John Deere CS36, CS40, CS46,CS52, CS56, CS62, CS71, CS81 Chainsaws Service Technical Manual（TM1917）

JOHN DEERE

WORLDWIDE COMMERCIAL & CONSUMER EQUIPMENT DIVISION

Ó¿®½¸ îððè

Chainsaws CS36, CS36LE, CS40, CS40LE, CS46, CS52, CS56, CS62, CS71, CS81 TM1917 MARCH 2008

TECHNICAL MANUAL

North American Version Litho In U.s.a.

INTRODUCTION Manual Description ̸·­ ¬»½¸²·½¿´ ³¿²«¿´ ·­ ©®·¬¬»² º±® ¿² »¨°»®·»²½»¼ ¬»½¸²·½·¿² ¿²¼ ½±²¬¿·²­ ­»½¬·±²­ ¬¸¿¬ ¿®» ­°»½·º·½¿´´§ º±® ¬¸·­ °®±¼«½¬ò ׬ ·­ ¿ °¿®¬ ±º ¿ ¬±¬¿´ °®±¼«½¬ ­«°°±®¬ °®±¹®¿³ò ̸» ³¿²«¿´ ·­ ±®¹¿²·¦»¼ ­± ¬¸¿¬ ¿´´ ¬¸» ·²º±®³¿¬·±² ±² ¿ °¿®¬·½«´¿® ­§­¬»³ ·­ µ»°¬ ¬±¹»¬¸»®ò ̸» ±®¼»® ±º ¹®±«°·²¹ ·­ ¿­ º±´´±©­æ

Ì¿¾´» ±º ݱ²¬»²¬­

¡

Í°»½·º·½¿¬·±²­ ¿²¼ ײº±®³¿¬·±²

¡

×¼»²¬·º·½¿¬·±² Ò«³¾»®­

¡

̱±´­ ¿²¼ Ó¿¬»®·¿´­

¡

ݱ³°±²»²¬ Ô±½¿¬·±²

¡

ͽ¸»³¿¬·½­ ¿²¼ Ø¿®²»­­»­

¡

̸»±®§ ±º Ñ°»®¿¬·±²

¡

Ñ°»®¿¬·±² ¿²¼ Ü·¿¹²±­¬·½­

¡

Ü·¿¹²±­¬·½­

¡

Ì»­¬­ ¿²¼ ß¼¶«­¬³»²¬­

¡

λ°¿·®

¡

Ѭ¸»®

Safety Specifications and Information Engine

Note: Depending on the particular section or system being covered, not all of the above groups may be used. ̸» ¾´»»¼ ¬¿¾­ º±® ¬¸» °¿¹»­ ±º »¿½¸ ­»½¬·±² ©·´´ ¿´·¹² ©·¬¸ ¬¸» ­»½¬·±²­ ´·­¬»¼ ±² ¬¸·­ °¿¹»ò п¹» ²«³¾»®·²¹ ·­ ½±²­»½«¬·ª» º®±³ ¬¸» ¾»¹·²²·²¹ ±º ¬¸» Í¿º»¬§ ­»½¬·±² ¬¸®±«¹¸ ¬¸» ´¿­¬ ­»½¬·±²ò É» ¿°°®»½·¿¬» §±«® ·²°«¬ ±² ¬¸·­ ³¿²«¿´ò ׺ §±« º·²¼ ¿²§ »®®±®­ ±® ©¿²¬ ¬± ½±³³»²¬ ±² ¬¸» ´¿§±«¬ ±º ¬¸» ³¿²«¿´ °´»¿­» ½±²¬¿½¬ «­ò

ß´´ ·²º±®³¿¬·±²ô ·´´«­¬®¿¬·±²­ ¿²¼ ­°»½·º·½¿¬·±²­ ·² ¬¸·­ ³¿²«¿´ ¿®» ¾¿­»¼ ±² ¬¸» ´¿¬»­¬ ·²º±®³¿¬·±² ¿¬ ¬¸» ¬·³» ±º °«¾´·½¿¬·±²ò ̸» ®·¹¸¬ ·­ ®»­»®ª»¼ ¬± ³¿µ» ½¸¿²¹»­ ¿¬ ¿²§ ¬·³» ©·¬¸±«²±¬·½»ò ÝÑÐÇÎ×ÙØÌw îððè Ü»»®» ú ݱò Ö±¸² Ü»»®» ɱ®´¼©·¼» ݱ³³»®½·¿´ ¿²¼ ݱ²­«³»® Û¯«·°³»²¬ Ü·ª·­·±² ß´´ ®·¹¸¬­ ®»­»®ª»¼ Ю»ª·±«­ Û¼·¬·±²­ ÝÑÐÇÎ×ÙØÌw îððîô îððé

ײ¬®±¼«½¬·±²

Thanks very much for your reading, Want to get more information, Please click here, Then get the complete manual

NOTE: If there is no response to click on the link above, please download the PDF document first, and then click on it.

Have any questions please write to me: admin@servicemanualperfect.com

SAFETY Handle Fluids Safely - Avoid Fires

Safety

Be Prepared For Emergencies

Recognize Safety Information

̸·­ ·­ ¬¸» ­¿º»¬§ó¿´»®¬ ­§³¾±´ò ɸ»² §±« ­»» ¬¸·­ ­§³¾±´ ±² §±«® ³¿½¸·²» ±® ·² ¬¸·­ ³¿²«¿´ô ¾» ¿´»®¬ ¬± ¬¸» °±¬»²¬·¿´ º±® °»®­±²¿´ ·²¶«®§ò Ú±´´±© ®»½±³³»²¼»¼ °®»½¿«¬·±²­ ¿²¼ ­¿º» ­»®ª·½·²¹ °®¿½¬·½»­ò

Understand Signal Words ß ­·¹²¿´ ©±®¼ ó ÜßÒÙÛÎô ÉßÎÒ×ÒÙô ±® ÝßËÌ×ÑÒ ó ·­ «­»¼ ©·¬¸ ¬¸» ­¿º»¬§ó¿´»®¬ ­§³¾±´ò ÜßÒÙÛÎ ·¼»²¬·º·»­ ¬¸» ³±­¬ ­»®·±«­ ¸¿¦¿®¼­ò ÜßÒÙÛÎ ±® ÉßÎÒ×ÒÙ ­¿º»¬§ ­·¹²­ ¿®» ´±½¿¬»¼ ²»¿® ­°»½·º·½ ¸¿¦¿®¼­ò Ù»²»®¿´ °®»½¿«¬·±²­ ¿®» ´·­¬»¼ ±² ÝßËÌ×ÑÒ ­¿º»¬§ ­·¹²­ò ÝßËÌ×ÑÒ ¿´­± ½¿´´­ ¿¬¬»²¬·±² ¬± ­¿º»¬§ ³»­­¿¹»­ ·² ¬¸·­ ³¿²«¿´ò

Replace Safety Signs

¡ ɸ»² §±« ©±®µ ¿®±«²¼ º«»´ô ¼± ²±¬ ­³±µ» ±® ©±®µ ²»¿® ¸»¿¬»®­ ±® ±¬¸»® º·®» ¸¿¦¿®¼­ò ¡ ͬ±®» º´¿³³¿¾´» º´«·¼­ ¿©¿§ º®±³ º·®» ¸¿¦¿®¼­ò ܱ ²±·²½·²»®¿¬» ±® °«²½¬«®» °®»­­«®·¦»¼ ½±²¬¿·²»®­ò ¡ Ó¿µ» ­«®» ³¿½¸·²» ·­ ½´»¿² ±º ¬®¿­¸ô ¹®»¿­»ô ¿²¼ ¼»¾®·­ò ¡ ܱ ²±¬ ­¬±®» ±·´§ ®¿¹­å ¬¸»§ ½¿² ·¹²·¬» ¿²¼ ¾«®² ­°±²¬¿²»±«­´§ò ¡

Þ» °®»°¿®»¼ ·º ¿ º·®» ­¬¿®¬­ò

¡

Õ»»° ¿ º·®­¬ ¿·¼ µ·¬ ¿²¼ º·®» »¨¬·²¹«·­¸»® ¸¿²¼§ò

¡ Õ»»° »³»®¹»²½§ ²«³¾»®­ º±® ¼±½¬±®­ô ¿³¾«´¿²½» ­»®ª·½»ô ¸±­°·¬¿´ô ¿²¼ º·®» ¼»°¿®¬³»²¬ ²»¿® §±«® ¬»´»°¸±²»ò

Wear Protective Clothing

λ°´¿½» ³·­­·²¹ ±® ¼¿³¿¹»¼ ­¿º»¬§ ­·¹²­ò Í»» ¬¸» ³¿½¸·²» ±°»®¿¬±® ­ ³¿²«¿´ º±® ½±®®»½¬ ­¿º»¬§ ­·¹² °´¿½»³»²¬ò

