John Deere 914P’ BELT PICKUP WITH PLATFORM Parts Catalog Manual

A2 914P BELT PICKUP PLATFORM

H59140

-UN-30JUL99

JOHN DEERE 914P’ BELT PICKUP WITH PLATFORM

(SPECIFICATIONS AND DESIGN SUBJECT TO CHANGE WITHOUT NOTICE)

914P BELT PICKUP PLATFORM PC2772

(30-JUL-99)

5-1

PN=1

A3 914P BELT PICKUP PLATFORM

SERIAL NUMBER PLATE

USE ALL NUMBERS, LETTERS, AND SPACES SHOWN ON THE SERIAL NUMBER PLATE IN WARRANTY CORRESPONDENCE.

PICKUP PLATFORM (625001-

)

ON THESE PLATFORMS, THE SERIAL NUMBER PLATE IS LOCATED ON THE LEFT-HAND SIDE OF THE FRAME. EXAMPLE: PICKUP PLATFORM

(FIRST LINE)

(SECOND LINE)

H0 - FACTORY (HARVESTER WORKS) 0912 - PLATFORM MODEL X - CONFIGURATION/MODEL SUFFIX 625001 - PLATFORM SEQUENCE NUMBER (SERIAL NUMBER) PICKUP PLATFORM - PRODUCT TYPE

NOTE: BELT PICKUPS DO NOT HAVE SERIAL NUMBERS. CHANGES TO BELT PICKUPS ARE SHOWN BY YEARS.

IMPORTANT THIS PARTS CATALOG CONTAINS COMPLETE PARTS INFORMATION ON THE THREE-ROLLER BELT AND PICKUP PLATFORM. IT IS IMPORTANT THAT THE CORRECT SERIAL NUMBER BE USED WHEN ORDERING PARTS.

SERIAL NUMBER LISTING INFORMATION SERIAL NUMBER INFORMATION IS LISTED TO SHOW ON WHICH MACHINES EACH PART CAN BE USED, FOR EXAMPLE: THE PART CAN BE USED ON ALL MACHINES. 000000THE PART CAN BE USED ON ALL MACHINES BEGINNING WITH THE SERIAL NUMBER LISTED. -000000 THE PART CAN BE USED ON ALL MACHINES UP TO AND INCLUDING THE SERIAL NUMBER LISTED. 000000-000000 THE PART CAN BE USED ON ALL MACHINES BETWEEN AND INCLUDING THE SERIAL NUMBERS LISTED. WHEN XXXXXX’S ARE LISTED IN PLACE OF A SERIAL NUMBER, A SERIAL NUMBER CHANGE WAS MADE BUT THE EXACT SERIAL NUMBER WAS NOT AVAILABLE WHEN THE CATALOG WAS PRODUCED.

COPYRIGHT (C) 2000. DEERE & COMPANY. MOLINE, ILLINOIS ALL RIGHTS RESERVED

5-2

914P BELT PICKUP PLATFORM PC2772

(28-FEB-00) PN=2

A4 914P BELT PICKUP PLATFORM

DIRECTION ARROW ARROWS ARE USED WITH ILLUSTRATIONS TO INDICATE THE FRONT OF THE UNIT. "RIGHT-HAND" AND "LEFTHAND" SIDES ARE DETERMINED BY FACING IN THE DIRECTION OF MACHINE FORWARD TRAVEL.

BOX-ENCLOSED ILLUSTRATIONS A KEY NUMBER, SHOWN IN THE PARTS LIST, IS ASSIGNED TO A BOX ENCLOSING ALL PARTS SOLD AS A SERVICE ASSEMBLY. A BOX NOT KEYED INCLUDES NON-CURRENT PARTS.

KITS KIT INFORMATION CAN BE FOUND IMMEDIATELY AFTER THE STORY IN WHICH IT IS USED. THE ILLUSTRATION IS REPEATED WITH ONLY THE KIT PARTS CALLED OUTAND WITH ALL OTH ER PARTS SHOWN IN PHANTOM.

JDM REMANUFACTURED COMPONENTS THE SERVICE PARTS LISTED IN THIS CATALOG ARE INTENDED FOR THE REPAIR OF ORIGINAL EQUIPMENT COMPONENTS. ALTHOUGH MOST SERVICE PARTS MAY BE USED TO REPAIR REMANUFACTURED COMPONENTS, THE REMANUFACTURED DESIGN MAY CHANGE PARTS SUFFICIENTLY SO THAT SERVICE PARTS ARE INADEQUATE OR NOT USABLE.

