Seanic Digital Catalog – Spring 2017

SEANIC OCEAN SYSTEMS D I G ITA L C ATA LO G / S P R I N G 2017

A C E NT U R I O N C O M PA NY

SEANIC OCEAN SYSTEMS Tom Ayars President

A

s we near the mid-year point, it’s clear the

In our last issue, we announced that Seanic and sister

market will likely not provide the level of recovery

company UES of Aberdeen had joined forces. Now that

everyone hoped for in 2017. With oil below $50

UES is stocking Seanic ROV tooling for both rental and

(bbl/WTI) again, operators will be very selective on which

sale, UES can provide service to the diving, ROV, and

projects they fund and the focus will remain on cost-

decommissioning industries. This month, we talk about

saving solutions, quality, and safety. Seanic recognizes

their decommissioning cutting shears and how UES can

current market conditions may be the norm for some

become a sole source for many of your subsea tooling

time to come, which is why we continue to highlight

needs.

products and services in each publication that we believe

Seanic is pleased to announce two new distribution

embrace those competencies.

partners. Scanmudring in St. Johns, Newfoundland, and

In this issue, we feature an article on the refurbishment

Reliance Subsea in Port of Spain, Trinidad. Both companies

and upgrade of several Vertical Collet Connector Running

will be able to support your ROV tooling needs in their

Tools used with subsea jumper installations. Due to

regions.

the vast number of existing subsea structures fitted

With summer upon us don’t miss an opportunity to utilize

with proprietary connections that interfaced with these tools, a cost-effective means of restoring and, in some cases, upgrading this mature hardware was needed.

Even though cost was a factor, quality and safety was paramount in the final decision.

We also feature our ECB cavitation water blasting system.

This system was originally developed many years ago to safely and effectively clean marine growth on the relatively soft materials used on strakes and fairings.

Since that time, operators have become increasingly more confident in the ECB’s effectiveness; over the last 5 years, the ECB has become an industry standard for UWILD inspections.

2 / From The President 2017

Seanic’s 30’ deep test tank to demonstrate your products.

With the success of last year’s Demo Days we’ve decided to continue to offer our tank to others in the subsea industry to demo their products in the test pool for no charge.

We hope you find this publication beneficial and welcome any feedback. On behalf of the Seanic employees around the world, we want to thank you for your continued support.

CONTENTS From the President . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 //

Seanic News . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 //

Featured Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9 //

Product Catalog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10 //

Standard ROV Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 // Engineered Solutions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 // UES Products. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 //

Product Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

104 //

Centurion Group Portfolio. . . . . . . . . . . . . . . . . . . . .

106 //

Table Of Contents 2017/ 3

WHAT’S NEW AT SEANIC?

VERTICAL COLLET CONNECTOR RUNNING TOOLS REFURBISHMENT Seanic’s Engineered Solutions Group

experience in using the equipment; a level

Upon receipt of the equipment, quality,

recently completed the refurbishment

of competence related to engineering,

engineering, and warehouse personnel

and upgrade of several Vertical Collet

documentation, and design; and an

worked together to disassemble, catalog,

Connector Running Tools for subsea

effective facility capable of handling

and inspect each component of the

jumper installations. This 15-year-old

hardware of this type.

structures. Each unit was assigned a

equipment had been showing its age after many years of offshore service.

As such, it was important to restore this mature hardware due to the vast number of subsea structures fitted with proprietary connections with which they interface. Each structure stands over 16ft tall and weighs 18 to 20 kips.

The owner’s goal was to bring the equipment

up

to

current

industry

standards and refurbish them to a level of quality equal to or greater than likenew condition. Seanic was selected due to a combination of reasons that ranged from skilled personnel with first-hand

4 / Seanic News 2017

unique identifier that was then marked

The

structures

on every component as it was carefully

custom-machined sub-assemblies for

removed from the system. Disassembly

installation and actuation. During the

took place in Seanic’s warehouse, and

process, Seanic had limited availability or

the bridge crane safely and efficiently

access to OEM documentation, making

removed large sub-assemblies. A detailed

the repair or replacement of some of

review of the original material selection

the sub-components challenging. Once

and integrity was conducted to ensure it

replacement, repair, and final coating

met owner and industry specifications.

of all weldments were completed, the

Additionally, all weldments were stripped

structures

of coating and subjected to Non-

thorough front-end work of Seanic’s

Destructive Examination and repairs

Engineered Solutions Group and quality

were made when and where necessary.

department eliminated any project or

were

contained

several

reassembled.

The

schedule setbacks.

Final testing included hydrostatic testing of the entire hydraulic system and functioning of all actuators, cylinders, and motors. A final System Integration Test proved functionality of the structure to integrate and operate the connection of a subsea jumper.

To learn more about Seanic’s Engineered Solutions Group, please contact info@ seanicusa.com.

Seanic News 2017 / 5

UES: AHEAD OF THE CURVE Underwater Engineering Services (UES),

its impressive portfolio. They successfully

Seanic’s sister company in Aberdeen, is

decommissioned materials such as

ahead of the curve and well established

power

on the growing decommissioning scene.

flexible risers, and rigid pipe.

Both UES and Seanic specialize in the

UES utilizes two types of cutting shear.

supply of marine and subsea support

The first was the Verachtert hydraulic

cables,

umbilicals,

flowlines,

equipment to the diving, ROV, and decommissioning sectors within the offshore oil and gas and renewables industries. Featuring several products in this catalog, UES built its reputation by being able to deliver the types of pipeline cutting activities required to remove pipes on-site from either topside or subsea.

Over a 10-year period during which the company carried out almost 7,000 cuts both topside and subsea, UES successfully completed a significant number of decommissioning projects within the U.K. Continental Shelf and Norwegian waters and continued to build

6 / Seanic News 2017

CAT-S80 SHEAR (TOP); VERACHTERT HYDRAULIC SHEAR, VHS-60 (BOTTOM)

shear (VHS 60), which is generally used for topside cutting but can also be configured for subsea deployment. This cutter has the largest mouth opening of the two offered, with an 800-mm opening jaw height and 830-mm jaw depth. It delivers a crushing force of 9,850 kN, making it one of the most powerful cutting performers in the sector.

The second cutting shear was the CAT S80, which can also be used for both topside and subsea decommissioning projects. With a jaw opening of 620 mm and jaw depth 820 mm, this has a crushing force of 8,809 kN. For subsea operations, the CAT S80 has two sets of lifting assemblies to enable it to carry out cuts either horizontally or vertically.

Both cutters have dedicated transit frames that can also be used for deck cutting operations. The shears operate

SEANIC’S DEMO DAYS & STATE-OF-THE-ART TEST TANK Seanic’s Demo Days was such a success in 2016 they are pleased to announce plans to continue with their Demo Day program in 2017. Seanic’s offer provides other companies in the subsea industry the opportunity to access this state-of-the-art test tank at little or no cost as they demonstrate their products to current and potential clients. Several companies took advantage of this offer last year and the turnout was clearly a success. We’re currently accepting applications from vendors to participate in future Demo Days and would suggest you contact Karen North (knorth@seanicusa.com subject Demo Day) to schedule your event.

Seanic’s facility in Katy, TX (near Houston) includes a full-service test tank, giving clients the ability to test their products in a controlled environment in a cost-effective manner. The tank is 50 ft (15m) square, 30 ft (9m) deep which is large enough to wet-test very large subsea hardware, leaving a work class ROV full access from all sides. It’s reinforced 3 ft (0.9m) concrete base, is designed to accommodate heavy items up to 2000lbs/sq ft (9765 kg/sq m) to be tested.

at a maximum of 350 bar and, therefore, a suitable Hydraulic Power Unit (HPU) is essential to provide the necessary operating parameters.

Over the years, UES has delivered tailored equipment packages for topside, subsea, or both, and, depending on the configuration, the equipment supplied may consist of cutting shears, hydraulic power units, control cabin, hose deployment reel, and over boarding equipment.

In recent years, engineers at UES delivered a decommissioning campaign for a North Sea operator, which involved using a twin shear package. The project saw the two shears being used simultaneously on the back deck of a vessel, allowing them to pull in twice the volume of umbilical and double the speed of removal.

Each shear utilized a dedicated HPU, allowing them to operate simultaneously.

Also included was a heated control cabin to allow the technicians to operate the equipment at a safe distance and monitor the control systems for both the shears and the HPUs.

Seanic News 2017 / 7

SCEANIC WELCOMES NEW DISTRIBUTOR PARTNERS Seanic is excited to introduce their newly formed distributor partnerships with Scanmudring Canada Inc. in St. Johns, Newfoundland and Labrador, Canada, and Reliance Subsea Services in Port of Spain, Trinidad. After extensive research we concluded these two companies were ideal to partner with, due to geographic location, customer relationships and above all capabilities “says Tom Ayars”, President of Seanic Ocean Systems.

“In today’s environment, our clients need the most flexible, proven solutions,” says Jason Price, Managing Director of Scanmudring Canada. “This partnership further demonstrates our proactive approach to customer collaboration, and our commitment to delivering tailormade solutions that meet specific client needs. With a large roster of highlyeffective, proprietary equipment located in Eastern Canada, our clients will benefit from both time and cost efficiencies.”

Looking to the Future

About Scanmudring

About Reliance

With more than 17 years’ experience,

Reliance Subsea Services (Reliance) is a

Scanmudring has advanced as a global

dynamic company created by local and

leader in the development, manufacture

committed professionals to address

and operation of advanced subsea heavy

a growing subsea market. Reliance

machinery for harsh environments.

specializes in tooling and equipment

Scanmudring specialize in dredging,

of all types, manpower support and

excavation and construction work for the

warehouse provisions.

oil, gas and renewable energy industries, providing

unparalleled

operational

expertise. Scanmudring is dedicated to providing innovative, robust and reliable solutions that are versatile enough to meet the most demanding subsea challenges.

facility near the Piarco Airport, and

With the full support of Seanic Ocean

with its proximity to local ports,

Systems, both companies have been outfitted with a pool of ROV rental tools

With a new tooling rental and services

Reliance becomes the first of its kind in Scanmudring Canada Inc. is a subsidiary

providing rapid response support to Oil

of Scanmudring AS (Norway), and

& Gas operators and service providers

services primarily Eastern Canada and

throughout

behalf of Seanic for engineering design

the Artic.

Region. Combining this service with the

build projects.

Contact:

ability to provide engineering, project

and have the ability to sell and support standard tooling rental activity. Both companies will also liaise with clients on

Jason Price, P.Eng. Managing Director, Scanmudring Canada jasonprice@scanmudring.ca 709-325-2299

the

entire

management, fabrication and storage, Reliance strives to ensure the best quality customer service and world class products to guarantee a long-lasting business relationship built on trust.

Contact: Karishma Maharaj Director of Operations info@reliancesubsea.com

8 / Seanic News 2017

Caribbean

868-686-2739

ECB SPECIALIZED TOOLS CAVITATION WATER BLASTING: EFFECTIVE CLEANING FOR SUBSEA OBJECTS

Seanic’s ECB cavitation cleaning system

damage the object being cleaned. Using

was developed to gently and effectively

cavitation for cleaning has alleviated

remove barnacles and other marine

these issues and allowed Seanic to make

growth from soft or sensitive surfaces,

an extremely efficient and powerful

such as strakes and fairings. Unlike

cleaning machine. Additionally, this

traditional 5,000 or 10,000 PSI water

one-of-a-kind marine growth removal

blasters, our ECB unit is capable of

device has become an industry standard

cleaning subsea objects with enough

for risers, moorings, and vessel hulls

force to remove barnacles and deposits

during underwater inspection in lieu of

without causing damage to soft plastic

dry docking, or UWILD as it is commonly

or rubber surfaces. Traditionally, high-

called.

pressure water blasters are often

PLAY VIDEO FOR DEMONSTRATION

ineffective because they aren’t powerful enough or they are too powerful and PHOTO CREDIT: AIMS INTERNATIONAL

Featured Products 2017 / 9

PRODUCT CATALOG

SPRING 2017

www.seanicusa.com

A Centurion Group company

SEANIC STANDARD ROV TOOLING

www.seanicusa.com

A Centurion Group company

ELECTRIC SMART TORQUE TOOL API 17H CLASS 1-4

Seanic has designed an Electric Smart Torque Tool in the tradition of providing our customers a simple, rugged and reliable product. The tool has a closed loop speed/position control system, allowing fine control and angular position feedback.

Real-time torque limiting gives very accurate torque feedback and control. The tool is ideally suited for both subsea and surface applications requiring up to 2000 ft-lbs of torque.

TECHNICAL SPECIFICATIONS REAL-TIME TORQUE LIMITING

Real-time torque limiting gives very accurate torque feedback and control. The tool is ideally suited for both subsea and surface applications requiring up to 2000 ft-lbs of torque.

HIGHLY ACCURATE TORQUE FEEDBACK

As it does not require an HPU for operation, surface testing in the yard or shop environment is easily accomplished. Torque is measured by internal feedback with an accuracy of +/- 2%.

2000 ft lbs 25 inches 15 rpm

MAX TORQUE OUTPUT

120 VAC at 12.5 A max

POWER

LENGTH

120 lbs

WEIGHT (AIR)

MAX SPEED

15 rpm

MAX SPEED

Start/stop; Direction; Speed; Torque Control

MOTOR CONTROLS

Latches disengage when power is lost. Same proven latch design as standard Seanic torque tools. Internal electric-driven HPU circuit provides hydraulic power and control.