É»¿® ½´±­» º·¬¬·²¹ ½´±¬¸·²¹ ¿²¼ ­¿º»¬§ »¯«·°³»²¿°°®±°®·¿¬» ¬± ¬¸» ¶±¾ò

Í¿º»¬§ ó ï

SAFETY Ю±´±²¹»¼ »¨°±­«®» ¬± ´±«¼ ²±·­» ½¿² ½¿«­» ·³°¿·®³»²¬ ±® ´±­­ ±º ¸»¿®·²¹ò É»¿® ¿ ­«·¬¿¾´» ¸»¿®·²¹ °®±¬»½¬·ª» ¼»ª·½» ­«½¸ ¿­ »¿®³«ºº­ ±® »¿®°´«¹­ ¬± °®±¬»½¬ ¿¹¿·²­±¾¶»½¬·±²¿¾´» ±® «²½±³º±®¬¿¾´» ´±«¼ ²±·­»­ò Ñ°»®¿¬·²¹ »¯«·°³»²¬ ­¿º»´§ ®»¯«·®»­ ¬¸» º«´´ ¿¬¬»²¬·±² ±º ¬¸» ±°»®¿¬±®ò ܱ ²±¬ ©»¿® ®¿¼·± ±® ³«­·½ ¸»¿¼°¸±²»­ ©¸·´» ±°»®¿¬·²¹ ³¿½¸·²»ò

Using High Pressure Washers Ü·®»½¬·²¹ °®»­­«®·¦»¼ ©¿¬»® ¿¬ »´»½¬®±²·½ñ»´»½¬®·½¿´ ½±³°±²»²¬­ ±® ½±²²»½¬±®­ô ¾»¿®·²¹­ô ¸§¼®¿«´·½ ­»¿´­ô º«»´ ·²¶»½¬·±² °«³°­ ±® ±¬¸»® ­»²­·¬·ª» °¿®¬­ ¿²¼ ½±³°±²»²¬­ ³¿§ ½¿«­» °®±¼«½¬ ³¿´º«²½¬·±²­ò λ¼«½» °®»­­«®» ¿²¼ ­°®¿§ ¿¬ ¿ ìë ¬± çð ¼»¹®»» ¿²¹´»ò

Illuminate Work Area Safely

Service Machines Safely

×´´«³·²¿¬» §±«® ©±®µ ¿®»¿ ¿¼»¯«¿¬»´§ ¾«¬ ­¿º»´§ò Ë­» ¿ °±®¬¿¾´» ­¿º»¬§ ´·¹¸¬ º±® ©±®µ·²¹ ·²­·¼» ¬¸» ³¿½¸·²»ò Ó¿µ» ­«®» ¬¸» ¾«´¾ ·­ »²½´±­»¼ ¾§ ¿ ©·®» ½¿¹»ò ̸» ¸±¬ º·´¿³»²±º ¿² ¿½½·¼»²¬¿´´§ ¾®±µ»² ¾«´¾ ½¿² ·¹²·¬» ­°·´´»¼ º«»´ ±® ±·´ò

Work In Ventilated Area

Ì·» ´±²¹ ¸¿·® ¾»¸·²¼ §±«® ¸»¿¼ò ܱ ²±¬ ©»¿® ¿ ²»½µ¬·»ô ­½¿®ºô ´±±­» ½´±¬¸·²¹ô ±® ²»½µ´¿½» ©¸»² §±« ©±®µ ²»¿® ³¿½¸·²» ¬±±´­ ±® ³±ª·²¹ °¿®¬­ò ׺ ¬¸»­» ·¬»³­ ©»®» ¬± ¹»½¿«¹¸¬ô ­»ª»®» ·²¶«®§ ½±«´¼ ®»­«´¬ò λ³±ª» ®·²¹­ ¿²¼ ±¬¸»® ¶»©»´®§ ¬± °®»ª»²¬ »´»½¬®·½¿´ ­¸±®¬­ ¿²¼ »²¬¿²¹´»³»²¬ ·² ³±ª·²¹ °¿®¬­ò

Use Proper Tools Ë­» ¬±±´­ ¿°°®±°®·¿¬» ¬± ¬¸» ©±®µò Ó¿µ»­¸·º¬ ¬±±´­ ¿²¼ °®±½»¼«®»­ ½¿² ½®»¿¬» ­¿º»¬§ ¸¿¦¿®¼­ò Ë­» °±©»® ¬±±´­ ±²´§ ¬± ´±±­»² ¬¸®»¿¼»¼ °¿®¬­ ¿²¼ º¿­¬»²»®­ò Ú±® ´±±­»²·²¹ ¿²¼ ¬·¹¸¬»²·²¹ ¸¿®¼©¿®»ô «­» ¬¸» ½±®®»½¬ ­·¦» ¬±±´­ò DO NOT «­» ËòÍò ³»¿­«®»³»²¬ ¬±±´­ ±² ³»¬®·½ º¿­¬»²»®­ò ߪ±·¼ ¾±¼·´§ ·²¶«®§ ½¿«­»¼ ¾§ ­´·°°·²¹ ©®»²½¸»­ò Ë­» ±²´§ ­»®ª·½» °¿®¬­ ³»»¬·²¹ Ö±¸² Ü»»®» ­°»½·º·½¿¬·±²­ò Before working on the machine:

Û²¹·²» »¨¸¿«­¬ º«³»­ ½¿² ½¿«­» ­·½µ²»­­ ±® ¼»¿¬¸ò ׺ ·¬ ·­ ²»½»­­¿®§ ¬± ®«² ¿² »²¹·²» ·² ¿² »²½´±­»¼ ¿®»¿ô ®»³±ª» ¬¸» »¨¸¿«­¬ º«³»­ º®±³ ¬¸» ¿®»¿ ¾§ ±°»²·²¹ ¼±±®­ ¬± ¹»±«¬­·¼» ¿·® ·²¬± ¬¸» ¿®»¿ò

Warning: California Proposition 65 Warning Ù¿­±´·²» »²¹·²» »¨¸¿«­¬ º®±³ ¬¸·­ °®±¼«½¬ ½±²¬¿·²­ ½¸»³·½¿´­ µ²±©² ¬± ¬¸» ͬ¿¬» ±º Ý¿´·º±®²·¿ ¬± ½¿«­» ½¿²½»®ô ¾·®¬¸ ¼»º»½¬­ô ±® ±¬¸»® ®»°®±¼«½¬·ª» ¸¿®³ò

ïò Ô±©»® ¿´´ »¯«·°³»²¬ ¬± ¬¸» ¹®±«²¼ò

Remove Paint Before Welding or Heating

îò ͬ±° ¬¸» »²¹·²»

ߪ±·¼ °±¬»²¬·¿´´§ ¬±¨·½ º«³»­ ¿²¼ ¼«­¬ò Ø¿¦¿®¼±«­ º«³»­ ½¿² ¾» ¹»²»®¿¬»¼ ©¸»² °¿·²¬ ·­ ¸»¿¬»¼ ¾§ ©»´¼·²¹ô ­±´¼»®·²¹ô ±® «­·²¹ ¿ ¬±®½¸ò ܱ ¿´´ ©±®µ ±«¬­·¼» ±® ·² ¿ ©»´´ ª»²¬·´¿¬»¼ ¿®»¿ò Ü·­°±­» ±º °¿·²¬ ¿²¼ ­±´ª»²¬ °®±°»®´§ò λ³±ª» °¿·²¬ ¾»º±®» ©»´¼·²¹ ±® ¸»¿¬·²¹æ ׺ §±« ­¿²¼ ±® ¹®·²¼ °¿·²¬ô ¿ª±·¼ ¾®»¿¬¸·²¹ ¬¸» ¼«­¬ò É»¿® ¿² ¿°°®±ª»¼ ®»­°·®¿¬±®ò ׺ §±« «­» ­±´ª»²¬ ±® °¿·²¬ ­¬®·°°»®ô ®»³±ª» ­¬®·°°»® ©·¬¸ ­±¿° ¿²¼ ©¿¬»® ¾»º±®» ©»´¼·²¹ò λ³±ª» ­±´ª»²¬ ±® °¿·²¬ ­¬®·°°»® ½±²¬¿·²»®­ ¿²¼ ±¬¸»® º´¿³³¿¾´» ³¿¬»®·¿´ º®±³ ¿®»¿ò ß´´±© º«³»­ ¬± ¼·­°»®­» ¿¬ ´»¿­¬ ïë ³·²«¬»­ ¾»º±®» ©»´¼·²¹ ±® ¸»¿¬·²¹ò

íò Ø¿²¹ ¿ ÜÑ ÒÑÌ ÑÐÛÎßÌÛ ¬¿¹ ·² ±°»®¿¬±® ­¬¿¬·±²ò

Work In Clean Area Before starting a job: ïò Ý´»¿² ©±®µ ¿®»¿ ¿²¼ ³¿½¸·²»ò îò Ó¿µ» ­«®» §±« ¸¿ª» ¿´´ ²»½»­­¿®§ ¬±±´­ ¬± ¼± §±«® ¶±¾ò íò Ø¿ª» ¬¸» ®·¹¸¬ °¿®¬­ ±² ¸¿²¼ò ìò λ¿¼ ¿´´ ·²­¬®«½¬·±²­ ¬¸±®±«¹¸´§å ¼± ²±¬ ¿¬¬»³°­¸±®¬½«¬­ò

