Page 1

Antennas - Catalogue 2011

ANYWHERE THE SOLUTION


Antennas - Catalogue 11

Via Senatore Simonetta,26 20867 Caponago (MB) - Italy tel.: +39 02.95.96.11 fax +39 02.95.96.13.11 e-mail: info@sira.mi.it www.sira.mi.it


history SIRA SIRA is a privately owned company, founded in 1977 by a group of technicians active in the telecommunication field and specialized in RF technology. Sira has 11,000 sq.meters of manufacturing and support facility based in Caponago (MI) Italy. SIRA is a customer oriented company, which has adopted the philosophy of working together with its customers to meet the critical technical requirements for their systems with an attitude of enthusiasm and concern in order to provide the best results in the final products. This approach has given Sira a position of leadership in its field. Sira products are designed and manufactured in accordance with the particular international standards in force in the area. As a major position of its cross revenues, Sira has been investing in research and development, quality and reliability control and products safety in the RF field. This policy of investments has provided Sira with an extremely high level of experience in its field: there are Sira installations in more than 80 countries in the world.

1


quality

SIRA’s aim is to give to all its customers reliable products and services with the highest quality standards, this ambitious goal is achieved mainly by means of an integrated management system (Quality-Safety-environment) and is certified according to the norms UNI EN ISO 9001 (2000) and UNI EN 14001 (1996). VHF ANTENNAS UHF ANTENNAS SPECIAL ANTENNAS

The enhancement of company efficiency through the continuous improvement of the operative quality of the internal functions (effectiveness), the reduction of defects on sold products and the notable attention to the quality culture at all company levels have become SIRA’s fundamental cares. Moreover SIRA is committed in a thorough policy of environmental protection: a training and information process on all personnel is continuously carried out in order to grant a responsible management of all the activities in a special respect of the environment. For instance, the development and the implementation of new technologies, products and production processes is carried out with a thorough control for a rational use of energetic sources and of raw materials, minimizing the production of waste and the use of non-renewable resources, everything with the aim of keeping environmental impact on air and water as lowest as it is possible. For all SIRA’s activities it is fundamental to oppose the conditions of life and work which are against the health of the workers, as well as promoting freedom principles and self-respect for any human being. An extract from SIRA’s ethic code states that “Sira refuses any discrimination based on sex, race, languages, personal and social conditions, religion and political choices” and to this aim Sira promotes a working environment that, inspired to the principles of respect, fairness and collaboration, is meant to support the involvement of all Employees and Contributors giving the common sense of responsibility in reaching all the Company goals.

COAXIAL COMPONENTS 2


index

FM Antennas

5

VHF Antennas

57

UHF Antennas

95

Special Antennas

117

Switching Units and Manual Switches

131

Coaxial Components

143

3


FM-01

7

FM-03H

9

FM-03V

13

FM-04

17

FM-05H

19

FM-05V

23

FM-07

27

FM-11

29

FM-12

31

FM-14

33

FM-17

35

FM-21

37

FM-22

39

FMC-01

40

FMC-02

42

FMC-03

46

FMC-05

50

FMC-06

54

5

FM ANTENNAS

FM Antennas


FM-01

FM ANTENNAS

FM PANEL ANTENNA

FEATURES vertical or horizontal polarization broadband 87.5 ÷ 108 MHz 4.5 dB gain directional pattern stainless steel dipole

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

RADIATION PATTERNS (Mid Band)

FM-01 87.5 ÷ 108 MHz 50 ohm 7/8” EIA 5 kW ≤ 1.3 Vertical or Horizontal 4.5 dB E-Plane ± 35° H-Plane ± 60° All Metal Parts DC Grounded

2000 x 1400 x 1018 mm 43 kg 0.52 m2 0.81 kN 270 km/h Reflector (hot dip galvanized steel) Dipole (stainless steel) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) Directly on supporting mast or with pipe clamps (not supplied) Specifications are subject to change without prior notice

7


FM-01

FM PANEL ANTENNA

FM ANTENNAS

FEATURES radiating systems with FM-01 directional patterns high power systems broadband 87.5 รท108 MHz ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING

87.5 รท 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ‰ค 1.3 Throughout the frequency range

VSWR

(Lower figures for individual channels on request)

UHF ANTENNAS

POLARIZATION GAIN VERTICAL PATTERN

Vertical or Horizontal Refer to table Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves). Each half can accept full power.

OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE TECHNICAL DATA NUMBER PANELS OF PER BAYS BAY 2 1 4 1 6 1 8 1 12 1 16 1

GAIN dB (1) 7.5 10.5 12.2 13.5 15.2 16.5

Subject to number of bays Refer to table Refer to table Yes Grey (standard) Available upon request

GAIN TIMES (1) 5.6 11.2 16.6 22.3 33.2 44.6

WEIGHT kg (2) 92 178 274 372 548 744

ANTENNA WIND LOAD HEIGHT L kN m (3) 4.6 1.62 9.8 3.24 15 4.86 20.2 6.48 30.6 9.72 41 12.96

(1) referred to half wave dipole. Losses of power distribution network not included. (2) without mounting hardware. (3) v= 150 km/h Specifications are subject to change without prior notice

8


FM-03 (Horizontal polarization)

FM ANTENNAS

FM PANEL ANTENNA

FEATURES horizontal polarization broadband 87.5 ÷ 108 MHz 7.5 dB gain directional pattern suitable as a component in various arrays on square towers stainless steel dipoles suitable also for vertical polarization

RADIATION PATTERNS (Mid Band)

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

FM-03 87.5 ÷ 108 MHz 50 ohm 7/16 F or 7/8” EIA 3 kW (7/16 F), 5 kW (7/8” EIA) ≤ 1.15 Horizontal 7.5 dB E-Plane ± 34° H-Plane ± 30° All Metal Parts DC Grounded

2200 x 2000 x 991 mm 61 kg 0.77 m2 1.1 kN 270 km/h Reflector (hot dip galvanized steel) Dipoles (stainless steel) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) Directly on supporting mast

9


FM-03 (Horizontal polarization) FM PANEL ANTENNA

FM ANTENNAS

FEATURES radiating systems with FM-03 panel high power systems omnidirectional or directional patterns equal or unequal split ratio power distribution network

UHF ANTENNAS ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING VSWR

87.5 รท 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ‰ค 1.2 Throughout the frequency range

FM-03/32 (8x4) GUANGZHOU, P.R.C.

(Lower figures for individual channels on request)

POLARIZATION GAIN HORIZONTAL PATTERN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE

Horizontal Refer to table Any type according to requirement Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves). Each half can accept full power.

Subject to number of bays Refer to table Refer to table Yes Grey (standard) Available upon request Specifications are subject to change without prior notice

10


FM-03 (Horizontal polarization) FM PANEL ANTENNA

0

0

270

270

90

10

6 3 1 dB

6 3 1 dB

180

180

270

90 10 6 3 1 dB 180

GAIN dB (1) 5.2 3.6 2 11.2 8.2 6.6 5.2 14.2 11.2 9.6 8.2 16 13 11.4 10 17.4 14.4 12.6 11.4

GAIN TIMES (1) 3.3 2.3 1.6 13.2 6.6 4.6 3.3 26.3 13.2 9.1 6.6 39.8 20 13.8 10 55 27.5 18.2 13.8

90

10

0

TECHNICAL DATA NUMBER PANELS OF PER BAYS BAY 2 1 3 4 1 2 2 3 4 1 4 2 3 4 1 6 2 3 4 1 8 2 3 4

FM ANTENNAS

HORIZONTAL PATTERNS WITH 2, 3 AND 4 FACES AT 98 MHZ

WEIGHT kg (2) 138 207 283 138 283 433 588 283 588 880 1086 433 880 1250 1670 588 1086 1670 2175

ANTENNA HEIGHT L m 2.2

5.4

11.8

18.2

24.6

WIND LOAD kN (3) 2.10 2.56 2.92 2.20 4.19 5.13 5.84 4.40 8.38 10.26 11.68 6.60 12.58 15.40 17.53 8.80 16.77 20.53 23.37

(1) referred to half wave dipole. Losses of power distribution network not included. (2) without mounting hardware (3) v= 150 km/h Specifications are subject to change without prior notice

11


FM-03 (Horizontal polarization) FM PANEL ANTENNA

FM ANTENNAS

DIMENSIONAL DETAILS

VERTICAL PATTERN Without null fill With null fill and beam tilt

UHF ANTENNAS Specifications are subject to change without prior notice

12


FM-03 (Vertical polarization)

FM ANTENNAS

FM PANEL ANTENNA

FEATURES vertical polarization broadband 87.5 ÷ 108 MHz 7.5 dB gain directional pattern suitable as a component in various arrays on square towers stainless steel dipoles suitable also for horizontal polarization

RADIATION PATTERNS (Mid Band)

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

FM-03 87.5 ÷ 108 MHz 50 ohm 7/16 F or 7/8” EIA 3 kW (7/16 F), 5 kW (7/8” EIA) ≤ 1.15 Vertical 7.5 dB E-Plane ± 34° H-Plane ± 30° All Metal Parts DC Grounded

2000 x 2200 x 991 mm 61 kg 0.77 m2 1.1 kN 270 km/h Reflector (hot dip galvanized steel) Dipoles (stainless steel) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) Directly on supporting mast Specifications are subject to change without prior notice

13


FM-03 (Vertical polarization) FM PANEL ANTENNA

FM ANTENNAS

FEATURES radiating systems with FM-03 panel high power systems omnidirectional or directional patterns equal or unequal split ratio power distribution network

UHF ANTENNAS ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING VSWR

87.5 รท 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ‰ค 1.2 Throughout the frequency range (Lower figures for individual channels on request)

POLARIZATION GAIN HORIZONTAL PATTERN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE

FM-03/8 (8x1) VALCAVA, ITALY

Vertical Refer to table Any type according to requirement Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves). Each half can accept full power.

Subject to number of bays Refer to table Refer to table Yes Grey (standard) Available upon request Specifications are subject to change without prior notice

14


FM-03 (Vertical polarization) FM PANEL ANTENNA

0

0

270 10

10

6 3 1 dB

6 3 1 dB

180

180

270

90 10 6 3 1 dB 180

GAIN dB (1) 5 3.2 2 10.9 8 6.2 5 13.9 11 9.2 8 15.6 12.7 10.9 9.7 17 14 12.2 11

GAIN TIMES (1) 3.2 2.1 1.6 12.3 6.3 4.2 3.2 24.5 12.6 8.3 6.3 36.3 18.6 12.3 9.3 50.1 25.1 16.6 12.6

90

270

90

0

TECHNICAL DATA NUMBER PANELS OF PER BAYS BAY 2 1 3 4 1 2 2 3 4 1 4 2 3 4 1 6 2 3 4 1 8 2 3 4

WEIGHT kg (2) 138 207 283 138 283 433 588 283 588 880 1086 433 880 1250 1670 588 1086 1670 2175

FM ANTENNAS

HORIZONTAL PATTERNS WITH 2, 3 AND 4 FACES AT 98 MHz

ANTENNA HEIGHT L m 2

5.2

11.6

18

24.4

WIND LOAD kN (3) 2.10 2.56 2.92 2.20 4.19 5.13 5.84 4.40 8.38 10.26 11.68 6.60 12.58 15.40 17.53 8.80 16.77 20.53 23.37

(1) referred to half wave dipole. Losses of power distribution network not included. (2) without mounting hardware (3) v= 150 km/h Specifications are subject to change without prior notice

15


FM-03 (Vertical polarization) FM PANEL ANTENNA

FM ANTENNAS

DIMENSIONAL DETAILS

VERTICAL PATTERN Without null fill With null fill and beam tilt

UHF ANTENNAS Specifications are subject to change without prior notice

16


FM-04

FM ANTENNAS

FM DIPOLE ANTENNA

FEATURES vertical polarization broadband 87.5 ÷ 108 MHz 2 dB gain omnidirectional pattern with preferred direction stainless steel

D: 910 mm

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

RADIATION PATTERNS (Mid Band)

FM-04 87.5 ÷ 108 MHz 50 ohm NF or 7/16 F or 7/8” EIA or 7/8” EIA 90° 0,75 kW (NF), 3 kW (7/16 F), 5 kW (7/8” EIA), 5 kW (7/8” EIA 90°) ≤1.25 TYPICAL Vertical 2 dB E-Plane ± 37° H-Plane ± 105° All metal parts DC grounded

1138 x 1442 x 136 mm 10 kg 0.14 m2 0.18 kN 220 km/h External parts (stainless steel, nickel plated brass) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) With special pipe clamps ø 60 ÷ 114 mm

VSWR

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

17

FREQ. (MHz)


FM-04

FM DIPOLE ANTENNA

radiating systems with FM-04 omnidirectional patterns with preferred direction high power systems

7/8" EIA INPUT

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING

OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE

140

87.5

990 1137.5

- UP -

Subject to number of bays Refer to table Refer to table Yes Grey (standard) One clamp for pole, supplied L

UHF ANTENNAS

87.5 ÷ 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements ≤ 1.25 in the operating frequency Vertical Refer to table Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves). Each half can accept full power.

VSWR POLARIZATION GAIN VERTICAL PATTERN

TECHNICAL DATA NUMBER PANELS OF PER BAYS BAY 2 1 4 1 6 1 8 1 12 1

Ø60÷114

2600

FM ANTENNAS

- UP -

FEATURES

GAIN dB (1) 5 8 9.8 11 12.8

GAIN TIMES (1) 3.16 6.31 9.55 12.59 19.05

WEIGHT kg (2) 27 54 81 108 162

ANTENNA HEIGHT L m 4.0 9.2 14.4 19.6 30.0

WIND LOAD kN (3) 0.36 0.72 1.08 1.44 2.16

(1) referred to half wave dipole. Losses of power distribution network not included. (2) without mounting hardware. (3) v= 150 km/h Specifications are subject to change without prior notice

18

60


FM-05H

FM ANTENNAS

FM PANEL ANTENNA

FEATURES horizontal polarization broadband 87.5 ÷ 108 MHz 6.5 dB gain directional pattern suitable as a component in various arrays on triangular towers stainless steel dipoles

RADIATION PATTERNS (Mid Band)

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

FM-05H 87.5 ÷ 108 MHz 50 ohm 7/16 F or 7/8” EIA 3 kW (7/16 F), 5 kW (7/8” EIA) ≤ 1.15 Horizontal 6.5 dB E-Plane ± 38° H-Plane ± 28° All Metal Parts DC Grounded

2500 x 1700 x 1113 mm 62 kg 0.72 m2 1.05 kN 270 km/h Reflector (hot dip galvanized steel) Dipoles (stainless steel) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) Directly on supporting mast Specifications are subject to change without prior notice

19


FM-05H

FM PANEL ANTENNA

FM ANTENNAS

FEATURES radiating systems with FM-05H panel high power systems omnidirectional or directional patterns equal or unequal split ratio power distribution network broadband 87.5 รท 108 MHz

UHF ANTENNAS ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING VSWR

87.5 รท 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ‰ค 1.2 Throughout the frequency range

FM-05H/12 (6x2) VANCOUVER, B.C., CANADA

(Lower figures for individual channels on request)

POLARIZATION GAIN HORIZONTAL PATTERN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE

Horizontal Refer to table Any type according to requirement Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves). Each half can accept full power.

Subject to number of bays Refer to table Refer to table Yes Grey (standard) Available upon request Specifications are subject to change without prior notice

20


FM-05H

HORIZONTAL PATTERNS WITH 2, 3 FACES AT 98 MHz

TECHNICAL DATA GAIN NUMBER PANELS dB OF PER (1) BAYS BAY 1

2

4

6

8

2 3 1 2 3 1 2 3 1 2 3 1 2 3

3.3 1.6 9.5 6.5 4.8 12.7 9.7 8.0 14.5 11.5 9.8 15.8 12.8 11.1

L

3200

- UP -

GAIN TIMES (1)

WEIGHT kg (2)

ANTENNA HEIGHT L m

WIND LOAD kN (3)

2.1 1.4 8.9 4.5 3.0 18.6 9.3 6.3 28.2 14.1 9.6 38.0 19.0 12.9

140 210 140 287 438 287 596 892 438 892 1260 596 1102 1695

2.5

1.96 2.20 2.10 3.93 4.40 4.20 7.85 8.80 6.30 11.78 13.20 8.40 15.71 17.61

5.7

12.1

18.5

22.4

(1) referred to half wave dipole. Losses of power distribution network not included. (2) without mounting hardware (3) v= 150 km/h Specifications are subject to change without prior notice

21

FM ANTENNAS

FM PANEL ANTENNA


FM-05H

FM PANEL ANTENNA

FM ANTENNAS

DIMENSIONAL DETAILS

VERTICAL PATTERN Without null fill With null fill and beam tilt

40

50

UHF ANTENNAS Specifications are subject to change without prior notice

22


FM-05V

FM ANTENNAS

FM PANEL ANTENNA

FEATURES vertical polarization broadband 87.5 ÷ 108 MHz 6 dB gain directional pattern suitable as a component in various arrays on triangular towers stainless steel dipoles

RADIATION PATTERNS (Mid Band)

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

FM-05V 87.5 ÷ 108 MHz 50 ohm 7/16 F or 7/8” EIA 3 kW (7/16 F), 5 kW (7/8” EIA) ≤ 1.15 Vertical 6 dB E-Plane ± 34° H-Plane ± 36° All Metal Parts DC Grounded

2200 x 2000 x 1113 mm 63 kg 0.79 m2 1.14 kN 270 km/h Reflector (hot dip galvanized steel) Dipoles (stainless steel) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) Directly on supporting mast Specifications are subject to change without prior notice

23


FM-05V

FM PANEL ANTENNA

FM ANTENNAS

FEATURES radiating systems with FM-05V panel high power systems omnidirectional or directional patterns equal or unequal split ratio power distribution network broadband 87.5 รท 108 MHz

UHF ANTENNAS ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING VSWR

87.5 รท 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ‰ค 1.2 Throughout the frequency range (Lower figures for individual channels on request)

POLARIZATION GAIN HORIZONTAL PATTERN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE

Vertical Refer to table Any type according to requirement Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves). Each half can accept full power.

Subject to number of bays Refer to table Refer to table Yes Grey (standard) Available upon request Specifications are subject to change without prior notice

24


FM-05V

FM PANEL ANTENNA

FM ANTENNAS

HORIZONTAL PATTERNS WITH 2, 3 FACES AT 98 MHz

TECHNICAL DATA GAIN NUMBER PANELS dB OF PER (1) BAYS BAY 1

2

4

6

8

2 3 1 2 3 1 2 3 1 2 3 1 2 3

2.9 1.6 9 6.1 4.6 12.2 9.2 7.8 13.9 11 9.5 15.3 12.4 10.7

GAIN TIMES (1)

WEIGHT kg (2)

ANTENNA HEIGHT L m

WIND LOAD kN (3)

1.95 1.45 7.95 4.07 2.88 16.6 8.32 6 24.5 12.59 8.91 33.88 17.38 11.75

142 213 142 291 444 291 604 904 444 904 1278 604 1118 1719

2.2

2.32 2.61 2.48 4.65 5.23 4.98 9.30 10.47 7.46 13.96 15.7 9.95 18.61 20.94

5.4

11.8

18.2

24.6

(1) referred to half wave dipole. Losses of power distribution network not included. (2) without mounting hardware (3) v= 150 km/h Specifications are subject to change without prior notice

25

L

3200

- UP -


FM-05V

FM PANEL ANTENNA

FM ANTENNAS

DIMENSIONAL DETAILS

VERTICAL PATTERN Without null fill With null fill and beam tilt

UHF ANTENNAS Specifications are subject to change without prior notice

26


FM-07

FM ANTENNAS

FM YAGI ANTENNA

FEATURES vertical or horizontal polarization broadband 87.5 ÷ 108 MHz 4.5 dB gain directional pattern stainless steel

D: 910 mm

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

RADIATION PATTERNS (Mid Band)

FM-07 87.5 ÷ 108 MHz 50 ohm NF or 7/16 F or 7/8” EIA or 7/8” EIA 90° 0,75 kW (NF), 3 kW (7/16 F), 5 kW (7/8” EIA), 5 kW (7/8” EIA 90°) ≤ 1.3 Vertical or Horizontal 4.5 dB E-Plane ± 32° H-Plane ± 65° All metal parts DC grounded

1643 x 1684 x 136 mm 14 kg 0.22 m2 0.28 kN 220 km/h External parts (stainless steel, nickel plated brass) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) With special pipe clamps ø 60 ÷ 114 mm

VSWR

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

27

FREQ. (MHz)


FM-07

FM YAGI ANTENNA

OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE

1154

7/8" EIA INPUT 140

48

545

TECHNICAL DATA GAIN NUMBER PANELS PER dB OF BAY (1) BAYS

- UP -

Subject to number of bays Refer to table Refer to table Yes Grey (standard) One clamp for pole, supplied

2 4 6 8 12

1 1 1 1 1

7.5 10.5 12.2 13.5 15.2

GAIN TIMES (1)

WEIGHT kg (2)

5.6 11.2 16.6 22.3 33.2

32 64 96 128 192

ANTENNA WIND LOAD HEIGHT L kN m (3) 4.3 9.5 14.7 19.9 30.3

0.56 1.12 1.68 2.24 3.36

(1) referred to half wave dipole. Losses of power distribution network not included. (2) without mounting hardware (3) v= 150 km/h Specifications are subject to change without prior notice

28

770 1643

L

UHF ANTENNAS

VSWR POLARIZATION GAIN VERTICAL PATTERN

87.5 ÷ 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements ≤ 1.25 in the operating frequency Vertical or Horizontal Refer to table Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves). Each half can accept full power.

2600

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING

1397

Ø60÷114

radiating systems with FM-07 directional patterns high power systems broadband 87.5 ÷ 108 MHz

1684

FM ANTENNAS

- UP -

FEATURES

220

60


FM-11

FM ANTENNAS

FM YAGI ANTENNA

FEATURES vertical or horizontal polarization broadband 87.5 ÷ 108 MHz 5.3 dB gain directional pattern stainless steel

D: 910 mm

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

RADIATION PATTERNS (Mid Band)

FM-11 87.5 ÷ 108 MHz 50 ohm NF or 7/16 F or 7/8” EIA or 7/8” EIA 90° 0,75 kW (NF), 3 kW (7/16 F), 5 kW (7/8” EIA), 5 kW (7/8” EIA 90°) ≤ 1.27 Vertical or Horizontal 5.3 dB E-Plane ± 32° H-Plane ± 55° All metal parts DC grounded

1643 x 1640 x 136 mm 14.5 kg 0.24 m2 0.31 kN 220 km/h External parts (stainless steel, nickel plated brass) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) With special pipe clamps ø 60 ÷ 114 mm

VSWR

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

29

FREQ. (MHz)


FM-11

FM YAGI ANTENNA

radiating systems with FM-11yagi-antennas directional patterns high power systems broadband 87.5 ÷ 108 MHz

OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE

1397

1154

7/8" EIA INPUT

140

48

325 220

- UP -

Subject to number of bays Refer to table Refer to table Yes Grey (standard) One clamp for pole, supplied

TECHNICAL DATA NUMBER OF BAYS

PANELS PER BAY

GAIN dB (1)

GAIN TIMES (1)

WEIGHT kg (2)

2 4 6 8 12

1 1 1 1 1

8.3 11.3 13 14.3 16

6.7 13.5 19.9 26.9 39.8

41 83 125 166 249

ANTENNA WIND LOAD HEIGHT L kN m (3) 4.3 9.5 14.7 19.9 30.3

0.63 1.26 1.87 2.5 3.76

(1) referred to half wave dipole. Losses of power distribution network not included. (2) without mounting hardware (3) v= 150 km/h Specifications are subject to change without prior notice

30

615 1643

L

UHF ANTENNAS

VSWR POLARIZATION GAIN VERTICAL PATTERN

87.5 ÷ 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements ≤ 1.25 in the operating frequency Vertical or Horizontal Refer to table Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves). Each half can accept full power.

2600

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING

Ø60÷114

1640

FM ANTENNAS

- UP -

FEATURES

375

60


FM-12

FM ANTENNAS

FM YAGI ANTENNA

FEATURES vertical or horizontal polarization broadband 87.5 ÷ 108 MHz 3.7 dB gain directional pattern stainless steel

D: 910 mm

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

RADIATION PATTERNS (Mid Band)

FM-12 87.5 ÷ 108 MHz 50 ohm NF or 7/16 F or 7/8” EIA or 7/8” EIA 90° 0,75 kW (NF), 3 kW (7/16 F), 5 kW (7/8” EIA), 5 kW (7/8” EIA 90°) ≤1.35 Veretical or Horizontal 3.7 dB E-Plane ± 36° H-Plane ± 80° All metal parts DC grounded

1138 x 1684 x 136 mm 10.5 kg 0.17 m2 0.22 kN 220 km/h External parts (stainless steel, nickel plated brass) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) With special pipe clamps ø 60 ÷ 114 mm

VSWR

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

31

FREQ. (MHz)


FM-12

FM YAGI ANTENNA

FM ANTENNAS

FEATURES radiating systems with FM-12 yagi antennas directional patterns high power systems broadband 87.5 รท 108 MHz ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING

UHF ANTENNAS

VSWR POLARIZATION GAIN VERTICAL PATTERN OTHER FEATURES

87.5 รท 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ‰ค 1.25 Throughout the frequency range Vertical or Horizontal Refer to table Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves). Each half can accept full power.