FULLY AUTOMATED HYDRAULIC-ACTUATED LATCHES

Torque limited by closed loop motor current and strain gauge feedback. Safe Torque Off feature (torque output is immediately disengaged if limit is met).

TORQUE LIMITING AND ALARMING

No changes in accuracy or performance due to pressure and temp changes. Single 3/4� hose houses and protects the cable assembly, replacing multiple hydraulic hoses. Dynamic subsea test jig designed specifically for ETT use available as option.

125:1 TORQUE MULTIPLIER

Calibrated strain gauge feedback within +/-2%; Input current limiting and alarming; Optional communication (isolated RS232, ethernet); Turns counter, torque output, shaft position displayed topside; Speed limiting alarming; Resolver-based turns counter accurate to less than 1/10th degree of a revolution.

ADDITIONAL FEATURES

ROV Tooling 2017 / 13

SMART TORQUE TOOL

API 17H CLASS 1-4

The Seanic Smart Torque Tool has retained the rugged features of its predecessor and added the technologically advanced features our customers require.

TECHNICAL SPECIFICATIONS RUGGED FEATURES

We have retained the mechanical counter as a backup which allows for failsafe operation if the battery is depleted, but also added a digital display that provides real-time torque and turns both subsea and on the surface, via laptop control.

LOW MAINTENANCE DESIGN

The tool can be supplied as a stand-alone smart tool or with a proportional valve pack, laptop and GUI that can limit torques, control speed and direction and log values.

RELIABLE PERFORMANCE

Our robust latch system provides confidence that you are securely locked into the subsea bucket and will stay that way until you choose to disengage. In the case of an unforeseen power failure, our latches are spring-loaded and will retract, allowing you to safely disconnect from the work site.

LATCHES

Spring Return Robust Dogs 17-4 Hardened Fins

WEIGHT

110 lbs/50 kg (air) 85 lbs/39 kg (water)

MECHANICAL COUNTER

Display in Tenths Large, easy-to-read numbers Oil-filled, Independently-sealed housing Allows failsafe operation if battery is depleted or display is compromised

14 / ROV Tooling 2017

WHAT’S IN THE BOX + Subsea Display + Surface Test Jig and Read Out + #8 JIC Hoses (2) + #4 JIC Hose + Comp Bottle with Fittings + Operating & Maintenance Manual + Electrical Spares + Mechanical Spares + 195CC Motor (2) + 36CC Motor (2) + 1-4 End Effector and Test Stem + Cable Between Tool and Display

HI-TORQUE TOOL

API 17H

Seanic Ocean Systems has designed an API 17H and ISO 13628-8 compliant hi-torque tool to reliably perform a multitude of subsea applications.

TECHNICAL SPECIFICATIONS REMOVABLE 17H CLASS 4 NOSE

Our tool has a removable and exchangeable 17H Class-4 nose that can also be attached to Seanic’s Smart Torque Tool , for a convenient two-in-one functionality.

TWO-IN-ONE FUNCTIONALITY

The hi-torque tool is useful in installing umbilicals and flying leads, opening and closing valves on a Christmas tree, and conjunction with Tool Deployment Units (TDUs).

MECHANICAL TURN COUNTER

A mechanical turns counter, which needs no battery and features highly visible numbers for easy monitoring, eliminates the inherent problems commonly associated with electronic digital counters.

WHAT’S IN THE BOX + Surface Test Jig with Topside Digital Readout + Hoses + Complete Spares Kit + 1 High Torque Motor + 1 High Torque Adapter + Operating & Maintenance Manual

Mechanical (no battery)

COUNTER FEATURES

Highly visible numbers Displays in tenths Oil-filled, independently sealed housing 72 lbs/33 kg (air)

WEIGHT

55 lbs/25 kg (water)

ROV Tooling 2017 / 15

FLYING LEAD ORIENTATION TOOL The Seanic Flying Lead Orientation Tool, or FLOT, is designed and built for ease of operation and maintenance. The tool allows for angular and rotational orientation of a class 4 torque tool to aid in connection of flying leads subsea.

Simple design allows for customized configurations. Built-in load holding valves ensure safe and reliable pitch control.

TECHNICAL SPECIFICATIONS DURABLE DESIGN

The Seanic Flying Lead Orientation Tool (FLOT) provides the operator a durable design with greater versatility and less overall weight, which means you don’t sacrifice valuable payload.

RIGOROUSLY TESTED

Seanic’s FLOT provides the option of roll up to 360° in certain configurations, giving you the ability to dock flying leads in the most difficult of conditions.

BUILT TO FIT SEANIC TORQUE TOOL

This unit has been designed to fit the Seanic’s torque tool, and has been customized or retrofitted for compatibility with many industry-recognized torque tools.

MATERIALS DIMENSIONS

316 SS / 6061 T6 AL / Ni-Al-Brz

WHAT’S IN THE BOX

17”W x 40”L x 14”H Two open-center directional control valves

+ #8 JIC Hose (2)

Pitch cylinder: 3000 psig at .5 gpm

+ #4 JIC Hose (2)

Roll motor: 3000 psig at 1.75 gpm

+ Spares Kit

FLOT WEIGHT

149 lbs/68 kg (air) - 108 lbs/49 kg (water)

+ Operating & Maintenance Manual

PITCH ANGLE

135⁰ (90⁰ down from horizontal, 45⁰ up from horizontal)

ROLL ANGLE

32⁰ either direction (360⁰ optional configuration depending on application)

HYDRAULIC REQUIREMENTS MAX OPERATING PSI & FLOW

MAX HANG WEIGHT ON TT

600 lbs

16 / ROV Tooling 2017

SUBSEA TORQUE

VERIFICATION UNIT

Seanic Ocean Systems has a subsea verification unit that verifies torque readings of an API 17H Class 1-4 torque tool at depth.

This tool is also available as a dual gauge unit, subsea switchable between class 1-2 and 3-4 without the need to change gauges at the surface. Useful when multiple tools are being used that require subsea verification prior to use.

TECHNICAL SPECIFICATIONS SUBSEA AND SURFACE READINGS

The unit readily attaches to the ROV cage or TMS to provide a reliable assessment of changes in torque output when adjustments are made, without the need to return to the surface.

SIMPLE TORQUE OUTPUT ASSESSMENT

Our verification unit boasts a two-in-one functionality, as it can additionally be used to verify torque adjustments on the surface in place of a normal torque tool test jig.

PURELY HYDRO-MECHANICAL DESIGN

Because it is a purely mechanical piece of equipment, our subsea verification unit has no electronics to fail, batteries to die, wires to break or electrical housings to flood.

WHAT’S IN THE BOX

316 L SS

MATERIALS

Nickel-Aluminum-Bronze

+ 2,200 ft-lb Gauge (2) + 500 ft-lb Gauge (2) + Test Stems + Operating & Maintenance Manual

17-4 SS API 17H Class 1-2 end effector

INTERFACE

API 17H Class 3 end effector API 17H Class 4 end effector 170 lbs/77 kg (air)

WEIGHT

145 lbs/65 kg (water) 2,000 ft-lbs

MAX INPUT TORQUE

ROV Tooling 2017 / 17

INTELLIGENT VALVE PACK Seanic Intelligent Valve Packs can be configured to meet many requirements. The pack is designed and built to operate our Smart Torque Tool, but can also be configured for other tooling requirements including FLOT’s and custom multi-function tools.

TECHNICAL SPECIFICATIONS COMPACT DESIGN

Standard design allows for scaling of valve size and type providing simple rugged function while maintaining compact and light weight form.

CUSTOM SOFTWARE

Closed or open loop control, data logging and custom control interfaces are all available options that can be added to the system.

STANDARD OR CONFIGURED TO SUIT

Graphical User Interface design can be customized for a wide range of applications.

WEIGHT

DIMENSIONS FEATURES

87 lb (air)

REQUIREMENTS

Power and Communications:

15 station

24 VDC @ 6 amps, RS232

68 lb (water)

Hydraulic:

10 1/4” W x 22” L x 8 3/4” H

3,000 psi @ 20 gpm max

15 NG directional control valves, capable of proportional pressure control on 10 stations Transducers integrated to monitor supply, return and ambient pressure Clear lid for viewing Diagnostic’s LED’s Isolated RS232 circuit Customizable software and valve configurations

18 / ROV Tooling 2017

30 #4 JIC A/B Outputs; #12 JIC P/T Inputs; Filter included

TORQUE TOOL ADAPTER

API 17H CLASS V

Seanic has designed and manufactured an API 17H Class IV to API 17H Class V torque adapter for use in all standard API 17H Class V interfaces.

Using an API 17H Class IV and API 17H Class V tool on the same dive is very common.

TECHNICAL SPECIFICATIONS API CLASS IV TO API CLASS V

The real beauty of an API 17H Class V adapter is that no hydraulic connection is required, which allows the API 17H Class V tool to be left in place while other API 17H Class IV duties are being performed.

SPRING-LOADED EFFECTOR (OPTIONAL)

The tool can be purchased with or without a spring-loaded end effector and in latching or nonlatching configurations.

WHAT’S IN THE BOX

Aluminum housing

MATERIALS

Steel gear reduction

+ Surface Test Jig and Read Out + Compensator Bottle Complete with Fittings and Gear Oil + Spares Kit + Operating & Maintenance Manual

17-4 SSTL location fins 17-4 SSTL end effectors Delrin nose 316 SSTL ROV handle 316 SSTL hardware 0-5,000 ft-lbs 215 lbs/98 kg (air)

TORQUE RANGE WEIGHT

170 lbs/77 kg (water)

ROV Tooling 2017 / 19

TORQUE TOOL ADAPTER

API 17H CLASS 6/7

Seanic has designed and manufactured an API 17H Class 6/7 torque adapter for use in all standard API 17H Class 6/7 interfaces.

The tool is ideally suited for any subsea application requiring up to 25,000 ft-lbs torque.

TECHNICAL SPECIFICATIONS MATERIALS

Stainless steel housing Steel gear reduction 17-4 SSTL location fins 17-4 SSTL end effectors

LATCHING OR NON-LATCHING CONFIGURATIONS

The tool can be purchased with or without a spring-loaded end effector and in latching or non-latching configurations.

NO HYDRAULIC INTERFACE NECESSARY

The tool requires no electrical or hydraulic interface, freeing the ROV to leave it in place and perform other subsea operations.

Delrin nose 316 SSTL ROV handle 316 SSTL hardware INPUT INTERFACE OUTPUT INTERFACE

API 17H Class 4 male end effector (1.5” square drive) API 17H Class 7 female end effector (3.5” square drive) API 17H Class 6 female end effector (2.625” square drive)

WEIGHT

535 lbs/243 kg (air) 425 lbs/193 kg (water)

TORQUE RANGE

5,000-25,000 ft-lbs

20 / ROV Tooling 2017

WHAT’S IN THE BOX + Surface Test Jig and Read Out + Standard Nosecone + Class 6/7 End Effector and Test Stem + Compensator Bottle Complete with Fittings and Gear Oil + Spares Kit + Vector Nosecone (optional) + Operating & Maintenance Manual

17 H/D HOT STABS

AND RECEPTACLES

Seanic manufactures and stocks a wide variety of API/ISO standard hot stabs and receptacles to meet your needs.

Using the highest quality materials and stringent quality program ensures our products perform in the harshest subsea environment.

TECHNICAL SPECIFICATIONS ROV FRIENDLY COMPLIANT HANDLES 316 SS

All products are accompanied with material certification of US manufacture as well as pressure test reports.

PRESSURE RATINGS TO 20,000 PSI

Pressure ranges are from 5,000-20,000psi on all models.

OTHER MATERIALS AVAILABLE UPON REQUEST

Stabs and manifolds conform to API 17D or API 17H (ISO 13628-8) and can be configured with various fitting sizes and types.

WHAT’S IN THE BOX

Handles are 316 SS

MATERIALS

Bodies are Xylane coated Nitronic 60

+ Operating & Maintenance Manual

Female receptacles are Nitronic 50 Nose tips are Ni-Al-Brz Fittings and fasteners are 316 SS O-rings are: 70 Durometer HNBR on Dummy Stabs 90 Durometer HNBR on PSI Stabs

ROV Tooling 2017 / 21

PADDLE VALVES Seanic Ocean Systems offers ROV-operable ball valve interfaces to complement the wide array of subsea ball, needle and directional control valves currently on the market.

Seanic’s commitment to durable design and construction ensures that your tools will hold up under the demands of the subsea environment.

We maintain a constant supply of paddle valves in stock, and can additionally provide your team with the necessary valve components to suit your project needs.

TECHNICAL SPECIFICATIONS CORROSION-RESISTANT

Seanic’s paddle valves, manufactured entirely from durable and corrosion-resistant stainless steel, are designed with hard stops to prevent an ROV from over-torquing and avoid costly damage to the valve stem.

ROV-OPERABLE INTERFACE

Seanic’s paddle valves meet the industry standard API 17H specifications for ROV interface tooling.

20-YEAR DESIGN LIFE

Designed with longevity in mind, our stainless steel paddle valves resist the damaging effects of subsea corrosion and boast a 20-year design life.

WHAT’S IN THE BOX MATERIALS

DEPTH RATING

WEIGHT

22 / ROV Tooling 2017

Stainless steel

Full ocean depth

11 lbs/5 kg

+ Operating & Maintenance Manual

HUB CLEANING TOOL

API STANDARD OR CUSTOM

This tool creates a clean and polished sealing surface to allow a gasket to attain a reliable seal, minimizing operational risks.

Our HUB Cleaning Tool can be built with a scrubbing surface of various ScotchBrite® pads or brushes to further break up tough marine deposits.