Í¿º»¬§ ó î

SAFETY Dispose of Waste Properly

Avoid Injury From Rotating Blades

׳°®±°»®´§ ¼·­°±­·²¹ ±º ©¿­¬» ½¿² ¬¸®»¿¬»² ¬¸» »²ª·®±²³»²¬ ¿²¼ »½±´±¹§ò ᬻ²¬·¿´´§ ¸¿®³º«´ ©¿­¬» «­»¼ ©·¬¸ Ö±¸² Ü»»®» »¯«·°³»²¬ ·²½´«¼» ­«½¸ ·¬»³­ ¿­ ±·´ô º«»´ô ½±±´¿²¬ô ¾®¿µ» º´«·¼ô º·´¬»®­ô ¿²¼ ¾¿¬¬»®·»­ò Ë­» ´»¿µ°®±±º ½±²¬¿·²»®­ ©¸»² ¼®¿·²·²¹ º´«·¼­ò ܱ ²±¬ «­» º±±¼ ±® ¾»ª»®¿¹» ½±²¬¿·²»®­ ¬¸¿¬ ³¿§ ³·­´»¿¼ ­±³»±²» ·²¬± ¼®·²µ·²¹ º®±³ ¬¸»³ò ܱ ²±¬ °±«® ©¿­¬» ±²¬± ¬¸» ¹®±«²¼ô ¼±©² ¿ ¼®¿·²ô ±® ·²¬± ¿²§ ©¿¬»® ­±«®½»ò ײ¯«·®» ±² ¬¸» °®±°»® ©¿§ ¬± ®»½§½´» ±® ¼·­°±­» ±º ©¿­¬» º®±³ §±«® ´±½¿´ »²ª·®±²³»²¬¿´ ±® ®»½§½´·²¹ ½»²¬»®ô ±® º®±³ §±«® Ö±¸² Ü»»®» ¼»¿´»®ò

Live With Safety Õ»»° ¸¿²¼­ ¿²¼ º»»¬ ¿©¿§ ©¸·´» ³¿½¸·²» ·­ ®«²²·²¹ò ͸«±ºº °±©»® ¬± ­»®ª·½»ô ´«¾®·½¿¬»ô ±® ®»³±ª» ¾´¿¼»­ò

Handle Chemical Products Safely

Ü·®»½¬ »¨°±­«®» ¬± ¸¿¦¿®¼±«­ ½¸»³·½¿´­ ½¿² ½¿«­» ­»®·±«­ ·²¶«®§ò ᬻ²¬·¿´´§ ¸¿¦¿®¼±«­ ½¸»³·½¿´­ «­»¼ ©·¬¸ Ö±¸² Ü»»®» »¯«·°³»²¬ ·²½´«¼» ­«½¸ ·¬»³­ ¿­ ´«¾®·½¿²¬­ô ½±±´¿²¬­ô °¿·²¬­ô ¿²¼ ¿¼¸»­·ª»­ò

Þ»º±®» ®»¬«®²·²¹ ³¿½¸·²» ¬± ½«­¬±³»®ô ³¿µ» ­«®» ³¿½¸·²» ·­ º«²½¬·±²·²¹ °®±°»®´§ô »­°»½·¿´´§ ¬¸» ­¿º»¬§ ­§­¬»³­ò ײ­¬¿´´ ¿´´ ¹«¿®¼­ ¿²¼ ­¸·»´¼­ò

ß Ó¿¬»®·¿´ Í¿º»¬§ Ü¿¬¿ ͸»»¬ øÓÍÜÍ÷ °®±ª·¼»­ ­°»½·º·½ ¼»¬¿·´­ ±² ½¸»³·½¿´ °®±¼«½¬­æ °¸§­·½¿´ ¿²¼ ¸»¿´¬¸ ¸¿¦¿®¼­ô ­¿º»¬§ °®±½»¼«®»­ô ¿²¼ »³»®¹»²½§ ®»­°±²­» ¬»½¸²·¯«»­ò ݸ»½µ ¬¸» ÓÍÜÍ ¾»º±®» §±« ­¬¿®¬ ¿²§ ¶±¾ «­·²¹ ¿ ¸¿¦¿®¼±«­ ½¸»³·½¿´ò ̸¿¬ ©¿§ §±« ©·´´ µ²±© »¨¿½¬´§ ©¸¿¬¸» ®·­µ­ ¿®» ¿²¼ ¸±© ¬± ¼± ¬¸» ¶±¾ ­¿º»´§ò ̸»² º±´´±© °®±½»¼«®»­ ¿²¼ ®»½±³³»²¼»¼ »¯«·°³»²¬ò

Í¿º»¬§ ó í

SAFETY

Í¿º»¬§ ó ì

SPECIFICATIONS AND INFORMATION TABLE OF CONTENTS Table of Contents Í°»½·º·½¿¬·±²­ ¿²¼ ײº±®³¿¬·±²

Fastener Torques..............................................7 Ó»¬®·½ Ú¿­¬»²»® ̱®¯«» Ê¿´«»­ òòòòòòòòòòòòòòòòòòòòòòé ײ½¸ Ú¿­¬»²»® ̱®¯«» Ê¿´«»­ òòòòòòòòòòòòòòòòòòòòòòòòòè General Information..........................................9 îóݧ½´» Û²¹·²»­ òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòç Ù¿­±´·²» ͬ±®¿¹»òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòïð îóݧ½´» Ù¿­±´·²» Û²¹·²» Ñ·´ òòòòòòòòòòòòòòòòòòòòòòòòïð ß´¬»®²¿¬·ª» Ô«¾®·½¿²¬­òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòïð ͧ²¬¸»¬·½ Ô«¾®·½¿²¬­ òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòïï Ó·¨·²¹ Ѻ Ô«¾®·½¿²¬­òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòïï Identification Numbers...................................11 Ó±¼»´ ÝÍíê ¿²¼ ÝÍìðòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòïï Ó±¼»´ ÝÍíêÔÛ ¿²¼ ÝÍìðÔÛòòòòòòòòòòòòòòòòòòòòòòòòïï Ó±¼»´ ÝÍìê ¿²¼ ÝÍëîòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòïî Ó±¼»´ ÝÍëê ¿²¼ ÝÍêîòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòïî Ó±¼»´ ÝÍéï ¿²¼ ÝÍèïòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòïî

Í°»½·º·½¿¬·±²­ ¿²¼ ײº±®³¿¬·±² Ì¿¾´» ±º ݱ²¬»²¬­ ó ë

SPECIFICATIONS AND INFORMATION TABLE OF CONTENTS

Í°»½·º·½¿¬·±²­ ¿²¼ ײº±®³¿¬·±² Ì¿¾´» ±º ݱ²¬»²¬­ ó ê

SPECIFICATIONS AND INFORMATION FASTENER TORQUES Fastener Torques Metric Fastener Torque Values 4.8

