www.hyundaisolar.com
Hyundai Solar Module Black | MG-Series | �Multi-crystalline Type HiS-M223MG | HiS-M225MG | HiS-M228MG HiS-M230MG | HiS-M233MG | HiS-M235MG
�Mono-crystalline Type HiS-S238MG | HiS-S240MG | HiS-S243MG
Mechanical Characteristics Dimensions Weight Solar cells Output cables Junction box Bypass diodes Construction Frame
983 mm (38.7″ ) (W) × 1645 mm (64.76″ ) (L) × 35 mm (1.38″ ) (H) Approx. 19.0 kg (41.9 Ibs) 60 cells in series (6×10 matrix) 4 mm2 (12AWG) cables with polarized weatherproof connectors, IEC certified (UL listed), Length 1.0 m (39.4″ ) IP65, weatherproof, IEC certified (UL listed) 3 bypass diodes to prevent power decrease by partial shade Front : High transmission low-iron tempered glass, 3.2 mm (0.126″ ) Encapsulant : EVA Back Sheet : Weatherproof film (Black) Clear anodized aluminum alloy type 6063 (Black)
High Quality
Fast and Inexpensive Mounting
�IEC 61215 (Ed.2) and IEC 61730 by TÜV Rheinland �UL listed (UL 1703), Class C Fire Rating �Output power tolerance +3/-0% �ISO 9001:2000 and ISO 14001:2004 Certified �Advanced Mechanical Test (5,400 Pa) Passed (IEC) /Mechanical Load Test (40 lbs/ft2) Passed (UL) �IEC 61701 (Salt Mist Corrosion Test) Passed
�Delivered ready for connection �Pre-confectioned cables �IEC (UL) certified and weatherproof connectors �Integrated bypass diodes
Limited Warranty �5 years for product defect �10 years for 90% of warranted min. power �25 years for 80% of warranted min. power
�Qualified, IEC 61215 �Safety tested, IEC 61730 �Periodic inspection
※ Important Notice on Warranty The warranties apply only to the PV modules with Hyundai Heavy Industries Co., Ltd.'s logo (shown below) and product serial number on it.
Electrical Characteristics | Multi-crystalline Type | 223
225
HiS-M ��� MG 228 230
233
235
Nominal output (Pmpp)
W
223
225
228
230
233
235
Voltage at Pmax (Vmpp)
V
30.1
30.1
30.2
30.2
30.3
30.4
Current at Pmax (Impp)
A
7.5
7.5
7.6
7.7
7.7
7.8
Open circuit voltage (Voc)
V
36.7
36.8
36.9
37.1
37.2
37.3
Short circuit current (Isc)
A
8.0
8.0
8.1
8.1
8.2
8.2
Output tolerance
%
No. of cells & connections
pcs
60 in series
-
6” Multi-crystalline silicon
Cell type
+3/-0
%
13.8
13.9
14.1
14.2
14.4
14.5
Temperature coefficient of Pmpp
%/K
-0.43
-0.43
-0.43
-0.43
-0.43
-0.43
Temperature coefficient of Voc
%/K
-0.32
-0.32
-0.32
-0.32
-0.32
-0.32
Temperature coefficient of Isc
%/K
0.056
0.056
0.056
0.056
0.056
0.056
Module efficiency
※ All data at STC (Standard Test Conditions). Above data may be changed without prior notice.
| Mono-crystalline Type | 238
HiS-S ��� MG 240
243
Nominal output (Pmpp)
W
238
240
243
Voltage at Pmax (Vmpp)
V
30.8
30.9
31.0
Current at Pmax (Impp)
A
7.8
7.8
7.9
Open circuit voltage (Voc)
V
37.3
37.4
37.5
Short circuit current (Isc)
A
8.3
%
8.3 +3/-0
8.4
Output tolerance No. of cells & connections
pcs
60 in series
-
6” Mono-crystalline silicon
Cell type
%
14.7
14.8
15.0
Temperature coefficient of Pmpp
%/K
-0.44
-0.44
-0.44
Temperature coefficient of Voc
%/K
-0.34
-0.34
-0.34
Temperature coefficient of Isc
%/K
0.052
0.052
0.052
Module efficiency
※ All data at STC (Standard Test Conditions). Above data may be changed without prior notice.
| Module Diagram | 4(0.16″)
(unit : mm, inch)
DANGER
| I-V Curves | Current [A]
4‐Ø7 SLOT THRU
10 9 8
8(0.31″)
7 6
DETAIL A
800(31.49″)
4 X Ø4.2 GROUND HOLE
C B 983(38.70″)
8.5(0.33″) DETAIL B 16.6(0.65″) 11(0.43″)
2 1
Incid. Irrad = 1000 W/m2 Operating Cell Temp = 5 ºC Operating Cell Temp = 25 ºC Operating Cell Temp = 45 ºC Operating Cell Temp = 65 ºC 5
10
15
20
25
30
245.5(9.66″)
10
35
40
Voltage [V] Incid. Irrad = 1100 W/m2 Incid. Irrad = 1000 W/m2 Incid. Irrad = 900 W/m2 Incid. Irrad = 800 W/m2 Incid. Irrad = 700 W/m2
9 8 7 6 5
1.8(0.07″)
4 3 2
30(1.38″) C
3
0
60(2.4″)
939(36.97″)
4
Current [A]
35(1.38″)
GROUND MARK
550.5(21.67″)
5
(+) 1,000mm(39.37″) 4mm2 CABLE & CONNECTOR
362.5(14.27″)
1645(64.76″)
(‐) 1,000mm(39.37″) 4mm2 CABLE & CONNECTOR
19.5(0.77″)
A
SECTION C‐C
1 0
Cell temp. = 25 ºC 5
10
15
20
25
30
35
40
Voltage [V]
| Installation Safety Guide | Only qualified personnel should install or perform maintenance.
Nominal Operating Cell Temperature Operating Temperature
Be aware of dangerous high DC voltage.
Maximum System Voltage
Do not damage or scratch the rear surface of the module. Do not handle or install modules when they are wet.
Sales & Marketing 140-2, Gye-dong, Jongno-gu, Seoul, Korea
Maximum Reverse Current
Tel: 82-2-746-7563, 8405, 8406
46 ˚C ± 2 -40 - 85 ˚C DC 1,000 V (IEC) DC 600 V (UL) 15 A
Fax: 82-2-746-7675 Latest Update: April 2011