BOLT AND CAP SCREW STRENGTH IDENTIFICATION BOLTS AND CAP SCREWS REQUIRED TO HAVE HIGH-STRENGTH QUALITIES EQUIVALENT TO SAE GRADE 8 ARE IDENTIFIED THROUGHOUT THIS CATALOG BY THE DESCRIPTION HS SAE 8. ALL STANDARD BOLTS AND CAP SCREWS ARE SAE GRADE 5 OR LOWER. BOLTS AND CAP SCREWS REQUIRED TO HAVE HIGH-STRENGTH QUALITIES EQUIVALENT TO PROPERTY CLASS 10.9 ARE IDENTIFIED THROUGHOUT THIS CATALOG BY THE DESCRIPTION HS 10.9. ALL STANDARD BOLTS AND CAP SCREWS AREPROPERTY CLASS 8.8 OR LOWER.

SI UNITS OF MEASURE METRIC DIMENSIONS ARE GIVEN, WHERE APPLICABLE, THROUGHOUT THIS PARTS CATALOG.

TRADEMARKS THROUGHOUT THIS PARTS CATALOG, YOU WILL FIND THE FOLLOWING DEERE & COMPANY TRADEMARKS: DIAL-A-SPEED™ DIAL-A-MATIC™ HARVESTRAK™

POSI-TORQ™ TORQ-GARD SUPREME® QUIK-TATCH™

CHANGE INDICATOR LINE CHANGES AFFECTING THE ORDERING OF PARTS ARE IDENTIFIED BY VERTICAL LINES MARKED IN THE L. H. MARGIN OF REVISED PARTS LISTING IMAGES. A LINE IS ALSO AT THE LEFT-HAND EDGE OF THE SAME PART NUMBER IN THE NUMERICAL INDEX TO SHOW THE LOCATION OF REVISED INFORMATION.

COMPLETE GOODS LISTINGS COMPLETE GOODS ARE IN BOLD FACE TYPE. ORDER SEPARATELY. DO NOT INCLUDE ON REPLACEMENT PARTS ORDER.

914P BELT PICKUP PLATFORM PC2772

(30-JUN-00)

5-3

PN=3

A5 914P BELT PICKUP PLATFORM

SECTION INDEX

SECTION 05 - GENERAL INFORMATION SECTION 10 - ROLLERS AND SUPPORTS SECTION 15 - FRAME, STRIPPERS, DIVIDERS AND PLATES SECTION 20 - HEADER HEIGHT CONTROL SECTION 25 - AUGER AND DRIVE SECTION 30 - HYDRAULICS SECTION 35 - IDLERS, TIGHTENERS AND SHIELDS SECTION 40 - BELTS, CHAINS, SHEAVES, SPROCKETS AND DECALS SECTION 45 - NUMERICAL INDEX

5-4

914P BELT PICKUP PLATFORM PC2772

(30-JUL-99) PN=4

Thanks very much for your reading, Want to get more information, Please click here, Then get the complete manual

NOTE: If there is no response to click on the link above, please download the PDF document first, and then click on it.

Have any questions please write to me: admin@servicemanualperfect.com

A6 914P BELT PICKUP PLATFORM ALPHABETICAL INDEX GRID

PAGE

GRID

A B17 A23 A10 B10 B11 B13 B11 B13 B13 B8 B11 B13 B3 A22

ADAPTOR, BACK SHAFT - NEW HEADS TO OLD LEVEL LAND COMBINES............................................

ADAPTOR, DIAL-A-MATIC (CONVERSION TO 16PIN CONNECTOR) ......................................................

ARMS, FINGER HOLD-DOWN ........................................

AUGER ADJUSTMENT BRACKETS................................

AUGER AND SHAFT ........................................................

AUGER BEARINGS ..........................................................

AUGER COVER ................................................................

AUGER CRANK ................................................................

AUGER FINGERS ............................................................

AUGER FLIGHT EXTENSIONS ......................................

AUGER HUB ....................................................................

AUGER SHAFTS ..............................................................

AUTO BELT SPEED ........................................................

