ValveLink DTM Installation Overview The ValveLink DTM is part of an open solution for field device management that enables configuration, monitoring, calibration, diagnostics and testing of FIELDVUE digital valve controllers. A USB hardware key or a software license key is required for enabling the license of ValveLink DTM software.
Note Frame application supporting FDT 1.2 and addendum is required.
Table 5-1 shows ValveLink DTM capabilities. Table 5-1. ValveLink DTM Capabilities Capability Min Tag Limit
Product Type Unlimited
Max Tag Limit
Unlimited Valve Signature Test
Dynamic Error Band
Drive Signal Test
Step Response
Step Response Analysis and Overlay
Performance Step Test
Status Monitor
Stroke Valve
I/P & Relay Integrity
Travel Deviation
Supply Pressure (DVC6000/DVC6200 only)
Relay Adjustment (DVC6000/DVC6200 only)
Air Mass Flow (DVC6000/DVC6200 only)
One Button Diagnostic
Valve Friction / Deadband Estimation
Valve Friction / Deadband Trending
Profiler
Triggered Profile
SIS Support (Includes SIS Partial Stroke Test) (DVC6000/DVC6200 only)
Batch Runner
Firmware Download
Temporary Instrument Level StepUp
Instrument Level StepUp
Advanced Diagnostics Note: Advanced Diagnostics can only be run when the instrument is out of service.
Performance Diagnostics Note: Performance Diagnostics are available for DVC5000, DVC6000, and DVC2000 digital valve controllers when using ValveLink Solo and AMS Device Manager, including the HART Multiplexer Interface. Performance Diagnostics are available for DVC6000 and DVC2000 digital valve controllers when using the AMS System Interface with Ovation, PROVOX, or DeltaV control systems.
indicates capability available
5-2
ValveLink Software