Securemme generale catalogo by 1 1

INDEX

2. 4. 6. 7. 8. 9. 10. 11. 12. 15. 15. 16. 20. 22. 24. 26. 27. 28. 29. 30. 32. 34. 35. 36. 37. 38. 39. 41. 40. 42. 44. 45. 46. 48. 50. 52. 53. 58. 62. 63. 64.

GENERAL SALE TERMS / LEGEND MORTICE LOCKS DOUBLE WARD TIGHT LOCKS FOR METAL DOORS CYLINDER EXTENSION LOCKS FOR METAL DOORS DOUBLE WARD LOCKS FOR ROLLING SHUTTERS AND BALANCING DOORS CYLINDER LOCKS FOR ROLLING SHUTTERS AND BALANCING DOORS DOUBLE WARD TYPE LOCKS TO APPLY LITTLE SAFES AND SECURITY CABINET FOR GUNS SAFE LOCKS 6/8 LEVERS ELECTRONIC SAFE LOCKS ACCESSORIES AND SPARE PARTS FOR SAFES SAFETY DOOR LOCKS LINE 25 SAFETY DOOR LOCKS LINE 25M SAFETY DOOR LOCKS LINE 26 REINFORCED TOTAL LOCKS SAFETY DOORS LOCKS LINE 27 RESTYLING SPARE PARTS AND ACCESSORIES FOR LINE 27 RESTYLING CYLINDERS LINE KY CYLINDERS LINE K1 CYLINDERS LINE K2 CYLINDERS LINE K3 SITE CYLINDERS CYLINDERS: SPARE PARTS PROTECTOR BLINDO LINE T KIT LINE T OF PROTECTION PROTECTOR FORTEZZA PROTECTOR OVAL LINE O KIT OF PROTECTION DOUBLE WARD PROTECTOR ESCUTCHEONS LINE T ESCUTCHEONS LINE O ESCUTCHEONS KITS FOR SAFETY DOORS ACCESSORIES KIT SWITCHES LIMITING DEVICES ACCESSORIES KEYS SPARE PARTS: HEARTS FOR UNIVERSAL LOCKS LINE 25 CYLINDER KIT 26 DOOR VIEWERS

BK BR CR NK OT ZB ZT F1 F3

= = = = = = = = =

F4 F5 F9 OL PV OS CL CS

= = = = = = = =

GENERAL SALES TERMS and under the condition of their normal use and installation. The guarantee is valid only for material which has been supplied, excluding any recognition of charges for labour or anything else necessary for disassembly and re-assembly of a product held to be defective. Defects control is uniquely up to Securemme Srl staff. Securemme Srl will not be held responsible for guarantee conditions in the case that SECUREMME ORIGINAL ACCESSORIES AND SPARE PARTS (for example keys) wonâ&#x20AC;&#x2122;t be used or if the product has been modified, repaired or altered by unauthorised people. In no case will Securemme Srl be held responsible for any damage which is a consequence of the unsuitability of the product for its type of use. In particular, Securemme Srl is not held to guarantee: - that the product cannot be manipulated or damaged by ill-intentioned people; - that the product is able to prevent damage to things and people during burglaries, hold-ups or other criminal acts. Consequently Securemme Srl will not be subject to any responsibility, either civil or penal, in the case of damage to things or people which are questionable on the basis of the inefficacy of the product supplied. Securemme Srl will not be held responsible for guarantee conditions in the case that the buyer doesnâ&#x20AC;&#x2122;t respect the payment terms agreed.

SALE TERMS WORLDWIDE MARKET 1 ORDERS All orders are subjected to Securemme s.r.l. final confirmation. 2 PACKAGING Packaging charges are included in price. Any special packaging will be charged to the customer. Packaging unit are not divisible. 3 DELIVERY Delivery dates are indicative. No compensation will be paid if lack of part or of all the goods should occur. 4 TERM OF DELIVERY Goods are delivered EX WORKS our factory. 5 TRANSPORT Goods always travel at the risk of the customer even if shipped carriage-free. 6 INVOICING For export deliveries the minimum amount per invoice is Euro 1.500,00. For lower amounts, Euro 25,00 will be charged as contribute for order management. 7 COMPLAINTS No returns of goods will be accepted when the consignment complies with the order. Any complaints must be communicated in writing within 10 days of receipt of goods. No returns or replacements of accessories or components of any product will be accepted without prior authorisation. 8 GUARANTEE Products manufactured by Securemme Srl are guaranteed for 2 years from invoice date against design, material or manufacture defects which can be reported to Securemme Srl

9 PRICE REVISION CLAUSE The prices in the present price-list may be revised on the delivery of goods due to variations in the cost of parts which have taken place in the meantime. Prices are in EURO. The measures are in mm.

SECUREMME Srl reserves the right to vary product dimensions, characteristics and finishes at any time and without prior notice. All technical drawings and all pictures belong to SECUREMME Srl, any copy, even if only partial is strictly forbidden complying with the law. SECUREMME is a registered company name and trademark.

LEGEND

BK BR CR NK OT ZB ZT F1 F3

= = = = = = = = =

Black Bronzed Chromo Nickel Brass Galvanized white Galvanized yellow Silver aluminium Gold aluminium

F4 F5 F9 OL PV OS CL CS

= = = = = = = =

Bronzed aluminium Black aluminium Aluminium titanium Polish brass PVD brass Satin brass Chromium shiny Chromium satin

DOUBLE WARD MORTICE LOCKS High security double ward locks for frames and gates. Lateral and triple closings.

|CODING EXAMPLE MODEL Mortice locks

KEY MODEL

N. KEYS

B= 0CVBXNISBOZ C= 0CVCXNISBOZ

2= 3= 5=

FINISHING

KEY ENTRANCE

ZB=

40 45 50 60 70 90

XX A

bolt only, no latch U=

galvanized white OT=

universal with reversible latch

2001

KIND OF LOCK

HAND

CR=

brassed chromo

double ward 6 gorges with reversible key

Code

Entrance

Closing

Turns

Stroke

2001XZB50XXAB2 2001XZB60XXAB2 2001XZB70XXAB2

50 60 70

1 1 1

2 4 4

20 40 40

15 15 15

2 2 4 4

20 20 40 40

15 15 15 15

2 4 4

20 40 40

15 15 15

2 4 4

20+20 40+20 40+20

15 15 15

SUPPLY: 1 striking plate CP2001XZB e 2 escutcheons 4501XZB

2003XZB50XXAB2 2003XZB55XXAB2 2003XZB60XXAB2 2003XZB70XXAB2

50 60 60 70

3 3 3 3

SUPPLY: 1 striking plate CP2001XZB e 2 escutcheons 4501XZB

2011XZB50XXAB2 2011XZB60XXAB2 2011XZB70XXAB2

50 60 70

1 1 1

SUPPLY: 1 striking plate CP2001XZB e 2 escutcheons 4501XZB

2013XZB50XXAB2 2013XZB60XXAB2 2013XZB70XXAB2

50 60 70

3 3 3

SUPPLY: 1 striking plate CP2001XZB e 2 escutcheons 4501XZB

2008UZB70XXAB3 2008UZB90XXAB3

70 90

3 3

4 4

40+16 40+16

15 15

70 90

1 1

4 4

40 40

15 15

40 50 60 70

1 1 1 1

2 4 4 4

20 40 40 40

20 20 20 20

SUPPLY: 2 escutcheons 4501XZB

2010UZB70XXAB3 2010UZB90XXAB3 SUPPLY: 2 escutcheons 4501XZB

2000XZB40XXAB3 2000XZB50XXAB3 2000XZB60XXAB3 2000XZB70XXAB3

SUPPLY: 1 striking plate CP2000XZB e 2 escutcheons 4921KF3

B=68 C=78

|2 keys |3 keys |5 keys

DOUBLE WARD MORTICE LOCKS Code

Entrance

Closing

Turns

Stroke

2020XOT60XXAB3 2020XOT60XXAB5 2020XCR60XXAB3 2020XCR60XXAB5

60 60 60 60

1 1 1 1

4 4 4 4

40 40 40 40

15 15 15 15

2 2 2 2 2

20 20 20 20 20

20 15 15 15 15

SUPPLY: 1 striking plate CP2020XOT/CP2020XCR e 2 escutcheons 4921KF3/4921KF1

2024XCR40XXAB5 2025XOT40XXAB3 2025XOT40XXAB5 2025XCR40XXAB3 2025XCR40XXAB5

40 40 40 40 40

1 1 1 1 1

2024 = 2025 = 2028XCR50XXAB5 2028XOT50XXAB5

| frontal and striking plate length 180 mm | frontal and striking plate length 240 mm

50 50

1 1

2 2

20 20

SUPPLY: 1 striking plate CP2025XOT/CP2020XCR e 2 escutcheons 4921KF3/4921KF1

2029XCR60XXAC3 2029XCR60XXAC5

60 60

1 1

2 2

20 20

20+20

40+20

SUPPLY: 2 escutcheons 4521KF1

2017UOT45XXAC5

SUPPLY: 1 striking plate CP2017XZB e 2 escutcheons 4921KF1

2018UZB45XXAC5

SUPPLY: 1 striking plate CP2017XZB e 2 escutcheons 4921KF1

2021UZB60XXAC5

SUPPLY: 1 striking plate CP2017XZB e 2 escutcheons 4921KF1

2022UZB60XXAC5

SUPPLY: 1 striking plate CP2017XZB e 2 escutcheons 4921KF1

DOUBLE WARD TIGHT LOCKS FOR METAL DOORS Double ward TIGHT locks that can save room as well as guarantee security. Hook-bolt driven by handle. Lock of the handle by double ward key with 2 turns, galvanized finishing.

|CODING EXAMPLE MODEL Locks for metal doors

2101

HAND

FINISHING

KEY ENTRANCE

FRONTAL WIDTH KIND OF LOCK

ZB=

25 30 35

no hand

galvanized white

KEY MODEL

N. KEYS

B= 0CVBXNISBOZ

double ward 6 gorges with reversible key

B=68

Code

Entrance

Closing

Turns

Stroke

2101XZB2525AB2 2101XZB3025AB2 2101XZB3525AB2

25 30 35

1 1 1

2 2 2

25 25 25

15 15 15

2102XZB2525AB2 2102XZB3025AB2 2102XZB3525AB2

25 30 35

2 2 2

23 23 23

15 15 15

2103XZB2525AB2 2103XZB3025AB2 2103XZB3525AB2

25 30 35

3 3 3

2 2 2

23+25 23+25 23+25

15 15 15

5200XBK25XX Handle with key-hole escutcheon in black nylon with no visible screws, plastic support and handle square 8x25 mm.

5201XBK25XX Handle with key-hole escutcheon in black nylon with screws, plastic support and handle square 8x25 mm. Double ward key entrance. Interspace 85 mm. 5202XBK25XX Handle with key-hole escutcheon in black nylon with screws, plastic support and handle square 8x25 mm. Cylinder key entrance. Interspace 85 mm. 5210XBK25XX Swinging handle Loretta from zamak. Black finishing. Expansion square 8x25 mm. Size only 10 mm. | Lock can be supplied in groups with the same key code (KA execution) | Add final “KA” to compose the article. Es. 2101XZB2525AB2KA

|2 keys

CYLINDER EXTENSION LOCKS FOR METAL DOORS

Line of locks for European cylinder EXTENSION metal doors. Bolt and gear rods mechanism driven by handle square. Lock of the handle by European cylinder key. The name EXTENSION chosen to point out the rods stroke of 30 mm, the longest on the market. Entrance 25, 30 and 35 mm. Fixing of rods M8 or quick coupling of rods. Strong and reliable line interchangeable with the ones in commerce but with a longer stroke of the rods and the relevant high security.

|CODING EXAMPLE MODEL Locks for metal doors extension

2151

HAND

FINISHING

KEY ENTRANCE

FRONTAL WIDTH

ZB=

25 30 35

no hand

galvanized white

Code

Entrance

Closing

Turns

Stroke

2151XZB2525 2151XZB3025 2151XZB3525

25 30 35

1 1 1

28 28 28

15 15 15

2152XZB2525 2152XZB3025 2152XZB3525

25 30 35

2 2 2

1 1 1

30 30 30

15 15 15

2157XZB2525 2157XZB3025 2157XZB3525

25 30 35

2 2 2

1 1 1

30 30 30

15 15 15

2153XZB2525 2153XZB3025 2153XZB3525

25 30 35

3 3 3

1 1 1

28+30 28+30 28+30

15 15 15

2158XZB2525 2158XZB3025 2158XZB3525

25 30 35

3 3 3

1 1 1

28+30 28+30 28+30

15 15 15

2161XZB2525 2161XZB3025 2161XZB3525

25 30 35

1 1 1

28 28 28

15 15 15

2163XZB2525 2163XZB3025 2163XZB3525

25 30 35

3 3 3

1 1 1

28+30 28+30 28+30

15 15 15

2168XZB2525 2168XZB3025 2168XZB3525

25 30 35

3 3 3

1 1 1

28+30 28+30 28+30

15 15 15

COUPLING M8

QUICK COUPLING FOR RODS

COUPLING M8

QUICK COUPLING FOR RODS

COUPLING M8

QUICK COUPLING FOR RODS

DOUBLE WARD LOCKS FOR ROLLING SHUTTERS AND BALANCING DOORS Double ward lock for rolling shutters and for balancing door. Fixing system interchangeable with the ones in commerce. In central, right and left version. Right and left couple key alike (KA). Available with straight or bended bolt.