AUTOMATIC HEIGHT CONTROL SENSOR, LINKAGE AND HANGER ..............................................................

B8

20 - 2 10 - 2 25 - 3 25 - 4 25 - 6 25 - 4 25 - 6 25 - 6 25 - 1 25 - 4 25 - 6 20 - 6

A20 B15 B13 A24 A13 B3 A17 A20 B21 B24 B10 A24

25 - 1

F B13 A10 A15 A16 B8 B9 A12 A18

FINGERS, AUGER............................................................

FINGERS, HOLD-DOWN ..................................................

FLAP, STRIPPER (132" BELT PICKUP) ........................

FLAP, STRIPPER (154" BELT PICKUP) ........................

FLIGHT, AUGER, EXTENSIONS ....................................

FLIGHT, WINDROW SPREADER ....................................

FRAME, IDLER ROLLERS ..............................................

FRAME, MAIN AND RUNNERS ......................................

25 - 6 10 - 2 15 - 1 15 - 2 25 - 1 25 - 2 10 - 4 15 - 4

G 20 - 1 A9 A20 B9

BACK SHAFT ADAPTOR - NEW HEADS TO OLD LEVEL LAND COMBINES............................................

BACK SHEETS ................................................................

BACKSHAFT ....................................................................

BEARINGS, AUGER ........................................................

BEARINGS, HEADER HEIGHT CONTROL (685056) ..............................................................

BEARINGS,CENTER AND IDLER ROLLERS DRIVE ....

BELT SPEED, AUTO ........................................................

BELTS AND FINGERS ....................................................

BOTTOM SHEET ..............................................................

BRACKET, HYDRAULIC LINES ......................................

BRACKET, HYDRAULIC MOTOR ....................................

BRACKETS, AUGER ADJUSTMENT ..............................

BRACKETS, HEADER HEIGHT CONTROL (685056) ..............................................................

EXTENSIONS, FLIGHT, AUGER ....................................

25 - 10

B B17

PAGE

E

25 - 10 15 - 6 25 - 8 25 - 6 20 - 3 10 - 5 20 - 6 15 - 3 15 - 6 30 - 1 30 - 4 25 - 3

GAUGE WHEELS ............................................................

GRAIN SLIDE....................................................................

GUSSETT, WINDROW SPREADER ................................

10 - 1 15 - 6 25 - 2

H A22 A24 B1 A10 B22 A13 B11 B21 B22 B24 B24

HANGER, AUTOMATIC HEIGHT CONTROL ..................

HEADER HEIGHT CONTROL SHAFT, BEARINGS AND BRACKETS (685056) ................................

HEADER HEIGHT CONTROL WIRING HARNESS ........

HOLD-DOWN FINGERS ..................................................

HOSES, HYDRAULIC ......................................................

HOUSINGS, BEARINGS, IDLER DRIVE ROLLER..........

HUB, AUGER ....................................................................

HYDRAULIC LINES AND BRACKET ..............................

HYDRAULIC LINES AND HOSES ..................................

HYDRAULIC MOTOR COUPLER ....................................

HYDRAULIC MOTOR MOUNTING BRACKET ................

20 - 1 20 - 3 20 - 4 10 - 2 30 - 2 10 - 5 25 - 4 30 - 1 30 - 2 30 - 4 30 - 4

20 - 3

I C A12 B19 A12 C4 B21 B24 B11 B13

CABLE, STORAGE, POWER SHAFT ..............................

CENTER DRIVE................................................................

CHAIN, DRIVE, ON R.H. SIDE ........................................

COUPLER, BRACKET, HYDRAULIC LINES ..................

COUPLER, HYDRAULIC MOTOR....................................

COVER, AUGER ..............................................................

CRANK, AUGER ..............................................................

25 - 12 10 - 4 40 - 1 30 - 1 30 - 4 25 - 4 25 - 6

IDLER ROLLERS ..............................................................

10 - 4

L B5 B6 B21 B22 A22

LIGHTS, MARKER ............................................................

LIGHTS, STUBBLE ..........................................................

LINES, HYDRAULIC ........................................................

LINES, HYDRAULIC ........................................................

LINKAGE, AUTOMATIC HEIGHT CONTROL..................