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE

Subject to number of bays Refer to table Refer to table Yes Grey (standard) One clamp for pole, supplied

TECHNICAL DATA NUMBER OF BAYS

PANELS PER BAY

GAIN dB (1)

GAIN TIMES (1)

WEIGHT kg (2)

2 4 6 8 12

1 1 1 1 1

6.7 9.7 11.4 12.7 14.4

4.7 9.3 13.8 18.6 27.5

24.5 49 73 97 145

ANTENNA WIND LOAD HEIGHT L kN m (3) 4.3 9.5 14.7 19.9 30.3

0.44 0.89 1.34 1.77 2.67

(1) referred to half wave dipole. Losses of power distribution network not included. (2) without mounting hardware. (3) v= 150 km/h Specifications are subject to change without prior notice

32


FM-14

FM ANTENNAS

FM DIPOLE ANTENNA

FEATURES vertical polarization broadband 87.5 ÷ 108 MHz 2.5 dB gain directional pattern stainless steel

D: 735 mm

RADIATION PATTERNS (Mid Band)

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

FM-14 87.5 ÷ 108 MHz 50 ohm 1-5/8” EIA 10 kW ≤ 1.4 Vertical 2.5 dB E-Plane ± 32° H-Plane ± 90° All metal parts DC grounded

VSWR 1,6 1,5 1,4 1,3

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

1,2

1392 x 1065 x 250 mm 19Kg 0.22 m2 0.31 kN 220 km/h External parts (stainless steel) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) With special pipe clamps ø 60 ÷ 114 mm

1,1 1,0 87

90

96

99

102

105

108

FREQ. (MHz)

GAIN (dB) 6 5 4 3 2 1 87

90

Specifications are subject to change without prior notice

33

93

93

96

99

102

105

108

FREQ. (MHz)


FM-14

FM DIPOLE ANTENNA

radiating systems with FM-14 dipole directional patterns high power systems broadband 87.5 ÷ 108 MHz

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING

Ø60÷114

1392

VSWR POLARIZATION GAIN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE

1-5/8" EIA INPUT 140

145

875 1064.5

- UP -

Subject to number of bays Refer to table Refer to table Yes Grey (standard) One clamp for pole, supplied L

UHF ANTENNAS

87.5 ÷ 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements ≤ 1.25 in the operating frequency Vertical Refer to table Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves). Each half can accept full power.

2600

FM ANTENNAS

- UP -

FEATURES

TECHNICAL DATA NUMBER PANELS GAIN OF PER dB BAYS BAY (1) 2 4 6 8 12

1 1 1 1 1

5.5 8.5 10.3 11.5 13.3

GAIN TIMES (1)

WEIGHT kG (2)

ANTENNA HEIGHT L m

WIND LOAD kN (3)

3.5 7.0 10.7 14.1 21.4

45 90 140 190 280

4.0 9.2 14.4 19.6 30.0

0.61 1.22 1.83 2.43 3.65

(1) referred to half wave dipole. Losses of power distribution network not included. (2) without mounting hardware. (3) v= 150 km/h Specifications are subject to change without prior notice

34

44.5


FM-17

FM ANTENNAS

FM YAGI ANTENNA

FEATURES vertical or horizontal polarization broadband 87.5 ÷ 108 MHz 4.5 dB gain directional pattern stainless steel

D: 735 mm

RADIATION PATTERNS (Mid Band)

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

FM-17 87.5 ÷ 108 MHz 50 ohm 1-5/8” EIA 10 kW ≤ 1.4 Vertical or Horizontal 4.5 dB E-Plane ± 32° H-Plane ± 65° All metal parts DC grounded

VSWR 1,6 1,5 1,4

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

1,3

1685 x 1515 x 250 mm 22 kg 0.13 m2 0.28 kN 220 km/h External parts (stainless steel, nickel plated brass) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) With special pipe clamps ø 60 ÷114 mm

1,2 1,1 1,0 87

90

96

99

102

105

108

FREQ. (MHz) GAIN (dB) 6 5 4 3 2 1 0 87

90

Specifications are subject to change without prior notice

35

93

93

96

99

102

105

108

FREQ. (MHz)


FM-17

FM YAGI ANTENNA

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER RATING

OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE

1154

140

50

545

- UP -

Subject to number of bays Refer to table Refer to table Yes Grey (standard) One clamp for pole, supplied

TECHNICAL DATA NUMBER OF BAYS

PANELS PER BAY

GAIN dB (1)

GAIN TIMES (1)

WEIGHT kg (2)

ANTENNA HEIGHT L m

WIND LOAD (3) kN

2 4 6 8 12

1 1 1 1 1

7.5 10.5 12.2 13.5 15.2

5.6 11.2 16.6 22.3 33.2

50 100 150 200 250

4.3 9.5 14.7 19.9 30.3

0.57 1.14 1.71 2.28 3.42

(1) referred to half wave dipole. Losses of power distribution network not included. (2) without mounting hardware, for FM-17 antenna (3) v= 150 km/h Specifications are subject to change without prior notice

36

615 1514.5

2600

VSWR POLARIZATION GAIN VERTICAL PATTERN

Ø60÷114

1-5/8" EIA INPUT

L

UHF ANTENNAS

87.5 ÷ 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements ≤ 1.25 in the operating frequency Vertical or Horizontal Refer to table Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves). Each half can accept full power.

1392

radiating systems with FM-17 yagi-antennas directional patterns high power systems broadband 87.5 ÷ 108 MHz

1684

FM ANTENNAS

- UP -

FEATURES

260

44.5


FM-21 

FM ANTENNAS

FM YAGI ANTENNA

FEATURES vertical or horizontal polarization broadband 87.5 ÷ 108 MHz 5.3 dB gain directional pattern stainless steel

D: 735 mm RADIATION PATTERNS (Mid Band)

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

FM-21 87.5 ÷ 108 MHz 50 ohm 1-5/8” EIA 10 kW ≤ 1.35 Vertical or Horizontal 5.3 dB E-Plane ± 32° H-Plane ± 55° All metal parts DC grounded

VSWR

1685 x 1515 x 250 mm 23.5 kg 0.32 m2 0.43 kN 220 km/h External parts (stainless steel, nickel plated brass) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) With special pipe clamps ø 60 ÷ 114 mm

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

37

FREQ. (MHz)


FM-21

FM YAGI ANTENNA

FM ANTENNAS

FEATURES radiating systems with FM-21 yagi-antennas directional patterns high power systems broadband 87.5 ÷ 108 MHz ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING

UHF ANTENNAS

87.5 ÷ 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements ≤1.25 in the operating frequency Vertical or Horizontal Refer to table Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves). Each half can accept full power.

VSWR POLARIZATION GAIN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE

Subject to number of bays Refer to table Refer to table Yes Grey (standard) One clamp for pole, supplied

TECHNICAL DATA NUMBER OF BAYS

PANELS PER BAY

GAIN dB (1)

GAIN TIMES (1)

WEIGHT kg (2)

2 4 6 8 12

1 1 1 1 1

8.3 11.3 13 14.3 16

6.7 13.5 19.9 26.9 39.8

54 108 162 217  325

ANTENNA WIND LOAD HEIGHT L kN m (3) 4.3 9.5 14.7 19.9 30.3

0.88 1.76 2.64 3.52 5.28

(1) referred to half wave dipole. Losses of power distribution network not included. (2) without mounting hardware. (3) v= 150 km/h Specifications are subject to change without prior notice

38


FM-22 

FM ANTENNAS

FM YAGI ANTENNA

FEATURES vertical polarization broadband 87.5 ÷ 108 MHz 3.7 dB gain directional pattern stainless steel

D: 920 mm RADIATION PATTERNS (Mid Band)

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

FM-22 87.5 ÷ 108 MHz 50 ohm 1-5/8” EIA 90° 10 kW ≤ 1.35 Vertical 3.7 dB E-Plane ± 36° H-Plane ± 80° All metal parts DC grounded

VSWR 1,6 1,5 1,4 1,3

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

1,2 1,1

1685 x 1240 x 270 mm 21 kg 0.26 m2 0.35 kN 220 km/h Dipole (stainless steel) Internal parts (silver plated brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Orange (standard) With special pipe clamps ø 60 ÷ 114 mm

1,0 87

90

96

99

102

105

108

FREQ. (MHz)

GAIN (dB) 6 5 4 3 2 1 0 87

90

Specifications are subject to change without prior notice

39

93

93

96

99

102

105

108

FREQ. (MHz)


FMC-01

FM TOP OR SIDEMOUNT DIPOLE

FM ANTENNAS

FEATURES circular/elliptical polarization broadband 87.5 ÷ 104 MHz 92 ÷ 108 MHz

D: 710 mm

UHF ANTENNAS

RADIATION PATTERNS (Mid Band)

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

FMC-01 87.5 ÷ 104 MHz 92 ÷ 108 MHz 50 ohm 7/8” EIA 1.5 kW ≤ 1.4 Circular/Elliptical -1.5 dB Omnidirectional ± 1.5 dB in free space Omnidirectional ± 2 dB with ø 100 pole All metal parts DC grounded

1439 x 802 x 802 mm 10 Kg 0.102 m2 0.36 kN 220 km/h External parts (stainless steel, nickel plated brass) Internal parts (silver plated brass, polished brass) Radome (fiberglass) Feed point radome Grey (standard) With special pipe clamps ø 60 ÷ 115 mm

VSWR

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

40

FREQ. (MHz)


FMC-01

FM ANTENNAS

FM TOP OR SIDEMOUNT DIPOLE

FEATURES radiating systems with FMC-01 dipole omnidirectional patterns

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING

87.5 รท 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ‰ค 1.25 in the operating frequency Circular / Elliptical Refer to table Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves). Each half can accept full power.

VSWR POLARIZATION GAIN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE

Subject to number of bays Refer to table Refer to table Yes Grey (standard) One clamp for pole, supplied

TECHNICAL DATA NUMBER OF BAYS

PANELS PER BAY

GAIN dB (1)

GAIN TIMES (1)

WEIGHT kG (2)

ANTENNA HIGHT L m

WIND LOAD kN (3)

2 4 6 8 12

1 1 1 1 1

1.5 4.5 6.2 7.5 9.2

1.41 2.82 4.17 5.62 8.32

30 55 80 120 180

3.4 8.6 13.8 19.0 29.4

0.72 1.44 2.16 2.88 4.32

(1) referred to half wave dipole. Losses of power distribution network not included. (2) without mounting hardware, for FMC-01 dipole (3) v= 150 km/h Specifications are subject to change without prior notice

41


FMC-02

FM PANEL ANTENNA

FM ANTENNAS

FEATURES circular polarization broadband 87.5 ÷ 108 MHz 3.5 dB gain directional pattern suitable as a component in various arrays on square towers stainless steel dipoles

UHF ANTENNAS

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

RADIATION PATTERNS (Mid Band)

FMC-02 87.5 ÷ 108 MHz 50 ohm 2 x 7/8” EIA 10 kW (5 kW per dipole) ≤ 1.1 (in circular polarization) Circular 3.5 dB (circular polarization) 6.5 dB (circular polarization) Horizontal Component ± 33° Vertical Component ± 33° All Metal Parts DC Grounded

VSWR

3057 x 2200 x 1134 mm 112 kg 1.3 m2 2.07 kN (wind speed 150 km/h) 220 km/h Reflector (hot dip galvanized steel) Dipoles (stainless steel) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Orange (standard) Directly on supporting mast

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

42

FREQ. (MHz)


FMC-02

FM ANTENNAS

FM PANEL ANTENNA

FEATURES radiating systems with FMC-02 panel on square tower high power systems omnidirectional or directional patterns equal or unequal split ratio power distribution network broadband 87.5 รท 108 MHz

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING VSWR

87.5 รท 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ‰ค 1.15 Throughout the frequency range (Lower figures for individual channels on request)

POLARIZATION GAIN HORIZONTAL PATTERN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE

Circular / Elliptical on request Refer to table Any type according to requirement Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves). Each half can accept full power.

FMC-02/48 (6x8) MONTREAL, QUEBEC, CANADA

Subject to number of bays Refer to table Refer to table Yes Orange (standard) Available upon request Specifications are subject to change without prior notice

43


FMC-02

FM PANEL ANTENNA

FM ANTENNAS

HORIZONTAL PATTERNS WITH 2, 3 AND 4 FACES AT 98 MHz 0

0

270

90

270

10

10

6 3 1 dB

6 3 1 dB

180

180

0

270

90 10

UHF ANTENNAS

6 3 1 dB 180

TECHNICAL DATA NUMBER PANELS GAIN OF PER dB BAYS BAY (1) 1

2

4

6

8

2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

1.6 0.2 -1 7.3 4.6 3.2 2 10.3 7.6 6.2 5 12 9.3 7.9 6.7 13.3 10.6 9.3 8.1

90

GAIN TIMES (1)

WEIGHT kG (2)

1.44 1.04 0.79 5.37 2.88 2.09 1.58 10.71 5.75 4.17 3.16 15.85 8.51 6.17 4.68 21.38 11.48 8.51 6.46

260 380 500 260 500 790 1060 500 1060 1520 2070 790 1520 2310 3080 1060 2070 3080 4200

ANTENNA HIGHT L m 2.2

5

10.6

16.2

21.8

WIND LOAD kN (3) 3.76 5.25 6.03 4.14 7.52 10.50 12.06 8.28 15.04 21.00 24.12 12.42 22.56 31.50 36.18 16.56 30.08 42.00 48.24

(1) referred to half wave dipole. Losses of power distribution network not included. (2) without mounting hardware (3) v= 150 km/h Specifications are subject to change without prior notice

44


FMC-02

DIMENSIONAL DETAILS

VERTICAL PATTERN Without null fill With null fill and beam tilt

- UP -

Specifications are subject to change without prior notice

45

FM ANTENNAS

FM PANEL ANTENNA


FMC-03

FM PANEL ANTENNA

FM ANTENNAS

FEATURES circular polarization broadband 87.5 ÷ 108 MHz 4.5 dB gain directional pattern suitable as a component in various arrays on square towers stainless steel dipoles

UHF ANTENNAS

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

RADIATION PATTERNS (Mid Band)

FMC-03 87.5 ÷ 108 MHz 50 ohm 4 x 7/8” EIA 20 kW (5KW per dipole) ≤ 1.1 (in circular polarization) Circular 4.5 dB (Circular polarization) 7.5 dB (Linear polarization) Horizontal Component: ± 32° Vertical component: ± 32° All Metal Parts DC Grounded

2200 x 2200 x 1018 mm 99 k 1.07 m2 1.4 kN (wind speed at 150 km/h) 270 km/h Reflector (hot dip galvanized steel) Dipoles (stainless steel) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) Directly on supporting mast Specifications are subject to change without prior notice

46


FMC-03

FM ANTENNAS

FM PANEL ANTENNA

FEATURES radiating systems with FMC-03 panel on square towers high power systems omnidirectional or directional patterns equal or unequal split ratio power distribution network broadband 87.5รท108 MHz

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING VSWR

87.5 รท 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ‰ค1.15 Throughout the frequency range

FMC-03/12 (4x3) IMPERIA, ITALY

(Lower figures for individual channels on request)

POLARIZATION GAIN HORIZONTAL PATTERN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE

Circular / Elliptical on request Refer to table Any type according to requirement Null fill,beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves) Each half can accept full power

Subject to number of bays Refer to table Refer to table Yes Grey (standard) Available upon request Specifications are subject to change without prior notice

47


FMC-03

FM PANEL ANTENNA

FM ANTENNAS

HORIZONTAL PATTERNS WITH 2, 3 AND 4 FACES AT 98 MHz

UHF ANTENNAS

TECHNICAL DATA NUMBER OF BAYS 1

2

4

6

8

PANELS PER BAY

GAIN dB (1)

GAIN TIMES (1)

WEIGHT kG (2)

2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

1.9 0.4 -0.7 7.6 4.9 3.4 2.4 10.6 7.9 6.4 5.4 12.4 9.8 8.3 7.1 13.8 11.1 9.6 8.6

1.55 1.1 0.85 5.75 3.09 2.19 1.74 11.5 6.16 4.36 3.47 17.38 9.55 6.76 5.13 23.98 12.88 9.12 7.24

249 388 494 249 494 771 1004 494 1004 1464 1956 771 1464 2245 2951 1004 1956 2951 3857

ANTENNA WIND LOAD HIGHT L kN m (3) 2.2

5.4

11.8

18.2

24.6

3.47 4.32 5.18 2.83 6.94 8.64 10.36 5.66 13.89 17.28 20.70 8.50 20.84 25.92 31.06 11.34 27.79 34.56 41.41

(1) referred to half wave dipole. Losses of power distribution network not included. (2) without mounting hardware (3) v= 150 km/h Specifications are subject to change without prior notice

48


FMC-03

DIMENSIONAL DETAILS

VERTICAL PATTERN Without null fill With null fill and beam tilt

Specifications are subject to change without prior notice

49

FM ANTENNAS

FM PANEL ANTENNA


FMC-05

FM PANEL ANTENNA

FM ANTENNAS

FEATURES circular polarization broadband 87.5 ÷ 108 MHz 2.5 dB gain directional pattern suitable as a component in various arrays on triangular towers stainless steel dipoles

UHF ANTENNAS

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

RADIATION PATTERNS (Mid Band)

FMC-05 87.5 ÷ 108 MHz 50 ohm 2 x 7/8” EIA 10 kW (5KW per dipole) ≤ 1.15 (in circular polarization) Circular 2.5 dB (Circular polarization) 5.5 dB (Linear polarization) Horizontal component: ± 38° Vertical component: ± 42° All Metal Parts DC Grounded 1,6

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

1,5 1,4

2200 x 1800 x 1134 mm 82 kg 0.9 m2 1.28 kN (wind speed at 150 km/h) 220 km/h Reflector (hot dip galvanized steel) Dipoles (stainless steel) Internal parts (silver plated brass, polished brass) Radome (fiberglass) Feed point radome Grey (standard) Directly on supporting mast

1,3 1,2 1,1 1,0 87

90

96

99

102

105

108

6 5 4 3 2 1 0 87

90

Specifications are subject to change without prior notice

50

93

93

96

99

102

105

108


FMC-05

FM ANTENNAS

FM PANEL ANTENNA

FEATURES radiating systems with FMC-05 panel on triangular towers high power systems omnidirectional or directional patterns equal or unequal split ratio power distribution network broadband 87.5 รท108 MHz

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING VSWR

87.5 รท 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ‰ค1.15 Throughout the frequency range (Lower figures for individual channels on request)

POLARIZATION GAIN HORIZONTAL PATTERN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE

Circular / Elliptical on request Refer to table Any type according to requirement Null fill,beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves) Each half can accept full power

FMC-05/18 (6x3) RDP PORTALEGRE, PORTUGAL

Subject to number of bays Refer to table Refer to table Yes Grey (standard) Available upon request Specifications are subject to change without prior notice

51


FMC-05

FM PANEL ANTENNA

FM ANTENNAS

HORIZONTAL PATTERNS WITH 2 AND 3 FACES AT 98 MHz 0

270

90 10 6 3 1 dB 180

2800

0

270

90

UHF ANTENNAS

10 6 3 1 dB

L

180

TECHNICAL DATA NUMBER PANELS GAIN OF PER dB BAYS BAY (1) 1

2

4

6

8

2 3 1 2 3 1 2 3 1 2 3 1 2 3

- 0.4 - 2.2 5.6 2.6 0.8 8.6 5.6 3.8 10.6 7.6 5.8 11.8 8.8 7.0

GAIN TIMES (1)

WEIGHT kG (2)

ANTENNA HIGHT L m

WIND LOAD kN (3)

0.91 0.60 3.63 1.82 1.20 7.24 3.63 2.40 11.48 5.75 3.81 15.14 7.59 5.01

192 278 192 364 586 364 788 1112 586 1112 1698 788 1526 2264

1.8

2.36 2.55 2.58 4.72 5.10 5.16 9.44 10.2 7.74 14.16 15.30 10.32 18.88 20.4

4.6

10.2

15.8

21,4

(1) referred to half wave dipole. Losses of power distribution network not included. (2) without mounting hardware. (3) v= 150 km/h Specifications are subject to change without prior notice

52


FMC-05

DIMENSIONAL DETAILS

VERTICAL PATTERN Without null fill With null fill and beam tilt

- UP -

Specifications are subject to change without prior notice

53

FM ANTENNAS

FM PANEL ANTENNA


FMC-06

FM TOP OR SIDEMOUNT DIPOLE

FM ANTENNAS

FEATURES circular/elliptical polarization broadband 87.5 ÷ 108 MHz

UHF ANTENNAS

RADIATION PATTERNS (Mid Band)

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

FMC-06

FMC-06/P 87.5 ÷ 108 MHz 50 ohm 7/8” EIA 1-5/8” EIA 7.5 kW 12.5 kW ≤ 1.4 Circular/Elliptical -1.5 dB Omnidirectional ± 1.5 dB in free space Omnidirectional ± 2 dB with ø 100 pole All metal parts DC grounded VSWR

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

1,6

1550 x 850 x 850 mm 20.5 kg 21.5 kg 2 0.40 m 0.75 kN 220 km/h External parts (stainless steel, nickel plated brass) Internal parts (polished brass, silver plated brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) With special pipe clamps ø 75 ÷ 150 mm

1,5 1,4 1,3 1,2 1,1 1,0 87

90

Specifications are subject to change without prior notice

54

93

96

99

102

105

108

FREQ. (MHz)


FMC-06

FM ANTENNAS

FM TOP OR SIDEMOUNT DIPOLE

FEATURES radiating systems with FMC-06 dipole omnidirectional patterns

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING

87.5 รท 108 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ‰ค 1.25 in the operating frequency Circular/Elliptical Refer to table Null fill, beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves). Each half can accept full power.

VSWR POLARIZATION GAIN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE

Subject to number of bays Refer to table Refer to table Yes Grey (standard) One clamp for pole, supplied

TECHNICAL DATA NUMBER OF BAYS

PANELS PER BAY

GAIN dB (1)

GAIN TIMES (1)

WEIGHT kG (2)

ANTENNA HIGHT L m

WIND LOAD kN (3)

2 4 6 8 12

1 1 1 1 1

1.5 4.5 6.2 7.5 9.2

1.41 2.82 4.17 5.62 8.32

50 105 160 240 360

3.45 8.65 13.85 19.05 29.45

1.51 3.02 4.53 6.04 9.06

(1) referred to half wave dipole. Losses of power distribution network not included. (2) without mounting hardware, for FMC-06 dipole (3) v= 150 km/h Specifications are subject to change without prior notice

55


1VTV-04 C

59

1VTV-04 F

61

1VTV-05 C

63

1VTV-05 F

65

3VTV-02 H

67

3VTV-02 V

72

3VTV-04

76

3VTV-05

81

3VTV-10

82

3VTV-10/A

83

3VTV-11/A

84

3VTV-11/B

85

3VTV-11

86

3VTV-11/P

87

3VTV-15

88

3VTV-16 A

89

3VTVC-02

90

57

VHF ANTENNAS

VHF Antennas


1VTV-04/.C

VHF PANEL ANTENNA

FEATURES

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE

1VTV-04/2C 47÷54 MHz (channel 2)

1VTV-04/3C 1VTV-04/4C 54÷61 MHz 61÷68 MHz (channel 3) (channel 4) 50 ohm 2 x 7/8” EIA 2 x 2.5 kW ≤1.15 Horizontal 6.5 dB E-Plane ± 40° H-Plane ± 27° All Metal Parts DC Grounded

IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN(referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS (mm)

WEIGHT (kg) WIND LOAD (kN) 150 km/h MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

VHF ANTENNAS

horizontal polarization band I° panel 47 ÷ 68 MHz 6.5 dB gain directional pattern suitable for triangular towers stainless steel dipoles

A B C D

3360 1300 1700 2850 145 2.35

2960 2660 1170 1050 1620 1420 2500 2310 130 120 2.10 1.90 220 km/h Reflector (hot dip galvanized steel) Dipole (stainless steel) Internal parts (silver plated brass, polished brass,deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) Directly on supporting mast Specifications are subject to change without prior notice

59

RADIATION PATTERNS (Mid Channel)


1VTV-04/.C

VHF PANEL ANTENNA

HORIZONTAL PATTERNS WITH 2, 3 AND 4 FACES

VERTICAL PATTERN

- UP -

L

S

VHF ANTENNAS UHF ANTENNAS

Without null fill With null fill and beam tilt

TECHNICAL TECHNICAL DATA DATA NUMBER PANELS OF PER BAYS BAY 1 2 3 1 2 2 3 1 4 2 3 1 6 2 3 1 8 2 3

GAIN dB (1) 3.3 1.6 9.5 6.5 4.8 12.7 9.7 8.0 14.5 11.5 9.8 15.8 12.8 11.1

GAIN TIMES (1) 2.1 1.4 8.9 4.5 3.0 18.6 9.3 6.3 28.2 14.1 9.6 38.0 19.0 12.9

ANTENNA HEIGHT L m (Spacing S in m)

WEIGHT kg (2) ch.2 47÷54 MHz

ch.3 54÷61 MHz

ch.4 61÷68 MHz

300 470 300 650 1010 650 1320 1950 1010 1950 2900 1320 2600 3800

270 425 270 590 920 590 1200 1770 920 1770 2630 1200 2360 3440

250 395 250 550 860 550 1120 1650 860 1650 2450 1120 2200 3200

ch.2 47÷54 MHz

ch.3 54÷61 MHz

ch.4 61÷68 MHz

4.15

3.67

3.36

10.55 (6.4)

9.27 (5.6)

8.36 (5.0)

23.35 (6.4)

20.47 (5.6)

18.36 (5.0)

36.15 (6.4)

31.67 (5.6)

