How Strong Your Ethernet Cables Should be?

How Strong Your Ethernet Cables Should be?

Setting up an Ethernet system is challenging. While different industries have their own set of requirements, it is a vital thing to choose a Network Ethernet Cable that is flexible to confront industrial obstacles. Its uses are different. For example, the cable of your office’s desk would not be able to handle the industrial usage. Considering the latest market scenario, ​Cat 6A cables are perfectly suitable for industrial use. If you still use cat5e cables, they may not be able to fulfill performance standards.

Let’s look out for some situations wherein a low-quality, not standardize cables fail to provide an expected performance.

Installation While you install the network ethernet cable in the system, a commercial-grade with excessive force might stretch the cable. According

1​ ​

to commercial standards, the maximum pulling tension should be 25-pound. Means, if the cable’s length is 100 feet, you will end up with the cable length of 100 feet and 2 inches. Eventually, it results in signal loss and performance delay. Such type of effects limits the distance that your cable can suffice.

Furthermore, when you settle up the cables, the twisted pair may open up. It causes coupling from pair-to-pair, returns loss and susceptibility to ambient EMI/RFI. Eventually, it becomes high maintenance providing slower speed, crosstalks, and gapping effects.

UV Effects Temperature plays a vital role when it comes to cable performance. And that too for industrial environments. For example, extreme cold makes your cable stiff and brittle to work with. On the other hand, extremely hot temperatures can affect the plastic used in it. That’s why it’s important to select the bulk network cables which are resistant to ambient temperatures.

Cat5e cable expands at a rate of 0.4% per degree Celsius above 20° C. At 60° C, it may expand by 16%. Therefore, it is critical to select a ​network

2​

ethernet

cable

that

offers

industrial-strength,

high-temperature

performance.

Oil Contacts When you select a cable for the industrial use, make sure that they are resistant to fluids. The problem with the low-quality cable is that they soak in the petroleum-based fluids.

As a result, it might impact your mechanical strength, leaving the inner core prone to pollution. While choosing cables for industrial use, make sure to check oil-resistant jackets that combat with such challenges.

Rough Usage Network cables especially used for industries might experience harsh usage on a daily base. The productivity and speed of the cable are depended on data transmission. And to ensure the network performance, check if your cable is qualified for such industrial-grade jackets.

3​

And in the market, there are cables like ​bulk network cables which provides an extra measure of protection, combining bonded-pair technology with interlocked components to provide the protection against such rough uses.

Grounding This is the most important step for effective shielding. A proper grounding can degrade the shield effect. Ideally, it is considered to ground the shield at only one point. When there is combined interference on the shield, the current might drain into the ground. That too before the pairs which are already underneath and affected.

This combination of unbonded versus bonded UTP cable reflects the potential gaps that occur within unbonded cables. It might slow down the installation. Therefore, the ground currents passing on the shield can actually make the shield a source of interference on the signal-carrying pairs.

Noise When you select a balanced cable, it performs stably against loud noise instances. The bonded-pair cables provide the approximation of balance.

Even after the installation and daily harsh use! Therefore, the cables with

4​

such features can either make or break an Industrial Ethernet application in the presence of any type of noise.

Industry Standards A standard for every cable is the main benefit when it comes to Ethernet systems. Telecommunications Industry Association (TIA) associated with the Electronic Industries Alliance (EIA) manages the current standard for the commonly used cables. ● The TIA/EIA-568B describes the standard for commercial uses. ● The

TR-42

Committee

describes

the

standard

for

telecommunications infrastructure. ● The TR-42.9 Subcommittee covers industrial telecommunications infrastructure.

In a Nutshell Environmental uses affect your networking system if your network ethernet cables are not up to industry standards. Although it is critical to render reliable performance to your uses. Therefore, make sure to install cables that provide high-level strength and stability.

5​

This Article is originally posted here; ​How Strong Your Ethernet Cables Should be?

If you found this article useful, here are some others that may be of interest.

7 Factors to Choose the Right Industrial Ethernet Cable Selecting the Right Bulk Network Cables: How to Go About It? Things to Keep in Mind while Installing Network Cables

6​