THE COMPLETE GUIDE FOR ZERO PAINTS Zero Paints, also known as Basecoat Paint, are manufactured in metallic, solid and pearl/mica colours so that they can match the colour of almost car and motorcycle. The word base in its name depicts the requirement of a clear coat that is used for giving a gloss finish.
How to apply zero paints?
The first thing you have to do while applying zero paints is to remove all mould lines from the body or parts of your vehicle. This can be done with the use of abrasive paper or standing sticks. Most of the manufacturers opt to use a release agent, allowing castings to release better from the mould. The release agent helps the prevention of adhering of paint to the parts.
Clean the body of your vehicle with Key and Clean, which contains a dualaction cleaner, essential for removing silicones, waxes, and other contaminates.
Next, you have to apply a primer, which is one of the essential steps. This is a preparatory coating that is used before painting with Zero Paints, to ensure better adhesion to the surface. It also increases the durability of paint, providing additional protection for the plastic/metal part that is being painted. Also, be very careful while applying it as the finishing will be smooth enough only if the primer coat is also smooth.
Before applying zero paints, give a shake to your chosen colour or stir to ensure that it is thoroughly mixed. Keep the compressor at 20-40 PSI or adjust it according to your equipment.
Most colours can be easily applied over a light-coloured primer. However, there are some who need a particular Ground coat colour. This colour has to be applied before getting the finished colour.
The number of coatings of the finished colour depends on its shade. Lighter colours need more coats compared to darker shades. Make sure that you DO NOT apply Wet Coats as it will not give a nice and even colour coverage. Also, use the last coat in a criss-cross manner, which will allow an even consistency of the pearl or metallic particles in the paint. In case you get blemishes in the final paint, use your abrasives and correct it. Apply more colour coats on it and leave it overnight.