Instruction Manual
DVC6200 Digital Valve Controller
D103409X012
June 2011
Section 8 Parts88 Parts Ordering Whenever corresponding with your Emerson Process Management sales office about this equipment, always mention the controller serial number. When ordering replacement parts, refer to the 11‐character part number of each required part as found in the following parts list. Part numbers are shown for kits and recommended spares only. For part numbers not shown, contact your Emerson Process Management sales office.
WARNING Use only genuine Fisher replacement parts. Components that are not supplied by Emerson Process Management should not, under any circumstances, be used in any Fisher instrument. Use of components not supplied by Emerson Process Management may void your warranty, might adversely affect the performance of the instrument, and could cause personal injury and property damage.
Note Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use, and maintenance of any product. Responsibility for the selection, use, and maintenance of any product remains with the purchaser and end user.
Parts Kits Kit
Description
1*
Elastomer Spare Parts Kit (kit contains parts to service one digital valve controller) Standard Extreme Temperature option (fluorosilicone elastomers)
2*
3*
4*
Part Number
Terminal Box Kit, aluminum Standard Standard, Natural Gas approved Extreme Temperature option (fluorosilicone elastomers) Extreme Temperature option (fluorosilicone elastomers) Natural Gas Approved
5* I/P Converter Kit Standard For Extreme Temperature option (fluorosilicone elastomers)
*Recommended spare parts
Description
6*
Spare Module Base Assembly Kit, aluminum [kit contains module base (key 2); drive screws, qty. 2, (key 11); shield/label (key 19); hex socket cap screw, qty. 3, (key 38); self tapping screw, qty. 2 (key 49); pipe plug, qty. 3 (key 61); retaining ring, qty. 3 (key 154); screen (key 236); and flame arrestors, qty. 3 (key 243)] GE18654X012
7*
Spare Housing Assembly Kit, aluminum [kit contains housing (key 1); vent assembly (key 52); seal (only included in Housing A kits) (key 288); seal (key 237); O‐ring (key 34); O‐ring (only used with integrally mounted regulator) (key 5)]
19B5402X012 19B5402X022
Small Hardware Spare Parts Kit (kit contains parts to service one digital valve controller) 19B5403X012 Seal Screen Kit [kit contains 25 seal screens (key 231) and 25 O‐rings (key 39)] Standard and Extreme Temperature option (fluorosilicone elastomers)
Kit
Part Number
14B5072X182 Housing A (used for GX actuator) Standard (nitrile elastomers) Extreme Temperature option (fluorosilicone elastomers) Housing B (used for all actuators except GX) Standard (nitrile elastomers) Extreme Temperature option (fluorosilicone elastomers)
19B5401X012 19B5401X032
19B5401X022 19B5401X042
8*
Spare I/P Shroud Kit [kit contains shroud (key 169) and hex socket cap screw, qty. 4 (key 23)]
GE48798X012 GE48798X022 GE48798X052 GE48798X062
GE29183X012
38B6041X152 38B6041X132
111