following parameters in Figure 5-24.
Figure 5-24 SNMP Settings
5.9.1
Community Setting
Selecting SNMP > Community Setting will allow you to configure the SNMP community as shown in Figure 5-25, which is helpful for managing the access authority.
Figure 5-25 Community Setting ¾
Num - Displays the entry number of the community.
¾
Community - Defines the password used to authenticate the management station to the device.
¾
Access Mode - This field allows you to specify the authority of the community. Read Only means the community is only permitted to read the device configuration. Read&Write means the community has the authority to read and change the device configuration.
¾
Status - This field allows you to enable/disable the corresponding entry.
¾
Modify - This field allows you to modify an entry.
To modify a community setting entry: 1. Find the desired entry in the table. 2. Click Modify as desired on the Modify column. 3. Modify the contact of community 4. Select the Read Only or Read&Write option in the Access Mode pull-down list. 5. Select the Enabled option in the Status pull-down list. 6. Click the Save button. Click the Enable All button to make all entries enabled. Click the Disable All button to make all entries disabled.
88