John Deere 9501 PULL-TYPE COMBINE WITH BELT PICKUP AND PICKUP PLATFORM Parts Catalog Manual（PC2310）

1A2 9501 PULL-TYPE COMBINE

H41820

-UN-01JAN94

JOHN DEERE 9501 PULL-TYPE COMBINE WITH BELT PICKUP AND PICKUP PLATFORM (635401-645700)

(SPECIFICATIONS AND DESIGN SUBJECT TO CHANGE WITHOUT NOTICE)

9501 PULL-TYPE COMBINE PC2310

(01-DEC-94)

10-1

PN=1

1A3 9501 PULL-TYPE COMBINE

NOTE FOR THREE-ROLLER BELT PICKUP PARTS INFORMATION, REFER TO JOHN DEERE THREE-ROLLER BELT PICKUP PARTS CATALOG - PC-1189.

IMPORTANT THIS PARTS CATALOG CONTAINS INFORMATION FOR THE 9501 PULL-TYPE COMBINE. VINTAGE IS DETERMINED

BY THE COMBINE SERIAL NUMBER OF THE PRODUCT IDENTIFICATION NUMBER (PIN).

IT IS IMPORTANT THAT THE CORRECT NUMBERS BE USED WHEN ORDERING PARTS.

PRODUCT INFORMATION NUMBER (PIN) PLATE THE PRODUCT INFORMATION PLATE (PIN) IS LOCATED IS LOCATED ON LEFT-HAND SIDE ABOVE REAR AXLE. AN EXAMPLE OF THE TWO-LINES ON THIS PIN PLATE IS: HO9501X635401 COMBINE (FIRST LINE) HO - MANUFACTURING UNIT (HARVESTER WORKS) 9501 - MODEL IDENTIFIER X - CONFIGURATION CODE/MODEL IDENTIFIER SUFFIX 635401 - SEQUENTIAL NUMBER USED IN SERIAL NO. COLUMN (SECOND LINE) COMBINE - TYPE OF PRODUCT

PARTS LISTING INFORMATION SERIAL NUMBER OR PRODUCT IDENTIFICATION NUMBER (PIN) INFORMATION SHOWS ON WHICH MACHINES PART MAY BE USED; FOR EXAMPLE: THE PART CAN BE USED ON ALL MACHINES. -000000 THE PART CAN BE USED ON ALL MACHINES UP TO AND INCLUDING THE SERIAL NUMBER LISTED. 000000THE PART CAN BE USE ON ALL MACHINES BEGINNING WITH THE SERIAL NUMBER LISTED. 000000-000000 THE PART CAN BE USED ON ALL MACHINES BETWEEN AND INCLUDING SERIAL NUMBERS LISTED.

10-2

9501 PULL-TYPE COMBINE PC2310

(01-DEC-94) PN=2

1A4 9501 PULL-TYPE COMBINE

DIRECTION ARROW ARROWS ARE USED WITH ILLUSTRATIONS TO INDICATE THE FRONT OF THE UNIT. "RIGHT-HAND" AND "LEFTHAND" SIDES ARE DETERMINED BY FACING IN THE DIRECTION OF MACHINE FORWARD TRAVEL.

BOX-ENCLOSED ILLUSTRATIONS A KEY NUMBER, SHOWN IN THE PARTS LIST, IS ASSIGNED TO A BOX ENCLOSING ALL PARTS SOLD AS A SERVICE ASSEMBLY. A BOX NOT KEYED INCLUDES NON-CURRENT PARTS.

KITS KIT INFORMATION WILL BE FOUND IMMEDIATELY FOLLOWING THE STORY IN WHICH IT IS USED.THE ILLUSTRATION IS REPEATED WITH ONLY THE KIT PARTS CALLED OUTAND WITH ALL OTH ER PARTS SHOWN IN PHANTOM.

JDM REMANUFACTURED COMPONENTS THE SERVICE PARTS LISTED IN THIS CATALOG ARE INTENDED FOR THE REPAIR OF ORIGINAL EQUIPMENT COMPONENTS. ALTHOUGH MOST SERVICE PARTS MAY BE USED TO REPAIR REMANUFACTURED COMPONENTS, THE REMANUFACTURED DESIGN MAY CHANGE PARTS SUFFICIENTLY SO THATSERVICE PARTS ARE INADEQUATE OR NOT USABLE.

BOLT AND CAP SCREW STRENGTH IDENTIFICATION BOLTS AND CAP SCREWS REQUIRED TO HAVE HIGH-STRENGTH QUALITIES EQUIVALENT TO SAE GRADE 8 ARE IDENTIFIED THROUGHOUT THIS CATALOG BY THE DESCRIPTION HS SAE 8. ALL STANDARD BOLTS AND CAP SCREWS ARE SAE GRADE 5 OR LOWER. BOLTS AND CAP SCREWS REQUIRED TO HAVE HIGH-STRENGTH QUALITIES EQUIVALENT TO PROPERTY CLASS 10.9 ARE IDENTIFIED THROUGHOUT THIS CATALOG BY THE DESCRIPTION HS 10.9. ALL STANDARD BOLTS AND CAP SCREWS ARE PROPERTY CLASS 8.8 OR LOWER.

SI UNITS OF MEASURE METRIC DIMENSIONS ARE GIVEN, WHERE APPLICABLE, THROUGHOUT THIS PARTS CATALOG.

TRADEMARKS THROUGHOUT THIS PARTS CATALOG, YOU WILL FIND THE FOLLOWING DEERE & COMPANY TRADEMARKS: DIAL-A-SPEED™ DIAL-A-MATIC™ HARVESTRAK™

POSI-TORQ™ TORQ-GARD SUPREME® QUIK-TATCH™

CHANGE INDICATOR LINE CHANGES AFFECTING THE ORDERING OF PARTS ARE IDENTIFIED BY VERTICAL LINES MARKED IN THE LEFT-HAND MARGIN OF REVISED PARTS LISTING IMAGES. A LINE IS ALSO AT THE LEFT-HAND EDGE OF THE SAME PART NUMBER IN THE NUMERICAL INDEX TO SHOW THE LOCATION OF REVISED INFORMATION.

FUNCTION CODE

(EXAMPLE - FC: 5000)

FUNCTION CODES ARE LOCATED ON EACH PAGE IN THE UPPER RIGHT-HAND CORNER ON THE TITLE LINE. THE CODE LISTED IS A GROUPING CODE THAT CAN BE USED FOR WARRANTIES AND FOR DTAC TO IDENTIFY CERTAIN AREAS.

COMPLETE GOODS LISTINGS COMPLETE GOODS ARE IN BOLD FACE TYPE. ORDER SEPARATELY. DO NOT INCLUDE ON REPLACEMENT PARTS ORDER.

9501 PULL-TYPE COMBINE PC2310

(01-DEC-94)

10-3

PN=3

1A5 9501 PULL-TYPE COMBINE

SECTIONAL INDEX SECTION GENERAL INFORMATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 ELECTRICAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 POWER TRAIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 HYDRAULICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 SEPARATOR SHELL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 HEADERS - REFER TO INDIVIDUAL HEADER PARTS CATALOGS. . . . . . . 100 FEEDER HOUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 SEPARATOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 CLEAN GRAIN ELEVATOR, GRAIN TANK AND UNLOADING AUGER . . . . . 130 HEADER HEIGHT CONTROL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 DECALS, BELTS AND CHAINS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170 NUMERICAL INDEX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180

10-4

9501 PULL-TYPE COMBINE PC2310

(01-DEC-94) PN=4

Thanks very much for your reading, Want to get more information, Please click here, Then get the complete manual

NOTE: If there is no response to click on the link above, please download the PDF document first, and then click on it.

Have any questions please write to me: admin@servicemanualperfect.com

1A6 9501 PULL-TYPE COMBINE ALPHABETICAL INDEX GRID

PAGE

A 1F23 1E6 1E6 1I9 1E16 2D19 1C3 1C1 2D11 1E24 1F2 1E20 2J20 1G9 2H13 2H13 2J13 2I7 1E23 2J7 2H1 1F11 2J3 2J14 2I9 2G23 2K11 2H13 2J18 2B15 2B17

ACCESS DOOR ....................................................................

ACCUMULATOR, SINGLE ....................................................

ACCUMULATOR, SINGLE MOUNTING BRACKET ............

ACTUATOR, REVERSER......................................................

ADJUSTABLE STOP KIT, HEADER LIFT MODULE, SOLENOID CONTROL VALVES ......................................

ADJUSTING BRACKET, CYLINDER DRIVE, DUAL-RANGE ..................................................................

ADJUSTING MOTOR, CONCAVE ........................................

ADJUSTING MOTOR, SEPARATOR FAN DRIVE ..............

ARM, LOCKOUT, DUAL-RANGE..........................................

ARMATURE KIT, SOLENOID CONTROL VALVE DOUBLE PILOTED MODULE, AUGER SWING..............

ARMATURE KIT, SOLENOID CONTROL VALVE DOUBLE PILOTED MODULE, GRAIN TANK UN. ..........

ARMATURE KIT, SOLENOID CONTROL VALVE, CYLINDER SPEED ..........................................................

AUGER COVERS AND CHANNEL, CROSS ......................

AUGER DRIVE MUD SHIELDS (R-H SIDE) ........................

AUGER DRIVE SHIELD, UPPER TAILINGS ......................

AUGER DRIVE, UPPER TAILINGS......................................

AUGER HOUSING, HORIZONTAL UNLOADING (14- AND 17-FT.) ..............................................................

AUGER HOUSING, LOADING, UPPER CLEAN GRAIN................................................................................

AUGER SWING, SOLENOID CONTROL VALVE DOUBLE PILOTED ..........................................................

AUGER SWIVEL SUPPORT AND BRACES........................

AUGER TROUGH, LOWER TAILINGS ................................

AUGER ULOADING ENAGAGE SYSTEM ..........................

AUGER, GRAIN TANK, VERTICAL UNLOADING ..............

AUGER, HORIZONTAL UNLOADING (14- AND 17-FT.) ..............................................................

AUGER, LOADING, CLEAN GRAIN ....................................

AUGER, LOWER TAILINGS ................................................

AUGER, LOWER TAILINGS, BELTS ..................................

AUGER, UPPER TAILINGS ..................................................

AUGERS, GRAIN TANK CROSS ........................................

AUGERS, SHOE GRAIN SUPPLY AND HOUSING ............

AUGERS, SHOE GRAIN SUPPLY AND HOUSING ............

80 - 4 70 - 20 70 - 20 110 - 28 70 - 32 120 - 76 40 - 40 40 - 38 120 - 68 70 - 40 70 - 43 70 - 36 130 - 50 80 - 14 120 - 168 120 - 168 130 - 43 130 - 12 70 - 39 130 - 36 120 - 154 70 - 54 130 - 32 130 - 44 130 - 14 120 - 152 170 - 5 120 - 168 130 - 48 120 - 24 120 - 26

B 2I21 2H5 2K10 2B13 2E5 2B11 2J23 2E17 1F17 2B11 2K10 2K11 2K11 2K11 2K9 2K9 2K9 2K10 2K11 2K9

BASE, GRAIN TANK ............................................................

