STEP 3: CHOOSE ADAPTOR & OR MISC MOUNT RAM-B-202U
RAM-HOL-AQ2U
RAM-B-202U
Both are included to complete STEP 3
Both are included to complete STEP 3
+
DESCRIPTION: RAM 1” ball with round base, connects to cradle. The base has pre-drilled holes including the universal AMPS hole pattern. If required, the different hole patterns allow you to connect this plate flush to almost any type of existing hole pattern.
RAM-HOL-AQ3U
+
DESCRIPTION: RAM medium size aqua box Internal Dimensions: Width=2.88” Height=5.75” Depth=1.88" External Dimensions: Width=4” Height=6.5” Depth=2”
DESCRIPTION: RAM 1” ball with round base, connects to cradle. The base has pre-drilled holes including the universal AMPS hole pattern. If required, the different hole patterns allow you to connect this plate flush to almost any type of existing hole pattern.
Note: Lock not included with purchase of Aqua Box.
RAM-B-238U
DESCRIPTION: RAM small size aqua box Internal Dimensions: Width=2.38” Height=4.63” Depth=1.13" External Dimensions: Width=3.5” Height=5.25” Depth=1.5" Note: Lock not included with purchase of Aqua Box.
RAM-HOL-UN4U
RAM-B-132BU
RAM-B-202AU
DESCRIPTION: RAM universal finger griph holder, optimal for cell phones and radios.
DESCRIPTION: The self-leveling drink cup holder.
DESCRIPTION: Universal RAM camera base
Both are included to complete STEP 3
+
DESCRIPTION: RAM 1” ball with diamond base, connects to cradle.
The universal finger grip holder has four flexible rubber coated fingers placed along sides to grip your device. The fingers open by squeezing the ends to open the small finger arms. The bottom of the holder includes a back plate that adds support to the device being held by the mount.
The holder is hinged at two points to a holding frame. The hinges allow the cup holder to stay level no matter how much the holding frame tips.
The Universal camera base has a 1” diameter rubber ball connected at right angles to a 2.5” diameter base with a centered 1/4''-20 thread. The base adds support to the thread, by allowing the camera to rest on the plate, creating a stable connection with the camera. Note: The male 1/4'' long, 1/4''-20 thread in the middle of the 2.5'' diameter base will connect to the standard female thread found at the bottom of most still and video cameras.
NOTE: Unless stated, the RAM-B-238U (diamond) is the only adaptor that will attach to RAM cradles. The RAM-202U (round base) is the only adaptor that will attach to the Aqua Boxes and RAP-300-1 (radar detector) mount.
18
WWW.RAM-MOUNT.COM