20 - 8 20 - 9 30 - 1 30 - 2 20 - 1

D C5 A23 B1 B1 B1 C4 B18 A12

DECALS (685151) ..................................................

DIAL-A-MATIC SENSING BOX (FOR CONVERSION TO 16-PIN CONNECTOR) ..........................................

DIAL-A-MATIC WIRING HARNESS ................................

DIAL-A-MATIC, HEADER HEIGHT CONTROL................

DIAL-A-SPEED CONTROL ..............................................

DRIVE CHAIN ON RIGHT-HAND SIDE ..........................

DRIVE SHAFT, MAIN ......................................................

DRIVE, CENTER ..............................................................

914P BELT PICKUP PLATFORM PC2772

(30-JUN-00)

M

40 - 2 20 - 2 20 - 4 20 - 4 20 - 4 40 - 1 25 - 11 10 - 4

B18 A18 B5 B24 B24 B23 A23

MAIN DRIVE SHAFT ........................................................

MAIN FRAME AND RUNNERS........................................

MARKER LIGHTS ............................................................

MOTOR, COUPLER..........................................................

MOTOR, MOUNTING BRACKET ....................................

MOTOR, REEL (EATON)..................................................

MOUNTING, SENSING BOX, DIAL-A-MATIC (FOR CONVERSION TO 16-PIN CONNECTOR)..................

25 - 11 15 - 4 20 - 8 30 - 4 30 - 4 30 - 3 20 - 2

5-5

PN=5

A7 914P BELT PICKUP PLATFORM ALPHABETICAL INDEX - CONTINUED GRID

PAGE

GRID

PAGE

P B22 A11 B19

PICKUP DRIVE ................................................................

PICKUP SHIELDS ............................................................

POWER SHAFT STORAGE CABLE ASSEMBLY ..........

30 - 2 10 - 3 25 - 12

R B23 A10 A12 A18

REEL MOTOR (EATON) ..................................................

RETAINER, HOLD-DOWN FINGERS ..............................

ROLLERS, IDLER ............................................................

RUNNERS AND MAIN FRAME........................................

30 - 3 10 - 2 10 - 4 15 - 4

S A23 A22 B11 A24 B18 B13 A20 A20 C2 A11 B3 C4 A13 B19 A20 A15 A16 A15 A16 B6 A9 A18

SENSING BOX, DIAL-A-MATIC (CONVERSION TO 16-PIN CONNECTOR) ..........................................

SENSOR, AUTOMATIC HEIGHT CONTROL ..................

SHAFT AND AUGER ........................................................

SHAFT, HEADER HEIGHT CONTROL (685056) ..............................................................

SHAFT, MAIN DRIVE ......................................................

SHAFTS, AUGER..............................................................

SHEET, BOTTOM ............................................................

SHEETS, BACK ................................................................

SHIELD ..............................................................................

SHIELDS, PICKUP............................................................

SPEED, AUTO BELT ........................................................

SPROCKETS AND TIGHTENERS ON R.H. SIDE ..........

SPROCKETS,CENTER AND IDLER ROLLERS DRIVE STORAGE CABLE, POWER SHAFT ..............................

STRIPPER ........................................................................

STRIPPER (132" BELT PICKUP) ....................................

STRIPPER (154" BELT PICKUP) ....................................

STRIPPER FLAP (132" BELT PICKUP) ..........................

STRIPPER FLAP (154" BELT PICKUP) ..........................

STUBBLE LIGHTS ............................................................

SUPPORT, YOKE ............................................................

SUPPORTS, MAIN FRAME..............................................

20 - 2 20 - 1 25 - 4 20 - 3 25 - 11 25 - 6 15 - 6 15 - 6 35 - 1 10 - 3 20 - 6 40 - 1 10 - 5 25 - 12 15 - 6 15 - 1 15 - 2 15 - 1 15 - 2 20 - 9 10 - 1 15 - 4

T C4

TIGHTENERS AND SPROCKETS ON R.H. SIDE ..........

40 - 1

W A9 A9 B9 A23 B1

WHEEL YOKE ..................................................................

WHEELS, GAUGE ............................................................

WINDROW SPREADER FLIGHT ....................................

WIRING HARNESS, ADAPTOR, DIAL-A-MATIC (F OR CONVERSION TO 16-PIN CONNECTOR) ..........

WIRING HARNESS, HEADER HEIGHT CONTROL ......