BEARINGS, TAILINGS ELEVATOR CONVEYOR................

BEATER BELTS SHEAVES ..................................................

BEATER COVER ..................................................................

BEATER DRIVE SHEAVES AND TIGHTENER ..................

BEATER SHAFT AND DRIVE BELT ....................................

BELT GUIDE, UNLOADING AUGER DRIVE ......................

BELT PICKUP / REEL DRIVE, PUMP MOUNTING SHEAVE ............................................................................

BELT TIGHTENING CYLINDER ..........................................

BELT, DRIVE, SHAFT AND BEATER ..................................

BELTS, BEATER ..................................................................

BELTS, CLEAN GRAIN ELEVATOR ....................................

BELTS, CYLINDER DRIVE ..................................................

BELTS, DRIVE, CYLINDER INTERMEDIATE......................

BELTS, FAN, CLEANING......................................................

BELTS, FEEDER HOUSE ....................................................

BELTS, HEADER AND REEL ..............................................

BELTS, LOWER TAILINGS AUGER ....................................

BELTS, LOWER TAINLINGS AUGER..................................

BELTS, STRAW CHOPPER..................................................

9501 PULL-TYPE COMBINE PC2310

(01-DEC-94)

130 - 26 120 - 158 170 - 4 120 - 22 120 - 86 120 - 20 130 - 54 120 - 98 70 - 60 120 - 20 170 - 4 170 - 5 170 - 5 170 - 5 170 - 3 170 - 3 170 - 3 170 - 4 170 - 5 170 - 3

GRID 2K9 2K9 2K10 2K10 1E19 1C5 2H24 1A22 1A18 1H5 1I1 1E6 1B8 2B9 1B14 1B1 1B3 1F6 1A16

BELTS, STRAW SPREADER ..............................................

BELTS, UNLOADING AUGERS............................................

BELTS, UNLOADING SYSTEM ............................................

BELTS, UPPER TAILINGS AUGER ....................................

BI-DIRECTIONAL MODULE, SOLENOID CONTROL VALVE, CYLINDER SPEED ............................................

BOARDS, ELECTRONIC ......................................................

BOOT, CLEAN GRAIN LOWER ELEVATOR ......................

BOX, CONTROL, HARDWARE KIT ....................................

BOX, MAIN CONTROL..........................................................

BOX, TOOL............................................................................

BRACKET, FEEDER CONVEYOR........................................

BRACKET, SINGLE ACCUMULATOR MOUNTING ............

BRACKET, STRAW CHOPPER SENSOR ..........................

BRACKETS, CONCAVE INDICATOR ..................................

BRACKETS, LOW SHAFT SPEED MONITORS..................

BRACKETS, MAIN HITCH HARNESS ................................

BRACKETS, MAIN HITCH HARNESS ................................

BRACKETS, SOLENOID CONTROL VALVE ......................

BRKT., MTG., CONTROL BOX, DIAL-A-MATIC ..................

PAGE 170 - 3 170 - 3 170 - 4 170 - 4 70 - 35 40 - 42 130 - 4 40 - 8 40 - 4 80 - 36 110 - 20 70 - 20 40 - 20 120 - 18 40 - 26 40 - 12 40 - 14 70 - 48 40 - 2

C 1C13 1C25 2J1 2G11 2G1 2G3 2G13 2G7 2G5 2G15 2G17 2G19 2G21 2C3 2C5 2C7 2C1 2B23 2H12 2I1 1I1 2H5 2J20 2J3 2G9 2E23 2I1 2I13 2I13 2I13 2I11 2I15 2I17 2I5 2I5 2I5

CABLE, WIRING....................................................................

CASE, GEAR ........................................................................

CASE, VERTICAL AUGER LOWER GEAR ........................

CHAFF SPREADER CONTROL, ROD AND KNOB ............

CHAFF SPREADER DISC AND DRIVE BELT ....................

CHAFF SPREADER FRAME, SHIELDS AND HANDLES ................................................................

CHAFF SPREADER LINES AND FITTINGS........................

CHAFF SPREADER MOUNTING SUPPORT ......................

CHAFF SPREADER PAN AND SEALS................................

CHAFF SPREADER, HOSES, LINES AND MOTOR ..........

CHAFF SPREADER, MOTOR ..............................................

CHAFF SPREADER, PUMP..................................................

CHAFF SPREADER, PUMP SEAL KIT................................

CHAFFER ELEMENT ............................................................

CHAFFER EXTENSION ELEMENT......................................

CHAFFER FRAME ................................................................

CHAFFER FRAME, PRE-CLEANER ....................................

CHAFFER, PRE-CLEANING ................................................

CHAIN TIGHTENER, UPPER TAILINGS DRIVE ................

CHAIN, CONVEYOR, CLEAN GRAIN LOWER ELEVATOR........................................................................

CHAIN, FEEDER CONVEYOR DRIVE ................................

CHAIN, TAILINGS ELEVATOR CONVEYOR ......................

CHANNEL, CROSS AUGER ................................................

CHARGE HOUSING, VERTICAL UNLOADING AUGER ....

CHOPPER DRIVE IDLER ....................................................

CHOPPER DRIVE SHIELDS, STRAW ( -640400) ..................................................................

CLEAN GRAIN CONVEYOR CHAIN ....................................

CLEAN GRAIN ELEVATOR DRIVE IDLER..........................

CLEAN GRAIN ELEVATOR DRIVE TIGHTENER................

CLEAN GRAIN ELEVATOR DRIVE TIGHTENER AND IDLER ................................................................................

CLEAN GRAIN ELEVATOR GEARCASE ............................

CLEAN GRAIN ELEVATOR SHIELDS, UPPER ( -640400) ..................................................................

CLEAN GRAIN ELEVATOR SHIELDS, UPPER (640401) ..................................................................

CLEAN GRAIN ELEVATOR UPPER SHAFT ......................

CLEAN GRAIN ELEVATOR UPPER SHAFT, SPROCKET AND SHEAVE ..............................................

CLEAN GRAIN ELEVATOR UPPER SHEAVE ....................

40 - 50 50 - 9 130 - 30 120 - 140 120 - 130 120 - 132 120 - 142 120 - 136 120 - 134 120 - 144 120 - 146 120 - 148 120 - 150 120 - 36 120 - 38 120 - 40 120 - 34 120 - 32 120 - 166 130 - 6 110 - 20 120 - 158 130 - 50 130 - 32 120 - 138 120 - 104 130 - 6 130 - 18 130 - 18 130 - 18 130 - 16 130 - 20 130 - 22 130 - 10 130 - 10 130 - 10

10-5

PN=5

1A7 9501 PULL-TYPE COMBINE ALPHABETICAL INDEX - CONTINUED GRID 2I5 2I3 2I9 2I7 2H22 2H22 2H24 2I1 2I1 2H24 2E7 2B19 2B21 2B19 2B21 2A18 1H13 2D3 1I7 1C3 2B9 2B5 2B7 1C7 1C15 1A22 1A16 1A16 1A18 1A20 2A18 2E3 2I1 2F17 1G20 1G22 2D21 2J21 2B13 2A20 2J20 2C21 2J16 2J20 2J18 1F21 2C23 2D1 2A20 2A24 2D19 2D9 2D15 2D17 1E22 2D13 2D7 2B1

10-6

CLEAN GRAIN ELEVATOR UPPER SPROCKET ..............

CLEAN GRAIN ELEVATOR, UPPER ..................................

CLEAN GRAIN LOADING AUGER ......................................

CLEAN GRAIN LOADING AUGER HOUSING, UPPER......

CLEAN GRAIN LOWER AUGER..........................................

CLEAN GRAIN LOWER AUGER AND HINGED DOOR ....

CLEAN GRAIN LOWER ELEVATOR....................................

CLEAN GRAIN LOWER ELEVATOR....................................

CLEAN GRAIN LOWER ELEVATOR AND CONVEYOR CHAIN................................................................................

CLEAN GRAIN LOWER ELEVATOR BOOT AND DOOR ..

CLEANING FAN DRIVE, SEPARATOR................................

CLEANING FAN INTAKE SHIELDS ....................................

CLEANING FAN INTAKE SHIELDS ....................................

CLEANING FANS AND SHROUDS......................................

CLEANING FANS AND SHROUDS......................................

CLEANOUT DOOR, CONVEYOR AUGER, HANDLE AND LATCHES ................................................................

CLEANOUT DOORS, FEEDER HOUSE ..............................

CLUTCH, HEADER ELECTOMAGNETIC ............................

CLUTCH, SLIP, FEEDER HOUSE ......................................

CONCAVE ADJUSTING MOTOR ........................................

CONCAVE INDICATOR, BRACKETS ..................................

CONCAVE, RASP BAR AND GRATE..................................

CONCAVE, RASP BAR AND GRATE..................................

CONNECTORS, ELECTRICAL, WEATHERPACK ..............

CONNECTORS, SUPPLEMENTARY TERMINALS..............

CONTROL BOX HARDWARE KIT........................................

CONTROL BOX HOUSING, DIAL-A-MATIC ........................

CONTROL BOX WIRING HARNESS, DIAL-A-MATIC ........

CONTROL BOX, MAIN..........................................................

CONTROL BOX, MAIN, HARVESTRAK ..............................

CONVEYOR AUGER CLEANOUT DOOR, HANDLE AND LATCHES ..........................................................................

CONVEYOR AUGERS, STRAW WALKER, SIEVE AND CHAFFER DRIVE..............................................................

CONVEYOR CHAIN, CLEAN GRAIN ..................................

CORN CURTAIN AND DEFLECTORS ................................

CORNER SHEET, R H FRONT............................................

CORNER SHEET, REAR, L H..............................................

COUNTERSHAFT DRIVE, SECONDARY ............................

COUNTERSHAFT DRIVE, UNLOADING AUGER................

COVER, BEATER..................................................................

COVER, THRESHING CYLINDER........................................

COVERS AND CHANNEL, CROSS AUGER ......................

CRANKS, STRAW WALKER, STRAW SPREADER DRIVE AND SHIELD ........................................................

CROSS AUGER BEARING PLATE, L.H. ............................

CROSS AUGER COVERS AND CHANNEL ........................

CROSS AUGERS, GRAIN TANK ........................................

CROSS BRACES, SEPARATOR..........................................

CURTAIN, SEPARATOR ......................................................

CURTAIN, SEPARATOR ......................................................

CYLINDER COVER, THRESHING........................................

CYLINDER DOOR ................................................................

CYLINDER DRIVE ADJUSTING BRACKET, DUAL-RANGE ..................................................................

