How to Factory Reset D-Link Range Extender

How To Factory Reset D-Link Range Extender There are times when you are facing some issues with the d-link range extender and you have to factory reset the D-link range extender.

Well, do not panic as this is normal and can happen with anyone anytime.

But what you must know are the steps that you have to follow for the factory reset D-Link range extender. If you are facing any kind of issue, it will be settled as you reset the device.

Now, there are some different models of the D-Link range extenders and you could be using any. So, in this blog, we are going to cover the steps for some famous models of the DLink range extender.

DAP-1320: The first step is to plug the DAP-1320 upside down in the power outlet. The LED on the front is going to turn RED and then after a few seconds is going to turn orange or green. It depends on whether it was set up previously or not.

Well, on the bottom of the DAP-1320 is a pinhole. This is called a reset pinhole. You need to take a paperclip and then use it to press and hold the reset button for at least 10 seconds until you see that the front LED turns to RED and then leave it.

Thus you will see that the DAP-1320 will reboot and reset to factory settings.

DAP-1330/DAP-1620: Plug-in the extender and into the power outlet. The LED on the front is going to turn RED and then after some seconds will turn to flash orange and Solid Green depending if it was previously set up or not.

On the bottom of the extender is a reset pinhole. Using a paperclip, press and hold the reset button for 10-12 seconds and then let it go.

The extender will then reboot and be factory default settings.

DAP-1520: The first thing that you need to do is plug the extender. The LED on the front will turn RED and after a few seconds will turn Green or orange depending on whether it was previously set up or not.

On the side of the extender is a reset pinhole. Using a paperclip, press, and hold the reset button for at least 10 seconds or until the LED on the front turns red and then let go.

After that extender will then reboot and then reset the factory default settings.

These are some of the steps that you can follow in order to factory reset d-link range extender. If you are not able to reset it, then get in touch with our experts. They will resolve the issues with the best solutions!

For more Information Visit Our Website routererrorcode.com