|CODING EXAMPLE MODEL Locks for rolling shutters and for balancing doors

HAND

FINISHING

RODS PROJECTION H. KEY GUIDE

KIND OF LOCK

KEY MODEL

N. KEYS

ZB=

45 20

B= 0CVBXNISBOZ

2 3

S= D=

2200

no hand

galvanized white

left

08= 8 16= 16

double ward 6 gorges with reversible key

right

Code

Hand

Closing

Turns

2200XZB4508AB2

2200XZB4516AB2

2205XZB4508AB2

B=68

Bolt Straight

6-30 6-30

Straight 2

6-30 Bended

2205XZB4516AB2

4-20 Bended

2230XZB4508AB3

DX-SX

2+2

2230XZB4516AB3

DX-SX

2+2

2235XZB4508AB3

DX-SX

Straight

3-15 2-10

Straight 2

3-15

2+2 Bended

2235XZB4516AB3

DX-SX

2-10

2+2 Bended

2210SZB4508AB2

2215SZB4508AB2

2210DZB4508AB2

2215DZB4508AB2

2240XZB2008AB2

2250XZB4508AB2

Straight

6-30 6-30

Bended

Straight

6-30 6-30

Bended

6-30 Straight

2+2

Straight

3-15

| Lock can be supplied in groups with the same key code (KA execution) | Add final “KA” to compose the article. Es. 2200XZB4508AB2KA

CYLINDER LOCKS FOR ROLLING SHUTTERS AND BALANCING DOORS Cylinder locks for rolling shutters and for balancing doors. Fixing system interchangeable with the ones in commrce. Available in central, right, left version. Right and left couple with same key code (KA). Available with straight or bended bolt.

|CODING EXAMPLE MODEL

HAND

FINISHING

RODS PROJECTION

H. KEY GUIDE

ZB=

45 20

08= 8

2 3

S= D=

Cylinder locks for rolling shutters and for balancing doors

2260

no hand | left | right

galvanized white

Code

Hand

Closing

Turns

2260XZB4508XX2

2275SZB4508XX2

2275DZB4508XX2

2280XZB4508XX3

DX-SX

2+2

2285XZB4508XX3

DX-SX

2+2

2290XZB2008XX3

2291XZB2070

0C22XNISBOZ

N. KEYS

Bolt Straight

Bended

Straight Bended

Straight

12 12

Blank key for cylinder rolling shutter and balancing door locks

| Lock can be supplied in groups with the same key code (KA execution) | Add final “KA” to compose the article.

| DOUBLE WARD TYPE LOCKS TO APPLY High security double ward locks to apply. Chromed steel bolt 10x60 mm.

|CODING EXAMPLE MODEL Locks to apply

HAND

FINISHING

KEY ENTRANCE

MA=

2304

right

brown

KIND OF LOCK

KEY MODEL

N. KEYS

F= 0CAFXNISBOZ

left

double ward 6 gorges with reversible key

|3 keys

F=110

Code

Entrance

Closing

Turns

Stroke

2304DMA50XXAF3 2304SMA50XXAF3

50 50

1 1

6 6

72 72

5 5

2304DMA50XXAF3

2306DMA50XXAF3 2306SMA50XXAF3

50 50

2 2

6 6

72 72

1 1

2306DMA50XXAF3

LITTLE SAFES AND SECURITY CABINET FOR GUNS Lateral double ward locks with 6 levers. Available with pistons Ø 10 mm or with bolt.

|CODING EXAMPLE MODEL Little safes

2311

HAND

FINISHING

KEY OUTPUT

KEY-GUIDE

KIND OF LOCK

KEY MODEL

N. KEYS

ZB=

01=

GC=

C= 0CVCXNISBOZ

right

galvanized white

left

key output on 2nd turn only 02=

with key-guide XX=

key output 0 and on 2nd turn

safe 6 gorges

C=78

without key-guide

Code

Gorges

Closing

Stroke

System

2311SZB01GCBC2 2311SZB01XXBC2 2311SZB02GCBC2 2311SZB02XXBC2

6 6 6 6

1 1 1 1

20 20 20 20

CH CH CH CH

84x79x17 84x79x17 84x79x17 84x79x17

50 50 50 50 50

2313DZB02XXBC2 2313SZB02XXBC2

6 6

1 1

20 20

CH CH

84x79x17 84x79x17

50 50

2380SZB01GCBC2

2381SZB01GCBC2

2382SZT01XXBC2

2390SZB01GCBC2

20+14

2391SZB01GCBC2

20+14

* CH =

|2 keys

Measures

| KEY

| SAFE LOCKS 6/8 LEVERS Lateral locks, three locking points, 6 or 8 asymmetrical levers with 2 double ward keys not extractable when safe is open. Bi-frontal key code with revolving bolts in chromed steel Ø 22 mm.

|CODING EXAMPLE MODEL Safe locs

HAND

FINISHING

RO= GR= ZB=

left

N. KNOBS

|red |grey

XX 03= 3

KIND OF LOCK

KEY MODEL

N. KEYS

C= 0CVCXNISBOZ 8= 0CF8XNISBOZ

galvanized

safe 6 gorges safe 8 gorges

C=78 8=79

2800

Code

Gorges

Closing

Stroke

System

2800SROXXXXBC2 2803SROXXXXBC2

6 6

1 1

20 20

CH CH

130x84x26 160x84x26

2810SROXXXXF82 2830SROXXXXF82

8 8

1 1

20 20

CH CH

150x100x38 210x100x38

2822SROXXXXF82

CH+CO

210x115x38

2840SROXXXXF82

20+20

270x160x38

2842SROXXXXF82

20+20

CH+CO

270x160x38

2850SR0XXXXF82

340X230X38

2852SR0XXXXF82

CH+CO

340x230x38

* CH = 12

| KEY CH+CO =

| KEY+COMBINATOR

Measures

|2 keys

| SAFE LOCKS 6/8 LEVERS

Code

Gorges

Closing

Stroke

System

2860SROXXXXF82

360X310X38

2862SROXXXXF82

CH+CO

360x310x38

2870SROXXXXF82

300x370x38

2872SROXXXXF82

CH+CO

300x370x38

2880SROXXXXF82

300x490x38

2312SZB03XX

Measures

Combinator with 3 knobs and 20 positions each

PS2810XNI22XX

PS2810XNI22XX Revolving bolt piston Ø 22x30 mm for frontal bolts

PS2840XNI22XX Revolving bolt piston Ø 22x30 mm for lateral rods

* CH =

| KEY CH+CO =

| KEY+COMBINATOR

| SAFE LOCKS 6/8 LEVERS Gorges

Closing

Stroke

System

2815SGRXXXXF82 2835SGRXXXXF82

8 8

1 1

20 20

CH CH

150X100X38 210X100X38

2845SGRXXXXF82

262X160X38

2847SGRXXXXF82

CH+CO

262X160X38

2855SGRXXXXF82

310X210X38

2857SGRXXXXF82

CH+CO

310X210X38

2865SGRXXXXF82

185X335X38

2875SGRXXXXF82

295X450X38

2877SGRXXXXF82

CH+CO

295X450X38

* CH = 14

Code

| KEY CH+CO =

| KEY+COMBINATOR

Measures

| ELECTRONIC SAFE LOCKS Electronic digital combination lock system. Motor-driven movement. 1 internal 9 V alkaline battery-operated, possibility of emergency electric supply. User code from 4 up to 10 digits. Membrane alphanumeric keyboard. On request upper Master Hotel code. Chromed steel rotary bolts Ø 22 mm.

|CODING EXAMPLE MODEL

HAND S=

Electronic safe locks

2935

FINISHING GR=

|left

Code

Closing

Stroke

System

2935SGR

205x100x38

2945SGR

16+16

260x160x38

2955SGR

16+16

310x210x38

2965SGR

16+16

185x335x38

2975SGR

16+16

295x450x38

Measures

11,5

Little nylon handle for electronic safe Ø 66 mm

5299XBK

|grey

TA2935XBKXXXX

PP2935XBKXXXX

* EL =

Keyboard for electronic safe

Battery holder for electronic safe lock

| ELECTRONIC

SAFETY DOORS LOCKS LINE 25

Line 25 universal for safety doors with double ward or european cylinder interchangeable heart. Tested in class 7 UNI EN 12209 arranged with antidrilling plate. All hearts are always interchangeable even after door installation. All hearts of this line are interchangeable (site heart, double ward, easy master and cylinder heart). This allows the personalisation of the lock at any time according to each needs. Moreover in case of keys loss or burglary, the replacement of the heart in the lock is possible by simple and safe procedure without the removal of internal panel; just arrange for a gap on the internal side, remove handle, escutcheons and inserts and then proceed with the heart change.

25K

250

Universal double ward heart with 4 turns, bolts stroke 40 mm, 2 independent levers, right or left hand with 1 site key KA. The main advantage of this heart is the use of the same key for all locks in site. Then when workings are over, the site heart will be replaced by double ward heart 25S or European cylinder heart 25C.

25M EASY MASTER 251 Interchangeable double ward heart EASY MASTER. 4 turns, bolts stroke 40 mm, 6 independent levers to combine with locks art. 2500, 2510, 2530, 2540. 1 site key that can open more locks, 3 definitive keys in sealed bag to activate when workings are over by simple and quick operation. The site key is not operative anymore after the activation of the definitive keys. This procedure is possible without the replacement of the double ward heart of the lock.

25S SECURMAP 253

Definitive double ward heart with 4 turns, bolts stroke 40 mm, 6 independent levers. (See features page 17)

25C European cylinder heart. Interchangeable European cylinder heart with 4 turns, bolts stroke 40 mm.

254

European cylinder heart Securtina. 4 turns, bolts stroke 40 mm. Cylinder blocking in case of forced extraction. (See features page 22)

| KEYS MODEL

SERVICE KEY (T) It activates the half turn and the first 2 turns and is different for each lock. Example: you can leave this key to cleaning woman. When you close the door on 4 turns by ownerâ&#x20AC;&#x2122;s key, the service one cannot open. Close the lock by ownerâ&#x20AC;&#x2122;s key on 2 turns only to let the service key still open.

SAFETY DOORS LOCKS LINE 25

The continuous research for new solutions, the decision to be completely Made In Italy and the trust in the security of a double ward registered key with protected duplication, make Securemme to think of a “new conception of security SECURMAP”. SECURMAP, the new lock of latest generation for high security armoured doors that prevents the most sophisticated manipulation systems

SECURMAP is protected by patents: Registered key with protected duplication, antipicking swinging levers and mentonnet with special profile, new anti-manipulation block lever. SECURMAP is based on the use of new levers and mentonnet with special profile that prevent the manipulation with picklocks (fig. A), the addition of steel sphere in the mechanism that prevents the breaking by drilling (fig. B), the tooth with special reduced section avoids the attempt of forcing by improper key (fig. C), resistance against the axial push over 8 KN (fig. D).

SECURMAP with the new double ward registered key and the property card that guarantees the protected duplication, safeguards you from illegal key copies. Key duplications can be arranged exclusively by authorized dealers “Team Securemme”.

On the card you can find the code and number of keys supplied. The “Team Securemme” will complete the card with the date and the number of copies made. In this you are always update about the number of keys in circulation.

| CODING EXAMPLE 2503DCR0028 MODEL

250

250 251 253 254

0= 1=

| See photo page 16

FIXING PREDISPOSITION

| Planar with 4 hub seat

Lateral arranged holes screwed M6

3= Mortice with frontal arranged planar and lateral

OPENING DOOR HAND

D= S= R= L=

| push right | push left | pull right | pull left

FINISHING BOLTS

+ 00 +

| chromo

CR=

PROJECTION BOLTS 03= 00= 13= 06= 43= S3=

STANDARD : projection of bolts and latch 3 mm no projection of bolts and latch for frontal model

| projection of bolts and latch 13 mm | projection of bolts and latch 6 mm | projection of bolts and latch 43 mm

projection of bolts 3 mm / projection of latch 6 mm

INTERSPACE BOLTS

2503DCR0028

28= 28 37= 37

Stop at this step for lock without any heart assembled. For further requests go on with code combination.

K M HEART MODEL

K= M= S= C= T=

KA site heart assembled Easy Master | Easy Master Securmap | Securmap | Arranged for cylinder heart Securtina | Securtina

C T

KEY LENGTH FOR DOUBLE WARD HEART

4= 5= 6=

(00CC4XNISBOZ) 40 (00CC5XNISBOZ) 50 (00CC6XNISBOZ) 60

| Stem 40 mm | Stem 50 mm | Stem 60 mm

4=40 5=50 6=60

KEY FOR DOUBLE WARD HEART

6= 7=

| 3 keys +1 key T | 5 keys +1 key T | SINGLE PACKAGING IN CARTOON BOX= 1â&#x201A;Ź

2503DCR0028S46 Combine antidrilling plate to get resistance grade 7 from rule UNI EN 12209 (see accessories on page 54)

SAFETY DOORS LOCKS LINE 25 LIST FOR MOST COMMON ARTICLES FOR LOCK WITH SITE HEART INSTALLED

Code

Model

2500DCR0328K1

250

2500SCR0328K1 2500DCR0337K1 2500SCR0337K1

Fixing

Hand DX|Right

planar

250

Interspace

28 28

chromo

SX|Left

planar

Projection

chromo

DX|Right

planar

250

chromo

SX|Left

planar

250

Finishing

chromo

Heart 5 site

site

| INDUSTRIAL PACKING | SINGLE PACKAGING IN CARTOON BOX= 1€

LIST FOR MOST COMMON ARTICLES FOR LOCK WITHOUT HEART INSTALLED (order heart apart)

Code

Model

2500DCR0328

250

2500SCR0328

250

2500DCR0337

250

2500SCR0337

250

Fixing

Hand

Finishing

DX|Right

planar

chromo

SX|Left

planar

chromo

DX|Right

planar

chromo

SX|Left

planar

chromo

Projection

Interspace

| INDUSTRIAL PACKING | SINGLE PACKAGING IN CARTOON BOX= 1€

LIST FOR MOST COMMON ARTICLES FOR LOCK WITH SECURMAP HEART INSTALLED

Code

Model

2500DCR0328S46

250

2500SCR0328S46

250

2500DCR0337S46

250

2500SCR0337S46

250

Fixing planar planar planar planar

Hand DX|Right SX|Left DX|Right SX|Left

Finishing chromo chromo chromo chromo

Projection Interspace

Heart

Stem key N. Keys

Securmap

3+1T

Securmap

3+1T

Securmap

3+1T

Securmap

3+1T

Securmap

3+1T

Securmap

3+1T

Securmap

3+1T

Securmap

3+1T

| INDUSTRIAL PACKING | SINGLE PACKAGING IN CARTOON BOX= 1€

2503DCR0328S46

250

2503SCR0328S46

250

2503DCR0337S46

250

2503SCR0337S46

250

planar planar planar planar

DX|Right SX|Left DX|Right SX|Left

chromo chromo chromo chromo

| SINGLE PACKAGING IN CARTOON BOX= 1€

SAFETY DOORS LOCKS LINE 25M Lock line 25M reversible, double ward variable mechanism. 6 independent levers. Reversible latch Ø 20 mm driven by handle square 8 mm. When locked the handle doesn't unhook the latch. Tested in class 7 UNI EN 12209 arranged with antidrilling plate.