28.36 (5.0)

48.95 (6.4)

42.87 (5.6)

38.36 (5.0)

(1) referred to half wave dipole. Losses of power distribution network not included. (2) without mounting hardware (3) v= 150 km/h Specifications are subject to change without prior notice

60

WIND LOAD kN (3) ch.2 47÷54 MHz

ch.3 54÷61 MHz

ch.4 61÷68 MHz

3.6 5.2 6.8 7.2 10.4 14 14.3 20.7 21 21.4 28.5 30.6 31 41.3

3.3 4.9 6.0 6.4 9.7 13.5 13.8 19.3 18.8 19.2 29 25.2 25.6 38.6

3.1 4.5 5.8 6.1 9 11.8 12.1 17.9 17.8 18.1 26.8 23.8 24.2 35.7


1VTV-04/.F

VHF PANEL ANTENNA

FEATURES

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE

1VTV-04/2F 1VTV-04/3F 1VTV-04/4F 1VTV-04/5F 1VTV-04/6F 54÷60 MHz 60÷66 MHz 66÷72 MHz 76÷82 MHz 82÷88 MHz (channel 2) (channel 3) (channel 4) (channel 5) (channel 6) 50 ohm 2 x 7/8” EIA 2 x 2.5 kW ≤1.15 Horizontal 6.5 dB E-Plane ± 40° H-Plane ± 27° All Metal Parts DC Grounded

IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS (mm)

WEIGHT (kg) WIND LOAD (kN) 150 km/h MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

VHF ANTENNAS

horizontal polarization band I° panel 54 ÷ 88 MHz 6.5 dB gain directional pattern suitable for triangular towers stainless steel dipoles

A B C D

2960 1170 1620 2500 130 2.10

2660 1050 1420 2310 120 1.90

2470 2165 970 850 1360 1245 2170 2000 110 100 1.75 1.60 220 km/h Reflector (hot dip galvanized steel) Dipole (stainless steel) Internal parts (silver plated brass, polished brass,deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) Directly on supporting mast

2000 810 1170 1900 90 1.55

Specifications are subject to change without prior notice

61

RADIATION PATTERNS (Mid Channel)


1VTV-04/.F

VHF PANEL ANTENNA

HORIZONTAL PATTERNS WITH 2, 3 AND 4 FACES

VERTICAL PATTERN

VHF ANTENNAS UHF ANTENNAS

Without null fill With null fill and beam tilt

TECHNICAL TECHNICAL DATA DATA NUMBER PANELS GAIN GAIN OF PER dB TIMES BAYS BAY (1) (1) 2 1 3.3 2.1 3 1.6 1.4 1 9.5 8.9 2 2 6.5 4.5 3 4.8 3.0 1 12.7 18.6 4 2 9.7 9.3 3 8.0 6.3 1 14.5 28.2 2 11.5 14.1 6 3 9.8 9.6 1 15.8 38.0 8 2 12.8 19.0 3 11.1 12.9

WEIGHT kg (2)

ANTENNA HEIGHT L m (Spacing S in m)

ch.2 54÷60 MHz

ch.3 60÷66 MHz

ch.4 66÷72 MHz

ch.5 76÷82 MHz

ch.6 82÷88 MHz

270 425 270 590 920 590 1200 1770 920 1770 2630 1200 2360 3440

250 395 250 550 860 550 1120 1650 860 1650 2450 1120 2200 3200

230 365 230 510 800 510 1040 1530 800 1530 2270 1040 2040 2960

210 335 210 470 740 470 960 1410 740 1410 2090 960 1880 2720

190 305 190 430 680 430 880 1290 680 1290 1910 880 1720 2480

ch.2 54÷54 MHz

ch.3 60÷66 MHz

ch.4 66÷72 MHz

ch.5 76÷82 MHz

ch.6 82÷88 MHz

3.67

3.36

3.14

2.85

2.71

9.27 (5.6)

8.36 (5.0)

7.84 (4.7)

6.95 (4.1)

6.51 (3.8)

20.47 (5.6)

18.36 (5.0)

17.24 (4.7)

15.15 (4.1)

14.11 (3.8)

31.67 (5.6)

28.36 (5.0)

26.64 (4.7)

23.35 (4.1)

21.71 (3.8)

42.87 (5.6)

38.36 (5.0)

36.04 (4.7)

31.55 (4.1)

29.31 (3.8)

(1) referred to half wave dipole. Losses of power distribution network not included. (2) without mounting hardware (3) v= 150 km/h Specifications are subject to change without prior notice

62

WIND LOAD kN (3) ch.2 54÷60 MHz

ch.3 60÷66 MHz

ch.4 66÷72 MHz

ch.5 76÷82 MHz

ch.6 82÷88 MHz

3.3 4.9 6.0 6.4 9.7 13.5 13.8 19.3 18.8 19.2 29 25.2 25.6 38.6

3.1 4.5 5.8 6.1 9 11.8 12.1 17.9 17.8 18.1 26.8 23.8 24.2 35.7

2.8 4.1 5.3 5.6 8.2 10.8 11.1 16.3 16.4 16.7 24.4 21.9 22.2 32.5

2.7 3.9 5.0 5.3 7.7 10.1 10.4 15.3 15.3 15.6 23 20.5 20.8 30.6

2.5 3.7 4.6 4.9 7.3 9.4 9.7 14.6 14.3 14.6 21.9 19.2 19.5 29.2


1VTV-05/.C

VHF PANEL ANTENNA

FEATURES

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE

1VTV-05/2C 47÷54 MHz (channel 2)

1VTV-05/3C 1VTV-05/4C 54÷61 MHz 61÷68 MHz (channel 3) (channel 4) 50 ohm 2 x 7/8” EIA 2 x 2.5 kW ≤1.15 Horizontal 7.5 dB E-Plane ± 35° H-Plane ± 27° All Metal Parts DC Grounded

IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS (mm)

WEIGHT (kg) WIND LOAD (kN) 150 km/h MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

VHF ANTENNAS

horizontal polarization band I° panel 47 ÷ 68 MHz 7.5 dB gain directional pattern suitable for square towers stainless steel dipoles

A B C D

3360 1300 1700 2850 145 2.40

2960 2660 1170 1050 1620 1420 2500 2310 130 120 2.15 1.95 220 km/h Reflector (hot dip galvanized steel) Dipole (stainless steel) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) Directly on supporting mast Specifications are subject to change without prior notice

63

RADIATION PATTERNS (Mid Channel)


1VTV-05/.C

VHF PANEL ANTENNA

HORIZONTAL PATTERNS WITH 2, 3 AND 4 FACES

VERTICAL PATTERN

0

270

90 10 6 3 1 dB 180

VHF ANTENNAS

0

270

90 10 6 3 1 dB 180 0

UHF ANTENNAS

270

Without null fill

90

With null fill and beam tilt

10 6 3 1 dB 180

TECHNICAL TECHNICAL DATA DATA PANELS NUMBER PER OF BAY BAYS 2 1 3 4 1 2 2 3 4 1 4 2 3 4 1 6 2 3 4 1 8 2 3 4

GAIN dB (1) 5.2 3.6 2 11.2 8.2 6.6 5.2 14.2 11.2 9.6 8.2 16 13 11.4 10 17.4 14.4 12.6 11.4

GAIN TIMES (1) 3.3 2.3 1.6 13.2 6.6 4.6 3.3 26.3 13.2 9.1 6.6 39.8 20 13.8 10 55 27.5 18.2 13.8

WEIGHT kg (2)

WIND LOAD kN (3)

ANTENNA HEIGHT L m (Spacing S in m)

ch.2 47÷54 MHz

ch.3 54÷61 MHz

ch.4 61÷68 MHz

300 470 650 300 650 1010 1320 650 1320 1950 2600 1010 1950 2900 3800 1320 2600 3800 5000

270 425 590 270 590 920 1200 590 1200 1770 2360 920 1770 2630 3440 1200 2360 3440 4520

250 395 550 250 550 860 1120 550 1120 1650 2200 860 1650 2450 3200 1120 2200 3200 4200

ch.2 47÷54 MHz

ch.3 54÷61 MHz

4.15

3.67

3.36

10.55 (6.4)

9.27 (5.6)

8.36 (5.0)

23.35 (6.4)

20.47 (5.6)

18.36 (5.0)

36.15 (6.4)

31.67 (5.6)

28.36 (5.0)

48.95 (6.4)

42.87 (5.6)

38.36 (5.0)

(1) referred to half wave dipole. Losses of power distribution network not included. (2) without mounting hardware (3) v= 150 km/h Specifications are subject to change without prior notice

64

ch.4 61÷68 MHz

ch.2 47÷54 MHz

ch.3 54÷61 MHz

ch.4 61÷68 MHz

3.7 5.5 6.8 7.0 7.4 11.1 13.4 14.4 14.8 22.2 26.8 21.8 22.3 33.3 40.3 29.2 29.7 44.4 53.7

3.3 5.0 6.1 6.2 6.6 9.9 12.2 12.8 13.1 19.9 24.3 19.4 19.7 29.3 36.5 26 26.2 39.7 48.6

3.1 4.7 5.6 5.8 6.1 9.3 11.2 12 12.1 18.6 22.3 18 18.1 27.9 33.5 24 24.2 37.2 44.6


1VTV-05/.F

VHF PANEL ANTENNA

FEATURES

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE

1VTV-05/2F 1VTV-05/3F 1VTV-05/4F 1VTV-05/5F 1VTV-05/6F 54÷60 MHz 60÷66 MHz 66÷72 MHz 76÷82 MHz 82÷88 MHz (channel 2) (channel 3) (channel 4) (channel 5) (channel 6) 50 ohm 2 x 7/8” EIA 2 x 2.5 kW ≤1.15 Horizontal 7.5 dB E-Plane ± 35° H-Plane ± 27° All Metal Parts DC Grounded

IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS (mm)

WEIGHT (kg) WIND LOAD (kN) 150 km/h MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

VHF ANTENNAS

horizontal polarization band I° panel 54 ÷ 88 MHz 7.5 dB gain directional pattern suitable for square towers stainless steel dipoles

A B C D

2960 1170 1620 2500 130 2.15

2470 2165 970 850 1360 1245 2170 2000 110 100 1.80 1.65 220 km/h Reflector (hot dip galvanized steel) Dipole (stainless steel) Internal parts (silver plated brass, polished brass,deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) Directly on supporting mast 2660 1050 1420 2310 120 1.95

2000 810 1170 1900 90 1.60

Specifications are subject to change without prior notice

65

RADIATION PATTERNS (Mid Channel)


1VTV-05/.F

VHF PANEL ANTENNA

HORIZONTAL PATTERNS WITH 2, 3 AND 4 FACES

VERTICAL PATTERN

0

270

90 10 6 3 1 dB 180

VHF ANTENNAS

0

270

90 10 6 3 1 dB 180 0

UHF ANTENNAS

270

Without null fill

90

With null fill and beam tilt

10 6 3 1 dB 180

TECHNICAL TECHNICAL DATA DATA NUMBER PANELS GAIN GAIN OF dB TIMES PER BAYS BAY (1) (1) 2 5.2 3.3 1 3 3.6 2.3 4 2 1.6 1 11.2 13.2 2 2 8.2 6.6 3 6.6 4.6 4 5.2 3.3 1 14.2 26.3 4 2 11.2 13.2 3 9.6 9.1 4 8.2 6.6 1 16 39.8 6 2 13 20 3 11.4 13.8 4 10 10 1 17.4 55 8 2 14.4 27.5 3 12.6 18.2 4 11.4 13.8

WEIGHT kg (2)

ANTENNA HEIGHT L m (Spacing S in m)

ch.2 54÷60 MHz

ch.3 60÷66 MHz

ch.4 66÷72 MHz

ch.5 76÷82 MHz

ch.6 82÷88 MHz

270 425 590 270 590 920 1200 590 1200 1770 2360 920 1770 2630 3440 1200 2360 3440 4520

250 395 550 250 550 860 1120 550 1120 1650 2200 860 1650 2450 3200 1120 2200 3200 4200

230 365 510 230 510 800 1040 510 1040 1530 2040 800 1530 2270 2960 1040 2040 2960 3880

210 335 470 210 470 740 960 470 960 1410 1880 740 1410 2090 2720 960 1880 2720 3560

190 305 430 190 430 680 880 430 880 1290 1720 680 1290 1910 2480 880 1720 2480 3240

ch.2 54÷60 MHz

ch.3 60÷66 MHz

ch.4 66÷72 MHz

ch.5 76÷82 MHz

ch.6 82÷88 MHz

3.67

3.36

3.14

2.85

2.71

9.27 (5.6)

8.36 (5.0)

7.84 (4.7)

6.95 (4.1)

6.51 (3.8)

20.47 (5.6)

18.36 (5.0)

17.24 (4.7)

15.15 (4.1)

14.11 (3.8)

31.67 (5.6)

28.36 (5.0)

26.64 (4.7)

23.35 (4.1)

21.71 (3.8)

42.87 (5.6)

38.36 (5.0)

36.04 (4.7)

31.55 (4.1)

29.31 (3.8)

(1) referred to half wave dipole. Losses of power distribution network not included. (2) without mounting hardware (3) v= 150 km/h Specifications are subject to change without prior notice

66

WIND LOAD kN (3) ch.2 54÷60 MHz

ch.3 60÷66 MHz

ch.4 66÷72 MHz

ch.5 76÷82 MHz

ch.6 82÷88 MHz

3.3 5.0 6.1 6.2 6.6 9.9 12.2 12.8 13.1 19.9 24.3 19.4 19.7 29.3 36.5 26 26.2 39.7 48.6

3.1 4.7 5.6 5.8 6.1 9.3 11.2 12 12.1 18.6 22.3 18 18.1 27.9 33.5 24 24.2 37.2 44.6

2.8 4.3 5.2 5.4 5.6 8.5 10.4 10.9 11.1 16.9 20.8 16.4 16.6 25.3 31.1 22 22.2 33.8 41.5

2.6 3.9 4.9 5 5.2 7.8 9.7 10.1 10.3 15.6 19.3 15.2 15.4 23.4 28.9 20.4 20.6 31.2 38.5

2.5 3.8 4.7 4.9 5.1 7.6 9.2 9.8 10.1 15.2 18.4 14.8 15.2 22.7 27.6 19.8 20.2 30.3 36.8


3VTV-02 (Horizontal polarization) VHF PANEL ANTENNA

FEATURES

VHF ANTENNAS

horizontal polarization broadband 174 ÷ 230 MHz 8 dB gain directional pattern suitable as a component in various arrays suitable also for vertical polarization

RADIATION PATTERNS (Mid Band)

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

0

3VTV-02/E 174 ÷ 230 MHz 50 ohm 7/8” EIA or 7/16 F 3 kW (7/8” EIA), 2.5 kW (7/16 F) ≤1.1 Horizontal 8 dB E-Plane ± 32° H-Plane ± 30° All Metal Parts DC Grounded

0

3VTV-02

270

90

270

90

10 6

10 6

3 1 dB

3 1 dB

180

180

VSWR 1,30 1,25

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (kN) 150 Km/h MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

1,20

1300x1300x535 mm 1300x1300x513 mm 29 kg 27 kg 2 0.76 m 0.67 m2 0.83 kN 0.73 kN 220 km/h Reflector (hot dip galvanized steel) Dipole (stainless steel) Internal parts (silver plated brass, deoxidized aluminium) Radome (fiberglass) Feed point radome (only for 3VTV-02) Grey (standard) Directly on supporting mast or tower

1,15 1,10 1,05 1,00 174

182

198

206

214

222

230

FREQ. (MHz) GAIN (dB) 10 9 8 7 6 5 4 174

182

Specifications are subject to change without prior notice

67

190

190

198

206

214

222

230

FREQ. (MHz)


3VTV-02 (Horizontal polarization) VHF PANEL ANTENNA

FEATURES

VHF ANTENNAS

radiating systems with 3VTV-02 panel high power antenna systems omnidirectional or directional patterns equal or unequal power split ratio distribution network

UHF ANTENNAS ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING VSWR POLARIZATION GAIN HORIZONTAL PATTERN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE

174 รท 230 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ‰ค1.05 in the operating channels Horizontal Refer to table Any type according to requirement Null fill,beam tilt and special requirements to order The antenna system can be supplied in split feed configuration with two equal halves. Each half can accept full power

Subject to number of bays Refer to table Refer to table Yes Grey (standard) Available upon request Specifications are subject to change without prior notice

68


3VTV-02 (Horizontal polarization) VHF PANEL ANTENNA

VHF ANTENNAS

HORIZONTAL PATTERNS WITH OFFSET 2, 3 AND 4 FACES AT 200 MHz

TECHNICAL DATA NUMBER PANELS OF PER BAYS BAY 1 2 2 3 4 1 4 2 3 4 1 6 2 3 4 1 8 2 3 4 1 12 2 3 4 1 16 2 3 4

GAIN dB (1) 11 8 6.2 5 14 11 9.2 8 15.9 12.9 11.1 9.9 17 14 12.2 11 18.9 15.9 14.1 12.9 20 17 15.2 14

GAIN TIMES (1) 12.6 6.3 4.2 3.2 25.1 12.6 8.3 6.3 38.9 19.5 12.8 9.8 50.1 25.1 16.6 12.6 77.6 38.9 25.7 19.5 100 50.1 33.1 25.1

WEIGHT kg (2a) 70 135 200 270 135 270 420 610 200 420 690 860 270 610 860 1115 420 860 1380 1720 610 1115 1720 2225

WEIGHT kg (2b) 66 127 188 254 127 254 396 578 188 396 654 812 254 578 812 1051 396 812 1308 1624 578 1051 1624 2097

ANTENNA HEIGHT L m 2.9

6.1

9.3

12.5

18.9

25.3

WIND LOAD (3a) kN 1.66 2.80 3.65 4.48 3.32 5.56 7.30 8.97 4.98 8.42 10.95 13.45 6.64 11.24 14.60 17.95 9.96 16.86 21.86 26.90 13.30 22.48 29.20 35.90

WIND LOAD (3b) kN 1.34 2.16 2.70 3.20 2.68 4.28 5.38 6.42 4.02 6.51 8.07 9.62 5.36 8.68 10.76 12.83 8.04 13.02 16.12 19.25 10.72 17.37 21.53 25.68

(1) referred to half wave dipole. Losses of power distribution network not included. (2a) for 3vtv-02 and without mounting hardware. (2b) for 3vtv-02/E and without mounting hardware. (3a) for 3vtv-02 (v= 150 km/h) - (3b) for 3vtv-02/E (v= 150 km/h) Specifications are subject to change without prior notice

69


3VTV-02 (Horizontal polarization) VHF PANEL ANTENNA

HORIZONTAL PATTERNS 2 AND 3 FACES AT 200 MHz

VHF ANTENNAS UHF ANTENNAS TECHNICAL DATA NUMBER PANELS OF PER BAYS BAY 1 2 2 3 1 4 2 3 1 6 2 3 1 8 2 3 1 12 2 3 1 16 2 3

GAIN dB (1) 10 7 5.2 13 10 8.2 14.9 11.9 10.1 16 13 11.2 17.9 14.9 13.1 19 16 14.2

GAIN TIMES (1) 10 5 3.3 20 10 6.6 30.9 15.5 10.2 40 20 13.2 61.6 30.9 20.4 80 40 26.3

WEIGHT kg (2a) 70 135 200 135 270 420 200 420 690 270 610 860 420 860 1380 610 1115 1720

WEIGHT kg (2b) 66 127 188 127 254 396 188 396 654 254 578 812 396 812 1308 578 1051 1624

ANTENNA HEIGHT L m 2.9

6.1

9.3

12.5

18.9

25.3

WIND LOAD (3a) kN 1.59 2.38 3.36 3.18 4.76 6.72 4.77 7.14 10.08 6.36 9.52 13.44 9.55 14.28 20.16 12.73 19.04 26.87

WIND LOAD (3b) kN 1.40 2.09 2.95 2.80 4.18 5.91 4.20 6.28 8.86 5.60 8.37 11.82 8.40 12.56 17.73 11.20 16.75 23.63

(1) referred to half wave dipole. Losses of power distribution network not included. (2a) for 3vtv-02 and without mounting hardware. - (2b) for 3vtv-02/E and without mounting hardware. (3a) for 3vtv-02 (v= 150 km/h) - (3b) for 3vtv-02/E (v= 150 km/h) Specifications are subject to change without prior notice

70


3VTV-02 (Horizontal polarization) VHF PANEL ANTENNA

DIMENSIONAL DETAILS

VERTICAL PATTERN Without null fill

VHF ANTENNAS

With null fill and beam tilt

Specifications are subject to change without prior notice

71


3VTV-02 (Vertical polarization) VHF PANEL ANTENNA

FEATURES

VHF ANTENNAS

vertical polarization broadband 174 ÷ 230 MHz 8 dB gain directional pattern suitable as a component in various arrays suitable also for horizontal polarization

UHF ANTENNAS

RADIATION PATTERNS (Mid Band)

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

0

3VTV-02/E 174 ÷ 230 MHz 50 ohm 7/8” EIA or 7/16 F 3 kW (7/8” EIA), 2.5 kW (7/16 F) ≤1.1 Vertical 8 dB E-Plane ± 32° H-Plane ± 30° All Metal Parts DC Grounded

0

3VTV-02

270

90

270

90

10 6

10 6

3 1 dB

3 1 dB

180

180

VSWR 1,30 1,25

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (kN) 150 Km/h MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

1,20

1300x1300x535 mm 1300x1300x513 mm 29 kg 27 kg 2 0.76 m 0.67 m2 0.83 kN 0.73 kN 220 km/h Reflector (hot dip galvanized steel) Dipole (stainless steel) Internal parts (silver plated brass, deoxidized aluminium) Radome (fiberglass) Feed point radome (only for 3VTV-02) Grey (standard) Directly on supporting mast or tower

1,15 1,10 1,05 1,00 174

182

198

206

214

222

230

FREQ. (MHz) GAIN (dB) 10 9 8 7 6 5 4 174

182

Specifications are subject to change without prior notice

72

190

190

198

206

214

222

230

FREQ. (MHz)


3VTV-02 (Vertical polarization) VHF PANEL ANTENNA

FEATURES

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING VSWR POLARIZATION GAIN HORIZONTAL PATTERN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE

VHF ANTENNAS

radiating systems with 3VTV-02 panel high power antenna systems omnidirectional or directional patterns equal or unequal power split ratio distribution network

174 รท 230 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ‰ค1.05 in the operating channels Horizontal Refer to table Any type according to requirement Null fill,beam tilt and special requirements to order The antenna system can be supplied in split feed configuration with two equal halves Each half can accept full power

3VTV-02V/8 (8x1) MONTE FAITO, ITALY

Subject to number of bays Refer to table Refer to table Yes Grey (standard) Available upon request Specifications are subject to change without prior notice

73


3VTV-02 (Vertical polarization) VHF PANEL ANTENNA

HORIZONTAL PATTERNS WITH OFFSET 2, 3 AND 4 FACES AT 200 MHz

VHF ANTENNAS UHF ANTENNAS

TECHNICAL DATA NUMBER PANELS OF PER BAYS BAY 1 2 2 3 4 1 4 2 3 4 1 6 2 3 4 1 8 2 3 4 1 12 2 3 4 1 16 2 3 4

GAIN dB (1) 11 8 6.2 5 14 11 9.2 8 15.9 12.9 11.1 9.9 17 14 12.2 11 18.9 15.9 14.1 12.9 20 17 15.2 14

GAIN TIMES (1) 12.6 6.3 4.2 3.2 25.1 12.6 8.3 6.3 38.9 19.5 12.8 9.8 50.1 25.1 16.6 12.6 77.6 38.9 25.7 19.5 100 50.1 33.1 25.1

WEIGHT kg (2a) 70 135 200 270 135 270 420 610 200 420 690 860 270 610 860 1115 420 860 1380 1720 610 1115 1720 2225

WEIGHT kg (2b) 66 127 188 254 127 254 396 578 188 396 654 812 254 578 812 1051 396 812 1308 1624 578 1051 1624 2097

ANTENNA HEIGHT L m 2.9

6.1

9.3

12.5

18.9

25.3

WIND LOAD (3a) kN 1.66 2.80 3.65 4.48 3.32 5.56 7.30 8.97 4.98 8.42 10.95 13.45 6.64 11.24 14.60 17.95 9.96 16.86 21.86 26.90 13.30 22.48 29.20 35.90

WIND LOAD (3b) kN 1.34 2.16 2.70 3.20 2.68 4.28 5.38 6.42 4.02 6.51 8.07 9.62 5.36 8.68 10.76 12.83 8.04 13.02 16.12 19.25 10.72 17.37 21.53 25.68

(1) referred to half wave dipole. Losses of power distribution network not included. (2a) for 3vtv-02 and without mounting hardware. - (2b) for 3vtv-02/E and without mounting hardware. (3a) for 3vtv-02 (v= 150 km/h) - (3b) for 3vtv-02/E (v= 150 km/h) Specifications are subject to change without prior notice

74


3VTV-02 (Vertical polarization) VHF PANEL ANTENNA

DIMENSIONAL DETAILS

VERTICAL PATTERN Without null fill With null fill and beam tilt

VHF ANTENNAS

- UP -

Specifications are subject to change without prior notice

75


3VTV-04

VHF PANEL ANTENNA

FEATURES

VHF ANTENNAS

horizontal polarization broadband 174 ÷ 230 MHz 11 dB gain directional pattern suitable as a component in various arrays

UHF ANTENNAS

RADIATION PATTERNS (Mid Band)

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

0

3VTV-04/E 174 ÷ 230 MHz 50 ohm 7/8” EIA 3 kW ≤1.1 Horizontal 11 dB E-Plane ± 32° H-Plane ± 13° All Metal Parts DC Grounded

0

3VTV-04

270

90

270

90

10 6

10 6

3 1 dB

3 1 dB

180

180

VSWR 1,30 1,25

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (kN) 150 Km/h MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

1,20

2800x1300x520 mm 2800x1300x497 mm 79 kg 75.5 kg 2 1.62 m 1.44 m2 1.77 kN 1.57 kN 220 km/h Reflector (hot dip galvanized steel) Dipole (stainless steel) Internal parts (silver plated brass, deoxidized aluminium) Radome (fiberglass) Feed point radome (only for 3VTV-04) Grey (standard) Directly on supporting mast or tower

1,15 1,10 1,05 1,00 174

182

198

206

214

222

230

FREQ. (MHz) GAIN (dB) 14 13 12 11 10 9 8 174

182

Specifications are subject to change without prior notice

76

190

190

198

206

214

222

230

FREQ. (MHz)


3VTV-04

VHF PANEL ANTENNA

FEATURES

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING VSWR POLARIZATION GAIN HORIZONTAL PATTERN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE

VHF ANTENNAS

radiating systems with 3VTV-04 panel high power antenna systems omnidirectional or directional patterns equal or unequal split ratio power distribution network

174 รท 230 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ‰ค1.05 in the operating channels Horizontal Refer to table Any type according to requirement Null fill,beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves). Each half can accept full power.

