BROUGHTON PLANT HIRE established 1969
BROUGHTON PLANT HIRE & SALES HIRE GUIDE 2016/17 Specialist suppliers to the heating, ventilation and fire protection trades
e: hire@mbroughtonltd.co.uk Southern Depot: 01708 383350 Midlands Depot: 01773 609789 South West Depot: 01275 875587
OFFICIAL SERVICE CENTRE FOR
APPROVED TOOLING DISTRIBUTOR FOR
TRAINING
We can arrange all your training requirements.
ACCREDITATION
1
CONTENTS 02 04 16 25 28 32 34 38 41 43 46
HEALTH & SAFETY
PRESS FITTING PIPE FITTING WELDING ACCESS EQUIPMENT POWERED ACCESS HANDLING & LIFTING DRILLING GRINDING & CUTTING SITE SERVICES ELECTRICAL CABLE CRIMPING & CUTTING
Hire rates charged at a minimum of one week, thereafter on a daily basis. All Plant supplied with relevant safety instructions and test certification. Images used through the this hire guide are for illustration purposes only All hire rates shown in this brochure are exlusive of VAT. Southern Depot : 01708 383350
Midlands Depot : 01773 609789
South West Depot: 01275 875587
HEALTH & SAFETY INFORMATION To help you select the correct Personal Protection please follow the P.P.E. symbol Guide listed below for the relevant Plant items.
Eye Protection
Protective footwear
Protective gloves
Face Shield
Dust Mask
Welding Visor/Welding Goggles
Ear Defenders
Respirator, suitable for welding and/or cutting fumes
Full Body Safety Harness c/w a Lanyard
Safety Helmet
All the above are available from stock, each complying fully with Health & Safety Regulations. All PPE associated products in this brochure are recommended for use and are available as sales items. Please contact our hire desk for more information.
HAND ARM VIBRATION DATABASE
1
GREEN:
NO MORE THAN 8 HOURS CONSTANT USE
2
AMBER:
NO MORE THAN 2 HOURS CONSTANT USE
3
RED:
DOWN TO INDIVIDUAL, USER NEEDS TO DO A RISK ASSESSMENT ON EQUIPMENT BEFORE USE. SHOULD NOT EXCEED 10 - 20 MINS USE
VIBRATION MEASURED IN m2
1
GREEN:
BELOW 5m2
2
AMBER:
ABOVE 5m2 BUT BELOW 10m2
3
RED:
ABOVE 10m2
The hand/harm vibration level information in this brochure, is based on Data supplied by the Relvant manufacturers. Broughton Plant Hire reproduces this data in good faith. For guidance only & not as a substitute for your own risk assessment.
www.broughtonplanthire.co.uk
SALES ITEMS BROUGHTON PLANT HIRE established 1969
Broughton Plant Hire and Sales stock a wide range of consumables, ancillaries and PPE for sale. Please call us to enquire further about our wide range of goods available for next day delivery. • MACHINE SPARES • PPE –PROTECTIVE FOOTWEAR, HI VIS CLOTHING, HARD HATS ETC • WELDING CONSUMABLES • ABRASIVE DISCS • HAND AND POWER TOOL CONSUMABLES • SITE SECURITY E.G. SITE BOXES, FITTING STORES • POWER AND LIGHTING E.G. SITE LIGHTS, TRANSFORMERS ETC • ACCESS EQUIPMENT E.G. LADDERS, PODIUM STEPS ETC
☎ 01708 383 350 Southern Depot : 01708 383350
Midlands Depot : 01773 609789
South West Depot: 01275 875587
PRESS FITTING
When ordering Presstools please specify what Pressfitting System is being used. As not all Jaws & Collars are compatible. If you are unsure please call for advice on: t: 01708 383350 Preparation of Pipe is important. We can supply Pipe Cutters & Deburrers for hire or sale.
All Novopress Tools are calibrated using a 8790 Pressure Tester and Jaws are inspected with a 31465 Optical Laser Test Rig.
5
MAPRESS COPPER
weekly
MAPRESS COPPER KIT 1
15-35mm
£40.00
Novopress EFP202 / ECO202 / ECO2 / EFP2 110v Presstool Inclusive: 15-35mm Jaws
MAPRESS COPPER KIT 2
15-35mm
£40.00
15-35mm
£40.00
42-54mm
£17.50
15-67mm
£75.00
67-108mm
£95.00
15-108mm
£110.00
67-108mm
£120.00
Novopress ACO202 / ACO203 Battery Presstool Inclusive: 15-35mm Jaws
MAPRESS COPPER KIT 3 Novopress ECO301 110v Presstool Inclusive: 15-35mm Jaws
MAPRESS COPPER KIT 4 Novopress 42 + 54mm Adaptor Kit to suit above pressing tools
MAPRESS COPPER KIT 5 Novopress ECO301 110v Presstool Inclusive: 15-67mm Jaws, Collars and Adaptors
MAPRESS COPPER KIT 6 Novopress ECO301 110v Presstool Inclusive: 67-108mm Collars and Adaptors
MAPRESS COPPER KIT 7 Novopress ECO301 110v Presstool Inclusive: 15-108mm Jaws, Collars and Adaptors
MAPRESS COPPER KIT 8
Novopress ACO202XL / ACO203XL Battery Presstool Inclusive: 67-108mm Collars and Adaptors
MAPRESS COPPER KIT 9
15-108mm
£165.00
Novopress ACO202XL / ACO203XL Battery Presstool Inclusive: 15-108mm Jaws, Collars and Adaptors
MINI COPPER KIT
15-35mm
£40.00
Novopress ACO102 Battery Presstool Inclusive: 15-35mm Jaws
Southern Depot : 01708 383350
Midlands Depot : 01773 609789
South West Depot: 01275 875587
6
MAPRESS CARBON STEEL/STAINLESS STEEL MAPRESS STEEL KIT 1
15-35mm
weekly £40.00
Novopress EFP202 / ECO202 / ECO2 / EFP2 110v Presstool Inclusive: 15-35mm Jaws
MAPRESS STEEL KIT 2
15-35mm
£40.00
15-35mm
£40.00
42-54mm
£17.50
67-108mm
£95.00
15-108mm
£110.00
15-67mm
£75.00
76-108mm
£120.00
Novopress ACO202 / ACO203 Battery Presstool Inclusive: 15-35mm Jaws
MAPRESS STEEL KIT 3 Novopress ECO301 110v Presstool Inclusive: 15-35mm Jaws
MAPRESS STEEL KIT 4 Novopress 42 + 54mm Adaptor Kit to suit above pressing tools
MAPRESS STEEL KIT 5 Novopress ECO301 110v Presstool Inclusive: 67-108mm Collars and Adaptors
MAPRESS STEEL KIT 6 Novopress ECO301 110v Presstool Inclusive: 15-108mm Jaws, Collars and Adaptors
MAPRESS STEEL KIT 7 Novopress ECO301 110v Presstool Inclusive: 15-67mm Jaws, Collars and Adaptors
MAPRESS STEEL KIT 8
Novopress ACO202XL / ACO203XL Battery Presstool Inclusive: 76-108mm Collars and Adaptors
MAPRESS STEEL KIT 9
15-108mm
£165.00
Novopress ACO202XL / ACO203XL Battery Presstool Inclusive: 15-108mm Jaws, Collars and Adaptors (not suitable for 66.7mm Gerberit Mapress carbon steel)**
MINI STEEL KIT
15-35mm
Novopress ACO102 Battery Presstool Inclusive: 15-35mm Jaws **For 66.7mm Geberit Mapress Carbon Steel please use Novopress ECO301 Press Tool
www.broughtonplanthire.co.uk
£40.00
7
SPRINKLER SYSTEM MAPRESS SPRINKLER KIT 1
weekly 15-28mm
£40.00
35mm
£29.50
42-54mm
£17.50
76.1mm
£19.50
88.9mm
£19.50
Novopress ECO301 110v Presstool Inclusive: 15-28mm Jaws
MAPRESS SPRINKLER KIT 2 Novopress 35mm HP Collar and Adaptor To suit above pressing tool
