Page 1

Quality Mechanical Face Seals & Duo Cone Seals from SAP Parts Mechanical face seals design come in a wide variety. These designs differ in the way they are driven, the choice of secondary seals, and the location of the springs. Mechanical face seals have all been designed to meet certain criteria in terms of application, cost, fit, ease of installation, and capability to seal. Those seals are fitted in Groove of retaining housing groove, to form the sealing at the adjoining faces. Seal Installation inside the Housing Groove: 1. For installation of Seal, arrange a cleaned and dry Seal, wiped housing.

Put the Seal on the Housing 2. Hold the O– Ring in the Fixture. 3. Hold the Seal and O-Ring Firmly and take care O-Ring is not twisted. Locate that seal & tool on groove opening. 4. Press the fixture with even load on the Guide Plate, and experience the O–Ring insertion jerk, inside housing. Small Rings can be manually fixed, but for big rings apply even and gentle pressure around the rim of guide plate using wooden mallet.

SAP Parts also manufacture and supply the duo cone seal, floating seal, mechanical face seals and Toric seals. The SAP Part’s duo cone seal address difficult sealing applications - where radial-lip type elastomeric seals would fail.


as it was needed a new type of seal to improve lubricant retention on undercarriage components immersed in hostile, abrasive, and corrosive environments where elastomeric shaft seals quickly wore out. Duo cone seal designs created which permanently sealed the undercarriage components.

Seals are developed for protection of equipment working in the most adverse conditions mud, rock, sand, and water desert heat and arctic cold, metal face seals provide lubricant retention and exclude contaminates in the all applications. Sap Parts offers two types of metal face seals - manufactured from forged route and investment casting route both seal designs use elastomeric load rings to provide loading for the metal component.

Contact Us: Address: 85, B.U. Bhandari Indl. Estate, Off John Deere, Nagar Road, Sanaswadi, Tal. Shirur, Dist. Pune - 412 208 Maharashtra, India. Email-Id: sales@sapparts.com Phone No.: 919561562957/ 919225546956 Website: www.sapparts.com

Quality Mechanical Face Seals & Duo Cone Seals from SAP Parts  

SAP Parts also manufacture and supply the duo cone seal, floating seal, mechanical face seals and Toric seals. Sap Parts offers two types of...

Quality Mechanical Face Seals & Duo Cone Seals from SAP Parts  

SAP Parts also manufacture and supply the duo cone seal, floating seal, mechanical face seals and Toric seals. Sap Parts offers two types of...

Advertisement