIDE-SPACED (PLANETARY FINAL DRIVE) ......................................

DUAL-RANGE CYLINDER DRIVE ADJUSTING BRACKET......................................................................

DUAL-RANGE CYLINDER DRIVE GEARCASE ..............

DUAL-RANGE CYLINDER DRIVE INTERMEDIATE SHAFT MOUNTING......................................................

DUAL-RANGE CYLINDER DRIVE INTERMEDIATE SHEAVE........................................................................

DUAL-RANGE CYLINDER DRIVE TIGHTENER ............

DUAL-RANGE LOCKOUT ARM ......................................

DUCTS, HEATER AND AIR CONDITIONING ................

DUST FAN BELT, LH FEEDER HOUSE ........................

DUST FAN, LH SIDE FEEDER HOUSE..........................

DUST SUPPRESSSION, LUBE OIL PUMP ....................

50 - 8 4F7 121 - 46 121 - 36

4F9

121 - 42

4F3

121 - 44 121 - 40 121 - 38 90 - 29 110 - 48 110 - 46 70 - 14

4F1

E 1D22 1I17 1E21 1J1 1J3 5D24 1J8 1E5 4F17 1D22 1I19 1D22 1I21 4D13 4D15 4D19 5B9 5B11 5B15 5C3 5E4 4J14 5B13 3B11 3B21 1B17 1I15 3B15 3B17 3B19 1B19 1B12 1B10 4E22 4E24 1B16 2J15 2J17 2J19

E.C.U. ................................................................................

ECU MOUNTING SUPPORT (SN -XXXXXX) ......................................................

ELECTRIC FUEL PUMP, WATER SEPARATOR AND FUEL FLOAT ................................................................

ELECTRICAL CONNECTOR SERVICE KIT ....................

ELECTRICAL CONNECTOR SERVICE KIT ....................

ELECTRICAL HARNESS, DIAL-A-MATIC........................

ELECTRICAL SERVICE OUTLET ....................................

ELECTRICAL TERMINALS AND CONNECTORS, WEATHERPACK ..........................................................

ELECTROMAGNETIC HEADER CLUTCH ......................

ELECTRONIC CONTROL UNIT ......................................

ELECTRONIC CONTROL UNIT MOUNTING SUPPORT ELECTRONIC FUEL INJECTION PUMP ........................

ELECTRONICS MODULE AND CIRCUIT BOARD, CENTRAL......................................................................

ELEMENT, CHAFFER ......................................................

ELEMENT, CHAFFER EXTENSION ................................

ELEMENT, SIEVE ............................................................

ELEVATOR AND CONVEYOR CHAIN, CLEAN GRAIN LOWER ........................................................................

ELEVATOR AND CONVEYOR CHAIN, CLEAN GRAIN LOWER ........................................................................

ELEVATOR SHAFT, SPROCKET AND SHEAVE, UPPER CLEAN GRAIN................................................

ELEVATOR SHIELDS, UPPER CLEAN GRAIN ..............

ELEVATOR, CLEAN GRAIN BELTS................................

ELEVATOR, TAILINGS, HOUSING..................................

ELEVATOR, UPPER CLEAN GRAIN ..............................

ENGINE ACCESS DOOR, HANDRAILS, AND RADIATOR DOOR........................................................

ENGINE ACCESS PLATFORM AND STEP ....................

ENGINE BLOCK COOLANT HEATER ............................

ENGINE CIRCUIT BREAKERS ........................................

ENGINE COMPARTMENT................................................

ENGINE COMPARTMENT................................................

ENGINE COMPARTMENT................................................

ENGINE CRANKCASE OIL DRAIN..................................

ENGINE DRIVE ................................................................

ENGINE FAN AND DRIVES ............................................

ENGINE GEARBOX TO MODULE DRIVES ....................

ENGINE GEARBOX TO MODULE DRIVES ....................

ENGINE GEARCASE COUPLING WITH HUB ................

ENGINE GEARCASE OIL FILTER ASSEMBLY ..............

ENGINE GEARCASE PRESSURE REGULATOR ..........

ENGINE GEARCASE PRESSURE REGULATOR, SOLENOID CONTROL VALVE ....................................

CTS II COMBINE PC2752

(30-MAY-00)

GRID 4F5

24 - 44 40 - 78 30 - 4 40 - 86 40 - 88 160 - 4 40 - 93 24 - 52 121 - 28 24 - 44 40 - 80 24 - 44 40 - 82 120 - 58 120 - 60 120 - 64

1B14 1B13 1C5 1D5 1D15 1D15 1D6 1D2 1D1 1C11 1H19 3B15 1E7 1C8 1E14 1F19 3E21 1F3 1D19 1D18 1D18 1D18 1F5 1C21 1C21 4D15 5C11

PAGE ENGINE GEARCASE- SEPARATOR DRIVE WETCLUTCH AND PUMP DRIVE SHAFT ........................

ENGINE GEARCASE, SEPARATOR AND PUMP DRIVE ..........................................................................

ENGINE GEARCASE, SEPARATOR AND PUMP DRIVE ..........................................................................

ENGINE GEARCASE, STRAW CHOPPER, UNLOADING DRIVE AND SEPARATOR DRIVE GEAR ..........

ENGINE GEARCASE, UNLOADING AND SEPARATOR DRIVE GEAR................................................................

ENGINE INTERCOOLER..................................................

ENGINE MOUNTS AND REAR SUPPORT ....................

ENGINE OIL (TORQ-GARD PLUS-50) ............................

ENGINE OIL COOLER ....................................................

ENGINE OIL DIPSTICK ....................................................

ENGINE OIL DIPSTICK TUBE ........................................

ENGINE OIL FILTER ........................................................

ENGINE OIL PUMP ..........................................................

ENGINE OIL PUMP INTAKE............................................

ENGINE OVERHAUL KIT ................................................

ENGINE PLUGGED AIR FILTER WARNING SWITCH ..

ENGINE RAILS ................................................................

ENGINE REBUILD GASKET KIT ....................................

ENGINE SERVICE PARTS, KEY ....................................

ENGINE SPEED SENSOR ..............................................

ENGINE TEMPERATURE GAUGE ..................................