MAPRESS SPRINKLER KIT 3 Novopress 42-54mm Collars and Adaptor To suit above pressing tool
MAPRESS SPRINKLER KIT 4 Novopress 76.1mm Collar and Adaptor To suit above pressing tool
MAPRESS SPRINKLER KIT 5 Novopress 88.9mm Collar and Adaptor To suit above pressing tool
MAPRESS SPRINKLER KIT 6
76-108mm
£110.00
HCPS Supersize Presstool Inclusive: 76-108mm Collars and Adaptors
MEPLA MEPLA KIT1
weekly 16-32mm
£40.00
Novopress ACO202 / ACO102 / ACO203 Battery Presstool Inclusive: 16-32mm Jaws, Deburrer and Cutter
MEPLA KIT 2
16-50mm
£57.50
Novopress ACO202 / ACO102 / ACO203 Battery Presstool Inclusive: 16-50mm Jaws, Deburrer and Cutter
MEPLA KIT 3
63mm Jaw Kit
£17.50
75mm Jaw Kit
£17.50
63mm Jaw Kit, Cutter and Deburrer
MEPLA KIT 4 75mm Jaw Kit, Cutter and Deburrer
Southern Depot : 01708 383350
Midlands Depot : 01773 609789
South West Depot: 01275 875587
8
COPPER
weekly
YORKSHIRE COPPER KIT 1
15-35mm
£40.00
Novopress ECO2 / ECO202 / EFP2 / EFP202 110v Presstool Inclusive: 15-35mm Jaws
YORKSHIRE COPPER KIT 2
15-35mm
£40.00
15-35mm
£40.00
42-54mm
£17.50
15-67mm
£75.00
67-108mm
£95.00
15-108mm
£110.00
67-108mm
£120.00
Novopress ACO202 / ACO203 Battery Presstool Inclusive: 15-35mm Jaws
YORKSHIRE COPPER KIT 3 Novopress ECO301 110v Presstool Inclusive: 15-35mm Jaws
YORKSHIRE COPPER KIT 4 Novopress 42 + 54mm Adaptor Kit to suit above pressing tools
YORKSHIRE COPPER KIT 5 Novopress ECO301 110v Presstool Inclusive: 15-67mm Jaws, Collars and Adaptors
YORKSHIRE COPPER KIT 6 Novopress ECO301 110v Presstool Inclusive 67-108mm Collars and Adaptors
YORKSHIRE COPPER KIT 7 Novopress ECO301 110v Presstool Inclusive: 15-108mm Jaws, Collars and Adaptors
YORKSHIRE COPPER KIT 8
Novopress ACO202XL / ACO203XL Battery Presstool Inclusive: 67-108mm Collars and Adaptors
YORKSHIRE COPPER KIT 9
15-108mm
£165.00
Novopress ACO202XL / ACO203XL Battery Presstool Inclusive: 15-108mm Jaws, Collars, Adaptors
MINI COPPER KIT
15-35mm
Novopress ACO102 Battery Presstool Inclusive: 15-35mm Jaws
www.broughtonplanthire.co.uk
£40.00
9
CARBON STEEL/STAINLESS STEEL YORKSHIRE STEEL KIT 1
15-35mm
weekly £40.00
Novopress ECO2 / ECO202 / EFP2 / EFP202 110v Presstool Inclusive: 15-35mm Jaws
YORKSHIRE STEEL KIT 2
15-35mm
£40.00
15-35mm
£40.00
42-54mm
£17.50
15-67mm
£75.00
67-108mm
£95.00
15-108mm
£110.00
67-108mm
£120.00
Novopress ACO202 / ACO203 Battery Presstool Inclusive: 15-35mm Jaws
YORKSHIRE STEEL KIT 3 Novopress ECO301 110v Presstool Inclusive: 15-35mm Jaws
YORKSHIRE STEEL KIT 4 Novopress 42 + 54mm Adaptor Kit to suit above pressing tools
YORKSHIRE STEEL KIT 5 Novopress ECO301 110v Presstool Inclusive: 15-67mm Jaws, Collars and Adaptors
YORKSHIRE STEEL KIT 6 Novopress ECO301 110v Presstool Inclusive 67-108mm Collars and Adaptors
YORKSHIRE STEEL KIT 7 Novopress ECO301 110v Presstool Inclusive: 15-108mm Jaws, Collars and Adaptors
YORKSHIRE STEEL KIT 8
Novopress ACO202XL / ACO203XL Battery Presstool Inclusive: 67-108mm Collars and Adaptors
YORKSHIRE STEEL KIT 9
15-108mm
£165.00
Novopress ACO202XL / ACO203XL Battery Presstool Inclusive: 15-108mm Jaws, Collars and Adaptors
MINI STEEL KIT
15-35mm
£40.00
Novopress ACO102 Battery Presstool Inclusive: 15-35mm Jaws
MULTI LAYER HENCO PVDF/BRASS
weekly
BATTERY / 110v PRESSTOOL
16-32mm
£40.00
BATTERY / 110v PRESSTOOL
16-50mm
£57.50
BATTERY / 110v PRESSTOOL
16-63mm
£75.00
Southern Depot : 01708 383350
Midlands Depot : 01773 609789
South West Depot: 01275 875587
10
COPPER
weekly
SANHA COPPER KIT 1
15-35mm
£40.00
Novopress ECO2 / ECO202 / EFP2 / EFP202 110v Presstool Inclusive: 15-35mm Jaws
SANHA COPPER KIT 2
15-35mm
£40.00
15-35mm
£40.00
42-54mm
£17.50
15-67mm
£75.00
67-108mm
£95.00
15-108mm
£110.00
67-108mm
£120.00
Novopress ACO202 / ACO203 Battery Presstool Inclusive: 15-35mm Jaws
SANHA COPPER KIT 3 Novopress ECO301 110v Presstool Inclusive: 15-35mm Jaws
SANHA COPPER KIT 4 Novopress 42 + 54mm Adaptor Kit to suit above pressing tools
SANHA COPPER KIT 5 Novopress ECO301 110v Presstool Inclusive: 15-67mm Jaws, Collars and Adaptors
SANHA COPPER KIT 6 Novopress ECO301 110v Presstool Inclusive: 67-108mm Collars and Adaptors
SANHA COPPER KIT 7 Novopress ECO301 110v Presstool Inclusive: 15-108mm Jaws, Collars and Adaptors
SANHA COPPER KIT 8
Novopress ACO202XL / ACO203XL Battery Presstool Inclusive: 67-108mm Collars and Adaptors
SANHA COPPER KIT 9
15-108mm
£165.00
Novopress ACO202XL / ACO203XL Battery Presstool Inclusive: 15-108mm Jaws, Collars, Adaptors
MINI COPPER KIT
15-35mm
Novopress ACO102 Battery Presstool Inclusive: 15-35mm Jaws
www.broughtonplanthire.co.uk
£40.00
11
CARBON/STAINLESS/BRONZE SANHA STEEL KIT 1
weekly 15-35mm
£40.00
Novopress ECO2 / ECO202 / EFP2 / EFP202 110v Presstool Inclusive: 15-35mm Jaws
SANHA STEEL KIT 2
15-35mm
£40.00
15-35mm
£40.00
42-54mm
£17.50
15-67mm
£75.00
67-108mm
£95.00
15-108mm
£110.00
67-108mm
£120.00
Novopress ACO202 / ACO203 Battery Presstool Inclusive: 15-35mm Jaws
SANHA STEEL KIT 3 Novopress ECO301 110v Presstool Inclusive: 15-35mm Jaws
SANHA STEEL KIT 4 Novopress 42 + 54mm Adaptor Kit to suit above pressing tools
SANHA STEEL KIT 5 Novopress ECO301 110v Presstool Inclusive: 15-67mm Jaws, Collars and Adaptors
SANHA STEEL KIT 6 Novopress ECO301 110v Presstool Inclusive: 67-108mm Collars and Adaptors
SANHA STEEL KIT 7 Novopress ECO301 110v Presstool Inclusive: 15-108mm Jaws, Collars and Adaptors
SANHA STEEL KIT 8
Novopress ACO202XL / ACO203XL Battery Presstool Inclusive: 67-108mm Collars and Adaptors
SANHA STEEL KIT 9
15-108mm
£165.00
Novopress ACO202XL / ACO203XL Battery Presstool Inclusive: 15-108mm Jaws, Collars and Adaptors
MINI STEEL KIT
15-35mm
£40.00
Novopress ACO102 Battery Presstool Inclusive: 15-35mm Jaws
MULTI LAYER
weekly
BATTERY / 110v PRESSTOOL
16-32mm
£40.00
BATTERY / 110v PRESSTOOL
16-50mm
£57.50
BATTERY / 110v PRESSTOOL
16-63mm
£75.00
Southern Depot : 01708 383350
Midlands Depot : 01773 609789
South West Depot: 01275 875587
12
COPPER/CARBON/STAINLESS VIEGA KIT 1
weekly 15-35mm
£40.00
15-54mm
£57.50
15-67mm
£75.00
Viega Battery Pressgun Inclusive: 15-35mm Press Jaws
VIEGA KIT 2 Viega Battery Pressgun Inclusive: 15-54mm Press Jaws
