John Deere W330 Combine Harvesters Service Technical Manual（TM5SR14289）

Combine W 0 Technical Manual

TECHNICAL MANUAL Combine W TM5SR

Issue

For complete service information also see: Diesel Engine Technical Manual in English Language CTM5AP9873 Diesel Engine Technical Manual in German Language CTM5AP9906 Diesel Engine Technical Manual in Polish Language CTM5AP9916

John Deere GmbH & Co. KG PRINTED IN GERMANY

0 (ENGLISH)

Introduction Foreword This manual is written for an experienced technician.

Essential tools required in performing certain service work are identified in this manual and are recommended for use.

Technical Manuals are concise guides for specific machines. They are on-the-job guides containing only the vital information needed for diagnosis, analysis, testing and repair.

Live with safety: Read the safety messages in the introduction of this manual and the cautions presented throughout the text of the manual.

Fundamental service information is available from other sources covering basic theory of operation, fundamentals of troubleshooting, general maintenance, and basic type of failures and their causes.

This is the safety-alert symbol. When you see this symbol on the machine or in this manual, be alert to the potential for personal injury.

Information about periodic maintenance work you will find in the Operator’s Manual (OM).

Thanks very much for your reading, Want to get more information, Please click here, Then get the complete manual

NOTE: If there is no response to click on the link above, please download the PDF document first, and then click on it.

Have any questions please write to me: admin@servicemanualperfect.com

SAFETY PRECAUTIONS When servicing or repairing the combine, there is always a risk of injury! Before undertaking any repair work, make sure you understand these safety precautions.

All repair and maintenance work must be done with the engine and transmission off, the ignition key off the ignition and the master switch in its off position. All moving parts must be kept steady, immobile and locked, if necessary.

Do not undertake any repair work that you are not familiar with.

Choose a safe place for the repair work.

Keep the repair area neat and tidy.

Do not use defective or unsuitable tools.

Remove all rings, bracelets and watches before staring work.

Wear proper protection when working; eye protection when working with pressurized air, grinding or hammering.

Use a trolley jack to lift or move heavy (over 20 kg) parts. Ensure the lifting hooks, chains, etc. are in faultless condition.

Do not rely on a trolley jack or jack only. Use heavy trestles to support the combine. Always support the cutting table and the reel.

Beware of slipping or falling down when walking on the combine.

Do not start the combine engine with any other means except the ignition key.

Ensure that loose clothing or long hair do not get tangled in rotating parts.

Be very careful if the engine has to be started before the service is completed. Take great care when starting the engine after the service has been completed.

If the engine is started indoors, make sure there is good ventilation.

Do not touch the exhaust manifold, the compressor or other hot parts. Open the cap of an over-pressurized radiator carefully when the engine is hot. Hot radiator liquid and lubrication oil will scald your skin.

Disconnect the battery minus (-) cable when servicing or repairing the electrical system.

Do not use unsuitable tools to remove or replace the battery.

Be very careful when working with battery acids.

Do not add coolant with the engine running.

Do not add air in the tyres without a pressure gauge; there is a risk of explosion.

Do not add fuel with the engine running.

Do not increase the hydraulic working pressure without a pressure gauge; there is a risk of damage to the hoses.

When servicing the hydraulics, be aware of the high pressure in the system. Make sure there is no pressure in the system or in the pressure reservoir before disconnecting the connectors.

When doing repair work, do not spill any oils or liquids in the soil.

Do not use fuses stronger than the original ones. Too strong fuses may cause damage.

Tow the combine only from designated points.

Be very careful if using a high-pressure water jet to clean the combine. Do not direct the jet at electrical or fuel systems, bearings or the condenser.

4