WWW.SALTERELECTRIC.COM
8 1
ELECTRICAL SAFETY PRECAUTIONS
DON’T TOUCH SOMEONE WHO’S BEEN ELECTROCUTED Find the source of electricity and cut the supply. If there is no way to turn off the power source, then push the person away from the contact using a non-conducting material
2
KNOW YOUR CANADIAN ELECTRICAL CODE (CEC) The Canadian Electrical Code (CEC) as it acts as a bible for all electrical engineers. It helps you understand rules and best practices for all sorts of wiring, maintenance, and installation work.
3
FOLLOW PROPER LOCKOUT/TAGOUT PROCEDURES It is a mandatory step that ensures the equipment is thoroughly de-energized before starting the electrical work. If in doubt, use the tester to find out about the power supply.
4
USE GFCIS IN DAMP OR WET WORK AREAS Ground Fault Circuit Interrupters and should always be used while doing your job. GFCIs main role is to interrupt the circuit before it can pass onto the body and do some serious harm.
5
WEAR THE RIGHT SAFETY GEAR All clothing should be designed in such a way that it keeps you safer and make your job as secure and safe as possible. All of your gear should meet standards and must be approved for on-site use.
6
INSPECT & MAINTAIN YOUR ELECTRICAL TOOLS Look for any exposed or damaged wires in tools and get them repaired as soon as possible. Inspect everything in the toolbox thoroughly, such as the body casings, cords, switches and more.
7
AVOID POWER LINES Only when you have enough experience and are aware of the Know-Hows, you should work on power lines. Till then, work only under proper guidance, support and supervision of experts.
8
CHOOSE THE RIGHT LADDER Wood and fibreglass ladders are the best ladders for electricians because they are the bad conductors of electricity that means you are always protected.