Air Compressor/Generator/Welder Combination
AGW Series
Two Stage Gasoline The AGW Series is designed for the contractor who needs power and welding capabilities. With Mi-T-M’s flexible installation, the AGW Series can be mounted with or without the tank on the back of a service truck, work trailer or in your shop to operate air tools, power lights or weld.
Operation Generator Mode l AC current only l Selector switch set to idle down l Switch is set to full throttle Welder Mode l DC current only l Engine must be running full throttle l Selector switch must be set to full throttle Compressor Pump l Splash lubricated l Stainless-steel braided discharge hose l Large canister intake filter l Oil level sight indicator Generator l Brush-type 2 pole 120V/240V alternator l Total harmonic distortion (THD) less than 6% l 100% copper windings Welder l Amperage selection switch, 170A or 220A maximum Frame l Powder coated ASME coded receiver tanks (not available on AGW-SR14-B) l 16-gauge powder coated belt guard (14-gauge on AGW-SH22-20M) Components l Regulator and two gauges for tank and outlet pressure l 16.5-inch fly wheel l Manual drain valves for proper maintenance AGW-SH22-20M
Limited Warranties:
2 Year
Pump Exchange
3 Year
Honda Engine NEMA L14-20R 120V/240v
See page 60 for information
2 Year
Alternator 58
5 Year
Subaru Engine
GFCI 5-20R
UM
20 & 30-Gallon Models
Mi-T-M Corporation · 50 Mi-T-M Drive · Peosta, IA 52068 · 800-553-9053 · 563-556-1235 fax · corp@mitm.com · www.mitm.com