10 - 1 10 - 1 25 - 2 20 - 2 20 - 4

Y A9

5-6

YOKE SUPPORT ..............................................................

10 - 1

914P BELT PICKUP PLATFORM PC2772

(30-JUN-00) PN=6

A9 ROLLERS AND SUPPORTS GAUGE WHEELS (R.H. ILLUSTRATED) HP8832

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

-UN-22JUL99

PART NO.

AH132562 AH132563 03M7200 14M7299 03M7185 14M7298 19M7788 24H1347 24H1520 H111742 JD7797 E32172 AH133711 JD7829 AH133712 H139004 G6891E 19M7843 03M7197 14M7299 .................. ..................

PART NAME

SUPPORT SUPPORT BOLT FLANGE NUT BOLT FLANGE NUT SCREW WASHER WASHER SLEEVE LUBRICATION FITTING WASHER YOKE LUBRICATION FITTING WHEEL PIN CAP SCREW BOLT FLANGE NUT TIRE TIRE

914P BELT PICKUP PLATFORM PC2772

(28-FEB-00)

QTY

1 1 8 8 4 4 2 2 4 6 2 8 2 2 2 2 4 2 1 1 2 2

SERIAL NO.

REMARKS

R.H. L.H. M12 X 40 M12 M8 X 25 M8 M12 X 25 17/32" X 2" X 0.194" 1-15/32" X 2" X 0.105" STRAIGHT, 1/4" STRAIGHT, 5/16" (USE 20 X 10.00 - 8 TIRES) M16 X 35 M12 X 25 M12 (4 PLY TIRE) (6 PLY TIRE)

10-1

PN=7

A10 ROLLERS AND SUPPORTS HOLD-DOWN FINGERS AND SUPPORTS HP5560

KEY

1 2 3 4 5 6 7 8 9 ..

10-2

-UN-01JAN94

PART NO.

34H105 37M7083 H87747 H106260 H106259 AH98138 AH156408 AH132570 AH132572 19M7789 14M7299 AH132571 AH135954

a

PART NAME

SPRING PIN SCREW FINGER RETAINER RETAINER TUBE TUBE SUPPORT EXTENSION SCREW FLANGE NUT SUPPORT EXTENSION

QTY

2 AR AR 1 1 1 1 1 2 4 4 1 1

SERIAL NO.

REMARKS

1/4" X 1-1/2" M8 X 12 (132", 9 USED; 154", 10 USED) (132", 31 USED; 154", 36 USED) (132") (154") (132") (154") (R.H.) L H OR R H, TWO REQUIRED M12 X 30 M12 (L.H.) (INCLUDES AH132572, (4) 19M7789 AND (4) 14M7299)

914P BELT PICKUP PLATFORM PC2772

(30-JUN-00) PN=8

A11 ROLLERS AND SUPPORTS PICKUP SHIELDS HP5561

KEY

1 2

-UN-01JAN94

PART NO.

AH132566 AH132567 19M7775 14M7397

e

PART NAME

WINDSHIELD WINDSHIELD SCREW LOCK NUT

914P BELT PICKUP PLATFORM PC2772

QTY

1 1 12 12

(30-JUL-99)

SERIAL NO.

REMARKS

R.H. L.H. M6 X 16 M6

10-3

PN=9

A12 ROLLERS AND SUPPORTS DRIVE, CENTER, AND IDLER ROLLERS HP5563

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13

10-4

-UN-01JAN94

PART NO.

26H40 AH135591 AH135592 AH111516 AH111515 03M7186 14M7298 AH165083 AH129269 AH129270 03M7200 14M7299 AH165093 AH165089 14H809 19H2062 AH135597 AH135598 AH165082

e

PART NAME

SHAFT KEY ROLLER ROLLER ROLLER ROLLER BOLT FLANGE NUT REINFORCEMENT TUBE TUBE BOLT FLANGE NUT SHEET REINFORCEMENT NUT CAP SCREW ROLLER ROLLER SHEET

QTY

3 1 1 1 1 4 4 1 1 1 8 8 1 1 4 2 1 1 1

SERIAL NO.

REMARKS

1/4" X 2-1/8" (132") (154") (132") (154") M8 X 30 M8 (132") (154") M12 X 40 M12 L.H. L.H. 1/2" 1/2" X 4" (132") (154") R.H.