10.9

4.8

8.8

9.8

10.9

12.9

4.8

8.8

9.8

10.9

12.9

10

5

10 10

10

12.9 12

10

10

5 5

Property Class and Nut Markings

9.8

12

Property Class and Head Markings

12.9

8.8

12

Ý´¿­­ ìòè

Ý´¿­­ èòè ±® çòè

Ý´¿­­ ïðòç

Ý´¿­­ ïîòç

Ô«¾®·½¿¬»¼ ¿ Ü®§ ¿

Ô«¾®·½¿¬»¼ ¿ Ü®§ ¿

Ô«¾®·½¿¬»¼ ¿

Ü®§ ¿

Ô«¾®·½¿¬»¼ ¿ Ü®§ ¿

Í×ÆÛ

Ò¡³

´¾óº¬

Ò¡³

´¾óº¬

Ò¡³

´¾óº¬

Ò¡³

´¾óº¬

Ò¡³

´¾óº¬

Ò¡³

´¾óº¬

Ò¡³

´¾óº¬

Ò¡³

´¾óº¬

Óê

ìòè

íòë

ê

ìòë

ç

êòë

ïï

èòë

ïí

çòë

ïé

ïî

ïë

ïïòë

ïç

ïìòë

Óè

ïî

èòë

ïë

ïï

îî

ïê

îè

îð

íî

îì

ìð

íð

íé

îè

ìé

íë

Óïð

îí

ïé

îç

îï

ìí

íî

ëë

ìð

êí

ìé

èð

êð

éë

ëë

çë

éð

Óïî

ìð

îç

ëð

íé

éë

ëë

çë

éð

ïïð

èð

ïìð

ïðë

ïíð

çë

ïêë

ïîð

Óïì

êí

ìé

èð

êð

ïîð

èè

ïëð

ïïð

ïéë

ïíð

îîë

ïêë

îðë

ïëð

îêð

ïðç

Óïê

ïðð

éí

ïîë

çî

ïçð

ïìð

îìð

ïéë

îéë

îðð

íëð

îîë

íîð

îìð

ìðð

íðð

Óïè

ïíë

ïðð

ïéë

ïîë

îêð

ïçë

ííð

îëð

íéë

îéë

ìéë

íëð

ììð

íîë

ëêð

ìïð

Óîð

ïçð

ïìð

îìð

ïèð

íéë

îéë

ìéë

íëð

ëíð

ìðð

êéë

ëðð

êîë

ìêð

èðð

ëèð

Óîî

îêð

ïçð

ííð

îëð

ëïð

íéë

êëð

ìéë

éîë

ëìð

çîë

êéë

èëð

êîë

ïðéë èðð

Óîì

ííð

îëð

ìîë

íïð

êëð

ìéë

èîë

êðð

çîë

êéë

ïïëð

èëð

ïðéë

èðð

ïíëð ïððð

Óîé

ìçð

íêð

êîë

ìëð

çëð

éðð

ïîðð èéë

ïíëð

ïððð ïéðð

ïîëð ïêðð

ïïëð îððð ïëðð

Óíð

êéë

ìçð

èëð

êîë

ïíðð çëð

ïêëð ïîðð ïèëð

ïíëð îíðð

ïéðð îïëð

ïêðð îéðð îððð

Óíí

çðð

êéë

ïïëð èëð

ïéëð ïíðð îîðð ïêëð îëðð

ïèëð íïëð

îíëð îçðð

îïëð íéðð îéëð

Óíê

ïïëð

èëð

ïìëð ïðéë îîëð ïêëð îèëð îïðð íîðð

îíëð ìðëð

íððð íéëð

îéëð ìéëð íëðð

ÜÑ ÒÑÌ «­» ¬¸»­» ¸¿²¼ ¬±®¯«» ª¿´«»­ ·º ¿ ¼·ºº»®»²¬ ¬±®¯«» ª¿´«» ±® ¬·¹¸¬»²·²¹ °®±½»¼«®» ·­ ¹·ª»² º±® ¿ ­°»½·º·½ ¿°°´·½¿¬·±²ò ̱®¯«» ª¿´«»­ ´·­¬»¼ ¿®» º±® ¹»²»®¿´ «­» ±²´§ ¿²¼ ·²½´«¼» ¿ oïðû ª¿®·¿²½» º¿½¬±®ò ݸ»½µ ¬·¹¸¬²»­­ ±º º¿­¬»²»®­ °»®·±¼·½¿´´§ò ÜÑ ÒÑÌ «­» ¿·® °±©»®»¼ ©®»²½¸»­ò

ɸ»² ¾±´¬ ¿²¼ ²«¬ ½±³¾·²¿¬·±² º¿­¬»²»®­ ¿®» «­»¼ô ¬±®¯«» ª¿´«»­ ­¸±«´¼ ¾» ¿°°´·»¼ ¬± ¬¸» ÒËÌ ·²­¬»¿¼ ±º ¬¸» ¾±´¸»¿¼ò

͸»¿® ¾±´¬­ ¿®» ¼»­·¹²»¼ ¬± º¿·´ «²¼»® °®»¼»¬»®³·²»¼ ´±¿¼­ò ß´©¿§­ ®»°´¿½» ­¸»¿® ¾±´¬­ ©·¬¸ ·¼»²¬·½¿´ ¹®¿¼»ò

¿ Lubricated means coated with a lubricant such as engine oil, or fasteners with phosphate and oil coatings.

Dry means plain or zinc plated (yellow dichromate Specification JDS117) without any lubricationò

Ú¿­¬»²»®­ ­¸±«´¼ ¾» ®»°´¿½»¼ ©·¬¸ ¬¸» ­¿³» ¹®¿¼»ò Ó¿µ» ­«®» º¿­¬»²»® ¬¸®»¿¼­ ¿®» ½´»¿² ¿²¼ ¬¸¿¬ §±« °®±°»®´§ ­¬¿®¬¸®»¿¼ »²¹¿¹»³»²¬ò ̸·­ ©·´´ °®»ª»²¬ ¬¸»³ º®±³ º¿·´·²¹ ©¸»² ¬·¹¸¬»²·²¹ò

Ì·¹¸¬»² ¬±±¬¸»¼ ±® ­»®®¿¬»¼ó¬§°» ´±½µ ²«¬­ ¬± ¬¸» º«´´ ¬±®¯«» ª¿´«»ò

λº»®»²½»æ ÖÜÍ ó Ùîððò

Í°»½·º·½¿¬·±²­ ¿²¼ ײº±®³¿¬·±² Ú¿­¬»²»® ̱®¯«»­ ó é

SPECIFICATIONS AND INFORMATION FASTENER TORQUES Inch Fastener Torque Values 5.1

5

1 or 2b

SAE Grade and Head Markings

8

5.2

8.2

No Marks

2

5

Ù®¿¼» ï

Ù®¿¼» î¾

Ù®¿¼» ëô ëòï ±® ëòî

Ù®¿¼» è ±® èòî

Ô«¾®·½¿¬»¼ ¿ Ü®§ ¿

Ô«¾®·½¿¬»¼ ¿ Ü®§ ¿

Ô«¾®·½¿¬»¼ ¿ Ü®§ ¿

Ô«¾®·½¿¬»¼ ¿ Ü®§ ¿

SAE Grade and Nut Markings

8

No Marks

Í×ÆÛ

Ò¡³

´¾óº¬

Ò¡³ ´¾óº¬ Ò¡³

´¾óº¬

Ò¡³ ´¾óº¬

Ò¡³

´¾óº¬

Ò¡³

´¾óº¬

Ò¡³

´¾óº¬

Ò¡³

´¾óº¬

ïñì

íòé

îòè

ìòé

íòë

ê

ìòë

éòë

ëòë

çòë

é

ïî

ç

ïíòë

ïð

ïé

ïîòë

ëñïê

éòé

ëòë

ïð

é

ïî

ç

ïë

ïï

îð

ïë

îë

ïè

îè

îï

íë

îê

íñè

ïì

ïð

ïé

ïí

îî

ïê

îé

îð

íë

îê

ìì

íí

ëð

íê

êí

ìê

éñïê

îî

ïê

îè

îð

íë

îê

ìì

íî

ëë

ìï

éð

ëî

èð

ëè

ïðð

éë

ïñî

íí

îë

ìî

íï

ëí

íç

êé

ëð

èë

êí

ïïð

èð

ïîð

çð

ïëð

ïïë

çñïê

ìè

íê

êð

ìë

éë

ëê

çë

éð

ïîë

çð

ïëë

ïïë

ïéë

ïíð

îîë

ïêð

ëñè

êé

ëð

èë

êî

ïðë

éè

ïíë

ïðð

ïéð

ïîë

îïë

ïêð

îïë

ïêð

íðð

îîë

íñì

ïîð

èé

ïëð

ïïð ïçð

ïìð

îìð

ïéë

íðð

îîë

íéë

îèð

ìîë

íïð

ëëð

ìðð

éñè

ïçð

ïìð

îìð

ïéë ïçð

ïìð

îìð

ïéë

ìçð

íêð

êîë

ìëð

éðð

ëðð

èéë

êëð

ï

îçð

îïð

íêð

îéð îçð

îïð

íêð

îéð

éîë

ëìð

çîë

êéë

ïðëð éëð

ïóïñè

ìéð

íðð

ëïð

íéë ìéð

íðð

ëïð

íéë

çðð

êéë

ïïëð èëð

ïóïñì

ëéð

ìîë

éîë

ëíð ëéð

ìîë

éîë

ëíð

ïíðð çëð

ïóíñè

éëð

ëëð

çëð

éðð éëð

ëëð

çëð

éðð

ïéðð ïîëð îïëð ïëëð îéðð îððð íìðð îëëð

ïóïñî

ïððð éîë

ïîëð çîë ççð

éîë

ïîëð çíð

îîëð ïêëð îèëð îïðð íêðð îêëð ìëëð ííëð

ÜÑ ÒÑÌ «­» ¬¸»­» ¸¿²¼ ¬±®¯«» ª¿´«»­ ·º ¿ ¼·ºº»®»²¬ ¬±®¯«» ª¿´«» ±® ¬·¹¸¬»²·²¹ °®±½»¼«®» ·­ ¹·ª»² º±® ¿ ­°»½·º·½ ¿°°´·½¿¬·±²ò ̱®¯«» ª¿´«»­ ´·­¬»¼ ¿®» º±® ¹»²»®¿´ «­» ±²´§ ¿²¼ ·²½´«¼» ¿ oïðû ª¿®·¿²½» º¿½¬±®ò ݸ»½µ ¬·¹¸¬²»­­ ±º º¿­¬»²»®­ °»®·±¼·½¿´´§ò ÜÑ ÒÑÌ «­» ¿·® °±©»®»¼ ©®»²½¸»­ò

ïíðð çéë

ïìëð ïðéë ïèëð ïíëð

ïêëð ïîðð îðëð ïëðð îêðð ïçëð

¸»¿¼ò Ì·¹¸¬»² ¬±±¬¸»¼ ±® ­»®®¿¬»¼ó¬§°» ´±½µ ²«¬­ ¬± ¬¸» º«´´ ¬±®¯«» ª¿´«»ò

͸»¿® ¾±´¬­ ¿®» ¼»­·¹²»¼ ¬± º¿·´ «²¼»® °®»¼»¬»®³·²»¼ ´±¿¼­ò ß´©¿§­ ®»°´¿½» ­¸»¿® ¾±´¬­ ©·¬¸ ·¼»²¬·½¿´ ¹®¿¼»ò

¿ Lubricated means coated with a lubricant such as engine oil, or fasteners with phosphate and oil coatings.