CYLINDER DRIVE GEAR CASE, DUAL-RANGE ................

CYLINDER DRIVE INTERMEDIATE SHAFT MOUNTING, DUAL-RANGE ............................................

CYLINDER DRIVE INTERMEDIATE SHEAVE, DUAL-RANGE ..................................................................

CYLINDER DRIVE SOLENOID CONTROL VALVE RELIEF KIT ......................................

CYLINDER DRIVE TIGHTENER, DUAL-RANGE ................

CYLINDER DRIVE, SINGLE RANGE ..................................

CYLINDER SHEAR BAR ......................................................

PAGE 130 - 10 130 - 8 130 - 14 130 - 12 130 - 2 130 - 2 130 - 4 130 - 6 130 - 6 130 - 4 120 - 88 120 - 28 120 - 30 120 - 28 120 - 30 120 - 2 110 - 8 120 - 60 110 - 26 40 - 40 120 - 18 120 - 14 120 - 16 40 - 44 40 - 52 40 - 8 40 - 2 40 - 2 40 - 4 40 - 6 120 - 2 120 - 84 130 - 6 120 - 122 80 - 26 80 - 28 120 - 78 130 - 52 120 - 22 120 - 4 130 - 50 120 - 54 130 - 46 130 - 50 130 - 48 80 - 2 120 - 56 120 - 58 120 - 4 120 - 8 120 - 76 120 - 66 120 - 72 120 - 74 70 - 38 120 - 70 120 - 64 120 - 10

GRID 1E11 1E20 1E21 1E19 1E4 1F18 1F17 1F9 2B3 1F13

PAGE CYLINDER SPEED HYDRAULIC LINES AND HOSES ...... 70 - 26 CYLINDER SPEED SOLENOID CONTROL VALVE ARMATURE KIT................................ 70 - 36 CYLINDER SPEED SOLENOID CONTROL VALVE POPPET KIT .................................... 70 - 37 CYLINDER SPEED, SOLENOID CONTROL VALVE ............................................................ 70 - 35 CYLINDER, HEADER LIFT, HYDRAULIC ............................ 70 - 18 CYLINDER, HITCH TUBE HYDRAULIC .............................. 70 - 61 CYLINDER, HYDRAULIC BELT TIGHTENING .................... 70 - 60 CYLINDER, HYDRAULIC, UNLOADING AUGER SWING, LINES AND HOSES .......................................... 70 - 52 CYLINDER, THRESHING, RASP BAR ................................ 120 - 12 CYLINDER, UNLOADING AUGER SWING HYDRAULIC ...................................................................... 70 - 56

D 2K15 2K13 2K15 2K12 2F3 2F17 2K5 2G1 1F23 2F19 2H22 2H24 1G24 2A24 1G16 2F19 1G18 1E23 1F1 1C17 2G1 2J23 2H6 2H12 2E1 2I13 1G12 1H11 2E23 2F1 2I13 2E15 1H9 2E17 2E7 2J21 2K11 2K11 2E13 2D23 1D1 1D5

DECALS, FRONT ..................................................................

DECALS, LEFT-HAND ..........................................................

DECALS, REAR ....................................................................

DECALS, RIGHT-HAND ........................................................

DECK, SUPPORTS AND FINS, STRAW CHOPPER ..........

DEFLECTORS AND CORN CURTAIN ................................

DIAL-A-MATIC ELECTRICAL HARNESS ............................

DISC AND DRIVE BELT, CHAFF SPREADER....................

DOOR, ACCESS ..................................................................

DOOR, CHOPPER STRAW ..................................................

DOOR, CLEAN GRAIN LOWER AUGER ............................

DOOR, CLEAN GRAIN LOWER ELEVATOR ......................

DOOR, CORNER SHEET, LEFT - HAND FRONT ..............

DOOR, CYLINDER ................................................................

DOOR, L.H. GULL WING......................................................

DOOR, STRAW CHOPPER ..................................................

DOORS, R.H. GULL WING ..................................................

DOUBLE PILOTED, AUGER SWING, SOLENOID CONTROL VALVE ............................................................

DOUBLE PILOTED, GRAIN TANK UNLOADING, SOLENOID CONTROL VALVE ........................................

DRAWBAR EXTENSION ......................................................

DRIVE BELT AND DISC, CHAFF SPREADER....................

DRIVE BELT GUIDE, UNLOADING AUGER ......................

DRIVE BRACKET, TAILINGS ..............................................

DRIVE CHAIN TIGHTENER, UPPER TAILINGS ................

DRIVE GEARCASE, STRAW WALKER ..............................

DRIVE IDLER, CLEAN GRAIN ELEVATOR ........................

DRIVE SHIELD, R.H. REAR ................................................

DRIVE SHIELDS, SAFETY STOP, FEEDER HOUSE ........

DRIVE SHIELDS, STRAW CHOPPER ( -640400) ..................................................................

DRIVE SHIELDS, STRAW CHOPPER (640401) ..................................................................

DRIVE TIGHTENER, CLEAN GRAIN ELEVATOR ..............

DRIVE TIGHTENER, FEEDER HOUSE ..............................

DRIVE TIGHTENER, FIXED SPEED FEEDER HOUSE ..............................................................................

DRIVE, BELT PICKUP / REEL PUMP MOUNTING SHEAVE ......................................................

DRIVE, CLEANING FAN, SEPARATOR ..............................

DRIVE, COUNTERSHAFT, UNLOADING AUGER ..............

DRIVE, CYLINDER INTERMEDIATE, BELTS......................

DRIVE, CYLINDER, BELTS ..................................................

DRIVE, FAN, SPEED CONTROL SHEAVE LINKAGE ........

DRIVE, GEARCASE, STRAW WALKER ..............................

DRIVE, LOWER IDLER ........................................................

DRIVE, MAIN, IDLER ............................................................

9501 PULL-TYPE COMBINE PC2310

170 - 10 170 - 8 170 - 10 170 - 7 120 - 108 120 - 122 160 - 4 120 - 130 80 - 4 120 - 124 130 - 2 130 - 4 80 - 30 120 - 8 80 - 22 120 - 124 80 - 24 70 - 39 70 - 42 50 - 1 120 - 130 130 - 54 120 - 159 120 - 166 120 - 82 130 - 18 80 - 18 110 - 6 120 - 104 120 - 106 130 - 18 120 - 96 110 - 4 120 - 98 120 - 88 130 - 52 170 - 5 170 - 5 120 - 94 120 - 80 50 - 10 50 - 14

(01-DEC-94) PN=6

1A8 9501 PULL-TYPE COMBINE ALPHABETICAL INDEX - CONTINUED GRID 1D20 2D21 2E19 2E21 1B20 1B20 2D19 2D9 2D15 2D17 2D13 2D11

DRIVE, REEL, FLOW CONTROL VALVE............................

DRIVE, SECONDARY COUNTERSHAFT ............................

DRIVES, STRAW CHOPPER (FRONT) ..............................

DRIVES, STRAW CHOPPER (REAR)..................................

DUAL LEVEL MONITOR ......................................................

DUAL LEVEL MONITOR WIRING HARNESS ....................

DUAL-RANGE CYLINDER DRIVE ADJUSTING BRACKET ..........................................................................

DUAL-RANGE CYLINDER DRIVE GEAR CASE ................

DUAL-RANGE CYLINDER DRIVE INTERMEDIATE SHAFT MOUNTING ..........................................................

DUAL-RANGE CYLINDER DRIVE INTERMEDIATE SHEAVE ............................................................................

DUAL-RANGE CYLINDER DRIVE TIGHTENER..................

DUAL-RANGE LOCKOUT ARM............................................

PAGE 70 - 8 120 - 78 120 - 100 120 - 102 40 - 32 40 - 32 120 - 76 120 - 66 120 - 72 120 - 74 120 - 70 120 - 68

E 1C9 1C11 2K5 1C7 2D3 1C5 1C5 2C3 2C5 2C9 2I13 2I13 2I15 2I17 2K11 2H24 2I1 2I3 2C5 1C17 2I23

ELECTRICAL CONNECTOR SERVICE KIT ........................

ELECTRICAL CONNECTOR SERVICE KIT ........................

ELECTRICAL HARNESS, DIAL-A-MATIC ............................

ELECTRICAL TERMINALS AND CONNECTORS, WEATHERPACK ..............................................................

ELECTROMAGNETIC CLUTCH, HEADER ..........................

ELECTRONIC BOARDS........................................................

ELECTRONIC HOUSING ASSEMBLY AND ELECTRONIC BOARDS ..................................................

ELEMENT, CHAFFER ..........................................................

ELEMENT, CHAFFER EXTENSION ....................................

ELEMENT, SIEVE ................................................................

ELEVATOR DRIVE IDLER, CLEAN GRAIN ........................

ELEVATOR DRIVE TIGHTENER, CLEAN GRAIN ..............

ELEVATOR SHIELDS, UPPER CLEAN GRAIN ( -640400) ..................................................................

ELEVATOR SHIELDS, UPPER CLEAN GRAIN (640401) ..................................................................

ELEVATOR, CLEAN GRAIN BELTS ....................................

ELEVATOR, LOWER, CLEAN GRAIN ................................

ELEVATOR, LOWER, CLEAN GRAIN ................................

ELEVATOR, UPPER CLEAN GRAIN ..................................

EXTENSION ELEMENT, CHAFFER ....................................

EXTENSION, DRAWBAR ......................................................

EXTENSIONS, GRAIN TANK ..............................................

40 - 46 40 - 48 160 - 4 40 - 44 120 - 60 40 - 42 40 - 42 120 - 36 120 - 38 120 - 42 130 - 18 130 - 18 130 - 20 130 - 22 170 - 5 130 - 4 130 - 6 130 - 8 120 - 38 50 - 1 130 - 28

F 1G11 1G11 2E9 2E11 2E13 2K9 2E7 2B19 2B21 1I5 1I1 1I1 1I3 1I1 2K9

FAN DRIVE SHIELD (L-H SIDE) ..........................................

FAN DRIVE SHIELDS (L-H SIDE)........................................

FAN DRIVE SPEED CONTROL LINKAGE ( -640400) ..................................................................

FAN DRIVE SPEED CONTROL LINKAGE (640401) ..................................................................

FAN DRIVE SPEED CONTROL SHEAVE LINKAGE ..........

FAN, CLEANING, BELTS......................................................

FAN, DRIVE, CLEANING, SEPARATOR ............................

FANS, CLEANING ................................................................

FANS, CLEANING ................................................................

FEED PLATE SUPPORT ......................................................

FEEDER CONVEYOR BRACKET ........................................

FEEDER CONVEYOR DRIVE CHAIN..................................

FEEDER CONVEYOR DRIVE CHAIN, TIGHTENER AND GUIDES ....................................................................

FEEDER CONVEYOR IDLER ..............................................

FEEDER HOUSE BELTS ......................................................