240

241

243

244

SECURMAP is protected by patents: Registered key, antipicking swinging levers and mentonnet with special profile, new anti-manipulation block lever. SECURMAP is based on the use of new levers and mentonnet with special profile that prevent the manipulation with picklocks (fig. A), the addition of steel sphere in the mechanism that prevents the breaking by drilling (fig. B), the tooth with special reduced section avoids the attempt of forcing by improper key (fig. C), resistance against the axial push over 8 KN (fig. D).

Code

Model

2400UCR0328S46 2400UCR0337S46 2403UCR0028S46 2403UCR0037S46 2430UCR0328S46 2430UCR0337S46 2433UCR0028S46 2433UCR0037S46

240 240 240 240 243 243 243 243

Hand

Finishing

Projection Interspace

Heart

Stem key N. Keys

U U U U U U U U

3 3 3 3 3 3 3 3

Securmap Securmap Securmap Securmap Securmap Securmap Securmap Securmap

40 40 40 40 40 40 40 40

Locks in industrial packing except frontal model supplied in single cartoon box

28 37 28 37 28 37 28 37

3+1T 3+1T 3+1T 3+1T 3+1T 3+1T 3+1T 3+1T

5 5 5 5 5 5 5 5

| CODING EXAMPLE 2403UCR0028S46 MODEL

240

240 241 243 244

0= 1=

| See photo page 20

FIXING PREDISPOSITION

| Planar with 4 hub seat

Lateral arranged holes screwed M6 Mortice with frontal arranged planar and lateral

OPENING DOOR HAND

universal reversible right/left

FINISHING BOLTS

| chromo

CR=

+ PROJECTION BOLTS

03= 00= 13= 06= 43= S3=

STANDARD : projection of bolts and latch 3 mm no projection of bolts and latch for frontal model

| projection of bolts and latch 13 mm | projection of bolts and latch 6 mm | projection of bolts and latch 43 mm

projection of bolts 3 mm / projection of latch 6 mm

INTERSPACE BOLTS

28= 28 37= 37

HEART MODEL

Securmap | Securmap

4= 5= 6=

(00CC4XNISBOZ) 40 (00CC5XNISBOZ) 50 (00CC6XNISBOZ) 60

+ KEY LENGTH FOR DOUBLE WARD HEART

| Stem 40 mm | Stem 50 mm | Stem 60 mm

4=40 5=50 6=60

KEY FOR DOUBLE WARD HEART

= 2403UCR0028S46

6= 7=

| 3 keys +1 key T | 5 keys +1 key T | SINGLE PACKING IN CARTOON BOX= 1â&#x201A;Ź

Combine antidrilling plate to get resistance grade 7 from rule UNI EN 12209 (see accessories on page 54)

SAFETY DOORS LOCKS LINE 26 Locks line 26 with European cylinder mechanism. Reversible latch Ă&#x2DC; 20 mm driven by key and handle square 8 mm. Tested in class 7 UNI EN 12209 arranged with antidrilling plate.

261

260

263

264

ON REQUEST: SPECIAL SECURTINA BLOCK The device is activated only in case of forced extraction or break of the cylinder. In this way thieves cannot open the lock and relevant bolts.The lock remains stuck thus avoiding intrusion into the apartment.

LISTE FOR MOST COMMON ARTICLES FOR LINE 26 REVERSIBLE (locks supplied left)

Code

Model

2600UCR0328CXX 2600UCR0337CXX 2600UCR0328TXX 2600UCR0337TXX 2603UCR0028CXX 2603UCR0037CXX 2610XCR0328CXX 2630UCR0328CXX 2630UCR0337CXX 2633UCR0028CXX 2640UCR0328CXX 2640UCR0337CXX 2643UCR0037CXX 2643UCR0028CXX

260 260 260 260 260 260 261 263 263 263 264 264 264 264

Fixing

Locks in industrial packing except frontal model supplied in single cartoon box

Finishing

Projection

Interspace

3 3 3 3 3 3 3 3 3 3 3 3 3 3

28 37 28 37 28 37 28 28 37 28 28 37 37 28

Heart

Securtina Securtina

5 5 5 5 5 5 5 5 5 5 5 5 5 5

| CODING EXAMPLE 2603UCR0028CXX MODEL

260= 50,00

260 261 263 264

| See photo page 22

FIXING PREDISPOSITION

3= 4,00

0= 1=

| Planar with 4 hub seat

Lateral arranged holes screwed M6

3= Mortice with frontal arranged planar and lateral

OPENING DOOR HAND

U= 0

universal reversible right/left

Standard supply of lock left-hand

FINISHING BOLTS

CR= 0

| chromo

CR=

+ PROJECTION BOLTS

00= 0

03= 00= 13= 06= 43= S3=

STANDARD : projection of bolts and latch 3 mm no projection of bolts and latch for frontal model

| projection of bolts and latch 13 mm | projection of bolts and latch 6 mm | projection of bolts and latch 43 mm

projection of bolts 3 mm / projection of latch 6 mm

INTERSPACE BOLTS

28= 0

28= 28 37= 37

HEART MODEL

CXX= 0

| Arranged for cylinder heart CXX= TXX= Securtina | Securtina | SINGLE PACKAGING IN CARTOON BOX= 1â&#x201A;Ź

2603UCR0028CXX Combine antidrilling plate to get resistance grade 7 from rule UNI EN 12209 (see accessories on page 54)

| REINFORCED TOTAL LOCKS Reinforced total lock with double ward variable heart, 6 independent levers, 4 turns and bolts stroke 40 mm. Enter key 63 mm. Endowed with upper and lower switches, 1 limiting device and rods. Completed article to reduce assembly time.

|CODING EXAMPLE MODEL Total locks= 650 653 660 663

FIXING

HAND

CLOSING POINTS

09 10 11

planar

left right

* example: * see 10 CLOSING POINTS

FEATURES

INTERSPACE KEY TYPE

KEY MODEL

N. KEYS

28 37

S= Securmap Securmap C= Cylinder

4= 0CC4XNISB0Z

Projection latch and bolts from box 03=

3 keys + 1 key T

4=85

Standard: bolts and latch + 3 mm

650

Code

Interspace

Hand

Measures

6500D090337S46 6500S090337S46 6500D100328S46 6500S100328S46

37 37 28 28

DX SX DX SX

138x1700 138x1700 138x1700 138x1700

60 60 60 60

1 2

* EXAMPLE: 10 CLOSING POINTS

4 5 6 7 8

9 10

Code

Interspace

Hand

Measures

6530D100337S46 6530S100337S46 6530D110328S46 6530S110328S46

37 37 28 28

DX SX DX SX

138x1700 138x1700 138x1700 138x1700

60 60 60 60

| REINFORCED TOTAL LOCKS Reinforced total lock with European cylinder, 3 turns, bolts stroke 30 mm. Enter key 63 mm. Endowed with upper and lower switches, 1 limiting device and rods. Completed article endowed with lock, limiting device, switches and rods to reduce assembly time.

Code

Interspace

Hand

Measures

6600D090337CXX 6600S090337CXX 6600D100328CXX 6600S100328CXX

37 37 28 28

DX SX DX SX

138x1700 138x1700 138x1700 138x1700

60 60 60 60

For further information contact our offices.

Code

Interspace

Hand

Measures

6630D100337CXX 6630S100337CXX 6630D110328CXX 6630S110328CXX

37 37 28 28

DX SX DX SX

138x1700 138x1700 138x1700 138x1700

60 60 60 60

For further information contact our offices.

SAFETY DOORS LOCKS LINE 27 RESTYLING

Electromechanical locks with both electronic and mechanical operation, door opening allowed with or without electrical supply, easy application on standard safety doors. Opening by keycode on numbered keyboard, trasponder, European cylinder key and remote control which allows opening by high-tech systems. (Through entry-phone, computer, buttons or mobile phone). For operation through mobile phone you need to order the GSM modem apart (art. SH2700MD). All electronic components are on the heart lock. In case of not good working, easy replacement of the heart as in mechanical locks without removing the internal panel. Internal open/close keyboard in escutcheon of the door. Main electronic card that allows different opening systems, installed outside the door, direct supply from 85 V to 264 V.

|CODING EXAMPLE MODEL

Locks line 27 electromechanical 270 273

FIXING

HAND

INISHING

CR=

0= 3=

lateral planar

left right

FEATURES Projection latch and bolts from box 00=

chromo

INTERSPACE KEY TYPE

N. MASTER

N. TRASPONDER

28 37

0C27XXXCARD

0C27XXXKYF

Cylinder

no projection of bolts and latch 3 mm 03=

frontal

Standard: bolts and latch + 3 mm

270

Code 2701DCR0328C13 2701SCR0328C13 2701DCR0337C13 2701SCR0337C13 2700DCR0328C13 2700SCR0328C13 2700DCR0337C13 2700SCR0337C13 2703DCR0028C13 2703SCR0028C13 2703DCR0037C13 2703SCR0037C13 2731DCR0328C13 2731SCR0328C13 2731DCR0337C13 2731SCR0337C13 2730DCR0328C13 2730SCR0328C13 2730DCR0337C13 2730SCR0337C13 2733DCR0028C13 2733SCR0028C13 2733DCR0037C13 2733SCR0037C13

Description

Turns

Hand

DX SX DX SX DX SX DX SX DX SX DX SX

Lateral, enter 63, interspace 28 mm

3 Lateral, enter 63, interspace 37 mm

3 Planar, enter 63, interspace 28 mm

3 Planar, enter 63, interspace 37 mm

3 Mortice, enter 63, interspace 28 mm

3 Mortice, enter 63, interspace 37 mm

3 Lateral, enter 63, interspace 28 mm

3 Lateral, enter 63, interspace 37 mm

3 Planar, enter 63, interspace 28 mm

3 Planar, enter 63, interspace 37 mm

3 Mortice, enter 63, interspace 28 mm

3 Mortice, enter 63, interspace 37 mm

DX SX DX SX DX SX DX SX DX SX DX SX

SH2700MD Modem GSM for opening by mobile phone and distance remote control

27EXSZB

Cuore a cilindro dx per elettromeccanica

27EXDZB Cuore a cilindro sx per elettromeccanica * * Standard supply of the locks: 3 pieces art. 2700T + 1 piece art. 2700C master, electronic card, internal / external keyboard, junction box and cylinder gear

SPARE PARTS AND ACCESSORIES FOR LINE 27 RESTYLING Code 3200QCS30301X5 3201QCS30301X5 3200QCS30351X5 3201QCS30351X5 3200QCS30401X5 3201QCS30401X5 3200QCS30501X5 3201QCS30501X5 0C27XXXCARD

Description European right cylinder 60 30-30 suitable for knob European left cylinder 60 30-30 suitable for knob European right cylinder 65 30-35 suitable for knob European left cylinder 65 30-35 suitable for knob

Finishing CS CS CS CS CS

European right cylinder 70 30-40 suitable for knob

CS European left cylinder 70 30-40 suitable for knob

CS European right cylinder 80 30-50 suitable for knob

CS European left cylinder 80 30-50 suitable for knob

0C27XXXKYF

Credit card trasponder in addition to standard supply

0C27XXXCARD

0C27XXXKYF Key-ring trasponder in addition to standard supply

PV2700XZBXXXX Junction box

KIT 2700 KIT2700OL KIT2700F4 KIT2700CS KIT2700CL KIT2700F1 KIT2700F3

OL F4 CS CL F1 F3 Kit made up of: INSIDE - Long escutcheon with open/close keyboard, handle, insert, 1 half moon for knob cylinder and exspansion square (line 5110). OUTSIDE - escutcheon for external keyboard, kit protector and middle door knob kit.

OUTSIDE

INSIDE

OUTSIDE

INSIDE

For cylinder choose among articles above. The price of kit does not include the cylinder. The good working of the lock is guaranteed only with Securemme cylinders.

KIT 2730 KIT2730OL KIT2730F4 KIT2730CS KIT2730CL KIT2730F1 KIT2730F3

OL F4 CS CL F1 F3 Kit made up of: INSIDE - Long escutcheon with open/close keyboard, handle, insert, escutcheon and insert for service cylinder (4300+4015XBK), 2 half moons for knob cylinder and expansion square (line 5110). OUTSIDE - escutcheon for external keyboard, 2 kit protector and middle door knob kit.