3VTV-04/16 (4x4) in TURKEY

Subject to number of bays Refer to table Refer to table Yes Grey (standard) Available upon request Specifications are subject to change without prior notice

77


3VTV-04

VHF PANEL ANTENNA

HORIZONTAL PATTERNS WITH OFFSET 2,3 AND 4 FACES AT 200 MHz 0

0

270

90

270

VHF ANTENNAS

10

10

6 3 1 dB

6 3 1 dB

180

180

0

270

90 10

UHF ANTENNAS

6 3 1 dB 180

TECHNICAL DATA NUMBER PANELS OF PER BAYS BAY 1 1 2 3 4 1 2 2 3 4 1 4 2 3 4 1 6 2 3 4 1 8 2 3 4

GAIN dB (1) 11 8 6.2 5 14 11 9.2 8 17 14 12.3 11 18.9 15.9 14 12.9 20 17 15.3 14

GAIN TIMES (1) 12.6 6.3 4.2 3.2 25.1 12.6 8.3 6.3 50.1 25.1 16.9 12.6 77.6 38.9 25.1 19.5 100 50.1 33.9 25.1

90

WEIGHT kg (2a) 79 170 257 346 170 346 537 729 346 729 1064 1389 537 1064 1582 2101 729 1389 2101 2756

WEIGHT kg (2b) 75 163 247 332 163 332 516 701 332 701 1022 1333 516 1022 1519 2017 701 1333 2017 2644

ANTENNA HEIGHT L m 2.8

6

12.4

18.8

25.2

WIND LOAD (3a) kN 1.77 2.98 3.87 4.75 3.54 5.96 7.74 9.51 7.08 11.92 15.48 19.03 10.62 17.89 23.21 28.54 14.16 23.85 30.95 38.06

WIND LOAD (3b) kN 1.57 2.64 3.43 4.22 3.14 5.28 6.86 8.44 6.28 10.57 13.73 16.88 9.42 15.86 20.59 25.32 12.56 21.15 27.46 33.76

(1) referred to half wave dipole. Losses of power distribution network not included. (2a) for 3vtv-02 and without mounting hardware. - (2b) for 3vtv-02/E and without mounting hardware. (3a) for 3vtv-02 (v= 150 km/h) - (3b) for 3vtv-02/E (v= 150 km/h) Specifications are subject to change without prior notice

78


3VTV-04

VHF PANEL ANTENNA

VHF ANTENNAS

HORIZONTAL PATTERNS 2 AND 3 FACES AT 200 MHz

TECHNICAL DATA NUMBER PANELS OF PER BAYS BAY 1 1 2 3 1 2 2 3 1 4 2 3 1 6 2 3 1 8 2 3

GAIN dB (1) 10 7 5.2 13 10 8.2 16 13 5.3 17.9 14.9 13 19 16 14.2

GAIN TIMES (1) 10 5 3.3 20 10 6.8 39.8 20 3.4 61.6 30.9 20 79.4 39.8 26.3

WEIGHT kg (2a) 79 170 257 170 346 537 346 729 1064 537 1064 1582 729 1389 2101

WEIGHT kg (2b) 75 163 247 163 332 516 332 701 1022 516 1022 1519 701 1333 2017

ANTENNA HEIGHT L m 2.8

6

12.4

18.8

25.2

WIND LOAD (3a) kN 1.77 2.58 3.56 3.39 5.07 7.16 6.78 10.15 14.33 10.18 15.23 21.50 13.58 20.31 28.66

WIND LOAD (3b) kN 1.57 2.29 3.15 3.01 4.50 6.35 6.02 9.00 12.71 9.03 13.51 19.07 12.04 18.01 25.42

(1) referred to half wave dipole. Losses of power distribution network not included. (2a) for 3vtv-02 and without mounting hardware. - (2b) for 3vtv-02/E and without mounting hardware. (3a) for 3vtv-02 (v= 150 km/h) - (3b) for 3vtv-02/E (v= 150 km/h) Specifications are subject to change without prior notice

79


3VTV-04

VHF PANEL ANTENNA

DIMENSIONAL DETAILS

VERTICAL PATTERNS Without null fill With null fill and beam tilt

- UP VHF ANTENNAS UHF ANTENNAS Specifications are subject to change without prior notice

80


3VTV-05

VHF LOG. PERIODIC ANTENNA

FEATURES

VHF ANTENNAS

horizontal or vertical polarization broadband 174 ÷ 230 MHz 8.5 dB gain directional pattern

RADIATION PATTERNS (Mid Band)

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION MOUNTING

3VTV-05 174 ÷ 230 MHz 50 ohm NF 0.5 kW ≤ 1.2 Horizontal or Vertical 8.5 dB E-Plane ± 26° H-Plane ± 33° All Metal Parts DC Grounded

VSWR

2400 x 862 x 200 mm 30 kg 0.28 m2 30 kg (wind speed 150 km/h) 220 km/h External (galvanized steel) Internal (silver plated aluminium, noryl) Radome (fiberglass) Feed point radome Special pipe clamps included

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

81

FREQ. (MHz)


3VTV-10

VHF (BIII) / DAB YAGI ANTENNA

FEATURES

VHF ANTENNAS

horizontal or vertical polarization bandwidth 198 ÷ 223 MHz 4.5 dB gain directional pattern stainless steel

D: 448 mm

UHF ANTENNAS

RADIATION PATTERNS (Mid Band)

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

3VTV-10 198 ÷ 223 MHz 50 ohm 7/8”EIA 3 kW ≤ 1.15 Vertical or Horizontal 4.5 dB E-Plane ± 33° H-Plane ± 62° All Metal Parts DC Grounded

VSWR

898 x 820 x 160 mm 9 kg 0.08 m2 0.10 kN (wind speed 150 km/h) 220 km/h External parts (stainless steel) Internal parts (silver plated brass, polished brass,deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) Directly on supporting mast

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

82

FREQ. (MHz)


3VTV-10/A

VHF (BIII) / DAB YAGI ANTENNA

FEATURES

VHF ANTENNAS

horizontal or vertical polarization bandwidth 174 ÷ 181 MHz 4.5 dB gain directional pattern stainless steel

D: 448 mm

RADIATION PATTERNS (Mid Band)

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

3VTV-10/A 174 ÷ 181 MHz 50 ohm 7/8”EIA 3 kW ≤ 1.2 Vertical or Horizontal 4.5 dB E-Plane ± 33° H-Plane ± 62° All Metal Parts DC Grounded

VSWR

898 x 820 x 160 mm 10 kg 0.08 m2 0.10 kN (wind speed 150 km/h) 220 km/h External parts (stainless steel) Internal parts (silver plated brass, polished brass,deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) Directly on supporting mast

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

83

FREQ. (MHz)


3VTV-11/A

VHF (BIII) / DAB DIPOLE ANTENNA

FEATURES

VHF ANTENNAS

vertical polarization bandwidth 174 ÷ 195 MHz 2 dB gain suitable for various patterns stainless steel

D: 500 ÷ 600 mm

UHF ANTENNAS

RADIATION PATTERNS (Mid Band) 0

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) LIGHTNING PROTECTIO

270

3VTV-11/A 174 ÷ 195 MHz 50 ohm 7/8”EIA 3 kW ≤ 1.25 Vertical 2 dB (D=550mm) All Metal Parts DC Grounded

90 10 6 3 1 dB 180

0

270

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

946 x 605 x 160 mm 9.5 kg 0.10 m2 0.08 kN (wind speed 150 km/h) 220 km/h External parts (stainless steel, nickel plated brass) Internal parts (silver plated brass, polished brass,deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) Directly on supporting mast

10 6 3 1 dB 180

VSWR

Specifications are subject to change without prior notice

84

90

FREQ. (MHz)


3VTV-11/B

VHF (BIII) / DAB DIPOLE ANTENNA

FEATURES

VHF ANTENNAS

vertical polarization bandwidth 195 ÷ 216 MHz 2 dB gain suitable for various patterns stainless steel

D: 450 ÷ 600 mm

RADIATION PATTERNS (Mid Band) 0

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) LIGHTNING PROTECTION

270

3VTV-11/B 195 ÷ 216 MHz 50 ohm 7/8”EIA 3 kW ≤ 1.25 Vertical 2 dB (D=450mm) All Metal Parts DC Grounded

90 10 6 3 1 dB 180

0

270

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

946 x 605 x 160 mm 9.5 kg 0.10 m2 0.08 kN (wind speed 150 km/h) 220 km/h External parts (stainless steel, nickel plated brass) Internal parts (silver plated brass, polished brass,deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) Directly on supporting mast

10 6 3 1 dB 180

VSWR

Specifications are subject to change without prior notice

85

90

FREQ. (MHz)


3VTV-11

VHF (BIII) / DAB DIPOLE ANTENNA

FEATURES

VHF ANTENNAS

vertical polarization bandwidth 217.5 ÷ 230 MHz 2 dB gain suitable for various patterns stainless steel

D: 450 ÷ 600 mm

UHF ANTENNAS

RADIATION PATTERNS (Mid Band) 0

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) LIGHTNING PROTECTION

270

3VTV-11 217.5 ÷ 230 MHz 50 ohm 7/8”EIA 3 kW ≤ 1.25 Vertical 2 dB (D=450mm) All Metal Parts DC Grounded

90 10 6 3 1 dB 180

0

270

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

946 x 605 x 160 mm 9.5 kg 0.10 m2 0.08 kN (wind speed 150 km/h) 220 km/h External parts (stainless steel, nickel plated brass) Internal parts (silver plated brass, polished brass,deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) Directly on supporting mast

10 6 3 1 dB 180

VSWR

Specifications are subject to change without prior notice

86

90

FREQ. (MHz)


3VTV-11/P

VHF (BIII) / DAB DIPOLE ANTENNA

FEATURES

VHF ANTENNAS

vertical polarization bandwidth 217.5 ÷ 230 MHz 2 dB gain suitable for various patterns stainless steel

D: 450 ÷ 600 mm

RADIATION PATTERNS (Mid Band) 0

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) LIGHTNING PROTECTION

270

3VTV-11/P 217.5 ÷ 230 MHz 50 ohm 1-5/8”EIA 5 kW ≤ 1.25 Vertical 2 dB (D=450mm) All Metal Parts DC Grounded

90 10 6 3 1 dB 180

0

270

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

1010 x 605 x 160 mm 10 kg 0.11 m2 0.09 kN (wind speed 150 km/h) 220 km/h External parts (stainless steel, nickel plated brass) Internal parts (silver plated brass, polished brass,deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) Directly on supporting mast

10 6 3 1 dB 180

VSWR

Specifications are subject to change without prior notice

87

90

FREQ. (MHz)


3VTV-15

VHF (BIII) / DAB YAGI ANTENNA

FEATURES

VHF ANTENNAS

horizontal or vertical polarization bandwidth 215 ÷ 230 MHz 4.5 dB gain directional pattern stainless steel

D: 448 mm

UHF ANTENNAS

RADIATION PATTERNS (Mid Band) 0

0

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

3VTV-15 215 ÷ 230 MHz 50 ohm 7/8”EIA 3 kW ≤ 1.15 Vertical or Horizontal 4.5 dB E-Plane ± 34° H-Plane ± 60° All Metal Parts DC Grounded

90

270

90

270

10

10

6

6

3 1 dB

3 1 dB

180

180

H-Plane

E-Plane

VSWR

898 x 820 x 160 mm 9 kg 0.08 m2 0.10 kN (wind speed 150 km/h) 220 km/h External parts (stainless steel) Internal parts (silver plated brass, polished brass,deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) Directly on supporting mast

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

88

FREQ. (MHz)


3VTV-16/A

VHF (BIII) / DAB YAGI ANTENNA

FEATURES

VHF ANTENNAS

horizontal or vertical polarization bandwidth 174 ÷ 223 MHz 4.8 dB gain directional pattern stainless steel

D: 560 mm

RADIATION PATTERNS (Mid Band)

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

0

0

3VTV-16/A 174 ÷ 223 MHz 50 ohm 7/8”EIA 3 kW ≤ 1.22 (Horizontal ø 100 mm pole) ≤ 1.25 (Vertical ø 100 mm pole) Vertical or Horizontal 4.8 dB E-Plane ± 32° H-Plane ± 62° All Metal Parts DC Grounded

90

270

90

270

10

10

6

6

3 1 dB

3 1 dB

180

180

H-Plane

E-Plane

VSWR 1,30 1,25 1,20

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

1,15

1010 x 820 x136 mm 10.5 kg 0.16 m2 0.21 kN (wind speed 150 km/h) 220 km/h External parts (stainless steel) Internal parts (silver plated brass, polished brass,deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) With special pipe clamps ø 60 ÷ 114 mm

1,10 1,05 1,00 174

194

204

214

224

FREQ. (MHz) GAIN (dB) 6 5 4 3 2 1 0 174

Specifications are subject to change without prior notice

89

184

184

194

204

214

224

FREQ. (MHz)


3VTVC-02

VHF (BIII) / DAB PANEL ANTENNA

FEATURES

VHF ANTENNAS

H, V, circular or elliptical polarization broadband: pol. H: 174 ÷ 230 MHz pol. V: 174 ÷ 240 MHz 7.5 dB gain directional pattern suitable as a component in various arrays on square towers stainless steel dipoles HORIZONTAL RADIATION PATTERNS (Mid Band) 0

UHF ANTENNAS

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

3VTVC-02 Pol. H: 174 ÷ 230 MHz Pol. V: 174 ÷ 240 MHz 50 ohm 2 x 7/8” EIA 6 kW (3 k W per connector) ≤ 1.2 Horizontal, Vertical, Circular/Elliptical 7.5 dB (linear polarization) Pol. H: E-Plane ± 30° H-Plane ± 27° Pol. V: E-Plane ± 32° H-Plane ± 30° All metal parts DC grounded

0

270

90

270

90

10 6

10 6

3

3

1 dB

1 dB

180

180

Horizontal Polarization (H-Plane)

Vertical Polarization (E-Plane)

VSWR (H-Pol) 1,30 1,25 1,20 1,15 1,10 1,05 1,00 174

182

190

198

206

214

222

230

FREQ. (MHz)

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

VSWR (V-Pol)

1300 x 1300 x 620 mm 50 kg 0.81 m2 1.13 kN (wind speed 150 km/h) 220 km/h Reflector (hot dip galvanized steel) Dipoles (stainless steel) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) Directly on supporting mast or tower

1,30 1,25 1,20 1,15 1,10 1,05 1,00

174

218

240

FREQ. (MHz) GAIN (dB) 10 9 8 7 6 5 4 174

Specifications are subject to change without prior notice

90

196

196

218

240

FREQ. (MHz)


3VTVC-02

VHF (BIII) / DAB PANEL ANTENNA

FEATURES

ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING VSWR POLARIZATION GAIN HORIZONTAL PATTERN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE RADOME COLOUR MOUNTING HARDWARE

VHF ANTENNAS

radiating systems with 3VTVC-02 panel high power antenna systems omnidirectional or directional patterns equal or unequal power split ratio distribution network

Pol. H: 174 รท 230 MHz Pol. V: 174 รท 240 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ‰ค1.1 in the operating channels Linear, Circular / Elliptical on request Refer to table Any type according to requirement Null fill,beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves) Each half can accept full power

3VTVC-02/40 (10x4) HRP Test for WINNIPEG Station, CANADA

Subject to number of bays Refer to table Refer to table Yes Grey (standard) Available upon request Specifications are subject to change without prior notice

91


3VTVC-02

VHF (BIII) / DAB PANEL ANTENNA

HORIZONTAL PATTERNS WITH 2, 3 AND 4 FACES AT 200 MHz

VHF ANTENNAS UHF ANTENNAS

TECHNICAL DATA NUMBER OF BAYS 1

2

4

6

8

PANELS PER BAY

GAIN dB (1)

GAIN TIMES (1)

WEIGHT kG (2)

2 3 4 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

5.7 3.8 2.3 11.4 8.6 6.8 5.4 14.4 11.6 9.8 8.4 16.1 13.3 11.6 10.1 17.4 14.6 12.8 11.4

3.71 2.39 1.70 13.80 7.24 4.78 3.46 27.54 14.45 9.54 6.91 40.73 21.37 14.45 10.23 54.95 28.84 19.05 13.80

151 241 298 151 298 477 612 298 612 876 1172 477 876 1363 1775 612 1172 1775 2289

ANTENNA WIND LOAD HIGHT L kN m (3) 1.3

2.9

6.1

9.3

12.5

2.80 3.48 4.18 2.28 5.60 6.97 8.36 4.56 11.21 13.94 16.70 6.86 16.82 20.92 25.06 9.15 22.43 27.90 33.42

(1) referred to linear polarization and to half wave dipole. Losses of power distribution network not included. (2) without mounting hardware (3) v= 150 km/h Specifications are subject to change without prior notice

92


3VTVC-02

VHF (BIII) / DAB PANEL ANTENNA

DIMENSIONAL DETAILS

VERTICAL PATTERN Without null fill

VHF ANTENNAS

With null fill and beam tilt

Specifications are subject to change without prior notice

93


UHF Antennas

97

UTV-02

101

UTV-12

105

UTV-03

109

UTV-02 LB

110

UTVC-01

111

UTV-07 / 08

112

UTV-11

113

UTV-14

114

UTV-15

115

95

UHF ANTENNAS

UTV-01 / 05


UTV-01/UTV-05

UHF PANEL ANTENNA

FEATURES

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

UTV-01 UTV-05 470 ÷ 860 MHz 50 ohm 2 x 7/8” EIA 7/16 F or 7/8” EIA 90° 2 x 2.5 kW 1.5 kW (7/16 F) 2.5 kW (7/8” EIA 90°) ≤ 1.1 ≤ 1.1 Horizontal 12 dB E-Plane ± 32° H-Plane ± 12° All metal parts DC grounded

Other models available: UTV-01/E white radome only UTV-01/EE white radome only, 7/16 straight Input connector only UTV-01/P 5kW 1-5/8” EIA 90° Input connector UTV-05/D 2x7/8” EIA straight Input connector only

UHF ANTENNAS

horizontal polarization broadband 470 ÷ 860 MHz 12 dB gain directional pattern suitable as a component in various arrays

RADIATION PATTERNS (Mid Band)

VSWR 1,30

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

1,25

1000 x 450 x 280 mm (7/8” EIA 90°) 13.5 kg 0.45 m 0.62 kN (wind speed 150 km/h) 220 km/h Reflector (stainless steel) Dipoles (stainless steel) Internal parts (plated brass) Radome (fiberglass) Full radome Orange - Green - White (standard) Directly on supporting mast or with special pipe clamps 2

1,20 1,15 1,10 1,05 1,00 460

620

700

780

860

FREQ. (MHz) GAIN (dB) 14 13 12 11 10 9 8 460

Specifications are subject to change without prior notice

97

540

540

620

700

780

860

FREQ. (MHz)


UTV-01/UTV-05

UHF PANEL ANTENNA

FEATURES radiating systems with UTV-01/UTV-05 panels very high power systems omnidirectional or directional patterns equal or unequal split ratio power distribution network

UHF ANTENNAS ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING VSWR POLARIZATION GAIN HORIZONTAL PATTERN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE G.R.P. CYLINDER COLOUR MOUNTING HARDWARE

470 ÷ 860 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements ≤1.05 in the operating channels Horizontal Refer to table Any type according to requirement Null fill,beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves). Each half can accept full power.

UTV-01/40 (8+8+12+12) MONTE SERPEDDI’, ITALY

Subject to number of bays Refer to table Refer to table Yes Orange - White (optional) Available upon request Specifications are subject to change without prior notice

98


UTV-01/UTV-05

UHF PANEL ANTENNA

TECHNICAL DATA NUMBER PANELS OF PER BAY BAY 1 2 2 3 4 1 2 4 3 4 1 2 6 3 4 1 2 8 3 4 1 2 10 3 4 1 2 12 3 4 1 2 16 3 4

GAIN dB (1) 15.1 12.2 10.3 9.1 18.3 15.3 13.5 12.3 20 17 15.3 14 21.3 18.3 16.6 15.3 22.3 19.3 17.6 16.3 23 20.1 18.3 17.1 24.3 21.3 19.6 18.4

GAIN TIMES (1) 32.8 16.6 10.9 8.2 68.1 34 22.6 17 101.2 50.6 33.7 25.3 136.4 68.2 45.4 34.1 172 86.1 57.3 43 204 102 68 51 273.2 136.6 91 68.3

WEIGHT kg (2) 38 84 122 168 84 168 281 400 122 281 378 432 168 400 432 583 224 418 672 896 281 432 843 992 400 583 992 1263

ANTENNA HEIGHT L M 2.15

4.45

6.75

9.05

11.35

13.65

18.25

WIND LOAD (3) KN 1.74 3.82 4.73 4.6 3.59 7.9 9.39 9.12 5.53 12 14.21 13.81 7.31 16.06 19.05 18.5 9.16 18.54 23.86 23.17 11.03 24.21 28.1 28.2 14.73 32.33 37.92 38.82

WIND LOAD (4) KN 4.98 7.06 7.97 7.84 6.83 11.14 12.63 12.36 8.77 15.24 17.45 17.05 10.55 19.3 22.29 21.74 12.4 21.78 27.1 26.41 14.27 27.45 31.34 31.44 17.97 35.57 41.16 42.06

(1) referred to half wave dipole. Losses of power distribution network not included. (2) without mounting hardware,(for UTV-01). (3) Without top mast, v= 150 km/h (4) With top mast, v= 150 km/h Specifications are subject to change without prior notice

99

UHF ANTENNAS

HORIZONTAL PATTERNS WITH OFFSET 2,3 AND 4 FACES AT 650 MHz


UTV-01/UTV-05

UHF PANEL ANTENNA

DIMENSIONAL DETAILS

VERTICAL PATTERNS Without null fill With null fill and beam tilt

- UP -

UTV-01

UHF ANTENNAS

UTV-05

Specifications are subject to change without prior notice

100


UTV-02

UHF PANEL ANTENNA

FEATURES

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

UTV-02 470 ÷ 860 MHz 50 ohm 7/16 F or 7/8”EIA 1.5 kW (7/16 F) , 2.5 kW (7/8” EIA) ≤ 1.1 Vertical 10.5 dB E-Plane ± 15° H-Plane ± 32° All Metal Parts DC Grounded

UHF ANTENNAS

vertical polarization broadband 470 ÷ 860 MHz 10.5 dB gain directional pattern suitable as a component in various arrays

RADIATION PATTERNS (Mid Band) 0

0

90

90 270

270 10

10

6

6

3 1 dB

3 1 dB

H-Plane

E-Plane

VSWR

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

759 x 460 x 228 mm (7/16 F) 759 x 460 x 240.5 mm (7/8”EIA) 12.5 kg 0.35 m2 0.48 kN (wind speed 150 km/h) 220 km/h Reflector (stainless steel) Dipoles (plated copper) Internal parts (silver plated brass) Radome (fiberglass) Full radome Orange - Green - White (standard) Directly on supporting mast or with special pipe clamps

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

101

FREQ. (MHz)


UTV-02

UHF PANEL ANTENNA

FEATURES radiating systems with UTV-02 panels omnidirectional or directional patterns equal or unequal power split ratio distribution network very high power systems broadband 470 รท 860 MHz

UHF ANTENNAS ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING VSWR POLARIZATION GAIN HORIZONTAL PATTERN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE G.R.P. CYLINDER COLOUR MOUNTING HARDWARE

470 รท 860 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ‰ค1.05 in the operating channels Vertical Refer to table Any type according to requirement Null fill,beam tilt and special requirements to order The antenna system can be supplied in split feed configuration with two equal halves Each half can accept full power.