VIEGA KIT 3
Viega Battery Pressgun Inclusive: 15-67mm Press Jaws, Press Rings and Adaptors
VIEGA KIT 4
67-108mm
£95.00
15-108mm
£110.00
Viega Battery Pressgun Inclusive: 67-108mm Press Rings and Adaptors
VIEGA KIT 5
Viega Battery Pressgun Inclusive: 15-108mm Press Jaws, Press Rings and Adaptors (excluding 64mm Press RIng)
VIEGA PRESS RING
64mm
£9.00
64mm Press Ring
VIEGA MINI KIT
15-35mm
£40.00
15-35mm
£26.50
Viega Battery Pressgun Picco Inclusive: 15-35mm Press Jaws
VIEGA HINGED RING SET FOR MINI KIT Inclusive: 15-35mm Press Ring Set for Hinged Press Jaws
MEGA PRESS MEGA PRESS KIT
weekly 1
/2"-2"
Viega Battery Pressgun Inclusive: 1/2"-2" Press Collars
www.broughtonplanthire.co.uk
£75.00
13
MULTILAYER COMPOSITE PIPE (U PROFILE) WAVIN KIT 1
weekly
16-40mm
£40.00
16-50mm
£57.50
63mm
£17.50
75mm
£22.00
Novopress ACO102 Presstool Inclusive 16-40mm Jaws
WAVIN KIT 2 Novopress ACO202/3 Presstool Inclusive 16-50mm Jaws
WAVIN KIT 3 63mm Jaw
WAVIN KIT 4 75mm Collar and adaptor
MLCP PIPE CUTTER
16-75mm
A full range of Calibration Kits/ Mandrels available
CARBON/STAINLESS/COPPER/GAS B PRESS KIT 1
£8.50 POA
weekly
15-35mm
£40.00
15-35mm
£40.00
Rems Power Press 110v Inclusive: 15-35mm Jaws
B PRESS KIT 2 Rems AKKU Press Battery Inclusive: 15-35mm Jaws
B PRESS KIT 3
42mm
£8.75
54mm
£8.75
67mm
£75.00
15-28mm
£40.00
67-108mm
£95.00
42mm Rems Jaw
B PRESS KIT 4 54mm Rems Jaw
B PRESS KIT 5 Novopress ECO301 110v Presstool Inclusive: Adaptor & 67mm Collar
B PRESS KIT 6 MINI KIT Rems Battery Minipress Inclusive: 15-28mm Jaws
B PRESS KIT 7 Novopress ECO301 110v Presstool Inclusive: 67-108mm Collars and Adaptors
Southern Depot : 01708 383350
Midlands Depot : 01773 609789
South West Depot: 01275 875587
14
POLYPRESS
weekly
REMS AKKU PRESSTOOL
16-32mm
£40.00
REMS AKKU PRESSTOOL PRESS COLLAR KIT
16-50mm 63mm
£57.50 £17.50
PRESS COLLAR KIT
75mm
£17.50
POLYSURE REMS AKKU PRESSTOOL
weekly 15-22mm
£40.00
weekly KLAUKE BATTERY PRESSTOOL KLAUKE BATTERY PRESSTOOL PRESS COLLAR KIT PRESS COLLAR KIT PRESS COLLAR KIT PRESS COLLAR KIT CUTTER & BENDING TOOL SET PIPE BENDING TOOL 110v
16-32mm 16-50mm 63mm 75mm 90mm 110mm 16-110mm 16-32mm
PEX AL PEX (Series F5 ‘U’ Profile / Series F9 ‘TH’ Profile) REMS AKKU PRESSTOOL REMS AKKU PRESSTOOL PRESS COLLAR KIT PRESS COLLAR KIT
16-32mm 16-50mm 63mm 75mm
RAUTOOLS
£57.50 £57.50 £17.50 £17.50 £22.00 £22.00 £22.00 £42.00
weekly £40.00 £57.50 £17.50 £17.50
weekly
A2/A3 BATTERY – HYDRAULIC POWERED COMPRESSION SLEEVE TOOL 16 – 40mm H/G1 HYDRAULIC POWERED COMPRESSION SLEEVE TOOL 40 – 110mm
www.broughtonplanthire.co.uk
£52.00 £110.00
15
PRESS SYSTEM ACCESSORIES (CARBON/STAINLESS)
weekly
MANUAL PIPE BENDER 15-28mm REMS CURVO 110v ELECTRIC BENDER 15-35mm TUBELA ROTARY SCISSOR BENDER 15-54mm (CARBON STEEL) MANUAL PIPE CUTTER 15-54mm MANUAL PIPE CUTTER 76-108mm AXXAIR BENCH MOUNTED PIPE CUTTER 110v UP TO 108mm REMS CENTO PIPE CUTTER 110v 22-108mm (CARBON, STAINLESS OR COPPER CUTTING WHEELS AVAILABLE)
MULTILAYER
£25.00 £50.00 £115.00 £8.50 £12.50 £85.00 £48.00
weekly
REMS SWING BENDING TOOL
14-32mm
£22.00
REMS CURVO 50 BENDING TOOL
32-50mm
£50.00
REMS PYTHON BENDING TOOL
40-63mm
£55.00
MANUAL PIPE CUTTER
16-75mm
£8.50
COPPER
weekly
MANUAL PIPE CUTTER
15-108mm
£12.50
REMS CENTO 110v PIPE CUTTER
22-108mm
£48.00
REMS CURVO 110v ELECTRIC BENDER
15-35mm
£50.00
RATCHET COPPER BENDER
15-54mm
£95.00
Southern Depot : 01708 383350
Midlands Depot : 01773 609789
South West Depot: 01275 875587
16
PIPE FITTING EQUIPMENT
16
for more information visit www.broughtonplanthire.co.uk www.broughtonplanthire.co.uk
telephone: 01708 383350
17
PIPE THREADING MACHINES
weekly
RIDGID 300C THREADING MACHINE 1⁄2"-2" BSP C/W PIPE SUPPORT
£40.00
RIDGID 1233 THREADING MACHINE
£62.00
1⁄
"-3" BSP C/W PIPE SUPPORT
2
RIDGID 1233 THREADING MACHINE ⁄2"-2" BSP C/W 2 DIE HEADS & PIPE SUPPORT 1
ADDITIONAL DIE HEAD RIDGID
£52.50 £6.00
REX THREADING MACHINE 1⁄2"-4" BSP C/W PIPE SUPPORT
£95.00
RIDGID 1233C THREADING MACHINE 1⁄2"-3" NPT C/W PIPE SUPPORT
£95.00
REX THREADING MACHINE 1⁄2"-4" NPT C/W PIPE SUPPORT
£105.00
MACHINE GUARDS
£6.00
46 PIPE SUPPORT
£8.00
965/RJ98 PIPE SUPPORT/PIPE ROLLER 4"-12"
£8.00
DRIP TRAY (FOR USE UNDER MACHINES TO PROTECT FLOORS ETC)
£5.00
NIPPLE CHUCK
£12.50
141 RECEDER 2 ⁄2"-4"
£30.00
161 RECEDER 4"-6"
£40.00
1
HAND HELD THREADING MACHINES
weekly
RIDGID 690 1⁄2"-2" 110v
£32.00
REMS AMIGO 2
£32.00
1
⁄2"-2" 110v
REMS AMIGO 16-32mm CONDUIT
£32.00
R200 RATCHET HAND DIES UPTO 2"
£20.00
PIPE STILSONS & CHAIN WRENCHES
weekly
14"/24"
£6.00
36"
£7.00
48"
£8.50
Southern Depot : 01708 383350
Midlands Depot : 01773 609789
South West Depot: 01275 875587
18
ROLL GROOVING EQUIPMENT
weekly
RIDGID 918 HYDRAULIC GROOVER SUPPLIED 2"-6"
£40.00
RIDGID 918 HYDRAULIC GROOVER SUPPLIED 8"-12"
£40.00
RIDGID 918 STABILIZER KIT
£11.50
RIDGID 916 PORTABLE ROLL GROOVER 1 "-6"
£30.00
RIDGID 916 PORTABLE ROLL GROOVER 1" ONLY
£40.00
RIDGID 916 PORTABLE ROLL GROOVER 2"- 6" COPPER
£40.00
RIDGID 915/914 PORTABLE ROLL GROOVER 2"- 6"
£40.00
RIDGID 975 COMBO INSITU ROLL GROOVER 1 ⁄4" – 6"
£40.00
RIDGID 915 INSITU PORTABLE ROLL GROOVER ROLLERS 11⁄4"- 11⁄2"
£40.00
RIDGID 918 GROOVER, POWER DRIVE & PIPE SUPPORT
£62.00
RIDGID HC450 HOLE CUTTER FOR MECHANICAL TEES
£62.00
1⁄ 4
1
ROLL GROOVING EQUIPMENT
weekly
VICTAULIC 272SFS ROLL GROOVING M/C 2"-8"*
£88.00
ABOVE SUPPLIED WITH 300C POWER DRIVE AND TRISTAND
£110.00
VICTAULIC VE416 FSD 2"-12" OGS PIPE
£265.00
VICTAULIC VE416 FSD 14"-16" AGS PIPE
£265.00
RX ROLLER SET S/STEEL SCH 10 AND BELOW ⁄4"- 12"
£38.00
RX ROLLER SET CARBON SCH 10 AND BELOW 3⁄4"- 12"
£38.00
COPPER ROLLER SET FOR BRITISH STANDARD COPPER 2"-8"
£38.00
AGS ROLLER SET 14"-16" FOR USE ON VE416 FSD
£88.00
3
*VE272SFS permitted for roll grooving thin wall carbon steel pipe 2"-12"
www.broughtonplanthire.co.uk
19
PRESSURE/PIPE TESTING (*Calibrated gauges available as sale items)
weekly
3.5 CFM COMPRESSOR 115 psi C/W HOSE & 1⁄2" BSP BUSH
£27.50
7.5 CFM COMPRESSOR 115 psi C/W HOSE & ⁄2" BSP BUSH
£35.00
8 CFM COMPRESSOR 130 psi C/W HOSE & ⁄2" BSP BUSH
£38.00
ELECTRIC WATER TEST PUMP MAX. 50 BAR
£40.00
PETROL WATER TEST PUMP MAX. 50 BAR