For cylinder choose among articles above. The price of kit does not include the cylinder. The good working of the lock is guaranteed only with Securemme cylinders.

| CYLINDERS LINE KY Line KY 5 pins, verical standard key, 3 brass nickeled keys insealed beg.

|CODING EXAMPLE LINE Cylinder KY 3000= standard 3090= oval

3000

MODEL C= M= P= Q=

FINISHING | key

| half cylinder | with knob | knob predisposition

OL= CS=

KA EXECUTIONS

DEFINITIVE KEYS 3

30 10 X

XX K5

polished brass

KA|10 pcs. KA KA|50 pcs. KA

K1= 10 K5= 50

satin chromo

3000MCS2510XX3 3000MCS2510XX3XXK5 3000MCS3010XX3 3000MCS3010XX3XXK5 3000MCS3510XX3 3000MCS3510XX3XXK5 3000MCS4010XX3 3000MCS4010XX3XXK5 3000MCS4510XX3 3000MCS5010XX3 3000MCS5510XX3 3000MCS6010XX3

35 35 40 40 45 45 50 50 55 60 65 70

25 25 30 30 35 35 40 40 45 50 55 60

10 10 10 10 10 10 10 10 10 10 10 10

10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50

3000COL3030XX3 3000COL3035XX3 3000COL3040XX3 3000COL3535XX3 3000COL3045XX3 3000COL3540XX3 3000COL3050XX3 3000COL3545XX3 3000COL4040XX3 3000COL3055XX3 3000COL3550XX3 3000COL4045XX3 3000COL3060XX3 3000COL3555XX3 3000COL4050XX3 3000COL4545XX3 3000COL3560XX3 3000COL4055XX3 3000COL4550XX3 3000COL3070XX3 3000COL4060XX3 3000COL5050XX3 -

3000CCS3030XX3 3000CCS3035XX3 3000CCS3040XX3 3000CCS3535XX3 3000CCS3045XX3 3000CCS3540XX3 3000CCS3050XX3 3000CCS3545XX3 3000CCS4040XX3 3000CCS3055XX3 3000CCS3550XX3 3000CCS4045XX3 3000CCS3060XX3 3000CCS3555XX3 3000CCS4050XX3 3000CCS4545XX3 3000CCS3560XX3 3000CCS4055XX3 3000CCS4550XX3 3000CCS3070XX3 3000CCS4060XX3 3000CCS5050XX3 3000CCS4070XX3 3000CCS5060XX3 3000CCS6060XX3

60 65 70 70 75 75 80 80 80 85 85 85 90 90 90 90 95 95 95 100 100 100 110 110 120

30 30 30 35 30 35 30 35 40 30 35 40 30 35 40 45 35 40 45 30 40 50 40 50 60

30 35 40 35 45 40 50 45 40 55 50 45 60 55 50 45 60 55 50 70 60 50 70 60 60

10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50

3000-P 3000-P 3000-P 3000-P 3000-P 3000-P 3000-P 3000-P 3000-P 3000-P 3000-P 3000-P 3000-P 3000-P 3000-P 3KY0-P

3000POL3030XX3 3000POL3530XX3 3000POL4030XX3 3000POL3535XX3 3000POL4530XX3 3000POL4035XX3 3000POL5030XX3 3000POL4535XX3 3000POL4040XX3 3000POL6030XX3 3000POL5535XX3 3000POL5040XX3 3000POL4545XX3 3000POL4050XX3 3000POL6040XX3 3000POL5050XX3

3000PCS3030XX3 3000PCS3530XX3 3000PCS4030XX3 3000PCS3535XX3 3000PCS4530XX3 3000PCS4035XX3 3000PCS5030XX3 3000PCS4535XX3 3000PCS4040XX3 3000PCS6030XX3 3000PCS5535XX3 3000PCS5040XX3 3000PCS4545XX3 3000PCS4050XX3 3000PCS6040XX3 3000PCS5050XX3

60 65 70 70 75 75 80 80 80 90 90 90 90 90 100 100

30 35 40 35 45 40 50 45 40 60 55 50 45 40 60 50

30 30 30 35 30 35 30 35 40 30 35 40 45 50 40 50

10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50

3000-Q 3000-Q 3000-Q 3000-Q 3000-Q

3000QOL3030XX3 3000QOL3035XX3 3000QOL3040XX3 3000QCS3050XX3 3000QOL3050XX3

3000QCS3030XX3 3000QCS3035XX3 3000QCS3040XX3 3000QCS3045XX3 3000QCS3050XX3

60 65 70 75 80

30 30 30 30 30

30 35 40 45 50

10-50 10-50 10-50 10-50 10-50

3090-O 3090-O

3090COL2727XX3 3090COL2733XX3

55 60

27 27

27 33

10-50 10-50

Line

Brass finishing

Chromium satin finishing

3000-M 3000-M 3000-M 3000-M 3000-M 3000-M 3000-M 3000-M 3000-M 3000-M 3000-M 3000-M

3000MOL2510XX3 3000MOL2510XX3XXK5 3000MOL3010XX3 3000MOL3010XX3XXK5 3000MOL3510XX3 3000MOL3510XX3XXK5 3000MOL4010XX3 3000MOL4010XX3XXK5 3000MOL4510XX3 -

3000-C 3000-C 3000-C 3000-C 3000-C 3000-C 3000-C 3000-C 3000-C 3000-C 3000-C 3000-C 3000-C 3000-C 3000-C 3000-C 3000-C 3000-C 3000-C 3000-C 3000-C 3000-C 3000-C 3000-C 3000-C

C B

C B A

B C A

| KA execution (key alike) on request euro 3,00 in addition to cylinder standard cost. | Cylinder for electronic gate, finishing CS art. 300OECS1530XX 19,50 euro.

| CYLINDERS LINE K1 Line K1 6 pins, 1 site key + 3 definitive keys. Cylinder with "SITE KEY SYSTEM" that allows the use of the first key (site key) during workings. Then when workings are over, you will hand to the final owner the keys in sealed bag that by modifying the code will make the site key not operative anymore.

|CODING EXAMPLE LINE

MODEL

3100

C= M= P= Q=

3100

Cylinder K1

B FINISHING | key

| half cylinder | with knob | knob predisposition

OL= CS=

C SITE KEY

KA EXECUTIONS

DEFINITIVE KEYS

1 3

K1= 10 K5= 50

30 10 1

polished brass

KA|10 pcs. KA KA|50 pcs. KA

satin chrome

3100MCS25101X1XXK5 3100MCS30101X1XXK5 -

35 40 40 45 50 60

25 30 30 35 40 50

10 10 10 10 10 10

10-50 10-50 10-50 10-50 10-50 10-50

3100COL30301X3 3100COL30351X3 3100COL30401X3 3100COL35351X3 3100COL30451X3 3100COL35401X3 3100COL30501X3 3100COL35451X3 3100COL40401X3 3100COL30551X3 3100COL35501X3 3100COL40451X3 3100COL30601X3 3100COL35551X3 3100COL40501X3 3100COL45451X3 3100COL35601X3 3100COL40551X3 3100COL45501X3 3100COL30701X3 3100COL40601X3 3100COL50501X3 3100COL30801X3 3100COL40701X3 3100COL50601X3

60 65 70 70 75 75 80 80 80 85 85 85 90 90 90 90 95 95 95 100 100 100 110 110 110

30 30 30 35 30 35 30 35 40 30 35 40 30 35 40 45 35 40 45 30 40 50 30 40 50

30 35 40 35 45 40 50 45 40 55 50 45 60 55 50 45 60 55 50 70 60 50 80 70 60

10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50

3100-P 3100-P 3100-P 3100-P 3100-P 3100-P 3100-P 3100-P 3100-P 3100-P 3100-P 3100-P 3100-P 3100-P 3100-P 3100-P

3100POL30301X3 3100POL35301X3 3100POL40301X3 3100POL35351X3 3100POL45301X3 3100POL40351X3 3100POL50301X3 3100POL45351X3 3100POL40401X3 3100POL60301X3 3100POL55351X3 3100POL50401X3 3100POL45451X3 3100POL40501X3 3100POL60401X3 3100POL50501X3

60 65 70 70 75 75 80 80 80 90 90 90 90 90 100 100

30 35 40 35 45 40 50 45 40 60 55 50 45 40 60 50

30 30 30 35 30 35 30 35 40 30 35 40 45 50 40 50

10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50

3100-Q 3100-Q 3100-Q 3100-Q 3100-Q

3100QOL30301X3 3100QOL30351X3 3100QOL30401X3 3100QOL30451X3 3100QOL30501X3

60 65 70 75 80

30 30 30 30 30

30 35 40 45 50

10-50 10-50 10-50 10-50 10-50

Line

Brass finishing

Chromium satin finishing

3100-M 3100-M 3100-M 3100-M 3100-M 3100-M

3100MOL30101X3XXK1 3100MOL35101X3XXK1 3100MOL40101X3XXK1 3100MOL50101X3XXK1

3100-C 3100-C 3100-C 3100-C 3100-C 3100-C 3100-C 3100-C 3100-C 3100-C 3100-C 3100-C 3100-C 3100-C 3100-C 3100-C 3100-C 3100-C 3100-C 3100-C 3100-C 3100-C 3100-C 3100-C 3100-C

C B

C B A

B C A

| KA execution (key alike) on request euro 5,00 in addition to cylinder standard cost. |Sample execution 8,00 euro.

| CYLINDERS LINE K2 Line K2 10 pins, 1 site key + 5 definitive keys. Cylinder with "SITE KEY SYSTEM" that allows the use of the first key (site key) during workings. Then when workings are over, you will hand to the final owner the keys in sealed bag that by modifying the code will make the site key not operative anymore.

|CODING EXAMPLE LINE Cylinder K2 3200=cam dx 3201=cam sx

MODEL C= M= P= Q= G= E=

FINISHING | key

C SITE KEY

DEFINITIVE KEYS

KA EXECUTIONS

OL=

3 5

25 10 1

XX K1

3200

Line

Brass finishing

Chromium satin finishing

3200-M 3200-M 3200-M 3200-M 3200-M 3200-M 3200-M 3200-M 3200-M 3200-M 3200-M 3200-M 3200-M 3200-M 3200-M 3200-M 3200-M

3200MOL30101X3 3200MOL30101X3XXK1 3200MOL35101X3XXK1 3200MOL35101X3XXK1 3200MOL40101X3 3200MOL40101X3XXK1 -

3200-C 3200-C 3200-C 3200-C 3200-C 3200-C 3200-C 3200-C 3200-C 3200-C 3200-C 3200-C 3200-C 3200-C 3200-C 3200-C 3200-C 3200-C 3200-C 3200-C 3200-C 3200-C 3200-C 3200-C 3200-C 3200-C 3200-C 3200-C 3200-C

3200COL30301X5 3200COL30351X5 3200COL30401X5 3200COL35351X5 3200COL30451X5 3200COL35401X5 3200COL30501X5 3200COL35451X5 3200COL40401X5 3200COL30551X5 3200COL35501X5 3200COL40451X5 3200COL30601X5 3200COL35551X5 3200COL40501X5 3200COL45451X5 3200COL35601X5 3200COL40551X5 3200COL45501X5 3200COL30701X5 3200COL40601X5 3200COL50501X5 3200COL45551X5 3200COL30801X5 3200COL40701X5 3200COL50601X5 3200COL30901X5 3200COL40801X5 3200COL50701X5

3200MCS25101X3 3200MCS25101X3XXK1 3200MCS25101X3XXK5 3200MCS30101X3 3200MCS30101X3XXK1 3200MCS30101X3XXK5 3200MCS35101X3 3200MCS35101X3XXK1 3200MCS35101X3XXK5 3200MCS40101X3 3200MCS40101X3XXK1 3200MCS50101X3 3200MCS50101X3XXK1 3200MCS60101X3 3200MCS60101X3XXK1 3200MCS70101X3 3200MCS70101X3XXK1

35 35 35 40 40 40 45 45 45 50 50 60 60 70 70 80 80

25 25 25 30 30 30 35 35 35 40 40 50 50 60 60 70 70

10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10

10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50

3200CCS30301X5 3200CCS30351X5 3200CCS30401X5 3200CCS35351X5 3200CCS30451X5 3200CCS35401X5 3200CCS30501X5 3200CCS35451X5 3200CCS40401X5 3200CCS30551X5 3200CCS35501X5 3200CCS40451X5 3200CCS30601X5 3200CCS35551X5 3200CCS40501X5 3200CCS45451X5 3200CCS35601X5 3200CCS40551X5 3200CCS45501X5 3200CCS30701X5 3200CCS40601X5 3200CCS50501X5 3200CCS45551X5 3200CCS30801X5 3200CCS40701X5 3200CCS50601X5 3200CCS30901X5 3200CCS40801X5 3200CCS50701X5

60 65 70 70 75 75 80 80 80 85 85 85 90 90 90 90 95 95 95 100 100 100 100 110 110 110 120 120 120

30 30 30 35 30 35 30 35 40 30 35 40 30 35 40 45 35 40 45 30 40 50 45 30 40 50 30 40 50

30 35 40 35 45 40 50 45 40 55 50 45 60 55 50 45 60 55 50 70 60 50 55 80 70 60 90 80 70

10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50

KA execution (key alike) on request euro 5,00 in addition to cylinder standard cost for line C-P-Q. |Sample execution 8,00 euro.

