How To Fix The Most Common Problems In Washing Machines

How To Fix The Most Common Problems In Washing Machines Undoubtedly, washing machines are one of the best home appliances ever created. It has eased the washing process to a great extent. An automatic washing machine does the entire washing process on its own. A semi-automatic one, however, needs help with washing, rinsing, and spinning at regular intervals. Irrespective of the type of washing machine you own, you might encounter a few problems every now and then.

We have made a list for you to resolve some common issues on your own.

1. Start and Stop – Improperly fitted power chord is one of the key reasons for this issue. Check the power chords of the washing machine and plug them well. Also, make sure the settings you have entered. Lock the doors and verify adequate water flow from the tap connection. The overloaded machine obstructs the washing process.

The machine may indicate the issue through an error message on the LED Display. If you own a Samsung washing machine and want a further guide on this, you can contact Samsung washing machine customer care.

2. Draining of water – Obstruction in drain pipes results in an incomplete rundown.

Lint, sock or a small piece of the garment may have been stuck at the drainage point, causing the water to be idle inside the machine. You should remove the drainage pipe and get rid of the water and clean it. You can also perform a tub clean for better performance.

3. The Machine noise – Many times the smaller garments can fly out of the tub, producing noise from the machine. Loose buttons from jeans and leftover coin from pocket may also get loose and make such noises. Always check for free and loose buttons and don’t forget to empty the pockets before you put clothes to wash in the machine. If your Whirlpool washing machine still making unwanted sound, you should contact the whirlpool washing machine service center for further resolution and complete solution to the issue.

4. Water leakage – Use of the washing machine for a long time causes wear & tear.

Damages to the pipes are very common if the water in your area is harsher, creating holes in the water drainage pipe. Remove the pipe which has developed holes and replace it with a new one. If the problem is with the motor, you will have to call a technician for repair.

5. Non-functional detergent dispenser – Use of detergent powder has a high chance of blockage at the mouth of the detergent dispenser. Don’t forget to check for the recommendations for particular detergent usage.

6. Smelly machine -A little bit of water stays in the drainage pipe each time you wash.

This could be due to the inappropriate alignment of the drainage pipe. You must empty, clean and set it at the right level.

7. Failure in the function/cycle getting selected – A problem may occur with the timer or the display board and it leads to improper selection of services. To resolve this, you need to change the display and replace it with a new one. You can get the replacement from the same brand service center.

Washing Machine - Maintenance Tips 

Clean the machine when required



Keep the machine free of lint



Clear any mark and detergent stains



Keep your machine’s manual handy

Regular cleaning and servicing of your washing machine or refrigerator can prolong the longevity of the machine. You must take care of maintenance, so there is no trouble with service from your washing machine. If you own a whirlpool washing machine and refrigerator, you can contact the whirlpool refrigerator service center to resolve any issue.