£50.00
RIDGID HAND TEST BUCKET MAX. 60 BAR
£18.50
REMS MULTI-PUSH FLUSHING AND PRESSURE TESTER
£85.00
1
1
DRAIN TESTING
weekly
DRAIN BUNGS 1"-6"
£2.00
RUBBER DRAIN TEST BAGS 2"-6"
£4.00 POA
TEST KIT SALE ITEM ONLY
GAS PURGING
weekly
NITROGEN REGULATOR HOSE & 1⁄2" BSP CONNECTION NITROGEN CYLINDER 30 LITRE
Southern Depot : 01708 383350
£16.00 £6.50
Midlands Depot : 01773 609789
South West Depot: 01275 875587
20
POWERED PIPE CUTTERS
weekly
RIDGID 590L 14" DRY CUT SAW
£40.00
RIDGID 550 RECIPROCATING SAW 1⁄2"-6"
£30.00
FEIN RECIPROCATING PIPE SAW 100-325MM COMPLETE WITH CLAMP
£75.00
RIDGID 258 HYDRAULIC/POWERED PIPE CUTTER 21⁄2"-8"
£58.00
RIDGID 258XL HYDRAULIC/POWERED PIPE CUTTER 8"-12"
£58.00
REMS DUE CENTO 2"-8"
£58.00
MANUAL PIPE CUTTERS
weekly
RIDGID 2A PIPE ROLLER CUTTER 1⁄2"-2"
£6.50
RIDGID 4S PIPE ROLLER CUTTER 2 ⁄2"-4"
£12.50
RIDGID 6S PIPE ROLLER CUTTER 4"-6"
£15.00
RIDGID 466 HINGED FOUR WHEEL CUTTERS 4"-6"
£40.00
RIDGID 468 HINGED FOUR WHEEL CUTTERS 6"-8"
£45.00
RIDGID 472 (868) HINGED FOUR WHEEL CUTTERS 8"-12"
£48.00
1
RIDGID 154 4" COPPER CUTTERS
£9.50
RIDGID 156 6" COPPER CUTTERS
£15.50
RIDGID STUD CUTTER 8mm
£12.00
RIDGID STUD CUTTER 10mm
£12.00
ORBITAL CUTTERS
weekly
SCORP CUTTER 1"-8" 110v SQUARE CUT
£62.50
SCORP CUTTER 8"-14" 110v SQUARE CUT
£85.00
GF CUT AND BEVEL MACHINE RA4 ⁄2"-4" C/W BENCH
£90.00
GF CUT AND BEVEL MACHINE RA6 2"-6" C/W BENCH
£120.00
1
1
AXXAIR CUTTER 4" C/W BENCH ⁄4”-4 ⁄2”
£90.00
AXXAIR CUTTER 6" C/W BENCH ⁄4”-6”
£120.00
AXXAIR CUTTER 8" C/W BENCH 2”-8”
£150.00
1 1
www.broughtonplanthire.co.uk
21
PIPE BENDING
weekly
HYDRAULIC 1⁄2"-2"
£48.00
HYDRAULIC ⁄2"-3"
£60.00
1
RIDGID 3813C ⁄2"- 3" ELECTRIC 110v BENDER
£105.00
TUBELA ROTARY SCISSOR BENDER 15-54mm CARBON STEEL / COPPER
£115.00
1
TUBELA 15-54mm RATCHET ASSISTED COPPER BENDER
£85.00
HILMOR 15-35mm STAND BENDER
£28.00
HILMOR 15-42mm STAND BENDER
£32.00
HILMOR 16-25mm CONDUIT BENDER
£18.00
HILMOR 15-22mm SCISSOR BENDER
£10.00
REMS CURVO 15-28mm 110v BENDER
£50.00
REMS CURVO 50 110v 14-50mm / MULTI-LAYER COMPOSITE PIPE
£50.00
REMS PYTHON HYDRAULIC 40-63mm / MULTI-LAYER COMPOSITE PIPE
£58.00
BENCHES/VICES
weekly
RIDGID 1400 WORK BENCH C/W CHAIN VICE (4" OR 6") & ENGINEERS VICE
£12.50
RIDGID 560 HORSE BENCH 5" CAPACITY
£7.50
RIDGID 450 TRIPOD VICE 5" CAPACITY
£9.00
RIDGID 460 TRIPOD VICE 6" CAPACITY
£9.00
WELDING CLAMPS/VICES
£12.00
ROLLING WORK BENCH C/W CHAIN VICE & ENG VICE
£27.50
PIPE FREEZERS
weekly
FREEZE MASTER ELECTRIC 110v
15mm-42mm
£48.00
FREEZE MASTER ELECTRIC 110v
15mm-60mm
£64.00
EXPANSION KIT
65mm-88mm
£16.00
REMS ESKIMO CO2 KIT 1⁄8"-2"
10-60mm
£42.00
CO2 GAS
Southern Depot : 01708 383350
POA
Midlands Depot : 01773 609789
South West Depot: 01275 875587
22
COPPER TOOLS
weekly
T60 110v T DRILL 15-54mm
£110.00
MANUAL T DRILL FOR COPPER 15-42mm
CAST IRON TOOLS
£40.00
weekly
RECORD 45 CUTTER UP TO 6"
£34.00
RECORD 45 CUTTER UP TO 12"
£38.00
246 SNAP CUTTER UP TO 6"
£36.00
4" PULLING TOOL
£30.00
6" PULLING TOOL
£36.00
8" PULLING TOOL
£50.00
RIDGID 228 PIPE ASSEMBLY TOOL 2"-8"
£38.00
www.broughtonplanthire.co.uk
23
HDPE JOINTING
weekly
BUTT WELDING MACHINE
40-200mm
£135.00
BUTT WELDING MACHINE
40-315mm
£255.00
BUTT WELDING HAND HELD MACHINE (HOT PLATE) 40-75mm
£40.00
ELECTROFUSION BOX 110v
40-160mm
£60.00
ELECTROFUSION BOX 110v
40-315mm
£68.00
FUZE HDPE
weekly
REMS BUTT WELDING MACHINE
40-160mm
£135.00
REMS BUTT WELDING MACHINE
90-315mm
£255.00
BUTT WELDING HAND HELD MACHINE (Hot Plate) 40-75mm
£40.00
ELECTROFUSION BOX 110v
40-315mm
£68.00
PE80 FUSION WELDER 40v
16-800mm
£68.00
HPPE (PE100) MDPE FUSION WELDER 40v
32-315mm
£60.00
HPPE (PE100) MDPE FUSION WELDER 80v
315-800mm
£75.00
SOCKET FUSION
weekly
BENCH MACHINE PACK
50-125mm
£155.00
1400w HAND-HELD MACHINE
40-125mm
£55.00
800w HAND-HELD MACHINE
20-63mm
£40.00
JIG KIT FOR INSITU SOCKET FUSION
20-125mm
£125.00
AQUATHERM ELECTROFUSION MACHINE
20-160mm
£68.00
AQUATHERM ELECTROFUSION MACHINE
20-250mm
£85.00
Also includes 1400w Hand-held machine
* Generators for fusion machines available on Page 44
Southern Depot : 01708 383350
Midlands Depot : 01773 609789
South West Depot: 01275 875587
24
ELECTROFUSION
weekly
(Now available as data logging)
MDPE FUSION WELDER 40v
£60.00
MDPE FUSION WELDER 80v
£75.00
HPPE (PE100) FUSION WELDER 40v 32-315mm
£60.00
HPPE (PE100) FUSION WELDER 80v 315-800mm
£75.00
BARCODE READER FOR USE WITH MDPE MACHINE
£25.00
HDPE FUSION WELDER AW315 110v 40-315mm (SUITABLE FOR GEBERIT, TERRAIN, AKATHERM)
£68.00
ENFUSION VULCATHENE (FOR CHEMICAL WASTE) UPTO 6"
£68.00
GF PIPING SYSTEMS INSTAFLEX HWSG3 16-225mm
£85.00
ACCESSORIES
weekly
TOP LOADING CLAMP
£12.00
FUSION CLAMP TEE
£25.00
SQUEEZE OFF TOOL MANUAL
20-63mm
£14.00
SQUEEZE OFF TOOL HYDRAULIC
63-180mm
£40.00
RITMO PS180 PEELING TOOL
63-180mm
£47.50
RITMO PS400 PEELING TOOL
110-400mm
£47.50
FRIATEC PEELING TOOL
90-400mm
£47.50
UNIPREP 1 ROTARY SCRAPPING TOOL
110-400mm
£47.50
UNIPREP 2 ROTARY SCRAPPING TOOL
125-500mm
£65.00
PROTECTA-LINE STRIPPING TOOL
90-110mm
£47.50
PROTECTA-LINE STRIPPING TOOL
125-180mm
£47.50
TIN-12 GENERATOR TO SUIT FUSION MACHINE
www.broughtonplanthire.co.uk
£60.00
25
WELDING
Southern Depot : 01708 383350
Midlands Depot : 01773 609789
South West Depot: 01275 875587
26
WELDERS
(All sets supplied with 2 x 15m Welding Leads. 415 Welders supplied with 415v 32amp 5 Pin Plugs)
150amp D.C. INVERTER DUAL VOLTAGE 110v 32amp OR 240v 16amp 200amp MULTI VOLTAGE (110v/240v/415v) MILLER DC INVERTER 250amp D.C. INVERTER 240v/415v 32amp 270amp D.C. INVERTER 415v 32amp 400amp D.C. INVERTER 415v 32amp INVERTER REMOTE CONTROL 415v TIG SET 110v/240v TIG SET
WELDER GENERATORS
(All sets supplied with 2 x 15m Welding Leads)
PETROL MOSA DC 150amp Hand Carry PETROL MOSA DC 200amp DIESEL MOSA DC 200amp DIESEL MOSA DC 250amp DIESEL MOSA DC 300amp DIESEL MOSA DC 350amp REMOTE CONTROL
WELDER ACCESSORIES
weekly £45.00 £65.00 £65.00 £65.00 £65.00 £12.00 £90.00 £65.00
weekly £70.00 £82.00 £85.00 £95.00 £105.00 £115.00 £12.00
weekly