ENGINE TEMPERATURE GAUGE ..................................

ETHER STARTING AID....................................................

ETHER STARTING FITTINGS ........................................

EXHAUST MANIFOLD GASKETS....................................

EXHAUST MANIFOLD HEAT SHIELD ............................

EXHAUST MANIFOLDS....................................................

EXHAUST PIPES AND MUFFLER ..................................

EXHAUST VALVE SHIELD ..............................................

EXHAUST VALVES ..........................................................

EXTENSION ELEMENT, CHAFFER ................................

EXTENSIONS, GRAIN TANK ..........................................

121 - 16 121 - 18 121 - 20 121 - 14 121 - 12 20 - 10 20 - 9 24 - 1 24 - 27 24 - 37 24 - 37 24 - 28 24 - 24 24 - 23 24 - 8 40 - 56 80 - 10 24 - 54 24 - 4 24 - 61 40 - 6 90 - 30 30 - 10 24 - 41 24 - 40 24 - 40 24 - 40 30 - 12 24 - 18 24 - 18 120 - 60 130 - 32

F 130 - 4 130 - 6 130 - 10 130 - 24 170 - 3 125 - 38 130 - 8 80 - 6 80 - 16 20 - 14 40 - 76 80 - 10 80 - 12 80 - 14 20 - 16 20 - 8 20 - 6 121 - 8 121 - 10 20 - 12 70 - 76 70 - 78

1I4 3C17 4G21 4G23 1E2 4G19 1E2 1E13 5E5 3I24 1B10 3G12 4C24 4D1 3I14 5E3 3I12 3I10 1J15 5E5 3H19

FAN DRIVE ADJUSTING MOTOR, SEPARATOR ..........

FAN DRIVE AND MUD SHIELDS (L.H. SIDE)................

FAN DRIVE SPEED CONTROL LINKAGE......................

FAN DRIVE SPEED CONTROL SHEAVE LINKAGE......

FAN DRIVE, FIXED ..........................................................

FAN DRIVE, SEPARATOR ..............................................

FAN PULLEY HUB............................................................

FAN PULLEY, AIR CONDITIONER COMPRESSOR ......

FAN, CLEANING, BELTS ................................................

FAN, DUST, LH SIDE FEEDER HOUSE ........................

FAN, ENGINE AND DRIVES............................................

FAN, PRESSURIZER AND AIR CONDITIONING/ HEATER........................................................................

FANS AND SHROUDS, CLEANING ................................

FANS AND SHROUDS, CLEANING ................................

FEED PLATE LATCH HANDLE ......................................

FEEDER CONVEYOR BELTS..........................................

FEEDER CONVEYOR DRIVE CHAIN, TIGHTENER AND GUIDES................................................................

FEEDER CONVEYOR IDLER SHAFT, DRUM AND CHAIN ..........................................................................

FEEDER HOUSE BACKSHAFT SPEED SENSOR ........

FEEDER HOUSE BELTS ................................................

FEEDER HOUSE DRIVE SHIELDS - CONTOUR MASTER ......................................................................

40 - 65 80 - 36 121 - 56 121 - 58 24 - 49 121 - 54 24 - 49 24 - 60 170 - 4 110 - 46 20 - 6 90 - 70 120 - 44 120 - 46 110 - 36 170 - 2 110 - 34 110 - 32 40 - 100 170 - 4 110 - 16

70 - 80

10-15 PN=15

1A17 CTS II COMBINE ALPHABETICAL INDEX - CONTINUED GRID 3H17 4H1 3H15 3J1 3I24 3I8 3H21 3I1 3J5 2H3 2H5 2G24 2H1 3I20 3F1 3H9 3H23 3I16 3I6 2G22 3H23 3I18 1F17 1F23 1J23 4E9 2H23 1F1 1D6 1E3 2J15 1C19 3G10 2C3 2C5 2C4 2C7 2C6 4H13 4H11 4E9 4H7 2H5 4J2 1C6 1D19 1E19 1E23 2J10 1E2 2F22 2G7

10-16

PAGE FEEDER HOUSE DRIVE SHIELDS AND SAFETY STOP ............................................................................

FEEDER HOUSE DRIVE TIGHTENER............................

FEEDER HOUSE DRIVE TIGHTENER (FIXED SPEED) ........................................................................

FEEDER HOUSE DUST FAN BELT, LH ........................

FEEDER HOUSE DUST FAN, LH SIDE..........................

FEEDER HOUSE FLOOR ................................................

FEEDER HOUSE FRAME ................................................

FEEDER HOUSE FRAME, TILT BEAM & CLOSURE PLATES, CONTOUR MASTER....................................

FEEDER HOUSE FRONT DRIVE SHAFT, SHEAVE AND MOUNTINGS (FIXED SPEED WITH ..................

FEEDER HOUSE GEARCASE OIL COOLER ................

FEEDER HOUSE OIL COOLER GEARBOX FITTINGS AND HOSES ................................................................

FEEDER HOUSE OIL COOLER LUBE OIL PUMP ........

FEEDER HOUSE OIL COOLER, LUBE OIL PUMP........

FEEDER HOUSE RETURN FLOOR ................................

FEEDER HOUSE REVERSER FOOT CONTROL ..........

FEEDER HOUSE REVERSER FOOT CONTROL ..........

FEEDER HOUSE SHELL - CONTOUR MASTER ..........

FEEDER HOUSE SLIP CLUTCH ....................................

FEEDER HOUSE UPPER SHAFT ..................................

FEEDER HOUSE VARIABLE DRIVE HYDRAULIC HOSE ............................................................................

FEEDER HOUSE WEAR PLATES - CONTOUR MASTER ......................................................................

FEEDER HOUSE, UPPER COUNTERSHAFT VARIABLE DRIVE ........................................................

FIELD LIGHT SWITCH, AUX, OPTIONAL ......................

FIELD LIGHTING, AUXILIARY ........................................

FIELD LIGHTS ..................................................................

FILLER PLATE, MODULE GRATE ASSEMBLY AND FINGER BAR ......................................................

FILTER ASSEMBLY, MAIN, HYDRAULIC ......................

