4
5: The pump is simply wired so that it will come on whenever the nitrous is spraying. We decided to parallel the water solenoids up front off the Nitrous Express Maximizer 4 progressive nitrous controller. The water solenoids will be pulsed the same as the nitrous solenoid to ramp it in during a pass.
4: The water supply line was run under the seat, through the console, under the dash, and through the firewall.
5
6
6: We installed a blue low water warning light in the old HVAC vents along side the existing red low oil pressure warning light.
Chassis Engineering’s Outlaw “TRIPLE” Adjustable Ladder Bars The ultimate ladder bar for heavy, high horsepower race cars. 360 degree housing brackets w/integrated shock mounts. Chromoly construction for strength and lightweight. Includes all rod ends, hardware and brackets.
3606 3606A
about the guy with a small kit in his driver? A little water can give you a little wiggle room on the tune and octane requirements, so yes, even street driven cars can benefit. We decided our Ultra Street bound project 4 Lug Thug could definitely use a water meth kit, so we called up Mike Abney at Nitrous Express. Nitrous Express makes single or dual nozzle kits that mount
the nozzles in a carb spacer plate for simple bolt on installation, and even some nitrous plates can be drilled and tapped for the nozzles. We decided to go with an 8-nozzle direct port kit for better distribution and more tunabilty. The Nitrous Express kit comes complete with everything you would need to start burnin’ water except for mount-
$499.95 (pr) 36” Outlaw Adj. Ladder Bar Weld-up Kit $474.95 pr
The chassis prof30esyesioarnas ls for over
Toll Free Ordering: 800-327-9402 Info & Tech: 561-863-2188
chassisengineering.com
www.rpm-mag.com | march 2015
83