15m WELDING LEADS 415v 5-PIN EXT LEADS WELDING SCREEN 2m X 2m ELEPHANT TENT WELDING SHELTER PIPE ROLLER STANDS UP TO 10" ADJUSTABLE PIPE STAND UP TO 16" FUME EXTRACTOR C/W 5M FLEXI DUCT FUME ELIMINATOR FILTRATION EXTRACT LINCOLN MOBIFLEX FILTRATION FUME EXTRACTOR / 735 CFM AIRFLOW FIRE EXTINGUISHERS, CO2 WATER, DRY POWDER ROD QUIVER WELDING CLAMP BARREL PUMP JERRY CAN 205L DIESEL DRUM BARREL BUND
www.broughtonplanthire.co.uk
£5.50 £12.00 £8.00 £26.00 £8.00 £36.00 £32.00 £42.00 £80.00 £7.50 £8.00 £8.00 £3.00 £2.50 POA £12.00
27
PROPANE EQUIPMENT
weekly
PROPANE TORCH KIT & CYLINDER
£8.00
PROPANE TORCH
£5.50
LEAD MELTING POT LADLE & FURNACE
£36.00
OXY/PROPANE CUTTING & HEATING KIT
£36.00
OXY/ACETYLENE EQUIPMENT
weekly
LEAD BURNING KIT
£33.00
CUT & WELD KIT
£33.00
OXY/PROPANE CUTTING & HEATING KIT
£36.00
PORTA PACK CYLINDER TROLLEY CYLINDER SIZE X + M
£5.50
MID SIZE CYLINDER TROLLEY CYLINDER SIZE Y + J
£5.50
FULL SIZE CYLINDER TROLLEY CYLINDER SIZE W + F
£5.50
CYLINDER HIRE
weekly
OXYGEN 10ltr
£6.50
OXYGEN 30ltr
£6.50
ACETYLENE 10ltr
£6.50
ACETYLENE 30ltr
£6.50
ARGON 30ltr
£6.50
NITROGEN 30ltr
£6.50
CO2 VAPOUR 10ltr
£4.50
CO2 LIQUID FREEZE 10ltr
£4.50
PROPANE 3.9kg
£4.50
PROPANE 18kg
£6.50
*All Gas contents for the above cylinders POA
Southern Depot : 01708 383350
Midlands Depot : 01773 609789
South West Depot: 01275 875587
28
ACCESS EQUIPMENT
www.broughtonplanthire.co.uk
29
MOBILE TOWERS
(All available with 500mm & 250mm Rung Centres in 3T and AGR) (All available in the following base sizes: 1450x2.5m 1450x1.8m 850x2.5m 850x1.8m)
weekly
PLATFORM HEIGHT
1.7m
WORKING HEIGHT
3.7m
OVERALL HEIGHT 2.530m
£25.00
PLATFORM HEIGHT
2.2m
WORKING HEIGHT
4.2m
OVERALL HEIGHT 3.030m
£25.00
PLATFORM HEIGHT
2.7m
WORKING HEIGHT
4.7m
OVERALL HEIGHT 3.680m
£28.00
PLATFORM HEIGHT
3.2m
WORKING HEIGHT
5.2m
OVERALL HEIGHT 4.180m
£29.00
PLATFORM HEIGHT
3.7m
WORKING HEIGHT
5.7m
OVERALL HEIGHT 4.530m
£36.00
PLATFORM HEIGHT
4.2m
WORKING HEIGHT
6.2m
OVERALL HEIGHT 5.030m
£42.00
PLATFORM HEIGHT
5.2m
WORKING HEIGHT
7.2m
OVERALL HEIGHT 6.180m
£58.00
PLATFORM HEIGHT
6.2m
WORKING HEIGHT
8.2m
OVERALL HEIGHT 7.030m
£70.00
PLATFORM HEIGHT
6.7m
WORKING HEIGHT
8.7m
OVERALL HEIGHT 7.680m
£75.00
PLATFORM HEIGHT
7.2m
WORKING HEIGHT
9.2m
OVERALL HEIGHT 8.180m
£80.00
PLATFORM HEIGHT
7.7m
WORKING HEIGHT
9.7m
OVERALL HEIGHT 8.530m
£85.00
PLATFORM HEIGHT
8.2m
WORKING HEIGHT
10.2m OVERALL HEIGHT 9.030m
£90.00
PLATFORM HEIGHT
8.7m
WORKING HEIGHT
10.7m OVERALL HEIGHT 9.680m
£95.00
PLATFORM HEIGHT
9.2m
WORKING HEIGHT
11.2m OVERALL HEIGHT 10.180m
£100.00
PLATFORM HEIGHT
9.7m
WORKING HEIGHT
11.7m OVERALL HEIGHT 10.530m
£105.00
PLATFORM HEIGHT
10.2m
WORKING HEIGHT
12.2m OVERALL HEIGHT 11.030m
£110.00
PLATFORM HEIGHT
10.7m
WORKING HEIGHT
12.7m OVERALL HEIGHT 11.680m
£120.00
PLATFORM HEIGHT
11.2m
WORKING HEIGHT
13.2m OVERALL HEIGHT 12.180m
£130.00
PLATFORM HEIGHT
11.7m
WORKING HEIGHT
13.7m OVERALL HEIGHT 12.530m
£140.00
PLATFORM HEIGHT
12.2m
WORKING HEIGHT
14.2m OVERALL HEIGHT 13.030m
£150.00
CANTILEVER TOWERS
weekly
VARIOUS SIZES AVAILABLE
POA
STAIRDECK-STAIRWAY TOWER
(Base Size 700x1500mm)
weekly
PLATFORM HEIGHT
2.8m
£65.00
PLATFORM HEIGHT
4.3m
£85.00
Southern Depot : 01708 383350
Midlands Depot : 01773 609789
South West Depot: 01275 875587
30
DEALING DESK TOWERS (Allows Access over desks, Machinery etc.)
weekly
2.2m PLATFORM HEIGHT
850mm WIDE X 3.6m LONG
£52.00
2.2m PLATFORM HEIGHT
850mm WIDE X 2.5m LONG
£45.00
2.2m PLATFORM HEIGHT
850mm WIDE X 1.8m LONG
£45.00
MONKEY TOWER MINI (Desk surfer)
weekly
WORKING HEIGHT UPTO 3.9m
£90.00
FOLDEASY TOWER
weekly
0.8m X 1.8m
PLATFORM HEIGHT
1.5m
£25.00
0.8m X 1.8m
PLATFORM HEIGHT
2.2m
£25.00
PODIUM STEPS (Standard or PAS 250 complient)
weekly
PD500
PLATFORM HEIGHT
0.5m
£16.00
PD5
PLATFORM HEIGHT
0.9m
£16.00
PD
PLATFORM HEIGHT
1.165m
£18.00
PD2
PLATFORM HEIGHT
1.5m
£20.00
PD3
PLATFORM HEIGHT
1.8m
£22.00
SHERPASCOPIC HEIGHT ADJUSTABLE PLATFORM STEPS
weekly
4-6 Tread
1.06-1.52m PLATFORM ADJUSTABLE
£20.00
7-9 Tread
1.77-2.23m PLATFORM ADJUSTABLE
£24.00
6 Tread
1.52m PLATFORM FIXED
£20.00
BUILDERS STEPS
weekly
Class 1 aluminium
8 tread
OPEN HEIGHT
1.95m
£6.50
Class 1 aluminium
10 tread
OPEN HEIGHT
2.44m
£8.00
Class 1 aluminium
12 tread
OPEN HEIGHT
2.93m
£10.00
Class 1 fibreglass
6 tread
OPEN HEIGHT
1.65m
£11.50
Class 1 fibreglass
8 tread
OPEN HEIGHT
2.20m
£12.80
Class 1 fibreglass
10 tread
OPEN HEIGHT
2.74m
£14.00
www.broughtonplanthire.co.uk
31
PLATFORM STEPS
(Complete with two handrails)
weekly
5 Tread
1.3m PLATFORM
£10.00
6 Tread
1.56m PLATFORM
£12.00
8 Tread
2.08m PLATFORM
£14.00
10 Tread
2.59m PLATFORM
£16.00
COMBINATION LADDER
(Use as extended steps or extension ladder)
weekly
2.1m
CLOSED HEIGHT
Extended Steps max 3.5m
£16.00
2.7m
CLOSED HEIGHT
Extended Steps max 4.2m
£18.00
3m
CLOSED HEIGHT
Extended Steps max 4.8m
£19.50
3.5m
CLOSED HEIGHT
Extended Steps max 5.6m
£21.00
EXTENSION LADDERS
weekly
2.3m Double
EXTENDED HEIGHT
4m
£14.00
2.3m Treble
EXTENDED HEIGHT
5.8m
£16.00
3m Double
EXTENDED HEIGHT
5.4m
£14.00
3m Treble
EXTENDED HEIGHT
7.3m
£20.00
3.5m Double
EXTENDED HEIGHT
6.2m
£16.00
3.5m Treble
EXTENDED HEIGHT
8.5m
£26.00
4m Treble
EXTENDED HEIGHT
10.3m
£34.00
ROOF LADDER
£12.00
LIGHTWEIGHT STAGING “YOUNGMAN BOARD"
weekly
10’
3m
£6.00
12’
3m
£7.00
14’
4.5m
£8.00
16’
5m
£10.00
18’
5.4m
£13.00
20’
6.3m
£15.00
Guard Rail System per 3m
Southern Depot : 01708 383350
£10.00
Midlands Depot : 01773 609789
South West Depot: 01275 875587
32
POWERED ACCESS
www.broughtonplanthire.co.uk
33
PUSH AROUND VERTICAL (PAV)
weekly
MODEL
MAX PLATFORM MAX WORKING WEIGHT KG
Pop Up
1.63m
3.63m
280
£70.00
Pop Up Push 8 Pro
2.5m
4.5m
370
£95.00
Youngman X3
2.5m
4.5m
349
£95.00
Youngman X3X
3.2m
5,2m
390
£110.00
Power Tower Nano
2.5m
4.5m
285
£95.00
Power Tower Power Tower
3.1m
5.1m
342
£110.00
Genie AWP 25
7.56m
9.56m
263
£165.00
Peco lift
1.5m
3.5m
180
£75.00
Eco lift
2.2m
4.2m
305
£95.00
SELF PROPELLED
weekly
MODEL
MAX PLATFORM MAX WORKING WEIGHT KG
Power Tower Nano SP
2.5m
4.5m
478
£210.00
Genie GS1932
5.79m
7.79m
1,498
£165.00
Snorkel S1930
5.6m
7.6m
1,650
£165.00
Genie GS2032
6.10m
7.90m
1,825
£190.00
Genie GS2632
7.92m
9.92m
2,002
£295.00
Genie GS2646
7.92m
9.92m
2,447
£325.00
Genie GR15
4.47m
6.47m
994
£165.00
Genie GR20
6.02m
8.02m
1,112
£210.00