80 - 16 80 - 16 120 - 90 120 - 92 120 - 94 170 - 3 120 - 88 120 - 28 120 - 30 110 - 24 110 - 20 110 - 20 110 - 22 110 - 20 170 - 3

GRID 1H11 2E15 1H9 1H23 1H13 1H21 1I7 1H17 1H15 2A22 1E1 2F3 1H9 1H23 1D20 2C7 1H13 1F21 2G3 2C11 1B22 1G20 1H13

(01-DEC-94)

110 - 6 120 - 96 110 - 4 110 - 18 110 - 8 110 - 16 110 - 26 110 - 12 110 - 10 120 - 6 70 - 14 120 - 108 110 - 4 110 - 18 70 - 8 120 - 40 110 - 8 80 - 2 120 - 132 120 - 44 40 - 34 80 - 26 110 - 8

G 1H7 1C25 2D9 2J1 1C25 2D23 1D3 2I11 2E1 2J11 2I21 2J18 1B20 2I23 1B18 1B18 2I19 1B18 1F2 1F1 2J3 2J3 1B18 2B5 2B7 2F21 1I3 1G16

9501 PULL-TYPE COMBINE PC2310

PAGE FEEDER HOUSE DRIVE SHIELDS AND SAFETY STOP ................................................................................

FEEDER HOUSE DRIVE TIGHTENER ................................

FEEDER HOUSE DRIVE TIGHTENER (FIXED SPEED)..............................................................................

FEEDER HOUSE FLOOR ....................................................

FEEDER HOUSE FRAME ....................................................

FEEDER HOUSE FRONT DRIVE SHAFT, SHEAVE AND MOUNTINGS (FIXED SPEED WITH ......................

FEEDER HOUSE SLIP CLUTCH ........................................

FEEDER HOUSE UPPER DRIVE SHAFT, SHEAVE AND MOUNTING (FIXED SPEED WITH ........................

FEEDER HOUSE UPPER SHAFT........................................

FEEDER HOUSE/SEPARATOR SEAL, STONE TRAP AND DOOR ............................................................

FILTER, MAIN HYDRAULIC..................................................

FINS, SUPPORTS AND DECK, STRAW CHOPPER ..........

FIXED SPEED FEEDER HOUSE DRIVE TIGHTENER ......

FLOOR, FEEDER HOUSE....................................................

FLOW CONTROL VALVE, REEL DRIVE ............................

FRAME, CHAFFER ..............................................................

FRAME, FEEDER HOUSE....................................................

FRAME, SEPARATOR ..........................................................

FRAME, SHIELDS AND HANDLES, CHAFF SPREADER..........................................................

FRAME, SIEVE......................................................................

FRONT AND REAR TURN AND TAIL LIGHTS ..................

FRONT CORNER SHEET, R H............................................

FRONT FEEDER HOUSE ....................................................

GEAR BOX, REVERSER ......................................................

GEAR CASE ..........................................................................

GEAR CASE, DUAL-RANGE CYLINDER DRIVE ................

GEAR CASE, VERTICAL AUGER LOWER ........................

GEAR CASE, WITH GEARS AND SHAFTS ........................

GEARCASE DRIVE, STRAW WALKER ..............................

GEARCASE TOP IDLER ......................................................

GEARCASE, CLEAN GRAIN ELEVATOR............................

GEARCASE, DRIVE, STRAW WALKER ..............................

GEARCASE, HORIZONTAL UNLOADING AUGER DRIVE ................................................................................

GRAIN TANK BASE ..............................................................

GRAIN TANK CROSS AUGERS ..........................................

GRAIN TANK DUAL LEVEL MONITOR HARNESS ............

GRAIN TANK EXTENSIONS ................................................

GRAIN TANK LEVEL MONITOR ..........................................

GRAIN TANK LIGHT ............................................................

GRAIN TANK TOP ................................................................

GRAIN TANK UNLOADING AUGER LIMIT SWITCH..........

GRAIN TANK UNLOADING, KIT, ARMATURE, SOLENOID CONTROL VALVE DOUBLE PILOTED ......

GRAIN TANK UNLOADING, SOLENOID CONTROL VALVE DOUBLE PILOTED ..............................................

GRAIN TANK VERTICAL UNLOADING AUGER ................

GRAIN TANK VERTICAL UNLOADING AUGER HOUSING ..........................................................................

GRAIN TANK WIRING HARNESS, LIGHT, LIMIT SWITCH AND LEVEL MONITOR ....................................

GRATE AND RASP BAR CONCAVE ..................................

GRATE AND RASP BAR CONCAVE ..................................

GUARD AND STRAW SPREADER MOUNTING ................

GUIDES, TIGHTENER AND FEEDER CONVEYOR DRIVE CHAIN ..................................................................

GULL WING DOORS, L.H. ..................................................

110 - 2 50 - 9 120 - 66 130 - 30 50 - 9 120 - 80 50 - 12 130 - 16 120 - 82 130 - 40 130 - 26 130 - 48 40 - 32 130 - 28 40 - 30 40 - 30 130 - 24 40 - 30 70 - 43 70 - 42 130 - 32 130 - 32 40 - 30 120 - 14 120 - 16 120 - 126 110 - 22 80 - 22

10-7

PN=7

1A9 9501 PULL-TYPE COMBINE ALPHABETICAL INDEX - CONTINUED GRID 1G18

GULL WING DOORS, R.H. ..................................................

PAGE 80 - 24

GRID 2F13 2F15

H 2A18 1F23 1A22 1B8 1B6 1A24 1B4 1B10 1A20 1B16 2K9 2D3 2K5 1E4 1E5 1E2 1E17 1E18 1E14 1B23 2H22 1C18 1D15 1C20 1D14 1D14 1A24 1F18 1B1 1B3 1D7 1G7 2J14 2J9 2J11 2J12 2J13 2J5 1D7 1E2 1E11 1F9 2G17 1D15 1D14 1D24 2G15 2H17 2H15 2F11

10-8

HANDLE, LATCHES AND CONVEYOR AUGER CLEANOUT DOOR ..........................................................

HANDRAILS, REAR LADDER LANDING ............................

HARDWARE KIT, CONTROL BOX ......................................

HARNESS FOR REAR LIGHTS AND SHIELDS ................

HARNESS WIRING, MAIN, L.H. CENTER ..........................

HARNESS, HITCH TUBE......................................................

HARNESS, WIRING, MAIN, L.H. FRONT ............................

HARNESS, WIRING, R.H. MAIN ..........................................

HARVESTRAK MAIN CONTROL BOX ................................

HARVESTRAK MONITOR WIRING HARNESS ..................

HEADER BELTS....................................................................

HEADER ELECTROMAGNETIC CLUTCH ..........................

HEADER HEIGHT CONTROL, ELECTRIC HARNESS, DIAL-A-MATIC ..............................................

HEADER LIFT CYLINDER, HYDRAULIC ............................

HEADER LIFT HYDRAULIC CYLINDER KIT ......................

HEADER LIFT LINES AND HOSES ....................................

HEADER LIFT MODULE, ARMATURE KIT ........................

HEADER LIFT MODULE, POPPET KIT ..............................

HEADER LIFT MODULE, SOLENOID CONTROL VALVE ..............................................................................

HEADER LIGHT ....................................................................

HINGED DOOR, LOWER AUGER, CLEAN GRAIN ............

HITCH ....................................................................................

HITCH BEAM HYDRAULIC LINES AND HOSES ................

HITCH BEAM JACK STAND ................................................

HITCH HYDRAULIC HOSES ................................................

HITCH HYDRAULIC LINES ..................................................

HITCH TUBE HARNESS AND SHORT TURN SENSOR....

HITCH TUBE HYDRAULIC CYLINDER................................

HITCH, MAIN HARNESS ASSEMBLY ................................

HITCH, MAIN HARNESS ASSEMBLY ................................

HOLDER, HOSE....................................................................

HOOD, REAR ........................................................................

HORIZONTAL UNLOADING AUGER (14- AND 17-FT.) ..............................................................

HORIZONTAL UNLOADING AUGER HUB SUPPORT ................................................................

HORIZONTAL UNLOADING AUGER DRIVE GEARCASE ......................................................................

HORIZONTAL UNLOADING AUGER HOUSING (14- AND 17-FT.) ..............................................................

HORIZONTAL UNLOADING AUGER HOUSING (14- AND 17-FT.) ..............................................................

HORIZONTAL UNLOADING AUGER SWIVEL ....................

HOSE HOLDER ....................................................................

HOSES AND LINES, HEADER LIFT....................................

HOSES AND LINES, HYDRAULIC, CYLINDER SPEED ..............................................................................

HOSES AND LINES, UNLOADING AUGER SWING HYDRAULIC CYLINDER ..................................................

HOSES, CHAFF SPREADER ..............................................

HOSES, HITCH BEAM HYDRAULIC....................................

HOSES, HITCH HYDRAULIC ..............................................

HOSES, HYDRAULIC, REEL PUMP ....................................

HOSES, LINES AND MOTOR, CHAFF SPREADER ..........

HOSES, LUBE, L.H. ..............................................................

HOSES, LUBE, R. H. ............................................................

HOUSING AND KNIFEBACK, STRAW CHOPPER ( -640400) ..................................................................

120 - 2 80 - 4 40 - 8 40 - 20 40 - 18 40 - 10 40 - 16 40 - 22 40 - 6 40 - 28 170 - 3 120 - 60 160 - 4 70 - 18 70 - 19 70 - 16 70 - 33 70 - 34 70 - 30 40 - 36 130 - 2 50 - 2 70 - 3 50 - 4 70 - 2 70 - 2 40 - 10 70 - 61 40 - 12 40 - 14 50 - 16 80 - 12

2B15 2B17 2J3 1A16 1C5 2J12 2J13 1D10 2H3 2H10 1F17 1F18 1F13 1D24 1E11 1E2 1D15 1F13 1E8 1E10 1E1 1E10

130 - 40 130 - 42

2D17

130 - 38

130 - 43 130 - 34 50 - 16 70 - 16 70 - 26 70 - 52 120 - 146 70 - 3 70 - 2 70 - 12 120 - 144 120 - 172 120 - 170

120 - 120 120 - 24 120 - 26 130 - 32 40 - 2 40 - 42 130 - 42 130 - 43 50 - 19 120 - 156 120 - 164 70 - 60 70 - 61 70 - 56 70 - 12 70 - 26 70 - 16 70 - 3 70 - 56 70 - 22 70 - 24 70 - 14 70 - 24

IDLER, CHOPPER DRIVE ....................................................

IDLER, DRIVE, CLEAN GRAIN ELEVETOR........................

IDLER, DRIVE, LOWER........................................................

IDLER, FEEDER CONVEYOR..............................................

IDLER, GEARCASE ..............................................................

IDLER, MAIN DRIVE ............................................................

INDICATOR BRACKETS, CONCAVE ..................................

