A Brief Guide to Installing Vitrified Tiles

The popularity of vitrified tiles is reaching sky-high not only because of their aesthetic appeal but also due to their durability and easy-to-maintain features. Glazed vitrified tile is an ideal choice for commercial and residential spaces. However, to make the best of its characteristics, it is crucial to install them properly, and that is something this blog features.

Steps to Install Vitrified Tiles

 Prepare the Surface

The primary and essential step in installing vitrified tiles is to analyze and prepare the subfloor. Even if the tiles are resilient and robust, a thin or uneven surface is sure to damage them. Therefore, always ensure the base floor is stable before placing the vitrified tile.

Even though a sturdy wooden base can be used as the foundation, opting for a concrete base is preferable. Once the strength analysis is completed, make sure that the subfloor surface is consistent and clear.

 Determine the Total Tiles Required

Since it is your dream space, you would want the best and flawless outcome, so the next step is to determine the total tiles required and the position they will be fixated in. To have a rough idea, follow the steps mentioned below.

● Calculate and multiply the area’s length and width to get the exact area in square feet.

● Account for an additional 10% to 15% of the wastage concerning breakage, cuts, and more.

● Finalize the tile size.

● Decide the number of tiles by dividing the total area in square feet from the space covered by a single tile. After you have the number, calculate the wastage percentage and add it to define the exact number of tiles that you will need.

 Finalize the Layout

Installing digital vitrified tiles randomly will never deliver the desired outcome. Thus, choosing and preparing a generic plan to install those tiles is wise.

Start with placing the tiles throughout the area. Make sure that the design and space left between them look even. It is advisable not to squeeze any tiles with each other just to create a slimmer grout line. In case of uneven spacing, the grout will bond unevenly, with a high chance of flaking off soon, ultimately damaging the tiles.

Once you finalize the layout, mark the borders to remember the position of the respective tile. This will ultimately help you with cutting as well.

 Apply Mortar on the Floor

Before the application, mix the thin-set with adhesive till it achieves a gravy-like consistency. After waiting for ten to 15 minutes, use a trowel to spread the mixture. To avoid any pockets or irregularities, try to keep up with a 45-degree slant which helps with the even distribution of the mortar.



It’s Time to Install

After laying down the mortal evenly, gently lay vitrified tiles on top of the mixture. Use your fingertips to pressurize the tiles whenever necessary softly. Give your wrist a slow and gentle twist to spread adhesive all over the tile’s surface evenly. Repeat the same process until you complete the installation.

 Use Grout to Complete the Installation

Once the tile and thin-set settle, you can start the grouting process. Continue stirring the mixture until it takes a homogeneous yet consistent form. Start spreading the grout mixture evenly and ensure to make use of a dull object to pressurize it perfectly between the gaps.

Wrapping up

Using the correct techniques and tools can simplify the gvt tile installation. However, completing every step of the process efficiently and carefully is crucial. In case of any doubts, it is best to contact a professional for the best results.

Source:

https://sakarmarbo.weebly.com/blog/a-brief-guide-to-installing-vitrified-tiles