FILTER, AIR AND INTAKE TUBES ................................

FILTER, ENGINE OIL ......................................................

FILTER, FUEL ..................................................................

FILTER, OIL, ENGINE GEARCASE, ASSEMBLY ..........

FILTER, WATER PUMP (WEEP HOLE)..........................

FILTERS, AIR CONDITIONING AND HEATER HOUSING......................................................................

FINAL DRIVE ....................................................................

FINAL DRIVE AXLE, GEAR AND BEARINGS ................

FINAL DRIVE HOUSING AND BEARING CAP ..............

FINAL DRIVE PINION, SHAFTS AND BEARINGS ........

FINAL DRIVE SHAFT SHIELDS ......................................

FINE CUT ROTOR STRAW CHOPPER (PADDLED NARROW (670401) ............................................

FINE CUT ROTOR STRAW CHOPPER (STRAIGHT NARROW (670401) ............................................

FINGER BAR, FILLER PLATE AND MODULE GRATE ASSEMBLY ....................................................

FINS, SUPPORTS AND DECK, STRAW CHOPPER......

FITTINGS AND HOSES, OIL COOLER, GEARBOX, FEEDER HOUSE..........................................................

FITTINGS AND LINES, CHAFF SPREADER ..................

FITTINGS, CYLINDER BLOCK ........................................

FITTINGS, ETHER STARTING ........................................

FITTINGS, FUEL TANK ....................................................

FITTINGS, TANK FUEL LINES ........................................

FITTINGS, TILT CYLINDER - CONTOUR MASTER ......

FIXED FAN DRIVE ..........................................................

FIXED REAR AXLE (GRAIN) ..........................................

FIXED REAR AXLE STEERING TIE RODS GRAIN ..........................................................................

110 - 14 121 - 60 110 - 12 110 - 48 110 - 46 110 - 30 110 - 18 110 - 22 110 - 52 70 - 16 70 - 18 70 - 12 70 - 14 110 - 42 90 - 34 110 - 6 110 - 20 110 - 38 110 - 28 70 - 10 110 - 20 110 - 40 40 - 4 40 - 10 40 - 108 120 - 80 70 - 36 30 - 8 24 - 28 24 - 50 70 - 76 24 - 16 90 - 68 50 - 22 50 - 24 50 - 23 50 - 26 50 - 25 121 - 72 121 - 70 120 - 80 121 - 66 70 - 18 125 - 26 24 - 2 24 - 41 30 - 2 30 - 6 70 - 71 24 - 49 60 - 35

GRID 2G3 3H15 2J21 1E21 3D17 3I8 2E1 2G18 4I23 1C18 1C18 3D19 1C20 1C23 3H9 3F1 3F9 2B17 2E4 2D23 2E1 4E5 3E5 4D11 4D17 3H21 3I1 3B9 4D21 4I9 1F22 2B15 3D3 3C24 1C19 3H11 3D7 3D9 2F3 3H5 1D12 5G9 1E3 1E3 1E3 1E3 1E21 1F19 3E21 1E1 1D20 1D22 1E15 1D24 1D22 1D20 1D22 1E19 1D25

PAGE FIXED REAR AXLE, 4-WHEEL DRIVE, STEERING TIE RODS - GRAIN......................................................

FIXED SPEED FEEDER HOUSE DRIVE TIGHTENER ..

FLAT O-RING KIT, HYDRAULIC......................................

FLOAT, FUEL....................................................................

FLOOR MAT AND PANELS, CAB ..................................

FLOOR, FEEDER HOUSE ..............................................

FLOW CONTROL VALVE TO CAM LOBE MOTORS, LINES AND HOSES ....................................................

FLOW CONTROL VALVE, REEL DRIVE ........................

FLOW CONTROL VALVE, REEL DRIVE ........................

FLYWHEEL........................................................................

FLYWHEEL HUB ..............................................................

FOAM, SEALS, SOUND DEADENING, CAB ..................

FOLLOWER, CAMSHAFT ................................................

FOLLOWER, CAMSHAFT ................................................

FOOT CONTROL, FEEDER HOUSE REVERSER..........

FOOT CONTROL, REVERSER, FEEDER HOUSE ........

FORE-AND-AFT, SEAT ADJUST ....................................

FORKS, SHIFTER ............................................................

FOUR WHEEL DRIVE CASE DRAIN HYDRAULIC LINES ............................................................................

FOUR WHEEL DRIVE HYDRAULIC LINES AND HOS ES, L.H. ........................................................................

FOUR WHEEL DRIVE LINES AND HOSES ..................

FRAME AND COVERS, MODULE ..................................

FRAME AND SUPPORT, CAB ........................................

FRAME ARMS, PRECLEANER CHAFFER ....................

FRAME, CHAFFER ..........................................................

FRAME, FEEDER HOUSE ..............................................

FRAME, FEEDER HOUSE, CONTOUR MASTER ..........

FRAME, SEPARATOR......................................................

FRAME, SIEVE ................................................................

FRAME, STRAW SPREADER..........................................

FRONT AND REAR TURN AND TAIL LIGHTS ..............

FRONT AXLE ....................................................................

FRONT CORNER SHEET AND DOOR, L.H. ..................

FRONT CORNER SHEET, R.H. ......................................

FRONT OIL SEAL ............................................................

FRONT SHAFT WITH REVERSER (VARIABLE) 9400, 9500 COMBINES ..............................................

FRONT SHIELD ASSEMBLY, LEFT SIDE ......................

FRONT SHIELD ASSEMBLY, RIGHT SIDE ....................

FRONT STEERING HOSES AND LINES ........................

FRONT VARIABLE DRIVE SHEAVE AND MOUNTINGS ................................................................

FRONT WATER MANIFOLD ............................................

FRONT WHEEL DECALS ................................................

FUEL CHECK VALVE ......................................................

FUEL FILTER ....................................................................

FUEL FILTER BASE ........................................................

FUEL FILTER LINES ........................................................

FUEL FLOAT ....................................................................

FUEL GAUGE ..................................................................

FUEL GAUGE ..................................................................

FUEL INJECTION NOZZLE..............................................

FUEL INJECTION NOZZLES ..........................................