TECHNICAL SPECIFICATIONS REMOVES MARINE GROWTH

Seanic Ocean Systems has created a specially designed tool for the removal of fouling and marine growth from wellhead sealing surfaces prior to AX/VX gasket installation.

MANIPULATOR- OR HYDRAULICDRIVEN

The hub cleaning tool can be manipulator-driven or built for hydraulic operation, and is available to fit all API standard or other customer-requested hub sizes.

DESIGN ELIMINATES EXPOSED HARDWARE TO WELL BORE

A valuable instrument for subsea construction or drilling work, the hub cleaning tool features no bolts or pieces that could potentially fall into the wellhead, eliminating the risk of costly damage and retrieval efforts.

WHAT’S IN THE BOX + Operating & Maintenance Manual + Spare Scotch Brite® Pads + Spare Hardware

Stainless Steel

MATERIALS

Nickel-Aluminum-Bronze HDPE 65 lbs/29 kg (air)

WEIGHT

28 lbs/13 kg (water) 24.5”W x 18”H

DIMENSIONS

ROV Tooling 2017 / 23

GASKET REMOVAL TOOL

AX/VX AND CUSTOM DESIGN Seanic Ocean Systems has designed and manufactured a variety of ring gasket removal and installation tooling that boasts a rugged yet lightweight design to perform under the formidable conditions of the deep sea environment. In addition to the standard configurations currently in stock, we have engineered and manufactured custom Max-8 and Max-14 gasket removal and replacement tool designs that require side entry to the wellhead (2” and 4” AX).

TECHNICAL SPECIFICATIONS RUGGED, LIGHTWEIGHT DESIGN

This tool can be manufactured to accommodate a variety of industry standards or custom gasket sizes.

RELIABLE REMOVAL AND INSTALLATION

Our gasket removal and installation tool, designed to be positioned by the ROV manipulator, efficiently and reliably replaces standard 18 3⁄4-inch AX and VX style gaskets.

CORROSION-RESISTANT ALLOY CONSTRUCTION

The tool is manufactured using 100% corrosion- resistant alloys, ensuring resistance to corrosion damage and years of dependable subsea operation.

WHAT’S IN THE BOX + AX/VX Tool

WEIGHT (AIR)

WEIGHT (WATER)

18 3/4”

61 lbs

54 lbs

+ #4 Size Hose (2)

16 3/4”

56 lbs

48 lbs

+ Spare Grip Tape

15”

50 lbs

42 lbs

MATERIALS

Stainless steel Nickel-Aluminum-Bronze

24 / ROV Tooling 2017

+ Operating & Maintenance Manual

5K WATER BLASTER

HIGH-PRESSURE

Seanic Ocean Systems has designed and manufactured high-pressure Triplex water blasters for a multitude of purposes. Common applications include cleaning marine growth from subsea hardware and structures prior to inspection and applying high pressure to break up hard materials in mud for eased dredging.

TECHNICAL SPECIFICATIONS HIGH-PRESSURE CLEANING

Built with longevity in mind, our 5K water blaster requires less frequent gearbox flushing than other similarly powered water blasters on the market.

POWERFUL FLUID INJECTION

In addition, the blaster can also be used as a high pressure, high-volume pump for rapid and powerful fluid injection.

AVAILABLE FOR RENTAL

We maintain a stock of our standard 5K water blaster, and offer the option of customization according to customer needs.

WHAT’S IN THE BOX + Compensator bottle complete with gear and oil fittings + Spare strainer + Wand / turbo nozzle + Gauge panel + #8 JIC hose (2) + #6 JIC hose (1) + #8 5K JIC hose (1) + Spares kit + Operating & maintenance manual

#8 JIC hoses for supply and return of the motor

INTERFACE

#6 JIC hose motor case drain #8 JIC high pressure hose for water nozzle Input: 3000 psi / Output: 5000 psi Input: 12 gpm / Output: 4.5 gpm 100 lbs/45kg (air) - 60 lbs/27 kg (water) 15”W x 27”L x 7”H

MAX PRESSURE MAX FLOW WEIGHT DIMENSIONS

ROV Tooling 2017 / 25

SUPER GRINDER The Seanic Ocean Systems Super Grinder is a powerful tool for cutting materials up to six inches in thickness.

Aside from the standard fiber abrasive blade, the super grinder can operate with blade options including carbide tooth, carbide brazed, and re rescue-grade blades to suit the most demanding of subsea cutting needs.

TECHNICAL SPECIFICATIONS MATERIALS

316 SS frame, shroud and hardware Painted aluminum housing

REMOVABLE AND REPLACEABLE BLADES

Powered by a commonly used and industry-accepted thruster motor, our Super Grinder features removable and replaceable blades to best suit the task at hand.

CUSTOM SIZE OPTIONS

Our standard 20-inch blade is in stock, and can be manufactured in sizes ranging from 6-30 inches, in addition to custom diameters according to project specifications.

RIGOROUSLY TESTED

This rugged and rigorously tested tool is used for decommissioning, storm repair and recovery and for cutting and removal of jumpers and umbilicals to the surface.

17-4 drive shaft Fiber abrasive grinding wheel Stainless steel Nickel-Aluminum-Bronze Oil of opportunity Motor requires A & B connection with #8 JIC Case drain requires C connection with #10 JIC Requires open center directional flow valve (1) WEIGHT

120 lbs/54 kg (air) 100 lbs/45 kg (water)

OPERATING PRESSURES

WHAT’S IN THE BOX + #8 JIC Hose (3) + Spare Abrasive Blades (15)

Max operation pressure: 3,000 psi

+ Diamond Blades (upon request)

Max flow rate: 20 gpm

+ Operating & Maintenance Manual

26 / ROV Tooling 2017

BRUSHING TOOL

SINGLE HEAD

Seanic Ocean Systems has designed a powerful brushing tool that cuts through tough marine growth on jacket legs, wellheads and other structures to allow for improved inspection, cutting, or attachment to subsea structures.

The hydraulic-driven rotary brush, held by the ROV manipulator, safely and efficiently cleans growth and accumulated debris on subsea structures. The brush operates to a working depth of 10,000 FSW.

TECHNICAL SPECIFICATIONS CUSTOM-ENGINEERED TO ORDER

Our custom-engineered brushing tool features removable individual bristle pods, eliminating the need to replace the entire brush head when exhausted bristles begin to show signs of wear.

OPTIONAL CITRIC ACID PUMP

The tool can be outfitted with a reservoir and pump to inject citric acid onto the cleaning site through the brush head, ensuring thorough removal of stubborn calcium growth and marine debris.

REMOVABLE BRISTLE PODS

Our custom-engineered brushing tool features removable individual bristle pods, eliminating the need to replace the entire brush head when exhausted bristles begin to show signs of wear. Seanic also offers a standard HUB cleaning tool that has an 18 3⁄4-inch diameter brush head, and can be customized to any dimensions to meet your subsea project specifications.

WHAT’S IN THE BOX

6061 T-6 Aluminum

MATERIALS

316 stainless steel

+ All Hoses Supplied

Ampco 45 Nickel-Aluminum-Bronze

+ Spare Bristle Pods

Carbon steel (motor)

+ Citric Acid Pump and Reservoir (as required) + Operating & Maintenance Manual

Polypropylene bristles Brass or nylon bristles 6 gpm @ 2,000 psi 10,000 FSW

HYDRAULIC REQUIREMENTS WORKING DEPTH

ROV Tooling 2017 / 27

ECB UNITS

CLEANING METHOD

Seanic has developed a revolutionary new cleaning method for subsea applications. By combining low pressure/ high volume pumps and inertial cavitation nozzles, Seanic has developed a safe and effective ROV powered cleaning system. Traditional high pressure water blasters can be ineffective or even destructive if used improperly. The Seanic ECB systems are a field proven solution for removing marine growth from vessel hulls, strakes, risers, fairings and moorings.

TECHNICAL SPECIFICATIONS SAFE, THOROUGH CLEANING WITHOUT DAMAGE

Using cavitation for cleaning has alleviated these issues and allowed Seanic to make an extremely efficient and powerful cleaning machine for removal of marine growth from vessel hulls, strakes, risers, fairings and moorings.

USED ON STRAKE/FAIRING, UWILD, ETC.

Seanic has developed a revolutionary new cleaning method for subsea applications.

RELIABLE, PREDICTABLE RESULTS

Traditionally high pressure water blasters are often ineffective because they aren’t powerful enough or they are too powerful and often damage the object being cleaned.

WHAT’S IN THE BOX INPUT

Input 3000 psi @ 20-22 gpm

OUTPUT

Output 3000 psi @ 14 gpm

WEIGHT

275 lbs (air) 225lbs (water)

MATERIALS

316 SS Aluminum

DIMENSIONS

28 / ROV Tooling 2017

30”W x 36”L x 12”H

+ Pump Assembly + Nozzles/Hoses + Complete Spares Package Includes Fittings, Hoses, etc. + Maintenance Tools and Supplies + Operating & Maintenance Manual + Spares Inventory List

MULTIPURPOSE PUMPS

10K-15K PSI

This unique pump has the ability to pump a multitude of fluids and can be used for methanol service with no risk of cross contaminating the ROV’s supply oil.

These pumps can be delivered with a variety of different reservoirs and directional control valves rated for 10k and 15k service.

TECHNICAL SPECIFICATIONS 3.8:1 RATIO

Seanic’s multipurpose pumping system has a 3.8:1 ratio and is capable of pumping fluids to a working pressure of 10,000 psi.

CORROSIONRESISTANT DESIGN

The pump is rated for use in 10,000 FSW and is made of corrosion-resistant materials, making it robust and reliable for subsea use.

RATED TO 10,000 FSW DEPTH

The pump is ideally suited for hydrate remediation work, as it can draw a powerful 22 in HG vacuum.

316 SS housings, SS fittings

MATERIALS

Ni-Al-Brz piston 78 lbs/35 kg (air)

WEIGHT

60 lbs/27 kg (water) 10,000 psi, 2.5 gpm max flow Max HPU input pressure: 2900 psi

MAX OUTPUT PRESSURE OPERATING PRESSURES

Flow rate not to exceed 8 gal/min

WHAT’S IN THE BOX + Spares Kit + Operating & Maintenance Manual

Oil of opportunity

HYDRAULIC

Requires one open-center directional flow valve Pump and tank: #6 JIC fittings

CONNECTIONS

Input and output: #4 JIC fittings 10,000 FSW

WORKING DEPTH

36” x 6” x 8”

DIMENSIONS

ROV Tooling 2017 / 29

DYNASET PUMP

5K WATER BLASTER

The 5k Dynaset Water Blaster pump system was designed for high pressure, subsea cleaning.

TECHNICAL SPECIFICATIONS COMPACT SIZE

Common applications include cleaning marine growth from subsea hardware and structures prior to inspection and applying high pressure to break up hard materials in mud for eased dredging.

RELIABLE PERFORMANCE

At it’s core, the hydraulically driven Dynaset intensifier pump uses filtered sea water and a ROV friendly Turbo nozzle.

LOW MAINTENANCE

In addition, the pump can be used as a high pressure, high flow for rapid and powerful fluid injection.

WEIGHT DIMENSIONS

25 lbs (air) / 15 lbs (water) 18 in W x 19 in D x 7 in H

MATERIALS

Primarily Aluminum 6061-T6 and Stainless Steel

HYDRAULIC CONNECTIONS

Requires (1) open center directional control valve(s). P and T connections are #12 JIC male fittings.

INPUT PRESSURE & FLOW OUTPUT PRESSURE & FLOW

30 / ROV Tooling 2017

WHAT’S IN THE BOX

3,000 PSI @ 30 gpm max 5,000 PSI @ 5.5 gpm

+ Spare Hoses + Rebuild Kit + Operating & Maintenance Manual

PH PROBE Seanic Ocean Systems has designed a pH probe used to measure and monitor pH in the subsea environment, particularly useful in drilling operations and the prediction of cement returns. The probe, which features a handle for ease of manipulation by the ROV, monitors pH levels within a wellbore and assists in the accurate prediction of cement return.

TECHNICAL SPECIFICATIONS ACCURATE SUBSEA PH READINGS

The probe also features a logging function that can record pH readings for later download and analysis.

BATTERY-POWERED

Our pH probe is entirely self-contained and battery powered, with an extensive battery life of approximately 72 hours.

HIGHLY VISIBLE LED DISPLAY

The probe’s red LED display is highly visible in dark water, and features an energy-conserving sleep function that can be switched on or off by flashing the ROV lights.

WHAT’S IN THE BOX + Spares Kit + Solutions + Operating & Maintenance Manual

65 lbs/30 kg (air)

WEIGHT

10,000 FSW/3,000 MSW

DEPTH RATING

Approx 72 hours display time

BATTERY LIFE

54 in L x 7 in diameter (largest)

DIMENSIONS

Stainless steel body and display housing

MATERIALS

UHMW probe

ROV Tooling 2017 / 31

TORQUE RECEPTACLE

API 17D

Seanic Ocean Systems maintains a supply of standard and customizable API Torque Receptacles in a variety of materials to interface with an ROV torque tool. Our bearingless torque receptacles can be panel-mounted for reliable docking, valve rotation, and interface with a torque tool or other subsea equipment to prevent costly damage to installation valves.

TECHNICAL SPECIFICATIONS NICKEL ALUMINUM BRONZE CASTING

Seanic API Torque Receptacles are available in three materials to ensure sound interface and reliable performance with your subsea equipment. We offer torque receptacles in corrosionresistant stainless steel, durable carbon steel, or a self-lubricating Nickel-Aluminum-Bronze alloy.