ACCESSORIES
weekly
FULL BODY C/W RESTRAINT LANYARD
£15.00
POWER TOWER PIPE CARRIER
£12.50
GENIE 1932, 2632, 2646 PIPE CARRIER
£24.00
Southern Depot : 01708 383350
Midlands Depot : 01773 609789
South West Depot: 01275 875587
34
HANDLING & LIFTING
www.broughtonplanthire.co.uk
35
GENIE LIFTS
weekly
GL10 3.56m MAX LIFT SWL 159kg SUMNER CONTRACTOR LIFT 24/12 - 3.7m MAX LIFT SWL 180kg SL10 3m MAX LIFT SWL 450kg SL12 3m MAX LIFT SWL 295kg SL15 5m MAX LIFT SWL 360kg SL18 5.4m MAX LIFT SWL 295kg SL20 6m MAX LIFT SWL 363kg SL24 7.3m MAX LIFT SWL 290kg SL25 7.9m MAX LIFT SWL 295kg GENIE FORK EXTENSIONS PER PAIR (N.B. Will decrease load capacity) PIPE CRADLES PER PAIR
£80.00 £80.00 £85.00 £85.00 £95.00 £95.00 £115.00 £125.00 £125.00 £12.00 £12.00
PORTABLE TELESCOPIC GAS HOIST
weekly
GH38 3.8m MAX LIFT SWL 136Kg GH56 5.6m MAX LIFT SWL 113Kg CO2 10ltr vapour cylinder Contents for 10ltr CO2 vapour cylinder
£105.00 £125.00 £4.50 POA
ROUST-A-BOUT
weekly
R150 4.6m MAX LIFT SWL 680kg R250 7.6m MAX LIFT SWL 680kg EXTENSION TEE & HEAD
£105.00 £175.00 £32.00
SHEER LEGS (Extendable)
weekly
SWL 1 Ton
£115.00
MAN RIDING TRIPOD Portable Retrival System for Personnel Working below ground TRIPOD C/W WINCH & HARNESS MAN SAFE SAFETY HARNESS RESTRAINT FOR ROOF
Southern Depot : 01708 383350
Midlands Depot : 01773 609789
weekly £175.00 £195.00
South West Depot: 01275 875587
36
CHAIN BLOCKS
weekly
⁄2 TON UP TO 6m LIFT
£30.00
1
⁄2 TON UP TO 30m LIFT
£45.00
1 TON UP TO 6m LIFT
£30.00
1 TON UP TO 30m LIFT
£45.00
2 TON UP TO 10m LIFT
£45.00
1
⁄4 / 11⁄2 TON PULL LIFT/LEVER HOIST
£25.00
3
⁄2 / 1 TON ELECTRIC HOIST UP TO 30m LIFT 110v 32amp
£95.00
1
⁄2 / 1 TON ELECTRIC HOIST UP TO 50m LIFT 110v 32amp
£120.00
2 TON ELECTRIC HOIST UP TO 30m LIFT 110v 32amp
£125.00
1
PORTABLE HANDLING
weekly
PALLET TRUCKS 2 TON STANDARD
£28.50
PALLET TRUCK EXTENDED FORK 2 TON
£48.00
PALLET TRUCK HIGH LIFT 1 TON
£64.00
FLOOR CRANE 1000 KILO
£54.00
COUNTER BALANCE FLOOR CRANE 500kg
£105.00
NYLON MACHINE SKATES (PER 3)
£54.00
PIPE BOGEY
£12.50
CRICKET PIPE BOGEY
£16.50
FLAT BED TROLLEY (VARIOUS SIZES AVAILABLE)
£22.00
SACK BARROW
£8.50
SKOOT HYDRAULIC SACK BARROW 2 TON (PAIR G STRAP) STAIR CLIMBING SACK BARROW
£120.00 £12.50
BATTERY POWERED STAIR CLIMBER 330kg
£135.00
BATTERY POWERED STAIR CLIMBER 310kg
£130.00
BATTERY POWERED STAIR CLIMBER 190kg
£125.00
MANHOLE LIFT CRADLE
£95.00
SMALL PLASTERBOARD TROLLEY
£16.50
LARGE PLASTERBOARD TROLLEY
£22.50
DRY WALL PANEL LIFTER
£45.00
www.broughtonplanthire.co.uk
37
HANDLING & LIFTING ACCESSORIES
weekly
FLAT / WEBBED SLINGS (ALL SIZES)
£6.00
GIRDER TROLLEY / CLAMP (ADJUSTABLE)
£12.00
D SHACKLES
£3.50
ROLLING CROW BAR
£12.00
RATCHET CABLE JACKS 16TON
£105.00
CABLE JACKS 3 TON/ 6 TON
£52.00
CABLE ROLLERS
£6.00
NYLON MACHINE SKATES (PER 3)
£54.00
HYDRAULIC JACKS (5 TON)
£32.00
HYDRAULIC JACKS (10 TON)
£49.00
SAFETY HARNESS FULL BODY (VARIOUS LANYARD OPTIONS AVAILABLE)
£15.00
INERTIA REEL UP TO 10m
£35.00
INERTIA REEL UP TO 20m
£40.00
ROOF MAN ANCHOR
£85.00
A FRAME GANTRY (6’6" to 10’ Adjustable underside of Beam)
weekly
A. FRAME (1 & 2 TON CAPACITY)
1.5m BEAM
£95.00
A. FRAME (1 & 2 TON CAPACITY)
2.0m BEAM
£110.00
A.FRAME (1 & 2 TON CAPACITY)
3.0m BEAM
£125.00
A. FRAME (1 & 2 TON CAPACITY)
4.0m BEAM
£140.00
WINCH
weekly
TIRFOR WINCH C/W 30m WIRE ROPE (800kg OR 1600kg)
£40.00
MINIFOR 110v C/W 50m WIRE ROPE (300kg SWL) TR30 (WT 21KG)
£145.00
MINIFOR 110v C/W 50M WIRE ROPE (500kg SWL) TR50 (WT 32kg)
£165.00
Southern Depot : 01708 383350
Midlands Depot : 01773 609789
South West Depot: 01275 875587
38
DRILLING
www.broughtonplanthire.co.uk
39
HILTI RANGE
weekly
TE2 110v ROTARY HAMMER DRILL SDS 12mm Concrete 16 m/s2
£16.00
TE7 110v ROTARY HAMMER DRILL SDS max 12mm Concrete 11ms2
£20.00
TE4A CORDLESS ROTARY HAMMER DRILL SDS 22v 12mm Concrete 11m/s2
£28.00
TE6A CORDLESS ROTARY HAMMER DRILL SDS 36v 16mm Concrete 11m/s2 SFH22A CORDLESS HAMMER DRILL DRIVER 22v 14mm Concrete NB only gives steel HAV rating at 2.5m/s2 TE60ATC 110v BREAKER SDS 40mm Concrete 11 m/s2 SIW14 IMPACT WRENCH CORDLESS 18v Up to 10mm max SIW22A IMPACT WRENCH CORDLESS 22v Up to 10mm max SID14 IMPACT DRIVER CORDLESS 18v Up to 10mm max SID22A IMPACT DRIVER CORDLESS 22v Up to 10mm max TEDRS6 DUST REMOVAL SYSTEM TO SUIT TE7 AND TE6A
£30.00
HAMMER DRILLS 110v
£20.00 £65.00 £28.00 £28.00 £18.00 £20.00 £12.50
weekly
GBH 2 SDS HAMMER DRILL 20mm CONCRETE 16 m/s2
£14.00
GBH 3 SDS HAMMER DRILL 28mm CONCRETE 13m/s2
£18.00
GBH 4 SDS HAMMER DRILL 32mm CONCRETE 12m/s2
£24.00
GBH 5 SDS MAX COMBI HAMMER 40mm CONCRETE 12.8 m/s2
ROTARY DRILLS
weekly
13mm PERCUSSION DRILL 15 m/s2
£14.00
10mm CHUCK ANGLE DRILL
£16.00
13mm CHUCK ANGLE DRILL
£18.00
ROTARY DRILL AND PEDESTAL STAND
£32.00
ROTOBROACH
weekly
PUMA 30mm DIA 25MM DEPTH
£50.00
PANTHER 40mm DIA 50mm DEPTH
£60.00
COBRA 65mm DIA 50mm DEPTH
£70.00
Southern Depot : 01708 383350
Midlands Depot : 01773 609789
South West Depot: 01275 875587
40
DRY DIAMOND CORE DRILLING VAR. SPEED DRILL 8406 13mm CHUCK
CORE DRILLS
weekly £24.00
weekly
ALL SIZES AVAILABLE (SALE ONLY)
CONCRETE BREAKING
POA
weekly
LIGHT DUTY BREAKER SDS MAX
£30.00
MEDIUM DUTY BREAKER 950
£34.00
HEAVY DUTY BREAKER
£42.00
POINTS/CHISELS
£2.50
IMPACT WRENCH
weekly
110v 1⁄2" SQ DRIVE 12 - 32mm
£20.00
110v 3⁄4" SQ DRIVE 12 - 36mm
£22.00
IMPACT SOCKETS AVAILABLE
POA
CORDLESS DRILLING & FIXING
weekly
14/18v 13MM CHUCK COMBI DRILL
£18.00
18v 10mm CHUCK ANGLE DRILL
£18.00
18v IMPACT DRIVER
£16.00
18v IMPACT WRENCH ⁄2" SQ DRIVE
£18.00
24v CORDLESS HAMMER DRILL SDS PLUS
£24.00
36v CORDLESS HAMMER DRILL SDS PLUS
£26.00
1
www.broughtonplanthire.co.uk
GRINDING & CUTTING
Southern Depot : 01708 383350
Midlands Depot : 01773 609789
41
South West Depot: 01275 875587
42
GRINDING & CUTTING
weekly
4" & 41⁄2" MINI GRINDER
£8.50
41⁄2" 18v CORDLESS GRINDER
£18.00
5" ANGLE GRINDER
£15.00
7" ANGLE GRINDER
£15.00
9" ANGLE GRINDER
£15.00
12" PETROL SAW
£40.00
JIGSAW
£16.00
18v CORDLESS JIGSAW
£24.00
FEIN RECIPROCATING PIPE SAW 100-325MM COMPLETE WITH CLAMP
£75.00
RECIPROCATING SHARK SAW
£22.00
18v CORDLESS SHARK SAW
£24.00
14" 2414 CHOP SAW
£20.00
BAND SAW MA615
£105.00
