Type Vee-Ball Section 4 Parts
HD Metal Ball Seal Retrofit Kits for ISA S75.04 Face-to-Face Valves VALVE SIZE, INCHES
Parts Ordering A serial number is assigned to each valve and stamped on the nameplate. Always refer to the valve serial number when corresponding with your Fisher Controls sales office or sales representative regarding spare parts or technical information. When ordering replacement parts, also specify the complete 11-character part number from the parts kits or parts list information.
Note For the 2-inch Design V150 valve, this manual covers only valves with serial numbers 12551183 and higher. Always reference the serial number of your valve when corresponding with your Fisher Controls sales office or sales representative.
Repair Kits Seal repair kits include recommended spare parts for Fisher TCM Plus, S31600 stainless steel, CF10SMuN, or CD7MCuN ball seal constructions. The following table indicates the repair kit part number and the quantity of parts included in the kit.
30
Section 4 RETROFIT KIT NUMBER FOR HD METAL BALL SEAL
For WCC Steel Seal Protector Ring
CF10SMnN (Nitronic 60) Seal Material
CD7MCuN (Alloy 255 Duplex SST) Seal Material
2(1) 2(2) 3 4 6 8 10 12(3)
RV150X0R012 RV150X0R152 RV150X0R022 RV150X0R032 RV150X0R042 RV150X0R052 RV150X0R062 RV150X0R072
RV150XCR012 RV150XCR152 RV150XCR022 RV150XCR032 RV150XCR042 RV150XCR052 RV150XCR062 RV150XCR072
For CG8M (317 SST) Seal Protector Ring
CF10SMnN Seal Material
CD7MCuN Seal Material
2(1) 2(2) 3 4 6 8 10 12(3) Parts Included in Kit
RV150X0R082 RV150X0R162 RV150X0R092 RV150X0R102 RV150X0R112 RV150X0R122 RV150X0R132 RV150X0R142
RV150XCR082 RV150XCR162 RV150XCR092 RV150XCR102 RV150XCR112 RV150XCR122 RV150XCR132 RV150XCR142
Key No.
Description
3 11 13 15 21 22 37 41(5)
Seal Protector Ring Ball seal Wave spring Gasket Retainer screw Retainer washer Radial seal Retaining ring
Q antity in Kit Quantity 1 1 1 1 2 or 4(4) 2 or 4(4) 1 1
1 1 1 1 2 or 4(4) 2 or 4(4) 1 1
1. V150’s only for serial numbers below 12551183. 2. V150’s for serial numbers 12551183 and above. All V200’s and V300’s. 3. Design V200 is not available in 12-inch sizes. 4. A quantity of 2 is supplied for 1- through 8-inch valves, and a quantity of 4 is supplied for 10- and 12-inch valve kits. 5. Retaining rings (key 41) are supplied for sizes 10- and 12-inch valve kits.