Rock Perry

Through the air,

I fly upon the air

Toward the sky, far, far, far,

To find the sacred land.

And now the change comes over me.

Goyathlay, “The One Who Yawns,”

Atlanteans allegedly harnessed the energies of the pyramids, using harmonics linked to crystals to that end. As we have the Great Pyramid at the center of the planet linked to the grid matrix that creates our reality, so, too, did the Atlanteans. Their pyramid allegedly sunk to the bottom of the Atlantic Ocean which is a metaphor about returning to the collective unconsciousness or source of creation.

Atlantean crystals received power from a variety of sources, including the Sun, the Earth’s energy field grid system or from each other. Grids point are often marked by pyramids. The Atlanteans used this energy, combined with crystals, to transmit energy from one pyramid to another or, as aliens, to enter and leave the planet.

My name is Myk’Tayt and I have been in contact with Dr. Osmanagich and I seem to have decoded the frequency of the ‘energy beam’ coming from the Bosnian Pyramid of the Sun. Given that the data obtained is true in its absolute verity, there seems to be an ultrasonic frequency transmission within the ‘energy beam’ that has been decoded down to audible, understandable, tones of communication. We are discussing the findings prior to public release or publishing due to the overwhelming scrutiny, to be sure of what we find is indisputable. I will be putting an article together and publishing it on his website for all to read. I can tell you that this is all very real and we are very privileged to be living in the times we currently are. At this moment I can say that there is a transmission in the frequency, there are more than one voice, and that they are speaking a earth-spoken language (transcriptions will be available with the article). I can also honestly say that there is much more to be learned and understood from what exactly is happening with this frequency/transmission/energy than we can currently convey. We do not know all that we should, that I can say with a whole heart and conscious. Let’s hope the “powers that be” let us bring you the truths you deserve to know.

It is my understanding that the pyramids are chambers, as you rightly say. For healing/ rejuvenation.

They are light and sound chambers, using mathematical formulae in their makeup both in structure and materials. The different layers hold different 'notes'/codes of patterning and are keys that are awakened when triggered by aspects of interaction with life forms, and seen and unseen energy patterns, bringing about homeostasis with anything that it is in touch with.

I feel that the pyramids were built using each layer as a 'note' that relates not only to a color frequency and therefore density in terms of layers of 'light' - but also to ‘notes’ as in musical scale - which, if we look at dolphins and whales and their 'calls' sounds exactly like the slowed down version of the sounds emanating from The Sun Pyramid! (I have swum with both and experienced energy transmissions from them, especially after the Tsunami some years ago when the whales appeared to be re-establishing their energy pathways along the sea bed - a type maybe of re-patterning the earth's grid and their migration signposts, with sound! I was out swimming with them some months later and many were singing when

it was not normal for them to do so! Maybe coincidence, maybe not. The energy I felt from them was the same energy I feel when I transmit and receive as an instrument through my own body, for healing others.)

Each step on the pyramid complex relates, I feel, to a particular frequency and vibrational coding that allows it to access and heal a particular aspect of physical mass. So just as the voice and using vowels will relate to a particular aspect of healing within the patterning and system of the body - now well documented with 'sound healing', so does this coding access and focus dynamically on the re balancing of that 'level' with its signature note. Like to like in a way but because the pyramid constantly renews itself it is able to clear negative energy and bring about a positive change to not only restore but realign.

So the layers matter in the pyramids - connected to Mother Earth and the Cosmos. A library that is 'aware'. One large huge complex web of DNA coding held safely by the pyramids to transmit and receive and transmit - as and when and very much structured with mathematical formulae to reflect, and fully optimize the patterning of life - therefore resonate with creation and re-create in a way.

The concrete -may well be made to resonate at a particular frequency to act as both earthling and protection. Deliberately constructed from material in balance and programmed with this, then able to 'ground' and store information brought down from the cosmos and equally 'held' and in tune with, the earth but not as finely tuned as the ceramic plates. Different job.

The ceramic plates I feel are so so specific. I think you said it, they vibrate as a 'bridge' that is able to access the energy of the water and structure of energy that emanates from that which is then picked up and disseminated/amplified(via crystal center) to the matter that comes into contact with it. They also receive from the light that comes down for when the pyramid emits, it also receives. The material used in the make up as a whole, translates the different vibrations and frequencies to enable a 'holding' of information. The ceramic plate's make up is very specific in a recipe designed to again, optimize its 'job' both by the balance of amount of materials in their proportion to each other and by the property of the materials it is actually made up of.

So the 'recipes' used in the make up of any man made materials, were planned and used as and where appropriate to allow the molding of the 'vessel' - ie. the pyramid, that could carry both memory in its make up, and intelligence in the organic matter that could pick up on and exchange with other matter.

Each material structure was used for a different job as an aspect of part of the whole. Because it constantly receives and transmits (breathing in and out) from the cosmos, 'the field' - it takes what we would call 'anti matter' from the etheric blue print of creation, brings it down and into its heart where it re-codes, re-aligns, re-stores and upgrades constantly, transmutes negativity with its positive ions and so on, and manifests it into matter again and stored, until the cycle can be repeated when needed. The cycle being its own rejuvenation and renewable energy force but then allowing it to intelligently link with anything that is out of balance and work in the same way - matter to anti matter - to matter again, using the stored information encapsulated but then released from its material physicality. Placed initially from light and the 'notes' that are the blue print of creation, which it has received. So it is an

exchange chamber in a way - and a time warp. Because it holds the ability to remain pure at heart and resonate with our own (and anything else's) original 'pure' blue print and rejuvenate the cells back to that state of remembering.

I really could feel how the pyramid might work with this. It will be affected by each and every individual 'note' a person carries. It will recognize that blueprint 'note' or vibration of the person that carries a unique code and it will respond accordingly. As a source of continuous 'light' power, or frequencies of positive energy, it will create 'cell chat', remove energy blocks, to allow the physical matter to re adjust itself on all levels using magnetic frequencies. I do wish I were a scientist and could write in a way that is your language. I am so sorry! I hope this makes sense to you and you will understand I am just giving you what I felt from last night - some of which I have experienced personally in my work so I know it to be so. I may have repeated myself. I find it hard to explain - so have just given you as I 'saw' it and tried to explain from a reality I work with each day.

Suckah can be used much like the eyedropper tool in Photoshop to grab the current color value of any screen pixel. This is useful in creating color palates from images, Chroma keying, color tracking, UI design, and more. http://cycling74.com/docs/max6/dynamic/c74_docs.html#suckah

Sound & Color

“UNIQUE LANGUAGE” SOUND - COLOR - NUMBER

This Calculator converts numbers and related transaction in numeric forms, it shows the corresponding value of sounds in Hz., Colors in nm., RGB, CMYK, XYZ, and the device emits the resulting sound.

To pass from one harmonic NOTE to the next of the same harmonic NOTE it is enough double the frequency in Hz.

Based on this principle, the software of this calculator multiplies by 2 the frequency in Hertz of the NOTES that make up the “Musical Chromatic Scale” until you get to values in GHz. of the visible spectrum.

With this Calculator you can transform the sounds of your song to obtain the musical score in a colored sequence, where the colors harmoniously conveys it to how it sounds. You can harmonize your lights, paints, drawings or photos by combining them in sounds and colors.

You can play to discover which color corresponds with your favorite number, or convert your sounds in colors and numbers.

For expert musicians and composers, it is possible to build musical scores using mathematical functions and formulas simply by playing with sound and color bands.

The Calculator can work in four different modes:

Cycle in BASE 7 CALCULATOR Chromatic Numbers in Equal Tempered Scale

Cycle in BASE 10 CALCULATOR Numerical Sequence in Equal Tempered Scale

Color to Sound CONVERTER from Hertz to Nanometers and RGB-Wheels CONVERTER

Sound to Color CONVERTER from Hertz to Nanometers

For more information about the BASE 7 System , the Sound-Color Correspondence Chart, and the Electromagnetic Spectrum, please visit www.baseseven.com

Base Seven and Sound - Color Calculator F# = 0,00000000~ Fa# http://www.colorhexa.com/a82c24 Ruby - Maroon Gemstone G = 0,40404040~ Sol http://www.colorhexa.com/da3531 Red - Diamond G# = 1,11111111~ Sol# http://www.colorhexa.com/dd3431 Indian Red - Agate A = 1,51515151~ La http://www.colorhexa.com/e4662b Salmon - Coral A# = 2,22222222~ La# http://www.colorhexa.com/f8e01e Gold - Imperial Topaz

B = 2,62626262~ Si http://www.colorhexa.com/96c855 Olive - Peridot C = 3,33333333~ Do http://www.colorhexa.com/5bb641 Lime Green - Emerald C# = 4,04040404~ Do# http://www.colorhexa.com/7ec6c3 Turquoise - Tanzanite D = 4,44444444~ Re http://www.colorhexa.com/407dbe Light Blue - Aquamarine D# = 5,15151515~ Re# http://www.colorhexa.com/354990 Blue - Sapphire E = 5,55555555~ Mi http://www.colorhexa.com/49488e Blue Purple - Chalcedony F = 6,26262626~ Fa http://www.colorhexa.com/5c387e Purple - Amethyst F# = 0,00000000~ Fa# http://www.colorhexa.com/ac2b26 Burgundy - Garnet

http://schuckjewelers.com/?page=gemstones

Harmonics F#0 F#1 F#2 F#3 F#4 F#5 F#6 0 42 58 67 78 87 91 Value

G0 G1 G2 G3 G4 G5 G6 0 42 58 67 78 87 91 Value

G#0 G#1 G#2 G#3 G#4 G#5 G#6 0 42 58 67 78 87 91 Value

A0 A1 A2 A3 A4 A5 A6 0 42 58 67 78 87 91 Value

A#0 A#1 A#2 A#3 A#4 A#5 A#6 0 42 58 67 78 87 91 Value

B0 B1 B2 B3 B4 B5 B6 0 42 58 67 78 87 91 Value

C0 C1 C2 C3 C4 C5 C6 0 42 58 67 78 87 91 Value

C#0 C#1 C#2 C#3 C#4 C#5 C#6 0 42 58 67 78 87 91 Value

D0 D1 D2 D3 D4 D5 D6 0 42 58 67 78 87 91 Value

D#0 D#1 D#2 D#3 D#4 D#5 D#6 0 42 58 67 78 87 91 Value

E0 E1 E2 E3 E4 E5 E6 0 42 58 67 78 87 91 Value

F0 F1 F2 F3 F4 F5 F6 0 42 58 67 78 87 91 Value

Hue refers to a gemstone's basic color. The human eye can discern approximately 150 different hues; however, only 31 are widely utilized in gemology and serve for the vast majority of gemstones.? Those gemstones with purer hues are generally considered more valuable; for example, green for tsavorites, blue for sapphires and red for rubies. Sometimes there is a hint of another color. Tsavorites may range from yellowish green to bluish green, sapphires from purplish blue to greenish blue and rubies from orangey red to purplish red.

Hue is defined as the position of the color on the color wheel, or the spectral location of a given sensation of color.

http://www.uppergems.com/img/cms/HueChart_1.JPG

Saturation is a measure of the color’s intensity or purity. It is determined by the degree to which the stone is free from muting gray or brown hues. The most desirable gemstones, with saturation described as "vivid" or "strong," show little gray or brown. Since value increases with saturation, a fully saturated bluish green emerald may very well be more expensive than a muted pure green one.

Generally speaking cool colors are modified in shades of grey and warm colors are modified in shades of brown.

http://www.uppergems.com/img/cms/saturation_1.jpg

Tone represents the depth of color and is a measurement of the color’s lightness or darkness, ranging from colorless to black. Jewelers describe tone as either light, medium-light, medium, medium-dark or dark.??

