Wireless fire detection line Wireless devices for fire detection
elmospa.com Global security solutions
Wireless fire detection
W
ith the new wireless devices line, EL.MO. offers the possibility to extend the fire detection also to wireless system. It expands the range of use reaching places that otherwise would be excluded. The wireless device line is the ideal solution for environments with difficult or completely impossible wiring and to hold down the installation costs and the systems start up times.
Thanks to the WME100 expander module is possible to interface to conventional control unit up to 32 wireless devices for each conventional line. It is also possible to integrate the wireless system to the analogue-addressed systems, thanks to the use of the MCM-AS3B optional modules for interfacing on the AS loop or to MCIEBOX for loop IE. The line is complete with all the devices required for systems, also for large dimensions, which ensure the highest level of security.
Line composition The wireless fire detection line is composed by following devices: • 1IWMBOX: Self-powered input module that allows the connection of other devices (for example gas sensor) to detection system • WCP100: Manual resettable call-point • WTU: Wireless programming keyboard
• WME100: Expander module for conventional systems that allows the connection up to 32 wireless devices on conventional detection line. • WSD100: Smoke optical detector (Tyndall effect) • WHD350: Rate of Rise heat detector • WSHD200: Rate of Rise detector
WME100
WTU
• Expander module
• Wireless programming keyboard
1IWMBOX
• Self-powered input module
WCP100
• Manual alarm call point
WSD100
• Optical smoke detector
WHD350
• Rate of rise heat detector
info@elmospa.com
WSHD200
• Smoke and Rate of rise detector
6 reasons to use wireless technology in the fire field
CPR certification
Wireless
• The series is certified CPR 305/2011
• Any cable or tube
Completion time
Integration
• It integrates with system managed by TACÓRA series control unit or FX series
• Speed of installation and programming
Expansion
Wiring
• Available input module
• Costs reduction of the wiring
WIRELESS With wireless devices is possible to extend the fire detection also to environments in which the wired detection is excluded due to aesthetic-functional constraints or it is impossible to realize a wired system.
INTEGRATION The wireless detection system integrates with all EL.MO. fire detection control unit: • TA1002 and TA1004: directly on one or more conventional lines • TA2000: directly on one or more conventional lines and/or on AS loop via MCM-AS3B optional module or on IE loop via MCIEBOX optional module. • FX series: on loop with AS protocol through the MCM-AS3B optional module or on loop with IE protocol through MCIEBOX optional module.
WIRING The wireless technology eliminates the use of cables for the connection of sensors, call-points and input module. This allows to reduce costs and installation times.
CPR CERTIFICATION The devices of the EL.MO. wireless line are certified CPR 305/2011 ensuring the compliance with the Regulations in the fire field.
EXPANSION Thanks to the input module, it is possible to integrate in the wireless system also wired devices, allowing the creation of complete and articulated systems.
COMPLETION TIMES The configuration of wireless devices is very quick and simple. Moreover, thanks to the supplied Wirelex-Fire programming software, it is possible to test the quality of the signals transmission.
elmospa.com
Wireless fire detection Conventional system expander module WME100 SGCWE100 Module allows the connection to a conventional detection line up to 32 wireless devices signaling to the control unit the alarm and/or fault status. The alarm and/or fault status is signaled through proper relay to the detection line such as a conventional detector. It can be easily configured by PC via RS232 through “Wirelex-Fire” supplied software. The software allows also to check the transmission quality. Technical features • • • • • • • • • • • • • • • •
Bi-directional wireless communication. It can manage up to 32 wireless devices. Wireless signal range: 200m in open field. It manages up to 7 channels. Automatic control of the wireless signal power. Double orthogonal antenna that ensure the communication reliability. Automatic optimization of the frequency and communication level, automatic channel selection. Operation frequency: 868.15 MHz – 869.85 Mhz Modulation type: FSK Radiated power: 5 dBm (3mW) Operating temperature: -30°C - +50°C Protection class: IP51C Dimensions: W 120 x H 160 x D 50mm (without antennas), weight 330g Power consumption: 60mA (in alarm) External power supply (directly from control unit or power supply) CPR305/2011 certification (ex CPD 89/106/EEC certification) EN 54-25:2008 and EN 54-18:2005
Wireless keyboard WTU PU Wireless keyboard for the configuration and the supervision of the devices integrated in the system. The keyboard can be used for the first configuration and programming of the devices and also for following reprogramming. It allows the status monitoring of the associated devices. Through a graph displayed on the monitor, it allows to analyze the wireless signal quality of the devices. Technical features • • • • • • • • • • • • • •
info@elmospa.com
Wireless maximum operating range: 200m Can be integrated in the system up to 8 WTU keyboards Up to 30 user codes Backlit keyboard Backlit screen based on the system status: green for standby, red for alarm or fault. Tamper protection against openign and against removal tear from wall Lithium battery completely controlled: 9V / 1,2 Ah battery (medium life 1 year) Supplied battery Connection to the expander through wireless or RS232 Operating temperature -10°C+55°C Protection class: IP41 Dimensions: W 130 x H 145 x D 30mm, weight 300g Can be powered by mains through external not supplied power supplied unit (AC220V/DC12-27V or AC220V/AC9-24V (100mA)) or external power supply DC12V-DC24V (DC 10,8-27 V) on terminal Power consumption from external power supply unit or external power supply: max 40mA.