CROSS CUT MITRE SAW
£48.00
270mm CIRCULAR SAW
£20.00
NIBBLER 110v JN1601 1.6mm CAPACITY
£25.00
NIBBLER 110v JN3200 3.2mm CAPACITY
£30.00
RIDGID 590L DRY CUT SAW 5" CAPACITY
£40.00
MAKITA 18v CIRC METAL CUT SAW (136mm BLADE)
£26.00
RIDGID STUD CUTTER M8 OR M10
£12.00
HITACHI CORDLESS STUD CUTTER M10
£30.00
ARMORGARD CUTTING STATION (does not include chopsaw)
£46.00
Blades for the above tools sold seperately POA
PLASMA CUTTERS (Requires compressor 8cfm)
weekly
415v PC60 CUTTER
£115.00
415v PC105 CUTTER
£140.00
9CFM COMPRESSOR 110v 32amp
£38.00
www.broughtonplanthire.co.uk
43
SITE SERVICES
Southern Depot : 01708 383350
Midlands Depot : 01773 609789
South West Depot: 01275 875587
44
SITE SECURITY & STORAGE SITE BOX 1m x 480 x 480 SITE BOX 1.2m x 600 x 600 SITE CHEST 1.52m x 860 x 760 SITE CHEST 1.52m x 1.2 x 800 CHEMICAL STORE ARMORGARD BARRO BOX ARMORGARD SITESTATION ARMORGARD POWERSTATION ARMORGARD ROLLING WORK BENCH C/W CHAIN VICE & ENG VICE
weekly £12.00 £12.00 £16.00 £16.00 £28.00 £12.00 £49.00 £29.50 £27.50
All above can be supplied with fitted castors
ARMOURGUARD CUTTING STATION (does not include chopsaw) BOTTLE CAGES 1800 x 850 x 850 BOTTLE CAGES COLLAPSABLE SITE SECURITY FENCING PER PANEL SECTIONAL STEEL SITE HUTS MOBILE STORAGE CAGE 1800 x 1200 MOBILE FITTINGS STORE DOUBLE FITTINGS STORE COPPER COFFIN 3m COPPER COFFIN 6m
MOBILE PIPE RACKS
£46.00 £16.00 £18.50 £3.90 POA £22.00 £16.00 £20.00 £15.00 £25.00
weekly
1 TON CAPACITY 3m - FOLDING PIPE RACK
£26.00
2 TON CAPACITY 3m - 2 PIECE COLLAPSABLE 3.2 TON CAPACITY 6m - 3 PIECE COLLAPSABLE
£26.00 £34.00
GENERATORS
weekly
2.7 KVA PETROL 3.4 KVA PETROL 5 KVA PETROL 4 KVA DIESEL 6 KVA DIESEL 7 KVA DIESEL SUPER SILENCED 10 KVA DIESEL SUPER SILENCED TIN 12 SPEC BRUSHLESS GENERATOR FOR USE WITH ELECTRO FUSION MACHINE JERRY CAN 205lt DIESEL DRUM www.broughtonplanthire.co.uk
£38.00 £46.00 £62.00 £62.00 £75.00 £80.00 £95.00 £60.00 £2.50 SALE ONLY
45
TRANSFORMERS
weekly
3 KVA PORTABLE TWIN 16amp 110v 5 KVA PORTABLE TWIN 16amp 110v + SINGLE 32amp 5 KVA, SINGLE PHASE 10 KVA, SINGLE OR THREE PHASE 3.5v KVA STEP UP 110V TO 240v 16amp TRANSFORMER
EXTENSION LEADS
£6.50 £9.50 £14.00 £20.00 £16.50
weekly
2.5mm CABLE 14m 110v 16amp 4mm CABLE 14m 110v 32amp 3 PHASE 415v 32amp 15m SPIDER BOX 110v 16amp
£3.00 £4.50 £10.50 £3.50
SITE LIGHTING
weekly
FESTOON LIGHTING PER 25m FLUORESCENT TASK LIGHT 1.2m ON STAND FLUORESCENT LINK LIGHT 600mm ON FLOOR STAND FLUORESCENT EMERGENCY BACK UP LIGHT ECO LIGHT 110v SUPALITE K9 PORTABLE WORK LIGHT
PUMPS
£6.50 £6.50 £6.50 £12.50 £7.50 £25.00
weekly
110v 2" SUBMERSIBLE 50 GPM 110v 1" PUDDLE PUMP / SUBMERSIBLE PETROL TRASH PUMP 3" INLET/OUTLET TRANSFER PUMP 110v REMS SOLAR PUSH K60 FLUSHING CLOSED SYSTEMS
£40.00 £40.00 £90.00 £40.00 £58.00
C/W CHANGEOVER VALVE
VACUUM CLEANERS
weekly
DRY / WET VAC SINGLE MOTOR 110v 16AMP
£32.00
DRY / WET VAC TWIN MOTOR 110v 32AMP
£42.00
LASER LEVEL
weekly
Lasermark LM800 Dual Grade
Southern Depot : 01708 383350
£65.00
Midlands Depot : 01773 609789
South West Depot: 01275 875587
ELECTRICAL CABLE CRIMPING & CUTTING
47
CRIMPING TOOLS
weekly
Manual hydraulic crimping tool HT131-C For use on Copper lugs
10-400 mm2
£95.00
Hydraulic crimping head c/w foot pump ECW-H3D For use on Copper lugs
10-630 mm2
£165.00
Cordless 18 volt crimping tool Ridgid RE60 For use on Copper lugs
10-300 mm2
£95.00
CUTTING TOOLS
weekly
Hydraulic cutting tool HT-TC051 For cutting standard copper or aluminium cable to maximum diameter of 50mm
£55.00
Hydraulic cutting tool HT-TC0851 For cutting standard copper or aluminium cable to maximum diameter of 85mm
£85.00
Hydraulic cutting head c/w foot pump TC120 120mm max For cutting standard copper or aluminium cable to maximum diameter of 120mm or 4 core armoured cable with a maximum diameter of 80mm
£130.00
Hydraulic cutting head (no foot pump) TC 120 For cutting standard copper or aluminium cable to maximum diameter of 120mm or 4 core armoured cable with a maximum diameter of 80mm
£85.00
Cordless 18 volt cutting tool Klauke For cutting standard copper or aluminium cable to maximum diameter of 45mm
£60.00
Cordless 18 volt cutting tool B-TC500E For cutting standard copper or aluminium and telecommunication cable to maximum diameter of 50mm
£65.00
Cordless 18 volt cutting tool B-TC950 For cutting standard copper or aluminium and telecommunication cable to maximum diameter of 95mm
£85.00
Southern Depot : 01708 383350
Midlands Depot : 01773 609789
South West Depot: 01275 875587
INDEX
page
A A frame gantry Acetylene Cylinder Angle Drill Angle Grinder Axxair Cutter Aquatherm socket fusion
37 27 39 42 20 23
B Barrel Bund Barrel Pump Band-saw Benches and vices Bottle Cages Builders Steps Barro Box
26 26 42 21 44 30 44
C Cable Crimping/Cutting 47 Cable Jacks 37 Cantilever Towers 29 Cast iron tools 22 Cembre Hydraulic Crimping Tool 47 Chain Blocks 36 Chain Wrenches 17 Chemical Store 44 Chop Saw 42 Combination Ladder 31 Compressor 19 Concrete Breaking 40 Cordless Angle Grinder 18v 42 Cordless Drilling Fixing 40 Conex Banninger B Press 13 Copper Cutters 20 Copper Coffins 44 Copper tools 22 Cordless Shark Saw 42 Core Drills 40 Counter Balance Floor Crane 36 Cross Cut Mitre Saw 42 Cut & Weld Kit 27 Cutting Station 42, 44
D D Shackles Dealing Desk Towers Diesel 205L Drum Drain Bungs Drain Testing Drip Tray Dry Diamond Core Drilling Dry Cut Saw 14" Dry Vac Due Cento
37 30 44 19 19 17 40 42 45 20
E Electro Fusion Machine Enfusion Electrical Cable Crimping & Cutting Electric 110v Bender Extension Ladder Extension Leads Eco Lift
24 24 47 21 31 45 33
F Festoon Lighting Fire Extinguisher Flat Bed Trolley Floor Crane Fluorescent Emergency Back up Light Fluorescent Link Light Fluorescent Task Light Foldeasy Towers Full Size Cylinder Trolley Fume Eliminator Filtration Extract Fume Extractor
45 26 36 36 45 45 45 30 27 26 26 26
Fusion Accessories Fusion Clamps Fusion Machine 5 kva Generator
page 24 24 24
G Gas purging Geberit HDPE Geberit Mapress Carbon Geberit Mapress Copper Geberit Mepla Genie GR Series Genie Material Lifts Genie Lift - Pipe Holding Kit Genie Scissor Lifts Generators GF Cut and Bevel Machine Girder Trolley / Clamp