Tone measures in an 11 step scale. If a gemstone is too light in tone it will not have a rich colour, and likewise, if a gemstone is too dark, it will compromise brilliance and transparency. The best colours have a tonal range of 50% to 70%; however, gemstones also have different optimal tone and saturation values based on the color produced in nature.

http://www.uppergems.com/img/cms/tone_1.jpg

Clarity

Each gemstone is comprised of a unique combination of trace minerals. These create tiny fractures or mineral flaws called “inclusions.” Under magnification or by their careful unaided eye, gemologists take note of inclusions as well as “blemishes” or surface irregularities in gems. Gems Feed Clarity grades range from IF (Internally flawless) to I (Included).

As with diamonds, the type and location of inclusions are more important than the fact that inclusions exist in the gemstone. It is important that any inclusions do not penetrate too deeply into the stone, because this may affect the gem’s durability, causing it to crack or break. Deeper colors can mask imperfections better, so it is more important in lighter colored stones to select those with fewer blemishes or inclusions.

Flawlessness in gemstones is even rarer than in diamonds. Gemstones with few or no inclusions are available, but they are usually much more expensive. Even most high-end gemstones are at least slightly included. Being more common, sapphires in jewelry tend to have higher clarity levels than rubies.

Internally flawless sapphires are very rare, but internally flawless rubies are extremely rare. When considering a colored gemstone's clarity, you should measure your expectations against the standard for that variety of gemstone. Some varieties of colored gemstones, such as aquamarine, blue topaz, and citrine, have naturally fewer inclusions while other gemstones, such as emerald and ruby, tend to have a higher rate of acceptable inclusions.

http://www.celticnz.co.nz/Clandonwebsitefiles/Clandon4a.htm FURTHER THROUGH THE EYES OF THE WISE OLD OWL. We'll now deal with the coded values that flow downward through the innermost diamond. As always the circle radii values listed and drawn are determined precisely in AutoCAD, according to British Standard inches. Here are the apparent codes: .2304 (Great Pyramid face area value, navigation), .2551.5 (7.2 lunar years...calendar), .2835 (Khafre Pyramid, lunar).

.384 (navigation, lunar), .41472 (true equatorial circumference), .4608 (11.52 series, lunar, navigation, etc). .55 ("11" series navigation), .576 (Great Pyramid, navigation), .61111 ("11" series navigation). .72 ("6" series, navigation), .756 (Great Pyramid, multi-use value), .792 ("11" series equatorial circumference). .891 (Menkaure Pyramid, "Y" Holes, navigation), .93333 ( Sabbatical calendar), .972 (navigation, lunar nutation).

1.08 (Precession, multi-use), 1.1 ("11" series navigation), 1.134 (Stonehenge station stones, lunar nutation cycle).

1.236068 (formula for correct volume vessels, PHI), 1.265625 (lunar), 1.296 (Precession of the Equinoxes, navigation).

1.542857143 (7th expression breakdowns of 360-degrees), 1.5625 ("11" series navigation).

1.575 ("6&7" series measurements, lunar, PI @ 1.5708), 1.62 (rounded PHI, true PHI @ 1.6180339).

Some of these positions are dual coded and the user of the memory device would automatically associate 1.575 with 1.5708 simultaneously. The 1.575 progression was integral to the Greek measurement system (as a rounded form of PI), but is also found on the inner rim of the Sarsen Circle at Stonehenge. The Sarsen Circle inner circumference can be dual read as 315 feet (1/2 stadia) or 314.16 feet (a PI reading based upon 100 feet diameter). Similarly, the 1.62 value, found within many ancient structures from Egypt to Britain (as elsewhere), is simply a rounded form of PHI and can be dual read (literally or symbolically) as 1.62 or 1.6180339. The Clandon Barrow or Bush Barrow lozenge devices acted as memory triggers for the recall of numerous codes, the precise values of which had been (at some epoch) calculated on an abacus and then committed to memory. A raft of very essential (traditional) mathematical progressions was available for every astronomical, navigational and calendar calculation requirement, based upon unchanging constants within celestial cycles or the dimensions of the Earth.

We will now consider the bottom quadrant of the innermost diamond and the coded values inscribed into stations expanding upward across the diamond. The circles displayed comply to the exact British Standard inch radii values listed below: .252 (Great Pyramid), .28 (calendar), .3168 ("11" series navigation). .4166666 ("10" series), .45 (compass), .4752 ("11" series navigation). .576 (Great Pyramid, navigation, etc.), .611111 ("11" series navigation), .65625 (lunar, navigation).

.756 (Great Pyramid, multi-use value), .792 ("11" series equatorial circumference), .825 ("11" series navigation). .9375 (compass, lunar, "11" series navigation), .972 (lunar, navigation), 1 (inch reference).

1.1 ("11" series navigation), 1.134 (Stonehenge station stones, lunar), 1.265625 (lunar).

1.296 (Precession of the Equinoxes, navigation), 1.32 (Stonehenge "Z" Holes, "11 series navigation).

1.54285714 (breaking 360-degrees into 700th values), 1.575 (Stonehenge, lunar & PI dual code).

1.6 (8ths divisions in 360-degrees), 1.6335 ("11" series navigation).

The result of combining the inward running circle geometry, top and bottom, showing the lozenge turned 90-degrees anticlockwise.

The "all in" circle geometry related to the codes set out only within the center diamond of the Clandon Barrow Lozenge (as listed). This is indicative of the amount of encoding that exists within the lozenge and the large amount yet to be identified within more extended station positions.

THE UNION JACK FLAG AND THE BRITISH BULLS-EYE INSIGNIA. In consideration of the way circle geometry was traditionally used for profound scientific coding in ancient Britain, is it any wonder that the insignia adopted by the Royal Air Force during W.W.II was a "bulls-eye", made up of diminishing circles? The Folkton Drums artefacts also display the "Union Jack" flag, which became the flag of Southern England. The Union Jack, made up of the "Grand Cross", with the thinner "Cross of Set" and the "PHI vectors" (which became known as the "Saint Andrew's Cross") was incorporated into the flags of many countries. These included the flags of New Zealand, Australia and Canada (which later swapped over to a "Maple Leaf" insignia). The Union Jack design is a part of "out of Egypt" geometry and is an abbreviated representation of more complex star and cross pattern overlays. The overlay system, incorporating an "8" pointed star, "6" pointed star, "12" pointed star, Grand cross, thin cross, overlaying rectangles and PHI vectors, constituted an important part of the mnemonic coding system for astronomy. It was incorporated, either wholly or partially, into many ancient standing stone circles, ground geometry systems (such as at Rennes Le Chateau in Southern France) or ancient coded community buildings (such as The Crosshouse of Miringa Te Kakara in New Zealand). Let's briefly touch upon one aspect of this "out of Egypt" geometry, which became the St. Andrew's Cross, depicted in the central diamond of the Clandon Barrow Lozenge.... and, equally, upon the Folkton Drums.

The intended, coded diameter of the circle shown was 1.701 inches. This is a lunar code and there are 4 X 1701 days in the lunar nutation cycle, anciently calibrated to endure for 6804 days (major standstill of the moon to major standstill of the moon). The true period is 6798.36 days (18.613 years), but this value will not break down within a mathematical progression, so 6804 days was used by ancient astronomers to describe the cycle mathematically. This numerical description is clearly encoded into the dimensions of the Khafre Pyramid of the Giza Plateau.

The lozenge end points (through its overall length) were set to 270 degrees and 90 degrees, respectively, in AutoCAD. This was for the purpose of ascertaining if there were significant degree angle readings in the central diamond, or along the outer edges of the lozenge. The vectors shown in the central, diagonally lying cross are at: 51.84 to 131.04 and 231.84 to 311.04 degrees, respectively. One set of vectors is an expressions of the degree angle 51.84-degrees (the slope angle of the Great Pyramid). The other vector is an expression of 311.04-degrees and codes the true size of the Earth (31104-miles = 45-degrees of equatorial arc for the true size of the Earth, anciently fixed at 24883.2miles or 12 X 12 X 12 X 12 X 1.2-miles. These two diagonally lying vectors form a St. Andrew's Cross in the centre of the lozenge. The 51.84-degree & 311.04-degree angle lines, which were introduced very precisely within the exacting confines of AutoCAD, perfectly cover the lines inscribed by the ancient artisan.

The 51.84 number was used copiously in ancient navigation. When one travels an ancient English league of 16500 feet the circumference generated from that diameter is 51840 feet (using the navigational rendition of PI @ 3.141818182). The square footage of the 4 sides of the Great Pyramid (no capstone) plus the base it occupies is 51.845 Egyptian Pyramid acres of 28800 square feet each (identified from statements made by Herodotus). The area the Great Pyramid occupies at its base is 5184 square reeds (of 10.5 feet square each). The azimuth angle from the altar at the Octagon of Newark, Ohio, earth embankment complex, through the Avenue and out the extremity gate, is 51.84 degrees. One five hundredth part of the duration period for the Precession of the Equinoxes (25920 years) is 51.84 years, etc.

In the picture above the red line is, as stated, set at an angle of 51.84 degrees around from north (top).

The blue line runs up to 311.04-degrees around from north. 311.04-degrees minus 51.84-degrees = 259.2-degrees. The Heel stone outer face at Stonehenge sits 259.2 feet from site centre at an angle of 51.84-degrees to its south facing side. The sum of 311.04-degrees is 360-degrees minus 48.96-degrees.

If the value of 48.96-degrees is added to 51.84-degrees, then the total is 100.8-degrees. The value of 100.8 feet was 1 second of Earth equatorial arc under the Great Pyramid "6&7" geodetic assignment, which sized the Earth to 3024 X 43200 feet (or 130636800 feet...24741.81818-miles). At Stonehenge's

Sarsen Circle inner rim one of the cross measurements between lintels was 100.8 feet, coding 1-second of arc.

MOONLIGHTING.

All of the circles shown provide specialised ratios, such that the astronomer using the lozenge memory device could calculate periods of time within the 6804 day lunar nutation cycle or the Sabbatical Calendar. The defining circle for this process is the magenta one, which sweeps to the top and bottom of the diamond. It's diameter is 1.701 inches, in homage to 1701 days, or a quarter of the the moon's cycle.

Here are the diameters of the other circles, each of which sweep to touch a pattern line in one quadrant or another around the diamond:

.72 inches radius (1.44 inches diameter). The sum of 1.701 รท 1.44 = 1.18125. The sum of 118.125-days would be 4 lunar months of 29.53125 days each (which is the exact duration of a lunar synodic month to a tolerance of about 57 seconds).

.6880689 inches radius (1.376137832 inches diameter). This is simply a half PHI (.80901695) reduction on the 1.701 inch diameter circle. Sizing circles and squares in PHI or half PHI reductions to each other was very common practice on astronomical sites such as Stonehenge. The station keeps the PHI reduction or expansion of values in memory and is dual coded to also include "rounded PHI" (1.62). The sum of 1.701 รท .81 = 2.1.

.666666 inches radius (1.333333 inches diameter). The sum of 1.701 รท 1.333333 = 1.27575. The period of 1275.75 days is 3.6 lunar years. The very important period that the astronomer had to remember was 2551.5-days, or 7.2 lunar years. The ancient Sabbatical Calendar system, which was lunisolar, ran for 7 solar years (2556.75 days) concurrently with 7.2 lunar years (2551.5 days). The 5.25 days difference in the periods is the reason the ancient Druidic priests and their forebears had a mistletoe culling ceremony on the 6th day after the Winter solstice. It was to provide the offset of 5.25 days, such that 7 solar years and 7.2 lunar years would terminate on the same day at the end of the first in a series of 7 Sabbatical cycles. This equates to 49 solar years or 7 X 7 (solar years)...concurrent with 50.4 lunar years within the same count + allotments of 5.25 extra days per solar year (X 49) to synchronize the count.