INTAKE SHIELDS, CLEANING FAN ....................................

INTAKE SHIELDS, CLEANING FAN ....................................

INTERMEDIATE SHAFT MOUNTING, CYLINDER DRIVE, DUAL-RANGE ......................................................

INTERMEDIATE SHEAVE, CYLINDER DRIVE, DUAL-RANGE ..................................................................

120 - 138 130 - 18 50 - 10 110 - 20 50 - 12 50 - 14 120 - 18 120 - 28 120 - 30 120 - 72 120 - 74

J 1C20 1F20 1C22

JACK STAND, HITCH BEAM................................................

JACKSTAND, REAR..............................................................

JOINT, UNIVERSAL, REAR ..................................................

50 - 4 80 - 1 50 - 6

K 2H19 1E16 1D23 1E24

120 - 116

120 - 118

I 2G9 2I13 1D1 1I1 1D3 1D5 2B9 2B19 2B21 2D15

130 - 44

PAGE HOUSING AND KNIFEBANK, STRAW CHOPPER (640401) ..................................................................

HOUSING AND KNIFEBANK, STRAW CHOPPER (640401) ..................................................................

HOUSING AND SHOE GRAIN SUPPLY AUGERS ............

HOUSING AND SHOE GRAIN SUPPLY AUGERS ............

HOUSING, CHARGE, VERTICAL UNLOADING AUGER ..............................................................................

HOUSING, CONTROL BOX, DIAL-A-MATIC ......................

HOUSING, ELECTRONIC ASSEMBLY ................................

HOUSING, HORIZONTAL UNLOADING AUGER (14- AND 17-FT.) ..............................................................

HOUSING, HORIZONTAL UNLOADING AUGER (14- AND 17-FT.) ..............................................................

HOUSING, SPINDLE, AND WHEEL ....................................

HOUSING, TAILINGS ELEVATOR ......................................

HOUSING, UPPER TAILINGS AUGER ................................

HYDRAULIC BELT TIGHTENING CYLINDER ....................

HYDRAULIC CYLINDER, HITCH TUBE ..............................

HYDRAULIC CYLINDER, UNLOADING AUGER SWING ..............................................................................

HYDRAULIC HOSES, REEL PUMP ....................................

HYDRAULIC LINES AND HOSES, CYLINDER SPEED ..............................................................................

HYDRAULIC LINES AND HOSES, HEADER LIFT..............

HYDRAULIC LINES AND HOSES, HITCH BEAM ..............

HYDRAULIC MOUNTING, UNLOADING AUGER SWING ..............................................................................

HYDRAULIC RETURN LINES ..............................................

HYDRAULIC/HYDROSTATIC OIL RESERVOIR ..................

HYDRAULIC, MAIN, FILTER ................................................

HYDROSTATIC/HYDRAULIC RESERVOIR ........................

KEY STOCK, METRIC KIT .................................................. 120 - 174 KIT, ADJUSTABLE STOP, HEADER LIFT MODULE .......... 70 - 32 KIT, ADJUSTING SCREW, REEL DRIVE FLOW CONTROL VALVE ............................................................ 70 - 11 KIT, ARMATURE, SOLENOID CONTROL VALVE DOUBLE PILOTED MODULE, AUGER SWING.............. 70 - 40 9501 PULL-TYPE COMBINE PC2310

(01-DEC-94) PN=8

1A10 9501 PULL-TYPE COMBINE ALPHABETICAL INDEX - CONTINUED GRID 1F2 1E20 1E17 1A22 1C9 1C11 1E5 2H19 1E25 1F3 1E18 1D22 1F7 1E22 1E21 1C13 1F15 2F11 2F13 2F15 2F9

PAGE KIT, ARMATURE, SOLENOID CONTROL VALVE DOUBLE PILOTED MODULE, GRAIN TANK UN. ..........

KIT, ARMATURE, SOLENOID CONTROL VALVE, CYLINDER SPEED ..........................................................

KIT, ARMATURE, SOLENOID CONTROL VALVES, HEADER LIFT MODULE ..................................................

KIT, CONTROL BOX HARDWARE ......................................

KIT, ELECTRICAL CONNECTOR SERVICE........................

KIT, ELECTRICAL CONNECTOR SERVICE........................

KIT, HEADER LIFT HYDRAULIC CYLINDER......................

KIT, METRIC KEY STOCK ..................................................

KIT, POPPET, SOLENOID CONTROL VALVE DOUBLE PILOTED MODULE, AUGER SWING..............

KIT, POPPET, SOLENOID CONTROL VALVE DOUBLE PILOTED MODULE, REEL FORE/AFT............

KIT, POPPET, SOLENOID CONTROL VALVE UNBALANCED LOAD MODULE (HEADER LIFT) ..........

KIT, REEL DRIVE FLOW CONTROL VALVE......................

KIT, REEL HYDRAULIC PUMP SEAL ................................

KIT, RELIEF, SOLENOID CONTROL VALVE BIDIRECTIONAL MOD, CYLINDER DRIVE ........................

KIT, SOLENOID CONTROL VALVE, CYLINDER SPEED, POPPET ..........................................

KIT, TERMINAL AND WIRING ............................................

KIT, UNLOADING AUGER SWING HYDRAULIC CYLINDER ........................................................................

KNIFEBACK AND HOUSING, STRAW CHOPPER ( -640400) ..................................................................

KNIFEBANK AND HOUSING, STRAW CHOPPER (640401) ..................................................................

KNIFEBANK AND HOUSING, STRAW CHOPPER (640401) ..................................................................

KNIFEBANK AND STRAW CHOPPER HOUSING ( -640400) ..................................................................

GRID 1E11

70 - 43 1F9 70 - 36 70 - 33 40 - 8 40 - 46 40 - 48 70 - 19 120 - 174

2G17 1D15 1D14 1D24 1E8 2E13 2E9

70 - 41

2E11

70 - 44

2I9 2K4 2D11 1B14 2H22 2H24 2I1 2G23 2K10 2H7 2H8 2G23 2G23 2H1 2H6 2K1 2H15 2H17

70 - 34 70 - 10 70 - 50 70 - 38 70 - 37 40 - 50 70 - 58 120 - 116 120 - 118 120 - 120

PAGE LINES AND HOSES, HYDRAULIC, CYLINDER SPEED ..............................................................................

LINES AND HOSES, UNLOADING AUGER SWING HYDRAULIC CYLINDER ..................................................

LINES, CHAFF SPREADER..................................................

LINES, HITCH BEAM HYDRAULIC......................................

LINES, HITCH HYDRAULIC..................................................

LINES, HYDRAULIC, REEL PUMP ......................................

LINES, RETURN, HYDRAULIC ............................................

LINKAGE, SHEAVE, FAN DRIVE SPEED CONTROL ........

LINKAGE, SPEED CONTROL, FAN DRIVE ( -640400) ..................................................................

LINKAGE, SPEED CONTROL, FAN DRIVE (640401) ..................................................................

LOADING AUGER, CLEAN GRAIN......................................

LOCK, LEVER SELECTOR ..................................................

LOCKOUT ARM, DUAL-RANGE ..........................................

LOW SHAFT SPEED MONITORS AND BRACKETS..........

LOWER AUGER, CLEAN GRAIN ........................................

LOWER ELEVATOR, CLEAN GRAIN ..................................

LOWER ELEVATOR, CLEAN GRAIN ..................................

LOWER TAILINGS AUGER ..................................................

LOWER TAILINGS AUGER BELT........................................

LOWER TAILINGS AUGER CHAIN TIGHTENER................

LOWER TAILINGS AUGER DRIVE TIGHTENER................

LOWER TAILINGS AUGER SHAFT ....................................

LOWER TAILINGS AUGER SHAFT TIGHTENER ..............

LOWER TAILINGS AUGER TROUGH ................................

LOWER TROUGH SUPPORT ..............................................

LUBE BANK, UNLOADING AUGER ....................................

LUBE HOSES R. H. ..............................................................

LUBE HOSES, L.H. ..............................................................

70 - 26 70 - 52 120 - 146 70 - 3 70 - 2 70 - 12 70 - 22 120 - 94 120 - 90 120 - 92 130 - 14 160 - 2 120 - 68 40 - 26 130 - 2 130 - 4 130 - 6 120 - 152 170 - 4 120 - 160 120 - 162 120 - 152 120 - 152 120 - 154 120 - 159 130 - 58 120 - 170 120 - 172

120 - 114

M L 1B8 1G16 1B6 1B4 1H3 1G3 1G5 1H3 1G3 2A18 2K13 1H3 1H3 1B20 1B20 1B18 2K4 1E4 1E5 1B18 1B23 1B22 1B22 1B18 2G13 1E2

L.H. AND R.H. MAIN WIRING HARNESS, L.H. AND R.H. REAR ......................................................

L.H. GULL WING DOORS ....................................................

L.H. MAIN WIRING HARNESS, L.H. CENTER....................

L.H. MAIN WIRING HARNESS, L.H. FRONT ......................

LADDER, LEFT-HAND LANDING ........................................

LADDER, REAR ....................................................................

LANDING SUPPORT ............................................................

LANDING, LEFT-HAND ........................................................

LANDING, REAR LADDER ..................................................

LATCHES, HANDLE AND CONVEYOR AUGER CLEANOUT DOOR ..........................................................

LEFT-HAND DECALS ..........................................................

LEFT-HAND LANDING AND LADDER ................................

LEFT-HAND LANDING LADDER..........................................

LEVEL MONITOR WIRING HARNESS, DUAL ....................

LEVEL MONITOR, DUAL ......................................................

LEVEL MONITOR, GRAIN TANK ........................................

LEVER SELECTOR LOCK....................................................

LIFT CYLINDER, HEADER, HYDRAULIC ............................

LIFT, HEADER, HYDRAULIC CYLINDER KIT ....................

LIGHT, GRAIN TANK ............................................................

LIGHT, HEADER ..................................................................

LIGHTS, FRONT AND REAR TAIL ......................................

LIGHTS, FRONT AND REAR TURN ....................................

LIMIT SWITCH, GRAIN TANK UNLOADING AUGER ........

LINES AND FITTING, CHAFF SPREADER ........................

LINES AND HOSES, HEADER LIFT....................................

9501 PULL-TYPE COMBINE PC2310

(01-DEC-94)

40 - 20 80 - 22 40 - 18 40 - 16 80 - 34 80 - 8 80 - 10 80 - 34 80 - 8 120 - 2 170 - 8 80 - 34 80 - 34 40 - 32 40 - 32 40 - 30 160 - 2 70 - 18 70 - 19 40 - 30 40 - 36 40 - 34 40 - 34 40 - 30 120 - 142 70 - 16

1A20 1D5 1F21 1B1 1B3 1E1 1D7 1C22 1C18 2H19 1B16 1B18 1B14 1C3 1C1 2G17 2G7 1E10 2F21 1F13 1F4 1F5 1A16 1H1 1G9

MAIN CONTROL BOX, HARVESTRAK................................