FUEL INJECTION PUMP..................................................

FUEL INJECTION PUMP ACCESS COVER ..................

FUEL INJECTION PUMP HOUSING CONNECTORS ....

FUEL LEAK-OFF LINES ..................................................

FUEL LINES ......................................................................

FUEL SHUT-OFF SOLENOID (FIP) ................................

FUEL TANK, SUPPORTS, AND FITTINGS ....................

FUEL TRANSFER PUMP (ROBERT BOSCH) ................

60 - 42 110 - 12 70 - 82 30 - 4 90 - 2 110 - 30 50 - 72 70 - 6 125 - 22 24 - 15 24 - 15 90 - 4 24 - 17 24 - 20 110 - 6 90 - 34 90 - 42 50 - 11 50 - 75 50 - 70 50 - 72 120 - 76 90 - 14 120 - 56 120 - 62 110 - 18 110 - 22 80 - 4 120 - 66 125 - 8 40 - 9 50 - 9 80 - 48 80 - 44 24 - 16 110 - 8 80 - 52 80 - 54 60 - 16 110 - 2 24 - 34 170 - 56 24 - 50 24 - 50 24 - 50 24 - 50 30 - 4 40 - 6 90 - 30 24 - 48 24 - 42 24 - 44 24 - 62 24 - 46 24 - 44 24 - 42 24 - 44 30 - 2 24 - 47

60 - 46 CTS II COMBINE PC2752

(30-MAY-00) PN=16

1A18 CTS II COMBINE ALPHABETICAL INDEX - CONTINUED GRID

PAGE

G 1C24 1E7 1E7 1E7 1C21 1D14 1D6 1D8 1D2 1D1 1C17 1C24 1D12 1C19 1D16 1D12 1D10 1D18 2G14 1F19 3E21 3H7 5C15 1C20 2C5 1D22 1C14 1D2 1C18 2H5 4E22 4E24 4E16 4C15 5B24 1B16 4F11 4G1 4F5 4F9 5C25 2E7 4E20 4E18 4F13 4F15 2C1 2B22 2B24 2B20 3E23 3E3 3F23 4D9 5C9 5C7 5D11 1I1 5C11 5C13

GASKET ADHESIVE, ROCKER ARM COVER ..............

GASKET KIT, CYLINDER HEAD ....................................

GASKET KIT, ENGINE REBUILD ....................................

GASKET KIT, SHORT BLOCK ........................................

GASKET, CYLINDER HEAD ............................................

GASKET, INTAKE MANIFOLD ........................................

GASKET, OIL FILTER HOUSING ....................................

GASKET, OIL PAN ..........................................................

GASKET, OIL PUMP ........................................................

GASKET, OIL PUMP INTAKE ..........................................

GASKET, REAR OIL SEAL ..............................................

GASKET, ROCKER ARM COVER ..................................

GASKET, THERMOSTAT ................................................

GASKET, TIMING GEAR COVER....................................

GASKET, TURBOCHARGER ..........................................

GASKET, WATER MANIFOLD ........................................

GASKET, WATER PUMP ................................................

GASKETS, EXHAUST MANIFOLD ..................................

GAUGE, ACCUMULATOR PRESSURE ..........................

GAUGE, ENGINE TEMPERATURE ................................

GAUGE, ENGINE TEMPERATURE ................................

GEAR BOX, REVERSER..................................................

GEAR CASE, VERTICAL AUGER LOWER ....................

GEAR, CAMSHAFT ..........................................................

GEAR, FINAL DRIVE........................................................

GEAR, INJECTION PUMP................................................

GEAR, OIL PUMP DRIVE ................................................

GEAR, OIL PUMP DRIVE ................................................

GEAR, STARTER..............................................................

GEARBOX FITTINGS AND HOSES, OIL COOLER, FEEDER HOUSE..........................................................

GEARBOX, ENGINE TO MODULE DRIVES ..................

GEARBOX, ENGINE TO MODULE DRIVES ..................

GEARBOX, SHAFT AND COUPLING, MODULE ............

GEARCASE AND SHEAVE, BEATER ............................

GEARCASE AND SHEAVE, CLEAN GRAIN ELEVATOR ..................................................................

GEARCASE COUPLING, ENGINE ..................................

GEARCASE MOUNTING, PRIMARY COUNTERSHAFT AND DRIVE SHAFT ....................................................

GEARCASE, DUAL-RANGE CYLINDER DRIVE ............

GEARCASE, ENGINE ......................................................

GEARCASE, ENGINE ......................................................

GEARCASE, HORIZONTAL UNLOADING AUGER DRIVE ..........................................................................

GEARCASE, HYDROSTATIC DRIVE PUMP,MAIN HYDRAULIC PUMP CONNECTING HARDWARE ......

GEARCASE, MODULE DRIVE, L,H.................................

GEARCASE, MODULE DRIVE, R.H. ..............................

GEARCASE, PRIMARY COUNTERSHAFT ....................

GEARCASE, PRIMARY COUNTERSHAFT ....................

GEARS, DIFFERENTIAL ..................................................

GEARS, TRANSMISSION INPUT SHAFT ......................

GEARS, TRANSMISSIONPINION SHAFT ......................

GEARSHIFT LEVER AND LINKAGE ..............................

GEARSHIFT LEVER AND LINKAGE ..............................

GLASS AND DOOR, CAB ................................................

GLOVE BOX, ARMREST (R.H.) ......................................

GRAIN LEAK KIT ..............................................................

GRAIN TANK AND CURTAINS........................................

GRAIN TANK BASE..........................................................

GRAIN TANK CROSS AUGERS......................................

GRAIN TANK DUAL LEVEL MONITOR HARNESS........

GRAIN TANK EXTENSIONS ............................................