UTV-02/14 (6+2+6) SEGNI, ITALY

Subject to number of bays Refer to table Refer to table Yes Orange / White (optional) Available upon request Specifications are subject to change without prior notice

102


UTV-02

UHF PANEL ANTENNA

HORIZONTAL PATTERNS WITH OFFSET 2,3 AND 4 FACES AT 650 MHz 0

0

270

90

270

90

10

10

6 3 1 dB

6 3 1 dB

180

180 0

GAIN dB (1) 13 10 8.2 7 16 13 11.2 10 17.8 14.8 13 11.8 19 16 14.2 13 20 17 15.8 14 20.8 17.8 16 14.8 22 19 17.2 16

GAIN TIMES (1) 19.9 10 6.6 5 38.8 19.9 13.2 10 60 30.2 19.9 15.1 79.4 39.8 26.4 19.9 100 50 38 25.1 120.2 60.2 39.8 30.2 158.5 136.6 52.5 68.3

WEIGHT kg (2) 38.4 106.4 146.1 193.7 106.4 193.7 294.5 410.7 146.1 294.5 451.8 472.3 193.7 410.7 472.3 642.3 244.1 488 723 976 344.5 572.3 1005.6 1210.8 513.6 742.3 1044.8 1384.4

ANTENNA HEIGHT L m 1.55

3.15

4.75

6.35

7.95

9.55

12.75

WIND LOAD (3) KN 1.24 2.77 3.30 3.14 2.53 5.62 6.70 6.38 3.83 8.48 10.09 9.61 5.14 11.32 13.48 12.84 6.41 14.19 16.88 16.08 7.21 17.06 20.28 19.31 10.29 22.76 27.07 25.78

WIND LOAD (4) KN 4.48 6.01 6.54 6.38 5.77 8.86 9.94 9.62 7.07 11.72 13.33 12.85 8.38 14.56 16.72 16.08 9.65 17.43 20.12 19.32 10.45 20.30 23.52 22.55 13.53 26 30.31 29.02

(1) referred to half wave dipole. Losses of power distribution network not included. (2) without mounting hardware. (3) Without top mast, v= 150 km/h (4) With top mast, v= 150 km/h Specifications are subject to change without prior notice

103

270

90 10 6 3 1 dB 180

UHF ANTENNAS

TECHNICAL DATA NUMBER PANELS OF PER BAY BAY 1 2 2 3 4 1 2 4 3 4 1 2 6 3 4 1 2 8 3 4 1 2 10 3 4 1 2 12 3 4 1 2 16 3 4


UTV-02

UHF PANEL ANTENNA

DIMENSIONAL DETAILS

VERTICAL PATTERNS Without null fill With null fill and beam tilt

- UP -

UHF ANTENNAS Specifications are subject to change without prior notice

104


UTV-12

UHF PANEL ANTENNA

FEATURES

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

UHF ANTENNAS

horizontal polarization broadband 470 ÷ 860 MHz 13 dB gain directional pattern suitable as a component in five-sided arrays

RADIATION PATTERNS (Mid Band) 0

UTV-12 470 ÷ 860 MHz 50 ohm 7/8” EIA 2.5 kW ≤1.18 Horizontal 13 dB E-Plane ± 27° H-Plane ± 12° All metal parts DC grounded

0

90

270

90

270

10

10

6

6

3 1 dB

3 1 dB

E-Plane

H-Plane

VSWR 1,30 1,25 1,20

1000 x 450 x 280 mm 14 kg 0.44 m2 0.61 kN (wind speed 150 km/h) 220 km/h Reflector (stainless steel) Dipoles (aluminium) Internal parts (silver plated brass) Radome (fiberglass) Full radome Orange - Green - White (standard) Directly on supporting mast

1,15 1,10 1,05 1,00 460

620

700

780

860

FREQ. (MHz) GAIN (dB) 14 13 12 11 10 9 8 460

Specifications are subject to change without prior notice

105

540

540

620

700

780

860

FREQ. (MHz)


UTV-12

UHF PANEL ANTENNA

FEATURES radiating systems with UTV-12 panels very high power systems omnidirectional or directional patterns equal or unequal split ratio power distribution network

UHF ANTENNAS ELECTRICAL DATA FREQUENCY RANGE IMPEDANCE CONNECTOR POWER RATING VSWR POLARIZATION GAIN HORIZONTAL PATTERN VERTICAL PATTERN OTHER FEATURES

MECHANICAL DATA HEIGHT OF ARRAY TOTAL NET WEIGHT WIND LOAD PRESSURIZZABLE G.R.P. CYLINDER COLOUR MOUNTING HARDWARE

470 รท 860 MHz 50 ohm EIA flange according to system power rating The antenna system can accept any power according to requirements โ‰ค1.1 in the operating channels Horizontal Refer to table Any type according to requirement Null fill,beam tilt and special requirements to order The antenna system can be supplied in split feed configuration (two equal halves). Each half can accept full power.

UTV-12/60 (12x5) DURRIS, U.K.

Subject to number of bays Refer to table Refer to table Yes Orange - White (optional) Available upon request Specifications are subject to change without prior notice

106


UTV-12

UHF PANEL ANTENNA

TECHNICAL DATA NUMBER PANELS GAIN OF PER dB BAY BAY (1)

GAIN TIMES (1)

WEIGHT kg (2)

ANTENNA HEIGHT L m

WIND LOAD (3) KN

1

5

5.8

3.8

633

1

4.5

2

5

9

7.9

1266

2.15

9

4

5

12.1

16.2

2532

4.45

17.8

6

5

13.8

24

3798

6.75

26.9

8

5

15.2

33.1

5064

9.05

35.7

10

5

16.2

41.7

6330

11.35

44.7

12

5

17

50.1

7600

13.65

54.4

(1) referred to half wave dipole. Losses of power distribution network not included. (2) with pentagonal spine. (3) with top mast, v= 150 km/h Specifications are subject to change without prior notice

107

UHF ANTENNAS

TYPICAL HORIZONTAL PATTERNS OMNIDIRECTIONAL LAYOUT 5 FACES AT 650 MHz


UTV-12

UHF PANEL ANTENNA

DIMENSIONAL DETAILS

VERTICAL PATTERNS Without null fill With null fill and beam tilt

UTV-12

- UP -

UHF ANTENNAS Specifications are subject to change without prior notice

108


UTV-03

UHF PANEL ANTENNA

FEATURES horizontal or vertical polarization broadband 470 ÷ 860 MHz 7 dB gain directional pattern suitable as a component in various arrays

RADIATION PATTERNS (Mid Band) 0

90

270 10 6

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

UHF ANTENNAS

3 1 dB

H-Plane 0

UTV-03 470 ÷ 860 MHz 50 ohm 7/8” EIA 2.5 kW ≤1.1 Horizontal or Vertical 7 dB E-Plane ± 32° H-Plane ± 32° All metal parts DC grounded

90

270 10 6 3 1 dB

E-Plane

VSWR 1.30 1.25

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

1.20 1.15

450 x 450 x 270 mm 9 kg 0.2 m2 0.28 kN (wind speed 150 km/h) 220 km/h Reflector (stainless steel) Dipoles (plated copper) Internal parts (silver plated brass) Radome (fiberglass) Full radome Orange - White (standard) Directly on supporting mast or with special pipe clamps

1.10 1.05 1.00 460

620

700

780

860

FREQ. (MHz) GAIN (dB) 10 9 8 7 6 5 4 460

Specifications are subject to change without prior notice

109

540

540

620

700

780

860

FREQ. (MHz)


UTV-02/LB

UHF PANEL ANTENNA

FEATURES vertical polarization broadband 470 ÷ 702 MHz 11  dB gain directional pattern   suitable as a component in various arrays

UHF ANTENNAS

RADIATION PATTERNS (Mid Channel)

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

UTV-02/LB 470 ÷ 702 MHz 50 ohm 7/16 F or 7/8” EIA 1.5kW (7/16 F), 2.5kW (7/8”EIA) ≤ 1.1 Vertical 11 dB E-Plane : ± 14° H-Plane: ± 30° All Metal Parts DC Grounded

1000 x 450 x 280 mm 15.4 kg 0.45 m2 0.62 kN (wind speed at 150 km/h) 220 km/h Reflector (hot dip galvanized steel) Dipoles (plated copper) Internal parts (silver plated brass) Radome (fiberglass) Full radome Orange - Green - White (standard) Directly on supporting mast or with speccial pipe clamps

VSWR

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

110

FREQ. (MHz)


UTVC-01

UHF PANEL ANTENNA

FEATURES

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH

UTVC-01 470 ÷ 558 MHz 50 ohm 2 x 7/8” EIA 2 x 2.5 kW ≤ 1.18 Horizontal and Vertical 11 dB Horizontal-Plane ± 31° Vertical-Plane ± 16° 27 dB All metal parts of the antenna are DC grounded. The inner conductor is coupled capacitively.

ISOLATION LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

1133 x 694 x 275 mm 24 kg 0.8 m2 1.1 kN (wind speed 150 km/h) 220 km/h Reflector (stainless steel) Internal parts (plated brass) Radome (fiberglass) Full radome Red - White - Green (standard) Directly on supporting mast or with special pipe clamps

RADIATION PATTERNS (Mid Band)

UHF ANTENNAS

dual polarization broadband 470 ÷ 558 MHz 11 dB gain directional pattern suitable as a component in various arrays

HORIZONTAL POLARIZATION 0

0

90

270

90

270

10

10

6

6

3 1 dB

3 1 dB

Vertical-Plane

Horizontal-Plane

VERTICAL POLARIZATION 0

90

270

90

270

10

10

6

6

3 1 dB

3 1 dB

Vertical-Plane

Specifications are subject to change without prior notice

111

0

Horizontal-Plane


UTV-07/UTV-08

UHF PANEL ANTENNA

FEATURES horizontal or vertical polarization broadband 470 ÷ 860 MHz 14 dB gain directional pattern with ultra narrow beam and very low side/back lobes designed to solve co-channel interference problems on transposers sites

UHF ANTENNAS

RADIATION PATTERNS (Mid Band) 0

0

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

UTV-07 UTV-08 470 ÷ 860 MHz 50 ohm 7/8” EIA 0.5 kW ≤ 1.5 HORIZONTAL VERTICAL 14 dB E-Plane ± 7° E-Plane ± 32° H-Plane ± 32° H-Plane ± 7° All Metal Parts DC Grounded

90 270

270

90

10

10

6

6

3

3

1 dB

1 dB

180

180

VSWR 1,50 1,40 1,30 1,20 1,10

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

2390 x 450 x 243 mm 56 kg 1.07 m2 1.48 kN (wind speed 150 km/h) 220 km/h Reflector (aluminium) Internal parts (plated brass and copper) Radome (fiberglass) Full radome Green (standard) Directly on supporting mast or with pipe clamps ø 60 ÷ 115 mm (optional)

1,00 460

620

700

780

860

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

112

540

FREQ. (MHz)


UTV-11

UHF SUPERTURNSTILE ANTENNA

FEATURES horizontal polarization broadband 470 ÷ 860 MHz omnidirectional pattern self supporting radome ø 330

ELECTRICAL DATA UHF ANTENNAS

ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) LIGHTNING PROTECTION

NUMBER OF BAYS 1 2 4 UTV-11/1 UTV-11/2 UTV-11/4 470 ÷ 860 MHz 50 ohm 7/8” EIA 1-5/8” EIA 2 kW 5 kW ≤1.1 Horizontal 5 dB 8 dB 11 dB All metal parts DC grounded

RADIATION PATTERNS (Mid Band)

MECHANICAL DATA

DIAMETER ANTENNA HEIGHT “L” WEIGHT WIND SURFACE WIND LOAD (wind speed at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

NUMBER OF BAYS 1 2 4 420 mm 1186 mm 2286 mm 5110 mm 40 kg 60 kg 135 kg 0.39 m2 0.75 m2 1.69 m2 0.31 kN 0.60 kN 1.36 kN 220 km/h Dipoles (galvanized steel) Internal parts (silver plated brass) Radome (fiberglass) Supporting frame (galvanized steel) Full radome Grey Directly on top of existing mast by means of a flange

180

Specifications are subject to change without prior notice

113

180

V-Plane 2 bays

4 bays


UTV-14

UHF (DVB-H) OMNI ANTENNA PATENT PENDING (MI2006A 000499)

FEATURES

See table

vertical polarization broadband 7 dB gain omnidirectional pattern

UHF ANTENNAS

ELECTRICAL DATA UTV-14/C UTV-14/D UTV-14/B ANTENNA TYPE UTV-14/A UTV-14/CD 550 ÷ 638 638 ÷ 742 742 ÷ 862 (a) 678 ÷ 790 FREQUENCY RANGE (MHz) 470 ÷ 550 OPERATING CHANNELS (CCIR) ch. 21 ÷ 30 ch. 31 ÷ 410° - ch. 42 ÷ 54 ch. 55 ÷ 69 (a) ch. 47 ÷ 60 2° - 8.5° 0° - 2° - 8.5° 0° - 2° - 5° ELECTRICAL DOWNTILT 0° - 2° - 8.5° 0° IMPEDANCE 50 ohm CONNECTOR 7/16 F MAX POWER 500 W VSWR ≤ 1.4 POLARIZATION Vertical GAIN (referred to half wave dipole) 7 dB (*) 6.5 dB HALF POWER BEAM WIDTH E-Plane ± 5° E-Plane ± 5.3° LIGHTNING PROTECTION The metal parts of the antenna,including the inner conductor, are DC grounded. From the solid metal tip right down to the base,the grounding cross-section is 90 mm2 aluminium or more.

ICING PROTECTION RADOME COLOUR MOUNTING

0

270

90 10 6 3 1 dB 180

H-Plane 0

90

270

(*) only all version with electrical downtilt 8.5° Gain=6.5 dB (a) version 2° electrical downtilt freq=726÷862 MHz ch.53÷69 (a) version 5° electrical downtilt freq=702÷862 MHz ch.50÷69

MECHANICAL DATA DIMENSIONS 3410 x ø82 WEIGHT 19 kg WIND SURFACE 0.28 m2 WIND LOAD 300 N (wind speed at 150 km/h) MATERIALS

RADIATION PATTERN (Tipical)

10 6 3 1 dB 180

2995 x ø82 18 kg 0.25 m2 260 N

2575 x ø82 17 kg 0.21 m2 225 N

2260 x ø82 16 kg 0.19 m2 198 N

Internal parts (Brass,Aluminium,Teflon) Radome (Fiberglass) Full radome Grey On pole ø 60 ÷ 120 mm Specifications are subject to change without prior notice

114

E-Plane (0° tilt)

2260 x ø82 16 kg 0.19 m2 198 N

0

270

90 10 6 3 1 dB 180

E-Plane (8° tilt)


UTV-15

UHF (DVB-H) OMNI ANTENNA PATENT PENDING (MI2006A 000499)

FEATURES

RADIATION PATTERN (Tipical)

UTV-15/C UTV-15/D UTV-15/CD 638 ÷ 742 742 ÷ 862 (a) 678 ÷ 790 ch. 42 ÷ 54 ch. 55 ÷ 69 (a) ch. 47 ÷ 60 0° - 2° 0° - 2° 0° 50 ohm 7/16 F 500 W ≤ 1.4 Vertical 8 dB 7.5 dB E-Plane ± 3.5° E-Plane ± 3.8° The metal parts of the antenna,including the inner conductor, are DC grounded. From the solid metal tip right down to the base,the grounding cross-section is 90 mm2 aluminium or more.

UTV-15/A 470 ÷ 550 ch. 21 ÷ 30 0° - 2°

UTV-15/B 550 ÷ 638 ch. 31 ÷ 41 0° - 2°

0

270

6 3 1 dB 180

H-Plane 0

ICING PROTECTION RADOME COLOUR MOUNTING

90

270 10

(a) version 2° electrical downtilt freq=726÷862 MHz ch.53÷69

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (wind speed at 150 km/h) MATERIALS

90

6 3 1 dB 180

4492 x ø82 23 kg 0.37 m2 392 N

3927 x ø82 21 kg 0.32 m2 343 N

3377 x ø82 19 kg 0.28 m2 295 N

2942 x ø82 17 kg 0.24 m2 260 N

Internal parts (Brass,Aluminium,Teflon) Radome (Fiberglass) Full radome Grey On pole ø 60 ÷ 120 mm Specifications are subject to change without prior notice

115

E-Plane (0° tilt)

2942 x ø82 17 kg 0.24 m2 260 N

0

90

270 10 6 3 180

E-Plane (2° tilt)

UHF ANTENNAS

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE (MHz) OPERATING CHANNELS (CCIR) ELECTRICAL DOWNTILT IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAM WIDTH LIGHTNING PROTECTION

See table

vertical polarization broadband 8 dB gain omnidirectional pattern


BPFM-03

119

BPFM-05/5F

120

BPFM-05/6F

121

FM-03 P

122

FM-05H P

123

FM-05V P

124

FM-01S

125

FMC-06 SP

126

FMC-06 SP1

127

3VTV-02 EB

128

3VTV-04 EB

129

UTV-11/P

130

117

SPECIAL ANTENNAS

Special Antennas


UHF ANTENNAS


BPFM-03

VHF (B.I) - FM PANEL ANTENNA

FEATURES horizontal polarization broadband 76 ÷ 108 MHz 7.5 dB gain directional pattern suitable as a component in various arrays on square towers stainless steel dipoles

RADIATION PATTERNS (Mid Band) 0

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

BPFM-03 76 ÷ 108 MHz 50 ohm 7/8” EIA 5 kW ≤1.15 Horizontal 7.5 dB E-Plane ± 34° H-Plane ± 28° All Metal Parts DC Grounded

90

270 10

10

6

6

3 1 dB

3 1 dB

180

H-Plane

2650 x 1800 x 1110 mm 100 kg 1.32 m2 3.24 kN 220 km/h Reflector (hot dip galvanized steel) Dipole (stainless steel) Internal parts (silver plated brass, polished brass,deoxidized aluminium) Radome (fiberglass) Feed point radome Orange (standard) Directly on supporting mast

180

E-Plane

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

119

90

270

FREQ. (MHz)

SPECIAL ANTENNAS

0


BPFM-05/5F

VHF (B.I) - FM PANEL ANTENNA

FEATURES horizontal polarization broadband 76 ÷ 101 MHz 6.5 dB gain directional pattern suitable as a component in various arrays on triangular towers stainless steel dipoles

RADIATION PATTERNS (Mid Band)

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR SPECIAL ANTENNAS

POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

0

0

BPFM-05/5F 76 ÷ 101 MHz 50 ohm 7/8” EIA 5 kW ≤1.15 (76÷82 MHz) ≤1.20 (82÷101 MHz) Horizontal 6.5 dB E-Plane ± 40° H-Plane ± 28° All Metal Parts DC Grounded

270

90

270

90

10

10

6

6

3 1 dB

3 1 dB

180

H-Plane

180

E-Plane

VSWR

2650 x 1800 x 1110 mm 118 kg 1.36 m2 2.05 kN 220 km/h Reflector (hot dip galvanized steel) Dipole (stainless steel) Internal parts (silver plated brass, polished brass,deoxidized aluminium) Radome (fiberglass) Feed point radome Orange (standard) Directly on supporting mast

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

120

FREQ. (MHz)


BPFM-05/6F

VHF (B.I) - FM PANEL ANTENNA

FEATURES horizontal polarization broadband 82 ÷ 103 MHz 6.5 dB gain directional pattern suitable as a component in various arrays on triangular towers stainless steel dipoles

RADIATION PATTERNS (Mid Band)

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

BPFM-05/6F 82 ÷ 103 MHz 50 ohm 7/8” EIA 5 kW ≤1.15 Horizontal 6.5 dB E-Plane ± 40° H-Plane ± 28° All Metal Parts DC Grounded

0

90

270

90

270

10

10

6

6

3 1 dB

3 1 dB

180

180

H-Plane

E-Plane

VSWR

2650 x 1800 x 1110 mm 117 kg 1.36 m2 2.05 kN 220 km/h Reflector (hot dip galvanized steel) Dipole (stainless steel) Internal parts (silver plated brass, polished brass,deoxidized aluminium) Radome (fiberglass) Feed point radome Orange (standard) Directly on supporting mast

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

121

FREQ. (MHz)

SPECIAL ANTENNAS

0


FM-03/P

FM PANEL ANTENNA

FEATURES horizontal or vertical polarization broadband 87.5 ÷ 108 MHz 7.5 dB gain directional pattern suitable as a component in various arrays on square towers stainless steel dipoles

RADIATION PATTERNS (Mid Band) 0

0

SPECIAL ANTENNAS

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

FM-03/P 87.5 ÷ 108 MHz 50 ohm 1-5/8” EIA 10 kW ≤ 1.15 Horizontal or Vertical 7.5 dB E-Plane ± 34° H-Plane ± 30° All Metal Parts DC Grounded

270

90

270

90

10

10

6

6

3 1 dB

3 1 dB

180

H-Plane

180

E-Plane

VSWR

2200 x 2000 x 1080 mm 62 kg 0.77 m2 1.1 kN 270 km/h Reflector (hot dip galvanized steel) Dipoles (stainless steel) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) Directly on supporting mast

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

122

FREQ. (MHz)


FM-05H/P

FM PANEL ANTENNA

FEATURES horizontal polarization broadband 87.5 ÷ 108 MHz 6.5 dB gain directional pattern suitable as a component in various arrays on triangular towers stainless steel dipoles

RADIATION PATTERNS (Mid Band) 0

LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

FM-05H/P 87.5 ÷ 108 MHz 50 ohm 1-5/8” EIA 10 kW ≤ 1.15 Horizontal 6.5 dB E-Plane ± 38° H-Plane ± 28° All Metal Parts DC Grounded

270

90

270

90

10

10

6

6

3 1 dB

3 1 dB

180

H-Plane

180

E-Plane

VSWR

2500 x 1700 x 1202 mm 63 kg 0.72 m2 1.05 kN 270 km/h Reflector (hot dip galvanized steel) Dipoles (stainless steel) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) Directly on supporting mast

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

123

FREQ. (MHz)

SPECIAL ANTENNAS

0

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH


FM-05V/P

FM PANEL ANTENNA

FEATURES vertical polarization broadband 87.5 ÷ 108 MHz 6 dB gain directional pattern suitable as a component in various arrays on triangular towers stainless steel dipoles

RADIATION PATTERNS (Mid Band) 0

0

SPECIAL ANTENNAS

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD (at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

FM-05V/P 87.5 ÷ 108 MHz 50 ohm 1-5/8” EIA 10 kW ≤ 1.15 Vertical 6 dB E-Plane ± 34° H-Plane ± 36° All Metal Parts DC Grounded

270

90

90

270

10

10

6

6

3 1 dB

3 1 dB

180

180

H-Plane

E-Plane

VSWR

2200 x 2000 x 1202 mm 64 kg 0.79 m2 1.14 kN 270 km/h Reflector (hot dip galvanized steel) Dipoles (stainless steel) Internal parts (silver plated brass, polished brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) Directly on supporting mast

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

124

FREQ. (MHz)


FM-01S

FM PANEL ANTENNA

FEATURES

mm 2 66 22 lude c s) (in pole di

2400 mm

vertical polarization broadband 87.5 ÷ 108 MHz 1.8 dB gain (one bay) omnidirectional pattern (one bay) stainless steel dipoles

1645 mm RADIATION PATTERNS (Mid Band) (one bay)

0

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

MOUNTING

FM-01S 87.5 ÷ 108 MHz 50 ohm 1-5/8” EIA 10 kW ≤1.3 Vertical 1.8 dB (one bay) E-Plane ± 35° H-Plane Omnidirectional(one bay) All Metal Parts DC Grounded

See photo (one bay) 110 kg (reflector and 2 dipoles) 1.02 m2 (reflector and 2 dipoles) 1.41 kN (reflector and 2 dipoles) 220 km/h Reflector (hot dip galvanized steel) Dipole (stainless steel) Internal parts (silver plated brass, polished brass,deoxidized aluminium) Special integrated reflector with Ø 324 pipe

270

90

90

10

10

6

6

3 1 dB

3 1 dB

180

180

H-Plane

E-Plane

VSWR

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

125

270

(one bay)

FREQ. (MHz)

SPECIAL ANTENNAS

0


FMC-06/SP

FM TOP OR SIDEMONT DIPOLE

FEATURES circular / elliptical polarization broadband 95.2 ÷ 108 MHz

RADIATION PATTERNS (Mid Band) 0

SPECIAL ANTENNAS

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

FMC-06/SP 95.2 ÷ 108 MHz 50 ohm 7/8” EIA 7.5 kW ≤1.12 Circular / Elliptical -1.5 dB Omnidirectional ± 1.5 dB in free space Omnidirectional ± 2 dB with ø 100 pole All metal parts DC grounded

270

90

90

270

10

10

6

6

3 1 dB

3 1 dB

180

180

Horizontal Component

Vertical Component

VSWR

1550 x 830 x 830 mm 20.5 kg 0.40 m2 0.75 kN (wind speed 150 km/h) 220 km/h External parts (stailess steel, nickel plated brass) Internal parts (polished brass, silver plated brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) With special pipe clamps ø 75 ÷ 150 mm Specifications are subject to change without prior notice

126

0

FREQ. (MHz)


FMC-06/SP1

FM TOP OR SIDEMONT DIPOLE

FEATURES circular / elliptical polarization broadband 87.5 ÷ 99 MHz

RADIATION PATTERNS (Mid Band) 0

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

FMC-06/SP1 87.5 ÷ 99 MHz 50 ohm 7/8” EIA 7.5 kW ≤1.12 Circular / Elliptical -1.5 dB Omnidirectional ± 1.5 dB in free space Omnidirectional ± 2 dB with ø 100 pole All metal parts DC grounded

270

90 10

10

6

6

3 1 dB

3 1 dB

180

180

Horizontal Component

Vertical Component

VSWR

1550 x 920 x 920 mm 21 kg 0.40 m2 0.75 kN (wind speed 150 km/h) 220 km/h External parts (stailess steel, nickel plated brass) Internal parts (polished brass, silver plated brass, deoxidized aluminium) Radome (fiberglass) Feed point radome Grey (standard) With special pipe clamps ø 75 ÷ 150 mm Specifications are subject to change without prior notice

