How To Install Magnetic Shower Door Seals

How To Install Magnetic Shower Door Seals Magnetic shower door seals that fit over the glass on shower doors. The magnets are made at a slight angle so that they can be used on either sliding doors that come together straight Or if you turn one seal up the other way they come together at a slight angle which then makes them suitable for sliding doors on quadrant shower enclosures. •

This listing is for a pair of magnetic door seals that fit over the glass on shower doors with 4-6 mm glass. The maximum gap they can span between to glass doors is 19 mm.

•

If you are unsure please send us a small piece of your old seal first and we will try to match it up for you.

magnetic shower door seals

These seals fit most types of straight or quadrant sliding doors with the above measurements.

Please note they are not suitable for pivot doors that close at an angle of 90 degrees. Magnets that close at 90 degrees are available on our website.

Simply remove your old magnetic shower seals from the glass, cut the new magnetic seal to length, turn the seals over to make them suitable for either a straight or quadrant door and push the new magnetic shower seals on to the glass doors.

•

2 Year guarantee

•

Modern easy fit design

•

200 cm ( 2 M ) Long. Sold in Pairs Only

•

Strong, durable and easy to install

•

No DIY knowledge necessary

•

Easily cut to size

•

Available in any quantity for bulk orders

•

Pair of Magnetic Door Seals for 4-6 mm glass doors

•

Can be used on straight or quadrant sliding doors

•

Will close a gap between two doors of up to 19 mm & available in pairs only 2000 m (2 M Long)

•

Simply turn one seal up the other way to alter if the seals come together straight or at a slight angle as shown in pictures below

Original Source :- Magnetic Shower Door Seals