BIOCARGO TECHNICAL DATA
1ª edition, Sep 2024, v 1.0 - Mod. Standard & XL
English version.
© 2024 Scoobic Group
All products names mentioned in this manual are trademark or registred trademarks of the respective title holder.
Printing in Dos Hermanas, Seville · Spain
Technical data
Main vehicle data
Technical data
Main vehicle data
Technical data
Dimensions
Technical data
Chassis
The chassis is the skeleton of the vehicle, which resists all static forces and inertial forces when running. It is made up of different components made of aluminum and are fixed to the central piece using screws.
Technical data
Cabin chassis
The cab chassis generates the driver's cabin and is responsible for protecting it. It is made of aluminum and fixed to the main chassis using screws.
Technical data
Steering
System responsible for transmitting movement to the front wheels and allowing the vehicle to turn.
Technical data
Front Axle
System that makes direct contact with the asphalt, transmits the turn to the vehicle and absorbs the impacts caused by irregularities in the road surface.
(mm)
Technical data
Rear Axle
System that makes direct contact with the asphalt, transmits propulsion to the vehicle and absorbs the impacts caused by irregularities in the road surface.
absorber (mm)
170-240
Technical data
Brake system
System that is responsible for braking and maintaining the car in a stationary state when parked.
Technical data
Motor
The vehicle uses SEG LEM 2/30 motors, which provides pedal assist to increase speed and facilitate travel. Thanks to this motor, large loads can be transported more comfortably and efficiently.
Technical data
Battery
The battery provides the energy needed to power the motor and allows the vehicle to operate with less force when pedaling.
Motorcontroller
The vehicle uses the EI (Embedded Innovation) controller. The controller regulates and coordinates the power provided by the battery to the electric motor. It controls the speed, torque and other operating characteristics of the Biocargo's electrical system, ensuring optimal performance and a safe and efficient driving experience.
Technical data
VECU
The VECU is a high-performance electronic control unit designed specifically for electric bicycles. It offers a powerful and sufficient solution for smooth and responsive performance.
Communications supported
Input set support
Technical data
Alternator
Provides an optimized pedal feel and driving experience to users. By switching from kinetic energy to regenerative brake energy when the brake pedal is applied, it allows the user to drive for longer.
Technical data
HMI
The HMI displays vehicle information (speed, trip distance, total distance, errors, battery status ). By means of the HMI keypad we will change the driving modes (M1 ~ M5 and R).
Technical data