127

90

270

FREQ. (MHz)

SPECIAL ANTENNAS

0


3VTV-02/EB

VHF PANEL ANTENNA

FEATURES horizontal polarization broadband 174 ÷ 254 MHz 8 dB gain directional pattern suitable as a component in various arrays

RADIATION PATTERNS (Mid Band) 0

SPECIAL ANTENNAS

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION

MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

MOUNTING

90

270

3VTV-02/EB 174 ÷ 254 MHz 50 ohm 7/8” EIA 3 kW ≤ 1.15 Horizontal 8 dB E-Plane ± 31° H-Plane ± 28° All metal parts DC grounded

0

90

270

10

10

6

6

3 1 dB

3 1 dB

180

180

H-Plane

E-Plane

VSWR

1300 x 1300 x 532 mm 36 kg 0.75 m2 1.10 kN (wind speed 150 km/h) 220 km/h Reflector (hot dip galvanized steel) Dipoles (stainless steel) Internal parts (silver plated brass) Directly on supporting mast or tower

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

128

FREQ. (MHz)


3VTV-04/EB

VHF PANEL ANTENNA

FEATURES horizontal polarization broadband 174 ÷ 254 MHz 11 dB gain directional pattern suitable as a component in various arrays

RADIATION PATTERNS (Mid Band)

90

270

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) HALF POWER BEAMWIDTH LIGHTNING PROTECTION MECHANICAL DATA DIMENSIONS WEIGHT WIND SURFACE WIND LOAD MAX WIND VELOCITY MATERIALS

MOUNTING

3VTV-04/EB 174 ÷ 254 MHz 50 ohm 7/8” EIA 3 kW ≤ 1.15 Horizontal 11 dB E-Plane ± 31° H-Plane ± 13° All metal parts DC grounded

0

90

270

10

10

6

6

3 1 dB

3 1 dB

180

180

H-Plane

E-Plane

VSWR

2800 x 1300 x 499 mm 84 kg 1.75 m2 2.73 kN (wind speed 150 km/h) 220 km/h Reflector (hot dip galvanized steel) Dipoles (stainless steel) Internal parts (silver plated brass) Directly on supporting mast or tower

FREQ. (MHz) GAIN (dB)

Specifications are subject to change without prior notice

129

FREQ. (MHz)

SPECIAL ANTENNAS

0


UTV-11/P

UHF SUPERTURNSTILE ANTENNA

FEATURES horizontal polarization broadband 470 ÷ 860 MHz omnidirectional pattern self supporting radome

SPECIAL ANTENNAS

ELECTRICAL DATA ANTENNA TYPE FREQUENCY RANGE IMPEDANCE CONNECTOR MAX POWER VSWR POLARIZATION GAIN (referred to half wave dipole) LIGHTNING PROTECTION

MECHANICAL DATA DIAMETER ANTENNA HEIGHT “L” WEIGHT WIND SURFACE WIND LOAD (wind speed at 150 km/h) MAX WIND VELOCITY MATERIALS

ICING PROTECTION RADOME COLOUR MOUNTING

ø 330

UTV-11/2/P UTV-11/4/P 470 ÷ 860 MHz 50 ohm 1-5/8” EIA 3-1/8” EIA 5 kW 10 kW ≤ 1.1 Horizontal 8 dB 11 dB All metal parts DC grounded

420 mm 2902 mm 85 kg 0.96 m2 0.76 kN

650 mm 5346 mm 230 kg 1.85 m2 1.58 kN

220 km/h Dipoles (galvanized steel) Internal parts (silver plated brass) Radome (fiberglass) Supporting frame (galvanized steel) Full radome Grey Directly on top of existing mast by means of a flange

base referred to UTV-11/2/P

base referred to UTV-11/4/P

HORIZONTAL RADIATION PATTERNS (Mid Band) 0

270

Specifications are subject to change without prior notice

130

90 10 6 3 1 dB 180


Switching Units and Manual Switches

133

FM Switching Units

137

VHF B3 Switching Units

139

UHF Switching Units

141

SWITCHING UNIT & MANUAL SWITCHERS

Manual Switches

Specifications are subject to change without prior notice

131


MANUAL SWITCHES

FEATURES flanged / unflanged type low insertion loss low V.S.W.R indoor applications easy and quick lock and unlock system

GENERAL FEATURES FREQUENCY RANGE IMPEDENCE RETURN LOSS (in the operating channel) MAX MEAN POWER CONNECTORS WEIGHT OPERATING TEMPERATURE RANGE MATERIALS - Support frame - Supporting plate - External body - Inner conductor - Insulating material EXTERNAL FINISHING

0.1 ÷ 860 MHz 50 ohm ≥ 32 dB See table below See table See table -40 ÷ +70° C Available on request Aluminium Polished copper, polished brass Silver plated brass Teflon Painted Ral 7001, Nickel plating

MAX MEAN POWER (kW) 300 200

6-1/8” RL 120 4-1/2”

50

20

3-1/8”

10

1-5/8”

5

7/8” 7/16

1 0.5

0.2

N 40

50

VHF-BI

100

FM

200

VHF-BIII

500

UHF

1000

(MHz)

Specifications are subject to change without prior notice

133

SWITCHING UNIT & MANUAL SWITCHERS

100

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 120°C


MANUAL SWITCHES

3 PORTS / 1 U-LINK MANUAL SWITCHES U-LINKS TYPE TYPE Nr. CMT-01 CMT-01/U CMT-11 CMT-11/U CMT-21/3 CMT-21/3/U CMT-21/4 CMT-21/4/U CMT-21/6 CMT-21/6/U CMT-31/X * CMT-31/X/U *

1-5/8” 1-5/8” 3-1/8” 3-1/8” 5” 5” 5” 5” 5” 5” 6-1/8” 6-1/8”

1 1 1 1 1 1 1 1 1 1 1 1

DIMENSIONS

PORTS

WEIGHT

TYPE

Nr.

H (mm)

W (mm)

D (mm)

C (mm)

(kg)

1-5/8” EIA 1-5/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 4-1/2” EIA 4-1/2” UNFL F 6-1/8” EIA 6-1/8” UNFL F 6-1/8” EIA 6-1/8” UNFL F

3 3 3 3 3 3 3 3 3 3 3 3

266.5 266.5 399 399 489 489 489 489 489 489 580 580

482.6 482.6 482.6 482.6 482.6 482.6 482.6 482.6 482.6 482.6 715 715

255 255 255 255 360 334 340 334 340 334 393 387

150 150 200 200 250 250 250 250 250 250 300 300

12 10.5 21 18.5 28 26 32 28.5 38 34 44 40

* UHF 470 ÷ 780 MHz , VHF up to 230 MHz Note: F = female

3 PORTS / 1 U-LINK MANUAL SWITCHES

4 PORTS / 2 U-LINK MANUAL SWITCHES U-LINKS TYPE TYPE Nr.

SWITCHING UNIT & MANUAL SWITCHERS

CMT-02 CMT-02/U CMT-12 CMT-12/U CMT-22/3 CMT-22/3/U CMT-22/4 CMT-22/4/U CMT-22/6 CMT-22/6/U CMT-32/X * CMT-32/X/U *

1-5/8” 1-5/8” 3-1/8” 3-1/8” 5” 5” 5” 5” 5” 5” 6-1/8” 6-1/8”

2 2 2 2 2 2 2 2 2 2 2 2

DIMENSIONS

PORTS

WEIGHT

TYPE

Nr.

H (mm)

W (mm)

D (mm)

C (mm)

(kg)

1-5/8” EIA 1-5/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 4-1/2” EIA 4-1/2” UNFL F 6-1/8” EIA 6-1/8” UNFL F 6-1/8” EIA 6-1/8” UNFL F

4 4 4 4 4 4 4 4 4 4 4 4

310.5 310.5 399 399 532.5 532.5 532.5 532.5 532.5 532.5 600 600

482.6 482.6 482.6 482.6 482.6 482.6 482.6 482.6 482.6 482.6 715 715

255 255 255 255 360 334 340 334 340 334 393 387

150 150 200 200 250 250 250 250 250 250 300 300

16 14 28.5 25 51 47.5 55 50 63 57 75 69

* UHF 470 ÷ 780 MHz , VHF up to 230 MHz Note: F = female

4 PORTS / 2 U-LINKS MANUAL SWITCHES

Specifications are subject to change without prior notice

134


MANUAL SWITCHES

5 PORTS / 2 U-LINK MANUAL SWITCHES U-LINKS TYPE TYPE Nr. CMT-03 CMT-03/U CMT-13 CMT-13/U CMT-23/3 CMT-23/3/U CMT-23/4 CMT-23/4/U CMT-23/6 CMT-23/6/U CMT-33/X * CMT-33/X/U *

1-5/8” 1-5/8” 3-1/8” 3-1/8” 5” 5” 5” 5” 5” 5” 6-1/8” 6-1/8”

2 2 2 2 2 2 2 2 2 2 2 2

DIMENSIONS

PORTS

WEIGHT

TYPE

Nr.

H (mm)

W (mm)

D (mm)

C (mm)

(kg)

1-5/8” EIA 1-5/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 4-1/2” EIA 4-1/2” UNFL F 6-1/8” EIA 6-1/8” UNFL F 6-1/8” EIA 6-1/8” UNFL F

5 5 5 5 5 5 5 5 5 5 5 5

310.5 310.5 440 440 560 560 560 560 560 560 580 580

482.6 482.6 560 560 760 760 760 760 760 760 915 915

255 255 255 255 360 334 340 334 340 334 393 387

150 150 200 200 250 250 250 250 250 250 300 300

17.5 15 35 30.5 58 53.5 66 60.5 72 65 87 80

* UHF 470 ÷ 780 MHz , VHF up to 230 MHz Note: F = female

5 PORTS / 2 U-LINKS MANUAL SWITCHES

CMT-04 CMT-04/U CMT-14 CMT-14/U CMT-24/3 CMT-24/3/U CMT-24/4 CMT-24/4/U CMT-24/6 CMT-24/6/U CMT-34/X * CMT-34/X/U *

1-5/8” 1-5/8” 3-1/8” 3-1/8” 5” 5” 5” 5” 5” 5” 6-1/8” 6-1/8”

3 3 3 3 3 3 3 3 3 3 3 3

WEIGHT

DIMENSIONS

PORTS TYPE

Nr.

H (mm)

W (mm)

D (mm)

C (mm)

(kg)

1-5/8” EIA 1-5/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 4-1/2” EIA 4-1/2” UNFL F 6-1/8” EIA 6-1/8” UNFL F 6-1/8” EIA 6-1/8” UNFL F

6 6 6 6 6 6 6 6 6 6 6 6

310.5 310.5 480 480 660 660 660 660 660 660 800 800

482.6 482.6 560 560 860 860 860 860 860 860 815 815

255 255 255 255 360 334 340 334 360 334 393 387

150 150 200 200 250 250 250 250 250 250 300 300

22 19 38 33 69 64 75 69 82 75 102 95

* UHF 470 ÷ 780 MHz , VHF up to 230 MHz Note: F = female

6 PORTS / 3 U-LINKS MANUAL SWITCHES

Specifications are subject to change without prior notice

135

SWITCHING UNIT & MANUAL SWITCHERS

6 PORTS / 3 U-LINK MANUAL SWITCHES U-LINKS TYPE TYPE Nr.


MANUAL SWITCHES

7 PORTS / 3 U-LINKS MANUAL SWITCHES TYPE

CMT-05 CMT-05/U CMT-15 CMT-15/U CMT-25/3 CMT-25/3/U CMT-25/4 CMT-25/4/U CMT-25/6 CMT-25/6/U

U-LINKS

PORTS

DIMENSIONS

WEIGHT

TYPE

Nr.

TYPE

Nr.

H (mm)

W (mm)

D (mm)

C (mm)

(kg)

1-5/8” 1-5/8” 3-1/8” 3-1/8” 5” 5” 5” 5” 5” 5”

3 3 3 3 3 3 3 3 3 3

1-5/8” EIA 1-5/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 4-1/2” EIA 4-1/2” UNFL F 6-1/8” EIA 6-1/8” UNFL F

7 7 7 7 7 7 7 7 7 7

445 445 660 660 840 840 840 840 840 840

482.6 482.6 560 560 860 860 860 860 860 860

255 255 255 255 360 334 360 334 360 334

150 150 200 200 250 250 250 250 250 250

25.5 22 47 41 80 77 85 76.5 89 75

Note: F = female

7 PORTS / 3 U-LINKS MANUAL SWITCHES

9 PORTS / 4 U-LINKS MANUAL SWITCHES TYPE

SWITCHING UNIT & MANUAL SWITCHERS

CMT-06 CMT-06/U CMT-16 CMT-16/U

U-LINKS

PORTS

DIMENSIONS

WEIGHT

TYPE

Nr.

TYPE

Nr.

H (mm)

W (mm)

D (mm)

C (mm)

(kg)

1-5/8” 1-5/8” 3-1/8” 3-1/8”

4 4 4 4

1-5/8” EIA 1-5/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F

9 9 9 9

580 580 700 700

660 660 860 860

255 255 255 255

150 150 200 200

35 31 65 57

Note: F = female

9 PORTS / 4 U-LINKS MANUAL SWITCHES

Specifications are subject to change without prior notice

136


FM SWITCHING UNITS

FEATURES flanged / unflanged type low insertion loss low V.S.W.R indoor applications easy and quick lock and unlock system GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS (in the operating channel) MAX MEAN POWER CONNECTORS WEIGHT OPERATING TEMPERATURE RANGE MATERIALS - Support frame - Supporting plate - External body - Inner conductor - Insulating material EXTERNAL FINISHING

87.5 ÷ 108 MHz 50 ohm ≥ 32 dB See table below See table See table -40 ÷ +70° C Galvanized steel Aluminium Polished copper, polished brass Silver plated brass Teflon Painted Ral 7001, Nickel plating

MAX MEAN POWER (kW) 300 200

6-1/8” RL 120 4-1/2”

50

20

3-1/8”

10

1-5/8”

5

7/8” 7/16

1 0.5

0.2

N 40

50

VHF-BI

100

FM

200

VHF-BIII

500

UHF

1000

(MHz)

Note: Power handling is limited by the smallest size either by U-Links or inputs / outputs ports. Specifications are subject to change without prior notice

137

SWITCHING UNIT & MANUAL SWITCHERS

100

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 120°C


FM SWITCHING UNITS

figure “1”

TYPE

SWITCHING UNIT & MANUAL SWITCHERS

SWU/FM-04 SWU/FM-04/U SWU/FM-05 SWU/FM-05/U SWU/FM-14 SWU/FM-14/U SWU/FM-15 SWU/FM-15/U SWU/FM-24/4/U SWU/FM-24/6/U SWU/FM-25/4/U SWU/FM-25/6/U SWU/FM-34 SWU/FM-34/U

figure “2”

U-LINKS

PORTS

FIGURE

TYPE

Nr.

TYPE

Nr.

1-5/8” 1-5/8” 1-5/8” 1-5/8” 3-1/8” 3-1/8” 3-1/8” 3-1/8” 5” 5” 5” 5” 6-1/8” 6-1/8”

3 3 3 3 3 3 3 3 3 3 3 3 3 3

1-5/8” EIA 1-5/8” UNFL F 1-5/8” EIA 1-5/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 4-1/2” UNFL F 6-1/8” UNFL F 4-1/2” UNFL F 6-1/8” UNFL F 6-1/8” EIA 6-1/8” UNFL F

6 6 7 7 6 6 7 7 6 6 7 7 6 6

1 1 2 2 1 1 2 2 1 1 2 2 1 1

DIMENSIONS H (mm)

W (mm)

D (mm)

C (mm)

(kg)

2000 2000 2000 2000 2000 2000 2000 2000 1900 1900 2000 2000 2000 2000

600 600 600 600 600 600 600 600 900 900 900 900 900 900

715 715 715 715 750 750 750 750 790 790 790 790 810 810

150 150 150 150 200 200 200 200 250 250 250 250 300 300

63 61.5 68 66 105 102 112 109 162 168 170 178 215 210

Note: F = female Specifications are subject to change without prior notice

138

WEIGHT


VHF-B3 SWITCHING UNITS

FEATURES flanged / unflanged type low insertion loss low V.S.W.R indoor applications easy and quick lock and unlock system GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS (in the operating channel) MAX MEAN POWER CONNECTORS WEIGHT OPERATING TEMPERATURE RANGE MATERIALS - Support frame - Supporting plate - External body - Inner conductor - Insulating material EXTERNAL FINISHING

174 ÷ 230 MHz 50 ohm ≥ 32 dB See table below See table See table -40 ÷ +70° C Galvanized steel Aluminium Polished copper, polished brass Silver plated brass Teflon Painted Ral 7001, Nickel plating

MAX MEAN POWER (kW) 300 200

6-1/8” RL 120 4-1/2”

50

20

3-1/8”

10

1-5/8”

5

7/8” 7/16

1 0.5

0.2

N 40

50

VHF-BI

100

FM

200

VHF-BIII

500

UHF

1000

(MHz)

Note: Power handling is limited by the smallest size either by U-Links or inputs / outputs ports. Specifications are subject to change without prior notice

139

SWITCHING UNIT & MANUAL SWITCHERS

100

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 120°C


VHF-B3 SWITCHING UNITS

figure “1”

TYPE SWITCHING UNIT & MANUAL SWITCHERS

SWU/BT-04 SWU/BT-04/U SWU/BT-05 SWU/BT-05/U SWU/BT-14 SWU/BT-14/U SWU/BT-15 SWU/BT-15/U SWU/BT-24/4/U SWU/BT-24/6/U SWU/BT-25/4/U SWU/BT-25/6/U

figure “2”

U-LINKS

PORTS

FIGURE

TYPE

Nr.

TYPE

Nr.

1-5/8” 1-5/8” 1-5/8” 1-5/8” 3-1/8” 3-1/8” 3-1/8” 3-1/8” 5” 5” 5” 5”

3 3 3 3 3 3 3 3 3 3 3 3

1-5/8” EIA 1-5/8” UNFL F 1-5/8” EIA 1-5/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 4-1/2” UNFL F 6-1/8” UNFL F 4-1/2” UNFL F 6-1/8” UNFL F

6 6 7 7 6 6 7 7 6 6 7 7

1 1 2 2 1 1 2 2 1 1 2 2

DIMENSIONS H (mm)

W (mm)

D (mm)

C (mm)

(kg)

2000 2000 2000 2000 2000 2000 2000 2000 1900 1900 2000 2000

600 600 600 600 600 600 600 600 900 900 900 900

715 715 715 715 750 750 750 750 790 790 790 790

150 150 150 150 200 200 200 200 250 250 250 250

65 63 68 66 98 94 104 101 158 166 163 170

Note: F = female Specifications are subject to change without prior notice

140

WEIGHT


UHF SWITCHING UNITS

FEATURES flanged / unflanged type low insertion loss low V.S.W.R indoor applications easy and quick lock and unlock system GENERAL FEATURES FREQUENCY RANGE * ** IMPEDANCE RETURN LOSS (in the operating channel) MAX MEAN POWER CONNECTORS WEIGHT OPERATING TEMPERATURE RANGE MATERIALS - Support frame - Supporting plate - External body - Inner conductor - Insulating material EXTERNAL FINISHING

470 ÷ 860 MHz 50 ohm ≥ 32 dB See table below See table See table -40 ÷ +70° C Galvanized steel Aluminium Polished copper, polished brass Silver plated brass Teflon Painted Ral 7001, Nickel plating

MAX MEAN POWER (kW) 300 200

6-1/8” RL 120 4-1/2”

50

20

3-1/8”

10

1-5/8”

5

7/8” 7/16

1 0.5

0.2

N 40

50

VHF-BI

100

FM

200

VHF-BIII

500

UHF

1000

(MHz)

Note: Power handling is limited by the smallest size either by U-Links or inputs / outputs ports. Specifications are subject to change without prior notice

141

SWITCHING UNIT & MANUAL SWITCHERS

100

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 120°C


UHF SWITCHING UNITS

figure “1”

figure “2”

TYPE

U-LINKS

SWITCHING UNIT & MANUAL SWITCHERS

SWU/TV-04 SWU/TV-04/U SWU/TV-05 SWU/TV-05/U SWU/TV-14 SWU/TV-14/U SWU/TV-15 SWU/TV-15/U SWU/TV-24/4/U SWU/TV-24/6/U* SWU/TV-25/4/U SWU/TV-25/6/U* SWU/TV-24/6/WB SWU/TV-24/6/WB/U SWU/TV-34** SWU/TV-34/U** Note: F = female

PORTS

DIMENSIONS

FIGURE

TYPE

Nr.

TYPE

Nr.

1-5/8” 1-5/8” 1-5/8” 1-5/8” 3-1/8” 3-1/8” 3-1/8” 3-1/8” 5” 5” 5” 5” 5” 5” 6-1/8” 6-1/8”

3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3

1-5/8” EIA 1-5/8” UNFL F 1-5/8” EIA 1-5/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 3-1/8” EIA 3-1/8” UNFL F 4-1/2” UNFL F 6-1/8” UNFL F 4-1/2” UNFL F 6-1/8” UNFL F 6-1/8” EIA 6-1/8” UNFL F 6-1/8” EIA 6-1/8” UNFL F

6 6 7 7 6 6 7 7 6 6 7 7 6 6 6 6

*: up to 790 MHz

figure “3”

1 1 2 2 1 1 2 2 1 1 2 2 3 3 1 1

H (mm)

W (mm)

D (mm)

C (mm)

(kg)

2000 2000 2000 2000 2000 2000 2000 2000 1900 1900 2000 2000 2000 2000 2000 2000

600 600 600 600 600 600 600 600 900 900 900 900 900 900 900 900

715 715 715 715 750 750 750 750 790 790 790 790 1160 1160 810 810

150 150 150 150 200 200 200 200 250 250 250 250 250 250 300 300

60 58.5 63 61.5 90 87 93 90 152 160 160 168 185 180 205 200

**: up to 780 MHz Specifications are subject to change without prior notice

142

WEIGHT


FM Coaxial Splitters

145

VHF B3 Coaxial Splitters

148

UHF Coaxial Splitters

150

Rigid Lines

153

Fine Matchers

155

Directional Couplers

158

Frequency Equalized Directional Coupler

160

Coaxial Elbows

164

Coaxial Adaptors

166

Coaxial Accessories

169

Cable Test Sections

171

Connectors for Coaxial Cables

173

Specifications are subject to change without prior notice

143

COAXIAL COMPONENTS

Coaxial Components


FM COAXIAL SPLITTERS

FEATURES broadband power dividers low insertion loss low V.S.W.R available unbalanced power dividers

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS POWER RATING * OPERATING TEMPERATURE RANGE CONNECTORS NUMBER OF WAYS WEIGHT PRESSURIZATION MATERIALS - External body - Inner conductor - Insulator EXTERNAL FINISHING

87.5 ÷ 108 MHz 50 ohm ≥ 32 dB See table -40 ÷ +70° C See table See table See table Typical operating pressure 300hPa (300mBar) Polished copper, polished brass Silver plated brass, polished brass, deoxided aluminium Teflon Painted Ral 7001, Nickel plating

* ambient temperature 40° C

TYPE

RFM-02/ST RFM-03/ST RFM-04/ST RFM-12/ST RFM-13/ST RFM-14/ST RFM-202/ST RFM-204/ST RFM-44/ST RFM-232/ST

INPUT CONNECTOR 7/8” EIA 7/8” EIA 7/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 4-1/2” EIA 4-1/2” EIA 6-1/8” EIA 6-1/8” EIA

OUTPUT CONNECTORS Nr. Type 7/8” EIA 2 7/8” EIA 3 7/8” EIA 4 7/8” EIA 2 7/8” EIA 3 7/8” EIA 4 3-1/8” EIA 2 3-1/8” EIA 4 3-1/8” EIA 4 4-1/2” EIA 2

DIMENSIONS A (mm) 2627 2627 2627 2606 2606 2606 1700 2548 2706 1936

B (mm) 147.5 206 206 147.5 206 206 330 430 508 300

C (Ømm) 41.9 41.9 41.9 41.9 41.9 41.9 106 106 155.6 155.6

POWER RATING (kW)

WEIGHT

FIGURE

98 MHz 7.7 7.7 7.7 15.4 17.9 17.9 80 80 163 160

(kg) 11.5 12.5 13 10.5 11.5 12 23 37 60 40

1 1 1 1 1 1 2 1 1 2

87.5 MHz 8.2 8.2 8.2 16.4 18.8 18.8 84 84 173 168

Specifications are subject to change without prior notice

145

108 MHz 7.3 7.3 7.3 14.6 17 17 75 75 155 150

COAXIAL COMPONENTS

STANDARD TYPES WITH TUNABLE STUB


FM COAXIAL SPLITTERS

STANDARD TYPES

COAXIAL COMPONENTS

TYPE

INPUT CONNECTOR

RFM-72 RFM-73 RFM-74 RFM-76 RFM-112 RFM-113 RFM-114 RFM-52 RFM-53 RFM-54 RFM-56 RFM-02 RFM-03 RFM-04 RFM-05 RFM-06 RFM-08 RFM-64 RFM-66 RFM-12 RFM-13 RFM-14 RFM-15 RFM-16 RFM-18 RFM-143 RFM-144 RFM-145 RFM-146 RFM-148 RFM-22 RFM-23 RFM-24 RFM-25 RFM-294 RFM-295 RFM-203 RFM-204