Dry means plain or zinc plated (yellow dichromate Specification JDS117) without any lubricationò

Ú¿­¬»²»®­ ­¸±«´¼ ¾» ®»°´¿½»¼ ©·¬¸ ¬¸» ­¿³» ¹®¿¼»ò Ó¿µ» ­«®» º¿­¬»²»® ¬¸®»¿¼­ ¿®» ½´»¿² ¿²¼ ¬¸¿¬ §±« °®±°»®´§ ­¬¿®¬¸®»¿¼ »²¹¿¹»³»²¬ò ̸·­ ©·´´ °®»ª»²¬ ¬¸»³ º®±³ º¿·´·²¹ ©¸»² ¬·¹¸¬»²·²¹ò

¾ Grade 2 applies for hex cap screws (Not Hex Bolts) up to 152 mm (6 in.) long. Grade 1 applies for hex cap screws over 152 mm (6 in.) long, and for all other types of bolts and screws of any length.

ɸ»² ¾±´¬ ¿²¼ ²«¬ ½±³¾·²¿¬·±² º¿­¬»²»®­ ¿®» «­»¼ô ¬±®¯«» ª¿´«»­ ­¸±«´¼ ¾» ¿°°´·»¼ ¬± ¬¸» ÒËÌ ·²­¬»¿¼ ±º ¬¸» ¾±´¬

λº»®»²½»æ ÖÜÍ ó Ùîðð

Í°»½·º·½¿¬·±²­ ¿²¼ ײº±®³¿¬·±² Ú¿­¬»²»® ̱®¯«»­ ó è

SPECIFICATIONS AND INFORMATION GENERAL INFORMATION General Information

To avoid engine damage:

½ Caution: Avoid Injury! California Proposition 65

2-Cycle Engines

Warning: Gasoline engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

½ Caution: Avoid Injury! Gasoline is HIGHLY

FLAMMABLE, handle it with care. DO NOT refuel machine while: indoors, always fill gas tank outdoors; machine is near an open flame or sparks;

½ Caution: Avoid Injury! DO NOT use METHANOL gasolines because METHANOL is harmful to the environment and to your health.

engine is running, STOP engine; engine is hot, allow it to cool sufficiently first; smoking.

Help prevent fires: fill gas tank to bottom of filler neck only; be sure fill cap is tight after fueling; keep machine clean and in good repair-free of excess grease, oil, debris, and faulty or damaged parts; clean up any gas spills IMMEDIATELY; any storage of machines with gas left in tank should be in an area that is well ventilated to prevent possible igniting of fumes by an open flame or spark, this includes any appliance with a pilot light.

To prevent fire or explosion caused by STATIC ELECTRIC DISCHARGE during fueling: ONLY use a clean, approved POLYETHYLENE PLASTIC fuel container and funnel WITHOUT any metal screen or filter.

¡ ONLY use fresh, clean, unleaded gasoline with an octane rating (anti-knock index) of; ¡ 87 or higher for models CS36, CS36LE, CS40, CS40LE, CS46, CS52, CS56, and CS62 ¡

90 or higher for models CS71 and CS81

¡ Ó·¨ ·² Ö±¸² Ü»»®» Ю»³·«³ îóݧ½´» Û²¹·²» Ñ·´ ±® ·¬­ »¯«·ª¿´»²¬ «­·²¹ ¿ ëðæï º«»´ñ±·´ ³·¨¬«®» ø­»» îóݧ½´» Ù¿­±´·²» Û²¹·²» Ñ·´ ·² ¬¸·­ ­»½¬·±²÷ò ¡ ׺ Ö±¸² Ü»»®» Ю»³·«³ îóݧ½´» Û²¹·²» Ñ·´ ±® ·¬­ »¯«·ª¿´»²¬ ×Í ÒÑÌ ¾»·²¹ «­»¼ô ³·¨ ¿´¬»®²¿¬·ª» î󽧽´» »²¹·²» ±·´ ¬± ¿ íîæï º«»´ñ±·´ ³·¨¬«®» ø­»» îóݧ½´» Ù¿­±´·²» Û²¹·²» Ñ·´ ·² ¬¸·­ ­»½¬·±²÷ò Ë­» ±º ¿´¬»®²¿¬·ª» ±¨§¹»²¿¬»¼ô ¹¿­±¸±´ ¾´»²¼»¼ô «²´»¿¼»¼ ¹¿­±´·²» ·­ ¿½½»°¬¿¾´» ¿­ ´±²¹ ¿­æ ¡ ¬¸» »¬¸§´ ±® ¹®¿·² ¿´½±¸±´ ¾´»²¼­ ÜÑ ÒÑÌ »¨½»»¼ ïðû ¾§ ª±´«³» ±® ¡ ³»¬¸§´ ¬»®¬·¿®§ ¾«¬§´ »¬¸»® øÓÌÞÛ÷ ¾´»²¼­ ÜÑ ÒÑÌ »¨½»»¼ ïëû ¾§ ª±´«³»ò

STOP ENGINE

NO HOT ENGINE

NO OPEN FLAME OR SPARK

NO SMOKING

NO STATIC ELECTRIC DISCHARGE

Í°»½·º·½¿¬·±²­ ¿²¼ ײº±®³¿¬·±² Ù»²»®¿´ ײº±®³¿¬·±² ó ç

SPECIFICATIONS AND INFORMATION GENERAL INFORMATION Gasoline Storage

The following John Deere oil is preferred:

Important: Avoid Damage! Keep all dirt, scale, water or other foreign material out of gasoline. Õ»»° ¹¿­±´·²» ­¬±®»¼ ·² ¿ ­¿º»ô °®±¬»½¬»¼ ¿®»¿ò ͬ±®¿¹» ±º ¹¿­±´·²» ·² ¿ ½´»¿²ô °®±°»®´§ ³¿®µ»¼ ø ËÒÔÛßÜÛÜ ÙßÍÑÔ×ÒÛ ÷ ÐÑÔÇÛÌØÇÔÛÒÛ ÐÔßÍÌ×Ý ½±²¬¿·²»® É×ÌØÑËÌ ¿²§ ³»¬¿´ ­½®»»² ±® º·´¬»® ·­ ®»½±³³»²¼»¼ò ÜÑ ÒÑÌ «­» ¼»ó·½»®­ ¬± ¿¬¬»³°¬ ¬± ®»³±ª» ©¿¬»® º®±³ ¹¿­±´·²» ±® ¼»°»²¼ ±² º«»´ º·´¬»®­ ¬± ®»³±ª» ©¿¬»® º®±³ ¹¿­±´·²»ò Ë­» ¿ ©¿¬»® ­»°¿®¿¬±® ·²­¬¿´´»¼ ·² ¬¸» ­¬±®¿¹» ¬¿²µ ±«¬´»¬ò ÞÛ ÍËÎÛ ¬± °®±°»®´§ ¼·­½¿®¼ «²­¬¿¾´» ±® ½±²¬¿³·²¿¬»¼ ¹¿­±´·²»ò ɸ»² ­¬±®·²¹ ³¿½¸·²» ±® ¹¿­±´·²»ô ·¬ ·­ ®»½±³³»²¼»¼ ¬¸¿¬ §±« ¿¼¼ John Deere Gasoline Conditioner and Stabilizer (TY15977) ±® ¿² »¯«·ª¿´»²¬ ¬± ¬¸» ¹¿­±´·²»ò ÞÛ ÍËÎÛ ¬± º±´´±© ¼·®»½¬·±²­ ±² ½±²¬¿·²»® ¿²¼ ¬± °®±°»®´§ ¼·­½¿®¼ »³°¬§ ½±²¬¿·²»®ò

2-Cycle Gasoline Engine Oil Note: John Deere fuel mix contains a fuel stabilizer and will stay fresh up to 30 days. Do not mix quantities larger than usable in a 30-day period. ̸·­ ³¿½¸·²» ·­ °±©»®»¼ ¾§ ¿ î󽧽´» »²¹·²» ¿²¼ ®»¯«·®»­ °®»ó³·¨·²¹ «²´»¿¼»¼ ¹¿­±´·²» ¿²¼ î󽧽´» »²¹·²» ±·´ò Ю»³·¨ ¬¸» ¹¿­±´·²» ¿²¼ »²¹·²» ±·´ ¬¸±®±«¹¸´§ ·² ¿ ½´»¿² ½±²¬¿·²»® ¿°°®±ª»¼ º±® ¹¿­±´·²»ò Ë­» «²´»¿¼»¼ ¹¿­±´·²» ·²¬»²¼»¼ º±® ¿«¬±³±¬·ª» «­» ©·¬¸ ¿² ±½¬¿²» ®¿¬·²¹ ±º èé ±® ¸·¹¸»®ò Important: Avoid Damage! Mix unleaded gasoline (87 or higher for models CS36, CS36LE, CS40, CS40LE, CS46, CS52, CS56, and CS62, or 90 or higher for models CS71 and CS81) and John Deere Premium 2-Cycle Engine Oil to a 50:1 ratio: 50:1 ratio 3.8 L (1 U.S. gal) gasoline to 77 ml (2.6 oz) oil.

