Page 1

EXPERIENCE QUALITY WATER

Screens out larger foreign sediments and extends the life of your HomePure water filtration systems.


EXPERIENCE QUALITY WATER

Does rust and dirt from your water supply reduce the performance of your HomePure 7-Stage Water Filtration System and HomePure Eaze?


EXPERIENCE QUALITY WATER

The HomePure Prefilter is made with polypropylene and removes suspended solids larger than 5 microns (5/1000 mm) like rust residues, mud and sand. The small pore size sediment prefilter is designed to help increase the clarity of water.

The HomePure Prefilter prepares your water for final filtration. It is also designed for use at the sink, shower or any outlet you choose. Its modern and compact size allows for easy installation – just connect the inlet and outlet and use.


KEY BENEFITS User Friendly - Easy and quick one-touch fitting connection and filter change. Safety guarantee - Made from NSF-approved materials.

Encapsulated Filter - Encapsulated for clean and safe filtration process without contamination from the outside.


REMOVAL RATE OF PREFILTER

Flow Rate (LPM)

2.5

Removal Efficiency (%) 1.2 µm

3 µm

5 µm

7 µm

10 µm

15 µm

40

70

80

90

95

95

At a flow of 2.5 litres per minute the prefilter: • Removes 40% of total particles the size of 1.2 micron • Removes 80% of total particles the size of 5 micron • Removes 95% of total particles the size of 10 micron


SPECIFICATIONS

Filter Housing Size:

ᴓ66*294 mm.

Operating Pressure: 2.4-6.8 bar Operating Temperature:

2 – 38°C

Inlet water condition: Cold or room temperature water only Estimated life:

2,600 litres or 6 months*

*The life of the HomePure Prefilter depends on the quality of water. (Based on the usage of 12 litres per day).


SUGGESTED APPLICATIONS

• • • • • •

HomePure 7-Stage Water Filtration System and HomePure Eaze Dish washer Coffee maker Ice maker Washing machine Any sink or shower socket


EASY INSTALLATION

Check package for all components: • ¼ inch elbow fitting: 2 pieces • Sediment filter

Connect the inlet water pipe to the first elbow and the outlet water pipe to the second elbow.

Release the covers of the sealed nozzles.

Connect the outlet water pipe to your HomePure water filtration system.

Connect both the ¼ inch elbow fittings to the nozzles.

• •

Before operating, slowly turn on the diverter valve to let water into the system. Check for water leakage before flushing. Flushing before use: If the prefilter is new or has not been used for a long time, allow the water to flow for 10 minutes to flush possible residual particles and air out of the prefilter.


USAGE GUIDE • • • • • • •

• • • •

Use with HomePure water filtration systems. Use with municipal tap water. Do not use with water that is microbiologically unsafe. Do not use with water of unknown quality without adequate disinfection before or after the prefilter. Check connection between all parts before use. Flush the filter cartridge at time of installation, cartridge change and before using it after a long time. Turn off the valve if prefilter is not going to be used for a long time (for protection from water leak from high water pressure). Turn off the valve if you see a water leak. Change cartridge regularly to prevent deterioration of water quality. Lifespan of the HomePure Prefilter can vary according to tap water quality. Use with optimal water pressure and temperature.


EN Homepure prefilter product presentation apr 2014