GRAIN TANK EXTENSIONS SUPPORT AND ANGLES

CTS II COMBINE PC2752

(30-MAY-00)

24 - 21 24 - 54 24 - 54 24 - 54 24 - 18 24 - 36 24 - 28 24 - 30 24 - 24 24 - 23 24 - 14 24 - 21 24 - 34 24 - 16 24 - 38 24 - 34 24 - 32 24 - 40 70 - 2 40 - 6 90 - 30 110 - 4 130 - 36 24 - 17 50 - 24 24 - 44 24 - 11 24 - 24 24 - 15 70 - 18 121 - 8 121 - 10 121 - 2 120 - 34 130 - 20 20 - 12 121 - 22 121 - 36 121 - 16 121 - 20 130 - 46 50 - 78 121 - 6 121 - 4 121 - 24 121 - 26 50 - 20 50 - 16 50 - 18 50 - 14 90 - 32 90 - 12 90 - 56 120 - 54 130 - 30 130 - 28 130 - 58 40 - 62 130 - 32 130 - 34

GRID 5D17 5C5 2J5 2J5 1H23 4B14 5D16 3I12

GRAIN TANK SAMPLING TROUGH................................

GRAIN TANK TOP............................................................

GRAIN TANK UNLOADING DRIVE CYLINDER..............

GRAIN TANK UNLOADING DRIVE CYLINDER MOUNTING ..................................................................

GRAIN TANK WIRING HARNESS, LIGHT, LIMIT SWITCH AND LEVEL MONITOR ................................

GRATE AND RASP BAR CONCAVE ..............................

GUIDE, DRIVE BELT, UNLOADING AUGER..................

GUIDES, TIGHTENER AND FEEDER CONVEYOR DRIVE CHAIN ..............................................................

PAGE 130 - 66 130 - 26 70 - 66 70 - 66 40 - 60 120 - 8 130 - 64 110 - 34

H 4C19 4I15 3E9 3B11 3H1 3G21 2E7 1J9 1J11 1H1 1G1 1F15 1I1 1H17 1E11 1H15 1G7 1H3 1H7 1G5 1F19 3E21 1H11 1H11 1C21 1C21 5E5 4F17 2H22 5D23 5D22 5D24 2H21 2H17 2I14 1A9 1D18 1G9 3E20 3G10 3G23 1G7 1B17 3F11

HANDLE, LATCHES, SHOE GRAIN SUPPLY AUGER CLEANOUT DOOR ......................................................

HANDLES AND SHIELDS, CHAFF SPREADER (DUAL MOTOR)............................................................

HANDRAIL AND LADDER, OPERATOR’S PLATFORM HANDRAILS, RADIATOR DOOR, ENGINE ACCESS DOOR ..........................................................

HARDWARE KIT, CAB ....................................................

HARDWARE KIT, COMPRESSOR R134A ......................

HARDWARE, HYDRAULIC PUMP CONNECTING ........

HARNESS CONNECTORS, LOWER, 6076 ENGINE ....

HARNESS CONNECTORS, UPPER, 6076 ENGINE ......

HARNESS WIRING, MAIN, L.H. CENTER ......................

HARNESS, ARMREST WIRING ......................................

HARNESS, CAB WIRING ................................................

HARNESS, GRAIN TANK DUAL LEVEL MONITOR ......

HARNESS, LOWER, ENGINE, 6076 ..............................

HARNESS, STARTER, WIRING ......................................

HARNESS, UPPER, ENGINE, 6076 ................................

HARNESS, WIRING, A/C, HEATER AND AIRSEAT ......

HARNESS, WIRING, MAIN, L.H. CENTER ....................

HARNESS, WIRING, R.H. MAIN......................................

HARNESS, WIRING, STEERING COLUMN ....................

HARVESTRAK ..................................................................

HARVESTRAK ..................................................................

HARVESTRAK MONITOR SYSTEM ................................

HARVESTRAK WIRING HARNESS ................................

HEAD BOLT KIT ..............................................................

HEAD, CYLINDER ............................................................

HEADER BELTS ..............................................................

HEADER ELECTROMAGNETIC CLUTCH ......................

HEADER HEIGHT CONTROL VALVE ............................

HEADER HEIGHT CONTROL VALVE ............................

HEADER HEIGHT CONTROL, DIAL-A-MATIC HYDRAULIC LINE AND VALVE BLOCK ....................

HEADER HEIGHT CONTROL, ELECTRIC HARNESS, DIAL-A-MATIC ..........................................

HEADER LIFT CYLINDER, HYDRAULIC ........................

HEADER LIFT HYDRAULIC LINES AND HOSES ..........

HEADER LIFT MODULE, SOLENOID CONTROL VALVE ..........................................................................

HEADERS..........................................................................

HEAT SHIELD, EXHAUST MANIFOLD............................

HEATER AND AIR CONDITIONER SWITCH..................

HEATER AND AIR CONDITIONING DUCTS ..................

HEATER HOUSING AND AIR CONDITIONING FILTERS........................................................................

HEATER SYSTEM ............................................................

HEATER WIRING HARNESS ..........................................

HEATER, COOLANT, ENGINE BLOCK ..........................

HEIGHT ADJUSTER, CAB SEAT ....................................

120 - 38 125 - 14 90 - 18 80 - 6 90 - 84 90 - 80 50 - 78 40 - 94 40 - 96 40 - 38 40 - 12 40 - 2 40 - 62 40 - 54 24 - 58 40 - 52 40 - 18 40 - 40 40 - 44 40 - 16 40 - 6 90 - 30 40 - 48 40 - 48 24 - 18 24 - 18 170 - 4 121 - 28 70 - 35 160 - 3 160 - 2 160 - 4 70 - 34 70 - 30 70 - 50 10 - 8 24 - 40 40 - 20 90 - 29 90 - 68 90 - 82 40 - 18 20 - 14 90 - 44

10-17 PN=17

1A19 CTS II COMBINE ALPHABETICAL INDEX - CONTINUED GRID 2B13 1I13 3G5 3C3 3C7 5D7 5C25 5D1 5D3 5D5 5C23 5C19 3G19 2J23 2G22 4J6 2E1 2D23 2H17 2I12 2H13 2H9 2D21 2J11 2D13 2H7 2G16 2H11 2F3 2F11 2J3 2I8 2J5 2H19 4K7 4K5 2D17 2D15 2I10 1F7 2F5 2J10 2D19 4J4 3E19

10-18

PAGE HIGH FLOATATION DRIVE WHEELS PLANETARY FINAL DRIVE ........................................