K1= 10 K5= 50

C B

C B A

KA|10 pcs. KA KA|50 pcs. KA

| CYLINDERS LINE K2 A

3200PCS30301X5 3200PCS35301X5 3200PCS40301X5 3200PCS35351X5 3200PCS45301X5 3200PCS40351X5 3200PCS50301X5 3200PCS45351X5 3200PCS40401X5 3200PCS35451X5 3200PCS40451X5 3200PCS60301X5 3200PCS55351X5 3200PCS50401X5 3200PCS45451X5 3200PCS40501X5 3200PCS60401X5 3200PCS50501X5

60 65 70 70 75 75 80 80 80 80 80 90 90 90 90 90 100 100

30 35 40 35 45 40 50 45 40 35 40 60 55 50 45 40 60 50

30 30 30 35 30 35 30 35 40 45 45 30 35 40 45 50 40 50

10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50

3200QOL30301X5 3200QOL30351X5 3200QOL30401X5 3200QOL30451X5 3200QOL30501X5 3200QOL30601X5 3200QOL30701X5

3200QCS30301X5 3200QCS30351X5 3200QCS30401X5 3200QCS30451X5 3200QCS30501X5 3200QCS30601X5 3200QCS30701X5

60 65 70 75 80 90 100

30 30 30 30 30 30 30

30 35 40 45 50 60 70

10-50 10-50 10-50 10-50 10-50 10-50 10-50

3201QCS30301X5 3201QCS30351X5 3201QCS30401X5 3201QCS30501X5

60 65 70 80

30 30 30 30

30 35 40 50

10-50 10-50 10-50 10-50

Line

Brass finishing

Chromium satin finishing

3200-P 3200-P 3200-P 3200-P 3200-P 3200-P 3200-P 3200-P 3200-P 3200-P 3200-P 3200-P 3200-P 3200-P 3200-P 3200-P 3200-P 3200-P

3200POL30301X5 3200POL35301X5 3200POL40301X5 3200POL35351X5 3200POL45301X5 3200POL40351X5 3200POL50301X5 3200POL45351X5 3200POL40401X5 3200POL35451X5 3200POL40451X5 3200POL60301X5 3200POL55351X5 3200POL50401X5 3200POL45451X5 3200POL40501X5 3200POL60401X5 3200POL50501X5

3200-Q 3200-Q 3200-Q 3200-Q 3200-Q 3200-Q 3200-Q 3201-Q 3201-Q 3201-Q 3201-Q

B C A

3201: cylinders with left CAM 30째 for electromechanical left lock line 27 (see page 27)

Line

Description

3200-G C

Possibility of execution cylinder with toothed CAM 10 or 13 teeth. Line key-key. 3,00 euro in addition to standard cost. Set the code as example in the top of page 30.

Line

Code

3200-E

3200ECS1530XX

Description

Cylinder for electronic gate

|Sample execution 8,00 euro.

| KA execution (key alike) on request euro 5,00 in addition to cylinder standard cost.

| CYLINDERS LINE K3

Line K3 6 pins and double key-coding system, 1 site key + 5 silver nickel keys. Cylinder with "SITE KEY SYSTEM" that allows the use of the first key (site key) during workings. Then when workings are over, you will hand to the final owner the keys in sealed bag that by modifying the code will make the site key not operative anymore.

|CODING EXAMPLE LINE

MODEL | key

CS=

3300

C= M= P= Q=

3300

Line

Chromium satin finishing

3300-M 3300-M 3300-M 3300-M 3300-M 3300-M 3300-M

3300-C 3300-C 3300-C 3300-C 3300-C 3300-C 3300-C 3300-C 3300-C 3300-C 3300-C 3300-C 3300-C 3300-C 3300-C 3300-C 3300-C 3300-C 3300-C 3300-C 3300-C 3300-C 3300-C 3300-C 3300-C 3300-C

Cylinder K3

B FINISHING | half cylinder | with knob | knob predisposition

satin chromo

C SITE KEY

DEFINITIVE KEYS

KA EXECUTIONS

3 5

10 1

XX K1

3300MCS30101X3 3300MCS30101X3XXK1 3300MCS35101X3 3300MCS35101X3XXK1 330M0504010C13 3300MCS40101X3XXK1 3300MCS50701X3

40 40 45 45 50 50 60

30 30 35 35 40 40 50

10 10 10 10 10 10 10

10-50 10-50 10-50 10-50 10-50 10-50 10-50

3300CCS30301X5 3300CCS30351X5 3300CCS30401X5 3300CCS35351X5 3300CCS30451X5 3300CCS35401X5 3300CCS30501X5 3300CCS35451X5 3300CCS40401X5 3300CCS30551X5 3300CCS35501X5 3300CCS40451X5 3300CCS30601X5 3300CCS35551X5 3300CCS40501X5 3300CCS45451X5 3300CCS35601X5 3300CCS40551X5 3300CCS45501X5 3300CCS30701X5 3300CCS40601X5 3300CCS50501X5 3300CCS30801X5 3300CCS40701X5 3300CCS50601X5 30030CCS50701X5

60 65 70 70 75 75 80 80 80 85 85 85 90 90 90 90 95 95 95 100 100 100 110 110 110 120

30 30 30 35 30 35 30 35 40 30 35 40 30 35 40 45 35 40 45 30 40 50 30 40 50 50

30 35 40 35 45 40 50 45 40 55 50 45 60 55 50 45 60 55 50 70 60 50 80 70 60 70

10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50 10-50

K1= 10

KA|10 pcs. KA

C B

C B A

KA execution (key alike) on request euro 5,00 for line C-P-Q and groups MK euro 15,00 in addition to cylinder standard cost for line C and euro 10,00 for line M-Q-P . Pass execution 8,00 euro.

| CYLINDERS LINE K3 A

3300PCS30301X5

10-50

3300PCS35301X5

10-50

3300-P

3300PCS40301X5

10-50

3300-P

3300PCS35351X5

10-50

3300-P

3300PCS45301X5

10-50

3300-P

3300PCS40351X5

10-50

3300-P

3300PCS50301X5

10-50

3300-P

3300PCS45351X5

10-50

3300-P

3300PCS40401X5

10-50

3300-P

3300PCS60301X5

10-50

3300-P

3300PCS55351X5

10-50

3300-P

3300PCS50401X5

10-50

3300-P

3300PCS45451X5

10-50

3300-P

3300PCS40501X5

10-50

3300-P

3300PCS60401X5

100

10-50

3300-P

3300PCS50501X5

100

10-50

3300-Q

3300QCS30301X5

10-50

3300-Q

3300QCS30351X5

10-50

3300-Q

3300QCS30401X5

10-50

3300-Q

3300QCS30451X5

10-50

3300-Q

3300QCS30501X5

10-50

Line

Chromium satin finishing

3300-P 3300-P

B C A

| SITE CYLINDERS Code

Description

3000SOT153OXX1XXKA

Site cylinder with KA key. The main advantage of this cylinder is the use of the same key for all doors in site. When workings are over, replace the site cylinder with the definitive one.

3000SOT3015 Half cylinder knob predisposition Ă&#x2DC; 8x14 mm.

3000QOT3015 Half cylinder knob predisposition Ă&#x2DC; 8x52 mm.

| CYLINDERS: SPARE PARTS Code

Description

PR3000SZB0838 Additional tail device for all cylinder line P and line Q length 38 mm PR3000SZB0847 Additional tail device for all cylinder line P and line Q length 47 mm PR3000SZB0854 Additional tail device for all cylinder line P and line Q length 54 mm 0CK1XNICODE Key codified as sample for cylinder K1 0CK1XNIPLUS Additional key to standard supply for cylinder K1 0CK1XNISBOZ Blank key for cylinder K1 0CK2XNICODE Key codified as sample for cylinder K2 0CK2XNIPLUS Additional key to standard supply for cylinder K2 0CK2XNISBOZ Blank key for cylinder K2 0CK2XNISBFL Blank key with foldable grip for cylinder K2. Smaller size of the key. Useful for those who have not much room.

0CK3XNICODE Key codified as sample for cylinder K3 0CK3XNIPLUS Additional key to standard supply for cylinder K3 0CK3XNISBOZ Blank key for cylinder K3 0CKYXNICODE Key codified as sample for cylinder KY 0CKYXNIPLUS Additional key to standard supply for cylinder KY 0CKYXNISBOZ Blank key for cylinder KY IM3100XA2XXXX Cover-key for cylinder K1 IM3200XBKXXXX Cover-key for cylinder K2 IM3300XVEXXXX Cover-key for cylinder K3 | Personalized cover-key on request.

| PROTECTOR BLINDO LINE T |CODING EXAMPLE LINE T

FEATURES X=

Protector= 4246

FINISHING

empty field

Cover= 4146 | Plates= 4506 kit inside-outside | Escutcheons= 4300 4305 E= outside only | Inserts= 4010 4011 4012 4015 |Tickness= DC4246

4246

Code 4246KOL25M5 4246KPV25M5 4246KOS25M5 4246KCL25M5 4246KCS25M5 4246KF125M5 4246KF325M5 4246KF425M5 4246KOL35M5 4246KPV35M5 4246KOS35M5 4246KCL35M5 4246KCS35M5 4246KF135M5 4246KF335M5 4246KF435M5

H. DEFENDER

INTERSPACES HOLES DEFENDER KEY-GUIDE

25 30 35 45

5= interspace 31 mm

key-guide Securemme

interspace 38 mm

Description

Kit (in+out) protector Ø 46x25 mm cylinder h 30

Kit (in+out) protector Ø 46x35 mm cylinder h 40

Finishing OL PV OS CL CS F1 F3 F4

15 15 15 15 15 15 15 15

OL PV OS CL CS F1 F3 F4

15 15 15 15 15 15 15 15

INTERNAL

EXTERNAL

4300

4146XOL

4010XBK

4246XZT25M5

4246EOL25M5 4246EPV25M5 4246EOS25M5 4246ECL25M5 4246ECS25M5 4246EF125M5 4246EF325M5 4246EF425M5 4246EOL35M5 4246EPV35M5 4246ESV35M5 4246ECL35M5 4246ECS35M5 4246EF135M5 4246EF335M5 4246EF435M5

Kit protector outside Ø 46x25 mm cylinder h 30

Kit protector outside Ø 46x35 mm cylinder h 40

OV PV OS CL CS F1 F3 F4

15 15 15 15 15 15 15 15

OL PV OS CL CS F1 F3 F4

15 15 15 15 15 15 15 15

EXTERNAL

4300

4146XOL

4246XZT25M5

| KIT LINE T OF PROTECTION Code

Description

Finishing

4246XZT25M5 Protector Ø 46x25 mm for cylinder h 30. Interspace 38 mm.

4246XZT30M5 Protector Ø 46x25 mm for cylinder h 35. Interspace 38 mm.

4246XZT35M5 Protector Ø 46x35 mm for cylinder h 40. Interspace 38 mm.

4246XZT45M5 Protector Ø 46x45 mm for cylinder h 50. Interspace 38 mm.

4246XZT25A5

Protector Ø 46x25 mm for cylinder h 30. Interspace 31 mm. |To combine with the cover below

4260XZT30M5

60 Tear-proof protector with basis Ø 60 mm Ø 46x30 mm for cylinder h 30/35 mm |To combine with the cover below

4146XOL 4146XPV 4146XOS 4146XCL 4146XCS 4146XF1 4146XF3 4146XF4 4146XF5 4146XF9 4300KOL 4300KPV 4300KOS 4300KCL 4300KCS 4300KF1 4300KF3 4300KF4 4300KF5 4300KF9 4305KOL 4305KCL 4305KCS 4305KF1 4305KF3 4305KF4 4506KOL 4506KPV 4506KOS 4506KCL 4506KCS 4506KF1 4506KF3 4506KF4 4506KF5 4506KF9 4010XBK 4011XBK 4012XBK 4015XBK

DC4246XZB10DF

| Cover To combine with the protector

External escutcheons 62x82 mm, hole 46, including plastic support. To combine with locks line 25M and line 26. Predisposition for all inserts page 43 and protector Blindo.

8 mm external bent escutcheons 62x82 mm, hole 46, including plastic support. To combine with protector Blindo 4246.

Escutcheons 62x170 mm, hole 46, including plastic support and adapters for handle Ø 15,16,18 e niplex M10. To combine with locks line 25 universal only for cylinder heart and line 26. Predisposition for inserts and protector Blindo.

Cylinder insert for escutcheons line 4300 and 4506

Knob cylinder insert for 4300 and 4506

OL PV OS CL CS F1 F3 F4 F5 F9

120 120 120 120 120 120 120 120 120

OL PV OS CL CS F1 F3 F4 F5 F9

120 120 120 120 120 120 120 120 120

OL CL CS F1 F3 F4

120 120 120 120 120 120

OL PV OS CL CS F1 F3 F4 F5 F9

60 60 60 60 60 60 60 60 60 60

4015XBK

4010XBK

Thickness in galvanized steel 1 mm

| PROTECTOR FORTEZZA Protector FORTEZZA for safety doors and frames. Anti-drilling steel body, Ø 50 mm, interspace 38 mm. Heights available: 15, 22, 25 mm.

|CODING EXAMPLE LINE FORTEZZA

FEATURES X=

Protector= 4250 Cover= 4150 |Escutcheons= 4330

empty field outside only

4250

Code

Description

4250XZT15M5 4250XZT22M5 4250XZT25M5

FINISHING

H. DEFENDER

INTERSPACES HOLES DEFENDER

KEY-GUIDE

15 22 25

5= interspace 38 mm key-guide Securemme

Protector Fortezza Ø50x15 mm Protector Fortezza Ø50x22 mm Protector Fortezza Ø50x25 mm

Finishing ZT

| To combine with cover and taer-proof escutcheon

4150XPV 4150XCL 4150XCS 4150XF4

Finishing cover for protector Fortezza

PV CL CS F4

120 120 120 120

| To combine with cover and taer-proof escutcheon

4330XPV13XX 4330XCL13XX 4330XCS13XX 4330XF413XX 4330XBK13XX 4330XPV22XX 4330XCL22XX 4330XCS22XX 4330XF422XX 4330XBK22XX 4330XPV27XX 4330XCL27XX 4330XCS27XX 4330XF427XX

