How to Set up a Router without a Modem Connect to my Router without a modem, you will need a router, telephone, and a DSL Microfilter. • The Microfilter helps you connect the router to a telephone jack. • Using an Ethernet cable, you should connect your computer to the LAN port of the router. • Next, associate the router with the wall power supply and turn on the router. • Turn on your computer and launch a web browser. Specify the IP address of the router in the search bar. • Enter the username an password in the next window that appears. • Make use of the options present in the left pane of router support to configure the router settings according to your choice.
How to Configure Router on a Stick Configuring a router on a stick can be slightly complicated, so follow the below-mentioned steps carefully to complete the setup process. • The initial step is to connect all the devices. Do this with the help of Ethernet cable. • Next, you should configure the IP address on the PC and the server using DHCP. • The succeeding step is to configure the VLANs on the switch associated with the network. • The VLANs should be created on layer 2 of the switch. • The Switch interface has to be applied to the VLAN in order to set it to Access mode. • You should confirm routing between VLANs after configuring the Sub-Interfaces on the router. • Once you are done with the above-mentioned guidelines, connect to my router on a stick configuration is complete.