Sixty82 Alpha Modular Truss System / JSA Europe

WORLDWIDE PATENT

Opening new doors ALPHA82 is a brand-new patented truss system that you can configure to the job ahead. The unique ALPHA connectors can be connected to expertly designed ALPHA ladder trusses (sizes L52 and XL101) to form a 3D truss with similar strength compared to standard trusses with the same dimensions.

The ALPHA connector contains M12 size slots on all 4 sides enabling you to connect accessories such as lifting eyes, clamps, brackets, curtain tracks, trolley beams, braces and/or machinery.

Available in two sizes Connectable to existing L52S and the XL101R truss Available in 4 standard lengths: 50 cm, 100 cm, 200 cm and 300 cm.

Endless possibilities Once delivered, you can assemble, configure, and let your creativity run free, using either our ‘standard’ ALPHA connector or your own configuration to create the shape you need. You can easily adjust your 52 truss from 30 cm width up to 80 cm width with just a couple of bespoke ALPHA connectors and no further investment in truss parts.

This results in a much more flexible inventory than your competitors, a lower storage cost due to less warehouse space and, ultimately, a better ROI.

L52 Single

XL101 Single

I Beam

Stackable Truss

L52 Vertical Stacked

XL101 Vertical Stacked

L52 Double Truss

Cable Trunck

L52 Rectangle

Wheel Bracket

60 mm Tube

Stacked L52 Truss

Loading Example: ALPHA L52S truss with ALPHA connectors in the top only, has the same maximum loading capacity as an L52S single straight span or multiple supported span if: 1. The truss modules of the truss span are fully equipped with diagonals between the top chords.

2. The truss span has one diagonal per truss module and is horizontally supported at the top chords every 9 meter.

3. The truss span is horizontally

Loading capacity of the Alpha Modular Truss System

supported at the top every 6 meter.

4. The truss span has equally divided hanging points at a distance of

Trusses designed from the game-

Depending on the ALPHA components

maximum 4.5 meter (multiple

changing Alpha Modular Truss System

chosen in the design of an ALPHA

supported truss). Example: trusses

can have different sizes and shapes. To

L52S truss, its loading capacities can

get an idea of the loading capacity of

exceed those of a standard L52S. Using

ALPHA trusses we highlight the ALPHA

a minimum of components for the

has one diagonal between the top

L52S truss. The ALPHA L52S truss has

ALPHA L52S truss may result in lower

chords in every truss module.

the same outer dimensions as the well-

loading capacity and stability due to a

known welded L52S truss.

reduced lateral stiffness depending on

6. The truss span is 6 meter long.

the length of a truss span, the amount of

A reduction of the required loading can

supports or the type of load. For custom

result in longer allowable spans, less

configurations an ALPHA truss needs an

components and no need for horizontal

individual structural analysis.

stabilisation.

Load Capacity Bolt Channel Type of Bolt Head of Nut

Max Load

M12 Hexagon Bolt Head

600 kg

M12 Hexagon Nut Din 934

600 kg

Values given are for vertical loads only.

Allowable loadings are based on Eurocode EN 1999.

Higher loads are possible. E.g. when square nuts or bespoke inserts are used.

The maximum load shall also be checked in relation with the length of the span of the ALPHA joint.

used for trolley track systems.

5. The truss span is 9 meter long and

Sixty82 BV Ampèrelaan 9 | 9207 AM Drachten | The Netherlands +31 88 13 422 00 info@sixty82.nl www.sixty82.nl

The New Original Official distributor of SIXTY82 in Ukraine and Latvia JSA STAGE COMPANY sixty82@jsa-stage.com Kyiv / Ukraine: +380443614848 Jurmala / Latvia: +37122774848

MADE IN THE NETHERLANDS

WORLDWIDE PATENT