4251EPV15M5 4251ECL15M5 4251ECS15M5 4251EF415M5

4251EPV22M5 4251ECL22M5 4251ECS22M5 4251EF422M5

4251EPV25M5 4251ECL25M5 4251ECS25M5 4251EF425M5

Tear-proof escutcheon in bended steel arranged for protectore Ø 50 mm h 15

PV CL CS F4 BK

60 60 60 60 60

Tear-proof escutcheon in bended steel arranged for protectore Ø 50 mm h 22

PV CL CS F4 BK

60 60 60 60 60

PV CL CS F4

60 60 60 60

PV CL CS F4

15 15 15 15

PV CL CS F4

15 15 15 15

PV CL CS F4

15 15 15 15

Tear-proof escutcheon in bended steel arranged for protectore Ø 50 mm h 25

Completed kit protector Fortezza Ø 50 x15

Completed kit protector Fortezza Ø 50 x 22

Completed kit protector Fortezza Ø 50 x 25

| Possibility to combine the protector with standard escutcheon Ø 50 line 4320 pag. 40

| PROTECTOR OVAL LINE O |CODING EXAMPLE LINE 0 Protector= 4242 Cover= 4142

FEATURES X= K=

FINISHING

empty field |kit

H. DEFENDER

INTERSPACES HOLES DEFENDER KEY-GUIDE

25 35 45

5= interspace 38 mm key-guide Securemme

Escutcheons= 4310 4315 | Plates= 4510 | Inserts= 4460 4465

4242

Code 4242XZT25M5

Description Protector 42x50 h24

4242XZT35M5

Size external cylinder

Finishing

OL CL CS F1 F3 F4 F5

120 120 120 120 120 120 120

OL CL CS F1 F3 F4 F5

120 120 120 120 120 120 120

OL CL CS F1 F4

120 120 120 120 120

OL CL CS F1 F3 F4 F5

60 60 60 60 60 60 60

Protector 42x50 h34

To combine with the cover below

4142XOL 4142XCL 4142XCS 4142XF1 4142XF3 4142XF4 4142XF5 4310KOL 4310KCL 4310KCS 4310KF1 4310KF3 4310KF4 4310KF5

4315KOL 4315KCL 4315KCS 4315KF1 4315KF4

4510KOL 4510KCL 4510KCS 4510KF1 4510KF3 4510KF4 4510KF5

| Cover

To combine with the protector

Escutcheon 62x82 mm

Bent escutcheon

Plate 62x170 mm

4460XBK

4465XBK

Insert cylinder for line 4510, 4300

4465XBK Insert knob cylinder for line 4510, 4300

| KIT OF PROTECTION Code 4255KOL14M2 4255KCS14M2 4255KCL14M2 4255KBR14M2

4265KOL14M2 4265KCS14M2 4265KBR14M2

4320KOL 4320KCL 4320KCS 4320KF4

Description Protector Topsicur

Protector Scudo

Escutcheon 62x82 mm, hole 50 mm with plastic support, to combine with universal protector Ă&#x2DC; 50 mm art. 4250XZT25M5

Finishing OL CS CL BR

50 50 50 50

OL CS BR

50 50 50

OL CL CS F4

120 120 120 120

4255XOL

4221IBK10XX Protector for grate, internal 35x75x10 mm black

4221EBK15G2 Protector for grate, external 35x75x15 mm black

INTERNAL

DC4221EZB30DF External thickness, galvanized for protector grate

DC4221IZB30DF Internal thickness, galvanized for protector grate

EXTERNAL

| DOUBLE WARD PROTECTOR Double ward protector for safety doors and frames endowed with Securemme lock. Anti-drilling steel body, Ø 46 mm, interspace 38 mm. Height 27 mm. Black finishing.

|CODING EXAMPLE LINE

FEATURES

Protector= 4224 |Escutcheon= 4300 | Plate= 4505

4224

Code 4224EBK27MX 4224ECL27MX 4224EOL27MX

4300KOL 4300KPV 4300KOS 4300KCL 4300KCS 4300KF1 4300KF3 4300KF4 4300KF5 4300KF9 4505KOL 4505KPV 4505KOS 4505KCL 4505KCS 4505KF1 4505KF3 4505KF4 4505KF5 4505KF9

K= E=

FINISHING |kit |external

H. DEFENDER

INTERSPACES HOLES DEFENDER

Description

Finishing

Double ward protector Ø 46 x h 27 mm. interspace 38 mm.

BK CL OL

60 60 60

OL PV OS CL CS F1 F3 F4 F5 F9

120 120 120 120 120 120 120 120 120 120

OL PV OS CL CS F1 F3 F4 F5 F9

60 60 60 60 60 60 60 60 60 60

Escutcheon 62x82 mm, hole Ø 46 mm. with plastic support to combine with double ward protector.

Plate 62x170 mm, hole Ø 46 mm with plastic support to combine with double ward protector.

interspace 38 mm.

INSTRUCTIONS FOR USE OF DOUBLE WARD PROTECTOR

KEY IN VERTICAL POSITION

INSERT THE KEY INTO THE PROTECTOR

TURN THE KEY ON 90°

INSERT THE KEY INTO THE LOCK

TURN THE KEY TO CLOSE THE BOLTS

| ESCUTCHEONS LINE T |CODING EXAMPLE LINE T

FEATURES X= K= U=

Escutcheons, plates= 4300 4505 4506 4509 | Inserts

4300

Line 4300KOL 4300KPV 4300KOS 4300KCL 4300KCS 4300KF1 4300KF3 4300KF4 4300KF5

FINISHING |kit

|empty field |universal

Description

Finishing

Internal/external plate 62x82 mm, hole 46, including plastic support. To combine with locks line 25 double ward heart, 24 and line 26. OPTIONAL: inserts 4000XBK, 4001XBK, 4000UBK, 4001UBK, 4010XBK, 4015XBK11, 4020XBK16, 4021XBK16, 4030XBK and protector Blindo 4246XZT.

OL PV OS CL CS F1 F3 F4 F5

4300KOL

120 120 120 120 120 120 120 120 120

4300KOL+4000XBK

4300KOL+4001XBK

4300KOL+4000UBK

4300KOL+4001UBK

4300KOL+4010XBK

4300KOL+4011XBK

4300KOL+4012XBK

4300KOL+4015XBK11

4300KOL+4020XBK16

4300KOL+4021XBK16

4300KOL+4030XBK

4300KOL+4246XZT

4505KOL 4505KPV 4505KOS 4505KCL 4505KCS 4505KF1 4505KF3 4505KF4 4505KF5

Internal/external plate 62x170 mm, hole 46, including plastic support and adapters for handle Ø 15,16,18 e niplex M10. To combine with locks line 25 universal only for double ward heart and line 24. OPTIONAL: inserts 4000XBK, 4001XBK, 4000UBK, 4001UBK, 4021XBK16.

OL PV OS CL CS F1 F3 F4 F5

60 60 60 60 60 60 60 60 60

4505KOL

Look out: all finishings are also available for EASY MASTER heart. Line 4318. Prices unchanged.

4505KOL+4000XBK

4506KOL 4506KPV 4506KOS 4506KCL 4506KCS 4506KF1 4506KF3 4506KF4 4506KF5

4506KOL+4010XBK

4318KOL+4000XBK

4505KOL+4001XBK

4505KOL+4000UBK

Internal/external plate 62x170 mm, hole 46, including plastic support and adapters for handle Ø 15,16,18 e niplex M10. To combine with locks line 25 universal only for cylinder heart and line 26. OPTIONAL: inserts 4010XBK, 4015XBK11 and protector Blindo 4246XZT.

4506KOL+4011XBK | Finishing legend on page 3

4506KOL+4012XBK

OL PV OS CL CS F1 F3 F4 F5

4505KOL+4001UBK

60 60 60 60 60 60 60 60 60

4506KOL+4015XBK11

4505KOL+4021XBK16

4506KOL

4506KOL+4246XZT

| ESCUTCHEONS LINE T Line 4509KOL 4509KPV 4509KOS 4509KCL 4509KCS 4509KF1 4509KF3 4509KF4 4509KF5

Description

Finishing

Escutcheons 62x170 mm, hole 46, including plastic support without hole for handle. To combine with locks line 251 and 241. Predisposition for inserts 4000XBK, 4001XBK, 4021XBK16.

OL PV OS CL CS F1 F3 F4 F5

60 60 60 60 60 60 60 60 60

4509KOL

Without hole for handle

Look out: all finishings are also available for EASY MASTER heart. Line 4318. Prices unchanged.

4509KOL+4000XBK 4509KOL+4001XBK 4509KOL+4000UBK 4509KOL+4001UBK 4509KOL+4010XBK 4509KOL+4011XBK 4509KOL+4012XBK 4509KOL+4015XBK11 4509KOL+4030XBK 4509KOL+4246XZT

4000XBK 4000UBK 4001XBK 4001UBK 4010XBK 4011XBK 4012XBK 4015XBK11 4020XBK16 4021XBK16 4030XBK 4000KOL 4000KOS 4000KCL 4000KCS 4000KF1 4000KF4 4010XOL 4010XOS 4010XCL 4010XCS 4010XF1 4010XF4 4015XOL 4015XCL 4015XCS 4015XF1 4015XF4 4030XOL 4030XCL 4030XCS 4030XF1 4030XF4

Double ward flat insert for escutcheons line 4300, 4505 Double ward universal flat insert black Double ward concave insert for escutcheons line 4300, 4505 Double ward universal concave insert black Cylinder insert for escutcheons line 4300, 4506 Concave cylinder insert for escutcheons line 4300, 4506 Bent cylinder insert for escutcheons line 4300, 4506 Knob cylinder insert for escutcheons line 4300, 4506 Flat handle insert for escutcheons line 4300 Convex handle insert for escutcheons line 4300 Limiting device insert for escutcheons line 4300

Double ward metal flat insert for escutcheons line 4300, 4505, 4509.

Cylinder metal insert for escutcheons line 4300, 4506, 4509.

4000XBK

BK BK BK BK

4001XBK

BK BK BK BK

4010XBK

BK BK OL OS CL CS F1 F4 OL OS CL CS F1 F4

Knob cylinder metal insert for escutcheons line 4300, 4506, 4509.

OL CL CS F1 F4

Limiting device metal insert for escutcheons line 4300, 4506, 4509.

OL CL CS F1 F4

| Finishing legend on page 3

| ESCUTCHEONS LINE O |CODING EXAMPLE LINE O

FEATURES | Escutcheons= 4310 4307 | Plates= 4510 4507

X= K=

FINISHING

empty field |kit

Round escutcheon, adapters for handle, key-guide, inserts

4310

Line 4310KOL 4310KCL 4310KCS 4310KF1 4310KF3 4310KF4 4310KF5

4310KOL+4050XBK

4510KOL 4510KOS 4510KCL 4510KCS 4510KF1 4510KF3 4510KF4 4510KF5 4510KF9

4510KOL+4050XBK

Description

Finishing

External escutcheons 62x82 mm, buttonhole 42x50, including plastic support. To combine with locks line 25 universal for double ward or cylinder heart. OPTIONAL: inserts 4050XBK, 4060XBK, 4065XBK, 4071XBK18, 4080XBK and protector line “Ovale” 4242XZT.

4310KOL+4051XBK

4310KOL+4060XBK

OL CL CS F1 F3 F4 F5

4310KOL+4065XBK

Internal/external plate 62x170 mm, buttonhole 42x50, including plastic support and adapters for handle Ø 15,16,18 and niplex M10. To combine with locks line 25 universal for double ward or cylinder heart. OPTIONAL: inserts 4050XBK, 4060XBK, 4065XBK, 4071XBK18, 4080XBK and protector line “Ovale” 4242XZT.

4510KOL+4051XBK

4310KOL+4080XBK

OL OS CL CS F1 F3 F4 F5 F9

4510KOL+4060XBK

4050XBK

120 120 120 120 120 120 120

4310KOL+4071XBK18

60 60 60 60 60 60 60 60 60

4510KOL+4065XBK

4310KOL+4242XZT

4510KOL+4242XZT

4050XBK

Double ward flat insert for escutcheons line 4510KOL and 4310KOL

4051XBK

BK Double ward concave insert for escutcheons line 4510KOL and 4310KOL

4060XBK

BK Cylinder insert for escutcheons line 4510KOL and 4310KOL

4065XBK

BK Knob cylinder insert for escutcheons line 4510KOL and 4310KOL

4071XBK18

BK Convex black nylon handle insert for escutcheons line 4310KOL

4080XBK

BK Limiting device insert for escutcheons line 4310KOL | Finishing legend on page 3

4065XBK

| ESCUTCHEONS Line 4307XOL 4307XCL 4307XCS 4307XF1 4307XF3 4307XF4

4507KOL 4507KCL 4507KCS 4507KF1 4507KF3 4507KF4

4752XOL 4752XCL 4752XCS 4752XF1 4752XF3 4752XF4

Description

Finishing

External keyboard escutcheons 62x82 mm, including plastic support, for electromechanical lock line 27

Internal plate 62x170 mm complete of plastic support for electromechanical locks line 27

Round escutcheon for handle Ø 52x10 mm hole 24

OL CL CS F1 F3 F4

4507KOL

OL CL CS F1 F3 F4

PL4752XBK18ML 4752XOL

PL4752XBK16ML Plastic Ø 52x10 hole 16 border 21 spring right/left

PL4752XBK18ML Plastic Ø 52x10 hole 18 border 21 spring right/left

4755XOL 4755XCL 4755XCS 4755XF1 4755XF3 4755XF4

Round escutcheon Ø 55x7 mm hole 16 mm

OL CL CS F1 F3 F4

4755XOL PL4755XBK14XX

PL4755XBK14XX Plastic support for round escutcheon 50x7 mm for door knob.

IN5000XBKXXXX Adapters for handle Ø 15,16,18 e niplex M10.