.63 inches radius(1.26 inches diameter). It was convenient to measure periods within the lunar nutation cycle (6804 days), the lunar component within the Sabbatical Calendar (2551.5 days) or the solar component within the Sabbatical Calendar (2556.75 days) in increments of 5.25 days. It is for this reason

that the "reed" measurement (126 inches) was conceived. It's highly probable that the staffs carried by early astronomer/ priests were in 1/2 reed lengths and calibrated in 7th increments. They could then be used to calculate significant lunar or solar periods within the Sabbatical Calendar or milestones arrived at within the lunar nutation cycle. The sum of 1.701 รท 1.26 = 1.35. There are 135 periods of 5.25 days in 1701 days. There are 540 periods of 5.25 days in 6804 days. There are 486 periods of 5.25 days in 2551.5 days. There are 487 periods of 5.25 days in 2556.75 days. The ancient Calendar of Coligny bronze plaque artefact, located in Ain, France in November 1897 AD, is 4.86 feet long (58.32 inches), with a width of 2.953125 feet (35.4375 inches). There are 29.53125 days in a lunar month and 354.375 days in a lunar year.

.6 inches radius (1.2 inches diameter). This is simply a way of dividing the 1701 day period into 12 divisions of 141.75 days. This value provides a mathematical progression that is found upon the Khafre Pyramid of the Giza Plateau (Egypt's pyramid of the Moon). Khafre Pyramid has a design base length of 708.75 feet (141.74 X 5).

.567 inches radius (1.134 inches diameter). There are 15 periods of 113.4 days in 1701 days. The Station Stones rectangle at Stonehenge is 113.4 feet wide and its width defines the outer diameter of the Sarsen Circle from 225-degrees azimuth to 45-degrees azimuth.

The Khafre Pyramid (pyramid of the Moon) was built to a 3,4,5 triangle formula, wherein its dimensions were fluidly divisible by 7 and its side angle was 53.13010235-degrees (opposing angle 36.86989765degrees). The lower right external diagonal line of the inner diamond lies on an angle of 53.13010235 (red line). The line is 1.4 inches long.

MORE LUNAR CODES.

The width of the central diamond is 1.701 inches and that is a dynamic lunar code associated with the lunar nutation cycle. A series of diminishing circles within the lozenge then provide ratios for dividing up the cycle into convenient lesser values.

The length of the inner diamond is dual coded to be 2.3328 inches and 2.333333 inches simultaneously.

When read as 2.3328 inches the value is a lunar code and can be, similarly, subjected to ratio reductions, like the width of 1.701, to produce very useful lunar values. Also, the lunar nutation cycle of 6804 days or the 2551.5 day period of the moon (7.2 lunar years), used for calibration within the Sabbatical Calendar system, can be further rendered in useful values by subjecting them to 1.166666 reductions or increases (2.33333 รท 2 = 1.166666).

Because of the versatility of the 1.1664 or 1.166666 numbers, they were very widely used in antiquity as conversion ratios. The Roman foot was 11.664 inches and 11.66666 inches simultaneously. The Roman Pace was 58.32 inches and 58.333333 inches simultaneously. It's worthy to note that the Calendar of Coligny, mentioned above, was fabricated to be 58.32 inches long, carrying the 58.33333 inch code simultaneously. The Royal Cubits of antiquity had "common" counterparts that were 1.166666 in ratio less. The Romans, with their foot of 11.66666 inches were, quite obviously, using a measurement of 10 inches (1.166666 less) for overland distance calibration.

Researchers are encouraged to subject the length aspect (2.3328 or 2.33333 inches) of the inner diamond to the same scrutiny as the width aspect (1.701 inches) and extract, then experiment with, the values derived. It will be seen that very useful mathematical progressions are created that relate to lunar work or more general overland distance calculations.

AREA CODES.

The width of 1.701 inches X 2.3328 inches = 3.9680928 square inches for the area of the innermost diamond. Alternatively, 1.701 inches X 2.3333333 inches = 3.969 square inches. If these values (in expanded form for convenience) are subjected to division by significant lunar numbers, then here are the results:

39690 รท 6804 = 5.8333333....alternatively, 5.832 39690 รท 2551.5 = 1.555555....alternatively 1.5552 (progression related to the true equatorial circumference of the Earth @ 24883.2-miles. This measurement (as 1555.2 feet) is found coded into the the Octagon of Newark, Ohio, where it is the distance, centre to centre, between the circle embankment and the octagonal embankments). Numerical values derived from this progression featured prominently in many "volumes" or "weights" standards of the ancient Mediterranean.

Similarly, the width or length aspects could be multiplied by the diameters of the inner circles (including PHI or rounded PHI values) to achieve very useful numbers and ratios. With regards to the inner circle diameters, the main preoccupation of the lozenge's user would be to subject numbers like 144, 126, etc., to 1.1666666 increases or decreases, in line with what was happening between "Royal" and "common" cubit measurements of antiquity.

Each of the diamond compartments within the greater lozenges (Clandon or Bush Barrow) can be similarly assessed, in the same vein, as that done above. It will be found that both lozenges have many layers of coding and are very sophisticated, versatile, scientific mnemonic devices.

The central diamond section of the Clandon Barrow Lozenge has multiples of (slightly expanded) scale codes related to the Great Pyramid's dimensions or the equatorial size of the Earth. We'll discuss these as we proceed and find out what the extractable numbers mean within the ancient astronomical/ navigational coding system.

PROBING THE MIND OF THE WISE OLD OWL

If the four inner corner positions of the Clandon Barrow Lozenge's central diamond represent stations for the eye of the wise old owl, then the centre of the diamond represents the owl's mind or "mind's eye". So, the question might well be asked, what is the old sage contemplating within its mind's eye?

It would seem that the old owl is concentrating on the Great Pyramid ratio proportions and how they relate to navigation, as the centre of the lozenge accentuates coding associated with these items. We have already touched upon one aspect of this, but will now expand the circle and extend the St. Andrew's Cross coding to extract further useful numbers.

This picture gives some indication of how involved the Great Pyramid and navigational coding, expanding from the centre of the lozenge, will become in the final analysis. A sampling of circles is shown that relate to top and right hand stations, marked by the points of the innermost lozenge diamond (widthwise & lengthwise). No attempt will be made to enumerate all the variations in the scale codes extracted, but suffice it to say that the numbers generated were a part of the fuller navigational and cyclic knowledge. The Great Pyramid edifice was conceived as a"World Standards" coded structure for ongoing reference by many cousin civilisations of remote antiquity. This was the era when the forebears to the European peoples occupied lands in the Middle East and Near East, before abandoning them to the encroaching desert and moving to the new verdant territories of Europe (about 5000 BC).

The fullness of the "out of Egypt" codes residing within the Clandon and Bush Barrow lozenge devices needs to be extracted by university research teams, using state of the art equipment and high resolution, perfectly scaled photos of the original artefacts. Pending that future event, here's an introductory explanation of what we're looking at in the central "mind of the owl":

The central diamond is 1.701 inches high (lunar code) and 2.3328 inches long (alternative reading 2.333333 inches...dual read in guises of lunar or overland distances). A diagonal cross (St Andrew's Cross) lies within the central diamond and the cross arms are angled to comply with the 51.84-degree face angle of the Great Pyramid, as well as the 311.04-degree code for remembering the "true"

equatorial circumference of the Earth (31104-miles X 4). Variable circle radii are indicated by station points in the 4-quarters of the lozenge (top, bottom, left & right). As each circle crosses the St. Andrew's Cross arms, a value is derived at the intersection points and each value relates to the scaled dimensions of the Great Pyramid or the equatorial size of the Earth.

Not wishing to complicate matters further, it must be pointed out that the 311.04-degree angle would also (symbolically) have meant, 309.2727-degrees and 309.375-degrees, respectively to the ancient user of the lozenge memory device. These alternative readings (3092.727-miles and 3093.75-miles) represented 45-degrees of equatorial arc under other geodetic systems. There were at least 6 such navigational systems in different number families.

THE SCALED DOWN GREAT PYRAMID CODES.

Where circles cross the 51.84-degree lying vector, which relates to the diagonal face of the Great Pyramid, they indicate increased scale pyramids. By knowing the ratio proportion values of the Great Pyramid, between base length, height, face length and angles, the lozenge owner could make a series of very useful, scaled down ratio calculations. These were done within a framework of varying formulas, which viewed the Great Pyramid proportions in marginally different ways, according to several number families. Here are the more important examples of "ways to read" the pyramid's face diagonal length:

The Great Pyramid face diagonal length could be read by ordinary trigonometry. Therefore: 756 feet ÷ 2 = 378 feet ÷ 51.84 COS = 611.7894615 feet (to an apex position where all lines coming up the faces intersect).

The Great Pyramid face diagonal length could be read by PHI (1.6180339 to 1). Therefore: 756 feet ÷ 2 = 378 feet X 1.6180339 = 611.6168142 feet.

The Great Pyramid face diagonal length could be read by "rounded PHI" (1.62 to 1). Therefore: 756 ÷ 2 = 378 feet X 1.62 = 612.36 feet.

The Great Pyramid face diagonal length could be read as an expression of 360-degrees ÷ 58.333333 = 6.171428572 (X 100) = 617.1428572 feet. The base perimeter of the Great Pyramid @ 3024 feet ÷ 51.84degrees = 58.333333. This was a "7" series way of reading the pyramid, which symbolically viewed its face angle as 51.42857143-degrees (360 ÷ 7).

Essentially, the Great Pyramid represented a large static model and assumed several slightly varied mathematical assignments, depending upon what type of calculation (and in what number family) the scientist/ mathematican wanted resolution of a mathematical problem...lunar, solar, navigational, etc..

THE MAIN READING METHOD FOR THE GREAT PYRAMID.

Under the most basic calculation model, the Great Pyramid was seen to have a base length of 756 feet, a face diagonal length to a symbolic apex of 612.36 feet and an overall vertical height to a symbolic apex at 480 feet. In this calculation scenario it's face degree angle was considered to be 51.84-degrees (literal). The Great Pyramid never had a capstone on top, but was built with a flat floor altar at 453.6 feet of vertical height. The importance of this most standard mathematical model related to the exact numbers and ratios it generated.

To find the length of the face (612.36 feet) divide the base length (756 feet) by 1.23456789. Therefore: 756 รท 1.23456789 = 612.36 feet.

Another way of finding the side face length was to multiply half the base length by 1.62. Therefore: 378 X 1.62 = 612.36 feet.

To find the (symbolic) vertical height (480 feet) divide the base length (756 feet) by 1.575. Therefore: 756 รท 1.575 = 480 feet.

To find the height of the altar floor divide the base length by 1.66666666. Therefore: 756 รท 1.6666666 = 453.6 feet.

For those who wish to experiment mathematically with the above "sample" circle codes shown in the central diamond of the lozenge, their inch radii are: .756, .792, .81, .8505, .864, 1.05, 1.08, 1.125 and 1.1664.

THE CENTRE DIAMOND REGION OF THE BUSH BARROW LOZENGE.

