Operation & Maintenance Methods for Zipper Testing M

Operation & Maintenance Methods for Zipper Testing Machine of Reciprocating Pull

Zipper Testing Machine of Reciprocating Pull：

Zipper Testing Machine of Reciprocating Pull used to define the garment manufacturer's responsibility to ensure the buttons, push device and fasteners can be properly secured in the garment to prevent buttons from clothing, resulting in the risk of the baby a chance to swallow. Therefore, all the buttons on clothing, buttons and fasteners required strength testing through testing instrument.

Zipper Testing Machine of Reciprocating Pull Product Introduction： It is used to detect the fixing strength of button and push device.

The component is the concave pincers with no claw, fabric bottom pincers Imada Force.

Button component is fixed by the concave pincers with no Claw; clothing is fixed by the fabric bottom clamp. By rotation of the upper flywheel, the user can apply a certain force, and record the fixed strength or break strength. Using clamps and accessories, the instrument can also test other button, Jeans button, four-hole buttons and clothing accessories such as zippers, tie, decals, hooks, D-rings and others.

Zipper Testing Machine of Reciprocating Pull Specifications: Dimensions: 280 × 220 × 770 mm (L × W × H) Weight: 23 kg Zipper Testing Machine of Reciprocating Pull 30kg Imada Force Testers 1 One set of general public button jig one set of general mother button clamp 1 fabric bottom fixture one trielcon Standard pressing tool 17

Accessories:

Zipper Testing Machine of Reciprocating Pull Significanceďźš 1. This instrument is used as a measure of the test methods and coin laundry is vertical pull strength test, and buttons and the button is not pulled out to the laundry 2.This method in accordance with the specifications required for button sewing standards set by the manufacturer should be; 3.This test method is used to correlate different dress environment, as well as to compare different brands and types of buttons.

4. This standard may involve hazardous materials, operations and equipment, and there is no standard in the use of all possible security problems listed. Therefore standard user responsibly to establish rules related to safety and health, as well as prior to use to determine the appropriate ordinances 5. All buttons are required with a chain tight clothing sewn in the fabric; 6.In accordance with the requirements of the test, when the maximum coin size is less than or equal to 6mm larger than 6mm, the button will change to be able to withstand the pull of 50N and 90N respectively.

Zipper Testing Machine of Reciprocating Pull Advantages: 1. It can handle up to improve the test table and fixed location, easy to replace the sample 2. Lateral type round operation, with ergonomic design, so that the operator is more comfortable.

3. Security lock design, operation more safe and reliable 4. With specialty chassis, so that a wider range extends test 5. Under the cloth clamp, fittings, holding stable, easy to use 6. Spring Design centrally, greatly enhance marketing efforts and ensure tight test repeatability.ďź› 7. Folder on the button clamp with a variety of clamps for different sample button 8. Design is the most convenient and can reduce the sample during the test due to damage caused by slippery drain Zipper Testing Machine of Reciprocating Pull Operation: 1. Equipped with the fixture, with the test button, the test model locked to the base.

2. Put down clamp, pull on the buttons to step up, each button can be required to withstand a minimum of 17 lbs pull (ie, 7.72kg) and the need for 10 seconds without signs of loose or damaged, simultaneously test 20 each button, which considered qualified.

3. If one of them which test button loose or damaged, it must be replaced and then do test.

Zipper Testing Machine of Reciprocating Pull Daily Maintenanceďźš Do not overload to use, the instrument rated load of 300N Pay attention to the routine maintenance work, keep the instrument clean the parts During usage when the instrument is inflexible running, please add a little oil lubrication

on both sides of the machine especially on the bearing seat hole refuels. Please contact us in time when there was the machine failure.

Zipper Testing Machine of Reciprocating Pull More Information view on: http://www.qinsun-lab.com/Products/zipper-reciprocating-fatigue-tester.html

You can follow as below, Qinsun Instruments Co., LTD, Address: No. 258 Banting Road, Shanghai, Zip Code: 201199 Phone: +86-21-6420 0566 Fax: +86-21-6420 0566-810 E-mail: info@qinsun-lab.com website: www.qinsun-lab.com.