Dos and Don’ts of Handling Your Load Cell

Article: Sensomaticloadcell.net

Dos and Don’ts of Handling Your Load Cell A load cell is a sensitive tool to assess force. It is also known as a force transducer and can convert a mechanical force in the form of a load to an electrical output signal. The output can then be measured and standardised. Load cells can handle a significant amount of force.

For high capacity uses, a double ended load cell can come in handy. These are sensitive instruments that need to be handled with care to ensure proper maintenance and accurate performance. Here are some dos and don'ts to keep in mind while managing your load cell.

Why Do you Need to Be Careful while Using a Load Cell?

When you buy from reliable load cell manufacturers in India, you can rest assured that you will get a high-quality product. However, you must be careful to make the best use of your load cells by following some simple tips. The benefits of exercising care while using a load cell are: ● Longer life of the instrument ● Greater accuracy of results ● Lower chances of malfunctioning What Should you do while managing your Load Cell?

Here are the things you have to do if you use a load cell: ● Do check the calibration certificate: The calibration certificate provided by the manufacturer will include details like temperature ranges, recommended power supply, environmental protection and input/output resistance. Do read this document carefully and ensure the installation of your load cell as per these specifications. ● Do clean the load cell regularly: Even though load cells do not require special maintenance, they do require cleaning. You should remove dirt and other waste from the movable parts and scales of a load cell. This step can ensure easier maintenance and greater accuracy of this sensitive instrument. ● Do conduct visual checks: You should keep an eye on the surfaces of your load cells for any signs of damage or dirt. Even if you own a corrosion-resistant stainless steel load cell, the product may show signs of damage if it comes in contact with things like abrasive chemicals. Regular checks will ensure that potential problems are identified and addressed on time.

What Should you Not Do while Handling Your Load Cell?

Whether you own a weighbridge load cell or a simple S-type one, there are some absolute no-no’s when it comes to handling your product. The following are things you should avoid:

Article: Sensomaticloadcell.net ● Don't clean with Harsh Chemicals: You should never use an abrasive chemical product to clean out the load cell surface or its silicone coating because this can damage the product. ● Don't mount load cells in a harsh environment without necessary safeguards: Do not install the load cell at a place known for inclement weather conditions unless you have a strong metal cover to protect it from damage. ● Do not mishandle the load cell cable: You should never manipulate the load cell cable by cutting it off. You must also not pull the instrument by its cable as it can damage the sensors.

If you follow these simple rules, you should be able to ensure a long life for your load cell.

You may also be planning to buy a new load cell. In that case, you can get it from Sensomatic Load Cell, one of the best load cell suppliers in India. They have a large variety of high-quality load cells for all kinds of needs.

About the Company: Sensomatic Load Cell is one of the leading load cell manufacturers in India, and the first-ever company to initiate the manufacture and supply of superior-quality load cells in the country.

Compared to the other manufacturers and suppliers in Asia, their rates are more reasonable and uphold international quality standards. Sensomatic’s first facility was founded in 2004.

Initiating manufacturing operations at Phursungi in Maharashtra the company has since then extended its footprint across major cities. It is considered the most trusted load cell supplier in Delhi.