Supplies for (1) Tent : •(4) 1 x 2 pieces of wood at 42″ long •3/4″ diameter dowel at 48″ long •2.5 total yards of fa bric •1.25 total yards of ribbon •Drill + 3/4″ Drill Bit
1.
Tutorial for the Tent Frame
To start off, drill a 3/4″ hole at each end of the (4) 1 x 2 pieces of wood.
2.
One hole of each piece will be for the peak of the tent, while the other hole will be for the ribbon to tie through.
Feed one end of the 3/4” diameter dowel through two of the 1 x 2’s, then fed the other end of the dowel through the other two 1 x 2’s. (Use the same size dowel and drill bit to create a snug fit for the dowel and the hole at the ends of the 1 x 2)
SaratogaMama.com
Summer 2015 | SaratogaMama | 43