As stated, archaeologist's John Coles and Joan Taylor suggested that the Bush Barrow and the Clandon Barrow lozenges were probably fabricated by the same artisan (See The Wessex culture: a minimal view, Antiquity, XLV, 1971, pages 6-13). This contention might well be supported by geometric coding similarities found in the central sections of both lozenges, each showing a St. Andrew's Cross, with arms

lying at 51.84 and 311.04-degrees, respectively. Let's enumerate the "in common" design features of the two gold lozenges.

The Bush Barrow Lozenge centre section, based upon an accurately scaled drawing of the lozenge done within the exacting confines of AutoCAD. Scaling was completed by reference to dimensions supplied by Mr. Paul Robinson, Curator of the Devizes Museum, Wiltshire, England.

The magenta circle has a diameter of 1.701 inches. It touches the end points of the centre diamond to the left and right. This is exactly the same size as the circle that touches the end points of the Clandon Lozenge's central diamond, top and bottom. Both lozenges are accentuating the same lunar code...1701days, which is 1/4th of the lunar nutation cycle of 6804 days.

The red circle is 1.466666 inches in diameter, which has no affiliation to the lengthwise code of the Clandon lozenge's centre diamond (2.3328 inches). The 1.466666 inch diameter is 1/3rd of 4.4 inches and a part of the "11" series navigational system.

The red line running diagonally up to the right is on an angle of 51.84-degrees...the same as the inscribed line on the Clandon Lozenge's centre arm of the St. Andrew's Cross.

The magenta line running diagonally up to the left is on an angle of 311.04-degrees...the same as the inscribed line on the Clandon lozenge's centre arm of the St. Andrew's Cross.

The same codes apply...311.04-degrees minus 51.84-degrees = 259.2-degrees. The Heel stone outer face at Stonehenge sits 259.2 feet from site centre at an angle of 51.84-degrees to its south facing side. The sum of 311.04-degrees is 360-degrees minus 48.96-degrees. If the value of 48.96-degrees is added to 51.84-degrees, then the total is 100.8-degrees. The value of 100.8 feet was 1 second of Earth equatorial arc under the Great Pyramid "6&7" geodetic assignment, which sized the Earth to 3024 X 43200 feet (or 130636800 feet...24741.81818-miles). At Stonehenge's Sarsen Circle inner rim one of the cross measurements between lintels was 100.8 feet, coding 1-second of arc.

THE WISE OLD OWL OF BUSH BARROW.

The Bush Barrow Lozenge, although larger than the Clandon Barrow Lozenge is of a simpler design, with a lesser number of inner compartments. Let's apply the "owl eyes" circle geometry, as found upon the

Folkton Drums artefacts, to the Bush Barrow Lozenge...as,"out of the mouths of two or three witnesses shall every word be established".

Restoring the vision of the old owl of Bush Barrow. Here are the circle codes expanding out from the inner point, upper section, of the central diamond. All radii listed are in British Standard inches:

2.4 ("6" series, navigation, Great Pyramid), 2.3625 (lunar), 2.304 (lunar, navigation), 2.268 (lunar, Great Pyramid).

1.666666 (3,4,5 triangulation), 1.6180339 (PHI), 1.575 (reed, stadia, Great Pyramid), 1.536 (navigation, lunar). .913125 (solar year), .864 (navigation, Great Pyramid, diameter of Sun), .825 "11" series navigation), .7854 (PI).

Here are the circle codes expanding out from the inner point, lower section, of the central diamond. All radii listed are in British Standard inches:

2.43 (lunar), 2.4 ("6" series navigation, Great Pyramid), 2.3625 (lunar), 2.304 (navigation, lunar, Great Pyramid).

1.6875 (lunar), 1.65 ("11" series navigation), 1.6 ("8" series, compass),1.5625 ("5" series, compass, navigation). .93312 (navigation, Babylonian Talent), .88 ("11" series navigation), .833333 (3.4.5 triangulation), .7857 (PI).

The Bush Barrow Lozenge picture turned 90-degrees anti-clockwise. This is the result of restoring the "owl eyes" circle geometry as it relates to the top and bottom sections of the lozenge.

Here are the coded circles expanding out from the inner point, left section, of the central diamond. All radii listed are in British Standard inches:

2.916 or 2.9166666 (lunar, navigation), 2.835 (lunar, Khafre Pyramid), 2.8 (calendar), 2.75 ("11" series navigation).

1.98 ("11" series navigation), 1.944 (lunar), 1.89 (Great Pyramid, navigation, calendar), 1.833333 ("11" series).

1.08 (lunar, precession, navigation), 1.0909090 ( "6&7" Egyptian Royal Cubit, Great Pyramid, navigation). .972 or .97222222 (lunar, navigation), .93312 (lunar, navigation, Babylonian Talent @ 933120 grains).

Here are the coded circles expanding out from the inner point, right section, of the central diamond. In the outer set of pattern line points the the artisan who made the lozenge appears to have added extra codes by extending some lines and letting others fall short during incising. As a consequence, 6 codes will appear in the list for this region instead of 4. All radii listed are in British Standard inches:

2.88 (Great Pyramid, Menkaure Pyramid, Stonehenge, navigation), 2.857142857 ("7" expression within 360-degrees).

2.835 (Khafre Pyramid perimeter, Octagon of Newark, lunar), 2.8 (calendar, 28 lunar mansions).

2.7216 ("6&7" series navigation), 2.66666 (compass) 1.96875 (lunar, Beqa grain weight standard), 1.92 ("6" series navigation), 1.875 ("11" series navigation, lunar, compass), 1.82625 (solar year, day count between equinoxes).

1.0666666 (conversion ratio 15/16ths), 1 (inch reference), .96 ("6" series navigation), .913125 (solar year).

The old owl of Stonehenge slept at Bush Barrow for several millennia's, but is now awakened anew...Like the wise owl of Clandon Barrow, its reputation, too, was much maligned and its profound wisdom brought into question by its enemies. The old sage is restored to its perch, with its eyes firmly fixed on the overabundant rodent population.

The totality of codes expanding outward into the four quadrants of the Bush Barrow Lozenge. Each dimension listed was once absolutely essential for the optimisation of society and the maintenance of the concept of civilisation. Every circle radius or diameter built into the Bush Barrow Lozenge has a pedigree back to the length, angle and area codes found upon the "World Bureau of Standards" structures of the Giza Plateau.

These numerical values were used for tracking the cycles of the sun, moon or planets and maintaining the very accurate Sabbatical Calendar. The values were used in remote antiquity for safe traversal of large oceans or the circumnavigation of the world to set up mining colonies on all continents. Ancient navigation was so advanced that it could be undertaken according to 5 major numerical systems, with a 6th system, based upon PHI, available for specialised scientific calculations.

The lunar, solar and navigational values were used within the weights, measures and volume standards of all the "cousin"great civilisations, extending from Sumeria and Babylon to Britain. The selfsame numerical values are found encoded, by measurement and angles, between cairn markers within the long valleys or over the high hills of the most distant lands and far Isles of the world. This was done, religiously, in every clime at great effort ... lest strangers in new found homelands forget the foundation principles of civilisation or lose the ability to retrace their steps back to the old countries of their forebears.

Sadly, all of this was wrestled, violently, from our grasp many centuries ago and supplanted by something of about the same intellectual composition as pig manure.

There remain many codes yet to extract from both lozenges and the foregoing series of articles is by no means definitive. This body of information should be sufficient to get researchers started in the process of decoding other patterned goldwork of ancient Britain. The key to it all lies in an understanding that the British Standard inch is well over 8000 years old...after that it's simply a matter of making precise measurements to extract the encrypted numerical values within these artefacts.

THE CENTRE CODES OF THE BUSH BARROW LOZENGE.

We have touched briefly upon codes occurring from the centre fulcrum position of the Clandon Barrow Lozenge and will now probe the Bush Barrow Lozenge to see if the same modus operandi was employed in its coding. It will be remembered that the width of the Clandon Barrow inner diamond was 1.701 inches (lunar code), with a length of 2.3328 inches (dual coded as 2.33333 inches). The centre diamond of the Bush Barrow lozenge carries the exact same width code (1.701 inches), but its length is reduced by 1.6 and achieves 1.458 inches (lunar code). This can also be interpreted as 1.45833333 inches for

overland distance use and both numbers are mnemonically representative of the length of the ancient Greek Pygon measurement (14.58 inches), in either lunar or overland distance guises.

The circles expanding out from the centre of the Bush Barrow Lozenge were set to very meaningful radius or diameter values, which are found encoded into ancient structures from Egypt to New Zealand.

Again, all circles shown were precisely measured within AutoCAD, over a correctly scaled drawing of the Bush Barrow Lozenge artefact. Here are the codes that the original artisan placed into the centre section of the lozenge memory device:

The width (top to bottom) of the diamond is 1.701 inches (red circle). There are 1701 X 4 days in the 6804 day lunar nutation cycle (major standstill to major standstill).

The length (left to right) of the diamond is 1.458 inches (blue circle), the radius of which falls precisely upon the station to the left, but marginally short of the station to the right. This value is coding the latter era lunar Pygon adopted by the Greeks.

A second circle (yellow) has a diameter of 1.728 inches (radius .864) and it falls precisely on the station to the right. This is one of the foremost navigational values of antiquity.

The 4 pattern line positions (edges of the 3 raised, incised humps), in 4 quadrants, comply to the following radii:

There is positive coding for .56 inches and .55 inches radius respectively (circle diameters of 1.12 & 1.1 inches respectively), with symbolic coding for .54 inches (1.08 inches diameter). The value 56 was used copiously in Sabbatical Calendar counts for the cycles of the Sun and Moon. The value 54 was very important for tracking the cycle of the Moon with mathematical ease.

The value 55 was very important to navigation under an "11" series of numbers and when a diameter, based upon 55 feet, is converted to a circumference it achieves 172.8 feet ("6&8" series...easily divisible within 360-degrees of arc) This goes some way toward explaining why the 1.728 inch code appears (left to right) in one of two centre diamond diameter codes. This relationship between a diameter based upon 55 feet, converting to a 172.8 circumference (using a navigational rendition of PI @ 3.141818182) was, obviously, much exploited in ancient chart plotting at sea. Alternatively, a diameter based upon 56 feet ("7&8" series) converts to 176 feet ("11" series...when using the PI rendition of 3.142857143 or 22/7). This is why the British preserved the concept of 1760 yards in a mile...traceable back to before

King Athelstan (circa 939AD), who, in his day, used the ancient "11" series measurements to create a "protective zone" around his person called "The Kings Girth".

.5184 inches radius (1.0368 inches diameter). This extremely important number was multi-use and, obviously, featured prominently in navigational chart plotting, where the straight line distance of 1 league (16500 feet) converts to a circumference of 51840 feet (easily divisible by 360-degrees).

.48 inches radius (.96 inches diameter). Again, a very important breakdown value in 360-degrees or as a fluid mathematical progression.

.44 inches radius (.88 inches diameter). An important "11" series navigational number. There were 440 Egyptian Royal Cubits of 20.61818182 inches each in the length of the Great Pyramid. (756 feet).

OTHER INCH RADIUS CODES AT THE 2ND, 3RD AND 4TH PATTERN POINTS (INNER DIAMOND).

The lozenge was a memory device, used for the recall of numerical values. It seems that, like an accountant's ledger book, it should tally up between at least 3 station points in each quadrant... those stations being:

The overall distance from the centre to the most extreme outer pattern point.

The overall distance from the most extreme pattern point back to the centre of the owl's eye.

The short distance from the centre of the lozenge to the centre of the owl's eye.