19 23 6 5 7 33 35 33 33 44 20 37
H Hammer Drills Handling and lifting accessories Hand held threading machines Hilmor Stand Bender Hilmor Conduit Bender Hilmor Scissor Bender Hilti Range Horse Bench Hydraulic Cutting Tool Hydraulic Jacks
39 37 17 21 21 21 39 21 47 37
I Impact Wrench Inertia Reel Inverter Remote Control Inverter Welder
40 37 26 26
J Jerry Can Jigsaw
44 42
L Laser Level Lead Burning Kit Lead Melting Pot Ladle & Furnace Lighting Lightweight Staging Lincoln Mobiflex extractor
45 27 27 45 31 26
M Machine Guards Manual Pipe Cutters Man Riding Tripod Makita 18V Circ Manhole Lift Cradle Mid Size Cylinder Trolley Miller DC Inverter Minifor Mobile Fittings Store Mobile Pipe Racks Mobile Storage Cage Mobile Towers Monkey Tower Mini
17 20 35 42 36 27 26 37 44 44 44 29 30
N Nibbler Nipple Chuck Nitrogen Cylinders Nylon Machine Skates
42 17 27 37
O Orbital Cutters Oxy/Propane Cutting & Heating kit Oxygen Cylinder
20 27 27
P Pallet Trucks Pannel Lifter
36 36
Petrol Saw 12" Petrol Trash Pump Pipe Assembly Tool Pipe Bending Hydraulic Pipe Bogey Pipe Freezers Pipe Holding Kit (Power Tower) Pipe Roller Stands RJ98 Pipe Stilsons Pipe Support Pipe Threading Pipe Testing Plasterboard Trolley Plasma cutters Platform Steps Podium Steps Points/Chisels Polypipe HDPE Polypipe Presstools Pop Up Products Porta Pack Cylinder Trolley Portable Handling Portable telescopic gas hoist Portastore Powered Pipe Cutters Powerstation - Armorguard Power Tower Products Pressure testing Press system accessories Propane equipment Propane Torch Propane Torch Kit & Cylinder Puddle Pump Pulling Tool Pumps Push around vertical Peco
page 42 45 22 21 36 21 33 17 17 17 17 19 36 42 31 30 40 23 14 33 27 36 35 44 20 44 33 19 15 27 27 27 45 22 45 33 33
R Ratchet Hand Dies Receder Reciprocating Shark Saw Record 45 Rehau Presstools Rems Amigo Rems Curvo 110v Bender Rems Eskimo Freezer Rex Threading Machine Ridgid Threading Machine Ridgid 258 Ridgid 258XL Ridgid 2A Pipe Roller Cutter Ridgid 300c Threading Machine Ridgid 466 Hinged Four Wheel Cutter Ridgid 4S Pipe Roller Cutter Ridgid 550 reciprocating saw Ridgid 690 Ridgid 6S Pipe Roller Cutter Ridgid 868 Hinged Four Wheel Cutters Ridgid 915 Insitu Portable Ridgid 915/914 Portable Roll grooving Ridgid 916 Portable Roll Groover Ridgid 918 Groover, Power Drive Ridgid 918 Hydraulic Groover Ridgid 918 Stabilizer Kit Ridgid 975 Combo Insitu Ridgid Die Head Ridgid Hand Test Bucket Ridgid HC450 Hole Cutter Ridgid RE60 Crimping Tool Rod Quiver Rolling Crow Bar Rolling Work Bench Roustabout
17 17 42 22 14 17 21 21 17 17 20 20 20 17 20 20 20 17 20 20 18 18 18 18 18 18 18 18 17 19 18 47 26 37 44 35
Rotary Drills Rotary Hammer Drill Cordless Roto Broach Rubber Drain Test Bags
page 39 39 39 19
S Sales Items Sack Barrow Safety Harness Sanha Carbon Steel Sanha Copper Sanha Multi Layer Sanha Stainless Steel Self-propelled access SDS Hammer Drill Sectional Steel Site Huts Sherpa Scopic Steps Sheer legs Site Box Site security Site Security Fencing Site Station Site storage Skorp Cutter Slings Snap Cutter Snorkel Squeeze Off Tool Stair Climbing Sack Barrow Stairway Towers STIHL saw Stud Cutter Submersible pump
3 36 37 11 10 11 11 33 39 44 30 35 44 44 44 44 44 20 37 22 33 24 36 29 42 42 45
T Tig set Tirfor Winch Transformers Tripod Vice Tubela Ratchet Bender Tubela Rotary Scissor Bender
26 37 45 21 21 21
U Uponor Multi-Layer
14
V Vacumn cleaners Victaulic Adjustable Pipe Stand Victaulic 272SFS Roll Grooving Victaulic VE416 FSD Viega presstools
45 18 18 18 12
W Water Test Pump Wavin Welder Generators Welders Welding accessories Welding Clamps Welding Leads Welding Screen Welding Shelter Wet Vac Winch Work Benches
19 13 26 26 26 26 26 26 26 45 37 21
Y Pegler Yorkshire Xpress Carbon/stainless Pegler Yorkshire Xpress Copper Pegler Yorkshire Xpress Multi Layer Youngman X3 Series
9 8 9 33
Broughton Plant Hire was formed in 1984 as a trading division of Michael Broughton Ltd Est 1969 and specialises in the hire and sale of plant and equipment to the mechanical, electrical and fire protection industries. Now established in the industry for over 30 years Broughton Plant Hire has a wealth of experience and expertise throughout the business from our engineers and depot staff through to our hire desk and management team. This combined with our commitment to ensure that our customers receive the best service possible and a constant investment in our hire fleet has allowed us to build a reputation in the industry of supplying our customers with quality tools and equipment at short notice. Broughton Plant Hire and Sales has a wide and extensive fleet of small tools, plant and equipment and are the market leaders in the hiring, servicing and maintenance of pressfitting tools. We are an approved tool provider and calibration centre for a number of press fit manufacturers such as Geberit, Pegler Yorkshire, Sanha, Viega, Wavin and IBP Conex. We are also a specialist supplier in low level access and operate and maintain a large fleet of podium steps and push around vertical lifts. We are proud distributors and service agents for the following manufacturers: Ridgid, Novopress, Rems, Power Tower, Youngmans and Armorgard Security Products. We currently have 3 depots located in Essex, the Midlands and Bristol from which we operate a fleet of over 35 vehicles
Head Office; Southern Depot Unit 10 Trade City, Ashton Road, Romford, Essex, RM3 8UJ t: 01708 383350
Midlands Depot
South West Depot
Midlands Depot Unit B1, Venture Crescent, Motorway Lnk Industrial Estate, Alfreton DE55 7RA t: 01773 609789
Southern Depot
South West Depot 31-32 Hither Green Industrial Est. Clevedon, Bristol, BS21 6XU t: 01275 875587
Head Office; Southern Depot Unit 10 Trade City, Ashton Road, Romford, Essex, RM3 8UJ t: 01708 383350 Midlands Depot Unit B1, Venture Crescent, Motorway Lnk Industrial Estate, Alfreton DE55 7RA t: 01773 609789 South West Depot 31-32 Hither Green Industrial Est, Clevedon, Bristol, BS21 6XU t: 01275 875587 e: hire@mbroughtonltd.co.uk www.broughtonplanthire.co.uk