914P BELT PICKUP PLATFORM PC2772

(30-JUN-00) PN=10

A13 ROLLERS AND SUPPORTS SPROCKETS AND BEARINGS FOR DRIVE, CENTER, AND IDLER ROLLERS HP8876

KEY

1 2 3 4 5 6 7 8 9 10 11

12 13 14 15

-UN-29JUL99

PART NO.

19M7784 12H304 H135410 AH129420 22H897 JD8594 JD9397 24H1219 24H1341 H101594 JD7788 H118364 09H1611 14H813 H168232 14H809 03M7196 14M7298 H147690 19H1765 12H304 H102699

PART NAME

SCREW LOCK WASHER PRESSED FLANGED HOUSING PRESSED FLANGED HOUSING SET SCREW ECCENTRIC LOCKING COLLAR BALL BEARING WASHER WASHER HOUSING LUBRICATION FITTING CLIP BOLT NUT SCREW NUT BOLT FLANGE NUT COUPLING CAP SCREW LOCK WASHER HOUSING

914P BELT PICKUP PLATFORM PC2772

(30-JUN-00)

QTY

6 6 2 2 6 6 6 4 8 2 2 2 4 8 4 8 4 4 1 2 2 2

SERIAL NO.

REMARKS

M10 X 20 3/8" WITH GREASE FITTING 1/4" X 1/4" 7/16" X 1" X 0.083" (132") 17/32" X 15/16" X 0.060", (154")

7/16" X 1-3/4" (132") 7/16" (132") (154") 1/2", (154") M10 X 50 M8 3/8" X 1-3/4" 3/8"

10-5

PN=11

ROLLERS AND SUPPORTS MEMORANDA

10-6

THIS PARTS LISTING IS CONTINUED 914P BELT PICKUP PLATFORM PC2772

(30-JUL-99) PN=12

A15 FRAME, STRIPPERS, DIVIDERS AND PLATES STRIPPER (132" BELT PICKUP) HP5564

KEY

1 2 3 4 5 6 7 8 9 10 11

-UN-01JAN94

PART NO.

19M8040 24H1288 H85488 AH108452 H137639 19M7785 14M7296 12H302 14M7397 M80082 24H1287 03M7184 14M7298

PART NAME

SCREW WASHER FLAP STRIPPER SUPPORT SCREW FLANGE NUT LOCK WASHER LOCK NUT NUT WASHER BOLT FLANGE NUT

914P BELT PICKUP PLATFORM PC2772

(30-JUN-00)

QTY

AR AR 2 1 2 2 2 AR AR AR 1 1 1

SERIAL NO.

REMARKS

M6 X 60 9/32" X 1" X 1/16" (132") (132") (132") M10 X 25 M10 1/4" M6 6.350 MM (1/4") 9/32" X 5/8" X 0.065" M8 X 20 M8

15-1

PN=13

A16 FRAME, STRIPPERS, DIVIDERS AND PLATES STRIPPER (154" BELT PICKUP) HP5565

KEY

1 2 3 4 5 6 7 8

15-2

-UN-01JAN94

PART NO.

19M8291 H162036 AH133679 19M7785 14M7296 M84309 14M7396 H138953 03M7184 14M7298

PART NAME

SCREW FLAP BAR SCREW FLANGE NUT NUT LOCK NUT SUPPORT BOLT FLANGE NUT

QTY

15 2 1 2 2 15 15 1 2 2

SERIAL NO.

REMARKS

M8 X 35 M10 X 25 M10 M8 M8 X 20 M8

914P BELT PICKUP PLATFORM PC2772

(30-JUL-99) PN=14

A17 FRAME, STRIPPERS, DIVIDERS AND PLATES BELTS AND PLASTIC FINGERS HP869

KEY

-UN-01JAN94

PART NO.

PART NAME

QTY

1 2 3

H154675 AH147908 AH86897

PIN BELT BOLT

AR AR AR

4 5

H86248 AH147909

FINGER BELT

AR AR

914P BELT PICKUP PLATFORM PC2772

(30-JUN-00)

SERIAL NO.