Certainly, the distance of length, pattern point to pattern point across the entire lozenge, seems to have been set at a recognisable, accumulative, coded value. However, it's unlikely that this tremendously difficult to achieve design feature had to apply to every consecutive coded distance amongst the inner diamonds, as the codes fall into quite different number families. An "11" series number is unlikely to produce a significant ratio value, for example, when added to a "6&7" series number, etc. It seems more likely that circle geometry coded values were achieved from the "owl eyes" stations, then subtlety adjusted to give the most precise possible mnemonic readings from other stations. The reader of the lozenge would visually detect, for example, that a station sat at .79 of an inch from a fulcrum station and would immediately think of 7920 leagues...the equatorial circumference of the Earth under the "11" series system. A station hovering around 1.57 would mean 1.575 and 1.5708 simultaneously, the full numbers having been learned by rote and repetition from "Masters of the Craft".

LEFT SIDE OF THE LOZENGE.

The overall distance from the centre of the lozenge to the outer pattern point was 3.6 inches. This was coding 360-degrees of arc. The return distance from the outer pattern point to the centre of the owl's eye was 2.916 inches. This value is 1/2 of 5.832 inches, which was related to the Roman "lunar" Pace @ 58.32 inches or the Greek lunar Pygon @ 14.58 inches (5 X 2.916 inches = 14.58 inches). The overall length of the Bush Barrow Lozenge was meant to be 7.29 inches, which is 2.916 X 2.5 inches (1/2 a Greek Pygon or 1/8th of a Roman Pace). The difference, therefore, between the overall distance to the outer pattern point and the distance back to the centre of the owl's eye is .684 inches. Half this value is 3.42. At Stonehenge one of the Station Stones was carefully placed at 342-degrees azimuth from site centre. 180-degrees opposed to that position was another Station Stone at 162-degrees azimuth. The mnemonic use of this value appears to be related to setting out a 360-degree circle into 20 positions with a spread of 18-degrees of arc, or 40 positions with a spread of 9 degrees of arc. The two remaining stations on the lozenge that haven't been mentioned, appear to be coded at .792 ("11" series navigation) and .729 or .729166666 (lunar or overland) inches respectively.

THE RIGHT SIDE OF THE LOZENGE.

There are two sets of coded values to consider on this side of the lozenge. One set relates directly to the length of the Menkaure Pyramid of the Giza Plateau and the other relates to half the base length of the Khafre Pyramid of the Giza Plateau. The most extreme pattern point marking complies to a position of 3.564 inches from the centre of the lozenge. Menkaure Pyramid was 356.4 feet long.

The "close proximity" overall distance from the centre of the lozenge to a marked intersection near the most extreme pattern point was coded to be 3.54375 inches. This is in homage to the lunar year @ 354.375 days. The return distance from the outer pattern point to the eye of the owl was 2.835 inches.

The Khafre Pyramid (Egypt's pyramid of the Moon) had a base perimeter length of 2835 feet, or 4 sides @ 708.75 feet each (15/16ths the length of the Great Pyramid @ 756 feet). Half of 708.75 is 354.375 (the number of days in a lunar year). The difference, therefore, between the overall distance and the distance back to the owl's eye is .70875 inches (the distance from the centre of the lozenge to the owl's eye station)...2.835 + .70875 = 3.54375. The two remaining pattern points by the owl's eye that haven't been mentioned, appear to be .81 (rounded PHI & true PHI) and .756 inches, respectively.

THE OVERALL LENGTH OF THE LOZENGE, OUTER TIP TO OUTER TIP.

Although measurements supplied by Mr. Paul Robinson of the Devizes Museum are only correct to the last millimetre (+ or -), it can be safely assumed that the astronomer/ artisan who fabricated the lozenge intended that it achieve a length of 7.29 inches. From the centre of the lozenge to the left end point should have achieved 3.6525 inches. This was in homage to the solar year @ 365.25 days. The length, therefore, requires that the distance from the outmost pattern point to the end exterior point be .0525

inches. This very important increment was the basis of many ancient measurement systems and, on the inner rim of the Sarsen Circle lintels at Stonehenge, 5.25 inches represented 1/2 a degree of arc.

The length to the right from the centre of the lozenge could be read in two main ways. It was either 3.564 inches + .081 inches or 3.54375 inches + .09375 inches. The 9375 mathematical progression was very important to compass and lunar determinations or navigation under the "11" series of numbers.

The entire diameter, in inches, is read as a string of accumulative codes in any of the following, perfect combinations of significant ancient numbers and useful ratio values:

.0525 + 2.916 + .684 + .70875 + 2.835 + .09375 = 7.29 inches (1/2 a Greek Pygon), or: .0525 + 3.6 + 3.54375 +.09375 = 7.29 inches, or: .0525 + 3.6 + 3.564 + .0735 = 7.29 inches, or: 3.6 + 3.564 + 1.26 = 7.29 inches or: 7.29 รท 2 = 3.645 - 3.54375 = .10125 or 7.29 รท 2 = 3.645 - 3.6 = .045, or: .0525 + 3.6 = 3.6525 (solar year = 365.25 days)...left side total, or: .070875 + 2.835 = 3.54375...length extending to a significant pattern point...(lunar year = 354.375 days).

There is some clever sharing, juggling or substitution of coded values to the left & right or overall, which introduces many very important mathematical progression values, like .10125 (lunar, navigation). The fact that every number in the above list was essential to ancient lunar, solar or navigational functions suggests strongly that this was the ancient, combined set of numbers built into the length of the Bush Barrow lozenge.

THE TOP OF THE LOZENGE TO THE BOTTOM.

It seems obligatory that the width of the Bush Barrow Lozenge and the length of the Clandon Barrow Lozenge were meant to be 6.18034 inches, outer edge to outer edge. The true dimension, in each case, might have been set to what was visually achievable at around 6.18 inches. This value (based upon PHI...10 inches รท 1.6180339) was the foundation formula for the fabrication of all "official" ancient circular volume vessels used by the cousin nations of the Mediterranean and, by association, Europe. By use of this value, all "official standard" vessels, cups or tubs would equate to exact cubic measures.

Those exact and precise volumes could then be transferred (poured) into other robust, sturdy, conveniently shaped and sized "amphora" jars, used for trading liquid or dry measure goods around the

Mediterranean Basin, or overland across Continental Europe and Africa. The Bush Barrow and Clandon Barrow lozenges, conceivably, were used for checking the integrity of "bushel" volume tubs in the ancient Wessex marketplaces to ensure that merchants were dispensing correct measures to their customers. A correct bushel tub would accommodate exactly 3 widths of the Bush Barrow Lozenge or 3 lengths of the Clandon Barrow Lozenge across its circular base.

THE REMAINING 3 CODES AT THE TOP OF THE INNER DIAMOND.

.6804 (lunar nutation), .63 ("6&7" series navigation, etc.), .5832 (lunar).

THE REMAINING CODES AT THE BOTTOM OF THE INNER DIAMOND.

.6875 ("11" series navigation), .64 ("8" series, compass), .594 (Menkaure Pyramid, navigation).

Beyond the foregoing diameters listed for circles within this section, individual values can be multiplied or divided by companion values to create square inch areas or ratios for use in astronomical or navigational determinations

.

The diameter width (red circle) of the 2nd diamond is 3.024 inches. This width is in homage to the perimeter value of the Great Pyramid (3024 feet...1/2 a minute of Earth equatorial circumference arc under the pyramid's "6&7" geodetic system....or 3025 feet...1/2 a minute of arc under the "11" series system). The length of the diamond (blue circle) is 3.52 inches (1.76 radius). This is accentuating the "11" series navigational system, incorporating the league (16500 feet), mile (5280 feet), furlong (660 feet), chain (66 feet), rod/ perch (16.5 feet), fathom (5.5 feet) and link (7.92 inches). The yellow circle, sitting adjacent to the outer blue circle, is 3.5 inches wide (1.75 radius). This code would also have been included, as it provides an important conversion ratio for elevating 7th segments of a 360 degree circle into whole number values in a 630-degree circle. Therefore, 51.42857143 -degrees X 1.75 = 90.

The 4 pattern line positions (edges of the 3 raised, incised humps), in 4 quadrants, comply to the following radii:

The outermost pattern line is touched by a circle (blue) of 1.134 inches. The circle has a diameter, therefore, of 2.268 inches. The Great Pyramid is 756 feet per side and a total of 3 sides equates to 2268 feet. This is a very important lunar code and 3 X 2268 = 6804...the duration in days of the lunar nutation

cycle. The width of the Station Stones rectangle at Stonehenge is 113.4 feet and carries the nutation cycle code also.

The second pattern line is touched by a circle of 1.1 inches radius or 2.2 diameter. This is "11" series coding. The circular design width of the Sarsen Circle at Stonehenge was 110 feet, although it was made slightly elliptical to achieve 113.4 feet from 225-degrees azimuth to 45-degrees azimuth.

The third pattern line is touched by a circle of 1.066666 inches radius or 2.1333333 inches diameter. This was a simple conversion ratio for 15/16ths. The Great Pyramid's length @ 756 feet รท 1.0666666 = 708.75 feet (the length of the Khafre Pyramid).

The fourth pattern line is touched by a circle of 1.03090909 inches or 2.061818182 inches diameter. This circle is of extreme importance and means upwards of 6 things simultaneously. This circle is in homage to the equatorial circumference of the Earth and the 6 major types of Egyptian Royal Cubits that carried the equatorial circumference formula in their lengths. This is what they did: SYSTEM 1. AN EQUATORIAL CIRCUMFERENCE OF 25000 MILES.

The rod for this system would be 20.833333 inches X 1200 = 25000 (read as miles).

The 25000-mile circumference concept was, probably, only ever a convenient way of describing the approximate circumference of the Earth. Under this calibration the Earth would be 132000000 feet in equatorial circumference, which is an excess on the modern, accepted circumference (24902-miles) by 98-miles.

SYSTEM 2: AN EQUATORIAL CIRCUMFERENCE OF 24883.2-MILES.

The rod for this system would be 20.736 inches X 1200 = 24883.2 (read as miles).

This is, plausibly, the ancient "true" size of the equatorial circumference (12 X 12 X 12 X 12 X 1.2-miles).

One second of arc for this circumference would be 101.376 feet, and that's the width of the stybolite platform upon which the Parthenon of Athens sits. Ancient surveying markers, still intact in the Waitapu Valley of Northern New Zealand, sit 12441.6 feet distant from each other (12441.6 X 2 = 24883.2). These were anciently erected by New Zealand's now extinct "Stonebuilder" population.

SYSTEM 3: AN EQUATORIAL CIRCUMFERENCE OF 24857.95455-MILES.

The rod for this system would be 20.71496212 inches X 1200 = 24857.95455 (read as miles).

This is a shared Egyptian, Greek and Roman system that works in progressions of the number "7". It seems to be founded upon 5000 Egyptian Atur of 26250 feet each (5 Greek miles). One of the concepts of ancient metrology, which survived into mediaeval times, was that 75 Roman miles represented 1degree of arc for the world, although scholars of the time had, seemingly, no lingering knowledge of the actual, former length of a Roman foot...until professor of geometry, John Greaves did a careful reassessment, in Rome, in 1639AD.

If we multiply a foot of 11.66666 inches X 5000 we get a Roman mile of 58333.3333-inches (or 1000 Roman Paces). If 75 such Roman miles represent 1-degree of arc for the world, then that equates to 4375000-inches or 364583.33333 British feet of 12-inches each. This value, multiplied by 360 = 131250000 British feet or 135000000 Roman feet. These lengths are also 12500000 Hebrew Reeds of 10.5 feet each or 125000000 Greek feet of 12.6-inches each. Essentially, this very plausible coded representation for the size of the Earth is a purely "7" series way of calibrating the equatorial circumference. The sum of 131250000 feet equals 24857.955455 British miles, 27000 Roman miles or 25000 Greek miles. This same circumference was probably 5000 Egyptian Atur of 26250 British feet each. The 131250000 British feet calibration does not work at all well according to the 5280 feet mile, which is an "11" series numerical progression. It does, however, break down very well into degrees, minutes and seconds of arc under the Egyptian, Assyrian, Greek, Hebrew or Roman "7" series measurement increments.