NO PAINTING REQUIRED

While standard torque receptacles are currently in stock, Seanic’s API Torque Receptacle can be modified as needed to meet customer demands for specific projects or custom orders.

BUILT TO API 17H

Our superior quality torque receptacles conform to API 17H and ISO 13628-8 standards, and can be machined to match any custom bolt pattern—providing a seamless connection and guaranteed compatibility with your ROV.

WHAT’S IN THE BOX MATERIALS

1020 Carbon Steel

316 L Stainless Steel

Ni-Al-Brz

32 / ROV Tooling 2017

LINEAR VALVE OVERRIDE TOOL

LVOT/LAOT

The Seanic Linear Valve Override Tool (LVOT ) is designed to API 17H specifications to manually override linearly-actuated valves that have lost hydraulic control power and returned to the closed or fail-safe position. Custom lockout positions are available.

TECHNICAL SPECIFICATIONS ROV-DEPLOYABLE

The LVOT and lockouts are designed to be deployed through ROV intervention.

THREE LOCKOUT SIZE OPTIONS

Custom lockout positions are available.

MANUAL VALVE OVERRIDE

In addition to the LVOT, three different size lockouts are supplied to lock the linearly actuated valve at the 2-inch, 5-inch and 7-inch positions. The LVOT and lockouts are designed to be deployed through ROV intervention.

WHAT’S IN THE BOX + Type A, B and C Heads + Intensifier Panels + Lockouts (as needed) + Spares + Spares + Hoses + API 17H Hot Stab Receptacle (Dual Port or Single Port) + Operating & Maintenance Manual

300 lbs/136 kg (air)

WEIGHT

256 lbs/116 kg (water) 3000 psi (rod side)

MAX PRESSURE

9115 psi (piston side) 13 inches Spring retracts plunger

STROKE FAIL SAFE

170,000 lbs

MAX FORCE

Spring return retracts plunger

INTERFACE

ROV Tooling 2017 / 33

GL4 REGAN LATCH RELEASE

TOOL

Seanic Ocean Systems manufactures a GL4 Regan Latch Release Tool for the disconnection and removal of subsea guideposts.

The damaged or non-functional guidepost can then be retrieved to the surface along existing guide wires.

TECHNICAL SPECIFICATIONS SIMPLE, RUGGED AND RELIABLE

Our GL4 Regan Latch Release Tool, designed to be held in the ROV manipulator, enables an ROV to mechanically attach to the top of a guidepost and enable its removal using hydraulic power to compress and disengage the latching mechanism that holds the guidepost in place.

BUILT TO FIT GL-4 LATCHES

The GL4 Regan Latch Release Tool’s hydraulic supply can be either plumbed directly to the ROV, or supplied in the form of a hot stab attachment.

WHAT’S IN THE BOX MATERIALS

316 L SS, carbon steel or aluminum

STROKE

3”

OUTPUT

3,000 psi @ 2 gpm

RELEASE FORCE WEIGHT

18,000 lbs 35 lbs/16 kg (air) 28 lbs/13 kg (water)

34 / ROV Tooling 2017

+ Spares Kit + Hoses + Operating & Maintenance Manual

DOCKING CONE

API/ISO STANDARD

Seanic Ocean Systems manufactures and maintains a supply of API/ ISO standard docking cones for the stabilization and alignment of an ROV modular skid.

TECHNICAL SPECIFICATIONS API/ISO STANDARDS

Our docking cone is built to API/ISO standards guaranteeing ROV compatibility, no matter the application.

HYDRAULICALLY-ACTUATED

The hydraulically actuated docking cone connects to a receptacle and serves as an interface between objects for such purposes as tree and piletop landings, pile alignment, docking to subsea tooling systems, and as a component installed on a Tool Deployment Unit (TDU).

GUARANTEED ROV COMPATIBILITY

Seanic can also provide the matching female mating receptacle that can be mounted on the tree or pile for orientation and simplified interface purposes.

WHAT’S IN THE BOX + Hoses

316 Stainless Steel

MATERIALS

Anodized Aluminum Housing

+ Spare Seals Kit

Delrin Nose Cone

+ Operating & Maintenance Manual

20 lbs/9 kg (air)

WEIGHT

16 lbs/7 kg (water) 3,000 psi @ 1 gpm 1/4in JIC

OPERATING PRESSURE SIZE FITTINGS

ROV Tooling 2017 / 35

SUBSEA LOAD CELL The Seanic load cell is designed to provide accurate, reliable load readings for the lifting of subsea structures. This unit is a simple, rugged and reliable alternative to some of the other high tech options on the market.

Calibration certifications are good for one year and can be quickly recertified annually. The subsea load cell comes with 2x gauges: one 0-10000 lb calibrated and one 0-20000 lb calibrated and can be interchanged quickly.

TECHNICAL SPECIFICATIONS INSTALLS BETWEEN LIFTING LINE AND LOAD

The subsea load cell installs directly between the lifting line and load itself.

EASILY MONITORED BY AN ROV

There are no electrical or battery operated components and the load cell can be easily monitored by an ROV with the large, easy-to-read display.

NO ELECTRICAL/BATTERY OPERATED COMPONENTS

The cells are manufactured of all stainless components and are completely oil-filled so corrosion is not a problem.

WHAT’S IN THE BOX MATERIAL

316/304/17-4 SS

CAPACITY

20,000 lbs max lift

DIMENSIONS WEIGHT

12” L x 12” W x 8 1/2” D 55 lbs (air) 45 lbs (water)

CYLINDER MAX PRESSURE RATING

36 / ROV Tooling 2017

3,000 psi

+ Spare Gauge + Operating & Maintenance Manual

SUCTION CUP

STICKY FOOT

Seanic Ocean Systems designs and manufactures a suction cup sticky foot that can be built to custom sizes or suction levels to assist in station-keeping and lifting smooth-surface objects.

TECHNICAL SPECIFICATIONS SIMPLE, RUGGED DESIGN

Its high level of suction and grip ensures that an ROV will stay reliably in place when attached to smooth surfaces such as a vessel hull or pipeline.

LOW COST

The sticky foot can be deployed by the ROV manipulator or hard-mounted to the vehicle in an appropriate location for the job.

CHOICE OF ROV HANDLES

While we have a variety of sizes in stock, our sticky foot can be manufactured to custom shape or size specifications, load holding capacities, and suction levels to ensure reliable performance under any conditions your ROV may encounter.

250 mm 10,000 FSW 6061 T-6 Aluminum

SUCTION CUP BELLOWS

9 gpm @ 2,000 psi

WORKING DEPTH MATERIALS

250 gpm

HYDRAULIC INPUT REQUIREMENTS OUTPUT REQUIREMENTS

316 SS Rubber

45 lbs/20 kg (air)

Ampco 45 Ni-Al-Brz

38 lbs/18 kg (water)

Carbon steel (motor)

12” x 12” x 20”

WEIGHT

DIMENSIONS

ROV Tooling 2017 / 37

SUCTION PILE INTERFACE STAB Seanic Ocean Systems manufactures an ROV friendly suction pile stab primarily used during the installation of suction piles.

The stab is also available with a rubber flap seal option, eliminating the need for the additional hydraulic power used to iflate the bladder.

TECHNICAL SPECIFICATIONS SECURE MOORING AND ANCHOR

Our stabs can be outfitted with pressure sensors, providing more accurate feedback than gauges and reducing the risk of damage or costly pile collapse.

BUILT TO-ORDER

Our suction pile interface stabs are built to order, can be customized to any size, and are rigorously tested onshore to assure product quality and reliable performance at depth.

INFLATABLE SEAL

Seanic’s’ custom-engineered design features an optional inflatable seal to overcome common sealing problems associated with irregularly painted or corroded surfaces inside the stab interface of most suction piles. This provides a secure fit and the ability to tighten the O-ring in the event of rust or scale buildup.

MATERIALS

WHAT’S IN THE BOX

6061-T6 Aluminum body/handles Delrin nose piece 316 SS fittings

+ Spare Bladder

Buna-N rubber bladder

+ Gauge

Buna-N rubber solid seal is also available WEIGHT

45 lbs (air) 38 lbs (water)

DIMENSIONS

32 in L 13 in OD at handle

38 / ROV Tooling 2017

+ Operating & Maintenance Manual

VORTEX DREDGE KIT The most powerful 4 inch ROV and diver dredge in the world is available for rent. The Vortex has a removal rate performance more commonly seen in the 6 inch dredges. Vortex do not supply dredges as a combination jetter/dredge unit, with the belief that it is better to create the most powerful inlet suction and combine that with an actual high pressure jetter unit.

TECHNICAL SPECIFICATIONS SALVAGE/MARINE SCIENCE OPERATIONS

The low hydraulic consumption leaves enough hydraulic supply on most ROV’s to utilize a purpose built jetter unit for effective soil breakup.

WROV CONSTRUCTION AND DRILL SUPPORT

Environmental concerns are addressed through the high efficiency, low energy demand hydraulic system negating the need for external compensators.

4 IN TO 6 IN AVAILABLE

This is a completely modular system with many installation options for a variety of ROV’s. The true 4 inch performance with minimum 3.89 inch internal diameter reduces blockages and operates on a lower hydraulic flow.

WHAT’S IN THE BOX 19 gpm (minimum)

FLOW REQUIREMENTS

22 gpm (optimum)

2400 psi (minimum)

PRESSURE

4500 psi (maximum) 2800 psi (optimum)

+ www.vortexdredge.com

99 lbs / 45 kg (air)

WEIGHT

ROV Tooling 2017 / 39

MAG DRILL The drill is mounted to the metallic work site by energizing a lifting magnet using a hydraulic cylinder as the actuator. The powerful magnet holds the drill in place to perform precise cuts for the purposes of decommissioning, salvage, pinning, flooding or venting.

TECHNICAL SPECIFICATIONS HANDLES UP TO 6 IN DIAMETER CORE DRILL

Our Mag Drill is rated for 10,000 FSW and can easily cut holes into any flat or round steel structure with an annular cutter of up to 6 inches in diameter, at various depths-of-cut.

UP TO 4 1/4 IN HOLE DEPTH

This tool is custom engineered and built to meet customer specifications, and can be customized according to hole diameter and drill depth to suit project needs.

ATTACHES TO ROUND OR FLAT SURFACES

Seanic Ocean Systems designs and manufactures a Mag Drill that allows an ROV to attach a drill to any metallic subsea surface to cut holes of varying diameters.

WHAT’S IN THE BOX DRILLING

HYDRAULIC

6” (150mm) (3/4” shank) maximum diameter annular cutter Requires 3 open centered directional control valves (4 valves if using optional Slug Ejector function)

WEIGHT

201 lbs/91 kg (air) 171 lbs/77 kg (water)

40 / ROV Tooling 2017

+ Spare Annular Bits + Hoses + Spare Motor + Operating & Maintenance Manual

SUBSEA SAMPLE BOTTLE

ASSEMBLY

The Seanic Standard Sample Bottle system is a safe, simple and effective tool for gathering subsea samples. Custom configurations and interchangeable collection interfaces makes it the right choice for subsea sampling.

TECHNICAL SPECIFICATIONS CONFIGURABLE

The Subsea Sample Bottle Assembly is used to collect samples of gas bubbles/ fluid from on or near the sea floor.

SAFE AND EASY TO OPERATE

The Subsea Sample Bottle Assembly uses differential pressure to create a vacuum which will allow the gas bubbles/ fluid samples to be captured in the sample bottle subsea.

AVAILABLE FOR RENTAL OR SALE

The Subsea Sample Bottle Assembly is not intended to identify the cause of or source of the gas bubbles/ fluid at the operation site, only to collect samples in a safe and easy way for future analysis.

WHAT’S IN THE BOX + Sample Bottle Assembly + ROV Handle + Various Relief Valve Springs + Spare Funnel + Spare Flex Hose + Operating & Maintenance Manual

316 SS valve and fittings

MATERIALS

Aluminum sample bottle Flexible PVC collection tube Compressed gas: 77.7 cu-ft/2.2cu.m

BOTTLE CAPACITY

Water: 2.93 gal/11.1 L Pressure: 3000 psi

ROV Tooling 2017 / 41

DUAL FLUID HPU Seanic has designed and built a new Hydraulic Power Unit that is very unique. The use of a check ball pump and an electric motor was the difference between a standard oil HPU that can’t pump the Water Glycol and the air driven pumps usually used in this application.

TECHNICAL SPECIFICATIONS 3 STATIONS

The Dual Fluid HPU can deliver 10k and 5gpm of either water glycol or traditional mineral based oils.

EACH STATION HAS PRESSURE AND FLOW CONTROL

This unit was built to fill a demand for both hyperbaric chamber testing of ROV tooling as well as providing constant volume flow for high pressure water glycol applications.

SPECIFICATIONS

10,000 PSI @ 5 GPM 2-20 Gallon Reservoirs 4 Point Lifting Slings and Fork Pockets 230/460v/60Hz Electric Motor

DIMENSIONS

76 x 56 x 86 3800 lbs

42 / ROV Tooling 2017

WHAT’S IN THE BOX + Operating & Maintenance Manual

INTERVENTION PANEL Seanic Intervention Panels can be precision water jet cut from 316 L Stainless Steel or from Carbon Steel and painted with a 3 part epoxy process able to withstand long term subsea exposure.

TECHNICAL SPECIFICATIONS API/ISO COMPLIANT

All panels and components will be under API Guidance to ensure ROV friendliness.

