Lighting system with single or double emission, with high-performance LED light sources combined with lenses which optimize the light emitting efficiency of the beams and determine their spread. Available in two sizes: ø 8 e ø 13 cm. Ceiling and wall installation. Available in two finishes: light grey and painted anthracite grey painted.
Calumet wall
Calumet ceiling
Single or double emission version.
Made up of cylindrical body, lighting cap and ceiling fixing flange.
Made up of lighting body, lighting cap and wall fixing bracket. Cylindrical body in EN AW-6060 aluminium containing the electronic power supply components. Optical lighting body in EN AW-6060 aluminium. Led and collimator lenses which swing by means of an aluminium bracket. Diffuser in toughened glass.
Cylindrical body in EN AW-6060 aluminium containing the electronic power supply components. Optical lighting body in EN AW-6060 aluminium Led and collimator lenses which swing by means of an aluminium bracket. Diffuser in toughened glass Water tight silicone gaskets.
Wall fixing bracket in bent steel.
EN AW-6060 aluminium flange to fix the light fixture to the ceiling.
Water tight silicone gaskets.
Electronic ballast integrated in the body.
Electronic ballast integrated in the body.
PMMA lenses with narrow beam (8° and 32°)
PMMA lenses with narrow beam (8,5° and 19°)
White monochromatic LEDs available in 3 colour temperatures:
White monochromatic LEDs available in 3 colour temperatures: Warm = 3000K Neutral = 4000K Cold = 6500K IP65 electrical connection device suitable for cables with a diameter between 6 and 13 mm and allowing the electrical interfacing with the external mains without need of opening the fixture. All fixing dowels used outside the fixture are in AISI 304 stainless steel. The components in die-cast aluminium and the steel bracket for wall fixing are painted by means of 3-stage outdoor treatment: nanotechnologies, antioxidant primer, polyester paint. Technical features of light fixtures in compliance with EN60598-1. IP Rating IP65.
Warm = 3000K Neutral = 4000K Cold = 6500K IP65 electrical connection device suitable for cables with a diameter between 6 and 13 mm and allowing the electrical interfacing with the external mains without need of opening the fixture. All fixing dowels used outside the fixture are in AISI 304 stainless steel. The components in die-cast aluminium and the steel bracket for wall fixing are painted by means of 3-stage outdoor treatment: nanotechnologies, antioxidant primer, polyester paint. Technical features of light fixtures in compliance with EN60598-1. IP Rating IP65. Insulation class II.
Insulation class II.
177