SYSTEM 4: AN EQUATORIAL CIRCUMFERENCE OF 24750-MILES.

The rod for this system would be 20.625 inches X 1200 = 24750 (read as miles).

This was, undoubtedly, a much used system and the most popular for "straight line" sailing, as it's founded upon an "11" series of numbers and became the basis of the ancient British league (16500 feet), mile (5280 feet), furlong (660 feet), chain (66 feet), rod/ perch (16.5 feet), fathom (formerly 5.5 feet) and link (7.92 inches) measurement system. Under this early Egyptian system the Great Pyramid was considered to have a base perimeter of 3025 feet (55 squared) instead of 3024 feet. This method of reading the Great Pyramid required the symbolic elongation of each side by 3 inches, such that they would comply to "11" series numbers and 3025 feet was called 1/2 a minute of equatorial circumference arc for the Earth.

SYSTEM 5: AN EQUATORIAL CIRCUMFERENCE OF 24741.81818-MILES.

The rod for this system would be 20.61818182 inches X 1200 = 24741.81818 (read as miles).

This is the "literal" Great Pyramid system for calibrating the size of the Earth in a combined "6 & 7" mathematical progression reading (based upon the number 42). It appears to have been the most used system, in consideration of the "6& 7" measuring capability built into all known measurement standards of the ancient Mediterranean Basin. Although the "7" based measurements disappeared from general use in Britain during the latter Christian era, the "6" and "11" based measurements remained. The ancient "7" based Mediterranean measurements are found, however, to be strongly represented in the Bush Barrow and Clandon Barrow lozenges, indicating that such measurements were alive and well in England when the lozenges were fabricated.

Under the "6 & 7" system the Great Pyramid's perimeter was read as 3024 feet and this represented 1/2 a minute of equatorial arc for the Earth. The circumference of the Earth was read as 130636800 feet and this broke down very fluidly into degrees (362880 feet...the literal perimeter measurement of the Great Pyramid was 36288 inches), minutes (6048 feet...two circuits of the Great Pyramid was 6084 feet) and seconds (100.8 feet... the inner diameter of one section of the slightly elliptical Sarsen circle at Stonehenge is 100.8 feet). The 6, 7, and 11 systems were wonderful to navigate by, converting linear distances covered into easily decipherable chart plotting circles that would break down into degrees, minutes and seconds of arc. Under these systems, calculating degree angles from point of departure to destination was simple to accomplish and the relative position of the ship could always be known.

SYSTEM 6: AN EQUATORIAL CIRCUMFERENCE OF 24711.79047-MILES.

The rod for this system would be 20.59315873 inches X 1200 = 24711.79047 (read as miles).

The Great Pyramid was built in such a way that all of its dimensions could be read (symbolically) according to PHI increments. The literal dimensions of the Great Pyramid break down into increments of 1.62 inches and the PHI ratio is 1.6180339 (rounding upward to 1.62). This duality of reading is found on many European/ Mediterranean/ Indus Valley/ American/ Oceanic monuments of antiquity, where the dimensions can be read in either rounded PHI or pure PHI increments. This is certainly true of Stonehenge. The Great Pyramid's length could be read as 280 rounded Megalithic Yards (of 32.4 inches...756 feet...literal length) or 280 true Megalithic Yards of 32.360678 inches (755.0824867 feet...symbolic PHI length). This would mean that 1/2 a minute of equatorial arc, under the pyramid's pure PHI assignment, would be 3020.329947 feet.

The PHI ratio was difficult to work with, due to the complex numbers it produced, nevertheless the ancient mathematicians found several methods to "tame" PHI and one of these was to use (at least) "rounded PHI" in all or most major building applications. Many statuettes or panels of antiquity incorporated pure PHI dimensions. The majority of circles at Stonehenge (except where carrying other types of coding...such as in the case of "Z" Holes) are in a pure PHI relationship to each other, but reduce in whole number diameters (466, 288, 178, 110 feet respectively, etc.) in a clever numerical manipulation of PHI.

This is a picture of the huge Octagon of Newark Ohio, redrawn exactly to scale in AutoCAD over an official survey map. The 1958 survey was conducted by Abrams Aerial Survey Corporation of Lansing, Michigan for the City of Newark, Ohio. The official survey charts were donated to this researcher for "Octagon analysis" by researcher Patricia Mason of Newark, Ohio http://greatserpentmound.org/articles/giants.html . The coloured lines appearing on this above drawing show how the selfsame angle, length and Earth equatorial values, encoded in micro-scale within the Clandon Barrow and Bush Barrow lozenges, were encoded in macro-scale within the giant Octagon, geometric earth embankment complex. Here's an explanation of what the coloured lines mean:

The red line, running up diagonally from the lower left to the upper right, is on an azimuth angle of 51.84-degrees. This is exactly the same degree angle as one arm of the central crosses of both the Clandon Barrow and Bush Barrow lozenges.

The red line, referred to, runs for exactly 2835 feet from a specially formed, small alcove at the front of the altar, to the uttermost extremities of the site. The line stops precisely at a central point of the gateway, in line with the outer edge of the converging mounds to each side. The Khafre Pyramid @ 708.75 feet per side has a perimeter value of 2835 feet. This distance, in feet, would represent, in days, 8 lunar years of 354.375 days each.

The overall length of the whole Octagon complex ( from the rear of the altar to the extremity postion of the gate) was coded to be 2880 feet. The Aubrey Circle at Stonehenge is 288 feet in diameter and this is one of the most dynamic values of antiquity, occurring on many sites.

Just as 2835 is a lunar code, so also is 1701 (the diamonds housing the St. Andrew's Cross arms on both the Clandon Barrow and Bush Barrow lozenges were encased within circles of 1.701 inches). The value 1701 is coding 1/4th of the lunar nutation cycle of 6804-days.

The red line running up to the left from a small circle complex, adjacent to the Octagon, is on an azimuth angle of 311.04-degrees. This is exactly the same degree angle as one arm of the central crosses of both the Clandon Barrow and Bush Barrow lozenges.

The red line just mentioned runs for 1313.83296 feet (AutoCAD generated), brushing the edge of a specially built earth peninsula, to touch the nose position of the 2nd tier of the small mound. Although the present, dilapidated state of the small mound, after, possibly, thousands of years of neglect and erosion, might show 2 feet of error in the reading, the intended distance code was, originally, 100000th of the "true" equatorial circumference of the Earth @ 24883.2 miles (12 X 12 X 12 X 12 X 1.2 miles) or 131383296 feet.

The azimuth angle of this red line is 311.04-degrees. With the world equatorial circumference set at 24883.2-miles, a 1/8th segment would be 3110.4-miles.

From the centre of the circle embankment component of the Octagon to the centre of the octagonal component, the distance is 1555.2 feet. This is half of 3110.4 feet and, if feet were substituted for miles, 1555.2 miles would represent a 1/16th segment of the "true" equatorial circumference of the Earth.

THE EQUATORIAL CODES FALLING ONTO THE SMALL MOUND PENINSULA AT THE OCTAGON.

The largest value encountered in sites or artefacts, describing the equatorial circumference of the Earth, is 25000 miles or 132000000 feet. As stated, this seems to be based upon an Egyptian Royal Cubit of 20.8333333 inches length. Under such a system, 1/8th of the circumference would be 3125 miles. In accordance with the system used to code the 24883.2-mile system, a line (yellow) is sent out for 1320 feet at an azimuth angle of 312.5-degrees. The line touches the base tier of the small mound. This position was, undoubtedly, once marked by a stone at the Octagon. It's interesting to note that "Z" Holes, at Stonehenge, is 132 feet in diameter and that an ancient league (16500 feet) was 3.125 miles.

A Roman calibration for the equatorial circumference was 131250000 feet (27000 Roman Miles, 25000 Greek Miles, 24857.95455 British miles or 5000 Egyptian Atur). A line (green) is sent out for 1312.5 feet at an azimuth angle of 310.724-degrees. It nicely dissects the earth peninsula appendage, which seems to have been built specifically to accommodate the 24883.2-mile coding brushing to the peninsula side.

THE GATEWAY CODES AT THE OCTAGON.

The primary purpose of the small mound was related to special codes running between the other small inner mounds and this geodetic coding seems to have been a secondary function. The more generally used Earth equatorial circumference codes, lending themselves very fluidly to world navigation, were separated out and placed into the gateway. These were accompanied by the PHI equatorial coding

system, which was probably only ever used in certain scientific calculations to do with PHI harmonics in nature (the way nature works). Let's look at these other systems, situated over in the gateway.

The "11" series was a marvelous mathematical system that worked in conjunction with the "6&7" system. If the "11" system was to be used for straight line sailing, then the circumference generated by it would be "6" based (and perfectly divisible by 360-degrees). The "11" system described the Earth as 7920 leagues or 24750 miles. It appears to be coded as 1452 feet at the Octagon (.088 leagues, .275 miles, 2.2 furlongs, 22 chains, 88 rods/ perches, 264 fathoms or 2200 links). A 1/8th segment of 24750 feet is 3093.75 miles and the coded position would have sat at 309.375-degrees azimuth accordingly.

This limit falls to the centre nose line of the gateway mounds to each side, with the line terminating right of centre.

The "6&7" geodetic coding extends to the outer line of the gateway mounds at 1458 feet (1200 Greek lunar Pygons of 14.58 inches each or 300 Roman Paces of 58.32 inches each. This length was also 900 "rounded" PHI feet (1.62 feet) or 10800 "rounded" PHI inches. The 1458 feet distance would be 1/89600ths of the equatorial circumference under the Great Pyramid "6&7" assignment. It can also be represented as 1458.333333 feet, which would have been more common in overland measurements, as its companion measurement 1458 was for lunar coding. The line sits just right of centre in the gateway.

The "6&7" system doubles as a "rounded" PHI system, as shown, but there was a "pure" PHI system as well, probably used in assessing growth attributes of plants and harmonic aspects within nature (further research might tell us more about how advanced those concepts were within the ancient sciences).

Under this assignment, the Earth would have been viewed as having an equatorial circumference of 24711.79048 miles. A 1/8th segment of the Earth, under this calibration. would be 3088.9738 miles. Our coded line, therefore goes out on an azimuth angle of 308.89738-degrees. Whereas the 1458 feet measurement was 10800 "rounded" PHI inches, this one will be 10800 "true" PHI inches of 1.6180339 inches each, or 1456.2305 feet. This line extends slightly to the exterior of the gateway embankments and just left of centre. It also, plausibly, would once have been marked with a stone.

Lines within the Octagon, originating at the centre of a very important, small embankment circle situated exterior to the Octagon. The black line represents the PHI coding of the equatorial circumference. The blue line represents the Great Pyramid's "6&7" equatorial assignment. The magenta line represents the "11" series equatorial assignment. The Green line represents the "Roman" "7" series equatorial assignment. The red line represents the "true" equatorial assignment. The yellow line represents the largest assignment of 25000 miles.

THE DIAMOND POINTS ON THE BUSH BARROW LOZENGE... TO THE LEFT.