SIMPLE, RUGGED, RELIABLE

Our staff has years of experience designing and building this equipment, providing you the confidence it will be done right the first time, every time.

CONFIGURABLE INTERFACE POINT FOR ROV

Seanic can custom design and manufacture ROV Intervention Panels per customer requirements. These can include Hot Stabs and Receptacles, ROV Torque Receptacles, Ball Valve Actuators and Gauges.

WHAT’S IN THE BOX 316L or Epoxy Coated Steel

+ Operating & Maintenance Manual

Varies According to Customer Requirements Hot Stab, Paddle Valve, Gauges, Torque Receptacles, LVOT Heads or Flying Leads

MATERIALS WEIGHTS & DIMENSIONS INTERFACE OPTIONS

ROV Tooling 2017 / 43

30 INCH SAW Seanic introduced the 30 inch saw to resolve cutting through a single jumper and eliminating concerns of aligning multiple cuts.

The clamp design is retroactive, so all previously purchased 20 inch Super Grinders can be added to the clamp, and is easily removed for standalone applications. The clamp portion may be used with multiple Seanic Cutting Tools including both the 30 inch and 20 inch Super Grinders as well as other cutting and drilling accessories.

TECHNICAL SPECIFICATIONS STREAMLINE CLAMP DESIGN

Through this streamlined design, the 30 inch saw provides maximum cut depth with minimal clamping support.

ROV HANDLES FOR HORIZONTAL AND VERTICAL

The clamp design holds the grinder steady ensuring straight cut and preventing blade binding in both horizontal and vertical positions.

OPTIONAL SUPPORT SHOES

Diameter range is 12 inches to 18 inches OD with adapter shoes allowing diameters as small as 4 inches.

WEIGHT

345 lbs (air)

WHAT’S IN THE BOX

280 lbs (water) DIMENSIONS FEATURES

43”W x 27 1/4”D x 78”H Clamping range of 12-18” OD Maximum cut depth of 11 1/2”

DEPTH RATING HIGH TORQUE MOTOR MAX PRESSURE MAX FLOW

Infinite depth Provides 6,000 in-lb torque 3,000 psi 20 gpm

44 / ROV Tooling 2017

+ Spares Kit + Operating & Maintenance Manual

www.seanicusa.com

A Centurion Group company

SEANIC ENGINEERED SOLUTIONS

www.seanicusa.com

A Centurion Group company

ROV SHACKLE

CUSTOM-ENGINEERED

Seanic Ocean Systems designs and manufactures a variety of hydraulic ROV actuation kits for shackles ranging from 5-500 tons for the purpose of lowering or lifting heavy equipment to or from the sea floor without cutting lifting wires.

ROV shackles adhere to DNV 2.7-1 standards to ensure compatibility for your subsea needs.

TECHNICAL SPECIFICATIONS WHAT’S IN THE BOX + Dummy Poly Stab + API 17H Hot Stabs (optional) + Hoses (optional) + Operating & Maintenance Manual

HYDRAULICALLY OPERATED

Constructed from an alloy steel and designed for simple operation through the use of an ROV manipulator, this tool enables an ROV to make or break shackle connections hydraulically when adding subsea hardware to a field, landing manifold or other subsea construction.

MECHANICAL OVERRIDE CAPACITY

Seanic’s actuation kits for shackles are built with a mechanical override capacity, in order to make or break shackles without the need for hydraulic power.

CUSTOMENGINEERED TO ORDER

Our ROV operable shackle conversions are custom-engineered according to customer specifications, and we have the ability to adapt any shackle to make it ROV-friendly.

WEIGHT (AIR)*

WEIGHT (WATER)*

DIMENSIONS*

360 lbs/163 kg

311 lbs/141 kg

50” x 14” x 25”

120T

984 lbs/446 kg

910 lbs/412 kg

64” x 14” x 30”

200T

1282 lbs/582 kg

1102 lbs/500 kg

74” x 19” x 36”

400T

*Weights and dimensions for example models shown. ROV shackles can be manufactured in sizes ranging from 5-450 T. Alloy steel; Stainless steel parts for hydraulic actuators

MATERIAL

Engineered Solutions 2017 / 47

FLEX JOINT CLEANING TOOL

ROV COMPATIBLE

The flex joint cleaning tool was designed to clamp around steel catenary risers with pipeline diameters ranging from 6 to 24 inches.

The tool is operated by a Seanic technician through the use of a joystick and tooling computer with GUI interface inside the ROV control van.

TECHNICAL SPECIFICATIONS WORKCLASS ROV COMPATIBLE

The unique deployment system of the tool allows it to be used on any industry-recognized work class ROV.

INTERCHANGEABLE TOOL TRAYS

The tool is designed with interchangeable tool trays, which provide the option to work with various inspection cameras, lasers, temperature probes and cleaning tools.

RELIABLE CLEANING AND INSPECTION

The purpose of the tool is to thoroughly clean the underside of the flex joint by removing excessive marine growth from the elastomer, allowing for optimal inspection.

APPROX WEIGHT

800 lbs/363 kg (air)

WHAT’S IN THE BOX

~ 20 lbs/9 kg (water) HYDRAULIC REQUIREMENTS

MOVEMENT

10 gpm at 3000 psi

+ Operating & Maintenance Manual

Four Open-center Directional Control Valves

+ For information regarding what is packaged with this tool, please call Seanic.

Rotates 190⁰ to 260⁰ in either direction Brush pole moves up and down and tilts forward and backward to reach corners/ transition areas Transit tray moves pole closer to or away from the riser

48/ Engineered Solutions 2017

SEA CHEST COVERS

MULTIPLE SIZES

Seanic Ocean Systems has designed and manufactured ROV-installable Sea Chest Covers in a variety of sizes, used for UWILD and for marine maintenance activities on subsea platforms. During a UWILD the external hull must be cleaned and inspected, in addition to the replacement and/or repair of internal systems inside the hull.

TECHNICAL SPECIFICATIONS ROV-FRIENDLY

Seanic’s Sea Chest Covers are used to plug the open flange during inspection and maintenance campaigns. The Sea Chest Cover operation and functionality is imperative to the successful sealing o of the internal hull while personnel and equipment are inside performing the inspection and maintenance.

DEPENDABLE SEALING

The differential pressure at the sea chest flange provides a sealing mechanism allowing for the seal face of the Sea Chest Cover to stay in place and prevent seawater from entering into the sea chest flange. Clamping mechanisms on the sea chest covers provide additional security for the connection and sealing force. An internal bladder on the sea chest is inflated using a seawater injection pump providing an internal sealing element as a secondary measure to prevent any additional seawater from entering the hull in the event of a slow failure of the primary face seal.

EFFICIENT MARINE MAINTENANCE

The design of Seanic’s Sea Chest Covers is ROV friendly, and capable of being deployed and installed efficiently. Seanic’s API 17H FLOT and Class 1-4 torque tool is used to deploy and lock the Sea Chest Cover onto the sea chest flange.

Engineered Solutions 2017 / 49

UES PRODUCTS

www.seanicusa.com 50 / UES Products 2017

A Centurion Group company

Hydraulic Power Pack

MODEL: 22kW

GENERAL DESCRIPTION



UES Standard Electric HPU



Supplied mainly for use with our large range of underwater tools, but also suitable for other applications



Primary structure manufactured in accordance with DNV 2.7‐1

TECHNICAL SPECIFICATION

Max Flow

75 l/min @ 60Hz operation

Max Pressure

320 bar @ 35 l/min 60 Hz operation

Motor

22kW WEG 4 pole 3ph 380/440v 50/60Hz

Starter

Star Delta in SS enclosure

Filtration

MP Filtri pressure, return & drain

Cooler

Bowman seawater heat exchanger

Reservoir

200 litre, low oil & high temp trips

Frame

4 point lift in accordance with DNV 2.7‐1

Dimensions

1492 x 800 x 1615 mm

Weight

1,000 kg

Certification

Full certification package for MPI, slings, shackles & load test

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

UES Products 2017 / 51

ATEX Zone 1 Hydraulic Power Pack

MODEL: Z1 36kW

GENERAL DESCRIPTION



UES ATEX Zone 1 Electric Hydraulic Power Unit



Supplied mainly for use with our large range of underwater tools, but also suitable for other applications



Primary frame manufactured in accordance with DNV 2.7‐1

TECHNICAL SPECIFICATION

Max Flow

140 l/min @ 145bar, 60Hz operation

Max Pressure

320 bar @ 50 l/min 60 Hz operation

Motor

36kW WEG Ex II 2G EEx d IIB T4 4 pole 3ph 380/440v 50/60Hz

Starter

Star Delta in Ex II 2GD EEx d II B T5 enclosure

Filtration

Ikron pressure, return & drain

Cooler

Bowman seawater heat exchanger

Reservoir

300 litre, low oil & high temp trips

Frame

4 point lift in accordance with DNV 2.7‐1

Dimensions

1650 x 900 x 1870 mm H

Weight

1,500 kg

Certification

Full certification package for MPI, slings, shackles & load test

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

52Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

Hydraulic Cut‐Off Saw

MODEL: C023

GENERAL DESCRIPTION



High powered saw designed for dimensional cutting of metal or masonry materials



Suitable for cutting concrete, structural steel and pipe



10” Abrasive, Diamond or TCT wheel can be fitted



Fitted with an adjustable shoe to allow alterations to cut depth

TECHNICAL SPECIFICATION

Capacity

10” Disc

Arbor

1”

Flow

38‐57 L/min

Pressure

105‐140 Bar

Weight

10.4kg

Length

495mm

Width

280mm

Porting

8 SAE

Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

UES Products 2017 / 53

Hydraulic Shear Cutter

MODEL: CAT S80

GENERAL DESCRIPTION



Ideal for cutting pipe, flexible risers, cables & umbilical



Suitable for topside & subsea operations

TECHNICAL SPECIFICATION

Model

Caterpillar S 80

Jaw Opening Height

623 mm

Jaw Opening Depth

840 mm

Base of Jaws Height

525 mm

Max Flow

200 L/min

Max Pressure

350 Bar

Frame

4 point lift in accordance with DNV 2.7‐1

Dimensions

4800 x 1500 x 2400 mm H

Weight

6000 kg. 8000kg w/ frame

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

54Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

3.5Te Demag Peel Grab

GENERAL DESCRIPTION



Suitable for all coarse and bulky materials



Hydraulic arms are individually driven, thereby ensuring that even the bulkiest material is securely gripped



Designed to handle a variety of different bulk materials such as scrap, waste, rock, slag and logs



Grab can be operated from a standard HPU and powered Umbilical reel

TECHNICAL SPECIFICATION

Arm Capacity

0.8m3

Payload

3.5T

Weight

920 kg

No. of Arms

4

Pressure

200 bar

Height closed

1885 mm

Height open

1575 mm

Width closed

1610 mm

Width open

2420 mm

Tools supplied as standard with whips and Industry Standard ¾” Wing type Q.D. Couplings

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

UES Products 2017 / 55

Diver Torque Tool

MODELS: KIS17D4

GENERAL DESCRIPTION



Basic Rotary Torque Tool conforming to API 17D Class 1‐4



Robust, no frills tool operable by diver with a suitable hydraulic supply



Direction control valve is close mounted to the torque tool and cross line relief valves are incorporated to allow torque setting in both CW and CCW rotation

TECHNICAL SPECIFICATION

Interface

Class 1‐4

Max Torque

2,700 Nm

Speed

0 ‐ 20 rpm

Flow

0 – 25 l/min

Pressure

175 bar Max

Weight

26kg (in water)

Dimensions

675 x 220 x 300 mm H

Handle

Front and rear w/lift point

Porting

1/2” BSP

Tools may be supplied and used in conjunction with UES Torque Manifold and Torque Verification Unit. Supplied as standard c/w 1.5m whips and ¾” Q.D. Couplings

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

56Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

Hydraulic Grinder

MODEL: GR29

GENERAL DESCRIPTION



Portable hand held tool, designed for use by a diver or ROV



Primarily used for grinding and cutting operations



Suitable with various discs; Abrasive, Diamond, and Polishing Discs



Can also be fitted with Wire & Nylon brushes

TECHNICAL SPECIFICATION

Capacity

7” or 9” Disc

Speed

2700 rpm

Arbor

5/8” UNC

Flow

15‐38 l/min

Optimum Flow

34 l/min

Pressure

70‐175 bar

Weight

6.8 kg

Length

230 mm

Width

230 mm

Porting

8 SAE

Tool supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

UES Products 2017 / 57

Hydraulic Reel

MODEL: HR300

GENERAL DESCRIPTION



Primarily used to deploy hoses, cables & umbilicals for subsea operations



Can be fitted with a twin flow rotary union to power subsea hydraulic tools

TECHNICAL SPECIFICATION

Capacity

300 m Twin Hose Umbilical

Max Pull

1000 kg

Flow

15 – 60 l/min

Pressure

200 bar

Connection

6 m hoses c/w Q.D. Couplings

Drum Dimensions

Core

800 mm

Flange

350 mm

Width

800 mm

Dimensions

Length

1770 mm

Width

1770 mm

Weight

1500 kg Tare, 3000 kg Gross

Certification

Full certification package for hose test, MPI, slings, shackles & load test

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

58Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

5Te Peel Grab

GENERAL DESCRIPTION



Suitable for all coarse and bulky materials



Hydraulic arms are individually driven, thereby ensuring that even the bulkiest material is securely gripped



Designed to handle a variety of different bulk materials such as scrap, waste, rock, slag and logs



Grab can be operated from a standard HPU and powered Umbilical reel

TECHNICAL SPECIFICATION

Arm Capacity

0.2m3

Payload

5T

Weight

600 kg

No. of Arms

5

Pressure

200 bar

Height closed

1500 mm

Height open

1280 mm

Width closed

900 mm

Width open

1500 mm

Tools supplied as standard with whips and Industry Standard ¾” Wing type Q.D. Couplings

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

UES Products 2017 / 59

Hydraulic Peanut Grinder

MODEL: PG04

GENERAL DESCRIPTION



Portable hand held tool, designed for diver use



Primarily used for grinding weld seams and de‐burring holes in steel work



Can additionally be fitted with rotary wire brushes and a variety of abrasive and polishing discs



Can also be adapted for ROV application

TECHNICAL SPECIFICATION

Speed

9450 rpm

Arbor

6 mm Collet

Flow

15‐40 l/min

Pressure

70‐175 bar

Weight

4 kg

Length

350 mm

Width Nose

65 mm

Width Body

91 mm

Porting

8 SAE

Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings.