REMARKS

(132"-6 USED; 154" - 7 USED) (132"-6 USED; 154"-7 USED) (132",-360 USED; AND 154",-420 USED) (10 PER CARTON) (132"-360 USED; AND 154"-420 USED) (132"- 6 USED; AND 154"-7 USED) (22" -7 UKRAINE PLATFORMS ONLY)

15-3

PN=15

A18 FRAME, STRIPPERS, DIVIDERS AND PLATES FRAME AND RUNNERS HP8833

15-4

-UN-22JUL99

THIS PARTS LISTING IS CONTINUED 914P BELT PICKUP PLATFORM PC2772

(30-JUL-99) PN=16

A19 FRAME, STRIPPERS, DIVIDERS AND PLATES FRAME AND RUNNERS - CONTINUED KEY

1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18

PART NO.

AH162258 AA21292 H148930 AH143603 19M7820 14M7299 19M7786 14M7276 AH89382 19M7812 14M7296 AH113221 AH111174 AH113222 AH111175 A50325 14M7260 H112896 37M7083 19M7784 H137143 .................. ..................

AH132905 AH132906 H134219 H134218

PART NAME

MAIN FRAME QUICK LOCK PIN PIN TUBE SCREW FLANGE NUT SCREW NUT RUNNER SCREW FLANGE NUT SUPPORT SUPPORT SUPPORT SUPPORT SCREW NUT SHIELD SCREW SCREW PLATE REINFORCEMENT PLATE PIN PIN STRIPPER STRIPPER

914P BELT PICKUP PLATFORM PC2772

(30-JUN-00)

QTY

1 4 2 2 2 2 2 2 1 4 4 1 1 1 1 2 4 1 2 4 1 1 1 1 1 1 1

SERIAL NO.

REMARKS

(132") M12 X 100 M12 (132") M10 X 30 M16 (132") M10 X 100 M10 R.H. (132") R.H. (154") L.H. (132") L.H. (154") M16 X 80 M16 M8 X 12 M10 X 20

R.H. (LATCH PIN ASSY) L.H. (LATCH PIN ASSY) LH RH

15-5

PN=17

A20 FRAME, STRIPPERS, DIVIDERS AND PLATES BACK SHEETS, BOTTOM SHEET, STRIPPER, AND GRAIN SLIDE HP3587

KEY

1 2 3 4 5 6 7 8 9

15-6

-UN-01JAN94

PART NO.

H168829 H147574 03M7184 14M7298 H147575 H92692 03M7190 14M7296 H149471 H137639 03M7184 14M7298 37H57 03M7185 14M7298

PART NAME

SHEET SHEET BOLT FLANGE NUT SUPPORT STRIPPER BOLT FLANGE NUT SHEET SUPPORT BOLT FLANGE NUT SCREW BOLT FLANGE NUT

QTY

1 1 AR AR 1 1 AR AR 1 1 AR AR 2 1 1

SERIAL NO.

REMARKS

L.H. R.H. M8 X 20 M8 R.H. L.H. M10 X 20 M10 (132") M8 X 20 M8 5/16" X 3/4" M8 X 25 M8

914P BELT PICKUP PLATFORM PC2772

(30-JUN-00) PN=18

A22 HEADER HEIGHT CONTROL AUTOMATIC HEIGHT CONTROL SENSOR, LINKAGE AND HANGER (685056) HP8864

KEY

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

-UN-30JUL99

PART NO.

H163280 03M7184 14M7298 H166313 AH159809 14M7397 H76321 H163282 AH143755 03M7221 H163281 03M7186 R112679 P48347 R41076 R26871 R86457 14M7297 21M7261 12M7060 RE69297 R111692 H156936 34H305 14M7303

e

PART NAME

HANGER BOLT FLANGE NUT LEVER LINKAGE LOCK NUT BRACKET SHIELD SHIELD BOLT BRACKET BOLT SEAL O-RING GROMMET SNAP RING SUPPORT NUT SCREW WASHER SENSOR SHAFT BRACKET SPRING PIN FLANGE NUT

914P BELT PICKUP PLATFORM PC2772

QTY

1 AR AR 1 1 2 1 1 1 4 1 1 1 1 1 1 1 2 2 2 1 1 1 1 4

(30-JUL-99)

SERIAL NO.

REMARKS

M8 X 20 M8 M6

M6 X 16 M8 X 30

M5 M5 X 45 5.300 MM

7/32" X 2" M6

20-1

PN=19