50:1 ratio 4.5 L (1 Imperial gal) gasoline to 89 ml (3.0 oz) oil.

¡

ËÐðèïíè øîòê ±¦ò÷

¡

ËÐðèïìð øêòì ±¦ò÷

¡

ËÐðèïîé øïê ±¦ò÷

̸·­ ±·´ ½±²¬¿·²­ ­¬¿¾·´·¦»®­ò ̸·­ ±·´ ³»»¬­ ¿²¼ »¨½»»¼­ ×ÍÑ ÔóÛÙÜô ÖßÍÑ ÚÝ ¿²¼ ßÐ× ÌÝ ­°»½·º·½¿¬·±²­ò ̸» »²¹·²» ©¿­ ¼»­·¹²»¼ ¬± ®»¿½¸ ·¬­ ±°¬·³¿´ °»®º±®³¿²½» ±«¬°«¬ô ³¿¨·³«³ »²¼«®¿²½»ô ¿²¼ ³·²·³«³ °®»ª»²¬·ª» ³¿·²¬»²¿²½» ¾§ «­·²¹ ¬¸·­ ±·´ò Important: Avoid Damage! Do not use automotive oil, 2-cycle outboard oil or any 2-cycle oil that does not meet or exceed ISO L-EGD, JASO FC and API TC specifications.

Do not use pre-mixed gasoline from fuel service stations intended for use in mopeds, motorcycles, etc. ׺ Ö±¸² Ü»»®» Ю»³·«³ îóݧ½´» Ñ·´ ·­ ²±¬ ¿ª¿·´¿¾´» ¿¬ §±«® ¼»¿´»®­¸·°ô «­» ¿²§ ¾®¿²¼ ±º °®»³·«³ î󽧽´» »²¹·²» ±·´ ½´¿­­·º·»¼ ¿­ ¹®¿¼» ×ÍÑóÔóÛÙÜô ±® ÖßÍÑóÚÝô ±® ßÐ× ÌÝò Ë­·²¹ ¿²§ ±¬¸»® ±·´ ©·´´ ­¸±®¬»² ¬¸» »²¹·²» ´·º» ¿²¼ ·²½®»¿­» ¬¸» ®»¯«·®»¼ ³¿·²¬»²¿²½»ò ̸» ©¿®®¿²¬§ ³·¹¸¬ ¿´­± ¾» ª±·¼»¼ ¾§ «­·²¹ ¿ ´±©»® ¯«¿´·¬§ ±·´ò

Alternative Lubricants Important: Avoid Damage! Use of alternative lubricants could cause reduced life of the component or void the warranty. ݱ²¼·¬·±²­ ·² ½»®¬¿·² ¹»±¹®¿°¸·½¿´ ¿®»¿­ ±«¬­·¼» ¬¸» ˲·¬»¼ ͬ¿¬»­ ¿²¼ Ý¿²¿¼¿ ³¿§ ®»¯«·®» ¼·ºº»®»²¬ ´«¾®·½¿²®»½±³³»²¼¿¬·±²­ ¬¸¿² ¬¸» ±²»­ °®·²¬»¼ ·² ¬¸·­ ¬»½¸²·½¿´ ³¿²«¿´ ±® ¬¸» ±°»®¿¬±®ù­ ³¿²«¿´ò ݱ²­«´¬ ©·¬¸ §±«® Ö±¸² Ü»»®» Ü»¿´»®ô ±® Í¿´»­ Þ®¿²½¸ô ¬± ±¾¬¿·² ¬¸» ¿´¬»®²¿¬·ª» ´«¾®·½¿²¬ ®»½±³³»²¼¿¬·±²­ò

If John Deere Premium 2-Cycle Engine Oil or its equivalent IS NOT being used mix unleaded gasoline (87 or higher for models CS36, CS36LE, CS40, CS40LE, CS46, CS52, CS56, and CS62, or 90 or higher for models CS71 and CS81) and alternative 2-cycle engine oil to a 32:1 ratio: 32:1 ratio 3.8 L (1 U.S. gal) gasoline to 119 ml (4.0 oz) oil.

32:1 ratio 4.5 L (1 Imperial gal) gasoline to 142 ml (4.8 oz) oil. ̸» »²¹·²» ±² ¬¸»­» ³±¼»´­ ®»¯«·®»­ ¬¸» «­» ±º Ö±¸² Ü»»®» Ю»³·«³ îó ݧ½´» Û²¹·²» Ñ·´ò Í°»½·º·½¿¬·±²­ ¿²¼ ײº±®³¿¬·±² Ù»²»®¿´ ײº±®³¿¬·±² ó ïð

SPECIFICATIONS AND INFORMATION IDENTIFICATION NUMBERS Identification Numbers

Synthetic Lubricants ͧ²¬¸»¬·½ ´«¾®·½¿²¬­ ³¿§ ¾» «­»¼ ·² Ö±¸² Ü»»®» »¯«·°³»²·º ¬¸»§ ³»»¬ ¬¸» ¿°°´·½¿¾´» °»®º±®³¿²½» ®»¯«·®»³»²¬­ ø·²¼«­¬®§ ½´¿­­·º·½¿¬·±² ¿²¼ñ±® ³·´·¬¿®§ ­°»½·º·½¿¬·±²÷ ¿­ ­¸±©² ·² ¬¸·­ ³¿²«¿´ò

Model CS36 and CS40

̸» ®»½±³³»²¼»¼ ¿·® ¬»³°»®¿¬«®» ´·³·¬­ ¿²¼ ­»®ª·½» ±® ´«¾®·½¿²¬ ½¸¿²¹» ·²¬»®ª¿´­ ­¸±«´¼ ¾» ³¿·²¬¿·²»¼ ¿­ ­¸±©² ·² ¬¸» ±°»®¿¬±® ­ ³¿²«¿´ô «²´»­­ ±¬¸»®©·­» ­¬¿¬»¼ ±² ´«¾®·½¿²¬ ´¿¾»´ò ײ ¹»²»®¿´ô ¿ª±·¼ ³·¨·²¹ ¼·ºº»®»²¬ ¾®¿²¼­ô ¹®¿¼»­ ±® ¬§°»­ ±º ´«¾®·½¿²¬­ò Ó¿²«º¿½¬«®»®­ ¾´»²¼ ¿¼¼·¬·ª»­ ·² ¬¸»·® ´«¾®·½¿²¬­ ¬± ³»»¬ ½»®¬¿·² ­°»½·º·½¿¬·±²­ ¿²¼ °»®º±®³¿²½» ®»¯«·®»³»²¬­ò Ó·¨·²¹ ¼·ºº»®»²¬ ´«¾®·½¿²¬­ ½¿² ·²¬»®º»®» ©·¬¸ ¬¸» °®±°»® º«²½¬·±²·²¹ ±º ¬¸»­» ¿¼¼·¬·ª»­ ¿²¼ ´«¾®·½¿²°®±°»®¬·»­ ©¸·½¸ ©·´´ ¼±©²¹®¿¼» ¬¸»·® ·²¬»²¼»¼ ­°»½·º·»¼ °»®º±®³¿²½»ò A

Mixing Of Lubricants ײ ¹»²»®¿´ô ¿ª±·¼ ³·¨·²¹ ¼·ºº»®»²¬ ¾®¿²¼­ô ¹®¿¼»­ ±® ¬§°»­ ±º ´«¾®·½¿²¬­ò Ó¿²«º¿½¬«®»®­ ¾´»²¼ ¿¼¼·¬·ª»­ ·² ¬¸»·® ´«¾®·½¿²¬­ ¬± ³»»¬ ½»®¬¿·² ­°»½·º·½¿¬·±²­ ¿²¼ °»®º±®³¿²½» ®»¯«·®»³»²¬­ò Ó·¨·²¹ ¼·ºº»®»²¬ ´«¾®·½¿²¬­ ½¿² ·²¬»®º»®» ©·¬¸ ¬¸» °®±°»® º«²½¬·±²·²¹ ±º ¬¸»­» ¿¼¼·¬·ª»­ ¿²¼ ´«¾®·½¿²°®±°»®¬·»­ ©¸·½¸ ©·´´ ¼±©²¹®¿¼» ¬¸»·® ·²¬»²¼»¼ ­°»½·º·»¼ °»®º±®³¿²½»ò

ÓÈèêïð

Ю±¼«½¬ ·¼»²¬·º·½¿¬·±² °´¿¬» øß÷ ·­ ´±½¿¬»¼ «²¼»® ¬¸» ¸¿²¼´» ±² ¬¸» ®»¿® ±º ¬¸» ³¿·² ½¿­»ò