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

60Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

Wire Rope Cutter

MODEL: RCV75HD

GENERAL DESCRIPTION



Heavy duty wire cutter designed for use in severe working conditions



Hydraulically operated anvil for easy ROV deployment



Lightweight aluminium construction



Integrated interlock ensures that the blade cannot activate until the anvil is fully deployed



Long life blade ensures that tool maintenance is kept to a minimum



Integrated hydraulic intensifier and internal relief valve

TECHNICAL SPECIFICATION

Cutting Capacity (Wire Rope)

75 mm Dia. & 1960 N/mm2 grade

Water Depth

Any

Max Input Pressure

210 bar

Weight Approx.

43 kg

Height

517 mm

Width

176 mm

Length

390 mm (max, anvil out)

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

UES Products 2017 / 61

Wire Rope Cutter

MODEL: RCV115

GENERAL DESCRIPTION



Heavy duty wire cutter designed for use in severe working conditions



Hydraulically operated anvil for easy ROV deployment



Robust plated steel and stainless steel construction



All steel components are electroless nickel plated to resist corrosion



Long life blade ensures that tool maintenance is kept to a minimum



Suitable for wire rope, cables and umbilicals



Optional intensifier panel is available

TECHNICAL SPECIFICATION

Cutting Capacity (Wire Rope)

115 mm Dia. & 1770 N/mm2 grade

Water Depth

Any

Max Input Pressure Main Cylinder

690 bar

Max Input Pressure Anvil

210 bar

Height

703 mm

Width

252 mm

Max Length (Anvil Out)

514 mm

Weight (Approx)

125 kg

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

62Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

Wire Rope Cutter

MODEL: RCV155

GENERAL DESCRIPTION



Heavy duty wire cutter designed for use in severe working conditions



Hydraulically operated anvil for easy ROV deployment



Robust plated steel and stainless steel construction



All steel components are electroless nickel plated to resist corrosion



Long life blade ensures that tool maintenance is kept to a minimum



Suitable for cutting wire rope, cables & umbilical



Optional intensifier panel is available

TECHNICAL SPECIFICATION

Cutting Capacity (Wire Rope)

155 mm Dia. & 1880 N/mm2 grade

Water Depth

Any

Max Input Pressure Main Cylinder

690 bar

Max Input Pressure Anvil

210 bar

Height

867 mm

Width

277 mm

Length (Max)

592 mm

Weight (Approx)

240 kg

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

UES Products 2017 / 63

ROV Chain Caliper MK3

GENERAL DESCRIPTION



Unique hydraulically controlled chain caliper, designed to measure one chain link length.



Lightweight aluminium construction mounted with sheet buoyancy. Supplied complete with digital displacement readout.



Features an adjustable fixed arm, and a range of dynamic arm options, offering a 200mm measurement range for chain link lengths of 600 to 1100mm.



Vertical members of the tool engage over the link diameters first, up to a 180mm max. chain diameter. A range of horse shoe pads can be supplied to engage against smaller diameter chain.

TECHNICAL SPECIFICATION

Range

600-1100 mm (200mm increments)

Tool Accuracy

+/- 0.3 mm

Max. Chain Dia.

180 mm

Weight in Air

42 kg

ROV Handle

Fish tail and flex joint

Max Pressure

30 bar

Max Force

0.4 Te

Hydraulic Interface

4m hose c/w 4JIC ends (alternative end fittings AOR).

Instrument Interface

Supplied with Micro Subconn c/w voltage network

UES Ltd. can also supply a range of Go NoGo Gauges for reference chain diameter & interlink measurement, please contact us to discuss your requirements.

ATR EQUIPMENT SOLUTIONS

ATR LIFTING SOLUTIONS

ATR MARINE SOLUTIONS

ATR POWER SOLUTIONS

+44 (0)1224 222777 equipment@atrgroup.co.uk

+44 (0)1224 826662 lifting@atrgroup.co.uk

+44 (0)1224 826662 marine@atrgroup.co.uk

+44 (0)1224 775050 power@atrgroup.co.uk

Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL 64Underwater / UES Engineering Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

Subsea Drill Rig MODEL: SDR100

GENERAL DESCRIPTION



Ideal for drilling holes of up to 100mm diameter in steel structures



Easily adapted to mount onto steel beams and tubular members



Can be secured via clamps, straps or magnets, with various bases to suit a range of applications



Fitted with manual down‐feed and has a spring‐centred control valve for added operator safety

TECHNICAL SPECIFICATION

Capacity

100 mm Dia

Speed

50‐250 rpm

Arbor

¾” Dia

Flow

0‐35 l/min

Pressure

70‐175 bar

Length

440 mm

Width

230 mm

Height

540 mm

Porting

½” BSP

Weight

25kg

Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings.

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

UES Products 2017 / 65

Softline Cutter

MODEL: SL55

GENERAL DESCRIPTION



Compact & lightweight tool designed to cut soft lines, polypropylene and fibre ropes



Utilises a low pressure supply from the vehicle, eliminating the need for a high pressure intensifier



Constructed from stainless steel and coated alloys to provide the optimum level of light weight and corrosion resistance

TECHNICAL SPECIFICATION

Capacity

54 mm Dia

Pressure

210 bar

Weight

4.52 kg

Length

410 mm

Width

150 mm

Depth

44 mm

Porting

¼” BSP

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

66Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

Softline Cutter

MODEL: SL80

GENERAL DESCRIPTION



Heavy duty hydraulically operated soft and fibre line cutting tool



Lightweight aluminum & stainless steel construction



Diver or ROV operable design



Available with detachable handle kit

TECHNICAL SPECIFICATION

Capacity

80 mm Dia

Pressure

690 bar

Weight

14.2 kg

Length

647 mm

Width

188 mm

Depth

138 mm

Porting

¼” BSP

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

UES Products 2017 / 67

Spitznas Angle Grinder

MODEL: 5” AG

GENERAL DESCRIPTION



Portable, handheld tool for diver use



Ideal for use in tight spaces



Can be adapted for ROV application

TECHNICAL SPECIFICATION

Operating Pressure

90‐140 Bar

Working Pressure

90 Bar

Capacity

1.8 kW

Displacement

20‐50 l/min

Free Speed

5500 ± 5% U/min

Peripheral Speed Max

52.2 m/s

Max Disc Size

180mm

Holder and Thread

22.2mm Dia. M14

Dimensions

570 x 250 x 150 mm

Weight (without holder & protecting disc)

6.7 kg

Weight (total)

7.6 kg

Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

68Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

Hydraulic Recip Saw

MODEL: Spitznas

GENERAL DESCRIPTION



An alternative to rotary disc cutters, suitable for a variety of materials



Various pitch and length of blades can be offered depending on the hardness & size of the material



Pipe clamps and other purpose built clamps can be supplied to aid cutting operations



Twist & lever throttle options available

TECHNICAL SPECIFICATION

Capacity

290mm Dia

Power

2.8Kw

Flow

15‐50 l/min

Pressure

140 bar

Strokes/min

350

Stroke

60 mm

Weight

6.1 kg

Length

600 mm

Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

UES Products 2017 / 69

Hydraulic Breakers

MODEL: BR45 & BR67

GENERAL DESCRIPTION



Medium to heavy‐duty breaker



Ideal for breaking concrete and small rocks, rod diving and tamping



Well balanced tool for minimum operator fatigue



Trouble‐free diaphragm accumulator provides added punch and reduced coil



Feathering on/off valve to control speed makes startup and initial tool placement more reliable



A variety of breaker points available; flat, moil & spade.

TECHNICAL SPECIFICATION

BR45

BR67

Capacity

1 in Hex Parallel

6” x 1 ¼” Hex

Weight

25 kg

30 kg

Length

65 cm

68 cm

Width

36 cm

40 cm

Pressure

105‐140 bar

105‐140 bar

Max Back Pressure

17 bar

17 bar

Flow Range

26‐34 l/m

26‐34 l/m

Optimum Flow

30 l/m

30 l/m

Porting

8 SAE

8 SAE

Output

1800 Blows/min

1800 Blows/Min

Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings.

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

70Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

Stanley Chipping Hammer MODEL: CH15

GENERAL DESCRIPTION



Portable hydraulic chipping hammer



Ideal for chipping concrete, rock, masonry or coral



Compact, lightweight and powerful with a shock & heat insulated body

TECHNICAL SPECIFICATION

Capacity

0.58” x 2 ½” shank steel bits

Flow

26‐34 l/min

Pressure

70‐140 bar

Weight

7.25 kg

Length

430mm

Width

80mm

Porting

8 SAE

Tool Steels

Wide chisel, Moil point, Flat chisel

Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

UES Products 2017 / 71

Stanley Hydraulic Drill

MODEL: DL07

GENERAL DESCRIPTION



Powerful, lightweight, portable hydraulic drill completely sealed for underwater operation



The drill features a reverse facility



Compatible with a range of drill bits up to 18mm Dia.



Fitted with a trigger guard and a dual position assist handle

TECHNICAL SPECIFICATION

Capacity

½” Chuck

Speed

350‐1500 rpm

Torque

27 Nm

Flow

15‐45 l/min

Pressure

70‐140 bar

Weight

3.6 kg

Length

230 mm

Width

100 mm

Porting

8 SAE

Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

72Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

Hydraulic Impact Wrench

MODEL: IW12

GENERAL DESCRIPTION



Hand held tool designed for use by a diver or ROV



Provides exceptional output torque from a compact & lightweight tool

TECHNICAL SPECIFICATION

Capacity

¾” Square Drive

Torque

340‐1630 Nm

Flow

15‐45 l/min

Optimum Flow

30 l/min

Pressure

70‐140 Bar

Weight

6 kg

Length

240 mm

Width

102 mm

Porting

8 SAE

Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

UES Products 2017 / 73

Hydraulic Impact Wrench

MODEL: IW16

GENERAL DESCRIPTION



Hand held tool designed for use by a diver or ROV



Provides exceptional output torque from a compact & lightweight tool

TECHNICAL SPECIFICATION

Capacity

1” Square Drive

Torque

680‐3400 Nm

Flow

25‐45 l/min

Optimum Flow

30 l/min

Pressure

105‐140 Bar

Weight

12 kg

Length

370 mm

Width

110 mm

Porting

8 SAE

Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

74Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

Subsea Torque Verification Unit MODEL: Subsea TVU

GENERAL DESCRIPTION



Used to confirm operational output from any Rotary Torque Tool conforming to API 17D Class 1‐4 or 17H Hi‐ Torque



Consists of high accuracy torque transducer mounted within a standard Class 1‐4 or Hi‐Torque receptacle



Electronic output from this unit is fed to a 5 digit LED hi visibility display



Rugged housing deep water rated (3000m)

TECHNICAL SPECIFICATION

Interface

API 17D Class 1‐4 or API 17H Hi‐Torque

Max Torque

2,700 Nm

Input Adaptors: Class 1 & 2

17.5 mm Square

Class 3

28.6 mm Square

Class 4

38.1 mm Square

17 H

35.0 mm Square

Weight

37 kg

Length

370 mm

Width

500 mm

Height

550 mm

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

UES Products 2017 / 75

Twin Disc Cutter

MODEL: TDC125

GENERAL DESCRIPTION



Diver or ROV operable



Specifically designed to cut large diameter cable, hauser, wire rope and other materials with ease



Twin discs result in reduced cutting times, increased disc life and safe operation

TECHNICAL SPECIFICATION

Max Cut Dia.

125 mm

Max Speed

4000 rpm

Flow

34 l/min

Pressure

210 bar

Weight

14.7 kg

Length

550 mm

Width

500 mm

Depth

250 mm

Mounting

‘T’ bar or Fishtail

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

76Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

Turns Count & Torque Readout MODELS: TC1 & TC2

GENERAL DESCRIPTION



Used in conjunction with a UES Torque Tool and displays the number of turns +/‐ made by the Torque Tool output drive socket, and in addition TC2 displays output torque



Stand‐alone units, and installation does not require complex control system or datalink



Inbuilt light sensors actuate the display when illuminated by ROV or diver light, allowing the instrument to lay dormant when not required, increasing battery life

TECHNICAL SPECIFICATION

Display

5 Digit (14mm) LED +/‐ 999.9

Depth Rating

3,000 m

Battery

Rechargeable NiMh D cell

Activation

Light sensor

Count reset

Magnetic reed switch

Length

200 mm

Width

80 mm

Body Dia.