GC2500XBKXX05

IN5000XBKXXXX

GC2500XBKXX05

BK Groups 5 pieces extendible 5 mm key-guide for double ward key

4921KF1 4921KF3 4921KF4

4922KF1 4922KF3 4922KF4

Internal and external double ward key aluminium escutcheons 45x65 mm with key-hole of the lock

Internal and external cylinder key aluminium escutcheons 45x65

F1 F3 F4

4921KF3

F1 F3 F4

4922KF3

| Finishing legend on page 3

| KITS FOR SAFETY DOORS |CODING EXAMPLE MODEL

5000

Code 5000XOL 5000XOS 5000XCL 5000XCS 5000XF1 5000XF3 5000XF4

X= K=

FINISHING

campo vuoto |kit

Description Assembly example of handle

Ø Ø

Finishing 8 8 8 8 8 8 8

OL OS CL CS F1 F3 F4

10 - 50 10 - 50 10 - 50 10 - 50 10 - 50 10 - 50 10 - 50

5000XOL

HANDLE TIZIANA For examples of kit composition see page 48, 49

5001XOL 5001XCL 5001XCS 5001XF1 5001XF3 5001XF4

Assembly example of egg handle

8 8 8 8 8 8

OL CL CS F1 F3 F4

EGG HANDLE

For examples of kit composition see page 48, 49

5020XOL 5020XOS 5020XCL 5020XCS 5020XF1 5020XF3 5020XF4

Assembly example knob Ø 65

7020XZB20XX

5001XOL

10 - 50 10 - 50 10 - 50 10 - 50 10 - 50 10 - 50

8-M10 8-M10 8-M10 8-M10 8-M10 8-M10 8-M10

M10

OL OS CL CS F1 F3 F4

5 - 25 5 - 25 5 - 25 5 - 25 5 - 25 5 - 25 5 - 25

5 - 25

OL CL CS F1 F4

5 - 25 5 - 25 5 - 25 5 - 25 5 - 25

5020XOL

KNOB Ø 65 mm

Fixing plate For examples of kit composition see page 48, 49

5021XOL 5021XCL 5021XCS 5021XF1 5021XF4

Assembly example knob Ø 75

8-M10 8-M10 8-M10 8-M10 8-M10

5021XOL

KNOB Ø 75 mm

7020XZB20XX

M10 Fixing plate For examples of kit composition see page 48, 49

5 - 25

| KITS FOR SAFETY DOORS Code 5030XOL 5030XCL 5030XCS 5030XF1 5030XF3 5030XF4

Ø Ø

Description

Finishing

Ø8 Ø8 Ø8 Ø8 Ø8 Ø8

8 8 8 8 8 8

OL CL CS F1 F3 F4

5030XOL

Ø8

5030XBK

Ø9 Ø9 Ø9 Ø9 Ø9 Ø9

OL CL CS F1 F3 F4

5050XOL

8 8 8 8 8 8

OL CL CS F1 F3 F4

5060XOL

8-Ø9 8-Ø9 8-Ø9 8-Ø9 8-Ø9 8-Ø9

OL CL CS F1 F3 F4

5031XOL

8 8 8 8 8 8

OL CL CS F1 F3 F4

5061XOL

5100XZB0120 5100XZB0140 Passerby tool 5100XZB0160

8x120 8x140 8x160

ZB ZB ZB

5100XZB

5110XZB0055 5110XZB0065 Expansion square 5110XZB0080 5110XZB0090

8x55 8x65 8x80 8x90

ZB ZB ZB ZB

5110XZB

5120XZB0100 5120XZB0110 Square + niplex M10 5120XZB0120

8x100 8x110 8x120

ZB ZB ZB

5120XZB

5130XOT0016

Half moon for cylinder

5030XBK Half moon for cylinder in black nylon

5050XOL 5050XCL 5050XCS 5050XF1 5050XF3 5050XF4 5060XOL 5060XCL 5060XCS 5060XF1 5060XF3 5060XF4

5031XOL 5031XCL 5031XCS 5031XF1 5031XF3 5031XF4

5061XOL 5061XCL 5061XCS 5061XF1 5061XF3 5061XF4

Little knob for limiting device 5731UCR033XXX18

Little handle for opening limiting device with escutcheon 30x60 mm

Half moon for opening limiting device 8 LAPM and for cylinder Ø 9

Little handle for opening limiting device, escutcheon 55X8 with expansion square 8x55 mm.

5130XOT0016

M10 Niplex M10 | Finishing legend on page 3

| ACCESSORIES KIT Code 5020KOLROMA 5020KCLROMA 5020KCSROMA 5020KF1ROMA 5020KF3ROMA 5020KF4ROMA

5020KOLBARI 5020KOSBARI 5020KCLBARI 5020KCSBARI 5020KF1BARI 5020KF3BARI 5020KF4BARI

Ø Ø

Description

Middle door knob kit line O with round escutcheon Ø 50x7 mm

Middle door knob kit line T with escutcheon Ø 62x82 mm

Finishing 8-M10 8-M10 8-M10 8-M10 8-M10 8-M10

OL CL CS F1 F3 F4

5020KOLROMA

8-M10 8-M10 8-M10 8-M10 8-M10 8-M10 8-M10

OL OS CL CS F1 F3 F4

5020KOLBARI

| EXAMPLES FOR KNOB KIT COMPOSITION | Chose among the different possible combinations and

| KNOB KIT ROMA

| KNOB KIT RIVA

| KNOB KIT BARI

| KNOB KIT COMO

| ACCESSORIES KIT | EXAMPLES FOR HANDLE KIT COMPOSITION | Chose among the different possible combinations and

| HANDLE KIT PISA

| HANDLE KIT ROMA

| HANDLE KIT BARI

| HANDLE KIT RIVA

| HANDLE KIT ASTI

| HANDLE KIT FANO

| HANDLE KIT COMO

| SWITCHES |CODING EXAMPLE LINE |Switches= 560 561 562 563

FIXING

HAND

D= S= U=

1= 3=

Limiting device=564 5711 565 5721

planar lateral

PROJECTION

INTERSPACE (model 2/3 bolts)

SPACE

CR=

03= 3 43= 43

37= 37 50= 50 53= 53 56= 56 XX= for 1 bolt

14 15 17 18

Chromed

universal

frontal

560

| right | left

H. H.

BOLT FINISHING

| Plate switch 1 bolt.

Hand

S S

H H

H2 H2

5600DCR03XXX14 5600SCR03XXX14 5600DCR03XXX17 5600SCR03XXX17 5600DCR43XXX14 5600SCR43XXX14 5600DCR43XXX17 5600SCR43XXX17

P P P P P P P P

DX SX DX SX DX SX DX SX

3 3 3 3 43 43 43 43

14 14 17 17 14 14 17 17

29 29 32 32 29 29 32 32

50 50 50 50 40 40 40 40

24 S

Ø18

P/L P/L

Ø6

H 65 80

| Lever switch 1 bolt.

5611DCR03XXX15 5611SCR03XXX15 5611DCR03XXX17 5611SCR03XXX17 5611DCR03XXX18 5611SCR03XXX18 5611DCR43XXX15 5611SCR43XXX15 5611DCR43XXX17 5611SCR43XXX17 5611DCR43XXX18 5611SCR43XXX18

L L L L L L L L L L L L

Hand

S S

H H

H2 H2

DX SX DX SX DX SX DX SX DX SX DX SX

3 3 3 3 3 3 43 43 43 43 43 43

15 15 17 17 18,5 18,5 15 15 17 17 18,5 18,5

30 30 32 32 34 34 29 29 32 32 34 34

40 40 40 40 40 40 30 30 30 30 30 30

Switch left, fixing P

20-25-30-40

MAX 40

Ø18

Code

P/L P/L

Ø6

35 50

Code

Switch left, fixing L | Lever switch 2 bolts.

Hand

S S

I I

5621DCR0337X15 5621SCR0337X15 5621DCR0337X17 5621SCR0337X17 5621DCR0337X18 5621SCR0337X18 5621DCR0350X17 5621SCR0350X17 5621DCR4337X15 5621SCR4337X15 5621DCR4337X17 5621SCR4337X17 5621DCR4337X18 5621SCR4337X18

L L L L L L L L L L L L L L

DX SX DX SX DX SX DX SX DX SX DX SX DX SX

3 3 3 3 3 3 3 3 43 43 43 43 43 43

37 37 37 37 37 37 50 50 37 37 37 37 37 37

H H 15 15 17 17 18,5 18,5 17 17 15 15 17 17 18,5 18,5

H2 H2 30 30 32 32 34 34 32 32 30 30 32 32 34 34

20 20 20 20 20 20 20 20 15 15 15 15 15 15

20-25-30-40

Ø18

MAX 40

72 87

P/L P/L

Code

Ø6

H H2

65 80

Switch left, fixing L

| Big switch 2 bolts interspace 50 mm

P/L P/L

5630DCR0350X15 L 5630SCR0350X15 L

Hand

S S

I I

H H

H2 H2

DX SX

3 3

37 37

15 15

30 30

20 20

102

Code

77 90

Ø8

120

= 30

| SWITCHES | Big switch 1 bolt.

P/L P/L

Hand

S S

H H

H2 H2

5640DCR03XXX15 5640SCR03XXX15 5641DCR03XXX18 5641SCR03XXX18

P P L L

DX SX DX SX

3 3 3 3

15 15 18,5 18,5

30 30 34 34

20 20 20 20

91,5 20

Ø18

Ø6

70 90

Code

8,2 102,7 117

H H2

Switch left, fixing P

Ø8,2 150

Switch left, fixing L

H H2

| Big switch 2 bolts.

Hand

S S

I I

H H

H2 H2

5650DCR0353X15 5650SCR0353X15 5651DCR0353X18 5651SCR0353X18 5650DCR4353X15 5650SCR4353X15 5651DCR4353X18 5651SCR4353X18

P P L L P P L L

DX SX DX SX DX SX DX SX

3 3 3 3 43 43 43 43

53 53 53 53 53 53 53 53

15 15 18,5 18,5 15 15 18,5 18,5

30 30 34 34 30 30 34 34

91,5

20 20 20 20 20 20 20 20

S 20 8

Ø1

Ø8,2 150

H H2

Switch left, fixing L

Ø6

P/L P/L

Code

70 90

Ø18

Ø8,2

102,7 118

Switch left, fixing P

H H2

| Big switch 2 bolts with frontal.

Code

P/L P/L

5653DCR0353X15 F 5653SCR0353X15 F

Hand

S S

I I

H H

H2 H2

DX SX

3 3

53 53

15 15

30 30

Ø5,5

15 15

91,5

70 90

53 240

Ø6

30 Ø8,2

102,7 117

2,5

19 35

Switch left, fixing F

| Big switch 3 bolts

DX SX

3 3

56 56

15 15

30 30

15 15

7 3

103

Ø8,2

Ø6

H2 H2

140

H H

I I

S S

5680DCR0356X15 P 5680SCR0356X15 P

Hand

P/L P/L

Code

Ø1

20 120

= = 30

| LIMITING DEVICES | Limiting device.

P/L P/L

5731UCR03XXX18 L

Hand

S S

H H

H2 H2

18,5

PR5730XXX40P6

25 Ø1

35 50

Code

Hub Ø 9x35 mm for pivot P6LA

PR5730XXX50P6

Hub Ø 9x50 mm for pivot P6LA

H H2

| Night service.

P/L P/L

Hand

S S

H H

H2 H2

5701DCR06XXX15 5701SCR06XXX15 5701DCR06XXX17 5701SCR06XXX17 5701DCR06XXX18 5701SCR06XXX18

L L L L L L

DX SX DX SX DX SX

9 9 9 9 9 9

15 15 17 17 18,5 18,5

30 30 32 32 34 34

30 30 30 30 30

Ø1

Code

8 H 73

Night service SX, fixing L | Limiting device fixed point.

P/L P/L

Hand

S S

H H

H2 H2

5711DCR03XXX15 5711SCR03XXX15 5711DCR03XXX17 5711SCR03XXX17 5711DCR03XXX18 5711SCR03XXX18

L L L L L L

DX SX DX SX DX SX

9 9 9 9 9 9

15 15 17 17 18,5 18,5

30 30 32 32 34 34

30 30 30 30 30

Ø18

Code

8 H 73

Limiting device SX, fixing L | Switch moving point and night service.