MAIN DRIVE IDLER ..............................................................

MAIN FRAME, SEPARATOR................................................

MAIN HARNESS ASSEMBLY, HITCH ................................

MAIN HARNESS ASSEMBLY, HITCH ................................

MAIN HYDRAULIC FILTER ..................................................

MAIN POWER SHIELDS ......................................................

MAIN POWERSHAFT............................................................

MAINFRAME ..........................................................................

METRIC KEY STOCK KIT ....................................................

MONITOR WIRING HARNESS, HARVESTRAK ..................

MONITOR, LEVEL, GRAIN TANK ........................................

MONITORS AND BRACKETS, LOW SHAFT SPEED ........

MOTOR, ADJUSTING, CONCAVE ......................................

MOTOR, ADJUSTING, SEPARATOR FAN DRIVE..............

MOTOR, CHAFF SPREADER ..............................................

MOUNTING SUPPORT, CHAFF SPREADER......................

MOUNTING, HYDRAULIC/HYDRO OIL RESERVOIR ........

MOUNTING, STRAW SPREADER AND GUARD ................

MOUNTING, UNLOADING AUGER SWING HYDRAULIC ......................................................................

MOUNTINGS, SOLENOID CONTROL VAVLE MODULE ASSEMBLY ......................................................

MOUNTINGS, SOLENOID CONTROL VAVLE MODULE ASSEMBLY ......................................................

MTG. BRKT., CONTROL BOX, DIAL-A-MATIC ..................

MUD SHIELDS (R.H. SIDE)..................................................

MUD SHIELDS, AUGER DRIVE (R-H SIDE) ......................

40 - 6 50 - 14 80 - 2 40 - 12 40 - 14 70 - 14 50 - 16 50 - 6 50 - 2 120 - 174 40 - 28 40 - 30 40 - 26 40 - 40 40 - 38 120 - 146 120 - 136 70 - 24 120 - 126 70 - 56 70 - 46 70 - 47 40 - 2 80 - 32 80 - 14

10-9

PN=9

1A11 9501 PULL-TYPE COMBINE ALPHABETICAL INDEX - CONTINUED GRID

PAGE

P 2H10 2C13 2J16 1G1 1B12 1E25 1F3 1E21 1E18 1D7 1C21 1C22 2C1 2B23 2D5 2E17 2G21 2G15 2G19 1F7 1D24

PADDLES, UPPER TAILINGS AUGER................................

PAN, SHAKER ......................................................................

PLATE, CROSS AUGER BEARING, L.H. ............................

PLATFORM, REAR ..............................................................

PLUGGING SENSING SWITCH, STRAW WALKER ..........

POPPET KIT, SOLENOID CONTROL VALVE DOUBLE PILOTED MODULE, AUGER SWING..............

POPPET KIT, SOLENOID CONTROL VALVE DOUBLE PILOTED MODULE, REEL FORE/AFT............

POPPET KIT, SOLENOID CONTROL VALVE, BIDIRECTIONAL MOD, CYLINDER DRIVE ........................

POPPET KIT, SOLENOID CONTROL VALVES, HEADER LIFT MODULE ..................................................

POWER SHIELDS, MAIN......................................................

POWERSHAFT AND SHIELD, TELESCOPING ..................

POWERSHAFT, MAIN ..........................................................

PRE-CLEANER CHAFFER FRAME ....................................

PRE-CLEANING CHAFFER ..................................................

PRIMARY COUNTERSHAFT, SUPPORTS AND VARIABLE SHEAVE..................................................................

PUMP MOUNTING SHEAVE, REEL / BELT PICKUP DRIVE ................................................................................

PUMP SEAL KIT, CHAFF SPREADER................................

PUMP, CHAFF SPREADER..................................................

PUMP, CHAFF SPREADER..................................................

PUMP, REEL HYDRAULIC, SEAL KIT ................................

PUMP, REEL, HYDRAULIC HOSES ....................................

120 - 164 120 - 46 130 - 46 80 - 6 40 - 24 70 - 41 70 - 44 70 - 37 70 - 34 50 - 16 50 - 5 50 - 6 120 - 34 120 - 32

120 - 98 120 - 150 120 - 144 120 - 148 70 - 50 70 - 12

1D18 1F3 1F7 1D24 1E22 1E10 1H19 1E8 1I9 1H7 1H17 1H21

10-10

R.H. GULL WING DOORS....................................................

R.H. MAIN WIRING HARNESS ............................................

RASP BAR CONCAVE AND GRATE ..................................

RASP BAR CONCAVE AND GRATE ..................................

RASP BAR THRESHING CYLINDER ..................................

REAR CORNER SHEET, L H ..............................................

REAR HOOD ........................................................................

REAR JACKSTAND ..............................................................

REAR LADDER......................................................................

REAR LADDER AND LANDING ..........................................

REAR LADDER LANDING ....................................................

REAR LADDER LANDING HANDRAILS ..............................

REAR LIGHT HARNESS AND SHIELDS ............................

REAR PLATFORM ................................................................

REEL BELTS ........................................................................

REEL DRIVE FLOW CONTROL VALVE..............................

REEL DRIVE FLOW CONTROL VALVE..............................

REEL DRIVE FLOW CONTROL VALVE, ADJUSTING SCREW KIT ......................................................................

REEL DRIVE HYDRAULIC SYSTEM FRONT AND L.H. SIDE....................................................

REEL FORE/AFT, KIT, POPPET, SOLENOID CONTROL VALVE DOUBLE PILOTED MODULE ..........

REEL HYDRAULIC PUMP SEAL KIT ..................................

REEL PUMP HOSES, HYDRAULIC ....................................

RELIEF KIT, SOLENOID CONTROL VALVE BIDIRECTIONAL MOD, CYLINDER DRIVE ........................

RESERVOIR, HYDRAULIC/HYDROSTATIC ........................

RETURN FLOOR, FEEDER HOUSE....................................

RETURN LINES, HYDRAULIC ............................................

REVERSER ACTUATOR ......................................................

REVERSER GEAR BOX ......................................................

REVERSER) ..........................................................................

REVERSER) ..........................................................................

80 - 24 40 - 22 120 - 14 120 - 16 120 - 12 80 - 28 80 - 12 80 - 1 80 - 8 80 - 8 80 - 8 80 - 4 40 - 20 80 - 6 170 - 3 70 - 8 70 - 10 70 - 11 70 - 6 70 - 44 70 - 50 70 - 12

1H11 2J24 1H23 2G5 2D21 1B12 1A24 1A24 1F21 2C23 2D1 2E7 1C1 1F21 2A22 1C9 1C11 1C25 2B11 1H21 1H17 2G23 2I5 1H15 2C13 2B1 2F5 2E13 2I11 2E17 2I5 2E5 2F1 1C21 1G12 1G11 1G14 1D9 2H13 1B8 1D7 1H1 1G9 2E23 2I15 2I17

70 - 38 70 - 24 110 - 14 70 - 22 110 - 28 110 - 2 110 - 12 110 - 16

PAGE ROD AND KNOB, CHAFF SPREADER CONTROL ............ 120 - 140 ROTOR AND SHEAVE, STRAW CHOPPER ...................... 120 - 110

S

120 - 62

R 1G18 1B10 2B5 2B7 2B3 1G22 1G7 1F20 1G3 1G3 1G3 1F23 1B8 1G1 2K9 1D20 1D22 1D23

GRID 2G11 2F5

2B15 2B17 1G16 1G18 1G14 2E3

SAFETY STOP, DRIVE SHIELDS, FEEDER HOUSE ........

SAMPLING TROUGH, GRAIN TANK ..................................

SEAL, FEEDER HOUSE ......................................................

SEALS AND PAN, CHAFF SPREADER ..............................

SECONDARY COUNTERSHAFT DRIVE ............................

SENSING SWITCH, STRAW WALKER PLUGGING ..........

SENSOR, HITCH TUBE........................................................

SENSOR, SHORT TURN ......................................................

SEPARATOR CROSS BRACES ..........................................

SEPARATOR CURTAIN........................................................

SEPARATOR CURTAIN........................................................

SEPARATOR FAN DRIVE ....................................................

SEPARATOR FAN DRIVE ADJUSTING MOTOR................

SEPARATOR FRAME ..........................................................

SEPARATOR/FEEDER HOUSE SEAL, STONE TRAP AND DOOR ............................................................

SERVICE KIT, ELECTRICAL CONNECTORS ....................

SERVICE KIT, ELECTRICAL CONNECTORS ....................

SHAFT (GEAR CASE) ..........................................................

SHAFT, BEATER AND DRIVE BELT ..................................

SHAFT, DRIVE, FRONT, SHEAVE AND MOUNTINGS (FIXED SPEED WITH REVERSER) ........

SHAFT, DRIVE, UPPER, SHEAVE AND MOUNTING (FIXED SPEED WITH REVERSER) ................................

SHAFT, LOWER TAILINGS AUGER ....................................

SHAFT, UPPER CLEAN GRAIN ELEVATOR ......................

SHAFT, UPPER, FEEDER HOUSE......................................

SHAKER PAN........................................................................

SHEAR BAR, CYLINDER......................................................

SHEAVE AND ROTOR, STRAW CHOPPER ......................

SHEAVE LINKAGE, FAN DRIVE SPEED CONTROL ........

SHEAVE, CLEAN GRAIN ELEVATOR GEARCASE............

SHEAVE, MOUNTING, PUMP, REEL / BELT PICKUP DRIVE ................................................................

SHEAVE, UPPER CLEAN GRAIN ELEVATOR ..................

SHEAVES, BEATER DRIVE AND TIGHTENER ..................

SHEILDS, STRAW CHOPPER DRIVE (640401) ..................................................................

SHIELD AND TELESCOPING POWERSHAFT....................

SHIELD, DRIVE, R.H. REAR ................................................

SHIELD, FAN DRIVE (L-H SIDE) ........................................

SHIELD, R.H. SIDE ..............................................................

SHIELD, REAR UNIVERSAL JOINT ....................................

SHIELD, UPPER TAILINGS AUGER DRIVE ......................

SHIELDS FOR REAR LIGHT HARNESS ............................

SHIELDS, MAIN POWER......................................................

SHIELDS, MUD (R.H. SIDE) ................................................

SHIELDS, MUD, AUGER DRIVE (R-H SIDE)......................

SHIELDS, STRAW CHOPPER DRIVE ( -640400) ..................................................................

SHIELDS, UPPER CLEAN GRAIN ELEVATOR ( -640400) ..................................................................

SHIELDS, UPPER CLEAN GRAIN ELEVATOR (640401) ..................................................................

SHOE GRAIN SUPPLY AUGERS AND HOUSING ............

SHOE GRAIN SUPPLY AUGERS AND HOUSING ............

SIDE SHEET DOORS ..........................................................