50 mm

Weight

1.6 kg (Air), 1.1 kg (Water)

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

UES Products 2017 / 77

Hydraulic Cutter

MODEL: UHC38

GENERAL DESCRIPTION



Hydraulic, double acting anvil cutter suitable for cutting wire rope, cables & hoses



Target material is placed in the open jaw of the cutter



Hydraulic pressure supplied from a separate source (ROV or deck HP Pack)



Capable of supplying pressure up to 700 bar, with a 0.5 l/min flow applied to complete the cutting operation

TECHNICAL SPECIFICATION

Max Cutting Capacity

38 mm

Wire Rope

38 mm

Height

327 mm

Width

100 mm

Depth

130 mm

Cyl. OD

82 mm

Operating Pressure

700 bar

Swept Volume

145 cc

Approx. Weight

15.2 kg

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

78Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

Hydraulic Cutter

MODEL: UHC80

GENERAL DESCRIPTION



Hydraulic, double acting anvil cutter suitable for cutting wire rope, cables & hoses



Target material is placed in the jaw of the cutter and the anvil pin Is then inserted, retaining the material



Hydraulic pressure is supplied from a separate source, typically a deck mounted HPU



A supply pressure of 700 bar and flow of 0.5 l/min is applied to complete the cutting operation

TECHNICAL SPECIFICATION

Operating Pressure

700 bar

Max Cutting Capacity

Ø80 mm

Wire Rope

Ø75 mm

Swept Volume

510 cc

Approx Weight

42 kg

Length

416 mm

Outer Diameter

174 mm

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

UES Products 2017 / 79

10Te Vantec Grab

GENERAL DESCRIPTION



Suitable for all coarse and bulky materials



Hydraulic arms are individually driven, thereby ensuring that even the bulkiest material is securely gripped



Designed to handle a variety of different bulk materials such as scrap, waste, rock, slag and logs



Grab can be operated from a standard HPU and powered Umbilical reel

TECHNICAL SPECIFICATION

Arm Capacity

3.0m3

Payload

10,000 kg

Weight

3,800 kg

No. of Arms

6

Pressure

200 bar

Flow

40‐80 l/min

Height open

2700 mm

Height closed

3360 mm

Width open

4180 mm

Width closed

2360 mm

Tools supplied as standard with whips and Industry Standard ¾” Wing type Q.D. Couplings

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

80Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

Hydraulic Shear Cutter

MODEL: VHS60

GENERAL DESCRIPTION



Ideal for cutting pipe, flexible risers, cables & umbilical



Suitable for topside and subsea operations

TECHNICAL SPECIFICATION

Model

Verachtert VSHS60

Jaw Opening Height

800 mm

Jaw Opening Depth

830 mm

Base of Jaws Height

718 mm

Max Closing Force

9850 kN

Optimum Flow

400 l/min

Max Pressure

350 bar

Frame

4 point lift in accordance with DNV 2.7‐1

Dimensions

4780 x 1500 x 1912 mm H

Weight

6500 kg

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

UES Products 2017 / 81

12 Te Tensioner

GENERAL DESCRIPTION



Purpose built to provide a constant tension capability with up to a 12 Ton maximum back tension



Correct spooling procedures prolongs life of umbilical and reduces risk of damage during operations



Operated from a control panel mounted on the unit



Power is supplied from a Hatz Silent Pack diesel engine making the tensioner a standalone system

TECHNICAL SPECIFICATION

Max Back Tension

12T

Max Line Speed

20 m/min

Drum Size

1800 OD x 500 mm Wide

Hydraulic Power Unit

Hatz 44.1kW Diesel, Tandum Dowty Gear Pumps, Air Blast & Seawater Coolers

Controls

Local Directional Control Valve & Tension Control Circuit

Operating Monitoring

Digital Readouts for Cable Tension, Speed & Length

Frame

Welded Universal Column skid, c/w lift points, fork pockets and tiedown weld plates

Overall Dimensions

4000 x 2000 x 2350 mm H

Weight

7500 kg

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

82Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

Accumulator ER System MODEL: AER75

GENERAL DESCRIPTION



Designed to provide hydraulic power and control for Hydraulic Cutter during “Black Ship” situations



Quickly and effectively supplies power up to 630 bar to operate release mechanisms



Features built in 7.5 kW HPU



75L accumulator capacity

TECHNICAL SPECIFICATION

Electrical Supply

7.5 kW, 440 V

Accumulator Capacity

75 litres

Charge Pressure

300 bar

Intensifier Ratio

4:1

Max Outlet Pressure

630 bar

Length

1226 mm

Width

1020 mm

Height

1510 mm

Weight

900 kg Gross

ATR EQUIPMENT SOLUTIONS

ATR LIFTING SOLUTIONS

ATR POWER SOLUTIONS

+44 (0)1224 222777 equipment@atrgroup.co.uk

+44 (0)1224 826662 lifting@atrgroup.co.uk

+44 (0)1224 775050 power@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

SAFETY & TECHNICAL HYDRAULICS LIMITED +44 (0)1224 781555 sales@sthyd.com

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

UES Products 2017 / 83

Hydraulic A‐Frame

GENERAL DESCRIPTION



UES Hydraulic Powered A‐Frame



Configured to suit a variety of applications depending on requirements



Complete with integrated control panel



Full deployment package with HPU & Winches available on request

TECHNICAL SPECIFICATIONS

SWL

4000kg

Approx. Weight

2500kg

Approx. Dimensions Length

4700mm

Width

2200mm

Height (stored)

2900mm

Height (max)

4300mm

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

84Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

Hydraulic Power Pack

MODEL: Hatz 45kW

GENERAL DESCRIPTION



Diesel hydraulic power pack



Supplied mainly for use with our large range of underwater tools, also suitable for other applications

TECHNICAL SPECIFICATION

Max Flow

130 l/min @ 1800 rpm 145 l/min @ 2000 rpm

Max Pressure

320 bar

Pump

Kawasaki K3VL80/B‐1NRKM‐P0/1‐H4 80cc/rev variable displacement, pressure and torque control

Motor

Hatz –M4L air cooled diesel 1500/2000 rpm

Starter

12v Electric

Filtration

MP Filtri pressure, Stauff return & suction

Cooler

Bowman seawater heat exchanger

Reservoir

300 litre, level temperature gauge

Fuel Tank

200 litre (244g/kWh @ 50% consumption)

Frame

Steel channel base, box section corner posts, 4 point lift

Dimensions

1900 x 1000 x 1400 mm h

Weight

1800 kg wet

Certification

Full certification package for MPI, slings, shackles & load test

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

UES Products 2017 / 85

ROV Sheave

MODEL: DS780‐10

GENERAL DESCRIPTION



Designed for the safe over‐boarding of cables, hoses & umbilicals



Standard design incorporates top rollers to ensure that the product is securely captured within the sheave



Support frame available for deck installation

TECHNICAL SPECIFICATION

Line Pull

10,000 kg

Bend Radius

780 mm

Max Diameter

50 mm

Height Diameter

1610 mm

Radius To Inner Sheave

780 mm

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

2097 mm

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

86Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

Electric Powered Reel

MODEL: HR300E

GENERAL DESCRIPTION



Primarily used to deploy air, hydraulic or Broco service umbilicals for subsea operations



If required, can be fitted with a twin flow rotary union or electrical slipring



Inverter controlled electrical drive provides a step‐less variable speed operation

TECHNICAL SPECIFICATION

Capacity

300 m Twin Hose Umbilical

Max Pull

750 kg – (600kg) continuous

Line Speed

20 m/min

Drive

5 kW Inverter Drive

Supply

415/440 V, 50/60Hz

Drum Dimensions

Core

800 mm

Flange

350 mm

Width

800 mm

Dimensions

Length

1770 mm

Width

1770 mm

Weight

1500 kg Tare, 3000 kg Gross

Control

Manual Joystick

Certification

Full certification package for hose test, MPI, slings, shackles and load test

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

UES Products 2017 / 87

Hydraulic Hole Punch

MODEL: HD07

GENERAL DESCRIPTION



Ideal for subsea use to make holes for bolts & shackles in shape steel, flat plates etc.



Provides a safe, diver friendly alternative to drilling holes

TECHNICAL SPECIFICATION

Operating Pressure

700 bar

Max Throat Depth

70 mm

Max Punching Thickness

16 mm Mild Steel 6 mm Stainless Steel

Max Punching Diameter

24 mm

Hole Marking Time

11.8 Seconds

Allowable Max Pressure

68.65 MPa (700kgf/cm2)

Max Output

464 kN (47tF)

Ram Stroke

25 mm

Mass (Weight)

25.5 kg

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

88Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

Hydraulic Cutter

MODEL: HGC200

GENERAL DESCRIPTION



Portable cutter, ideal for steel sections, power cables and umbilical



Designed for use on deck or subsea



Powered directly from a high pressure power pack or from a pressure intensifier



Ideal for rapid abandonment cutting (DP Run‐off) when used with a UES Accumulator package

TECHNICAL SPECIFICATION

Cutting Force

220 Te

Working Pressure

700 Bar

Max Blade Opening

205mm

Dimensions

677 x 264 x 1015mm

Weight

300kg

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

UES Products 2017 / 89

HPU & Reel GENERAL DESCRIPTION



Hydraulic deployment reel featuring built in 15kW Hydraulic Power Unit



Primarily used for deployment of hoses, cables & umbilicals for subsea operations



Can be fitted with twin flow rotary union to power subsea hydraulic tooling, using built in HPU

TECHNICAL SPECIFICATION

Capacity

300m Twin Tooling Umbilical

Max Pull

1000 kg

Flow

15-60 l/min

Pressure

200 bar

Drum Core Dia.

800mm

Drum Flange Dia.

1500mm

Drum Width

800mm

HPU Motor

15kW Motor WEG 4 pole, 3ph, 380/440v 50/60Hz Motor

Starter

Star Delta in SS Enclosure

Cooler

Bowman Seawater Heat Exchanger

Reservoir

200 L, low oil & high temp trips

Frame

Welded steel channel skid, box section protection frame, c/w forklift pockets, tie-down plates & 4 point lift in accordance with DNV 2.7-1

Frame Dimensions

1770 x 1770 x 1880(H) mm

Weight

~ 3700kg (Gross)

Certification

Full certification package for MPI, slings, shackles, load test & hosing supplied as standard

ATR EQUIPMENT SOLUTIONS

ATR LIFTING SOLUTIONS

ATR MARINE SOLUTIONS

ATR POWER SOLUTIONS

+44 (0)1224 222777 equipment@atrgroup.co.uk

+44 (0)1224 826662 lifting@atrgroup.co.uk

+44 (0)1224 826662 marine@atrgroup.co.uk

+44 (0)1224 775050 power@atrgroup.co.uk

Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL 90Underwater / UES Engineering Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

Husqvarna Cut Off Saw MODEL: K2500

GENERAL DESCRIPTION



Portable hand held tool



Lightweight, powerful and easy to manoeuvre, ensuring ease of operation



Can be used with Diamond or Abrasive discs

TECHNICAL SPECIFICATION

Speed

4300 rpm

Power

5.2 kW

Disc Size

400 mm

Disc Type

Diamond or Abrasive

Cutting Depth

145 mm

Flow

35‐42 l/min

Pressure

130‐140 bar

Weight

8.3 kg

Length

770 mm

Width

175 mm

Porting

¼” BSP

Tool supplied as standard with 1.5m whips and S/S fittings

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

UES Products 2017 / 91

Intensifier Panel

MODEL: HP690A40

GENERAL DESCRIPTION



Uses industry standard MiniBooster intensifier and is of a robust compact design for easy installation into an ROV



Fitted with an integrated safety circuit that automatically bleeds excess pressure, due to temperature or depth variations, back to tank



Inlet and Outlet pressures can be accurately monitored and the outlet is fitted with a factory set relief valve for added safety

TECHNICAL SPECIFICATION

Max Outlet

690 Bar

2 LPM

Max Input

172 Bar

14 LPM

Intensifier Ratio

4:1

Water Depth

Any

Dimensions

252 x 153 x 144 mm

Weight in air

10 kg

Weight in water

7 kg

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

92Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

Drum Spooler

GENERAL DESCRIPTION



Suitable for spooling wire/umbilical bundles onto winches and cranes under tension



Up to 3T back tension



Integrated diesel hydraulic power unit



May also be used to spool onto storage drums

TECHNICAL SPECIFICATION

Max Drum Capacity

3200 mm

Max Drum Dia.

2500 mm

Max Drum Width

30 te

Max Payload

Max Drum Torque

36kNm

Max Back Tension

3T

Shaft Size

120 mm Dia.

Integral HPU

Perkins Diesel, David Brown Pump, Pall Pressure Filter, Air Blast & Seawater Coolers.

210 bar, 80 l/min

Controls

Directional Control Valve, Tension Control Circuit, Optional Spooler Guide Frame control circuit

Frame

Welded Universal Column skid, c/w lift points, fork pockets and tiedown weld plates

Overall Dimensions

5000 x 2400 x 2110 mm H

Weight

7000 kg

Certification

Full certification package is supplied for the unit, in accordance with all current legislative standards

(3350 mm H drum filled)

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

UES Products 2017 / 93

Large Hydraulic Reel MODEL: Hagglund

GENERAL DESCRIPTION



Suitable for handling hose umbilical bundles and cables for many applications



Drum can be split to allow installation of various bundles

TECHNICAL SPECIFICATION

Drum Dimensions

Core 1067 mm Dia. Flange 2275 mm Dia. Drum Width 1650 mm

Hydraulics

Max Pressure 210 bar Flow up to 80 l/min (7rpm)

Max Line Pull

5000 kg

Motor/Brake

Hagglund, 11084cc/rev, HD62‐111000‐A0‐R0‐00‐00

Control

Walvoil SD 18/2 Motor Spool spring centred. Relief valve set to 110 bar (3te)

Rotary Union

Optional – Slew ring bearing 340 mm ID

Couplings

Supply & Return 1” Parker 61 Series, Drain ½” ISO7241B

Frame

Welded steel Channel skid, Box section top lifting frame – Pad eyes x 4

Dimensions

3100 x 2450 x 2700 mm H

Weight

6500 kg Tare, 10,000kg Gross

Certification

Full certification package for hose test, MPI, slings, shackles & load test

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

94Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

Magnum Core Drill

MODELS: 5, 10 & 15

GENERAL DESCRIPTION



Hand held drill provides unrivalled power for both wet and dry diamond drilling applications



Built in torque limiting valve results in little or no kickback or snatch

TECHNICAL SPECIFICATION

Capacity

100 mm Dia.