P/L P/L

Hand

S S

H H

H2 H2

5721DCR03XXX15 5721SCR03XXX15 5721DCR03XXX17 5721SCR03XXX17 5721DCR03XXX18 5721SCS03XXX18

L L L L L L

DX SX DX SX DX SX

9 9 9 9 9 9

15 15 17 17 18,5 18,5

30 30 32 32 34 34

30 30 30 30 30 30

Ø18

Code

8 H 73

Limiting device SX, fixing L

* 52

| Accessories to be order apart. (see following page)

| ACCESSORIES Code

Description

CP5710DCRXXLA CP5710SCRXXLA

Right/left-hand striking plate for limiting device chromed

Ø1

0,7

51,5

VT57M8XZB18CP Galvanized screw Ø18x17,5 mm for limiting device 100,5

131

R13

DA5710XZBXXM8 Hub M8 self-blocking ,4 R7

CP5740DCRXXLA CP5740SCRXXLA

4 29

Right/left-hand striking plate for limiting device chromed Ø11 ,6

VT57M8XZ20CP

117

DA5710XZBXXM8 Hub M8 self-blocking

141

62,5

Galvanized screw Ø18x17,5 mm for limiting device

2,5

CP5730DCRXXLA CP5730SCRXXLA

4,8 35

Right/left -hand striking plate for limiting device chromed finishing

51,7

VT57M8XZB17CP 130

DA5710XZBXXM8

100

Galvanized screw Ø15x17,1 mm

Hub M8 self-blocking

CP2540DCRXXLA CP2540SCRXXLA

3,6 Ø1

1,8

Right/left -hand striking plate for limiting device chromed finishing

38,5

5,5

Ø2

VT57M8XZB20CP 80

106

Galvanized screw M8x20

DA5710XZBXXM8 Hub M8 self-blocking 2

5870XDKXXAR Rod Ø18 adjustable from 320 to 500 mm, vertical closing

5880XDKXXAR Rod Ø18 adjustable from 830 to 1485 mm, vertical closing

5850XDKXXAR Rod Ø 14 adjustable from 470 to 750 mm for switch

5860XDKXXAR Rod Ø 14 adjustable from 725 to 1000 mm for switch

5803XZB1008 Threaded rod Ø 10x1150 mm with coupling M8 for art. 2003-2008-2013-2102-2103

5818XZB10GN Hooking rod Ø 10x1150 mm for art. 2018-2022

| ACCESSORIES Code

Description

7025XDK30M5

Fixing plate to weld 134x206x3 mm for double ward lock line 25

Assembly example

7026DDK30M5 Fixing plate 134x206x3 mm for European cylinder lock right for tear-proof protector art. 4260XZT

7026SDK30M5 Fixing plate 134x206x3 mm for European cylinder lock left for tear-proof protector art. 4260XZT

7030DDK30 Fixing plate right 134x276x3 mm for double ward lock+ cylinder look or double cylinder and tear-proof protector art. 4260XZT

7030SDK30 Fixing plate left 134x276x3 mm for double ward lock + cylinder look or double cylinder and tear-proof protector art. 4260XZT

7040XDK30 Fixing plate to weld 119x98x3 mm for switch

7025XDK30M5

7026DDK30M5 M5

5MA

56 70

Ø 50

Ø62

206 178

178

206

1,5

108 134

7142XAC10XX

7164XAC10XX

Antidrilling double ward hardened plate 130x198x1mm durity 50/53 HRC

7166XAC10XX

Antidrilling cylinder hardened plate 130x198x1mm durity 50/53 HRC

* 198

7165XAC10XX

Antidrilling universal hardened plate 130x198x1mm durity 50/53 HRC

Ø6

0,4

7142XAC10XX Antidrilling protector hardened plate 130x198x1mm durity 50/53 HRC

7124XCN20XX

Antidrilling plate 60x78x2 mm 130

7125XCN20XX 7126XCN20XX

Antidrilling plate 50x70x3 mm Antidrilling plate 80x73x2 mm

7164XAC10XX

* 54

7165XAC10XX

7166XAC10XX

7142XAC10XX

| To combine on safety doors looks to get class 7 UNI EN 12209

| ACCESSORIES Code

Description

5800XZT15XX

5910XZB1820 Floor socket Ø 15 mm for art. AA1 and art. AA2

5800XZT22XX Floor socket Ø 22 mm for art. AA1 and art. AA2

PU5803XZB08AS Pivot for rod fixing

PU5818XZB10AS Anti-drilling pivot Ø 10 mm for rod art. 5803 and art. 5818

PU5818XZB12AS Anti-drilling pivot Ø 12 mm for rod art. 5803 and art. 5818

PU5818XZB14AS Anti-drilling pivot Ø 14 mm for rod art. 5803 and art. 5818

5910XZB1820 Tear-proof gard Ø 18 mm. with threaded M10.

SQ2260XZB1205

7011XZB20 Fixing plate to weld 205x65x1,5 mm, galvanized finishing for double ward locks for rolling shutter

83,5 65

7011XZB20MZ 55,5 79

Fixing plate to weld 83,5x79x2 mm, galvanized finishing 6,6

Ø3

7020XZB20XX Fixing plate for knob Ø 40x2,5, galvanized finishing

7200UCR 5 mm latch-adjustment. Chromium-plated. Frame gap 30x26 mm.

7300XBKXX28 Cap for frame. Gap requested 25x25 mm.

AS2503KZBXXGN

AS2503KZBXXGN Pair of leap rods

AS2504XZBXX08 Leap rod

AC2600KZAXXXX Tab in steel + screw for cylinder fixing

SQ2500XDK25AU Tab for safety doors locks fixing

SQ2501XDK2006 Tab for safety doors locks fixing

AC2600KZAXXXX 3

ALDVG 41,8

Tab for switches fixing

31,3

| ACCESSORIES Code

Description

FR2500XCRXX28

FR2500XCRXX28 Frontal 35x356x3 mm, interspace 28, chromed finishing

FR2500XCRXX37 Frontal 35x356x3 mm, interspace 37, chromed finishing

FR2510XCRXX28 Frontal 35x356x3 mm, interspace 28, chromed finishing

FR2510XCRXX37 Frontal 35x356x3 mm, interspace 37, chromed finishing

FR2530XCRXX28 Frontal 35x356x3 mm, interspace 28, chromed finishing

FR2530XCRXX37 Frontal 35x356x3 mm, interspace 37, chromed finishing

FR5653XCRXX53 Frontal 35x240x3 mm, chromed finishing

CP2500XCRXX28

CP2500XCRXX37 19

CP2500XCRXX37 Striking plate 35x230x2,5 mm chromed finishing

2,5

Striking plate 35x230x2,5 mm chromed finishing

CP2530XCRXX28 Striking plate 35x230x2,5 mm chromed finishing 37

Striking plate 35x230x2,5 mm chromed finishing

230

CP2530XCRXX37

CP5650XCRXX53

114

Striking plate big switch 2 bolts 27x114x3 mm, chromed finishing

Ă&#x2DC; 6,2

CP2000XZB

CP2000XZB Striking plate 22x180x2,5 mm galvanized finishing

CP2001XZB Striking plate 22x180x2,5 mm, galvanized finishing

CP2008XZB Striking plate 25x150x2,5 mm, galvanized finishing

CP2017XOT Striking plate 25x245x2,5 mm brass finishing

CP2017XZB Striking plate25x245x2,5 mm galvanized finishing

CP2020XOT Striking plate25x230x2,5 mm brass finishing

CP2020XCR Striking plate 25x230x2,5 mm chromo finishing

CP2025XOT Striking plate22x180x2,5 mm brass finishing

CP2025XCR Striking plate 22x180x2,5 mm chromo finishing

2,5

| ACCESSORIES Code

Description

5500DCR00XX Security door strike right

5500SCR00XX Security door strike left

5500DCR03XX Door strike project. 3 mm (right)

5500SCR03XX Door strike project. 3 mm (left)

5528DCR0028 5528SCR0028 5528DCR0328 5528SCR0328 5537DCR0037 5537SCR0037 5537DCR0337 5537SCR0337

Door strike int. 28 mm right/left Door strike proj. 3 mm int. 28 mm right/left Door strike int. 37 mm right/left Door strike proj. 3 mm int. 37 mm right/left

5220XBK4050 Handle for frames in black nylon with head srew

5200XBK25XX Handle

5201XBK25XX Double ward key handle

5202XBK25XX Cylinder key handle

5210XBK25XX Swinging handle Loretta from zamak. Black finishing. Expansion square 8 mm. Size only 10 mm.

| KEYS Keys are designed in real dimensions. Lay the key on the picture to identify the model.

Code

Description

0CVAXNISBOZ

Length

Finishing

100

105

Blank key for rolling shutters and balancing doors 58x20,5x11,4 mm

0CVBXNISBOZ Key 68x20,5x11,4 mm

0CVCXNISBOZ Key for safe 6 gorges

0CVEXNISBOZ

Key 105x20,5x11,4 mm

| KEYS Code

Description

0CRBXNISBOZ

Length

Finishing

100

110

Key 73x23x11,4 mm

0CRMXNISBOZ Key 73x23x11,4 mm

0CRCXNISBOZ

0CAFXNISBOZ

Key 88x23x15,3 mm

Key for locks to apply

| KEYS Code

Description

0CF8XNISBOZ

Length

Finishing

105

Key for safe 8 gorges

0CCGXNISBOZ

Key for safety doors

0CCHXNISBOZ Key for safety doors

0CCIXNISBOZ Key for safety doors

| KEYS Code 0CC4XNISBOZ 0CC4XNICODE

0CC5XNISBOZ 0CC5XNICODE

0CC6XNISBOZ 0CC6XNICODE

Description Securmap registered blank key for protected duplication Key codified Securmap with registered duplication

Securmap registered blank key for protected duplication Key codified Securmap with registered duplication

IM0CC4XAZXXXX

Length

Finishing

105

Key - cover for double ward blue

IM0CC4XAZXXXX

Key - cover for double ward red

SECUR CARD

Black Black

CARD Securmap property card

SPARE PARTS: HEARTS FOR UNIVERSAL LOCKS LINE 25 25SX

25MX

25CX

25TX

25KX

| CODING EXAMPLE 25H | With double ward heart.

25SX

Line 25

Heart model

25SX 25MX 25CX 25TX 25KX

15 15 15 15 15

| Hand

+ + XXXXXX +S + 4 = ZB

| right | left

D= S=

| galvanized white

ZB=

Model double ward keys Securmap | Securmap

Key model for double ward heart 4= 5= 6=

85 95 105

(CV2500) (CV2502) (CV2501)

4=85 5=95 6=105

| N. keys

|3 + 1 T |5 + 1 T

6= 7=

25SXDZBXXXXXXS46 | LISTE FOR MOST COMMON ARTICLES Code

Hand

Stem keys

N. keys

25SXDZBXXXXS46 25SXSZBXXXXS46 25SXDZBXXXXS47 25SXSZBXXXXS47 25SXDZBXXXXS56 25SXSZBXXXXS56 25SXDZBXXXXS57 25SXSZBXXXXS57

D S D S D S D S

85 85 85 85 95 95 95 95

3+1T 3+1T 5+1T 5+1T 3+1T 3+1T 5+1T 5+1T

HEART SPARE PART FOR SAFETY DOOR IN PRODUCTION FROM 1997 TO 2000. Code 2599DZBXXXXHG3 2599SZBXXXXHG3 2599DZBXXXXHH3 2599SZBXXXXHH3 2599DZBXXXXHI3 2599SZBXXXXHI3

Description

Right or left-hand heart spare part with 3 sealed 85 mm keys.

Right or left-hand heart spare part with 3 sealed 95 mm keys.

Right or left-hand heart spare part with 3 sealed 105 mm keys.

CYLINDER KIT 26: for changing from double ward to cylinder lock | CODING EXAMPLE 26KTDF425

26KT

Prezzo base kit 26= 60,00 € | Standard price kit 26 = 60,00 €

25CXX

DC4246XZB10DF

4060XBK

4065XBK

4510KOL

4310KOL

4242XZT25M5

4142XOL

OPENING DOOR HAND

D= S= R= L=

| push right | push left | pull right | pull left

FINISHING

OL= PV= OS= CL= CS= F1= F3= F4= F5= F9=

H. DEFENDER

25XX

25XX 35XX

26KTDF425XX

| LISTE FOR MOST COMMON ARTICLES Code

Hand

Finishing

H defender

26KTDCL25XX 26KTDCS25XX 26KTDF425XX 26KTDOL25XX 26KTSCL25XX 26KTSCS25XX 26KTSF425XX 26KTSOL25XX

D D D D S S S S

CL CS F4 OL CL CS F4 OL

25 25 25 25 25 25 25 25

| DOOR VIEWERS |CODING EXAMPLE LINE

FEATURES

014= Ø 14 016= Ø 16

D= C=

014

HAND | Diamante 200° X | Cantiere 160°

FINISHING BR= OL= CL= CS= BK= WH=

LENGHT MIN./MAX. | bronzed

| black | white

| shiny brass | shiny chrome | satin chrome

A B C

Min Max

014DXBR57XX 014DXOL57XX 014DXCL57XX 014DXCS57XX

14 14 14 14

32 32 32 32

30 30 30 30

57 - 90 57 - 90 57 - 90 57 - 90

BR OL CL CS

| Wide-angle | Wide-angle | Wide-angle | Wide-angle

120 120 120 120

014DXBR60XX 014DXOL60XX 014DXBK60XX 014DXCL60XX 014DXCS60XX 014DXWH60XX

14 14 14 14 14 14

32 32 32 32 32 32

30 30 30 30 30 30

60 - 110 60 - 110 60 - 110 60 - 110 60 - 110 60 - 110

BR OL BK CL CS WH

120 120 120 120 120 120

014DXBR80XX 014DXOL80XX 014DXCL80XX 014DXCS80XX

14 14 14 14

32 32 32 32

30 30 30 30

80 - 120 80 - 120 80 - 120 80 - 120

BR OL CL CS

| Wide-angle | Wide-angle | Wide-angle | Wide-angle

120 120 120 120

016CXBR40XX 016CXOL40XX

16 32 28 16 32 28

40 - 70 40 - 70

BR OL

| Usual | Usual

120 120

016CXBR57XX 016CXOL57XX 016CXCS57XX

16 32 28 16 32 28 16 32 28

57 - 90 57 - 90 57 - 90

BR OL CS

| Usual | Usual | Usual

120 120 120

016CXBR60XX 016CXOL60XX 016CXCS60XX

16 32 28 16 32 28 16 32 28

60 - 110 60 - 110 60 - 110

BR OL CS

| Usual | Usual | Usual

120 120 120

016DXBR40XX 016DXOL40XX 016DXCL40XX 016DXCS40XX

16 16 16 16

32 32 32 32

30 30 30 30

40 - 70 40 - 70 40 - 70 40 - 70

BR OL CL CS

| Wide-angle | Wide-angle | Wide-angle | Wide-angle

120 120 120 120

016DXBR60XX 016DXOL60XX 016DXBK60XX 016DXCL60XX 016DXCS60XX 016DXWH60XX

16 16 16 16 16 16

32 32 32 32 32 32

30 30 30 30 30 30

60 - 110 60 - 110 60 - 110 60 - 110 60 - 110 60 - 110

BR OL BK CL CS WH

120 120 120 120 120 120

016DXBR80XX 016DXOL80XX 016DXCL80XX 016DXCS80XX

16 16 16 16

32 32 32 32

30 30 30 30

80 - 120 80 - 120 80 - 120 80 - 120

BR OL CL CS

| Wide-angle | Wide-angle | Wide-angle | Wide-angle

120 120 120 120

Finishing

View

o | W ide - a a ng o l

N o rm

Gr a nd

a l e | U su a l

n gl

Code

40= 40/70 57= 57/90 60= 60/110 80= 80/120