Model CS36LE and CS40LE

John Deere Dealers: DZ« ³¿§ ©¿²¬ ¬± ½®±­­ó®»º»®»²½» ¬¸» º±´´±©·²¹ °«¾´·½¿¬·±²­ ¬± ®»½±³³»²¼ ¬¸» °®±°»® ±·´ º·´¬»® º±® §±«® ½«­¬±³»®­æ ¡

Ó±¼«´» ÜÈô Ú×ÔÌ ·² ÖÜÍóÙïíëå

¡ Í»½¬·±² ëìðô Ô«¾®·½¿²¬­ ú ا¼®¿«´·½­ô ±º ¬¸» Ö±¸² Ü»»®» Ó»®½¸¿²¼·­» Í¿´»­ Ù«·¼»å ¡

Ô¿©² ú Ù®±«²¼­ Ý¿®» Ì«²»óË° Ù«·¼» Ð×êéîò

A ÓÈíéçëì

Ю±¼«½¬ ·¼»²¬·º·½¿¬·±² °´¿¬» øß÷ ·­ ´±½¿¬»¼ «²¼»® ¬¸» ¸¿²¼´» ±² ¬¸» ®»¿® ±º ¬¸» ³¿·² ½¿­»ò

Í°»½·º·½¿¬·±²­ ¿²¼ ײº±®³¿¬·±² ×¼»²¬·º·½¿¬·±² Ò«³¾»®­ ó ïï

SPECIFICATIONS AND INFORMATION IDENTIFICATION NUMBERS Model CS46 and CS52

Model CS71 and CS81

A

ÓÈïêíðí

Ю±¼«½¬ ·¼»²¬·º·½¿¬·±² °´¿¬» øß÷ ·­ ´±½¿¬»¼ «²¼»® ¬¸» ¸¿²¼´» ±² ¬¸» ®»¿® ±º ¬¸» ³¿·² ½¿­»ò

A

ÓÈèêïî

Model CS56 and CS62

Ю±¼«½¬ ·¼»²¬·º·½¿¬·±² °´¿¬» øß÷ ·­ ´±½¿¬»¼ «²¼»® ¬¸» ¸¿²¼´» ±² ¬¸» ®»¿® ·º ¬¸» ³¿·² ½¿­»ò

A

ÓÈèêïï

Ю±¼«½¬ ·¼»²¬·º·½¿¬·±² °´¿¬» øß÷ ·­ ´±½¿¬»¼ «²¼»® ¬¸» ¸¿²¼´» ±² ¬¸» ®»¿® ±º ¬¸» ³¿·² ½¿­»ò

Í°»½·º·½¿¬·±²­ ¿²¼ ײº±®³¿¬·±² ×¼»²¬·º·½¿¬·±² Ò«³¾»®­ ó ïî

ENGINE - GAS TABLE OF CONTENTS Table of Contents Û²¹·²» ó Ù¿­

Specifications .................................................15 ÝÍíê òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòïë ÝÍíêÔÛ òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòïë ÝÍìð òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòïê ÝÍìðÔÛ òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòïê ÝÍìê òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòïé ÝÍëî òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòïé ÝÍëê òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòïè ÝÍêî òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòïè ÝÍéï òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòïç ÝÍèï òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòïç Ì·¹¸¬»²·²¹ ̱®¯«»­ ó ÝÍíêô ÝÍìð òòòòòòòòòòòòòòòîð Ì·¹¸¬»²·²¹ ̱®¯«»­ ó ÝÍíêÔÛô ÝÍìðÔÛ òòòòòòîð Ì·¹¸¬»²·²¹ ̱®¯«»­ ó ÝÍìêô ÝÍëî òòòòòòòòòòòòòòòîï Ì·¹¸¬»²·²¹ ̱®¯«»­ ó ÝÍëêô ÝÍêîô ÝÍéïô ÝÍèï òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòîî Í°»½·¿´ ̱±´­òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòîí Ѭ¸»® Ó¿¬»®·¿´­òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòîí Theory of Operation .......................................24 Ô±© Û³·­­·±² Û²¹·²» Ü·ºº»®»²½» ¿²¼ Ñ°»®¿¬·±²òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòîì Component Location......................................25 ݱ³°±²»²¬ Ô±½¿¬·±² ó ÝÍíêô ÝÍìð òòòòòòòòòòòòòîë ݱ³°±²»²¬ Ô±½¿¬·±² ó ÝÍíêÔÛô ÝÍìðÔÛ òòòòîë ݱ³°±²»²¬ Ô±½¿¬·±² ó ÝÍìêô ÝÍëî òòòòòòòòòòòòòîê ݱ³°±²»²¬ Ô±½¿¬·±² ó ÝÍëêô ÝÍêî òòòòòòòòòòòòòîê ݱ³°±²»²¬ Ô±½¿¬·±² ó ÝÍéïô ÝÍèï òòòòòòòòòòòòòîé Diagnostics .....................................................28 Ì®±«¾´»­¸±±¬·²¹òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòîè Tests and Adjustments ..................................30 Ý¿®¾«®»¬±® Ю»­­«®» Ì»­¬ ó ß´´ Ó±¼»´­ òòòòòòòòòíð ×¹²·¬·±² Ñ«¬°«¬ Ì»­¬ ó ß´´ Ó±¼»´­ òòòòòòòòòòòòòòòòòòíï Í°¿®µ д«¹ Ù¿° ó ß´´ Ó±¼»´­ òòòòòòòòòòòòòòòòòòòòòòòòíï ×¹²·¬·±² Í©·¬½¸ Ì»­¬ ó ÝÍíêô ÝÍíêÔÛô ÝÍìðô ÝÍìðÔÛô ÝÍìêô ÝÍëî òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòíî ×¹²·¬·±² Í©·¬½¸ Ì»­¬ ó ÝÍëêô ÝÍêîô ÝÍéïô ÝÍèï òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòíî ×¹²·¬·±² Ó±¼«´» Ì»­¬ ó ß´´ Ó±¼»´­ òòòòòòòòòòòòòòòòòíí ᬱ® ײ­°»½¬·±² ó ß´´ Ó±¼»´­ òòòòòòòòòòòòòòòòòòòòòòòíì Ý¿®¾«®»¬±® ß¼¶«­¬³»²¬ ó ÝÍíêô ÝÍìðô ÝÍìêô ÝÍëîô ÝÍëêô ÝÍêîô ÝÍéïô ÝÍèï òòòòòòòòòòòòòòòòíë Ý¿®¾«®»¬±® ß¼¶«­¬³»²¬ ó ÝÍíêÔÛô ÝÍìðÔÛ òíê ݱ³°®»­­·±² Ì»­¬ ó ß´´ Ó±¼»´­ òòòòòòòòòòòòòòòòòòòòíè Ú«»´ Ú·´¬»® ײ­°»½¬·±² ó ß´´ Ó±¼»´­ òòòòòòòòòòòòòòòòíè

Ú«»´ Ы³° ¿²¼ Ú«»´ Ô·²» ײ¬»¹®·¬§ Ì»­¬ ó ß´´ Ó±¼»´­ òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò íç Ы´­» Ì»­¬ ó ß´´ Ó±¼»´­ òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò ìð Ю·³»® Þ«´¾ Ì»­¬ ó ÝÍìêô ÝÍëîô ÝÍëêô ÝÍêîòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò ìð Ñ·´ Ì¿²µ Ê»²¬ Ì»­¬ ó ß´´ Ó±¼»´­ òòòòòòòòòòòòòòòòòòò ìï Ý®¿²µ½¿­»ñݧ´·²¼»® Ю»­­«®» ¿²¼ Ê¿½««³ Ì»­¬ ó ß´´ Ó±¼»´­ òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò ìï ß·® Í»¿´ Ì»­¬ ó ÝÍíêÔÛô ÝÍìðÔÛ òòòòòòòòòòòòòòòò ìî λ»¼ Ê¿´ª» Í»¿´ Ì»­¬ ¿²¼ Ï«·½µ Ý´»¿² òòòòòò ìí Repair.............................................................. 44 ß·® Ú·´¬»® λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍíêô ÝÍìðòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò ìì ß·® Ú·´¬»® λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍíêÔÛô ÝÍìðÔÛòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò ìì ß·® Ú·´¬»® λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍìêô ÝÍëîòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò ìë ß·® Ú·´¬»® λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍëêô ÝÍêîô ÝÍéïô ÝÍèïòòòòòòòòòòòòòòòòòòòòòòòòòòò ìê ݧ´·²¼»® ݱª»®ñͬ¿®¬»® λ³±ª» ¿²¼ ײ­¬¿´´ ó ÝÍíêô ÝÍíêÔÛô ÝÍìðô ÝÍìðÔÛ òòòòò ìê ݧ´·²¼»® ݱª»® λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍìêô ÝÍëîòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò ìé ݧ´·²¼»® ݱª»® λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍëêô ÝÍêîô ÝÍéïô ÝÍèïòòòòòòòòòòòòòòòòòòòòòòòòòòò ìé Ñ·´ Ì¿²µ Ê»²¬ λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ß´´ Ó±¼»´­ òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò ìè Ú«»´ Ì¿²µ Ê»²¬ λ³±ª» ¿²¼ ײ­¬¿´´ ó ÝÍíêô ÝÍíêÔÛô ÝÍìðô ÝÍìðÔÛôÝÍìêô ÝÍëîòòòòòòòò ìè Ú«»´ Ì¿²µ Ê»²¬ λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍëêô ÝÍêîô ÝÍéïô ÝÍèïòòòòòòòòòòòòòòòòòòòòòòòòòòò ëð Ý¿®¾«®»¬±® λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍíêô ÝÍíêÔÛô ÝÍìðô ÝÍìðÔÛ òòòòòòòòòòòòòòòòòò ëï Ý¿®¾«®»¬±® λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍìêô ÝÍëîòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò ëï Ý¿®¾«®»¬±® λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍëêô ÝÍêîòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò ëî Ý¿®¾«®»¬±® λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍéïô ÝÍèïòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò ëî Ю·³»® Þ«´¾ λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍìêô ÝÍëîòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò ëí Ю·³»® Þ«´¾ λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍëêô ÝÍêîòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòò ëí Ó«ºº´»® λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍíêô ÝÍíêÔÛô ÝÍìðô ÝÍìðÔÛô ÝÍìêô ÝÍëî òòòòòòò ëì Ó«ºº´»® λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍëêô ÝÍêîô ÝÍéïô ÝÍèïòòòòòòòòòòòòòòòòòòòòòòòòòòò ëë ̸®±¬¬´» Ì®·¹¹»® ¿²¼ ̸®±¬¬´» Ô±½µ±«¬ λ³±ª¿´