Radius measurements to the 3 stations not mentioned are 1.71 (compass), 1.666666 (3,4,5 triangle) and 1.6180339 (PHI) inches respectively.

THE DIAMOND POINTS TOP.

Radius measurements to the 3 stations not mentioned are 1.458 (lunar), 1.4 (calendar, navigation), 1.3608 (lunar nutation) inches respectively.

THE DIAMOND POINTS TO THE RIGHT.

Radius measurements to the 3 stations not mentioned are 1.71 (compass), 1.666666 (3,4,5 triangle) and 1.6180339 (PHI) inches respectively.

THE DIAMOND POINTS BOTTOM.

Radius measurements to the 3 stations not mentioned are 1.458 (lunar), 1.4 (calendar, navigation), 1.3608 (lunar nutation) inches respectively.

Moving outward to the next diamond, which gives 3 closely associated codes in the width of the diamond top to bottom (combined circles blue, yellow, green). The code to the top of the diamond is 2.24 inches radius. This value provides a mathematical progression that applies to navigation under the Great Pyramid "6&7" Earth equatorial circumference assignment. A progression incorporating 2240 was adopted by King Henry VII after 1527 AD for the new English ton and associated weights, which had also been used earlier in Egypt. The ancient Egyptians used a "Sep" of 7000 grains, the same as King Henry VII's pound.

The 4 outer points of the diamond swing close to the zigzagging "V" chevrons and stations on the points of the chevrons provide 2 further dynamic codes. One of these is 2.25 inches, which was used copiously in the 360-degree compass system. The sum of 22.5-degrees would be 1/8th of a 360-degree circle.

Perhaps the most important value, positively coded into this section, is a circle (green) with a radius of 2.268 inches (4.536 inches diameter). The circle sweeps to the points of the chevron, top and bottom and has been very carefully encoded. The Great Pyramid's flat altar floor was mathematically calculated to sit at a vertical height of 453.6 feet. A rule of 3,4,5 triangles was applied to achieve this height, wherein the pyramid's base length (756 feet) was divided by 1.66666 to achieve 453.6 feet. In all 3,4,5 triangles one side will always be 1.666666 less than the hypotenuse. It is in the pyramid's length

assignments, as opposed to it's vertical height assignments, that the codes for the size of the Earth are found, as well as the formula for correctly fashioning individual Egyptian Royal Cubits that comply to particular Earth size assignments in different number families.

The radius length of the diamond is 2.66666 inches or 5.333333 inches in diameter (red circle). It will be remembered that the 1.0666666 ratio (15/16ths conversion formula) was very important to ancient astronomers and 5.333333 is half of 10.6666666. This same width aspect of the diamond was also read as 2.64 inches radius and 5.28 inches diameter (yellow circle), for coding the "11" series overland distance system (5280 feet in a mile).

The 4 pattern line positions (edges of the 3 raised, incised humps), in 4 quadrants, comply to the following radii:

1.728 inches radius (3.456 inches diameter). This is a tremendously important navigational number. The diameter of Silbury Hill in Southern England was intended to convey 550 feet to produce a circumference of 1728 feet (using PI @ 3.141818182). The outer rim of the Sarsen Circle at Stonehenge was intended to convey 345.6 feet, base upon a diameter of 110 feet. This relationship between an "11" series diameter producing a "6" series circumference (divisible by 360-degrees) would have been the basis of chart plotting by navigators traversing the open seas in antiquity. We know ancient European/ Mediterranean peoples got as far afield as New Zealand (the far Isles of the Earth) thousands of years ago, as they left their code bearing structures all over the landscape. It is from the ancient New Zealand structures that this researcher has relearned the mathematical principles, whereby the Bush Barrow and Clandon Barrow lozenges of the Northern Hemisphere can be deciphered.

Another diamond pattern line (bottom left) complies to a circle radius of 1.75 inches and closely complies to 1.76, which it would have also, mnemonically, represented. The 1.75 ratio was used to elevate difficult 7th readings in a 360-degree arena to easy to read whole numbers in a 630-degree arena. The Brasen Sea calculator in the Temple of Solomon outer courtyard was a 630 degree calculator, as was the Sarsen Circle inner rim at Stonehenge (circumference 315 feet or 630 feet รท 2). The 1.76 coding refers, of course, to "11" series navigation. A diameter based upon a "7&8" number like 56 will produce an "11" series circumference like 176 using the PI rendition of 22/7 (3.142857143).

The second circle (red), falling upon the 2nd pattern line of the diamond on 3 sides has a radius of 1.6875 inches or a diameter of 3.375 inches. A progression based upon 1.6875 produces many useful lunar, calendar or compass values.

Another pattern line at the bottom left allows for a reading of 1.71 or 1.71875 inches respectively. These values produce reasonably useful progressions related to 18 degree segments in a 360 degree circuit (1.71 progression) or values used in "11" series navigation.

The third pattern line (blue) is brushed by a circle of 1.65 inches radius (3.3 inches diameter). This is, of course, related to "11" series navigation and the rod/ perch was 16.5 feet or the ancient league 16500 feet...3.125 miles.

Another pattern line at the bottom left complies to a circle radius of 1.68 feet or diameter of 3.36 inches. A mathematical progression based upon 1.68 will produce values that are very important to navigation under the Great Pyramid "6&7" series assignment (based upon the number 42). There was an early Israelite cubit of 1.68 inches. 3,4,5 triangles with an adjacent of 126 feet, an opposite of 168 feet and a hypotenuse of 210 feet were used at Stonehenge between the posts of the Aubrey Circle. The triangles, which would have been formed by ropes brushing the posts, were for calculating the azimuth angles of stars alighting onto the embankments. See: http://www.celticnz.co.nz/US16.html

The fourth pattern line is brushed by a circle of 1.62 inches radius or 3.24 inches diameter. This is a rounded PHI increment and means 1.6180339 and 3.2360678 inches respectively as well. The measurement interval found by Professor Alexander Thom on ancient, weatherworn British monument sites and dubbed by him as the "Megalithic Yard" was, undoubtedly, (originally) a PHI based increment of 32.360678 inches. Thom averaged it to 82.9 centimetres (32.637795 inches).

THE OTHER PATTERN POINT CODES

The length of the 3rd outward diamond is, as stated, 5.33333 inches, for a radius of 2.666666 inches.

The other stations are:

2.625 inches radius (5.25 inches diameter). This is the base increment of the reed (126 inches) much used in lunisolar calendar calculations. The latter Greek measurement system was mostly based upon 525. Their mile was 5250 feet. This position is dual coded and can also mean 2.618. This number provides a mathematical progression leading to 31.416. PI is 3.1416.

2.57142857 inches radius (5.142857143 inches diameter). These values are not as difficult as they look and are simply expressions of 7th segments of 360-degrees. For calendar work, especially, circles had to be divided up and read in 7ths. The diameter in this case (5.142857143 inches) is expressing 1/70th of 360-degrees.

2.52 inches radius (5.04 inches diameter). The Great Pyramid @ 756 feet is 3 X 252 feet. The Assyrian Royal Cubit was 25.2 inches and the Greek foot used in most applications was half that value @ 12.6 inches. These values were very useful in navigation and also for calculating lunar periods within the lunar nutation cycle and the Sabbatical Calendar.

The width of the 3rd outward diamond is, as stated 4.48 inches, for a radius of 2.24 inches. The other stations are:

2.2 inches radius (4.4 inches diameter). These increments refer, of course, to "11" series navigation.

2.16 inches radius (4.32 inches diameter). The Great Pyramid @ 756 feet was 432 Hebrew/ Celtic Royal Cubits of 21 inches each in length. In the Precession of the Equinoxes (25920 years) the Sun spends 2160 years in each house of the zodiac. The Moon is 2160 miles in diameter.

2.112 inches radius (4.224 inches diameter). These values are expressions of the "11" series mile @ 5280 feet and 21120 feet would be 4 miles.

The final section of the Bush Barrow Lozenge. We have already discussed the string of codes running through the length of the lozenge and will now discuss the width codes, top to bottom. The overall distance (red circle) was 6.1804 inches. The upper tip of the lozenge, especially, appears to be slightly rounded and it would appear to have suffered some impact damage. If one follows the natural edge lines on each side, they indicate that a slight elongation of the lozenge is reasonable to bring it to a much improved point. Here's how the code string runs from top to bottom.

Overall distance = 6.1804 inches (PHI related code for correct fabrication of volume vessels).

Distance from the centre to the top outer edge, coded to be 3.07 inches (used as 3.072"... navigation).

Distance from the centre to the top pattern point = 2.9866666 inches (special conversion ratio).

Distance from the outer edge to the top pattern point = .08333333 inches (3,4,5 triangle code).

Distance from the top pattern point to the centre of the owl's eye = 2.4 inches (compass, calendar).

Distance from the centre to the owl's eye = .586666666 inches ("11 series navigation).

Distance from the centre to the bottom outer edge = 311.04 inches (true equatorial circumference 1/8th code).

Distance from the centre to the bottom pattern point = 3.024 inches (Great Pyramid, 1/2 minute of arc).

Distance from the bottom outer edge to the bottom pattern point = .0864 inches (solar, navigational).

Distance from the bottom pattern point to the owl's eye = 2.43 inches (lunar nutation cycle, Sabbatical Calendar).

Distance from the centre to the bottom owl's eye = .594 inches (Menkaure Pyramid, "11" series navigation).

CIRCLES TOUCHING THE OUTERMOST DIAMOND PATTERN LINES.

2.4 inches radius (4.8 inches diameter). This circle (blue) sweeps to the outer edge of the lozenge.

2.304 inches radius (4.608 inches diameter). This circle sweeps to the outermost pattern line. It carries a very important "11.52" code, much used in antiquity. The Great Pyramid had a base length of 756 feet, a side diagonal length of 576 feet and a flat top altar that was 44 feet square. Therefore, the area of each face was 230400 square feet, or 8 Egyptian acres of 28800 square feet each. The Menkaure Pyramid, under its PHI assignment, was 11.52 Pyramid acres for all faces and the area occupied by the base.

2.268 inches radius (4.536 inches diameter). Three sides of the Great Pyramid (756 feet per side) = 2268 feet (lunar code). The vertical height of the Great Pyramid to the top of its altar floor was 453.6 feet (lunar and navigation).

2.24 inches radius (4.48 inches diameter). This value was used in navigation under the Great Pyramid "6&7" assignment. It was also used for lunar calculations.

2.2 inches radius (4.4 inches diameter). This value was used in "11" series navigation.

THE PATTERN POINT CODES.

At the outermost pattern point sets, the artisan, engaged in marking the gold sheet, added considerable extra coding. This was done by allowing a diagonal line, coming from the left or right, to not meet at a common intersection. A line coming up from the left, for example, might terminate at a slightly more outlying position. It's obvious that the astronomer/ artisan was "packing in" as many close proximity codes as possible. Here are the identifiable codes residing in each quadrant:

LEFT POINTS @ 270-DEGREES.

3.6 inches radius (7.2 inches diameter). The position was dual coded to also mean 3.571428571 inches.

Again, this number isn't as difficult to conceive of as it might first appear, and is simply a "7th"

expression within 360-degrees. Under the ancient Earth equatorial circumference assignment a distance of 100.8 feet was 1 second of arc. 360-degrees รท 100.8 = 3.571428571-degrees. In a "7" series compass, based upon 630-degrees (like the inner rim of the Sarsen Circle at Stonehenge), this position would be 6.25-degrees (3.571428571 X 1.75).

3.52 inches radius (7.04 inches diameter). This value relates to the "11" series navigational system.