SIDE SHEET DOORS ..........................................................

SIDE SHIELD, R.H. SIDE ....................................................

SIEVE AND CHAFFER DRIVE, CONVEYOR AUGERS AND STRAW WALKER ....................................................

9501 PULL-TYPE COMBINE PC2310

110 - 6 130 - 56 110 - 18 120 - 134 120 - 78 40 - 24 40 - 10 40 - 10 80 - 2 120 - 56 120 - 58 120 - 88 40 - 38 80 - 2 120 - 6 40 - 46 40 - 48 50 - 9 120 - 20 110 - 16 110 - 12 120 - 152 130 - 10 110 - 10 120 - 46 120 - 10 120 - 110 120 - 94 130 - 16 120 - 98 130 - 10 120 - 86 120 - 106 50 - 5 80 - 18 80 - 16 80 - 20 50 - 18 120 - 168 40 - 20 50 - 16 80 - 32 80 - 14 120 - 104 130 - 20 130 - 22 120 - 24 120 - 26 80 - 22 80 - 24 80 - 20 120 - 84

(01-DEC-94) PN=10

1A12 9501 PULL-TYPE COMBINE ALPHABETICAL INDEX - CONTINUED GRID 2C9 2C11 1E6 1I7 1E21 1E22 1E19 1F6 1E23 1F1 1F4 1F5 1E14 1E13 1E16 1E17 2E9 2E11 2E13 1D10 2D1 2G15 2F23 2K9 2I5 2H5 1C20 2A22 2K9 2F3 2F19 2E23 2F1 2E19 2E21 2F11 2F9 2F13 2F15 2F5 1B8 2F23 2C21 2F21 1B12 2C17

SIEVE ELEMENT ..................................................................

SIEVE FRAME ......................................................................

SINGLE ACCUMULATOR ....................................................

SLIP CLUTCH, FEEDER HOUSE ........................................

SOLENOID CONTROL VALVE BI-DIRECTIONAL MODULE POPPET KIT ....................................................

SOLENOID CONTROL VALVE BI-DIRECTIONAL MODULE RELIEF KIT ......................................................

SOLENOID CONTROL VALVE BI-DIRECTIONAL MODULE, CYLINDER SPEED ........................................

SOLENOID CONTROL VALVE BRACKETS ........................

SOLENOID CONTROL VALVE DOUBLE PILOTED MODULE, AUGER SWING ..............................................

SOLENOID CONTROL VALVE DOUBLE PILOTED MODULE, GRAIN TANK UNLOADING ............................

SOLENOID CONTROL VALVE MODULE ASSEMBLY AND MOUNTINGS ............................................................

SOLENOID CONTROL VALVE MODULE ASSEMBLY AND MOUNTINGS ............................................................

SOLENOID CONTROL VALVE UNBALANCED LOAD MODULE (HEADER LIFT MODULE) ..............................

SOLENOID CONTROL VALVE UNLOAD MODULE............

SOLENOID CONTROL VALVES, ADJUSTABLE STOP KIT ....................................................................................

SOLENOID CONTROL VALVES, ARMATURE KIT, HEADER LIFT MODULE ..................................................

SPEED CONTROL LINKAGE, FAN DRIVE ( -640400) ..................................................................

SPEED CONTROL LINKAGE, FAN DRIVE (640401) ..................................................................

SPEED CONTROL, FAN DRIVE SHEAVE LINKAGE ........

SPINDLE, HOUSING, AND WHEEL ....................................

SPREADER CURTAIN ..........................................................

SPREADER, CHAFF, MOTOR, LINES AND HOSES..........

SPREADER, STRAW ............................................................

SPREADER, STRAW, BELTS ..............................................

SPROCKET, UPPER CLEAN GRAIN ELEVATOR ..............

SPROCKETS, TAILINGS ELEVATOR CONVEYOR ............

STAND, JACK, HITCH BEAM ..............................................

STONE TRAP, DOOR AND FEEDER HOUSE/ SEPARATOR SEAL ..........................................................

STRAW CHOPPER BELTS ..................................................

STRAW CHOPPER DECK, SUPPORTS AND FINS ..........

STRAW CHOPPER DOOR ..................................................

STRAW CHOPPER DRIVE SHIELDS ( -640400) ..................................................................

STRAW CHOPPER DRIVE SHIELDS (640401) ..................................................................

STRAW CHOPPER DRIVES (FRONT) ..............................

STRAW CHOPPER DRIVES (REAR) ..................................

STRAW CHOPPER HOUSING AND KNIFEBACK ( -640400) ..................................................................

STRAW CHOPPER HOUSING AND KNIFEBANK ( -640400) ..................................................................

STRAW CHOPPER HOUSING AND KNIFEBANK (640401) ..................................................................

STRAW CHOPPER HOUSING AND KNIFEBANK (640401) ..................................................................

STRAW CHOPPER ROTOR AND SHEAVE ........................

STRAW CHOPPER SENSOR BRACKET ............................

STRAW SPREADER ............................................................

STRAW SPREADER DRIVE, SHIELD AND STRAW WALKER CRANKS ..........................................................

STRAW SPREADER MOUNTING AND GUARD ................

STRAW WALKER (PLUGGING) SENSING SWITCH ..........

STRAW WALKER BEARING CONVERSION ( -1990)..........................................................................

9501 PULL-TYPE COMBINE PC2310

(01-DEC-94)

PAGE 120 - 42 120 - 44 70 - 20 110 - 26

GRID 2C21 2D23 2E1 2E3

70 - 37 70 - 38 70 - 35 70 - 48 70 - 39 70 - 42

2C19 2C15 2J23 1C15 2J7 1I5 1G5 2H6 2D5

70 - 46 1F15 70 - 47 70 - 30 70 - 28 70 - 32 70 - 33 120 - 90 120 - 92 120 - 94 50 - 19 120 - 58 120 - 144 120 - 128 170 - 3 130 - 10 120 - 158 50 - 4 120 - 6 170 - 3 120 - 108 120 - 124 120 - 104 120 - 106 120 - 100 120 - 102 120 - 116 120 - 114 120 - 118 120 - 120 120 - 110 40 - 20 120 - 128

1B12 2J7 2J7 2J5 1D18 1D16 1D16 1F11

PAGE STRAW WALKER CRANKS,STRAW SPREADER DRIVE AND SHIELD ....................................................................

STRAW WALKER DRIVE GEARCASE ................................

STRAW WALKER DRIVE GEARCASE ................................

STRAW WALKER, CONVEYOR AUGERS, SIEVE AND CHAFFER DRIVE..............................................................

STRAW WALKERS ..............................................................

STRAW WALKERS ( -1990)..........................................................................

STRAWCHOPPER TOP BELT GUIDE (TRAP) ..................

SUPPLEMENTARY TERMINALS AND CONNECTORS......

SUPPORT AND BRACES, AUGER......................................

SUPPORT, FEED PLATE ....................................................

SUPPORT, LANDING............................................................

SUPPORT, LOWER TROUGH ............................................

SUPPORTS AND VARIABLE SHEAVE, PRIMARY COUNTERSHAFT ............................................................

SWING, UNLOADING AUGER, HYDRAULIC CYLINDER KIT..................................................................

SWITCH, SENSING, STRAW WALKER PLUGGING ..........

SWIVEL SUPPORT AND BRACES, AUGER ......................

SWIVEL, AUGER SUPPORT................................................

SWIVEL, HORIZONTAL UNLOADING AUGER ..................

SYSTEM, HYDRAULIC, REEL DRIVE FRONT AND L.H. SIDE....................................................

SYSTEM, TRACTOR RETURN ............................................

SYSTEM, TRACTOR SUPPLY ............................................

SYSTEM, UNLOADING AUGER ENGAGE..........................

120 - 54 120 - 80 120 - 82 120 - 84 120 - 52 120 - 48 130 - 54 40 - 52 130 - 36 110 - 24 80 - 10 120 - 159 120 - 62 70 - 58 40 - 24 130 - 36 130 - 36 130 - 34 70 - 6 70 - 4 70 - 4 70 - 54

T 1B22 2H6 2H5 2H5 2H5 2H3 2J24 1C21 1C13 1C7 1C15 2A20 2B3 2E5 2D13 2E15 1I3 2G23 2H7 2H8 1H5 2I19 1D16 1D16 2A22 1B22

TAIL LIGHTS ........................................................................

TAILINGS DRIVE BRACKET ................................................

TAILINGS ELEVATOR CONVEYOR BEARINGS ................

TAILINGS ELEVATOR CONVEYOR CHAIN ........................

TAILINGS ELEVATOR CONVEYOR SPROCKETS ............

TAILINGS ELEVATOR HOUSING ........................................

TANK, GRAIN, SAMPLING TROUGH ..................................

TELESCOPING POWERSHAFT AND SHIELD....................

TERMINAL AND WIRING KIT ..............................................

TERMINALS, ELECTRICAL, WEATHERPACK ....................

TERMINALS, SUPPLEMENTARY, AND CONNECTORS....

THRESHING CYLINDER COVER ........................................

THRESHING CYLINDER, RASP BAR..................................

TIGHTENER AND BEATER DRIVE SHEAVES ..................

TIGHTENER, CYLINDER DRIVE, DUAL-RANGE................

TIGHTENER, FEEDER HOUSE DRIVE ..............................

TIGHTENER, GUIDES AND FEEDER CONVEYOR DRIVE CHAIN ..................................................................

TIGHTENER, LOWER TAILINGS AUGER ..........................

TIGHTENER, LOWER TAILINGS AUGER CHAIN ..............

TIGHTENER, LOWER TAILINGS AUGER DRIVE ..............

TOOL BOX ............................................................................

TOP, TANK, GRAIN ..............................................................

TRACTOR RETURN SYSTEM ............................................

TRACTOR SUPPLY SYSTEM ..............................................

TRAP, STONE ......................................................................

TURN LIGHTS ......................................................................

40 - 34 120 - 159 120 - 158 120 - 158 120 - 158 120 - 156 130 - 56 50 - 5 40 - 50 40 - 44 40 - 52 120 - 4 120 - 12 120 - 86 120 - 70 120 - 96 110 - 22 120 - 152 120 - 160 120 - 162 80 - 36 130 - 24 70 - 4 70 - 4 120 - 6 40 - 34

U 120 - 54 120 - 126 40 - 24 120 - 50

1D9 1C22 1D9 2K9

UNIVERSAL JOINT SHIELD (REAR) .................................. 50 - 18 UNIVERSAL JOINT, REAR .................................................. 50 - 6 UNIVERSAL SHIELD, GEAR CASE .................................... 50 - 18 UNLOADING AUGER BELTS .............................................. 170 - 3

10-11 PN=11

1A13 9501 PULL-TYPE COMBINE ALPHABETICAL INDEX - CONTINUED GRID 2J21 2J23 1F11 2J12 1B18 2K1 1F15 1F13 1F9 1F13 2J5 2J9 2K10 2I3 2I5 2I15 2I17 2I7 1H15 2K10 2H13 2H10 2H10 2H13 2H12

UNLOADING AUGER COUNTERSHAFT DRIVE ................