Wireless fire detection sensors Common features • Bidirectional wireless communication. • Maximum distance between sensor and expander: 200m in open field • Automatic control of the wireless signal power. • Double lithium battery completely controlled: CR123A main battery (medium life 5 years), CR2032A secondary battery (medium life 2 months) • Supplied batteries • Immediate transmission of the status: alarm, fault removal. • Base included • Magnetic test • High rejection to false alarms • Operation frequency: 868 MHz • Modulation type: FSK • Operating channels: 7 • Radiated Power: 5dBm (3 mW) • Bi-colour LED placed at the center of the sensor that allows 360° viewing • Operating temperature -10°C+55°C • IP21C grade • Dimensions: 110mm x P65mm diameter, weight 130g (included base)
WSD100
SG100 Smoke detector (Tyndall effect). The wide range of analogue detection, provides the alarm signal when the amount of smoke exceeds a certain threshold. The complete symmetry of the optical camera provides excellent smoke sensitivity in every direction. A special entrance of smoke protects the optical chamber from dirt any small insects. CPR305/2011 certification (ex CPD 89/106/EEC certification) EN54-7:2000 + A1:2002 + A2:2006 and EN54-25:2008
WHD350
SG350 Rate of rise heat detector (A1R class, threshold 58°C). It measures the environment temperature through a specific sensor with low heating resistance and trigger an alarm when the temperature or its variations exceed a certain threshold. CPR305/2011 certification (ex CPD 89/106/EEC certification) EN54-5:2000 + A1:2002 and EN54-25:2008
WSHD200
SG200 Smoke and Rate of rise detector that combines the optical sensor functionality to the sensor (A1 class, 58°C threshold). The alarm status is determined by an algorithm that analyzes the variation of the smoke and temperature quantity. A special entrance of smoke protects the optical chamber from dirt any small insects. CPR305/2011 certification (ex CPD 89/106/EEC certification) EN54-5:2000 + A1:2002, EN54-7:2000 + A1:2002 + A2:2006 and EN54-25:2008
elmospa.com
Wireless fire detection Wireless call-point WCP100
SGCP100 Manual resettable call-point. The restore is possible by turning the supplied key. If it is removed from its housing, the call-point sends a fault message. Bicolour LED (red and green) signals the call-point button and the battery charge status. In addition to the LED managed by the system, a graphic symbol provides information on the call-point activation. • • • • • • • • • • • • •
Bidirectional wireless communication Maximum distance between call-point and expander: 200m in open field Automatic control of the wireless signal power Double lithium battery completely controlled: CR123A main battery, (medium life 6 years), CR2032A secondary battery (medium life 2 months) Supplied battery Immediate transmission of the status: alarm, fault, removal. Operation frequency: 868 MHz Modulation type: FSK Operating channels: 7 Radiated Power: 5dBm (3 mW) Operating temperature: -10°C+55°C Dimensions: W86 x H86 x D59mm, weight 186g (without battery) CPR305/2011 certification (ex CPD 89/106/EEC certification) EN5411:2001+A1:2005 and EN54-25:2008
Expansion modules 1IWMBOX SGMI200 Self-powered module that allows the connection of another device to the wireless detection system. It is equipped by an input that allows the supervision through end of line resistor. It identifies the interruption or short circuit of the connection line and send the status to the control unit. It is equipped by a plastic housing with IP65 protection grade. Technical features • • • • • • • • • • • • •
info@elmospa.com
Bidirectional wireless communication. Maximum distance between module and expander: 200m in open field Automatic control of the wireless signal power. Double lithium battery completely controlled: CR123A (medium life 6,5 years), CR2032A secondary battery (medium life 2 months) Supplied battery Immediate transmission of the status: alarm, fault, removal. Operation frequency: 868MHz Modulation type: FSK Operating channels: 7 Radiated Power: 5dBm (3 mW) Operating temperature: -30°C+55°C Housing dimensions: W 136mm x H 96mm x D 57mm Certified CPR305/2011 (ex CPD 89/106/EEC certification) EN54-18 and EN5425:2008
TA1002 and TA1004 functional scheme
TA2000 functional scheme
FX series functional scheme
elmospa.com
elmospa.com info@elmospa.com
L i n e s
Intrusion Detection
Access
Fire
Detection
Videosurveillance
LED
Lighting
Home Management
Management
SW
Solutions
Supervision
SW
Stamp dealer
D.56.0315.3
Building Automation
OEM
Control
Products features as described above do not bind the manufacturer and may be modified without prior notice
P r o d u c t
Global Security Solutions
EL.MO. S.p.a. Via Pontarola, 70 IT - 35011 Campodarsego
Tel.+39.049.9203333 Fax +39.049.9200306