Fuchs Renolin Anti stick slip FUCHS RENOLIN ANTI-STICK-SLIP is an Anti-Stick-slip Additive
Description In hydraulic systems and components with low sliding velocities and high pressures, often stick-slip phenomena occur.Therefore hydraulic cylinders cannot be positioned exactly.RENOLIN Anti-Stick Slip provides a stable and adhesive lubricating film even in micro-feed situations, and when pressures are high. This good lubricating film eliminates chattering – instable lubricating films – under mixedfriction conditions, which prevents the cylinder packages,elastomers and sealing materials from being destroyed. FUCHS RENOLIN Anti-Stick-Slip contains a selected additive combination which creates surface- active layers which lead to low friction coefficients and which avoid stick-slip phenomena (e.g.in hydraulic elevators,hydraulic cylinders, valves, etc.). A relatively easy and simple addition of 2% of the concentrate to a conventional hydraulic fluid (based on mineral oil or polyalphaolefin) reduces the danger of chattering, stick-slip. RENOLIN Anti-Stick-Slip is miscible and compatible with conventional hydraulic fluids based on mineral oils,hydro-treated oils or polyalphaolefins. In many hydraulic systems, stick-slip effects (chattering) occur, especially at low sliding speeds and high loads. As a result, hydraulic cylinders can not be accurately positioned and the hydraulics can not work exactly. Stick-slip phenomena mean an outline of the lubricating film. This can cause damage to the cylinder packs, elastomers and seals.FUCHS RENOLIN anti-stick panties prevent these unwanted effects. RENOLIN Anti-Stick-Slip is an additive combination specially developed for hydraulic systems to avoid stick-slip effects (for example in hydraulic lifts, hydraulic cylinders, valves, etc.). Adding approx. 2% of this additive concentrate to the hydraulic oil significantly reduces the risk of stick slip. RENOLIN Anti-Stick-Slip is miscible with all conventional hydraulic oils based on mineral oils, hydrogenated mineral base oils or polyalphaolefins compatible.
The information in this product information is based on the general experience and knowledge of FUCHS SCHMIERSTOFFE GMBH in the development and production of lubricants and corresponds to our present state of knowledge. The mode of action of our products depends on a variety of factors, in particular the concrete application, the application of the products, the operating conditions, the pretreatment of the component, possible contamination from the outside, etc. For this reason, generally valid statements on the function of our products are not possible. Our products may not be used in aircraft / spacecraft or parts thereof.This does not apply if the products are removed before installation of components in an aircraft / spacecraft. The information in this product information is a general, nonbinding guideline. Under no circumstances, however, does it imply any warranty of characteristics or a guarantee of the suitability of the product for the individual case.
Application RENOLIN Anti-Stick-Slip can be added in a concentration of 2% to conventional hydraulic fluids (it is recommended to make a pre-solution of the additive with the oil). RENOLIN Anti-Stick-Slip has been used successfully in hydraulic systems of elevators, forklifts, agricultural machinery, platform lifts, hydraulic vibration dampers, etc.