3.4722222 inches (6.944444). This relates to an Earth equatorial circumference system based upon an Egyptian Royal Cubit of 20.833333 inches. Under this system the Earth was considered to be 25000 miles in circumference. The position was dual coded to also mean 3.456 inches (6.912 inches diameter).

This relates to the "true" equatorial circumference, which uses an Egyptian Royal Cubit of 1.728 feet (20.736 inches), for a circumference of 24883.2 miles. The outer rim of the Sarsen Circle at Stonehenge was 345.6 feet in circumference.

3.402 inches radius (6.804 inches diameter). There are 6804 days in the lunar nutation cycle, major standstill to major standstill.

TOP POINTS @ 0 - 360-DEGREES.

2.9866666 inches radius (5.97333333 inches diameter). This is a special ratio used for working in a compass circle of 56 positions (like the 56 posts of the Aubrey Circle at Stonehenge) 56 รท 2.98666666 = 18.75. The Great Pyramid's perimeter 3024 feet รท 2.9866666 = 1012.5 (a very useful lunar value).

Application of this ratio turns the perimeter of the Great Pyramid into a lunar or Sabbatical Calendar calculator, based upon 56 positions (7 X 8...28 X 2). This station on the lozenge would have been double coded to also mean 2.97 and relate to readings in "11" series and "rounded PHI" (1.62) simultaneously A combination of these values was encoded into the base dimensions of Menkaure Pyramid. That pyramid had a design length of 356.4 feet or 12 X 2.97 feet. The length also equates to 220 X 1.62 feet. The way the pyramid was designed allowed it to be read in either rounded PHI (1.62) or "pure" PHI (1.6180339) increments. The exact dimensional PHI ratio relationship that existed between the Aubrey Circle and "Y" Holes at Stonehenge, also existed between Menkaure Pyramid's side diagonal length to the apex and half the base length (under the pure PHI assignment of 288 feet to 178 feet)... 178 X 1.6180339 = 288.

2.9333333 inches radius (5.866666 inches diameter). This relates to "11" series navigation using the mile @ 5280 feet.

2.888888 inches radius (5.777777) inches diameter). This is a "13" based progression used in calendar calculations. The Sabbatical Calendar ran for 7 full years without correction, based upon 13 months of 28 days per year (364 days). The solar cycle would be allowed to accrue 1.25 days of error per year,

which was corrected during a festival at the end of the 7th or Sabbatical year. This station on the lozenge also codes 288, a foundation, multi-use number of tremendous importance.

2.857142857 inches radius (5.714285714 inches diameter). This relates to dividing up a 360 degree circle according to "reed" values (126 inches). 360 รท 126 = 2.857142857-degrees. This value would be 5 degrees in a 630-degree compass, like the inner Sarsen Circle rim at Stonehenge.

The right hand side of the lozenge is particularly laden with extra codes, as a much magnified, high resolution photo of the lozenge will verify. Under magnification it is seen that lines from separate quadrants, which should, technically, intersect, don't do so but sit at staggered, extended points from each other. Here is the result of assessing the positions within the exacting confines of AutoCAD.

RIGHT SIDE POINTS @ 90-DEGREES.

3.571428571 inches radius (7.142857143 inches diameter). Again, this code is not as difficult as it looks.

It's merely the result of dividing 360 degrees by 100.8. Under the Great Pyramid's "6&7" navigational system 100.8 feet represented 1 second of arc. The diameter of the inner Sarsen Circle, rim to rim, through one section, was measured as 100.8 feet. This same station on the lozenge would have also meant 3.564 inches and relate to the base length codes of the Menkaure Pyramid (356.4 feet). The perimeter of Menkaure complied to 54 divisions of 26.4 feet ("11" series). The lunar cycle counts (2551.5 or 6804) also worked exceedingly well to 54 divisions.

3.54375 inches radius (7.0875 inches diameter). The sum of 354.375 days is the length of the lunar year.

The Khafre Pyramid had a design length of 708.75 feet (15/16ths the length of the Great Pyramid).

3.5 inches radius (7 inches diameter). This is simple "7" series navigational or calendar coding, but would also have meant 3.52 inches radius (7.04 inches diameter) and relate to "11" series navigation.

3.456 inches radius (6.912 inches diameter). Again, one of the dynamic codes of antiquity, relating to the "6&7" navigational system found on the Great Pyramid or the outer rim of the Sarsen Circle at Stonehenge.

3.42 inches radius (6.84 inches diameter). One of the Station Stones positions at Stonehenge resides at 342-degrees, with another 180-degrees opposed at 162-degrees. This is suggestive of dividing a 360degree circle into 20 positions of 18-degrees each.

3.402 inches radius (6.804 inches diameter). This is in homage to the lunar nutaion cycle of 6804 days.

3.375 inches radius (6.75 inches diameter). This value is part of a mathematical progression used to track positions arrived at in the lunar cycle or Sabbatical Calendar. The station would have been dual coded to also include 3.36 inches radius and 6.72 inches diameter to provide useful values within the Great Pyramid's "6&7" navigational system. There would be 15 X 6.72 feet in 100.8 feet (1 second of arc under the "6&7" system).

THE BOTTOM POINTS @ 180-DEGREES.

3.024 inches radius (6.048 inches diameter). The Great Pyramid @ 756 feet per side has a perimeter value of 3024 feet. Twice the perimeter value (6048 feet) is 1 minute of equatorial circumference arc for the world under the Great Pyramid's "6&7" geodetic assignment.

2.986666 inches radius (5.9733333 diameter). Again, the special ratio for working in a circuit of 56 positions is encoded into this quadrant of the lozenge.

2.97 inches radius (5.94 inches diameter). Again, the Menkaure Pyramid rounded PHI and "11" series incremental readings are encoded into the bottom stations of the lozenge.

2.933333 inches radius (5.866666 inches diameter). This ratio could be used used to break circuits, based upon miles, into 1/18th segments. The station would have been triple coded to mnemonically carry the values of 2.9166666 (5.833333 diameter) and 2.916 (5.832 diameter) inches, respectively, as well.

2.88888 inches radius (5.777777 inches diameter). If the Great Pyramid's perimeter of 3024 feet is multiplied by 2.8888888 then the resultant value is 8736, which is the number of hours in 364 days...the raw count figure used in the 13 months, of 28 days each, solar year. This 364 day system was allowed to run for 7 years without disruption, before correction, although some groups, like the Hebrews, had a "double Sabbath" once a year to make the annual count 365 days. This meant a correction (for them) of only 42 hours at the end of each 7th year. Others simply made up the lost time at the end of 7 years in a festival that added 8.75 days to the calendar count. This station on the lozenge would have been dual coded to also mean 2.88 inches (multi-use number).

TO THE ENDS OF THE EARTH.

Here in New Zealand, at the furthest reaches of the globe, an ancient purpose placed tor mound, situated upon the northern ridge of the Waitapu Valley, sits 7000 Hebrew/ Celtic Royal Cubits from a laboriously carved, surveying "benchmark cleft" on the sea cliff.. The azimuth angle from this equally ancient benchmark cleft, to the southern face of the tor mound, is 51.84 degrees (the slope angle of the Great Pyramid or azimuth angle through the centre of the huge Octagon earth embankment complex of Newark, Ohio).

At the same time, the northern ridge tor mound centre sits 11520 feet from the southern hubstone of the very impressive Waitapu standing stone observatory, on an azimuth angle of 59.0625-degrees. Half of this value is 29.53125 and that happens to be the number of days in a lunar year. The rising, diagonal face length to the apex of Khafre Pyramid, under the 3,4,5 triangle rule by which it was built, was 590.625 feet...half of which is the azimuth angle between the centre of the northern tor mound and the huge hubstone at Puketapu Hill's lower observatory site.

The line from the observatory to the northern ridge tor mound turns 120 degrees and goes for 11520 feet to a standing stone marker on Puketapu Hill, where there's another large observatory composed of about 200 cairns. At the Puketapu Hill marker the line turns 120-degrees and runs for 11520 feet to the southern hubstone of the Waitapu Observatory, forming a perfect equilateral triangle. The 11520 feet distance on each side of the triangle is .8 of a Geomancer's mile from ancient Britain.

Another line extends for 12500 feet from the northern ridge tor mound to the huge hubstone of Puketapu Hill's lower plateau alignment site. The azimuth angle of this line is 295.3125-degrees, again accentuating the 29.53125-days in the lunar month. Under the largest "10" series, ancient calibration, which viewed the size of the Earth as 25000 miles of equatorial circumference, this distance would represent 1/10560th part (2/5280ths). If the 12500 feet were called miles, then this distance would mnemonically code half of the equatorial circumference. A cairn, 100 feet beyond the hubstone, marks a distance of 12600 feet from the northern ridge tor mound, or 1200 Hebrew Reeds. This distance is 1/10368th or 2/5184ths of the equatorial circumference under the Great Pyramid geodetic assignment.

The distance from the huge hubstone on Puketapu Hill's lower overland alignment site to the southern hubstone of the Waitapu Observatory is 11340 feet, at an azimuth angle of 172.8-degrees. The 11340 feet distance is a very prominent lunar code. It is the exact distance equivalent of 15 sides of the Great Pyramid or 16 sides of the Khafre Pyramid, on the Giza Plateau of Egypt. The 11340 distance is in mnemonic reference to a day count interval within the 6804-day lunar nutation cycle (major standstill to major standstill) wherein 1134-days equals 1/6th of that period. The width of the Station Stones rectangle at Stonehenge is 113.4 feet. The azimuth angle of 172.8-degrees carries one of the most significant navigational principles of antiquity in its numerical value.

On the back of a dollar bill, you can see a pyramid with a flat top. No one has been able to explain why the Great Pyramid would have been built without a capstone.

This is an interesting story associated with a visit to the top of the great pyramid. Many tourists have climbed to the top, which is not an easy journey. One such person was Sir Siemen’s, a British inventor.

He climbed to the top with his Arab guides. One of his guides called attention to the fact that when he raised his hand with outspread fingers, he would hear an acute ringing noise. Siemen raised his index finger and felt a distinct prickling sensation. He also received an electric shock when he tried to drink from a bottle of wine that he had brought with him. Being a scientist, Siemen than moistened a newspaper and wrapped it around the wine bottle to convert it into a Leyden jar (an early form of a capacitor). When he held it above his head, it became charged with electricity. Sparks then were emitted from the bottle. One of the Arab guides got frightened and thought Siemen was up to some witchcraft and attempted to seize Siemen’s companion. When Siemen’s noticed this, he pointed the bottle towards the Arab and gave him such a shock that it knocked the Arab to the ground almost rendering him unconscious. When he recovered, he took off down the pyramid shouting loudly. What kind of natural phenomena on the top of the Great Pyramid could produce such an electo-static effect?

It would be interesting to conduct additional physics experiments on the top of the Great Pyramid.

8/3/2013

New Information

http://www.youtube.com/watch?v=hAV4iWhFiSE

https://www.google.com/search?q=google&rlz=1C1GGGE___US530US530&source=lnms&tbm=isch&sa =X&ei=ERb9UYupOMidrAGX7ICYBA&ved=0CAkQ_AUoAQ&biw=1440&bih=775#q=crop+circles&rlz=1C1 GGGE___US530US530&tbs=ic:gray,itp:lineart&tbm=isch&source=lnt&sa=X&ei=Jhb9UbjWCqa6yQHgpIG oDA&ved=0CEEQpwUoBA&bav=on.2,or.r_qf.&bvm=bv.50165853%2Cd.aWc%2Cpv.xjs.s.en_US.seW1cfr vSKg.O&fp=42489b3c3d216d42&biw=1440&bih=775

Adam Trombly