HD™ Ball Plug
1007-00
2-Gallon HD™ Kit (3 half-gallon HD™ resin compound, 1 half-gallon HD™ hardener)
1023-05
HD™ Resin Compound (1 half-gallon)
1022-11
HD™ Hardener (1 half-gallon)
HR™ Hardener
1005-00
2-Gallon HR™ Kit (3 half-gallon HD™ resin compound, 1 half-gallon HR™ hardener)
1022-05
HR™ Hardener (1 half-gallon)
• Designed to produce perfect plugs in heat-sensitive situations where other products fail.
• Has proven successful in reactive resin, urethane, and polyester bowling balls.
• Great for oversize holes; designed to do the job without two-staging.
• Excellent adhesion to all cover stock materials.
• Plugs holes in thick urethane and resin cover stocks without cracking, chipping, or color burnout.
• Extremely crack, chip, and impact resistant. • Virtually no post-cure shrinkage so you will not have to worry about separation or flat spots.
• Cures in 10-16 hours at recommended temperatures.
• No air bubbles as it allows trapped air to escape before it cures. • Drills straight and true without bit chatter or chipping around the rim. • Cures in 6-8 hours at recommended temperatures. • 3:1 ratio of resin compound to hardener. • Available in 2-gallon kits.
Ball Plugging Pumps 1103-05
HD™ Pump Set (for item no. 1007-00)
1118-08
HR™ Pump Set (for item no. 1005-00)
These pumps are precalibrated for use with HD™ and HR™ Ball Plug to dispense the proper 3:1 ratio of resin compound to hardener.
Insta-Patch™ Kit
1310-05
Insta-Patch™ Kit
Note: HR™ Hardener is compatible with any ball type, but we do not recommend using it in polyester balls, small holes in urethane, or small holes in resin bowling balls since cure time will extend beyond 16 hours.
• Allows for fast repair of scratches, nicks, and gouges in ball surfaces.
Perma-Fill™ Engraving Fill
• Cures in about 1 hour at room temperature, and in about 5-10 minutes with an external heat source.
• Extremely impact resistant when cured and exhibits excellent adhesion to all ball surfaces. • Repairs long scratches in one application without running, even on non-horizontal surfaces.
• Compatible with ball plug tints and pigments in small amounts. • 4:1 ratio of resin to hardener.
Ball Plugging Dams 1302-08
Round Thumb Plugging Dams (150)
1302-11
Oval Finger Plugging Dams (100)
• Leak-free and easy to use, exhibit excellent adhesion to all bowling ball cover stocks.
1610-04
Lightning Yellow Perma-Fill™ (1oz.)
• Each 15-ounce Insta-Patch™ Kit will repair approximately 60 bowling balls.
1610-13
Arctic White Perma-Fill™ (1oz.)
• The Insta-Patch™ Kit includes one 12-ounce resin, one 3-ounce hardener, 50 graduated mixing cups, and stir sticks.
Perma-Fill™ is a paste engraving fill that is totally permanent and will not discolor, fall out, or absorb fluids from the lanes. Application is easy with the included squeegee. Just place a dab in the center of the engraving and wipe back and forth in all directions. Allow it to dry for a few minutes and simply wipe away excess with a damp cloth. Solvent-free and non-toxic.
• Each box of plugging dams contains 25 concentric units that pull apart into 150 round or 100 oval dams.
1.800.235.8324
www.techlineproducts.com
5oz. Mixing Cups 1304-05
5oz. Ball Plug Mixing Cups
Perfect for ball plugging. Provides room for mixing and the markings for measuring. Contains 50 mixing cups.
Made in u.s.a.