Manufactory Wholesale 16 In 1 Agile CATV Analog Modulator
AH1916AM for 860MHz Frequency Range with NTSC/PAL
Configurations
Looking for a reliable solution for adjacent channel headend applications? The 16 In 1 Agile CATV Analog Modulator AH1916AM features a 4RU rack-mounted chassis with 16 high-quality SAW filtered frequency agile modulators, covering a broad frequency range of 45-860MHz. With low out-of-band noise, full frequency agility, and independent channel configuration, this modulator is perfect for broadcast, hotel, and cable TV systems. Key features include a 105 dBµV output level, ±10KHz frequency stability, and non-volatile memory for uninterrupted operation.
• 16 independent SAW filtered modulators | • Full frequency agility (45-860MHz) | •
Low out-of-band noise | • Non-volatile memory | • NTSC/PAL configurations
The AH1916AM is a 4RU rack mounted chassis that can install 16 pieces of high quality SAW filtered frequency agile modulators covering 860MHz.
The AH1916AM is a 4RU rack mounted chassis that can install 16 pieces of high quality SAW filtered frequency agile modulators covering 860MHz. Low out-of-band noise makes this 16 in 1 agile CATV analog modulator ideal in adjacent channel headend.
Features
1.Full frequency agility allows the rapid creation of channel lineups
2.Each channel of this 16 in 1 agile CATV analog modulator is completely independent. Channel configuration is flexible
3.Two cooling fans for heat-sinking prolong service life
4.None-volatile memory ensures channel programming remains after power loss
5.Two-digit LED display provides quick channel identification
6.Available in NTSC or PAL configurations
Specifications of 16 In 1 Agile CATV Analog Modulator
RF Frequency Range 45 ~ 860 MHz
Output Connector F Connector
Output Level 105 dBµV (Adj.)
Test Point -20 dB
Isolation Port to Port ≥ 35 dB
GENERAL
Return Loss ≥ 12 dB
Gain + 8 dB
Modulator Capacity 16
Input Voltage Range 110V or 220V
Cooling Fan 2
Consumption 70W (Fully Loaded)
Dimension 42 * 17 *20 cm Net Weight
KG (Fully Loaded)
KG (Chassis Only)
RF
Shipping Weight
KG ( Fully Loaded)
Carton Size 53 * 30 * 24 cm
Modulator Card
Output Frequency 45 ~ 860 MHz any channel
Output Level 103 dBµV (Adj.)
Output Connector F Connector
A / V Ratio -11 ~ -18 dB (Adj.)
Frequency Stability ±10KHz
Video Input Level
0.6-1.5Vp-p (87.5% Modulation)
Video Input Connector Yellow RCA
Audio Input Level 1Vp-p (25KHz Dev.)
Audio Input Connector White RCA
GENERAL Voltage DC 5V
PRECAUTIONS
PRECAUTIONS
REQUIREMENTS
Avoid heat buildup
Ensure easy access to rack wiring
Facilitate servicing and maintenance
Avoid direct heating or air conditioning
AC power source outlets
Rack support
Building leakage
Allow rack space (1'')between powered headend product in the equipment
Allow a minimum of 18inches behind the equipment rack
Allow a minimum of 36'' of clearance in front of the equipment rack
If unavoidable, use deflector plates
Locate equipment near sufficient outlets to provide power for test equipment and power tools
Make certain rack supports are sufficiently rigid to support racks
Beware of dripping water onto equipment from leaky roofs, waveguide roof entries, and cold water pipe condensations
About Us
FMUSER is a company specializing in broadcasting and television transmission systems and integrating hotel IPTV systems. The company was established in 2009 and has served over 180 countries worldwide. More than 20,000 television stations, radio stations, and hotel clients from different.