7/16 7/16 7/16 7/16 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 4-1/2” EIA 4-1/2” EIA 4-1/2” EIA 4-1/2” EIA

OUTPUT CONNECTORS Nr. Type 7/16 2 7/16 3 7/16 4 7/16 6 NF 2 NF 3 NF 4 7/16 2 7/16 3 7/16 4 7/16 6 7/8” EIA 2 7/8” EIA 3 7/8” EIA 4 7/8” EIA 5 7/8” EIA 6 7/8” EIA 8 7/16 4 7/16 6 7/8” EIA 2 7/8” EIA 3 7/8” EIA 4 7/8” EIA 5 7/8” EIA 6 7/8” EIA 8 7/8” EIA 3 7/8” EIA 4 7/8” EIA 5 7/8” EIA 6 7/8” EIA 8 1-5/8” EIA 2 1-5/8” EIA 3 1-5/8” EIA 4 1-5/8” EIA 5 1-5/8” EIA 4 1-5/8” EIA 5 3-1/8” EIA 3 3-1/8” EIA 4

DIMENSIONS A (mm) 1638 1638 1638 1638 1717.5 1717.5 1717.5 1616 1616 1616 1616 1761 1761 1761 1761 1761 1761 1666 1666 1761 1761 1761 1761 1761 1761 1686.5 1686.5 1686.5 1686.5 1686.5 1769.5 1769.5 1769.5 1769.5 1777 1777 1784 1784

B (mm) 103 103 103 104 67 67 67 103 103 103 104 147.5 206 206 206 206 206 103 104 147.5 206 206 206 206 206 188 248 248 248 248 206 309 309 309 349 349 428 428

POWER RATING (kW) C (Ømm) 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 25 41.9 41.9 41.9 41.9 41.9 41.9 41.9 41.9 41.9 79.4 79.4 79.4 79.4 79.4 79.4 79.4 79.4 79.4 106 106 106 106

87.5 MHz 4.6 4.6 4.6 4.6 1.7 2.5 3.4 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 8.2 18.4 18.8 16.4 18.8 18.8 18.8 18.8 18.8 24.6 32.8 41 49.2 56 37.6 56 56 56 75.2 84 84 84

Specifications are subject to change without prior notice

146

98 MHz 4.3 4.3 4.3 4.3 1.6 2.4 3.2 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 7.7 17.2 17.9 15.4 17.9 17.9 17.9 17.9 17.9 23.1 30.8 38.5 46.2 53 35.8 53 53 53 71.6 80 80 80

108 MHz 4.1 4.1 4.1 4.1 1.5 2.3 3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 16.4 17 14.6 17 17 17 17 17 21.9 29.2 36.5 43.8 50 34 50 50 50 68 75 75 75

WEIGHT

FIGURE

(kg) 4.5 4.8 5 5.3 3.5 3.7 4 4.5 4.7 5 5.3 7.5 8 8.5 9 9.5 13 6.5 6.8 8.4 8.9 9.4 10.4 10.9 12.4 14.5 15 16 20 22.8 16 20 21 22 28 28.5 37 43.5

3 3 3 3 4 4 4 5 5 5 5 6 6 6 6 6 6 3 3 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6


FM COAXIAL SPLITTERS

figure “1”

figure “2”

figure “3”

figure “4”

figure “5”

2 ways

3/4 ways

Specifications are subject to change without prior notice

147

5/6 ways

8 ways

COAXIAL COMPONENTS

figure “6”


VHF-B3 COAXIAL SPLITTERS

FEATURES broadband power dividers low insertion loss low V.S.W.R available unbalanced power dividers

GENERAL FEATURES FREQUENCY RANGE IMPEDENCE RETURN LOSS POWER RATING * OPERATING TEMPERATURE RANGE CONNECTORS NUMBER OF WAYS WEIGHT PRESSURIZATION MATERIALS - External body - Inner conductor - Insulator EXTERNAL FINISHING

174 ÷ 230 MHz 50 ohm ≥ 32 dB See table -40 ÷ +70° C See table See table See table Typical operating pressure 300hPa (300mBar) Polished copper, polished brass Silver plated brass, polished brass, deoxided aluminium Teflon Painted Ral 7001, Nickel plating

* mean power , ambient temperature 40° C , atmosphere pressure, dry air

STANDARD TYPES WITH TUNABLE STUB TYPE

COAXIAL COMPONENTS

RBT-22/ST RBT-23/ST RBT-24/ST RBT-202/ST RBT-203/ST RBT-43/ST

INPUT CONNECTOR 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 4-1/2” EIA 4-1/2” EIA 6-1/8” EIA

OUTPUT CONNECTORS Nr. Type 1-5/8” EIA 2 1-5/8” EIA 3 1-5/8” EIA 4 3-1/8” EIA 2 3-1/8” EIA 3 3-1/8” EIA 3

DIMENSIONS A (mm) 1406 1406 1406 1406 1406 1366

B (mm) 218.5 309 309 430 428 483

C (Ømm) 79.4 79.4 79.4 106 106 155.6

POWER RATING (kW)

WEIGHT

FIGURE

202 MHz 24 36 36 80 80 159

(kg) 13 16 18 21 28 40

1 1 1 2 1 1

174 MHz 26 39 39 84 84 168

Specifications are subject to change without prior notice

148

230 MHz 23 33 33 75 75 150


VHF-B3 COAXIAL SPLITTERS

figure “1”

figure “2”

figure “3”

TYPE

INPUT CONNECTOR

RBT-72 RBT-02 RBT-03 RBT-04 RBT-05 RBT-06 RBT-08 RBT-12 RBT-13 RBT-14 RBT-15 RBT-16 RBT-18 RBT-144 RBT-145 RBT-146 RBT-148 RBT-22 RBT-23 RBT-24 RBT-25 RBT-295 RBT-296

7/16 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 4-1/2” EIA 4-1/2” EIA

OUTPUT CONNECTORS Nr. Type 7/16 2 7/8” EIA 2 7/8” EIA 3 7/8” EIA 4 7/8” EIA 5 7/8” EIA 6 7/8” EIA 8 7/8” EIA 2 7/8” EIA 3 7/8” EIA 4 7/8” EIA 5 7/8” EIA 6 7/8” EIA 8 7/8” EIA 4 7/8” EIA 5 7/8” EIA 6 7/8” EIA 8 1-5/8” EIA 2 1-5/8” EIA 3 1-5/8” EIA 4 1-5/8” EIA 5 1-5/8” EIA 5 1-5/8” EIA 6

DIMENSIONS A (mm) 1209 1261 1261 1261 1282 1282 1261 1261 1261 1261 1261 1261 1261 1185 1185 1185 1185 1276.5 1276.5 1276.5 1276.5 1276.5 1276.5

B (mm) 90.5 147.5 206 206 206 206 206 147.5 206 206 206 206 206 248 248 248 248 206 309 309 279.5 349 314

C (Ømm) 25 25 25 25 41.9 41.9 41.9 41.9 41.9 41.9 41.9 41.9 41.9 79.4 79.4 79.4 79.4 79.4 79.4 79.4 79.4 106 106

POWER RATING (kW)

WEIGHT

FIGURE

202 MHz 3 5.3 5.3 5.3 5.3 5.3 5.3 10.6 12.2 12.2 12.2 12.2 12.2 21.2 26.5 31.8 36 24 36 36 36 55 55

(kg) 3.5 5 5.5 6 8.5 9 12 6 7 7 8 9 10 14 15 16 18 12.5 16 17 19 20 21

1 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3

174 MHz 3.2 5.7 5.7 5.7 5.7 5.7 5.7 11.4 13.2 13.2 13.2 13.2 13.2 22.8 28.5 34.2 39 26 39 39 39 59 59

Specifications are subject to change without prior notice

149

230 MHz 2.8 5 5 5 5 5 5 10 11.6 11.6 11.6 11.6 11.6 20 25 30 33 23 33 33 33 52 52

COAXIAL COMPONENTS

STANDARD TYPES


UHF COAXIAL SPLITTERS

FEATURES broadband power dividers low insertion loss low V.S.W.R available unbalanced power dividers

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS ** POWER RATING *** OPERATING TEMPERATURE RANGE CONNECTORS NUMBER OF WAYS WEIGHT PRESSURIZATION MATERIALS - External body - Inner conductor - Insulator EXTERNAL FINISHING

470 ÷ 860 MHz * 50 ohm ≥ 32 dB See table -40 ÷ +70° C See table See table See table Typical operating pressure 300hPa (300mBar) Polished copper, polished brass Silver plated brass, polished brass, deoxided aluminium Teflon Painted Ral 7001, Nickel plating

* up to 790 MHz for 6-1/8” ** ≥ 26 dB for 7/16 and Nf splitters *** mean power , ambient temperature 40° C , atmosphere pressure, dry air

STANDARD TYPES WITH TUNABLE STUB TYPE

COAXIAL COMPONENTS

RTV-102 RTV-103 RTV-104 RTV-72 RTV-72/E RTV-73 RTV-73/E RTV-74 RTV-74/E RTV-76

INPUT CONNECTOR NF NF NF 7/16 7/16 7/16 7/16 7/16 7/16 7/16

OUTPUT CONNECTORS Nr. Type NF 2 NF 3 NF 4 7/16 2 7/16 2 7/16 3 7/16 3 7/16 4 7/16 4 7/16 6

DIMENSIONS A (mm) 389 389 389 660 508 660 508 660 529 660

B (mm) 67 67 67 92 83 132 83 132 83 155

POWER RATING (kW) C (Ømm) 25 25 25 25 25 25 25 25 25 25

470 MHz 0.35 0.35 0.35 1.9 1.9 1.9 1.9 1.9 1.9 1.9

665 MHz 0.3 0.3 0.3 1.6 1.6 1.6 1.6 1.6 1.6 1.6

Specifications are subject to change without prior notice

150

860 MHz 0.26 0.26 0.26 1.4 1.4 1.4 1.4 1.4 1.4 1.4

WEIGHT

FIGURE

(kg) 1.5 1.1 1.2 2 1 2.5 1.1 3 1.2 3.8

2 2 2 3 3 3 3 3 3 3


UHF COAXIAL SPLITTERS

TYPE

INPUT CONNECTOR

RTV-52 RTV-53 RTV-54 RTV-56 RTV-02 RTV-03 RTV-04 RTV-05 RTV-06 RTV-08 RTV-12 RTV-13 RTV-14 RTV-15 RTV-16 RTV-18 RTV-110 RTV-112 RTV-143 RTV-144 RTV-145 RTV-146 RTV-148 RTV-1410 RTV-22 RTV-23 RTV-24 RTV-25 RTV-26 RTV-82 RTV-288 RTV-2812 RTV-294 RTV-295 RTV-296 RTV-298 RTV-202 RTV-203

7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 4-1/2” EIA 4-1/2” EIA 4-1/2” EIA 4-1/2” EIA 4-1/2” EIA 4-1/2” EIA 4-1/2” EIA 4-1/2” EIA

OUTPUT CONNECTORS Nr. Type 7/16 2 7/16 3 7/16 4 7/16 6 7/8” EIA 2 7/8” EIA 3 7/8” EIA 4 7/8” EIA 5 7/8” EIA 6 7/8” EIA 8 7/8” EIA 2 7/8” EIA 3 7/8” EIA 4 7/8” EIA 5 7/8” EIA 6 7/8” EIA 8 7/8” EIA 10 7/8” EIA 12 7/8” EIA 3 7/8” EIA 4 7/8” EIA 5 7/8” EIA 6 7/8” EIA 8 7/8” EIA 10 1-5/8” EIA 2 1-5/8” EIA 3 1-5/8” EIA 4 1-5/8” EIA 5 1-5/8” EIA 6 3-1/8” EIA 2 7/8” EIA 8 7/8” EIA 12 1-5/8” EIA 4 1-5/8” EIA 5 1-5/8” EIA 6 1-5/8” EIA 8 3-1/8” EIA 2 3-1/8” EIA 3

DIMENSIONS A (mm) 688 688 688 688 711 711 711 711 711 732 711 711 711 711 711 711 721 721 603 603 603 603 713 711 726.5 726.5 726.5 726.5 726.5 721 713 731 747 726.5 726.5 747 754 755

B (mm) 91 138 138 138 147.5 206 206 206 206 206 147.5 206 206 206 206 206 230 248 188 248 248 248 248 230 206 309 309 309 254 295 308 278 349 284 284 349 428 428

C (Ømm) 25 25 25 25 25 25 25 41.8 41.8 41.8 41.8 41.8 41.8 41.8 41.8 41.8 60 60 79.4 79.4 79.4 79.4 79.4 79.4 79.4 79.4 79.4 79.4 79.4 79.4 106 106 106 106 106 106 106 106

POWER RATING (kW)

WEIGHT

FIGURE

665 MHz 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 2.9 5.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 8.7 11.6 14.5 17.4 20 19 13.6 20 20 20 20 20 23 29 27.2 31 31 31 31 31

(kg) 2.2 2.4 2.5 4 4.4 4.8 5.3 5.8 6.3 8.1 5.2 5.6 6 6.5 6 7.5 9.5 12 9 9.4 10 11 14 12 9 11 12.5 14 15 11 18 19 19 20.5 22 24 22 23

4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5

470 MHz 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 3.4 6.8 8 8 8 8 8 8 8 10.2 13.6 17 20.4 24 23 16 24 24 24 24 24 27 35 32 37 37 37 37 37

Specifications are subject to change without prior notice

151

860 MHz 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 5 6 6 6 6 6 6 6 7.5 10 12.5 15 17 16 12 17 17 17 17 17 20 26 24 28 28 28 28 28

COAXIAL COMPONENTS

STANDARD TYPES


UHF COAXIAL SPLITTERS

figure “1”

2 way s

3/4 ways

figure “2”

figure “3”

figure “4”

figure “5”

COAXIAL COMPONENTS

Specifications are subject to change without prior notice

152


RIGID LINES

FEATURES flanged / unflanged rigid lines low insertion losses low V.S.W.R indoor / outdoor applications*

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS MAX MEAN POWER LENGHT WEIGHT OPERATING TEMPERATURE RANGE MATERIALS - Outer conductor

0.1 ÷ 860 MHz 50 ohm ≥ 32 dB See table 0.1 ÷ 4 m (typical 4 m) See table -40 ÷ +70° C Polished Copper / Aluminium (Aluminium for RL 120) Polished Copper Teflon EIA Flanged / EIA Unflanged

- Inner conductor - Insulating material TERMINATED TYPE * only for flanged types

MAX MEAN POWER (kW) 300 200 100

6-1/8” RL 120 4-1/2”

50

20

3-1/8”

10

1-5/8”

5

7/16

1 0.5

0.2

N 40

50

VHF-BI

100

FM

200

VHF-BIII

500

UHF

1000

(MHz)

Specifications are subject to change without prior notice

153

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 120°C

COAXIAL COMPONENTS

7/8”


RIGID LINES

EIA UNFLANGED RIGID LINES TYPE 7/8” 1-5/8” 3-1/8” 4-1/2” RL 120 6-1/8”

DIMENSIONS (mm)

WEIGHT (kg/m)

Outer conductor (A/B)

Inner conductor (C/D)

E

22.3 / 20 41.27 / 38.78 79.4 / 76.88 106 / 103 123 / 120 155.6 / 151.9

8.7 / 7.4 16.87 / 14.93 33.4 / 31.26 44.8 / 42.8 52.1 / 50.1 66 / 64

10.5 11 18 18 0 26

0.33 1.83 3.75 5.6 3 9.76

EIA FLANGED RIGID LINES TYPE 7/8” 1-5/8” 3-1/8” 4-1/2” 6-1/8”

DIMENSIONS (mm) Outer conductor (A/B)

Inner conductor (C/D)

25 / 20 41.27 / 38.78 79.4 / 76.88 106 / 103 155.6 / 151.9

8.7 / 7.4 16.87 / 14.93 33.4 / 31.26 44.8 / 42.8 66 / 64

E 58 89 128 159 206

WEIGHT (kg/m) 2 2.7 5.2 7.9 14.5

COAXIAL COMPONENTS

Specifications are subject to change without prior notice

154


FINE MATCHERS

FEATURES flanged / unflanged fine matchers low insertion losses low V.S.W.R indoor / outdoor applications*

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS MAX MEAN POWER OPERATING TEMPERATURE RANGE CONNECTORS WEIGHT PRESSURIZATION * MATERIALS - External body - Inner conductor - Insulator EXTERNAL FINISHING

See table 50 ohm ≥ 32 dB See table below -40 ÷ +70° C See table below See table below Typical operating pressure 300 hPa (300 mBar) Polished copper, polished brass, Aluminium Silver plated brass Teflon Painted Ral 7001, Passivation SURTEC 650

* only for flanged types

MAX MEAN POWER (kW) 300 200 100

6-1/8” RL 120 4-1/2”

50

20

3-1/8”

10

1-5/8”

5

7/16

1 0.5

0.2

N 40

50

VHF-BI

100

FM

200

VHF-BIII

500

UHF

1000

(MHz)

Specifications are subject to change without prior notice

155

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 120°C

COAXIAL COMPONENTS

7/8”


FINE MATCHERS

figure “1”

TYPE

COAXIAL COMPONENTS

FMBP1-03 FMBP-03 FMBP-04 FMBPFM-03 FMBPFM-07 FMFM-03 FMFM-04 FMFM-06 FMFM-07 FMBT-03 FMBT-04 FMTV-03 FMTV-04 FMTV-06/A FMTV-07

FREQUENCY RANGE (MHz)

CONNECTORS

47 ÷ 57 66 ÷ 88 66 ÷ 88 76 ÷ 108 76 ÷ 108 87.5 ÷ 108 87.5 ÷ 108 87.5 ÷ 108 87.5 ÷ 108 174 ÷ 230 174 ÷ 230 470 ÷ 860 470 ÷ 860 470 ÷ 680 470 ÷ 860

1-5/8” EIA 1-5/8” EIA 3-1/8” EIA 1-5/8” EIA 4-1/2” EIA 1-5/8” EIA 3-1/8” EIA 6-1/8” EIA 4-1/2” EIA 1-5/8” EIA 3-1/8” EIA 1-5/8” EIA 3-1/8” EIA 6-1/8” EIA 4-1/2” EIA

figure “2”

1 1 1 1 1 1 1 1 1 1 1 2 2 2 2

WEIGHT

DIMENSIONS

FIGURE A (mm)

B (mm)

C (mm)

(kg)

1442 980 950 816 816 764 764 764 764 370 370 354 390 580 442

127.5 127.5 208.7 127.5 264.5 127.5 208.7 363 264.5 127.5 208.7 121.2 183.5 363 233.5

89 89 128 89 159 89 128 206 159 89 128 89 128 206 159

6.5 6 7.5 5 10 4 6.5 17.5 9 3.2 4 5 7.4 15 10.5

Specifications are subject to change without prior notice

156


FINE MATCHERS

figure “1”

figure “2”

TYPE

CONNECTORS

FIGURE

TRIM-01 TRIM-02 TRIM-03 TRIM-04 TRIM-05 TRIM-15 TRIM-16 TRIM-08 TRIM-13 TRIM-09

NF - NF 7/16F - 7/16F NM - NF 7/16M - 7/16F 7/8” Unfl - 7/8” Unfl. 1-5/8” Unfl. - 1-5/8” Unfl. 1-5/8” Unfl. - 1-5/8” Unfl. M 3-1/8” Unfl. - 3-1/8” Unfl. 3-1/8” Unfl. - 3-1/8” Unfl. M 4-1/2” Unfl. - 4-1/2” Unfl.

1 1 1 1 2 2 2 2 2 2

DIMENSIONS A (mm)

B (mm)

C (mm)

WEIGHT (kg)

150 162.5 150 162.5 235 348 330 371 377 377

35.5 35.5 35.5 35.5 60 60 60 142 142 199.5

32 32 32 32 58 41.3 41.3 80 80 106

0.7 0.9 0.7 0.9 1 3 3.2 5.4 5.6 8.5

Note: M = male / F = female Specifications are subject to change without prior notice

157

COAXIAL COMPONENTS

UHF 470 - 862 MHz TRIMMER LINES


DIRECTIONAL COUPLERS

FEATURES flanged type low insertion losses low V.S.W.R high directivity value indoor / outdoor applications* GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS COUPLING FACTOR DIRECTIVITY MAX MEAN POWER OPERATING TEMPERATURE RANGE CONNECTORS PROBE CONNECTORS WEIGHT PRESSURIZATION * MATERIALS - External body - Inner conductor - Insulator EXTERNAL FINISHING

0.1 ÷ 860 MHz 50 ohm ≥ 32 dB See table below ≥ 40 dB See table below -40 ÷ +70° C See table below NF See table below Typical operating pressure 300 hPa (300 mBar) Nickel plated brass, polished brass Silver plated brass Teflon Painted Ral 7001

*only for waterproff and protection type

MAX MEAN POWER (kW) 300 200 100

6-1/8” RL 120 4-1/2”

50

20

3-1/8”

10

1-5/8”

5

7/8” COAXIAL COMPONENTS

7/16

1 0.5

0.2

N 40

50

VHF-BI

100

FM

200

VHF-BIII

500

UHF

1000

(MHz)

Specifications are subject to change without prior notice

158

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 120°C


DIRECTIONAL COUPLERS

figure “1”

TYPE

CONNECTORS

Nr PROBES

FIGURE

ADR-01/W ADR-02/P ADR-02/W ADR-03/P ADR-03/W ADR-04/P ADR-04/W ADR-04/3T ADR-06/P ADR-06/W ADR-07/W ADR-07/3T ADR-08/P ADR-08/W

NF 7/8” EIA 7/8” EIA 1-5/8” EIA 1-5/8” EIA 3-1/8” EIA 3-1/8” EIA 3-1/8” EIA 6-1/8” EIA 6-1/8” EIA 7/16 F 7/16 M 4-1/2” EIA 4-1/2” EIA

2 2 2 2 2 2 2 3 2 2 2 3 2 2

1 1 1 1 1 2 2 2 2 2 1 1 2 2

DIMENSIONS

WEIGHT

A (mm)

B (mm)

C (mm)

(kg)

WATER PROOF

177 200 200 198 198 246 246 304 281 281 180 238 246 246

149 172 148 172 149 195 172 272 276 253 149 149 229 206

45 58 58 89 89 128 128 128 206 206 45 45 159 159

2.5 2.8 2.6 2.4 2.2 4.5 4 5 10 9.6 2.5 3.2 6 5.5

YES YES YES YES YES YES YES NO YES YES YES NO YES YES

Note: F = female / M = male Specifications are subject to change without prior notice

159

PROTECTION NO YES NO YES NO YES NO NO YES NO NO NO YES NO

COUPLING FACTOR (dB) FM VHF UHF min/max min/max min/max -56/-51 -49/-45 -38/-35 -56/-51 -49/-45 -38/-35 -56/-51 -49/-45 -38/-35 -56/-51 -49/-45 -38/-35 -56/-51 -49/-45 -38/-35 -61/-56 -55/-51 -45/-42 -61/-56 -55/-51 -45/-42 -61/-56 -55/-51 -45/-42 -67/-62 -61/-57 -49/-46 -67/-62 -61/-57 -49/-46 -56/-51 -49/-45 -38/-35 -56/-51 -49/-45 -38/-35 -64/-59 -58/-54 -43/-46 -64/-59 -58/-54 -43/-46

COAXIAL COMPONENTS

figure “2”


FREQUENCY EQUALIZED DIRECTIONAL COUPLERS

FEATURES unflanged directional coupler low V.S.W.R and insertion losses only for indoor applications GENERAL FEATURES FREQUENCY RANGE

FM band 87.5 ÷ 108 MHz (EF) VHF band 174 ÷ 254 MHz (EV) UHF band 470 ÷ 860 MHz (EU) 50 ohm ≥ 30 dB See table below ≥ 30 dB ≤ ±0.15 dB See table below -10 ÷ +45° C See table below SMA F See table below No Aluminium Silver plated brass Teflon, rexolite Surtec 650

IMPEDANCE RETURN LOSS COUPLING FACTOR DIRECTIVITY FLATNESS MAX MEAN POWER OPERATING TEMPERATURE RANGE CONNECTORS PROBE CONNECTORS WEIGHT WATERPROOF MATERIALS - External body - Inner conductor - Insulator EXTERNAL FINISHING MAX MEAN POWER (kW) 300 200 100

6-1/8” RL 120 4-1/2”

50

20

3-1/8”

10

1-5/8”

5

7/8” COAXIAL COMPONENTS

7/16

1 0.5

0.2

N 40

50

VHF-BI

100

FM

200

VHF-BIII

500

UHF

1000

(MHz)

Specifications are subject to change without prior notice

160

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 120°C


FREQUENCY EQUALIZED DIRECTIONAL COUPLERS

figure “3” figure “2”

figure “1”

TYPE

CONNECTORS

Nr PROBES

FIGURE

ADR-01/EF/n/AA ADR-01/EF/n/AA ADR-01/EF/n/AA1 ADR-01/EF/n/AA1 ADR-01/EF/n/BB ADR-01/EF/n/BB ADR-01/EF/n/BB1 ADR-01/EF/n/BB1 ADR-01/EF/n/CC ADR-01/EF/n/CC ADR-01/EF/n/CC1 ADR-01/EF/n/CC1 ADR-02/EF/n/DD ADR-02/EF/n/DD ADR-02/EF/n/DD1 ADR-02/EF/n/DD1 ADR-03/EF/n/EE ADR-03/EF/n/EE1 ADR-04/EF/n/FF ADR-04/EF/n/FF1