UNLOADING AUGER DRIVE BELT GUIDE ........................

UNLOADING AUGER ENGAGE SYSTEM ..........................

UNLOADING AUGER HOUSING, HORIZONTAL (14- AND 17-FT.) ..............................................................

UNLOADING AUGER LIMIT SWITCH..................................

UNLOADING AUGER LUBE BANK......................................

UNLOADING AUGER SWING HYDRAULIC CYLINDER KIT..................................................................

UNLOADING AUGER SWING HYDRAULIC CYLINDER ....

UNLOADING AUGER SWING HYDRAULIC CYLINDER LINES AND HOSES..........................................................

UNLOADING AUGER SWING HYDRAULIC MOUNTING ..

UNLOADING AUGER SWIVEL, HORIZONTAL ..................

UNLOADING AUGER, HORIZONTAL, HUB SUPPORT ................................................................

UNLOADING SYSTEM BELTS ............................................

UPPER CLEAN GRAIN ELEVATOR ....................................

UPPER CLEAN GRAIN ELEVATOR SHAFT, SPROCKET AND SHEAVE ..............................................

UPPER CLEAN GRAIN ELEVATOR SHIELDS ( -640400) ..................................................................

UPPER CLEAN GRAIN ELEVATOR SHIELDS (640401) ..................................................................

UPPER CLEAN GRAIN LOADING AUGER HOUSING ......

UPPER SHAFT, FEEDER HOUSE ......................................

UPPER TAILINGS AUGER BELT ........................................

UPPER TAILINGS AUGER DRIVE ......................................

UPPER TAILINGS AUGER HOUSING AND PADDLE ASSEMBLY........................................................................

UPPER TAILINGS AUGER PADDLE ASSEMBLY ..............

UPPER TAILINGS AUGER, DRIVE AND SHIELD ..............

UPPER TAILINGS DRIVE CHAIN TIGHTENER ..................

PAGE 130 - 52 130 - 54 70 - 54 130 - 42 40 - 30 130 - 58 70 - 58 70 - 56 70 - 52 70 - 56 130 - 34

GRID 1C13 1C13 1B20 1B18 1B16 1B6 1B4 1B10 1A16 1C13 1C15

WIRING AND TERMINAL KIT ..............................................

WIRING CRIMPING TOOL ..................................................

WIRING HARNESS, DUAL LEVEL MONITOR ....................

WIRING HARNESS, GRAIN TANK ......................................

WIRING HARNESS, HARVESTRAK MONITOR ..................

WIRING HARNESS, MAIN, L.H. CENTER ..........................

WIRING HARNESS, MAIN, L.H. FRONT ............................

WIRING HARNESS, R.H. MAIN ..........................................

WIRING HARNESS,CONTROL BOX,DIAL-A-MATIC ..........

WIRING STRIPPING TOOL ..................................................

WIRING, SUPPLEMENTARY TERMINALS AND CONNECTORS ................................................................

PAGE 40 - 50 40 - 50 40 - 32 40 - 30 40 - 28 40 - 18 40 - 16 40 - 22 40 - 2 40 - 50 40 - 52

130 - 38 170 - 4 130 - 8 130 - 10 130 - 20 130 - 22 130 - 12 110 - 10 170 - 4 120 - 168 120 - 164 120 - 164 120 - 168 120 - 166

V 1E13 1E23 1F1 1D20 1F4 1F5 1E19 1E14 1E13 2D5 2J1

VALVE SOLENOID CONTROL UNLOAD MODULE............ 70 - 28 VALVE, AUGER SWING, DOUBLE PILOTED, SOLENOID CONTROL VALVE ........................................ 70 - 39 VALVE, GRAIN TANK UNLOADING, DOUBLE PILOTED SOLENOID CONTROL VALVE........................ 70 - 42 VALVE, REEL DRIVE FLOW CONTROL ............................ 70 - 8 VALVE, SOLENOID CONTROL MODULE ASSEMBLY AND MOUNTINGS ............................................................ 70 - 46 VALVE, SOLENOID CONTROL MODULE ASSEMBLY AND MOUNTINGS ............................................................ 70 - 47 VALVE, SOLENOID CONTROL, CYLINDER SPEED BI-DIRECTIONAL MODULE ............................................ 70 - 35 VALVE, SOLENOID CONTROL, HEADER LIFT MODULE............................................................................ 70 - 30 VALVE, UNLOAD MODULE.................................................. 70 - 28 VARIABLE SHEAVE AND SUPPORTS, PRIMARY COUNTERSHAFT ............................................................ 120 - 62 VERTICAL AUGER LOWER GEAR CASE .......................... 130 - 30

W 2C19 2C15 2C17 1C7 1C7 1D10

10-12

WALKERS, STRAW .............................................................. 120 - 52 WALKERS, STRAW ( -1990).......................................................................... 120 - 48 WALKERS, STRAW, BEARING CONVERSION ( -1990).......................................................................... 120 - 50 WEATHERPACK CONNECTORS ........................................ 40 - 44 WEATHERPACK TERMINALS.............................................. 40 - 44 WHEEL, SPINDLE, AND HOUSING .................................... 50 - 19 9501 PULL-TYPE COMBINE PC2310

(01-DEC-94) PN=12

FC: 0000 ELECTRICAL MEMORANDA

9501 PULL-TYPE COMBINE PC2310

(01-DEC-94)

40-1

PN=13

1A16

FC: 5285 ELECTRICAL

CONTROL BOX HOUSING, MOUNTING BRACKETS AND HARNESS (DIAL-A-MATIC) HP4119

40-2

-UN-01JAN94

THIS PARTS LISTING IS CONTINUED 9501 PULL-TYPE COMBINE PC2310

(01-DEC-94) PN=14

FC: 5285

1A17

ELECTRICAL CONTROL BOX HOUSING, MOUNTING BRACKETS AND HARNESS - CONTINUED (DIAL-A-MATIC) KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

PART NO.

AH200282 AH200470 AH200649 RE39122 R100373 19H1948 12H302 14H786 M45937 AH133896 AH200468 H113196 R44302 AH200818 AH200651 AH200471 T16464 14H812 H101161 H101317 T26955 C12152 H115318 19H1948 37H27

PART NAME

WIRING HARNESS WIRING HARNESS BRACKET ADAPTER PLATE CAP SCREW LOCK WASHER NUT ELBOW FITTING SWITCH WIRING HARNESS TIE BAND TIE BAND GROMMET GROMMET COVER LOCK NUT NUT BRACKET EYEBOLT CLAMP U-BOLT HANGER CAP SCREW SCREW

9501 PULL-TYPE COMBINE PC2310

(01-DEC-94)

QTY

1 1 1 1 1 6 6 6 1 1 1 6 6 1 1 1 2 2 1 1 1 1 1 2 6

SERIAL NO.

REMARKS

2860 MM FOR ROW-CROP TRACTORS 7400 MM FOR 4-WHEEL DRIVE TRACTORS

1/4" X 3/4" 1/4" 1/4"

7.925 MM (5/16") 3/8"

(SUB N33920) 1/4" X 3/4" 5/16" X 7/8"

40-3

PN=15

1A18

FC: 5285 ELECTRICAL

MAIN CONTROL BOX HP4104

40-4

-UN-01JAN94

THIS PARTS LISTING IS CONTINUED 9501 PULL-TYPE COMBINE PC2310

(01-DEC-94) PN=16

FC: 5285

1A19

ELECTRICAL MAIN CONTROL BOX - CONTINUED KEY

PART NO.

PART NAME

QTY

1 2 3 4 5 6 7 8 9 10 11

AH126811 H106246 R65044 37H153 AH200746 AH200753 AH200743 37H148 AH200744 R67211 AH200646

KNOB LOCK NUT NUT SCREW PLATE DIGITAL DISPLAY HOUSING SCREW BASE BRACKET TOGGLE SWITCH

1 1 1 4 1 1 2 9 1 1 2

12 13 14 15

AH200654 AH135951 AH200653 AH200652

TOGGLE SWITCH SWITCH TOGGLE SWITCH TOGGLE SWITCH

3 1 1 2

16 17 18 19 20 21 22 23 24 25 26 27 28

AH200748 AH106612 ..................

AH200749 AH127677 AH200461 ..................

12H354 ..................

AH200462 ..................

AH200463 ..................

CABLE RELAY CLIP RELAY CIRCUIT BREAKER CIRCUIT BOARD CAP SCREW, AND NUT LOCK WASHER SPACER CIRCUIT BOARD SPACER CIRCUIT BOARD SPACER

9501 PULL-TYPE COMBINE PC2310

(01-DEC-94)

1 1 2 2 5 1 1 14 1 1 1 1 1

SERIAL NO.

REMARKS

9.525 MM (3/8") M12 0.190" X 3/8"

1/4" X 5/8" SWITCH LOCKING; HEADER ENGAGE/UNLOADING AUGER ANGAGE SWITCH MOMENTARY; HEADER LIFT/CYLINDER SPEED DIAL-A-MATIC 3 POSITION SWITCH; UNLOADING AUGER SWING 2 POSITION SWITCH; TACH. SELECT/HEADER REVERSER (SUB AH200816) POWER (SUB AH200816) 0.112" (SUB AH200816) SWITCH (SUB AH200816) DISPLAY (SUB AH200816)

NO. 4-40NC X 3/8 1/4 X 7/8 1/4 X 1-1/4 1/4 X 3/4

40-5

PN=17

1A20

FC: 5234 ELECTRICAL

HARVESTRAK MAIN CONTROL BOX HP4075

40-6

-UN-01JAN94

THIS PARTS LISTING IS CONTINUED 9501 PULL-TYPE COMBINE PC2310

(01-DEC-94) PN=18

FC: 5234

1A21

ELECTRICAL HARVESTRAK MAIN CONTROL BOX - CONTINUED KEY

1 2 3 4 5 6 7 8 9 10 11 12

PART NO.

AH120445 AH200641 H111364 AH200645 ..................

AH200755 ..................

AH125627 ..................

AH200737 H130153 ..................

PART NAME

GAUGE CONTROL CONSOLE SCREW BRACKET SCREW WIRING HARNESS SPACER CIRCUIT BOARD SPACER PLATE KNOB SCREW

9501 PULL-TYPE COMBINE PC2310

(01-DEC-94)

QTY

1 1 1 1 4 1 4 1 1 1 1 4

SERIAL NO.

REMARKS

(SUB AH200816) 8-32 X 3/8 (SUB AH200816) 4-40NC X 7/8 (SUB AH200816) 4-40NC X 1-3/4 (SUB AH200816) NO. 4-48NF X 3/8

40-7

PN=19