Q-Jet CT20 Flyer V1.1 EN

Sanosil Q-Jet CT20 Automatic 3D Room Disinfection Device

www.sanosil.com

Q-Jet CT20

Manual disinfection: about 80% coverage

Automatic 3D Room Disinfection Device The Q-Jet CT20 represents the pinnacle of aerosol equipment development over the past 20 years. The heart is the proven compressor/ fine nozzle technology, which provides a fine dry disinfection mist. By adjusting the compressor power, a fog development is still possible even at wall distances of only 2m - an advantage that practically all other units in the same performance range cannot offer.

However, if the CT20 is needed for a larger room, a powerful turbine can be switched on. Its air jet acts like a turbofan and not only provides the disinfectant droplets with a significantly wider trajectory, but also ensures optimum distribution in the room. Thanks to the 5l active ingredient tank, a room of up to 600m3 can be fogged with a dosage of 8ml/m3.

The device is standard equipped with 2 different operating modes. In auto mode, the room is automatically flooded with disinfectant mist up to the saturation limit of the air. When the saturation is reached, the unit stops automatically and continues to operate only when the humidity has decreased again slightly. This prevents condensation and thus uneven distribution of the mist in the room. It also prevents material damage caused by liquid.

Conventional manual spray & wipe disinfection only reach around 80% of potential contaminated surfaces. = Efficacy gap!

3D aerosol disinfection: approx. 100% coverage

In expert mode, the desired amount of disinfectant can be manually distributed over up to 4 cycles of definable length, as well as 3 individual intermediate pauses.

The device is operated via a touch screen and also has a logging function.

This allows each disinfection process to be saved for quality purposes and exported as an Excel file via a USB stick.

Technical Datas Q-Jet CT20 Dimensions

450 x 400 x 850mm

Weight

30kg

Tank volume

5000ml

Power supply

220-240V, 50-60Hz

Mist technology

Compressor / Turbine

Min. – max. mist output

10ml/min - 50ml/min

Noise level min. max.

60 - 80 db

Droplet size

5 – 15 microns

Visible mist spray distance

2/5 m (min-max output)

Suitable for rooms

Up to 600 m3

Additional aerosol disinfection after manual spray and wipe treatment reaches all surfaces in the room and reliably closes the efficacity gap.

With the aerosol disinfection, the best possible 3D hygiene of all surfaces in the room is achieved; at the same time, the air in the room is also disinfected.

SANOSIL AG, CH-8634 Hombrechtikon, Switzerland E-Mail: service@sanosil.com

www.sanosil.com