Shielded and Unshielded Ethernet Cables: Making the Best Buy Digital Signal Processing is the process of transmission and production of data that takes place without any interference. This process asks for an Ethernet Cable. Most of the wired networks of today including routers, PCs and switches use Ethernet cables for the smooth transmission of data. These Ethernet Cables are of two types – Shielded and Unshielded. They are also known as STP (Shielded Twisted Pair) and UTP (Unshielded Twisted Pair). The question that arises next is which one out of the two you should buy? To find this out, make sure you know about the environment you need Ethernet cables for. One of the major reasons behind networks slowing down is - voltage interference. Hence, you must make sure that the electrical line intersects with low voltage communication cable at 90 degrees. Given below are some other factors you should consider before buying shielded or unshielded Ethernet cables.
❏ Alien CrossTalk The antenna of Ethernet cables are like the cross-section. During the times of high frequency signal transmission, Alien CrossTalk (AXT) creates major hindrances. To avoid this, you need to know what is causing interference - the near end crosstalk or the foreign interference. Once you find that out, you can decide which cable to use for installation. In order to curb the effects of ATX, one should choose a shielded cable. Even if the shields are electrically bonded, robust grounding is must. Natural grounding can be enabled by appropriate couplers and jacks.
1
http://www.sfcable.com/