Û²¹·²» ó Ù¿­ Ì¿¾´» ±º ݱ²¬»²¬­ ó ïí

ENGINE - GAS TABLE OF CONTENTS ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍíêô ÝÍíêÔÛô ÝÍìðô ÝÍìðÔÛô ÝÍìêô ÝÍëî òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòëê ̸®±¬¬´» Ì®·¹¹»® ¿²¼ ̸®±¬¬´» Ô±½µ±«¬ λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍëêô ÝÍêîô ÝÍéïô ÝÍèï ëé Ø¿²¼´» ß­­»³¾´§ λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍíêô ÝÍíêÔÛô ÝÍìðô ÝÍìðÔÛòòòòòòòòòòòòòòòòòòòëé Ø¿²¼´» ß­­»³¾´§ λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍìêô ÝÍëî òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòëè Ø¿²¼´» ß­­»³¾´§ λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍëêô ÝÍêîô ÝÍéïô ÝÍèï òòòòòòòòòòòòòòòòòòòòòòòòòòòëç ×­±´¿¬±® λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍëêô ÝÍêîô ÝÍéïô ÝÍèï òòòòòòòòòòòòòòòòòòòòòòòòòòòëç ͬ¿®¬»® λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍíêô ÝÍíêÔÛô ÝÍìðô ÝÍìðÔÛòòòòòòòòòòòòòòòòòòòêð ͬ¿®¬»® λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍìêô ÝÍëî òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòêï ͬ¿®¬»® λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍëêô ÝÍêîô ÝÍéïô ÝÍèï òòòòòòòòòòòòòòòòòòòòòòòòòòòêí ᬱ® ¿²¼ ×¹²·¬·±² Ó±¼«´» λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍíêô ÝÍíêÔÛô ÝÍìðô ÝÍìðÔÛô ÝÍìêô ÝÍëî òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòêë ᬱ® ¿²¼ ×¹²·¬·±² Ó±¼«´» λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍëêô ÝÍêîô ÝÍéïô ÝÍèï òòòòòòòêê ݸ¿·² Þ®¿µ» λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍíêô ÝÍíêÔÛô ÝÍìðô ÝÍìðÔÛòòòòòòòòòòòòòòòòòòòêé ݸ¿·² Þ®¿µ» λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍìêô ÝÍëî òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòêç ݸ¿·² Þ®¿µ» λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍëêô ÝÍêîô ÝÍéïô ÝÍèï òòòòòòòòòòòòòòòòòòòòòòòòòòòéð Ý´«¬½¸ λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ß´´ Ó±¼»´­òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòéî Ñ·´ Ы³° λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍíêô ÝÍíêÔÛô ÝÍìðô ÝÍìðÔÛô ÝÍìêô ÝÍëîòòòòòòòòéí Ñ·´ Ы³° λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍëêô ÝÍêîô ÝÍéïô ÝÍèï òòòòòòòòòòòòòòòòòòòòòòòòòòòéì Û²¹·²» Ü·­¿­­»³¾´§ ¿²¼ ײ­°»½¬·±² ó ÝÍíêô ÝÍíêÔÛô ÝÍìðô ÝÍìðÔÛòòòòòòòòòòòòòòòòòòòéë Û²¹·²» ß­­»³¾´§ ó ÝÍíêô ÝÍíêÔÛô ÝÍìðô ÝÍìðÔÛ òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòéé λ»¼ Ê¿´ª» λ³±ª¿´ ¿²¼ ײ­¬¿´´¿¬·±² ó ÝÍíêÔÛô ÝÍìðÔÛòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòéè Û²¹·²» Ü·­¿­­»³¾´§ ¿²¼ ײ­°»½¬·±² ó ÝÍìêô ÝÍëî òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòèð Û²¹·²» ß­­»³¾´§ ó ÝÍìêô ÝÍëî òòòòòòòòòòòòòòòòòòèî Û²¹·²» Ü·­¿­­»³¾´§ ¿²¼ ײ­°»½¬·±² ó ÝÍëêô ÝÍêîô ÝÍéïô ÝÍèï òòòòòòòòòòòòòòòòòòòòòòòòòòòèí Û²¹·²» ß­­»³¾´§ ó ÝÍëêô ÝÍêîô ÝÍéïô ÝÍèï òòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòòèë

Conversion ..................................................... 87 ݸ¿·² з¬½¸ ݱ²ª»®­·±² ó ÝÍëêô ÝÍêî òòòòòòòò èé

Û²¹·²» ó Ù¿­ Ì¿¾´» ±º ݱ²¬»²¬­ ó ïì

ENGINE - GAS SPECIFICATIONS Specifications CS36 Specifications: Displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35.2 mm (2.15 cu in.)

Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 mm (1.50 in.)

Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 mm (1.22 in.)

Starter Rope Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 x 900 mm (0.118 x 35.4 in.)

Idle rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2800 Maximum rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12,500 - 13,000 Break-In rpm (SEE NOTE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12,200 - 12,500 Low Speed Screw Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1/4 ± 1/8 Turn High Speed Screw Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1/4 ± 1/8 Turn Throttle Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trigger Type with Safety Interlock Fuel Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 mL (13.5 fl oz) Fuel:Oil Mix Ratio - with John Deere Premium Synthetic 2- Cycle Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50:1 Fuel:Oil Mix Ratio - with any other 2- Cycle Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32:1 Bar Lubricant Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 mL (7.4 fl oz) Vibration Isolation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Five Point - Three spring Mounts, Two Rubber Mounts Guide Bar Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 in., 14 in., 16 in., 18 in.

Saw Chain Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.375 Pitch, 0.050 Gauge, Low Profile Note: After five tanks of fuel for break in period, adjust to recommended rpm. After thirty tanks of fuel, adjust for maximum power. Factory carburetor settings are generally sufficient for the 5 to 6 tank break-in period. All engines should be broken-in rich due to tight engine tolerances. All engines will vary on break-in rpm and maximum rpm s. The listings provided are a general guideline. Verify that high speed screw settings are rich of optimum during the 5 to 6 tank break-in period.

CS36LE Specifications: Displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35.2 mm (2.15 cu in.)

Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 mm (1.50 in.)

Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 mm (1.22 in.)

Starter Rope Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 x 900 mm (0.118 x 35.4 in.)

Idle rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2800 Maximum rpm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12,500 - 13,000 Low Speed Screw Adjust Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4Turn High Speed Screw Adjust Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1/4 Turn Throttle Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trigger Type with Safety Interlock Fuel Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 350 mL (11.8 fl oz) Fuel:Oil Mix Ratio - with John Deere Premium Synthetic 2- Cycle Engine Oil only. . . . . . . . . . . . . . . . . . . . . . . . . 50:1 Bar Lubricant Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220 mL (7.4 fl oz) Vibration Isolation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Five Point - Three spring Mounts, Two Rubber Mounts Guide Bar Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 in., 14 in., 16 in., 18 in.

Saw Chain Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.375 Pitch, 0.050 Gauge, Low Profile Note: There is no carburetor adjustment needed after the break-in period.

Û²¹·²» ó Ù¿­ Í°»½·º·½¿¬·±²­ ó ïë