HOLDDOWN, BATTERY ..................................................

HOLDER, CUP ..................................................................

HOOD, REAR....................................................................

HOOD, REAR, ACCESS DOOR AND STOP ..................

HORIZONTAL UNLOADING AUGER (17- AND 20-FT.) ..........................................................

HORIZONTAL UNLOADING AUGER DRIVE GEARCASE ..................................................................

HORIZONTAL UNLOADING AUGER HOUSING (14- AND 17-FT.) ..........................................................

HORIZONTAL UNLOADING AUGER HOUSING (17- AND 20-FT.) ..........................................................

HORIZONTAL UNLOADING AUGER HOUSING (17- AND 20-FT.) ..........................................................

HORIZONTAL UNLOADING AUGER HUB SUPPORT AND SWITCH ..............................................................

HORIZONTAL UNLOADING AUGER SWIVEL................

HOSE, A/C COMPRESSOR ............................................

HOSE, CHARGE PRESSURE..........................................

HOSE, HYDRAULIC, VARIABLE DRIVE, FEEDER HOUSE..........................................................................

HOSES AND LINES, CHAFF SPREADER (DUAL MOTOR)............................................................

HOSES AND LINES, FOUR WHEEL DRIVE ..................

HOSES AND LINES, FOUR WHEEL DRIVE HYDRAU LIC, L.H.........................................................................

HOSES AND LINES, HEADER LIFT ..............................

HOSES AND LINES, HYDRAULIC, CYLINDER SPEED ..........................................................................

HOSES AND LINES, HYDRAULIC, REEL FOREAND-AFT, FRONT ........................................................

HOSES AND LINES, HYDRAULIC, REEL PUMP ..........

HOSES AND LINES, OIL COOLER, HYDROSTATIC ....

HOSES AND LINES, OIL COOLER, WET CLUTCH ......

HOSES AND LINES, OIL, HYDROSTATIC DRIVE, LOWER (TWO WHEEL DRIVE) ..................................

HOSES AND LINES, REEL DRIVE, HYD., FRONT........

HOSES AND LINES, REEL DRIVE, HYDRAULIC, L.H. SIDE ......................................................................

HOSES AND LINES, REEL LIFT ....................................

HOSES AND LINES, STEERING, FRONT ......................

HOSES AND LINES, STEERING, REAR ........................

HOSES AND LINES, UNLOADING AUGER SWING HYDRAULIC CYLINDER ..............................................

HOSES AND LINES, UPPER RETURN, HYDRAULIC RESERVOIR ................................................................

HOSES, GRAIN TANK UNLOADING DRIVE CYLINDER ....................................................................

HOSES, HYDRAULIC, CONTOUR MASTER (L.H.) (OPTIONAL) ..................................................................

HOSES, LUBE, L. H. ........................................................

HOSES, LUBE, R. H.........................................................

HOSES, OIL, HYDROSTATIC DRIVE, LOWER (FOUR WHEEL DRIVE) ..............................................

HOSES, OIL, HYDROSTATIC DRIVE, LOWER (TWO WHEEL DRIVE) ................................................

HOSES, PRESSURE, HYDRAULIC ................................

HOSES, RADIATOR ........................................................

HOSES, STEERING, UPPER ..........................................

HOSES, TILT CYLINDER - CONTOUR MASTER ..........

HOSES, UPPER, HYDROSTATIC DRIVE (FOUR WHEEL DRIVE) ..............................................

HOSES, VALVE, PUMP AND LINES, CHAFF SPREADER ..................................................................

HOUSING AND AIR FILTER, CAB ..................................

50 - 7 40 - 74 90 - 62 80 - 22 80 - 26 130 - 54 130 - 46

GRID 4H17 4H19 4J21 4C20 4C22 1D24 2B19 2C4 5D1

130 - 48 5D3 130 - 50 5D5 130 - 52 130 - 44 130 - 40 90 - 77 70 - 84 70 - 10 125 - 30 50 - 72 50 - 70 70 - 30 70 - 48

2C12 1D6 1C17 2F24 2F25 4J14 1D12 5C23 1B10 1E2 1C18 2H23 2J21 2G22

70 - 26 70 - 22 50 - 68 70 - 72

2I12

50 - 60 70 - 20

2H17 2D23

70 - 4 70 - 24 60 - 16 60 - 24

2H13

2H19

2G16 2H7

70 - 64 70 - 44

2H9 2E4

70 - 66

2H15

70 - 32 125 - 58 125 - 56

2J7 2I10 2E7

50 - 64 50 - 62 70 - 46 30 - 14 60 - 18 70 - 71

2I24 2I6 2F5 2I8 2I1

50 - 66 125 - 28 90 - 28

2C15 2C16

HOUSING AND KNIFEBANK, STRAW CHOPPER ........

HOUSING AND KNIFEBANK, STRAW CHOPPER ........

HOUSING AND PADDLE ASSEMBLY, UPPER TAILINGS AUGER........................................................

HOUSING AND SHOE GRAIN SUPPLY AUGERS ........

HOUSING AND SHOE GRAIN SUPPLY AUGERS ........

HOUSING CONNECTORS, FUEL INJECTION PUMP ..

HOUSING COVER, TRANSMISSION AND DIFFERENTIAL ............................................................

HOUSING, FINAL DRIVE ................................................

HOUSING, HORIZONTAL UNLOADING AUGER (14- AND 17-FT.) ..........................................................

HOUSING, HORIZONTAL UNLOADING AUGER (17- AND 20-FT.) ..........................................................

HOUSING, HORIZONTAL UNLOADING AUGER (17- AND 20-FT.) ..........................................................

HOUSING, HYDROSTATIC DRIVE PUMP......................

HOUSING, OIL FILTER ....................................................

HOUSING, REAR OIL SEAL ............................................

HOUSING, SPINDLE, REAR AXLE ................................

HOUSING, SPINDLE, REAR AXLE GRAIN ..........................................................................

HOUSING, TAILINGS ELEVATOR ..................................

HOUSING, THERMOSTAT, FRONT ................................

HUB SUPPORT AND SWITCH, HORIZONTAL UNLOADING AUGER ..................................................