Flow

20 l/min

Working Pressure

140 Bar

Operating Speed

Mag 5 – 600 rpm Mag 10 – 1000 rpm Mag 15 – 1500 rpm

Weight

8 kg (without core bit)

Length

410 mm (without core bit)

Noise Level

83 dB Free running at 1m

Core bit connection

½” BSP Female

Options

Water Flush Swivel

Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

UES Products 2017 / 95

Marine Cleaning Tool

MODELS: MC212

GENERAL DESCRIPTION



Diver operated twin brush cleaning tool



Unique design means it is equally efficient on both tubular and flat surfaces



A wide variety of brushes are available to cater for different types of marine growth



Can be configured for ROV application

TECHNICAL SPECIFICATION

Flow

40 l/min

Pressure

140 bar

Weight in Air

23 kg

Weight in Water

1 kg Buoyant

Depth Rating

70 m

Min. tube Dia.

450 mm

Dimensions

800 x 450 x 250 mm H

Max Brush Dia.

300 mm

Tools supplied as standard with 1.5m whips and Industry Standard ¾” Wing type Q.D. Couplings

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

96Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

Melcal Marine Crane

MODEL: FL35T5

GENERAL DESCRIPTION



Ideal for installation on deck, on offshore vessels and platforms



Driven by an electro‐hydraulic power unit



Compact design, mounted on a dedicated subframe grillage



Designed and manufactured in accordance with Lloyd’s lifting appliances in a marine environment

TECHNICAL SPECIFICATION

Capacity

1.28Te at 14.5m

Hydraulic Reach

14.5m

Length Stowed

2.95m

Height Stowed

3.01m

Base Footprint

2.43m x 2.43m

Winch

2 Te

Max Reach

14.5m @ 1.25Te

Controls

Local & Radio Remote

Hydraulic Power

37kW, 270 bar

Slewing Angle

Continuous

Weight

6000kg

Certification

Full certification package for MPI, slings, shackles, load and pull test

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

UES Products 2017 / 97

Roller Chute

MODEL: RC700

GENERAL DESCRIPTION



Designed for the safe over‐boarding of cables, hoses & umbilical

TECHNICAL SPECIFICATION

Radius

700mm

Load Capacity

3000kg

Length

1310mm

Width

405 B/Flanges

Weight

600kg

Mounting

Weld Plates

Certification

Full certification package provided

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

98Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

Roller Sheave

MODEL: RDS 808‐2

GENERAL DESCRIPTION



Designed for the safe overboarding of cables, hoses and umbilical

TECHNICAL SPECIFICATION

Line Pull

2000 kg

Bend Radius

800 mm

Max Diameter

80 mm

Sheave Length

1567 mm

Sheave Height

828 mm

Sheave Thickness

218 mm

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

UES Products 2017 / 99

Dirty Work Pack GENERAL DESCRIPTION

•

Dirty work pack base unit housing a Dynaset 520

•

Entirely flexible configuration, options include : 5 station 485 solenoid valve pack 3 Station pilot operated valve pack Internal or external comps

TECHNICAL SPECIFICATION

Hydraulic Supply

30 l/min at 520 bar max

Accumulator Capacity

P.O.A.

Output Pressure

520 bar max

Max output flow

30 l/pm

Frame

All stainless assembly

Dimensions

804 x 600 x 200

Weight

26 kg , buoyancy available

Certification

Full certification package for hose test, MPI, slings, shackles and load test

ATR EQUIPMENT SOLUTIONS

ATR LIFTING SOLUTIONS

ATR MARINE SOLUTIONS

ATR POWER SOLUTIONS

+44 (0)1224 222777 equipment@atrgroup.co.uk

+44 (0)1224 826662 lifting@atrgroup.co.uk

+44 (0)1224 826662 marine@atrgroup.co.uk

+44 (0)1224 775050 power@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL 100 / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

Hydraulic Winches

MODEL: SONAR WINCH

GENERAL DESCRIPTION



Suitable for handling ropes and cables for many applications



Max cable diameter 30mm



Complete with integrated Hydraulic Power Unit

TECHNICAL SPECIFICATION

Drum Dimensions

508mm Dia. Core 760mm Dia. Flange 1036mm Width 55kW Electric; 380/415/440v ph3 50/60Hz 4 pole, WDF250MH Vickers Hydraulic Pump, PVH98QIC‐RSF‐IS‐10‐C25V‐31 Reservoir capacity – 360 litres Working Pressure 250 bar.

Flow setting – 120 l/min (Max. Flow 135 l/min)

HPU

Max Line Pull

3000kg Bare Drum

Winch Drive Motor

Volvo, F12‐030‐MF‐CHC Motor displacement – 30cc/rev

Brake/Gearbox

Brevini CTD3150

Control

Danfoss PVG120 (Optional remote control)

Spooling Adjustment

9.4mm‐25mm Diameter, plc control

Frame

Welded steel Channel skid, Box section top lifting frame – Pad eyes x 4

Dimensions

2000 x 1600 x 1550 mm H

Weight

3000kg Tare, 5000kg Gross

Certification

Full certification package for hose test, MPI, slings, shackles and load test

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

UES Products 2017 / 101

ROV TP03 Trash Pump

MODELS: TP03

GENERAL DESCRIPTION



3” NB suction dredge utilizing the lightweight efficient TP03 Trash Pump as its motive power



Capable of moving large volumes of liquid with concentrations of solids up to 25% running from a typical ROV hydraulic supply



Optional jetting lance can be used in difficult soil conditions to fluidise the material and make it easier to dredge



Can be adapted for diver operation

TECHNICAL SPECIFICATION

Pump Flow

1688 LPM water

Pump Connections

4” Camlok Discharge, 3” Camlok Suction c/w Heliflex Hoses & ROV Suction Head

Hydraulic Connections

8JIC Supply & Return 4JIC Pilot

Inlet Flow

Up to 3” solids

27 l/min

Inlet Pressure

210 bar Max

Dimensions

450 x 450 x 320 mm H

Weight

30kg (in Air)

Tools supplied as standard with 3m Suction and Discharge hoses and 3m whips w/ JIC connections

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL 102 / UES Products 2017 t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

Hydraulic Winches

MODEL: 15Te Zollern Winch

GENERAL DESCRIPTION



Suitable for pulling loads of up to 15Te



Wire capacity of 250m



Powered from an independent Hydrualic Power Unit

TECHNICAL SPECIFICATION

Manufacturer

Zollern

Model

ZHP 4.29

Max Line Pull

15Te on layer 6

Line speed:

0‐14 m/min

Drum Dimensions

672mm Core Dia. 1120mm Flange Dia. 530mm Drum Width

Wire Capacity

250m x 32mm

Hydraulic Supply

150 l/min @ 250 bar Max

Control

Local directional & tension control

Brakes

Dual Failsafe Mult‐disc Brake

Hydraulic Motors

2 off SAI GM1‐250 Radial Piston

Dimensions

1426 x 1230 x 1165mm H

Weight

3500kg Tare, 4500kg Gross

ATR EQUIPMENT SOLUTIONS

+44 (0)1224 222777

equipment@atrgroup.co.uk

ATR LIFTING SOLUTIONS

+44 (0)1224 826662 lifting@atrgroup.co.uk

ATR MARINE SOLUTIONS

+44 (0)1224 826662 marine@atrgroup.co.uk

Underwater Engineering Services, West Pitmillan, Foveran, Ellon, Aberdeenshire AB41 6AL t +44 (0) 1358 789 808 | f +44 (0) 1358 789 575 | e info@uesltd.net | w www.uesltd.net

ATR POWER SOLUTIONS

+44 (0)1224 775050 power@atrgroup.co.uk

UNDERWATER ENGINEERING SERVICES +44 (0)1358 789808 sales@uesltd.net

UES Products 2017 / 103

PRODUCT INDEX Engineered Solutions

Torque Tools

Flex Joint Cleaning Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 //

Electric Smart Torque Tool API 17H Class 1-4 . . . . . . . . . 13 //

ROV Shackle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 //

Hi-Torque Tool API 17H. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 //

Sea Chest Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 //

Smart Torque API 17h Class 1-4 . . . . . . . . . . . . . . . . . . . . . . 14 // Torque Tool API 17H Class V. . . . . . . . . . . . . . . . . . . . . . . . . . 19 //

Standard ROV Tooling 5K Water Blaster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 // 17 H/D Hot Stabs & Receptacles . . . . . . . . . . . . . . . . . . . . . 21 // 30 inch Saw. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 // AX/VX Gasket Removal Tool. . . . . . . . . . . . . . . . . . . . . . . . . . 24 // Brushing Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 // Docking Cone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 // Dual Fluid HPU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 // Dynaset Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 // ECB Units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 // Flying Lead Orientation Tool. . . . . . . . . . . . . . . . . . . . . . . . . . 16 // GL4 Regan Latch Release Tool. . . . . . . . . . . . . . . . . . . . . . . . 34 // Hub Cleaning Tool. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 // Intelligent Valve Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 // Intervention Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 // Linear Valve Override Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 // Mag Drill. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 // Multipurpose Pumps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 // Paddle Valve. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 // PH Probe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 // Subsea Load Cell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 // Subsea Sample Bottle Assembly. . . . . . . . . . . . . . . . . . . . . . 41 // Subsea Torque Verification Unit . . . . . . . . . . . . . . . . . . . . . . 17 // Suction Cup Sticky Foot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 // Suction Pile Interface Stab . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 // Super Grinder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 // Torque Receptacle API 17D. . . . . . . . . . . . . . . . . . . . . . . . . . . 32 // Torque Tool Adapter 17H Class 6/7. . . . . . . . . . . . . . . . . . . 20 // Vortex Dredge Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 //

UES Products 12Te Tensioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 //

Roller Chute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 //

3.5Te Demag Peel Grab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 //

Roller Sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 //

5Te Peel Grab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 //

ROV Chain Caliper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 //

10Te Vantec Grab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 //

ROV Sheave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 //

Accumulator ER System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 //

ROV TP03 Trash Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 //

ATEX Zone 1 Hydraulic Power Pack. . . . . . . . . . . . . . . . . . . 52 //

Softline Cutter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 //

Dirty Work Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 //

Softline Cutter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 //

Diver Torque Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 //

Spitznaz Angle Grinder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 //

Drum Spooler. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 //

Stanley Chipping Hammer. . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 //

Electric Powered Reel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 //

Stanley Hydraulic Drill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 //

HPU & Reel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 //

Subsea Drill Rig. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 //

Husqvarna Cut Off Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 //

Subsea Torque Verificaation Unit. . . . . . . . . . . . . . . . . . . . . 75 //

Hydraulic A-Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 //

Turns Count & Torque Reader. . . . . . . . . . . . . . . . . . . . . . . . . 77 //

Hydraulic Breakers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 //

Twin Disc Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 //

Hydraulic Cut-Off Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 //

Wire Rope Cutter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 //

Hydraulic Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 //

Wire Rope Cutter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 //

Hydraulic Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 //

Wire Rope Cutter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 //

Hydraulic Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 // Hydraulic Grinder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 // Hydraulic Hole Punch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 // Hydraulic Impact Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 // Hydraulic Impact Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 // Hydraulic Peanut Grinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 // Hydraulic Power Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 // Hydraulic Power Pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 // Hydraulic Recip Saw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 // Hydraulic Reel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 // Hydraulic Shear Cutter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 // Hydraulic Shear Cutter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 // Hydraulic Winches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101 // Hydraulic Winches. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103 // Intensifier Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 // Large Hydraulic Reel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94 // Magnum Core Drill . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 // Marine Cleaning Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 // Melcal Marine Crane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 //

www.seanicusa.com

A Centurion Group company

THE CENTURION GROUP PORTFOLIO OF COMPANIES Centurion Group Limited provides equipment rental and specialist services on a global scale. We provide our customers with superior value by virtue of our experienced people and our unique ability to provide one rental solution via our portfolio companies. We combine the scale, breadth and capability of our collective rental solutions to drive efficiencies for our customers globally.

www.conserveplc.com

www.rentairoffshore.com

www.seanicusa.com

www.jackswinches.com

www.tristarwater.com.au

www.miningcamps.com.au

www.atrgroup.co.uk

www.sthyd.com

www.atrgroup.co.uk/services/ underwater-engineeringservices/

SEANIC OCEAN SYSTEMS

Seanic Headquarters

Seanic UES UK Office

Seanic Singapore Office

25310 Clay Road Katy, TX 77493 United States 713-934-3100 info@seanicusa.com

West Pitmillan Business Centre Newburgh, Ellon AB41 6AL United Kingdon +44 1358 788202 info@seanicusa.com

8 Taus View Square Singapore, 637574 +65 6863 4470 info@seanicusa.com

www.seanicusa.com

A Centurion Group company