5 STEPS TO SETUP WIFI REPEATER WIZARD USING WPS METHOD
STEP 1 The first step is to plug in the wireless repeater in the power outlet. It must be kept between the router and the area with no Wi-Fi signal.Simultaneously push the WPS buttons available on both the device's router and repeater.
STEP 2 Tap the WPS button until it gets turned ON.Now check the status of the WPS connection by monitoring the WPS LED.As soon as the LED turns ON, you can simply place the wireless repeater in between the router and wireless device.
STEP 3 Once the LED light changes to the solid green color, it means the repeater has successfully connected to the Wi-Fi repeater.In the next step, you have to open any of the browsers.
STEP 4 Then start searching for the IP address 192.168.10.1.Log in by using the default login credentials i.e. username as admin and password as admin.
STEP 5 Thus, successfully you have completed the wireless repeater setup.Once the process gets completed, click on the finish button. Therefore, the connection between the repeater as well as the router has successfully been set up.
192.168.10.1 WiFi Repeater Wizard