HUB, ENGINE FAN ..........................................................

HUB, FAN PULLEY ..........................................................

HUB, FLYWHEEL..............................................................

HYDRAULIC FILTER ASSEMBLY, MAIN ........................

HYDRAULIC FLAT O-RING KIT ......................................

HYDRAULIC HOSE, VARIABLE DRIVE, FEEDER HOUSE..........................................................................

HYDRAULIC HOSES, CONTOUR MASTER (L.H.) (OPTIONAL) ..................................................................

HYDRAULIC LINES AND HOSES, CYLINDER SPEED ..........................................................................

HYDRAULIC LINES AND HOSES, HEADER LIFT ........

HYDRAULIC LINES AND HOSES, L.H., FOUR WH EEL DRIVE ..................................................................

HYDRAULIC LINES AND HOSES, REEL FORE-AND-AFT, FRONT ............................................

HYDRAULIC LINES AND HOSES, REEL DRIVE L.H. SIDE ......................................................................

HYDRAULIC LINES AND HOSES, REEL DRIVE, FRONT ..........................................................................

HYDRAULIC LINES AND HOSES, REEL PUMP............

HYDRAULIC LINES, FOUR WHEEL DRIVE CASE DRAIN ..........................................................................

HYDRAULIC LINES, REEL FORE-AND-AFT, L.H. SIDE ..............................................................................

HYDRAULIC MOUNTING, UNLOADING AUGER SWING ..........................................................................

HYDRAULIC PRESSURE LINES AND HOSES ..............

HYDRAULIC PUMP CONNECTING HARDWARE, HYDROSTATIC DRIVE PUMP ....................................

HYDRAULIC PUMP, MAIN ..............................................

HYDRAULIC RETURN LINES ..........................................

HYDRAULIC STEERING HOSES, UPPER AND ATTENUATOR ..............................................................

HYDRAULIC UPPER RETURN LINES AND HOSES, RESERVOIR ................................................................

HYDRAULIC/HYDROSTATIC OIL RESERVOIR AND MOUNTINGS ......................................................

HYDROSTATIC DRIVE CHARGE PUMP ........................

HYDROSTATIC DRIVE CHARGE PUMP (RING AND PINION) ....................................................

CTS II COMBINE PC2752

PAGE 121 - 76 121 - 78 125 - 46 120 - 40 120 - 42 24 - 46 50 - 13 50 - 23 130 - 48 130 - 50 130 - 52 50 - 32 24 - 28 24 - 14 60 - 38 60 - 39 125 - 38 24 - 34 130 - 44 20 - 6 24 - 49 24 - 15 70 - 36 70 - 82 70 - 10 70 - 32 70 - 48 70 - 30 50 - 70 70 - 26 70 - 4 70 - 20 70 - 22 50 - 75 70 - 28 70 - 68 70 - 46 50 - 78 70 - 60 70 - 42 60 - 18 70 - 44 70 - 37 50 - 35 50 - 36 (30-MAY-00) PN=18

1A20 CTS II COMBINE ALPHABETICAL INDEX - CONTINUED GRID 2B10 2C17 2D19 2B8 2C19 2E5 2C21 2D17 2D13 2D15 2C14 2C11 2C9 2C12 2C22 2D21

HYDROSTATIC DRIVE CONTROL CABLE ....................

HYDROSTATIC DRIVE DISPLACEMENT CONTROL VALVE ..........................................................................

HYDROSTATIC DRIVE HOSES, UPPER (FOUR WHEEL DRIVE) ..............................................

HYDROSTATIC DRIVE LEVER, CABLE AND SWITC H....................................................................................

HYDROSTATIC DRIVE MOTOR ......................................

HYDROSTATIC DRIVE MOTOR ......................................

HYDROSTATIC DRIVE MOTOR KIT ..............................

HYDROSTATIC DRIVE OIL LINES AND HOSES, LOWER (FOUR WHEEL DRIVE) ................................

HYDROSTATIC DRIVE OIL LINES AND HOSES, LOWER (TWO WHEEL DRIVE) ..................................

HYDROSTATIC DRIVE OIL LINES AND HOSES, LOWER (TWO WHEEL DRIVE) ..................................

HYDROSTATIC DRIVE PISTON ......................................

HYDROSTATIC DRIVE PUMP COVER ..........................

HYDROSTATIC DRIVE PUMP, FRONT COVER AND SHAFT ..........................................................................

HYDROSTATIC DRIVE PUMP, HOUSING, SWASHPLATE, AND SERVO CYLINDERS ................

HYDROSTATIC MOTOR VALVE ....................................

HYDROSTATIC OIL COOLER LINES AND HOSES ......

PAGE 50 - 4

GRID

50 - 38

1C8 4H25 4K9 1C14 4J1

50 - 66 50 - 2 50 - 40 50 - 76 50 - 42 50 - 64 50 - 60 50 - 62 50 - 34 50 - 30 50 - 28 50 - 32 50 - 43 50 - 68

I 5C1 1B10 1E13 3I10 4C11 4C5 4C1 4C3 4B24 1D22 1D22 1D22 1H21 2D1 2B22 1C21 1F19 3E21 1D14 1D14 3I22 1F1 1C21 1D1 1B14 3D23 4G7 4G9

IDLER AND DRIVE TIGHTENER, CLEAN GRAIN ELEVATOR ..................................................................

IDLER ARM, ENGINE FAN ..............................................

IDLER PULLEY, AIR CONDITIONER COMPRESSOR ..

IDLER SHAFT, DRUM AND CHAIN, FEEDER CONVEYOR ..................................................................

IDLER, BEATER DRIVE BELT ........................................

IDLER, STRIPPER BEATER DRIVE................................

INDICATOR, CABLE AND BRACKETS, CONCAVE ......

INDICATOR, CONCAVE, CORN AND SMALL GRAIN ..

INDICATOR, SPIKE TOOTH ............................................

INJECTION PUMP GEAR ................................................

INJECTION PUMP LUBE LINE ........................................

INJECTION PUMP, ELECTRONIC FUEL ........................

INLET AIR TEMPERATURE SWITCH ............................

INNER COVER..................................................................

