How to Fix a Tire Puncture on Your Own? Step-by-Step Guidance

Did you know that you may patch your punctured tire instead of buying a new one? If you're willing to get a bit greasy and do the effort yourself, you'll be able to be back on the road and enjoy the drive-in in no time. Simply have a kit box with you at all times when driving.

5 Step-by-Step Process to Fix a Tire Puncture

1. Detect the Leak

The first step is to identify the leak. The item that has punctured the tyre is not always easily discovered. Anything might be a nail or a sharp item. Examine the tire carefully to determine whether it has any holes or cuts. If a visual check is ineffective, inflate the tyre to the proper pressure level and listen for a hissing sound. If you can't find the puncture, combine some dish soap with water and spritz or brush the mixture on the tire. Bubbles will be visible coming from the leaking spot. Mark the location with tape.

2. Loosen the Lug Nuts and Jack up the Car

The second step is to remove the tyre by losing the lug nuts. You may use an impact wrench or a lug wrench to do it. Do this before jacking up the automobile, otherwise, it will spin dangerously while removing the bolts.

It's time to jack up the automobile and take the wheels off. You may accomplish that by parking your automobile on a solid or flat surface to keep it from rolling! To keep the automobile stable, use jack stands. Position your auto jack to your vehicle's designated jacking points and use it to elevate the side you're working on.

3. Remove the Lug Nuts and Thoroughly Clean the Hole

Remove the lug nuts completely to detach the wheel from the wheelbase. It's now time to clean the leaking region by repeatedly putting the rasp tool into and out of the puncture/hole.

4. Connect the Plug

To push a plug into a hole, it must be threaded into the center of the insertion tool. Lubricate the plug with an adhesive such as glue or rubber cement for a better seal and easier insertion. Now, let the plug alone for at least one minute to allow the glue to cure and dry. Remove the portion of the plug that protrudes from the tire surface.

5. Pump the Tire

The next step is to fill the tire with the recommended air pressure to guarantee that your automobile moves smoothly. Replace the wheel, remove the floor jack, and tighten the lugs to the correct torque.

However, if you are not confident about changing a flat tire, you can visit the nearest mechanic shop Careem Autocare. Here you can all types of tire services in Mississauga.