Pre cut Shims

Search Search

Recent Posts Pre-cut Shims Ready cut shim (Motor Shim) What are Aluminium Shims and Their Uses at Construction & Mechanical Sites?

Recent Comments

Pre-cut Shims

No comments to show.

November 29, 2021 by Sachin Shim

Sachin shim is a manufacturer, supplier and exporter of finest quality pre-cut shims Mumbai – India.

Pre-cut shims not only reduce labour costs during installation and repair but also facilitate inventory control and avoid the risk of injury when cutting and inserting sharp-edged shims.

The fully equipped cases are practical to transport and offer safe storage and clear arrangement of all available shims. Accurate machine adjustment is an essential element of any alignment process.

Buy comprehensive variety of pre-cut shims with discounted price, customized size.

Order small or large quantities.

Price and quality of our pre-cut shims can be compare to other player of market.

PRE CUT SHIMS/Tab Type Shim are made of stainless steel 304 full hard material protected against rust and deformation. All shims are marked with thickness and size to facilitate identification and re-use. Shims come in a metal storage carrying case with “Shim Corral” size dividers. Also available in individual packages.

Pre–cut shims/Tab Type Shim are available in eight different dimensions and in ten different thicknesses.

Model

Size

Minimum Quantity

SEP 1

40 X 40 X 12mm

20 Nos.

SEP 2

50 X 50 X 15mm

20 Nos.

SEP 3

75 X 75 X 20mm

20 Nos.

SEP 4

100 X 100 X 27mm

20 Nos.

SEP 5

130 X 130 X 30mm

20Nos.

SEP 6

175 X 150 X 33mm

20 Nos.

SEP 7

250 X 200 X 36 mm

20 Nos.

SEP 8

300 X 250 X 40 mm

20 Nos.

FEATURES OF PRECUT SHIMS 1.

2.

3.

4.

5.

6.

Made Of High Quality Stainless Steel (Grade 304/316/321), Allowing. Re-use.

Easy To Fit And To Remove Close Tolerances For Accurate Alignment Fully De-burred and Perfectly Flat.

Pre Cut Shims Are Supplied In Packs Of 10 And Complete Kits Are Also Available.

Each Shim Is Permanently Marked With The Respective Thickness For Quick And Easy Identification.

7. All The Corners Are To Be Rounded Off To Suitable Radius Without Sharp Edges.

8. Tough And High Hardness Shim Prevent Thickness Deformation.

Blog

WHY USING PRE-CUT SHIMS IS BEST FOR MACHINE ALIGNMENT Who’s guilty of using homemade shims? When realigning machinery, improvising with whatever’s on hand to make a shim can be tempting. It’s quick, it’s easy. But it’s also low quality, potentially dangerous and can throw your machine alignment off costing you time and money and reducing the lifespan of your equipment.

FEATURES OF PRECUT SHIMS 9.

10.

11.

12.

13.

14.

Made Of High Quality Stainless Steel (Grade 304/316/321), Allowing. Re-use.

Easy To Fit And To Remove Close Tolerances For Accurate Alignment Fully De-burred and Perfectly Flat.

Pre Cut Shims Are Supplied In Packs Of 10 And Complete Kits Are Also Available.

Each Shim Is Permanently Marked With The Respective Thickness For Quick And Easy Identification.

15. All The Corners Are To Be Rounded Off To Suitable Radius Without Sharp Edges.

16. Tough And High Hardness Shim Prevent Thickness Deformation.

Using pre-cut professionally made shims, you’re ensuring consistent results and an easy and precise alignment every time.

Having a selection of pre-cut shims on hand means you’ve always got the right shim for the right task. It’s a good idea to make sure you have a range of sizes and thicknesses on hand. Using more than five shims for any job is not recommended, so having a few thick shims on hand reduces the need to bulk up the space with added homemade jobs.

Correctly Sized Bolt Slots Having shims pre-cut with the right sized bolt slots also saves a mountain of time and hassle. Remember that a wider bolt slot is better as it lessens the chance of getting the shim stuck.

Even Shim Surface Using precisely engineered pre-cut shims means you can trust the shim is perfectly even over the entire surface, something that can’t be assured using homemade or improvised shims.

Easy to Use Pre-cut shims also have the benefit of dedicated tabs which makes insertion and removal all the easier.

High Quality Materials Shims made of high quality steel will also resist corrosion from alkali or acid exposure so you can be assured your pre-cut shims will last a lifetime.

Workplace Safety Another advantage of pre-cut shims is that there’s none of the burs or sharp edges and corners that come all too easily with quick homemade jobs, so you’ll also be

improving the safety of your workplace.

Better shims mean better machine alignment which means better machine operation.

So, why waste time and effort on using homemade shims when a pre-cut shim not only does a more precise job, it protects your machinery and makes your realignment job a whole lot easier and safer?

Pre Cut Shims can protect all your equipment from misalignment, downtime and damage. We provide standard pre-cut shims which are free of burrs and hence safe.

We have the highest line of stocked pre-cut shims in the industry. We can provide the pre-cut shims and shim kits in the range of many standard and custom sizes. Our shims are cut exactly to the marked thickness. So no micrometre is required to measure their thickness. Sachin Shim Pvt Ltd. Manufacture and Exports both standard and custom designed All Pre Cut Shims in a wide range of materials, including: Stainless Steel, Aluminium, Inconel, Monel, Brass, Bronze, Copper, Carbon Steel, Materials, Mica, Plastic And Many Other Materials.

Eliminate time consuming hand-cutting Eliminate material waste Safety tab prevents accidents and speeds installation Safe removal with supplied shim extractor

Pre-cut Shims alignment shims, bearing shims, coupling shims, Pre-cut Shims, precut shim, READY CUT SHIM, sealing ring Ready cut shim (Motor Shim)

© 2021 sachinshim • Built with GeneratePress