NF - NF NF - NF NF - NM NF - NM 7/16 F - 7/16 F 7/16 F - 7/16 F 7/16 F - 7/16 M 7/16 F - 7/16 M 7/8 Unfl F - 7/8 Unfl F 7/8 Unfl F - 7/8 Unfl F 7/8 Unfl F - 7/8 Unfl M 7/8 Unfl F - 7/8 Unfl M 1-5/8 Unfl F - 1-5/8 Unfl F 1-5/8 Unfl F - 1-5/8 Unfl F 1-5/8 Unfl F - 1-5/8 Unfl M 1-5/8 Unfl F - 1-5/8 Unfl M 3-1/8 Unfl F - 3-1/8 Unfl F 3-1/8 Unfl F - 3-1/8 Unfl M 4-1/2 Unfl F - 4-1/2 Unfl F 4-1/2 Unfl F - 4-1/2 Unfl M

1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/4 1/4 1/4 1/4

1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 3 3 3 3

DIMENSIONS (max) A (mm)

B (mm)

C (mm)

WEIGHT kg (max)

105 165 123 183 102 162 111 171 138 198 128 187 170 230 190 250 160 160 184 184

104 104 104 104 104 104 104 104 104 104 104 104 119.5 119.5 119.5 119.5 110 110 151.5 151.5

50 50 50 50 50 50 50 50 50 50 50 50 60 60 60 60 184 173.6 184 173.6

0.60 1.13 0.65 1.18 0.68 1.21 0.72 1.25 0.59 1.12 0.62 1.15 0.93 1.69 1.06 1.82 2.37 2.17 2.90 3.02

Note: n = nr probes F = female / M = male (*) ambient temperature 40°C Specifications are subject to change without prior notice

161

MAX POWER kW (*)

COUPLING FACTOR (dB) min/max

0.75 0.75 0.75 0.75 4.1 4.1 4.1 4.1 7.3 7.3 7.3 7.3 17 17 17 17 50 50 75 75

-50/-70 -50/-70 -50/-70 -50/-70 -50/-70 -50/-70 -50/-70 -50/-70 -50/-70 -50/-70 -50/-70 -50/-70 -55/-75 -55/-75 -55/-75 -55/-75 -60/-80 -60/-80 -65/-85 -65/-85

COAXIAL COMPONENTS

FM Band


FREQUENCY EQUALIZED DIRECTIONAL COUPLERS

figure “3” figure “2”

figure “1”

VHF Band

COAXIAL COMPONENTS

TYPE

CONNECTORS

Nr PROBES

FIGURE

ADR-01/EV/n/AA ADR-01/EV/n/AA ADR-01/EV/n/AA1 ADR-01/EV/n/AA1 ADR-01/EV/n/BB ADR-01/EV/n/BB ADR-01/EV/n/BB1 ADR-01/EV/n/BB1 ADR-01/EV/n/CC ADR-01/EV/n/CC ADR-01/EV/n/CC1 ADR-01/EV/n/CC1 ADR-02/EV/n/DD ADR-02/EV/n/DD ADR-02/EV/n/DD1 ADR-02/EV/n/DD1 ADR-03/EV/n/EE ADR-03/EV/n/EE1 ADR-04/EV/n/FF ADR-04/EV/n/FF1

NF - NF NF - NF NF - NM NF - NM 7/16 F - 7/16 F 7/16 F - 7/16 F 7/16 F - 7/16 M 7/16 F - 7/16 M 7/8 Unfl F - 7/8 Unfl F 7/8 Unfl F - 7/8 Unfl F 7/8 Unfl F - 7/8 Unfl M 7/8 Unfl F - 7/8 Unfl M 1-5/8 Unfl F - 1-5/8 Unfl F 1-5/8 Unfl F - 1-5/8 Unfl F 1-5/8 Unfl F - 1-5/8 Unfl M 1-5/8 Unfl F - 1-5/8 Unfl M 3-1/8 Unfl F - 3-1/8 Unfl F 3-1/8 Unfl F - 3-1/8 Unfl M 4-1/2 Unfl F - 4-1/2 Unfl F 4-1/2 Unfl F - 4-1/2 Unfl M

1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/4 1/4 1/4 1/4

1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 3 3 3 3

DIMENSIONS (max) A (mm)

B (mm)

C (mm)

WEIGHT kg (max)

105 165 123 183 102 162 111 171 138 198 128 187 170 230 190 250 160 160 184 184

104 104 104 104 104 104 104 104 104 104 104 104 119.5 119.5 119.5 119.5 110 110 151.5 151.5

50 50 50 50 50 50 50 50 50 50 50 50 60 60 60 60 184 173.6 184 173.6

0.60 1.13 0.65 1.18 0.68 1.21 0.72 1.25 0.59 1.12 0.62 1.15 0.93 1.69 1.06 1.82 2.37 2.17 2.90 3.02

Note: n = nr probes F = female / M = male (*) ambient temperature 40°C Specifications are subject to change without prior notice

162

MAX POWER kW (*)

COUPLING FACTOR (dB) min/max

0.52 0.52 0.52 0.52 2.8 2.8 2.8 2.8 5 5 5 5 11.6 11.6 11.6 11.6 33 33 52 52

-45/-65 -45/-65 -45/-65 -45/-65 -45/-65 -45/-65 -45/-65 -45/-65 -45/-65 -45/-65 -45/-65 -45/-65 -50/-70 -50/-70 -50/-70 -50/-70 -55/-75 -55/-75 -60/-80 -60/-80


FREQUENCY EQUALIZED DIRECTIONAL COUPLERS

figure “3” figure “2”

figure “1”

TYPE

CONNECTORS

Nr PROBES

FIGURE

ADR-01/EU/n/AA ADR-01/EU/n/AA ADR-01/EU/n/AA1 ADR-01/EU/n/AA1 ADR-01/EU/n/BB ADR-01/EU/n/BB ADR-01/EU/n/BB1 ADR-01/EU/n/BB1 ADR-01/EU/n/CC ADR-01/EU/n/CC ADR-01/EU/n/CC1 ADR-01/EU/n/CC1 ADR-02/EU/n/DD ADR-02/EU/n/DD ADR-02/EU/n/DD1 ADR-02/EU/n/DD1 ADR-03/EU/n/EE ADR-03/EU/n/EE1 ADR-04/EU/n/FF ADR-04/EU/n/FF1

NF - NF NF - NF NF - NM NF - NM 7/16 F - 7/16 F 7/16 F - 7/16 F 7/16 F - 7/16 M 7/16 F - 7/16 M 7/8 Unfl F - 7/8 Unfl F 7/8 Unfl F - 7/8 Unfl F 7/8 Unfl F - 7/8 Unfl M 7/8 Unfl F - 7/8 Unfl M 1-5/8 Unfl F - 1-5/8 Unfl F 1-5/8 Unfl F - 1-5/8 Unfl F 1-5/8 Unfl F - 1-5/8 Unfl M 1-5/8 Unfl F - 1-5/8 Unfl M 3-1/8 Unfl F - 3-1/8 Unfl F 3-1/8 Unfl F - 3-1/8 Unfl M 4-1/2 Unfl F - 4-1/2 Unfl F 4-1/2 Unfl F - 4-1/2 Unfl M

1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/2 3/4 1/4 1/4 1/4 1/4

1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 3 3 3 3

DIMENSIONS (max) A (mm)

B (mm)

C (mm)

WEIGHT kg (max)

105 165 123 183 102 162 111 171 138 198 128 187 170 230 190 250 160 160 184 184

104 104 104 104 104 104 104 104 104 104 104 104 119.5 119.5 119.5 119.5 110 110 151.5 151.5

50 50 50 50 50 50 50 50 50 50 50 50 60 60 60 60 184 173.6 184 173.6

0.60 1.13 0.65 1.18 0.68 1.21 0.72 1.25 0.59 1.12 0.62 1.15 0.93 1.69 1.06 1.82 2.37 2.17 2.90 3.02

Note: n = nr probes F = female / M = male (*) ambient temperature 40°C Specifications are subject to change without prior notice

163

DTV MAX POWER kW (*)

ATV MAX POWER kW (*)

COUPLING FACTOR (dB) min/max

0.26 0.26 0.26 0.26 1.4 1.4 1.4 1.4 2.5 2.5 2.5 2.5 6.0 6.0 6.0 6.0 20 20 30 30

0.39 0.39 0.39 0.39 2.1 2.1 2.1 2.1 3.7 3.7 3.7 3.7 9.0 9.0 9.0 9.0 30 30 45 45

-35/-55 -35/-55 -35/-55 -35/-55 -35/-55 -35/-55 -35/-55 -35/-55 -35/-55 -35/-55 -35/-55 -35/-55 -40/-60 -40/-60 -40/-60 -40/-60 -45/-65 -45/-65 -50/-70 -50/-70

COAXIAL COMPONENTS

UHF Band


COAXIAL ELBOWS

FEATURES flanged / unflanged coaxial elbows low insertion losses low V.S.W.R indoor / outdoor applications*

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS MAX MEAN POWER OPERATING TEMPERATURE RANGE CONNECTORS WEIGHT PRESSURIZATION * MATERIALS - External body - Inner conductor - Insulator EXTERNAL FINISHING

0.1 ÷ 860 MHz ** 50 ohm ≥ 32 dB See table below -40 ÷ +70° C See table below See table below Typical operating pressure 300hPa (300mBar) Polished copper, polished brass, Aluminium Silver plated brass Teflon Painted Ral 7001, Nickel plating, Passivation SURTEC 650

* only for flanged types ** up to 790 MHz for 6-1/8”

MAX MEAN POWER (kW) 300 200 100

6-1/8” RL 120 4-1/2”

50

20

3-1/8”

10

1-5/8”

5

7/8” COAXIAL COMPONENTS

7/16

1 0.5

0.2

N 40

50

VHF-BI

100

FM

200

VHF-BIII

500

UHF

1000

(MHz)

Specifications are subject to change without prior notice

164

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 120°C


COAXIAL ELBOWS

figure “1”

figure “2”

figure “3” GMT-01 GMT-01/CP* GMT-03 GMT-04 GMT-05 GMT-06 GMT-07 GMT-10 GMT-17 GMT-11 GMT-12 GMT-15 GMT-16 GMT-18

CONNECTORS

7/8” EIA 7/8” EIA 1-5/8” EIA M-F 1-5/8” EIA 3-1/8” EIA 4-1/8” FL 6-1/8” EIA 4-1/2” EIA 7/8” Unfl. M 1-5/8” Unfl. M 3-1/8” Unfl. M 6-1/8” Unfl. M 4-1/2” Unfl. M RL 120 Unfl. M

FIGURE

2 4 3 2 2 2 2 2 1 1 1 1 1 1

DIMENSIONS

WEIGHT

A (mm)

B (mm)

C (mm)

D (mm)

(kg)

55 55 65 65 85 100 130 100 18.7 38.4 59.5 89.5 79.5 85

84 84 110 110 149 180 233 179.5 35 60 89 140 109 115

58 58 89 89 128 160 206 159 32 48 90 170 120 130

149 62.3 98.4 149 256.5 184.3 218

0.62 0.72 1.4 1.3 2.9 4 9.1 4.4 0.12 0.4 2.1 6.7 3.5 3.4

figure “4”

Note: F = female / M = male * with Capacitive Probe Specifications are subject to change without prior notice

165

COAXIAL COMPONENTS

TYPE


COAXIAL ADAPTORS

FEATURES flanged / unflanged coaxial elbows low insertion losses low V.S.W.R indoor / outdoor applications GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS MAX MEAN POWER OPERATING TEMPERATURE RANGE CONNECTORS WEIGHT PRESSURIZATION *

0.1 ÷ 860 MHz 50 ohm ≥ 32 dB See table below -40 ÷ +70° C See table See table Typical operating pressure 300 hPa (300 mbar) Polished copper, polished brass Silver plated brass Teflon Painted Ral 7001, Nickel plating

MATERIALS - External body - Inner conductor - Insulator EXTERNAL FINISHING * only for flanged types

MAX MEAN POWER (kW) 300 200 100

6-1/8” RL 120 4-1/2”

50

20

3-1/8”

10

1-5/8”

5

7/8” 7/16

1

COAXIAL COMPONENTS

0.5

0.2

N 40

50

VHF-BI

100

FM

200

VHF-BIII

500

UHF

1000

(MHz)

Note: Power handling is limited by the smallest size Specifications are subject to change without prior notice

166

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 120°C


COAXIAL ADAPTORS

figure “1”

figure “2”

FLANGED COAXIAL ADAPTORS

TRS-01 TRS-02 TRS-03 TRS-04 TRS-05 TRS-06 TRS-07 TRS-08 TRS-11 TRS-12 TRS-13 TRS-14 TRS-15 TRS-16 TRS-17 TRS-19 TRS-22 TRS-26 TRS-27 TRS-36 TRS-37 TRS-39 TRS-40 TRS-41 TRS-42 TRS-44 TRS-45 TRS-46

CONNECTORS 7/16 F 7/16 M 7/8” EIA M 7/8” EIA M 7/8” EIA 7/8” EIA 7/8” EIA 7/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA 1-5/8” EIA M 3-1/8” EIA 3-1/8” EIA 6-1/8” EIA 3-1/8” EIA 4-1/2” EIA 6-1/8” EIA 4-1/2” EIA 4-1/2” EIA 1-5/8” EIA M 6-1/8” EIA 4-1/2” EIA 6-1/8” EIA 3-1/8” EIA 1-5/8” EIA

FIGURE

NF NF NF NM NF NM 7/16 F 7/16 M NF NM 7/16 F 7/16 M 7/8” EIA 7/8” EIA 1-5/8” EIA NF 3-1/8” EIA 7/8” EIA 4-1/8” FL M NF 3-1/8” EIA NF 7/8” EIA 4-1/2” EIA 3-1/8” EIA 7/16 F 7/16 F Dezifix D

6 6 5 5 4 4 3 3 4 4 4 4 1 2 1 4 1 1 2 4 1 4 2 1 1 4 4 3

DIMENSIONS

WEIGHT

A (mm)

B (mm)

(kg)

45 59 42.5 39 83.5 80 63.5 66 123.5 120 111 125 83.5 60 110 162 150 120 65 207 95 150 21 150 117 194.5 149.5 138.5

32 35 58 58 58 58 58 58 89 89 89 89 89 89 128 128 150 128 159 206 159 159 89 206 159 206 128 98

0.14 0.19 0.3 0.32 0.3 0.36 0.2 0.28 1 1 1 1 0.77 0.85 1.5 3 3.8 1.3 2.6 6.4 3 3.5 0.65 4.5 2.5 4.8 3 2.6

Note: F = female / M = male Specifications are subject to change without prior notice

167

figure “3”

figure “4”

figure “5”

figure “6”

COAXIAL COMPONENTS

TYPE


COAXIAL ADAPTORS

figure “7”

figure “8”

figure “9”

UNFLANGED COAXIAL ADAPTORS TYPE

COAXIAL COMPONENTS

TRS-11/U TRS-12/U TRS-13/U TRS-14/U TRS-16/U TRS-17/U TRS-19/U TRS-22/U TRS-26/U TRS-27/U TRS-38/U TRS-41/U TRS-42/U TRS-43/U TRS-47/U TRS-48/U

CONNECTORS 1-5/8” Unfl. M 1-5/8” Unfl. M 1-5/8” Unfl. M 1-5/8” Unfl. M 1-5/8” Unfl. M 3-1/8” Unfl. M 3-1/8” Unfl. M 6-1/8” Unfl. M 3-1/8” Unfl. M 4-1/2” Unfl. M 6-1/8” Unfl. M 6-1/8” Unfl. M 4-1/2” Unfl. M 4-1/2” Unfl. M 4-1/2” Unfl. M 4-1/2” Unfl. M

FIGURE

NF NM 7/16 F 7/16 M 7/8” EIA 1-5/8” Unfl. M NF 3-1/8” Unfl. M 7/8” EIA 4-1/8 FL 1-5/8” Unfl. M 4-1/2” Unfl. M 3-1/8” Unfl. M 4-1/8” Unfl. M 7/8” EIA 4-1/2” EIA

9 9 9 9 8 7 9 7 8 8 7 7 7 7 8 8

DIMENSIONS

WEIGHT

A (mm)

B (mm)

(kg)

103 99.5 56.4 104 115 124.5 104 177 101 45 152.5 153 145 119 103 149

57.5 57.5 45 57.5 58 100 100 177 100 159 177 177 127 127 127 159

0.3 0.33 0.25 0.35 0.5 1 1 3.5 1 1.2 3 3.3 1.8 1.8 1.4 2

Note: F = female / M = male Specifications are subject to change without prior notice

168


COAXIAL ACCESSORIES

FEATURES flanged / unflanged coaxial accessories low insertion losses low V.S.W.R indoor / outdoor applications

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS MAX MEAN POWER OPERATING TEMPERATURE RANGE CONNECTORS WEIGHT MATERIALS - External body - Inner conductor - Insulator EXTERNAL FINISHING

0.1 ÷ 860 MHz 50 ohm ≥ 32 dB See table below -40 ÷ +70° C See table See table Polished copper, polished brass, Aluminium Silver plated brass Teflon Nickel plating, Passivation SURTEC 650

MAX MEAN POWER (kW) 300 200 100

6-1/8” RL 120 4-1/2”

50

20

3-1/8”

10

1-5/8”

5

7/16

1 0.5

0.2

N 40

50

VHF-BI

100

FM

200

VHF-BIII

500

UHF

1000

(MHz)

Specifications are subject to change without prior notice

169

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 120°C

COAXIAL COMPONENTS

7/8”


COAXIAL ACCESSORIES

BULLETS DIMENSIONS TYPE

CONNECTORS

INN-01 INN-02 INN-03 INN-07 INN-05

7/8” 1-5/8” 3-1/8” 4-1/2” 6-1/8”

WEIGHT

A (mm)

B (mm)

(kg)

59.8 78.4 100 10 125

20.65 41.75 81.2 105.3 154

0.02 0.1 0.3 0.6 1.3

GAS BARRIERS DIMENSIONS TYPE

CONNECTORS

BAR-01 BAR-02 BAR-03 BAR-04 BAR-05

7/8” EIA M 1-5/8”EIA M 3-1/8”EIA M 4-1/2”EIA M 6-1/8”EIA M

WEIGHT

A (mm)

B (mm)

(kg)

30 30 35 40 40

58 89 128 159 206

0.6 1.3 2.7 4.3 8.5

CLAMP FLANGE DIMENSIONS TYPE

CONNECTORS

FLN-33 FLN-01 FLN-02 FLN-10 FLN-27

7/8” EIA 1-5/8” EIA 3-1/8” EIA 6-1/8” EIA 4-1/2” EIA

WEIGHT

A (mm)

B (mm)

(kg)

29 41 42 64 35.5

58 89 128 206 159

0.2 0.5 0.9 2 1.2

STRAIGHT COUPLINGS DIMENSIONS

COAXIAL COMPONENTS

TYPE

CONNECTORS

FLN-31 FLN-03 FLN-04 FLN-09 FLN-28 FLN-35

7/8” Unfl. M 1-5/8” Unfl. M 3-1/8” Unfl. M 6-1/8” Unfl. M 4-1/2” Unfl. M RL 120 Unfl. M

WEIGHT

A (mm)

B (mm)

(kg)

47 78.4 100 95 71.6 70

30 60 100 177 127 142

0.15 0.3 0.81 2.2 0.9 1.1

Note: M = male Specifications are subject to change without prior notice

170


CABLE TEST SECTIONS

FEATURES direct antenna system VSWR testing quick and accurate measurements low V.S.W.R suitable for outdoor applications*

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS MAX MEAN POWER OPERATING TEMPERATURE RANGE CONNECTORS WEIGHT PRESSURIZATION *

See table 50 ohm ≥ 32 dB See table below -40 ÷ +70° C See table below See table below Typical operating pressure 300 hPa (300 mbar) Polished copper, polished brass Silver plated brass Teflon Painted Ral 7001

MATERIALS - External body - Inner conductor - Insulator EXTERNAL FINISHING * only for flanged types

MAX MEAN POWER (kW) 300 200 100

6-1/8” RL 120 4-1/2”

50

20

3-1/8”

10

1-5/8”

5

7/16

1 0.5

0.2

N 40

50

VHF-BI

100

FM

200

VHF-BIII

500

UHF

1000

(MHz)

Specifications are subject to change without prior notice

171

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 120°C

COAXIAL COMPONENTS

7/8”


CABLE TEST SECTIONS

figure “1”

COAXIAL COMPONENTS

TYPE

FREQUENCY RANGE (MHz)

CONNECTORS

FIGURE

PCM-04

up to 860

1-5/8” EIA

PCM-14

up to 860

PCM-24

DIMENSIONS A (mm)

B (mm)

C (mm)

WEIGHT (kg)

1

300

145

89

7

3-1/8” EIA

1

350

184

128

10

up to 860

4-1/2” EIA

1

430

208

159

15

PCM-25/V

174 ÷ 230

6-1/8” EIA

1

580

268

206

36

PCM-25/U

470 ÷ 860

6-1/8” EIA

1

580

268

206

36

Specifications are subject to change without prior notice

172

INSERT SECTION 1-5/8” - NF 1-5/8” - 7/16 F 3-1/8” - NF 3-1/8” - 7/16 F 4-1/2” - NF 4-1/2” - 7/16 F 6-1/8” - NF 6-1/8” - 7/16 F 6-1/8” - NF 6-1/8” - 7/16 F


CONNECTORS FOR COAXIAL CABLES

FEATURES flanged connectors low insertion losses low V.S.W.R indoor / outdoor applications

GENERAL FEATURES FREQUENCY RANGE IMPEDANCE RETURN LOSS MAX MEAN POWER OPERATING TEMPERATURE RANGE CONNECTOR WEIGHT PRESSURIZATION MATERIALS - External body - Inner conductor - Insulator EXTERNAL FINISHING

0.1 ÷ 860 MHz 50 ohm ≥ 32 dB See table below -40 ÷ +70° C See table below See table below Typical operating pressure 300hPa (300mBar) Polished brass Cu Zn Sn Silver plated brass Teflon Nickel plating

MAX MEAN POWER (kW) 300 200 100

6-1/8” RL 120 4-1/2”

50

20

3-1/8”

10

1-5/8”

5

7/16

1 0.5

0.2

N 40

50

VHF-BI

100

FM

200

VHF-BIII

500

UHF

1000

(MHz)

Specifications are subject to change without prior notice

173

STANDARD CONDITIONS: V.S.W.R. = 1.0 Ambient temperature 40°C Atmospheric Pressure, DryAir Inner Conductor Temperature 120°C

COAXIAL COMPONENTS

7/8”


CONNECTORS FOR COAXIAL CABLES

COAXIAL COMPONENTS

TYPE

CONNECTORS

FOR CABLE TYPE

CNN-05 CNN-25 CNN-27 CNN-76 CNN-31 CNN-41 CNN-61 CNN-113 CNN-114 CNN-81 CNN-50 CNN-56 CNN-54 CNN-29 CNN-57 CNN-58 CNN-55 CNN-59 CNN-20 CNN-22 CNN-28 CNN-24 CNN-51 CNN-26 CNN-93 CNN-94 CNN-33 CNN-34 CNN-32 CNN-91

7/8” EIA M 7/8” EIA M 7/8” EIA 1-5/8” EIA 1-5/8” EIA 3-1/8” EIA 4-1/2” EIA 4-1/2” EIA 6-1/8” EIA 6-1/8” EIA NM N M (90°) NF 7/16 M 7/16 M (90°) 7/16 F 7/8” EIA M 7/8” EIA F + INN NM NF 7/16 M 7/16 F 7/8” EIA M 7/8” EIA F + INN 7/16 M 7/16 F 7/16 M 7/16 F 1-5/8” EIA F 3-1/8” EIA F

3/8” HELIFLEX HCA 38-50J 7/8” HELIFLEX HCA 78-50J 7/8” HELIFLEX HCA 78-50J 1-1/8” HELIFLEX HCA 118-50J 1-5/8” HELIFLEX HCA 158-50J 4” HELIFLEX HCA 400-50J 5” HELIFLEX HCA 495-50J 5” HELIFLEX HCA 495-50J 5-1/2” HELIFLEX HCA 550-50J 6-1/8” HELIFLEX HCA 618-50J 1/2” DRAKA RFA 1/2”-50 1/2” DRAKA RFA 1/2”-50 1/2” DRAKA RFA 1/2”-50 1/2” DRAKA RFA 1/2”-50 1/2” DRAKA RFA 1/2”-50 1/2” DRAKA RFA 1/2”-50 1/2” DRAKA RFA 1/2”-50 1/2” DRAKA RFA 1/2”-50 7/8” DRAKA RFA 7/8”-50 7/8” DRAKA RFA 7/8”-50 7/8” DRAKA RFA 7/8”-50 7/8” DRAKA RFA 7/8”-50 7/8” DRAKA RFA 7/8”-50 7/8” DRAKA RFA 7/8”-50 1-1/4” DRAKA RFA 1-1/4”-50 1-1/4” DRAKA RFA 1-1/4”-50 1-5/8” DRAKA RFA 1-5/8”-50 1-5/8” DRAKA RFA 1-5/8”-50 1-5/8” DRAKA RFA 1-5/8”-50 2-1/4” DRAKA RFA 2-1/4”-50

Note: F = female / M = male Specifications are subject to change without prior notice

174


NOTES


NOTES


NOTES


NOTES


Antennas - Catalogue 2011

ANYWHERE THE SOLUTION


Antennas - Catalogue 11  

The range of antennas and components from SIRA includes more than thirty years of experience in the design, manufacturing and installation o...

Advertisement
Read more
Read more
Similar to
Popular now
Just for you