INPUT SHAFT, TRANSMISSION ....................................

INSERTS, VALVE SEAT ..................................................

INSTRUMENT PANEL, CAB POST ................................

INSTRUMENT PANEL, CAB POST ................................

INTAKE MANIFOLD ..........................................................

INTAKE MANIFOLD GASKET ..........................................

INTAKE SHIELD................................................................

INTAKE TUBES AND AIR CLEANER..............................

INTAKE VALVES ..............................................................

INTAKE, ENGINE OIL PUMP ..........................................

INTERCOOLER ................................................................

INTERIOR TRIM PANELS, CAB ......................................

INTERMEDIATE SHAFT MOUNTING, CYLINDER DRIVE, DUAL-RANGE..................................................

INTERMEDIATE SHEAVE, CYLINDER DRIVE, DUAL-RANGE ..............................................................

130 - 22 20 - 6 24 - 60 110 - 32 120 - 30 120 - 24 120 - 20 120 - 22 120 - 18 24 - 44 24 - 44 24 - 44 40 - 58 50 - 48 50 - 16 24 - 18 40 - 6 90 - 30 24 - 36 24 - 36 110 - 44 30 - 8 24 - 18 24 - 23 20 - 10 90 - 8 121 - 42 121 - 44

J 1C6

JETS, PISTON COOLING ................................................

CTS II COMBINE PC2752

(30-MAY-00)

24 - 2

PAGE

K

3F15 3F17 3F19 3F21 3H1 3G21 1J17 1E7 1J1 1J3 1C11 1E7 4D9 1C21 2J21 2C21 3I5 4H25 4K9 1C13 4I25 2F20 1J5 1D10 1C15 1E17 4H17 4H19 4I21

KEY ENGINE SERVICE PARTS ......................................

KEY STOCK, METRIC KIT ..............................................

KEY STOCK, METRIC KIT ..............................................

KEY, DAMPER ..................................................................

KIT, ADJUSTING SCREW, REEL DRIVE FLOW CONTROL VALVE........................................................

KIT, AIR SUSPENSION SEAT ........................................

KIT, AIR SUSPENSION SEAT ........................................

KIT, AIR SUSPENSION SEAT ........................................

KIT, AIR SUSPENSION SEAT ........................................

KIT, CAB HARDWARE ....................................................

KIT, COMPRESSOR HARDWARE R134A ......................

KIT, CONVENIENCE OUTLET ........................................

KIT, CYLINDER HEAD ....................................................

KIT, ELECTRICAL CONNECTOR SERVICE ..................

KIT, ELECTRICAL CONNECTOR SERVICE ..................

KIT, ENGINE OVERHAUL ................................................

KIT, ENGINE REBUILD ....................................................

KIT, GRAIN LEAK ............................................................

KIT, HEAD BOLT ..............................................................

KIT, HYDRAULIC FLAT O-RING......................................

KIT, HYDROSTATIC DRIVE MOTOR ..............................

KIT, LOCKOUT ADAPTER - CONTOUR MASTER (BELT PU & 4R CORN HEADS) ................................

KIT, METRIC KEY STOCK ..............................................

KIT, METRIC KEY STOCK ..............................................

KIT, PISTON/LINER ..........................................................

KIT, SEAL REPAIR, REEL DRIVE FLOW CONTROL VALVE........................................................

KIT, STEERING CYLINDER ............................................

KIT, TERMINAL AND WIRING ........................................

KIT, WATER PUMP SEAL................................................

KIT,UNDERSIZE CRANKSHAFT (CONNECTING ROD JOURNAL) ................................

KIT,UNDERSIZED MAIN BEARING CRANKSHAFT ..............................................................

KNIFEBANK AND HOUSING, STRAW CHOPPER ........

KNIFEBANK AND HOUSING, STRAW CHOPPER ........

KNOB, CONTROL, CHECK VALVE AND ROD, CHAFF SPREADER ....................................................

24 - 4 121 - 84 125 - 60 24 - 11 125 - 25 90 - 48 90 - 50 90 - 52 90 - 54 90 - 84 90 - 80 40 - 102 24 - 54 40 - 86 40 - 88 24 - 8 24 - 54 120 - 54 24 - 18 70 - 82 50 - 42 110 - 26 121 - 84 125 - 60 24 - 10 125 - 24 60 - 33 40 - 90 24 - 32 24 - 12 24 - 64 121 - 76 121 - 78 125 - 20

L 1G22 1G24 1H5 3D3 1H1 3C22 2F13 3E9 3B23 3C1 1K2 1K1 1J13 1J25 3B23 3E17 3E15 3C1 3I14 3E1

L H MAIN WIRING HARNESS, L H FRONT .................. 40 - 34 L H MAIN WIRING HARNESS, L H FRONT .................. 40 - 36 L.H. AND R.H. MAIN WIRING HARNESS, REAR .......... 40 - 42 L.H. FRONT CORNER SHEET AND DOOR .................. 80 - 48 L.H. MAIN WIRING HARNESS, L.H. CENTER .............. 40 - 38 L.H. SERVICE ACCESS SHIELD .................................... 80 - 42 L.H. STEERING LINES .................................................... 60 - 26 LADDER AND HANDRAIL, OPERATOR’S PLATFORM 90 - 18 LADDER AND LANDING, REAR...................................... 80 - 18 LADDER LANDING LATCH ARM, REAR ........................ 80 - 20 LAMP ASSEMBLY, REAR L.H. SIDE .............................. 40 - 112 LAMP ASSEMBLY, REAR R.H. SIDE.............................. 40 - 111 LAMP, INSTALLATION .................................................... 40 - 98 LAMPS, LICENSE PLATE (EXPORT) .................................................................... 40 - 110 LANDING AND LADDER, REAR...................................... 80 - 18 LANDING AND MIRROR, CAB (R.H.) ............................ 90 - 26 LANDING AND MIRROR, CAB, L.H. .............................. 90 - 24 LANDING LATCH ARM, REAR LADDER ........................ 80 - 20 LATCH HANDLE, FEED PLATE ...................................... 110 - 36 LATCH, CAB DOOR ........................................................ 90 - 10

10-19 PN=19